V4L/DVB (10805): Add support for NetUP Dual DVB-S2 CI card

Add support for NetUP Dual DVB-S2 CI card
The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips,
STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator.
http://www.linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 53 insertions, 0 deletions

diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 7ff339a2e3f2..08cd793cd151 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -27,6 +27,7 @@
 
 #include "cx23885.h"
 #include "tuner-xc2028.h"
+#include "netup-init.h"
 
 /* ------------------------------------------------------------------ */
 /* board config info                                                  */
@@ -174,6 +175,12 @@ struct cx23885_board cx23885_boards[] = {
 		.name		= "DVBWorld DVB-S2 2005",
 		.portb		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_NETUP_DUAL_DVBS2_CI] = {
+		.cimax		= 1,
+		.name		= "NetUP Dual DVB-S2 CI",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -269,6 +276,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x0001,
 		.subdevice = 0x2005,
 		.card      = CX23885_BOARD_DVBWORLD_2005,
+	}, {
+		.subvendor = 0x1b55,
+		.subdevice = 0x2a2c,
+		.card      = CX23885_BOARD_NETUP_DUAL_DVBS2_CI,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -582,6 +593,32 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		cx_write(MC417_OEN, 0x00001000);
 		cx_write(MC417_RWD, 0x00001800);
 		break;
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+		/* GPIO-0 INTA from CiMax1
+		   GPIO-1 INTB from CiMax2
+		   GPIO-2 reset chips
+		   GPIO-3 to GPIO-10 data/addr for CA
+		   GPIO-11 ~CS0 to CiMax1
+		   GPIO-12 ~CS1 to CiMax2
+		   GPIO-13 ADL0 load LSB addr
+		   GPIO-14 ADL1 load MSB addr
+		   GPIO-15 ~RDY from CiMax
+		   GPIO-17 ~RD to CiMax
+		   GPIO-18 ~WR to CiMax
+		 */
+		cx_set(GP0_IO, 0x00040000); /* GPIO as out */
+		/* GPIO1 and GPIO2 as INTA and INTB from CiMaxes, reset low */
+		cx_clear(GP0_IO, 0x00030004);
+		mdelay(100);/* reset delay */
+		cx_set(GP0_IO, 0x00040004); /* GPIO as out, reset high */
+		cx_write(MC417_CTL, 0x00000037);/* enable GPIO3-18 pins */
+		/* GPIO-15 IN as ~ACK, rest as OUT */
+		cx_write(MC417_OEN, 0x00001000);
+		/* ~RD, ~WR high; ADL0, ADL1 low; ~CS0, ~CS1 high */
+		cx_write(MC417_RWD, 0x0000c300);
+		/* enable irq */
+		cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
+		break;
 	}
 }
 
@@ -669,6 +706,14 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 		break;
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
@@ -693,9 +738,17 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1700:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
 		request_module("cx25840");
 		break;
 	}
+
+	/* AUX-PLL 27MHz CLK */
+	switch (dev->board) {
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+		netup_initialize(dev);
+		break;
+	}
 }
 
 /* ------------------------------------------------------------------ */