drm/i915: clear up the fdi/dp set_m_n confusion

There's a rather decent confusion going on around transcoder m_n
values. So let's clarify:
- All dp encoders need this, either on the pch transcoder if it's a
  pch port, or on the cpu transcoder/pipe if it's a cpu port.
- fdi links need to have the right m_n values for the fdi link set in
  the cpu transcoder.

To handle the pch vs transcoder stuff a bit better, extract transcoder
set_m_n helpers. To make them simpler, set intel_crtc->cpu_transcoder
als in ironlake_crtc_mode_set, so that gen5+ (where the cpu m_n
registers are all at the same offset) can use it.

Haswell modeset is decently confused about dp vs. edp vs. fdi. dp vs.
edp works exactly the same as dp (since there's no pch dp any more),
so use that as a check. And only set up the fdi m_n values if we
really have a pch encoder present (which means we have a VGA encoder).

On ilk+ we've called ironlake_set_m_n both for cpu_edp and for pch
encoders. Now that dp_set_m_n handles all dp links (thanks to the
pch encoder check), we can ditch the cpu_edp stuff from the
fdi_set_m_n function.

Since the dp_m_n values are not readily available, we need to
carefully coax the edp values out of the encoder. Hence we can't (yet)
kill this superflous complexity.

v2: Rebase on top of the ivb fdi B/C check patch - we need to properly
clear intel_crtc->fdi_lane, otherwise those checks will misfire.

v3: Rebased on top of a s/IS_HASWELL/HAS_DDI/ patch from Paulo Zanoni.

v4: Drop the addition of has_dp_encoder, it's in the wrong patch (Jesse).

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 55 insertions, 31 deletions

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 181bd0e3228c..06dacca8257c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5373,15 +5373,47 @@ int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
 	return bps / (link_bw * 8) + 1;
 }
 
-static void ironlake_set_m_n(struct drm_crtc *crtc)
+void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
+				  struct intel_link_m_n *m_n)
 {
-	struct drm_device *dev = crtc->dev;
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int pipe = crtc->pipe;
+
+	I915_WRITE(TRANSDATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
+	I915_WRITE(TRANSDATA_N1(pipe), m_n->gmch_n);
+	I915_WRITE(TRANSDPLINK_M1(pipe), m_n->link_m);
+	I915_WRITE(TRANSDPLINK_N1(pipe), m_n->link_n);
+}
+
+void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
+				  struct intel_link_m_n *m_n)
+{
+	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	int pipe = crtc->pipe;
+	enum transcoder transcoder = crtc->cpu_transcoder;
+
+	if (INTEL_INFO(dev)->gen >= 5) {
+		I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
+		I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
+		I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
+		I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
+	} else {
+		I915_WRITE(PIPE_GMCH_DATA_M(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
+		I915_WRITE(PIPE_GMCH_DATA_N(pipe), m_n->gmch_n);
+		I915_WRITE(PIPE_DP_LINK_M(pipe), m_n->link_m);
+		I915_WRITE(PIPE_DP_LINK_N(pipe), m_n->link_n);
+	}
+}
+
+static void ironlake_fdi_set_m_n(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct drm_display_mode *adjusted_mode =
 		&intel_crtc->config.adjusted_mode;
 	struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
-	enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
 	struct intel_encoder *intel_encoder, *edp_encoder = NULL;
 	struct intel_link_m_n m_n = {0};
 	int target_clock, lane, link_bw;
@@ -5401,22 +5433,14 @@ static void ironlake_set_m_n(struct drm_crtc *crtc)
 		}
 	}
 
-	/* FDI link */
-	lane = 0;
-	/* CPU eDP doesn't require FDI link, so just set DP M/N
-	   according to current link config */
-	if (is_cpu_edp) {
-		intel_edp_link_config(edp_encoder, &lane, &link_bw);
-	} else {
-		/* FDI is a binary signal running at ~2.7GHz, encoding
-		 * each output octet as 10 bits. The actual frequency
-		 * is stored as a divider into a 100MHz clock, and the
-		 * mode pixel clock is stored in units of 1KHz.
-		 * Hence the bw of each lane in terms of the mode signal
-		 * is:
-		 */
-		link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
-	}
+	/* FDI is a binary signal running at ~2.7GHz, encoding
+	 * each output octet as 10 bits. The actual frequency
+	 * is stored as a divider into a 100MHz clock, and the
+	 * mode pixel clock is stored in units of 1KHz.
+	 * Hence the bw of each lane in terms of the mode signal
+	 * is:
+	 */
+	link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
 
 	/* [e]DP over FDI requires target mode clock instead of link clock. */
 	if (edp_encoder)
@@ -5426,9 +5450,8 @@ static void ironlake_set_m_n(struct drm_crtc *crtc)
 	else
 		target_clock = adjusted_mode->clock;
 
-	if (!lane)
-		lane = ironlake_get_lanes_required(target_clock, link_bw,
-						   intel_crtc->config.pipe_bpp);
+	lane = ironlake_get_lanes_required(target_clock, link_bw,
+					   intel_crtc->config.pipe_bpp);
 
 	intel_crtc->fdi_lanes = lane;
 
@@ -5437,10 +5460,7 @@ static void ironlake_set_m_n(struct drm_crtc *crtc)
 	intel_link_compute_m_n(intel_crtc->config.pipe_bpp, lane, target_clock,
 			       link_bw, &m_n);
 
-	I915_WRITE(PIPE_DATA_M1(cpu_transcoder), TU_SIZE(m_n.tu) | m_n.gmch_m);
-	I915_WRITE(PIPE_DATA_N1(cpu_transcoder), m_n.gmch_n);
-	I915_WRITE(PIPE_LINK_M1(cpu_transcoder), m_n.link_m);
-	I915_WRITE(PIPE_LINK_N1(cpu_transcoder), m_n.link_n);
+	intel_cpu_transcoder_set_m_n(intel_crtc, &m_n);
 }
 
 static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
@@ -5587,6 +5607,8 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
 	     "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
 
+	intel_crtc->cpu_transcoder = pipe;
+
 	ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
 				     &has_reduced_clock, &reduced_clock);
 	if (!ok) {
@@ -5625,7 +5647,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	} else
 		intel_put_pch_pll(intel_crtc);
 
-	if (is_dp && !is_cpu_edp)
+	if (is_dp)
 		intel_dp_set_m_n(crtc, mode, adjusted_mode);
 
 	for_each_encoder_on_crtc(dev, crtc, encoder)
@@ -5661,7 +5683,9 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 
 	/* Note, this also computes intel_crtc->fdi_lanes which is used below in
 	 * ironlake_check_fdi_lanes. */
-	ironlake_set_m_n(crtc);
+	intel_crtc->fdi_lanes = 0;
+	if (intel_crtc->config.has_pch_encoder)
+		ironlake_fdi_set_m_n(crtc);
 
 	fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
 
@@ -5773,15 +5797,15 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 	DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
 	drm_mode_debug_printmodeline(mode);
 
-	if (is_dp && !is_cpu_edp)
+	if (is_dp)
 		intel_dp_set_m_n(crtc, mode, adjusted_mode);
 
 	intel_crtc->lowfreq_avail = false;
 
 	intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
 
-	if (!is_dp || is_cpu_edp)
-		ironlake_set_m_n(crtc);
+	if (intel_crtc->config.has_pch_encoder)
+		ironlake_fdi_set_m_n(crtc);
 
 	haswell_set_pipeconf(crtc, adjusted_mode, dither);