diff options
| author | Ondrej Zary | 2015-11-15 22:36:11 +0100 |
|---|---|---|
| committer | David S. Miller | 2015-11-16 23:11:31 +0100 |
| commit | c3f45d322cbd379c46466cc2ecab7e2d719b22ed (patch) | |
| tree | f8bbc735fb79fbc7306dd4e96098c834aea58c9a /drivers/net/ethernet/dlink/Kconfig | |
| parent | snmp: Remove duplicate OUTMCAST stat increment (diff) | |
| download | kernel-qcow2-linux-c3f45d322cbd379c46466cc2ecab7e2d719b22ed.tar.gz kernel-qcow2-linux-c3f45d322cbd379c46466cc2ecab7e2d719b22ed.tar.xz kernel-qcow2-linux-c3f45d322cbd379c46466cc2ecab7e2d719b22ed.zip | |
dl2k: Add support for IP1000A-based cards
Add support for IP1000A chips to dl2k driver.
IP1000A chip looks like a TC9020 with integrated PHY.
This allows IP1000A chips to work reliably because the ipg driver is
buggy - it loses packets under load and then completely stops
transmitting data.
Tested with Asus NX1101 v2.0 at 10, 100 and 1000Mbps:
vendor=0x13f0 device=0x1023 (rev 0x41)
subsystem vendor=0x1043 device=0x8180
MAC address registers access needed to be changed from 8-bit to 16-bit
because 8-bit does not work on IP1000A. 8-bit access is not even
allowed in the TC9020 datasheet (although it worked). 16-bit access
works on both.
Tested that it does not break D-Link DGE-550T (DL-2000 chip, probably
a rebranded TC9020):
vendor=0x1186 device=0x4000 (rev 0x0c)
subsystem vendor=0x1186 device=0x4000
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/dlink/Kconfig')
| -rw-r--r-- | drivers/net/ethernet/dlink/Kconfig | 5 |
1 files changed, 3 insertions, 2 deletions
diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig index f6e858d0b9d4..ebdc83247bb6 100644 --- a/drivers/net/ethernet/dlink/Kconfig +++ b/drivers/net/ethernet/dlink/Kconfig @@ -17,15 +17,16 @@ config NET_VENDOR_DLINK if NET_VENDOR_DLINK config DL2K - tristate "DL2000/TC902x-based Gigabit Ethernet support" + tristate "DL2000/TC902x/IP1000A-based Gigabit Ethernet support" depends on PCI select CRC32 ---help--- - This driver supports DL2000/TC902x-based Gigabit ethernet cards, + This driver supports DL2000/TC902x/IP1000A-based Gigabit ethernet cards, which includes D-Link DGE-550T Gigabit Ethernet Adapter. D-Link DL2000-based Gigabit Ethernet Adapter. Sundance/Tamarack TC902x Gigabit Ethernet Adapter. + ICPlus IP1000A-based cards To compile this driver as a module, choose M here: the module will be called dl2k. |