Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Some highlights from this development cycle:

   1) Big refactoring of ipv6 route and neigh handling to support
      nexthop objects configurable as units from userspace. From David
      Ahern.

   2) Convert explored_states in BPF verifier into a hash table,
      significantly decreased state held for programs with bpf2bpf
      calls, from Alexei Starovoitov.

   3) Implement bpf_send_signal() helper, from Yonghong Song.

   4) Various classifier enhancements to mvpp2 driver, from Maxime
      Chevallier.

   5) Add aRFS support to hns3 driver, from Jian Shen.

   6) Fix use after free in inet frags by allocating fqdirs dynamically
      and reworking how rhashtable dismantle occurs, from Eric Dumazet.

   7) Add act_ctinfo packet classifier action, from Kevin
      Darbyshire-Bryant.

   8) Add TFO key backup infrastructure, from Jason Baron.

   9) Remove several old and unused ISDN drivers, from Arnd Bergmann.

  10) Add devlink notifications for flash update status to mlxsw driver,
      from Jiri Pirko.

  11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.

  12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.

  13) Various enhancements to ipv6 flow label handling, from Eric
      Dumazet and Willem de Bruijn.

  14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
      der Merwe, and others.

  15) Various improvements to axienet driver including converting it to
      phylink, from Robert Hancock.

  16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.

  17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
      Radulescu.

  18) Add devlink health reporting to mlx5, from Moshe Shemesh.

  19) Convert stmmac over to phylink, from Jose Abreu.

  20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
      Shalom Toledo.

  21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.

  22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.

  23) Track spill/fill of constants in BPF verifier, from Alexei
      Starovoitov.

  24) Support bounded loops in BPF, from Alexei Starovoitov.

  25) Various page_pool API fixes and improvements, from Jesper Dangaard
      Brouer.

  26) Just like ipv4, support ref-countless ipv6 route handling. From
      Wei Wang.

  27) Support VLAN offloading in aquantia driver, from Igor Russkikh.

  28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.

  29) Add flower GRE encap/decap support to nfp driver, from Pieter
      Jansen van Vuuren.

  30) Protect against stack overflow when using act_mirred, from John
      Hurley.

  31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.

  32) Use page_pool API in netsec driver, Ilias Apalodimas.

  33) Add Google gve network driver, from Catherine Sullivan.

  34) More indirect call avoidance, from Paolo Abeni.

  35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.

  36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.

  37) Add MPLS manipulation actions to TC, from John Hurley.

  38) Add sending a packet to connection tracking from TC actions, and
      then allow flower classifier matching on conntrack state. From
      Paul Blakey.

  39) Netfilter hw offload support, from Pablo Neira Ayuso"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
  net/mlx5e: Return in default case statement in tx_post_resync_params
  mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
  net: dsa: add support for BRIDGE_MROUTER attribute
  pkt_sched: Include const.h
  net: netsec: remove static declaration for netsec_set_tx_de()
  net: netsec: remove superfluous if statement
  netfilter: nf_tables: add hardware offload support
  net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
  net: flow_offload: add flow_block_cb_is_busy() and use it
  net: sched: remove tcf block API
  drivers: net: use flow block API
  net: sched: use flow block API
  net: flow_offload: add flow_block_cb_{priv, incref, decref}()
  net: flow_offload: add list handling functions
  net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
  net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
  net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
  net: flow_offload: add flow_block_cb_setup_simple()
  net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
  net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
  ...

1 files changed, 0 insertions, 423 deletions

diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
deleted file mode 100644
index 43d98ccf5ff6..000000000000
--- a/drivers/isdn/hisax/Kconfig
+++ /dev/null
@@ -1,423 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-menu "Passive cards"
-
-config ISDN_DRV_HISAX
-	tristate "HiSax SiemensChipSet driver support"
-	select CRC_CCITT
-	---help---
-	  This is a driver supporting the Siemens chipset on various
-	  ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles
-	  S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many
-	  compatibles).
-
-	  HiSax is just the name of this driver, not the name of any hardware.
-
-	  If you have a card with such a chipset, you should say Y here and
-	  also to the configuration option of the driver for your particular
-	  card, below.
-
-if ISDN_DRV_HISAX
-
-comment "D-channel protocol features"
-
-config HISAX_EURO
-	bool "HiSax Support for EURO/DSS1"
-	help
-	  Say Y or N according to the D-channel protocol which your local
-	  telephone service company provides.
-
-	  The call control protocol E-DSS1 is used in most European countries.
-	  If unsure, say Y.
-
-config DE_AOC
-	bool "Support for german chargeinfo"
-	depends on HISAX_EURO
-	help
-	  If you want that the HiSax hardware driver sends messages to the
-	  upper level of the isdn code on each AOCD (Advice Of Charge, During
-	  the call -- transmission of the fee information during a call) and
-	  on each AOCE (Advice Of Charge, at the End of the call --
-	  transmission of fee information at the end of the call), say Y here.
-	  This works only in Germany.
-
-config HISAX_NO_SENDCOMPLETE
-	bool "Disable sending complete"
-	depends on HISAX_EURO
-	help
-	  If you have trouble with some ugly exchanges or you live in
-	  Australia select this option.
-
-config HISAX_NO_LLC
-	bool "Disable sending low layer compatibility"
-	depends on HISAX_EURO
-	help
-	  If you have trouble with some ugly exchanges try to select this
-	  option.
-
-config HISAX_NO_KEYPAD
-	bool "Disable keypad protocol option"
-	depends on HISAX_EURO
-	help
-	  If you like to send special dial strings including * or # without
-	  using the keypad protocol, select this option.
-
-config HISAX_1TR6
-	bool "HiSax Support for german 1TR6"
-	help
-	  Say Y or N according to the D-channel protocol which your local
-	  telephone service company provides.
-
-	  1TR6 is an old call control protocol which was used in Germany
-	  before E-DSS1 was established. Nowadays, all new lines in Germany
-	  use E-DSS1.
-
-config HISAX_NI1
-	bool "HiSax Support for US NI1"
-	help
-	  Enable this if you like to use ISDN in US on a NI1 basic rate
-	  interface.
-
-config HISAX_MAX_CARDS
-	int "Maximum number of cards supported by HiSax"
-	default "8"
-	help
-	  This option allows you to specify the maximum number of cards which
-	  the HiSax driver will be able to handle.  
-
-comment "HiSax supported cards"
-
-config HISAX_16_0
-	bool "Teles 16.0/8.0"
-	depends on ISA
-	help
-	  This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8
-	  and many compatibles.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port/shmem settings.
-
-config HISAX_16_3
-	bool "Teles 16.3 or PNP or PCMCIA"
-	help
-	  This enables HiSax support for the Teles ISDN-cards S0-16.3 the
-	  Teles/Creatix PnP and the Teles PCMCIA.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_TELESPCI
-	bool "Teles PCI"
-	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
-	help
-	  This enables HiSax support for the Teles PCI.
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it.
-
-config HISAX_S0BOX
-	bool "Teles S0Box"
-	help
-	  This enables HiSax support for the Teles/Creatix parallel port
-	  S0BOX.  See <file:Documentation/isdn/README.HiSax> on how to
-	  configure it.
-
-config HISAX_AVM_A1
-	bool "AVM A1 (Fritz)"
-	depends on ISA
-	help
-	  This enables HiSax support for the AVM A1 (aka "Fritz").
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_FRITZPCI
-	bool "AVM PnP/PCI (Fritz!PnP/PCI)"
-	depends on BROKEN || !PPC64
-	help
-	  This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it.
-
-config HISAX_AVM_A1_PCMCIA
-	bool "AVM A1 PCMCIA (Fritz)"
-	help
-	  This enables HiSax support for the AVM A1 "Fritz!PCMCIA").
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it.
-
-config HISAX_ELSA
-	bool "Elsa cards"
-	help
-	  This enables HiSax support for the Elsa Mircolink ISA cards, for the
-	  Elsa Quickstep series cards and Elsa PCMCIA.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_IX1MICROR2
-	bool "ITK ix1-micro Revision 2"
-	depends on ISA
-	help
-	  This enables HiSax support for the ITK ix1-micro Revision 2 card.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_DIEHLDIVA
-	bool "Eicon.Diehl Diva cards"
-	help
-	  This enables HiSax support for the Eicon.Diehl Diva none PRO
-	  versions passive ISDN cards.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_ASUSCOM
-	bool "ASUSCOM ISA cards"
-	depends on ISA
-	help
-	  This enables HiSax support for the AsusCom and their OEM versions
-	  passive ISDN ISA cards.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_TELEINT
-	bool "TELEINT cards"
-	depends on ISA
-	help
-	  This enables HiSax support for the TELEINT SA1 semiactiv ISDN card.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_HFCS
-	bool "HFC-S based cards"
-	depends on ISA
-	help
-	  This enables HiSax support for the HFC-S 2BDS0 based cards, like
-	  teles 16.3c.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_SEDLBAUER
-	bool "Sedlbauer cards"
-	help
-	  This enables HiSax support for the Sedlbauer passive ISDN cards.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_SPORTSTER
-	bool "USR Sportster internal TA"
-	depends on ISA
-	help
-	  This enables HiSax support for the USR Sportster internal TA card.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using a different D-channel protocol, or non-standard IRQ/port
-	  settings.
-
-config HISAX_MIC
-	bool "MIC card"
-	depends on ISA
-	help
-	  This enables HiSax support for the ITH MIC card.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using a different D-channel protocol, or non-standard IRQ/port
-	  settings.
-
-config HISAX_NETJET
-	bool "NETjet card"
-	depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
-	depends on VIRT_TO_BUS
-	help
-	  This enables HiSax support for the NetJet from Traverse
-	  Technologies.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using a different D-channel protocol, or non-standard IRQ/port
-	  settings.
-
-config HISAX_NETJET_U
-	bool "NETspider U card"
-	depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
-	depends on VIRT_TO_BUS
-	help
-	  This enables HiSax support for the Netspider U interface ISDN card
-	  from Traverse Technologies.
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using a different D-channel protocol, or non-standard IRQ/port
-	  settings.
-
-config HISAX_NICCY
-	bool "Niccy PnP/PCI card"
-	help
-	  This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using a different D-channel protocol, or non-standard IRQ/port
-	  settings.
-
-config HISAX_ISURF
-	bool "Siemens I-Surf card"
-	depends on ISA
-	help
-	  This enables HiSax support for the Siemens I-Talk/I-Surf card with
-	  ISAR chip.
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using a different D-channel protocol, or non-standard IRQ/port
-	  settings.
-
-config HISAX_HSTSAPHIR
-	bool "HST Saphir card"
-	depends on ISA
-	help
-	  This enables HiSax support for the HST Saphir card.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using a different D-channel protocol, or non-standard IRQ/port
-	  settings.
-
-config HISAX_BKM_A4T
-	bool "Telekom A4T card"
-	depends on PCI
-	help
-	  This enables HiSax support for the Telekom A4T card.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using a different D-channel protocol, or non-standard IRQ/port
-	  settings.
-
-config HISAX_SCT_QUADRO
-	bool "Scitel Quadro card"
-	depends on PCI
-	help
-	  This enables HiSax support for the Scitel Quadro card.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using a different D-channel protocol, or non-standard IRQ/port
-	  settings.
-
-config HISAX_GAZEL
-	bool "Gazel cards"
-	help
-	  This enables HiSax support for the Gazel cards.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using a different D-channel protocol, or non-standard IRQ/port
-	  settings.
-
-config HISAX_HFC_PCI
-	bool "HFC PCI-Bus cards"
-	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
-	help
-	  This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
-
-	  For more information see under
-	  <file:Documentation/isdn/README.hfc-pci>.
-
-config HISAX_W6692
-	bool "Winbond W6692 based cards"
-	depends on PCI
-	help
-	  This enables HiSax support for Winbond W6692 based PCI ISDN cards.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using a different D-channel protocol, or non-standard IRQ/port
-	  settings.
-
-config HISAX_HFC_SX
-	bool "HFC-S+, HFC-SP, HFC-PCMCIA cards"
-	help
-	  This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA
-	  cards. This code is not finished yet.
-
-config HISAX_ENTERNOW_PCI
-	bool "Formula-n enter:now PCI card"
-	depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
-	help
-	  This enables HiSax support for the Formula-n enter:now PCI
-	  ISDN card.
-
-config HISAX_DEBUG
-	bool "HiSax debugging"
-	help
-	  This enables debugging code in the new-style HiSax drivers, i.e.
-	  the ST5481 USB driver currently. 
-	  If in doubt, say yes.
-
-comment "HiSax PCMCIA card service modules"
-
-config HISAX_SEDLBAUER_CS
-	tristate "Sedlbauer PCMCIA cards"
-	depends on PCMCIA && HISAX_SEDLBAUER
-	help
-	  This enables the PCMCIA client driver for the Sedlbauer Speed Star
-	  and Speed Star II cards.
-
-config HISAX_ELSA_CS
-	tristate "ELSA PCMCIA MicroLink cards"
-	depends on PCMCIA && HISAX_ELSA
-	help
-	  This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink
-	  card.
-
-config HISAX_AVM_A1_CS
-	tristate "AVM A1 PCMCIA cards"
-	depends on PCMCIA && ISDN_DRV_HISAX
-	help
-	  This enables the PCMCIA client driver for the AVM A1 / Fritz!Card
-	  PCMCIA cards.
-
-config HISAX_TELES_CS
-	tristate "TELES PCMCIA cards"
-	depends on PCMCIA && HISAX_16_3
-	help
-	  This enables the PCMCIA client driver for the Teles PCMCIA cards.
-
-comment "HiSax sub driver modules"
-
-config HISAX_ST5481
-	tristate "ST5481 USB ISDN modem"
-	depends on USB
-	select ISDN_HDLC
-	select CRC_CCITT
-	select BITREVERSE
-	help
-	  This enables the driver for ST5481 based USB ISDN adapters,
-	  e.g. the BeWan Gazel 128 USB
-
-config HISAX_HFCUSB
-	tristate "HFC USB based ISDN modems"
-	depends on USB
-	help
-	  This enables the driver for HFC USB based ISDN modems.
-
-config HISAX_HFC4S8S
-	tristate "HFC-4S/8S based ISDN cards"
-	help
-	  This enables the driver for HFC-4S/8S based ISDN cards.
-
-config HISAX_FRITZ_PCIPNP
-	tristate "AVM Fritz!Card PCI/PCIv2/PnP support"
-	depends on PCI
-	help
-	  This enables the driver for the AVM Fritz!Card PCI,
-	  Fritz!Card PCI v2 and Fritz!Card PnP.
-	  (the latter also needs you to select "ISA Plug and Play support"
-	  from the menu "Plug and Play configuration")
-
-endif
-
-endmenu
-