diff options
| author | Roger Quadros | 2013-10-15 14:30:34 +0200 |
|---|---|---|
| committer | Lee Jones | 2013-10-23 17:22:25 +0200 |
| commit | b0e5992612a1079ddcc1810b786ab8ca438cddae (patch) | |
| tree | 68f303a71b3dd61f4c2f442f9e541137b6231a13 /drivers/mfd/omap-usb-host.c | |
| parent | mfd: max77686: Include linux/of.h header (diff) | |
| download | kernel-qcow2-linux-b0e5992612a1079ddcc1810b786ab8ca438cddae.tar.gz kernel-qcow2-linux-b0e5992612a1079ddcc1810b786ab8ca438cddae.tar.xz kernel-qcow2-linux-b0e5992612a1079ddcc1810b786ab8ca438cddae.zip | |
mfd: omap-usb: prepare/unprepare clock while enable/disable
This should fix the following warning at boot on OMAP5 uEVM
[ 8.783155] WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:883 __clk_enable+0x94/0xa4()
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'drivers/mfd/omap-usb-host.c')
| -rw-r--r-- | drivers/mfd/omap-usb-host.c | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 1b65ffe08ff9..142650fdc058 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -328,13 +328,13 @@ static int usbhs_runtime_resume(struct device *dev) omap_tll_enable(pdata); if (!IS_ERR(omap->ehci_logic_fck)) - clk_enable(omap->ehci_logic_fck); + clk_prepare_enable(omap->ehci_logic_fck); for (i = 0; i < omap->nports; i++) { switch (pdata->port_mode[i]) { case OMAP_EHCI_PORT_MODE_HSIC: if (!IS_ERR(omap->hsic60m_clk[i])) { - r = clk_enable(omap->hsic60m_clk[i]); + r = clk_prepare_enable(omap->hsic60m_clk[i]); if (r) { dev_err(dev, "Can't enable port %d hsic60m clk:%d\n", @@ -343,7 +343,7 @@ static int usbhs_runtime_resume(struct device *dev) } if (!IS_ERR(omap->hsic480m_clk[i])) { - r = clk_enable(omap->hsic480m_clk[i]); + r = clk_prepare_enable(omap->hsic480m_clk[i]); if (r) { dev_err(dev, "Can't enable port %d hsic480m clk:%d\n", @@ -354,7 +354,7 @@ static int usbhs_runtime_resume(struct device *dev) case OMAP_EHCI_PORT_MODE_TLL: if (!IS_ERR(omap->utmi_clk[i])) { - r = clk_enable(omap->utmi_clk[i]); + r = clk_prepare_enable(omap->utmi_clk[i]); if (r) { dev_err(dev, "Can't enable port %d clk : %d\n", @@ -382,15 +382,15 @@ static int usbhs_runtime_suspend(struct device *dev) switch (pdata->port_mode[i]) { case OMAP_EHCI_PORT_MODE_HSIC: if (!IS_ERR(omap->hsic60m_clk[i])) - clk_disable(omap->hsic60m_clk[i]); + clk_disable_unprepare(omap->hsic60m_clk[i]); if (!IS_ERR(omap->hsic480m_clk[i])) - clk_disable(omap->hsic480m_clk[i]); + clk_disable_unprepare(omap->hsic480m_clk[i]); /* Fall through as utmi_clks were used in HSIC mode */ case OMAP_EHCI_PORT_MODE_TLL: if (!IS_ERR(omap->utmi_clk[i])) - clk_disable(omap->utmi_clk[i]); + clk_disable_unprepare(omap->utmi_clk[i]); break; default: break; @@ -398,7 +398,7 @@ static int usbhs_runtime_suspend(struct device *dev) } if (!IS_ERR(omap->ehci_logic_fck)) - clk_disable(omap->ehci_logic_fck); + clk_disable_unprepare(omap->ehci_logic_fck); omap_tll_disable(pdata); |