igb: Add new feature Media Auto Sense for 82580 devices only

This patch adds support for the hardware feature Media Auto Sense.  This
feature requires a custom EEPROM image provided by our customer support
team.  The feature allows hardware designed with dual PHY's, fiber and
copper to be used with either media without additional EEPROM changes.
Fiber is preferred and driver will swap and configure for fiber media if
sensed by the device at any time. Device will swap back to copper if it
is the only media detected.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 193 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index ed129f1c5c3e..3bc10bd5bbc1 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1607,6 +1607,73 @@ static void igb_power_down_link(struct igb_adapter *adapter)
 }
 
 /**
+ * Detect and switch function for Media Auto Sense
+ * @adapter: address of the board private structure
+ **/
+static void igb_check_swap_media(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl_ext, connsw;
+	bool swap_now = false;
+
+	ctrl_ext = rd32(E1000_CTRL_EXT);
+	connsw = rd32(E1000_CONNSW);
+
+	/* need to live swap if current media is copper and we have fiber/serdes
+	 * to go to.
+	 */
+
+	if ((hw->phy.media_type == e1000_media_type_copper) &&
+	    (!(connsw & E1000_CONNSW_AUTOSENSE_EN))) {
+		swap_now = true;
+	} else if (!(connsw & E1000_CONNSW_SERDESD)) {
+		/* copper signal takes time to appear */
+		if (adapter->copper_tries < 4) {
+			adapter->copper_tries++;
+			connsw |= E1000_CONNSW_AUTOSENSE_CONF;
+			wr32(E1000_CONNSW, connsw);
+			return;
+		} else {
+			adapter->copper_tries = 0;
+			if ((connsw & E1000_CONNSW_PHYSD) &&
+			    (!(connsw & E1000_CONNSW_PHY_PDN))) {
+				swap_now = true;
+				connsw &= ~E1000_CONNSW_AUTOSENSE_CONF;
+				wr32(E1000_CONNSW, connsw);
+			}
+		}
+	}
+
+	if (!swap_now)
+		return;
+
+	switch (hw->phy.media_type) {
+	case e1000_media_type_copper:
+		netdev_info(adapter->netdev,
+			"MAS: changing media to fiber/serdes\n");
+		ctrl_ext |=
+			E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
+		adapter->flags |= IGB_FLAG_MEDIA_RESET;
+		adapter->copper_tries = 0;
+		break;
+	case e1000_media_type_internal_serdes:
+	case e1000_media_type_fiber:
+		netdev_info(adapter->netdev,
+			"MAS: changing media to copper\n");
+		ctrl_ext &=
+			~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
+		adapter->flags |= IGB_FLAG_MEDIA_RESET;
+		break;
+	default:
+		/* shouldn't get here during regular operation */
+		netdev_err(adapter->netdev,
+			"AMS: Invalid media type found, returning\n");
+		break;
+	}
+	wr32(E1000_CTRL_EXT, ctrl_ext);
+}
+
+/**
  *  igb_up - Open the interface and prepare it to handle traffic
  *  @adapter: board private structure
  **/
@@ -1719,6 +1786,37 @@ void igb_reinit_locked(struct igb_adapter *adapter)
 	clear_bit(__IGB_RESETTING, &adapter->state);
 }
 
+/** igb_enable_mas - Media Autosense re-enable after swap
+ *
+ * @adapter: adapter struct
+ **/
+static s32 igb_enable_mas(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 connsw;
+	s32 ret_val = 0;
+
+	connsw = rd32(E1000_CONNSW);
+	if (!(hw->phy.media_type == e1000_media_type_copper))
+		return ret_val;
+
+	/* configure for SerDes media detect */
+	if (!(connsw & E1000_CONNSW_SERDESD)) {
+		connsw |= E1000_CONNSW_ENRGSRC;
+		connsw |= E1000_CONNSW_AUTOSENSE_EN;
+		wr32(E1000_CONNSW, connsw);
+		wrfl();
+	} else if (connsw & E1000_CONNSW_SERDESD) {
+		/* already SerDes, no need to enable anything */
+		return ret_val;
+	} else {
+		netdev_info(adapter->netdev,
+			"MAS: Unable to configure feature, disabling..\n");
+		adapter->flags &= ~IGB_FLAG_MAS_ENABLE;
+	}
+	return ret_val;
+}
+
 void igb_reset(struct igb_adapter *adapter)
 {
 	struct pci_dev *pdev = adapter->pdev;
@@ -1830,6 +1928,16 @@ void igb_reset(struct igb_adapter *adapter)
 	hw->mac.ops.reset_hw(hw);
 	wr32(E1000_WUC, 0);
 
+	if (adapter->flags & IGB_FLAG_MEDIA_RESET) {
+		/* need to resetup here after media swap */
+		adapter->ei.get_invariants(hw);
+		adapter->flags &= ~IGB_FLAG_MEDIA_RESET;
+	}
+	if (adapter->flags & IGB_FLAG_MAS_ENABLE) {
+		if (igb_enable_mas(adapter))
+			dev_err(&pdev->dev,
+				"Error enabling Media Auto Sense\n");
+	}
 	if (hw->mac.ops.init_hw(hw))
 		dev_err(&pdev->dev, "Hardware Error\n");
 
@@ -1976,6 +2084,58 @@ void igb_set_fw_version(struct igb_adapter *adapter)
 }
 
 /**
+ * igb_init_mas - init Media Autosense feature if enabled in the NVM
+ *
+ * @adapter: adapter struct
+ **/
+static void igb_init_mas(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u16 eeprom_data;
+
+	hw->nvm.ops.read(hw, NVM_COMPAT, 1, &eeprom_data);
+	switch (hw->bus.func) {
+	case E1000_FUNC_0:
+		if (eeprom_data & IGB_MAS_ENABLE_0) {
+			adapter->flags |= IGB_FLAG_MAS_ENABLE;
+			netdev_info(adapter->netdev,
+				"MAS: Enabling Media Autosense for port %d\n",
+				hw->bus.func);
+		}
+		break;
+	case E1000_FUNC_1:
+		if (eeprom_data & IGB_MAS_ENABLE_1) {
+			adapter->flags |= IGB_FLAG_MAS_ENABLE;
+			netdev_info(adapter->netdev,
+				"MAS: Enabling Media Autosense for port %d\n",
+				hw->bus.func);
+		}
+		break;
+	case E1000_FUNC_2:
+		if (eeprom_data & IGB_MAS_ENABLE_2) {
+			adapter->flags |= IGB_FLAG_MAS_ENABLE;
+			netdev_info(adapter->netdev,
+				"MAS: Enabling Media Autosense for port %d\n",
+				hw->bus.func);
+		}
+		break;
+	case E1000_FUNC_3:
+		if (eeprom_data & IGB_MAS_ENABLE_3) {
+			adapter->flags |= IGB_FLAG_MAS_ENABLE;
+			netdev_info(adapter->netdev,
+				"MAS: Enabling Media Autosense for port %d\n",
+				hw->bus.func);
+		}
+		break;
+	default:
+		/* Shouldn't get here */
+		netdev_err(adapter->netdev,
+			"MAS: Invalid port configuration, returning\n");
+		break;
+	}
+}
+
+/**
  *  igb_init_i2c - Init I2C interface
  *  @adapter: pointer to adapter structure
  **/
@@ -2346,6 +2506,11 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		adapter->ets = false;
 	}
 #endif
+	/* Check if Media Autosense is enabled */
+	adapter->ei = *ei;
+	if (hw->dev_spec._82575.mas_capable)
+		igb_init_mas(adapter);
+
 	/* do hw tstamp init after resetting */
 	igb_ptp_init(adapter);
 
@@ -3931,6 +4096,7 @@ static void igb_watchdog_task(struct work_struct *work)
 	struct net_device *netdev = adapter->netdev;
 	u32 link;
 	int i;
+	u32 connsw;
 
 	link = igb_has_link(adapter);
 
@@ -3941,6 +4107,14 @@ static void igb_watchdog_task(struct work_struct *work)
 			link = false;
 	}
 
+	/* Force link down if we have fiber to swap to */
+	if (adapter->flags & IGB_FLAG_MAS_ENABLE) {
+		if (hw->phy.media_type == e1000_media_type_copper) {
+			connsw = rd32(E1000_CONNSW);
+			if (!(connsw & E1000_CONNSW_AUTOSENSE_EN))
+				link = 0;
+		}
+	}
 	if (link) {
 		/* Perform a reset if the media type changed. */
 		if (hw->dev_spec._82575.media_changed) {
@@ -4028,8 +4202,27 @@ static void igb_watchdog_task(struct work_struct *work)
 				mod_timer(&adapter->phy_info_timer,
 					  round_jiffies(jiffies + 2 * HZ));
 
+			/* link is down, time to check for alternate media */
+			if (adapter->flags & IGB_FLAG_MAS_ENABLE) {
+				igb_check_swap_media(adapter);
+				if (adapter->flags & IGB_FLAG_MEDIA_RESET) {
+					schedule_work(&adapter->reset_task);
+					/* return immediately */
+					return;
+				}
+			}
 			pm_schedule_suspend(netdev->dev.parent,
 					    MSEC_PER_SEC * 5);
+
+		/* also check for alternate media here */
+		} else if (!netif_carrier_ok(netdev) &&
+			   (adapter->flags & IGB_FLAG_MAS_ENABLE)) {
+			igb_check_swap_media(adapter);
+			if (adapter->flags & IGB_FLAG_MEDIA_RESET) {
+				schedule_work(&adapter->reset_task);
+				/* return immediately */
+				return;
+			}
 		}
 	}