drm/i915: State readout and cross-checking for ddi_pll_sel

To make things a bit more manageable extract a new function for
reading out common ddi port state. This means a bit of duplication
between encoders and the core since both look at the same registers,
but doesn't seem worth to make a fuzz about.

We can also remove the state readout code in intel_ddi_setup_hw_pll_state.
That code is only called from the hardware take over and not the cross
check code, and only after the crtc state is reconstructed. So we can
rely on an accurate value of crtc->config.ddi_pll_sel already.

Compared to the old code also trust the hw state more and don't
special-case port A - we want to cross-check the actual-state, not
bake in our own assumptions about how this is supposed to all be
linked up.

v2: Make use of the read-out ddi_pll_sel in intel_ddi_clock_get.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[imre: rebased on patchset version w/o pch/crt/fdi refactoring]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 32 insertions, 16 deletions

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 6332d9dda00f..e26df6783406 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7570,6 +7570,35 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 	return 0;
 }
 
+static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
+				       struct intel_crtc_config *pipe_config)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	enum port port;
+	uint32_t tmp;
+
+	tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
+
+	port = (tmp & TRANS_DDI_PORT_MASK) >> TRANS_DDI_PORT_SHIFT;
+
+	pipe_config->ddi_pll_sel = I915_READ(PORT_CLK_SEL(port));
+	/*
+	 * Haswell has only FDI/PCH transcoder A. It is which is connected to
+	 * DDI E. So just check whether this pipe is wired to DDI E and whether
+	 * the PCH transcoder is on.
+	 */
+	if ((port == PORT_E) && I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
+		pipe_config->has_pch_encoder = true;
+
+		tmp = I915_READ(FDI_RX_CTL(PIPE_A));
+		pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
+					  FDI_DP_PORT_WIDTH_SHIFT) + 1;
+
+		ironlake_get_fdi_m_n_config(crtc, pipe_config);
+	}
+}
+
 static bool haswell_get_pipe_config(struct intel_crtc *crtc,
 				    struct intel_crtc_config *pipe_config)
 {
@@ -7615,22 +7644,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
 	if (!(tmp & PIPECONF_ENABLE))
 		return false;
 
-	/*
-	 * Haswell has only FDI/PCH transcoder A. It is which is connected to
-	 * DDI E. So just check whether this pipe is wired to DDI E and whether
-	 * the PCH transcoder is on.
-	 */
-	tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
-	if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(PORT_E) &&
-	    I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
-		pipe_config->has_pch_encoder = true;
-
-		tmp = I915_READ(FDI_RX_CTL(PIPE_A));
-		pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
-					  FDI_DP_PORT_WIDTH_SHIFT) + 1;
-
-		ironlake_get_fdi_m_n_config(crtc, pipe_config);
-	}
+	haswell_get_ddi_port_state(crtc, pipe_config);
 
 	intel_get_pipe_timings(crtc, pipe_config);
 
@@ -10409,6 +10423,8 @@ intel_pipe_config_compare(struct drm_device *dev,
 
 	PIPE_CONF_CHECK_I(double_wide);
 
+	PIPE_CONF_CHECK_X(ddi_pll_sel);
+
 	PIPE_CONF_CHECK_I(shared_dpll);
 	PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
 	PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md);