bnx2x: Allocate VF database in PF when VFs are present

When A PF determines that it may have to manage SRIOV VFs it
allocates a database for this purpose. The database is intended to
keep track of the VF state, the resources allocated for each VF
(queues, interrupt vectors, etc), the state of the VF's queues.
When the VF loads the database is updated accordingly.
When A VF closes the database is consulted to determine which
resources need to be released (close queues against device, reclaim
interrupt vectors, etc).

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 304 insertions, 0 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
new file mode 100644
index 000000000000..f92bf8b738fb
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -0,0 +1,304 @@
+/* bnx2x_sriov.c: Broadcom Everest network driver.
+ *
+ * Copyright 2009-2012 Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available
+ * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a
+ * license other than the GPL, without Broadcom's express prior written
+ * consent.
+ *
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Shmulik Ravid <shmulikr@broadcom.com>
+ *	       Ariel Elior <ariele@broadcom.com>
+ *
+ */
+#include "bnx2x.h"
+#include "bnx2x_init.h"
+#include "bnx2x_sriov.h"
+int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid)
+{
+	int idx;
+
+	for_each_vf(bp, idx)
+		if (bnx2x_vf(bp, idx, abs_vfid) == abs_vfid)
+			break;
+	return idx;
+}
+
+static
+struct bnx2x_virtf *bnx2x_vf_by_abs_fid(struct bnx2x *bp, u16 abs_vfid)
+{
+	u16 idx =  (u16)bnx2x_vf_idx_by_abs_fid(bp, abs_vfid);
+	return (idx < BNX2X_NR_VIRTFN(bp)) ? BP_VF(bp, idx) : NULL;
+}
+
+static int bnx2x_ari_enabled(struct pci_dev *dev)
+{
+	return dev->bus->self && dev->bus->self->ari_enabled;
+}
+
+static void
+bnx2x_vf_set_igu_info(struct bnx2x *bp, u8 igu_sb_id, u8 abs_vfid)
+{
+	struct bnx2x_virtf *vf = bnx2x_vf_by_abs_fid(bp, abs_vfid);
+	if (vf) {
+		if (!vf_sb_count(vf))
+			vf->igu_base_id = igu_sb_id;
+		++vf_sb_count(vf);
+	}
+}
+
+static void
+bnx2x_get_vf_igu_cam_info(struct bnx2x *bp)
+{
+	int sb_id;
+	u32 val;
+	u8 fid;
+
+	/* IGU in normal mode - read CAM */
+	for (sb_id = 0; sb_id < IGU_REG_MAPPING_MEMORY_SIZE; sb_id++) {
+		val = REG_RD(bp, IGU_REG_MAPPING_MEMORY + sb_id * 4);
+		if (!(val & IGU_REG_MAPPING_MEMORY_VALID))
+			continue;
+		fid = GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID);
+		if (!(fid & IGU_FID_ENCODE_IS_PF))
+			bnx2x_vf_set_igu_info(bp, sb_id,
+					      (fid & IGU_FID_VF_NUM_MASK));
+
+		DP(BNX2X_MSG_IOV, "%s[%d], igu_sb_id=%d, msix=%d\n",
+		   ((fid & IGU_FID_ENCODE_IS_PF) ? "PF" : "VF"),
+		   ((fid & IGU_FID_ENCODE_IS_PF) ? (fid & IGU_FID_PF_NUM_MASK) :
+		   (fid & IGU_FID_VF_NUM_MASK)), sb_id,
+		   GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR));
+	}
+}
+
+static void __bnx2x_iov_free_vfdb(struct bnx2x *bp)
+{
+	if (bp->vfdb) {
+		kfree(bp->vfdb->vfqs);
+		kfree(bp->vfdb->vfs);
+		kfree(bp->vfdb);
+	}
+	bp->vfdb = NULL;
+}
+
+static int bnx2x_sriov_pci_cfg_info(struct bnx2x *bp, struct bnx2x_sriov *iov)
+{
+	int pos;
+	struct pci_dev *dev = bp->pdev;
+
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV);
+	if (!pos) {
+		BNX2X_ERR("failed to find SRIOV capability in device\n");
+		return -ENODEV;
+	}
+
+	iov->pos = pos;
+	DP(BNX2X_MSG_IOV, "sriov ext pos %d\n", pos);
+	pci_read_config_word(dev, pos + PCI_SRIOV_CTRL, &iov->ctrl);
+	pci_read_config_word(dev, pos + PCI_SRIOV_TOTAL_VF, &iov->total);
+	pci_read_config_word(dev, pos + PCI_SRIOV_INITIAL_VF, &iov->initial);
+	pci_read_config_word(dev, pos + PCI_SRIOV_VF_OFFSET, &iov->offset);
+	pci_read_config_word(dev, pos + PCI_SRIOV_VF_STRIDE, &iov->stride);
+	pci_read_config_dword(dev, pos + PCI_SRIOV_SUP_PGSIZE, &iov->pgsz);
+	pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap);
+	pci_read_config_byte(dev, pos + PCI_SRIOV_FUNC_LINK, &iov->link);
+
+	return 0;
+}
+
+static int bnx2x_sriov_info(struct bnx2x *bp, struct bnx2x_sriov *iov)
+{
+	u32 val;
+
+	/* read the SRIOV capability structure
+	 * The fields can be read via configuration read or
+	 * directly from the device (starting at offset PCICFG_OFFSET)
+	 */
+	if (bnx2x_sriov_pci_cfg_info(bp, iov))
+		return -ENODEV;
+
+	/* get the number of SRIOV bars */
+	iov->nres = 0;
+
+	/* read the first_vfid */
+	val = REG_RD(bp, PCICFG_OFFSET + GRC_CONFIG_REG_PF_INIT_VF);
+	iov->first_vf_in_pf = ((val & GRC_CR_PF_INIT_VF_PF_FIRST_VF_NUM_MASK)
+			       * 8) - (BNX2X_MAX_NUM_OF_VFS * BP_PATH(bp));
+
+	DP(BNX2X_MSG_IOV,
+	   "IOV info[%d]: first vf %d, nres %d, cap 0x%x, ctrl 0x%x, total %d, initial %d, num vfs %d, offset %d, stride %d, page size 0x%x\n",
+	   BP_FUNC(bp),
+	   iov->first_vf_in_pf, iov->nres, iov->cap, iov->ctrl, iov->total,
+	   iov->initial, iov->nr_virtfn, iov->offset, iov->stride, iov->pgsz);
+
+	return 0;
+}
+
+static u8 bnx2x_iov_get_max_queue_count(struct bnx2x *bp)
+{
+	int i;
+	u8 queue_count = 0;
+
+	if (IS_SRIOV(bp))
+		for_each_vf(bp, i)
+			queue_count += bnx2x_vf(bp, i, alloc_resc.num_sbs);
+
+	return queue_count;
+}
+
+/* must be called after PF bars are mapped */
+int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param,
+				 int num_vfs_param)
+{
+	int err, i, qcount;
+	struct bnx2x_sriov *iov;
+	struct pci_dev *dev = bp->pdev;
+
+	bp->vfdb = NULL;
+
+	/* verify sriov capability is present in configuration space */
+	if (!pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV)) {
+		DP(BNX2X_MSG_IOV, "no sriov - capability not found\n");
+		return 0;
+	}
+
+	/* verify is pf */
+	if (IS_VF(bp))
+		return 0;
+
+	/* verify chip revision */
+	if (CHIP_IS_E1x(bp))
+		return 0;
+
+	/* check if SRIOV support is turned off */
+	if (!num_vfs_param)
+		return 0;
+
+	/* SRIOV assumes that num of PF CIDs < BNX2X_FIRST_VF_CID */
+	if (BNX2X_L2_MAX_CID(bp) >= BNX2X_FIRST_VF_CID) {
+		BNX2X_ERR("PF cids %d are overspilling into vf space (starts at %d). Abort SRIOV\n",
+			  BNX2X_L2_MAX_CID(bp), BNX2X_FIRST_VF_CID);
+		return 0;
+	}
+
+	/* SRIOV can be enabled only with MSIX */
+	if (int_mode_param == BNX2X_INT_MODE_MSI ||
+	    int_mode_param == BNX2X_INT_MODE_INTX) {
+		BNX2X_ERR("Forced MSI/INTx mode is incompatible with SRIOV\n");
+		return 0;
+	}
+
+	/* verify ari is enabled */
+	if (!bnx2x_ari_enabled(bp->pdev)) {
+		BNX2X_ERR("ARI not supported, SRIOV can not be enabled\n");
+		return 0;
+	}
+
+	/* verify igu is in normal mode */
+	if (CHIP_INT_MODE_IS_BC(bp)) {
+		BNX2X_ERR("IGU not normal mode,  SRIOV can not be enabled\n");
+		return 0;
+	}
+
+	/* allocate the vfs database */
+	bp->vfdb = kzalloc(sizeof(*(bp->vfdb)), GFP_KERNEL);
+	if (!bp->vfdb) {
+		BNX2X_ERR("failed to allocate vf database\n");
+		err = -ENOMEM;
+		goto failed;
+	}
+
+	/* get the sriov info - Linux already collected all the pertinent
+	 * information, however the sriov structure is for the private use
+	 * of the pci module. Also we want this information regardless
+	 * of the hyper-visor.
+	 */
+	iov = &(bp->vfdb->sriov);
+	err = bnx2x_sriov_info(bp, iov);
+	if (err)
+		goto failed;
+
+	/* SR-IOV capability was enabled but there are no VFs*/
+	if (iov->total == 0)
+		goto failed;
+
+	/* calcuate the actual number of VFs */
+	iov->nr_virtfn = min_t(u16, iov->total, (u16)num_vfs_param);
+
+	/* allcate the vf array */
+	bp->vfdb->vfs = kzalloc(sizeof(struct bnx2x_virtf) *
+				BNX2X_NR_VIRTFN(bp), GFP_KERNEL);
+	if (!bp->vfdb->vfs) {
+		BNX2X_ERR("failed to allocate vf array\n");
+		err = -ENOMEM;
+		goto failed;
+	}
+
+	/* Initial VF init - index and abs_vfid - nr_virtfn must be set */
+	for_each_vf(bp, i) {
+		bnx2x_vf(bp, i, index) = i;
+		bnx2x_vf(bp, i, abs_vfid) = iov->first_vf_in_pf + i;
+		bnx2x_vf(bp, i, state) = VF_FREE;
+		INIT_LIST_HEAD(&bnx2x_vf(bp, i, op_list_head));
+		mutex_init(&bnx2x_vf(bp, i, op_mutex));
+		bnx2x_vf(bp, i, op_current) = CHANNEL_TLV_NONE;
+	}
+
+	/* re-read the IGU CAM for VFs - index and abs_vfid must be set */
+	bnx2x_get_vf_igu_cam_info(bp);
+
+	/* get the total queue count and allocate the global queue arrays */
+	qcount = bnx2x_iov_get_max_queue_count(bp);
+
+	/* allocate the queue arrays for all VFs */
+	bp->vfdb->vfqs = kzalloc(qcount * sizeof(struct bnx2x_vf_queue),
+				 GFP_KERNEL);
+	if (!bp->vfdb->vfqs) {
+		BNX2X_ERR("failed to allocate vf queue array\n");
+		err = -ENOMEM;
+		goto failed;
+	}
+
+	return 0;
+failed:
+	DP(BNX2X_MSG_IOV, "Failed err=%d\n", err);
+	__bnx2x_iov_free_vfdb(bp);
+	return err;
+}
+
+/* called by bnx2x_init_hw_func, returns the next ilt line */
+int bnx2x_iov_init_ilt(struct bnx2x *bp, u16 line)
+{
+	int i;
+	struct bnx2x_ilt *ilt = BP_ILT(bp);
+
+	if (!IS_SRIOV(bp))
+		return line;
+
+	/* set vfs ilt lines */
+	for (i = 0; i < BNX2X_VF_CIDS/ILT_PAGE_CIDS; i++) {
+		struct hw_dma *hw_cxt = BP_VF_CXT_PAGE(bp, i);
+
+		ilt->lines[line+i].page = hw_cxt->addr;
+		ilt->lines[line+i].page_mapping = hw_cxt->mapping;
+		ilt->lines[line+i].size = hw_cxt->size; /* doesn't matter */
+	}
+	return line + i;
+}
+
+void bnx2x_iov_remove_one(struct bnx2x *bp)
+{
+	/* if SRIOV is not enabled there's nothing to do */
+	if (!IS_SRIOV(bp))
+		return;
+
+	/* free vf database */
+	__bnx2x_iov_free_vfdb(bp);
+}