drm/i915: Deal with NV12 CbCr plane AUX surface on SKL+

With NV12 we have two color planes to deal with so we must compute the
surface and x/y offsets for the second plane as well.

What makes this a bit nasty is that the hardware expects the surface
offset to be specified as a distance from the main surface offset.
What's worse, the distance must be non-negative (no neat wraparound or
anything). So we must make sure that the main surface offset is always
less or equal to the AUX surface offset. We do that by computing the AUX
offset first and the main surface offset second. If the main surface
offset ends up being above the AUX offset, we just push it down as far
as is required while still maintaining the required alignment etc.

Fortunately the AUX offset only reuqires 4K alignment, so we don't need
to do any of the backwards searching for an acceptable offset that we
must do for the main surface. And X tiled + NV12 isn't a supported
combination anyway.

Note that this just computes aux surface offsets, we do not yet program
them into the actual hardware registers, and hence we can't yet expose
NV12.

v2: Rebase due to drm_plane_state src/dst rects
    s/TODO.../something else/ in the commit message/ (Daniel)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-12-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 60 insertions, 2 deletions

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index ffb74196322a..21ec74ea77d2 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2463,8 +2463,14 @@ u32 intel_compute_tile_offset(int *x, int *y,
 	const struct drm_i915_private *dev_priv = to_i915(state->base.plane->dev);
 	const struct drm_framebuffer *fb = state->base.fb;
 	unsigned int rotation = state->base.rotation;
-	u32 alignment = intel_surf_alignment(dev_priv, fb->modifier[plane]);
 	int pitch = intel_fb_pitch(fb, plane, rotation);
+	u32 alignment;
+
+	/* AUX_DIST needs only 4K alignment */
+	if (fb->pixel_format == DRM_FORMAT_NV12 && plane == 1)
+		alignment = 4096;
+	else
+		alignment = intel_surf_alignment(dev_priv, fb->modifier[plane]);
 
 	return _intel_compute_tile_offset(dev_priv, x, y, fb, plane, pitch,
 					  rotation, alignment);
@@ -2895,7 +2901,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 	int h = drm_rect_height(&plane_state->src) >> 16;
 	int max_width = skl_max_plane_width(fb, 0, rotation);
 	int max_height = 4096;
-	u32 alignment, offset;
+	u32 alignment, offset, aux_offset = plane_state->aux.offset;
 
 	if (w > max_width || h > max_height) {
 		DRM_DEBUG_KMS("requested Y/RGB source size %dx%d too big (limit %dx%d)\n",
@@ -2909,6 +2915,15 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 	alignment = intel_surf_alignment(dev_priv, fb->modifier[0]);
 
 	/*
+	 * AUX surface offset is specified as the distance from the
+	 * main surface offset, and it must be non-negative. Make
+	 * sure that is what we will get.
+	 */
+	if (offset > aux_offset)
+		offset = intel_adjust_tile_offset(&x, &y, plane_state, 0,
+						  offset, aux_offset & ~(alignment - 1));
+
+	/*
 	 * When using an X-tiled surface, the plane blows up
 	 * if the x offset + width exceed the stride.
 	 *
@@ -2935,6 +2950,35 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 	return 0;
 }
 
+static int skl_check_nv12_aux_surface(struct intel_plane_state *plane_state)
+{
+	const struct drm_framebuffer *fb = plane_state->base.fb;
+	unsigned int rotation = plane_state->base.rotation;
+	int max_width = skl_max_plane_width(fb, 1, rotation);
+	int max_height = 4096;
+	int x = plane_state->src.x1 >> 17;
+	int y = plane_state->src.y1 >> 17;
+	int w = drm_rect_width(&plane_state->src) >> 17;
+	int h = drm_rect_height(&plane_state->src) >> 17;
+	u32 offset;
+
+	intel_add_fb_offsets(&x, &y, plane_state, 1);
+	offset = intel_compute_tile_offset(&x, &y, plane_state, 1);
+
+	/* FIXME not quite sure how/if these apply to the chroma plane */
+	if (w > max_width || h > max_height) {
+		DRM_DEBUG_KMS("CbCr source size %dx%d too big (limit %dx%d)\n",
+			      w, h, max_width, max_height);
+		return -EINVAL;
+	}
+
+	plane_state->aux.offset = offset;
+	plane_state->aux.x = x;
+	plane_state->aux.y = y;
+
+	return 0;
+}
+
 int skl_check_plane_surface(struct intel_plane_state *plane_state)
 {
 	const struct drm_framebuffer *fb = plane_state->base.fb;
@@ -2946,6 +2990,20 @@ int skl_check_plane_surface(struct intel_plane_state *plane_state)
 		drm_rect_rotate(&plane_state->src,
 				fb->width, fb->height, BIT(DRM_ROTATE_270));
 
+	/*
+	 * Handle the AUX surface first since
+	 * the main surface setup depends on it.
+	 */
+	if (fb->pixel_format == DRM_FORMAT_NV12) {
+		ret = skl_check_nv12_aux_surface(plane_state);
+		if (ret)
+			return ret;
+	} else {
+		plane_state->aux.offset = ~0xfff;
+		plane_state->aux.x = 0;
+		plane_state->aux.y = 0;
+	}
+
 	ret = skl_check_main_surface(plane_state);
 	if (ret)
 		return ret;