Merge tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for the 5.1 merge window.

  The big changes I'd highlight are:
   - nouveau has HMM support now, there is finally an in-tree user so we
     can quieten down the rip it out people.
   - i915 now enables fastboot by default on Skylake+
   - Displayport Multistream support has been refactored and should
     hopefully be more reliable.

  Core:
   - header cleanups aiming towards removing drmP.h
   - dma-buf fence seqnos to 64-bits
   - common helper for DP mst hotplug for radeon,i915,amdgpu + new
     refcounting scheme
   - MST i2c improvements
   - drm_syncobj_cb removal
   - ARM FB compression fourcc
   - P010 + P016 fourcc
   - allwinner tiled format modifier
   - i2c over aux I2C_M_STOP support
   - DRM_AUTH handling fixes

  TTM:
   - ref/unref renaming

  New driver:
   - ARM komeda display driver

  scheduler:
   - refactor mirror list handling
   - rework hw fence processing
   - 0 run queue entity fix

  bridge:
   - TI DS90C185 LVDS bridge
   - thc631lvdm83d bridge improvements
   - cadence + allwinner DSI ported to generic phy

  panels:
   - Sitronix ST7701 panel
   - Kingdisplay KD097D04
   - LeMaker BL035-RGB-002
   - PDA 91-00156-A0
   - Innolux EE101IA-01D

  i915:
   - Enable fastboot by default on SKL+/VLV/CHV
   - Export RPCS configuration for ICL media driver
   - Coffelake PCI ID
   - CNL clocks setup fixes
   - ACPI/PMIC support for MIPI/DSI
   - Per-engine WA init for all engines
   - Shrinker locking fixes
   - Kerneldoc updates
   - Lots of ring improvements and reset fixes
   - Coffeelake GVT Support
   - VFIO GVT EDID Region support
   - runtime PM wakeref tracking
   - ILK->IVB primary plane enable delays
   - userptr mutex locking fixes
   - DSI fixes
   - LVDS/TV cleanups
   - HW readout fixes
   - LUT robustness fixes
   - ICL display and watermark fixes
   - gem mmap race fix

  amdgpu:
   - add scheduled dependencies interface
   - DCC on scanout surfaces
   - vega10/20 BACO support
   - Multiple IH rings on soc15
   - XGMI locking fixes
   - DC i2c/aux cleanups
   - runtime SMU debug interface
   - Kexec improvmeents
   - SR-IOV fixes
   - DC freesync + ABM fixes
   - GDS fixes
   - GPUVM fixes
   - vega20 PCIE DPM switching fixes
   - Context priority handling fixes

  radeon:
   - fix missing break in evergreen parser

  nouveau:
   - SVM support via HMM

  msm:
   - QCOM Compressed modifier support

  exynos:
   - s5pv210 rotator support

  imx:
   - zpos property support
   - pending update fixes

  v3d:
   - cache flush improvments

  vc4:
   - reflection support
   - HDMI overscan support

  tegra:
   - CEC refactoring
   - HDMI audio fixes
   - Tegra186 prep work
   - SOR crossbar device tree fixes

  sun4i:
   - implicit fencing support
   - YUV and scalar support improvements
   - A23 support
   - tiling fixes

  atmel-hlcdc:
   - clipping and rotation property fixes

  qxl:
   - BO and PRIME improvements
   - generic fbdev emulation

  dw-hdmi:
   - HDMI 2.0 2160p
   - YUV420 ouput

  rockchip:
   - implicit fencing support
   - reflection proerties

  virtio-gpu:
   - use generic fbdev emulation

  tilcdc:
   - cpufreq vs crtc init fix

  rcar-du:
   - R8A774C0 support
   - D3/E3 RGB output routing fixes and DPAD0 support
   - RA87744 LVDS support

  bochs:
   - atomic and generic fbdev emulation
   - ID mismatch error on bochs load

  meson:
   - remove firmware fbs"

* tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits)
  drm/amd/display: Use vrr friendly pageflip throttling in DC.
  drm/imx: only send commit done event when all state has been applied
  drm/imx: allow building under COMPILE_TEST
  drm/imx: imx-tve: depend on COMMON_CLK
  drm/imx: ipuv3-plane: add zpos property
  drm/imx: ipuv3-plane: add function to query atomic update status
  gpu: ipu-v3: prg: add function to get channel configure status
  gpu: ipu-v3: pre: add double buffer status readback
  drm/amdgpu: Bump amdgpu version for context priority override.
  drm/amdgpu/powerplay: fix typo in BACO header guards
  drm/amdgpu/powerplay: fix return codes in BACO code
  drm/amdgpu: add missing license on baco files
  drm/bochs: Fix the ID mismatch error
  drm/nouveau/dmem: use dma addresses during migration copies
  drm/nouveau/dmem: use physical vram addresses during migration copies
  drm/nouveau/dmem: extend copy function to allow direct use of physical addresses
  drm/nouveau/svm: new ioctl to migrate process memory to GPU memory
  drm/nouveau/dmem: device memory helpers for SVM
  drm/nouveau/svm: initial support for shared virtual memory
  drm/nouveau: prepare for enabling svm with existing userspace interfaces
  ...

1 files changed, 88 insertions, 15 deletions

diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.c b/drivers/gpu/drm/rcar-du/rcar_lvds.c
index 534a128a869d..7ef97b2a6eda 100644
--- a/drivers/gpu/drm/rcar-du/rcar_lvds.c
+++ b/drivers/gpu/drm/rcar-du/rcar_lvds.c
@@ -10,6 +10,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_graph.h>
@@ -19,9 +20,10 @@
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
-#include <drm/drm_crtc_helper.h>
 #include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
 
+#include "rcar_lvds.h"
 #include "rcar_lvds_regs.h"
 
 struct rcar_lvds;
@@ -182,8 +184,9 @@ struct pll_info {
 
 static void rcar_lvds_d3_e3_pll_calc(struct rcar_lvds *lvds, struct clk *clk,
 				     unsigned long target, struct pll_info *pll,
-				     u32 clksel)
+				     u32 clksel, bool dot_clock_only)
 {
+	unsigned int div7 = dot_clock_only ? 1 : 7;
 	unsigned long output;
 	unsigned long fin;
 	unsigned int m_min;
@@ -217,9 +220,9 @@ static void rcar_lvds_d3_e3_pll_calc(struct rcar_lvds *lvds, struct clk *clk,
 	 *                     `------------> | |
 	 *                                    |/
 	 *
-	 * The /7 divider is optional when the LVDS PLL is used to generate a
-	 * dot clock for the DU RGB output, without using the LVDS encoder. We
-	 * don't support this configuration yet.
+	 * The /7 divider is optional, it is enabled when the LVDS PLL is used
+	 * to drive the LVDS encoder, and disabled when  used to generate a dot
+	 * clock for the DU RGB output, without using the LVDS encoder.
 	 *
 	 * The PLL allowed input frequency range is 12 MHz to 192 MHz.
 	 */
@@ -279,7 +282,7 @@ static void rcar_lvds_d3_e3_pll_calc(struct rcar_lvds *lvds, struct clk *clk,
 				 * the PLL, followed by a an optional fixed /7
 				 * divider.
 				 */
-				fout = fvco / (1 << e) / 7;
+				fout = fvco / (1 << e) / div7;
 				div = DIV_ROUND_CLOSEST(fout, target);
 				diff = abs(fout / div - target);
 
@@ -300,7 +303,7 @@ static void rcar_lvds_d3_e3_pll_calc(struct rcar_lvds *lvds, struct clk *clk,
 
 done:
 	output = fin * pll->pll_n / pll->pll_m / (1 << pll->pll_e)
-	       / 7 / pll->div;
+	       / div7 / pll->div;
 	error = (long)(output - target) * 10000 / (long)target;
 
 	dev_dbg(lvds->dev,
@@ -310,17 +313,18 @@ done:
 		pll->pll_m, pll->pll_n, pll->pll_e, pll->div);
 }
 
-static void rcar_lvds_pll_setup_d3_e3(struct rcar_lvds *lvds, unsigned int freq)
+static void __rcar_lvds_pll_setup_d3_e3(struct rcar_lvds *lvds,
+					unsigned int freq, bool dot_clock_only)
 {
 	struct pll_info pll = { .diff = (unsigned long)-1 };
 	u32 lvdpllcr;
 
 	rcar_lvds_d3_e3_pll_calc(lvds, lvds->clocks.dotclkin[0], freq, &pll,
-				 LVDPLLCR_CKSEL_DU_DOTCLKIN(0));
+				 LVDPLLCR_CKSEL_DU_DOTCLKIN(0), dot_clock_only);
 	rcar_lvds_d3_e3_pll_calc(lvds, lvds->clocks.dotclkin[1], freq, &pll,
-				 LVDPLLCR_CKSEL_DU_DOTCLKIN(1));
+				 LVDPLLCR_CKSEL_DU_DOTCLKIN(1), dot_clock_only);
 	rcar_lvds_d3_e3_pll_calc(lvds, lvds->clocks.extal, freq, &pll,
-				 LVDPLLCR_CKSEL_EXTAL);
+				 LVDPLLCR_CKSEL_EXTAL, dot_clock_only);
 
 	lvdpllcr = LVDPLLCR_PLLON | pll.clksel | LVDPLLCR_CLKOUT
 		 | LVDPLLCR_PLLN(pll.pll_n - 1) | LVDPLLCR_PLLM(pll.pll_m - 1);
@@ -329,6 +333,9 @@ static void rcar_lvds_pll_setup_d3_e3(struct rcar_lvds *lvds, unsigned int freq)
 		lvdpllcr |= LVDPLLCR_STP_CLKOUTE | LVDPLLCR_OUTCLKSEL
 			 |  LVDPLLCR_PLLE(pll.pll_e - 1);
 
+	if (dot_clock_only)
+		lvdpllcr |= LVDPLLCR_OCKSEL;
+
 	rcar_lvds_write(lvds, LVDPLLCR, lvdpllcr);
 
 	if (pll.div > 1)
@@ -342,6 +349,57 @@ static void rcar_lvds_pll_setup_d3_e3(struct rcar_lvds *lvds, unsigned int freq)
 		rcar_lvds_write(lvds, LVDDIV, 0);
 }
 
+static void rcar_lvds_pll_setup_d3_e3(struct rcar_lvds *lvds, unsigned int freq)
+{
+	__rcar_lvds_pll_setup_d3_e3(lvds, freq, false);
+}
+
+/* -----------------------------------------------------------------------------
+ * Clock - D3/E3 only
+ */
+
+int rcar_lvds_clk_enable(struct drm_bridge *bridge, unsigned long freq)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+	int ret;
+
+	if (WARN_ON(!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)))
+		return -ENODEV;
+
+	dev_dbg(lvds->dev, "enabling LVDS PLL, freq=%luHz\n", freq);
+
+	WARN_ON(lvds->enabled);
+
+	ret = clk_prepare_enable(lvds->clocks.mod);
+	if (ret < 0)
+		return ret;
+
+	__rcar_lvds_pll_setup_d3_e3(lvds, freq, true);
+
+	lvds->enabled = true;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rcar_lvds_clk_enable);
+
+void rcar_lvds_clk_disable(struct drm_bridge *bridge)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+
+	if (WARN_ON(!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)))
+		return;
+
+	dev_dbg(lvds->dev, "disabling LVDS PLL\n");
+
+	WARN_ON(!lvds->enabled);
+
+	rcar_lvds_write(lvds, LVDPLLCR, 0);
+
+	clk_disable_unprepare(lvds->clocks.mod);
+
+	lvds->enabled = false;
+}
+EXPORT_SYMBOL_GPL(rcar_lvds_clk_disable);
+
 /* -----------------------------------------------------------------------------
  * Bridge
  */
@@ -520,8 +578,8 @@ static void rcar_lvds_get_lvds_mode(struct rcar_lvds *lvds)
 }
 
 static void rcar_lvds_mode_set(struct drm_bridge *bridge,
-			       struct drm_display_mode *mode,
-			       struct drm_display_mode *adjusted_mode)
+			       const struct drm_display_mode *mode,
+			       const struct drm_display_mode *adjusted_mode)
 {
 	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
 
@@ -544,7 +602,10 @@ static int rcar_lvds_attach(struct drm_bridge *bridge)
 		return drm_bridge_attach(bridge->encoder, lvds->next_bridge,
 					 bridge);
 
-	/* Otherwise we have a panel, create a connector. */
+	/* Otherwise if we have a panel, create a connector. */
+	if (!lvds->panel)
+		return 0;
+
 	ret = drm_connector_init(bridge->dev, connector, &rcar_lvds_conn_funcs,
 				 DRM_MODE_CONNECTOR_LVDS);
 	if (ret < 0)
@@ -592,7 +653,8 @@ static int rcar_lvds_parse_dt(struct rcar_lvds *lvds)
 	local_output = of_graph_get_endpoint_by_regs(lvds->dev->of_node, 1, 0);
 	if (!local_output) {
 		dev_dbg(lvds->dev, "unconnected port@1\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto done;
 	}
 
 	/*
@@ -642,6 +704,15 @@ done:
 	of_node_put(remote_input);
 	of_node_put(remote);
 
+	/*
+	 * On D3/E3 the LVDS encoder provides a clock to the DU, which can be
+	 * used for the DPAD output even when the LVDS output is not connected.
+	 * Don't fail probe in that case as the DU will need the bridge to
+	 * control the clock.
+	 */
+	if (lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)
+		return ret == -ENODEV ? 0 : ret;
+
 	return ret;
 }
 
@@ -785,6 +856,8 @@ static const struct rcar_lvds_device_info rcar_lvds_r8a77995_info = {
 
 static const struct of_device_id rcar_lvds_of_table[] = {
 	{ .compatible = "renesas,r8a7743-lvds", .data = &rcar_lvds_gen2_info },
+	{ .compatible = "renesas,r8a7744-lvds", .data = &rcar_lvds_gen2_info },
+	{ .compatible = "renesas,r8a774c0-lvds", .data = &rcar_lvds_r8a77990_info },
 	{ .compatible = "renesas,r8a7790-lvds", .data = &rcar_lvds_r8a7790_info },
 	{ .compatible = "renesas,r8a7791-lvds", .data = &rcar_lvds_gen2_info },
 	{ .compatible = "renesas,r8a7793-lvds", .data = &rcar_lvds_gen2_info },