ixgbe: add support for quad-port x520 adapter

This is a x520 based quad-port (4x10Gbps) NIC with a single QSFP+
connector.  Changes were required to our identify functions due to
different eeprom address which is also included here.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 177 insertions, 1 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index 71f554a3bcc2..369eef526bc1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -841,9 +841,35 @@ out:
 }
 
 /**
- *  ixgbe_identify_sfp_module_generic - Identifies SFP modules
+ *  ixgbe_identify_module_generic - Identifies module type
  *  @hw: pointer to hardware structure
  *
+ *  Determines HW type and calls appropriate function.
+ **/
+s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_SFP_NOT_PRESENT;
+
+	switch (hw->mac.ops.get_media_type(hw)) {
+	case ixgbe_media_type_fiber:
+		status = ixgbe_identify_sfp_module_generic(hw);
+		break;
+	case ixgbe_media_type_fiber_qsfp:
+		status = ixgbe_identify_qsfp_module_generic(hw);
+		break;
+	default:
+		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+		status = IXGBE_ERR_SFP_NOT_PRESENT;
+		break;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_identify_sfp_module_generic - Identifies SFP modules
+ *  @hw: pointer to hardware structure
+*
  *  Searches for and identifies the SFP module and assigns appropriate PHY type.
  **/
 s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
@@ -1122,6 +1148,156 @@ err_read_i2c_eeprom:
 }
 
 /**
+ * ixgbe_identify_qsfp_module_generic - Identifies QSFP modules
+ * @hw: pointer to hardware structure
+ *
+ * Searches for and identifies the QSFP module and assigns appropriate PHY type
+ **/
+s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_adapter *adapter = hw->back;
+	s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+	u32 vendor_oui = 0;
+	enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
+	u8 identifier = 0;
+	u8 comp_codes_1g = 0;
+	u8 comp_codes_10g = 0;
+	u8 oui_bytes[3] = {0, 0, 0};
+	u16 enforce_sfp = 0;
+
+	if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) {
+		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+		status = IXGBE_ERR_SFP_NOT_PRESENT;
+		goto out;
+	}
+
+	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
+					     &identifier);
+
+	if (status != 0)
+		goto err_read_i2c_eeprom;
+
+	if (identifier != IXGBE_SFF_IDENTIFIER_QSFP_PLUS) {
+		hw->phy.type = ixgbe_phy_sfp_unsupported;
+		status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+		goto out;
+	}
+
+	hw->phy.id = identifier;
+
+	/* LAN ID is needed for sfp_type determination */
+	hw->mac.ops.set_lan_id(hw);
+
+	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_10GBE_COMP,
+					     &comp_codes_10g);
+
+	if (status != 0)
+		goto err_read_i2c_eeprom;
+
+	if (comp_codes_10g & IXGBE_SFF_QSFP_DA_PASSIVE_CABLE) {
+		hw->phy.type = ixgbe_phy_qsfp_passive_unknown;
+		if (hw->bus.lan_id == 0)
+			hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core0;
+		else
+			hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core1;
+	} else if (comp_codes_10g & IXGBE_SFF_QSFP_DA_ACTIVE_CABLE) {
+		hw->phy.type = ixgbe_phy_qsfp_active_unknown;
+		if (hw->bus.lan_id == 0)
+			hw->phy.sfp_type = ixgbe_sfp_type_da_act_lmt_core0;
+		else
+			hw->phy.sfp_type = ixgbe_sfp_type_da_act_lmt_core1;
+	} else if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
+				     IXGBE_SFF_10GBASELR_CAPABLE)) {
+		if (hw->bus.lan_id == 0)
+			hw->phy.sfp_type = ixgbe_sfp_type_srlr_core0;
+		else
+			hw->phy.sfp_type = ixgbe_sfp_type_srlr_core1;
+	} else {
+		/* unsupported module type */
+		hw->phy.type = ixgbe_phy_sfp_unsupported;
+		status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+		goto out;
+	}
+
+	if (hw->phy.sfp_type != stored_sfp_type)
+		hw->phy.sfp_setup_needed = true;
+
+	/* Determine if the QSFP+ PHY is dual speed or not. */
+	hw->phy.multispeed_fiber = false;
+	if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
+	     (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
+	    ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
+	     (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
+		hw->phy.multispeed_fiber = true;
+
+	/* Determine PHY vendor for optical modules */
+	if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
+			      IXGBE_SFF_10GBASELR_CAPABLE)) {
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0,
+					&oui_bytes[0]);
+
+		if (status != 0)
+			goto err_read_i2c_eeprom;
+
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1,
+					&oui_bytes[1]);
+
+		if (status != 0)
+			goto err_read_i2c_eeprom;
+
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2,
+					&oui_bytes[2]);
+
+		if (status != 0)
+			goto err_read_i2c_eeprom;
+
+		vendor_oui =
+			((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
+			 (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
+			 (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
+
+		if (vendor_oui == IXGBE_SFF_VENDOR_OUI_INTEL)
+			hw->phy.type = ixgbe_phy_qsfp_intel;
+		else
+			hw->phy.type = ixgbe_phy_qsfp_unknown;
+
+		hw->mac.ops.get_device_caps(hw, &enforce_sfp);
+		if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) {
+			/* Make sure we're a supported PHY type */
+			if (hw->phy.type == ixgbe_phy_qsfp_intel) {
+				status = 0;
+			} else {
+				if (hw->allow_unsupported_sfp == true) {
+					e_warn(hw, "WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules.\n");
+					status = 0;
+				} else {
+					hw_dbg(hw,
+					       "QSFP module not supported\n");
+					hw->phy.type =
+						ixgbe_phy_sfp_unsupported;
+					status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+				}
+			}
+		} else {
+			status = 0;
+		}
+	}
+
+out:
+	return status;
+
+err_read_i2c_eeprom:
+	hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+	hw->phy.id = 0;
+	hw->phy.type = ixgbe_phy_unknown;
+
+	return IXGBE_ERR_SFP_NOT_PRESENT;
+}
+
+/**
  *  ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence
  *  @hw: pointer to hardware structure
  *  @list_offset: offset to the SFP ID list