Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Some highlights from this development cycle:

   1) Big refactoring of ipv6 route and neigh handling to support
      nexthop objects configurable as units from userspace. From David
      Ahern.

   2) Convert explored_states in BPF verifier into a hash table,
      significantly decreased state held for programs with bpf2bpf
      calls, from Alexei Starovoitov.

   3) Implement bpf_send_signal() helper, from Yonghong Song.

   4) Various classifier enhancements to mvpp2 driver, from Maxime
      Chevallier.

   5) Add aRFS support to hns3 driver, from Jian Shen.

   6) Fix use after free in inet frags by allocating fqdirs dynamically
      and reworking how rhashtable dismantle occurs, from Eric Dumazet.

   7) Add act_ctinfo packet classifier action, from Kevin
      Darbyshire-Bryant.

   8) Add TFO key backup infrastructure, from Jason Baron.

   9) Remove several old and unused ISDN drivers, from Arnd Bergmann.

  10) Add devlink notifications for flash update status to mlxsw driver,
      from Jiri Pirko.

  11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.

  12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.

  13) Various enhancements to ipv6 flow label handling, from Eric
      Dumazet and Willem de Bruijn.

  14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
      der Merwe, and others.

  15) Various improvements to axienet driver including converting it to
      phylink, from Robert Hancock.

  16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.

  17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
      Radulescu.

  18) Add devlink health reporting to mlx5, from Moshe Shemesh.

  19) Convert stmmac over to phylink, from Jose Abreu.

  20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
      Shalom Toledo.

  21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.

  22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.

  23) Track spill/fill of constants in BPF verifier, from Alexei
      Starovoitov.

  24) Support bounded loops in BPF, from Alexei Starovoitov.

  25) Various page_pool API fixes and improvements, from Jesper Dangaard
      Brouer.

  26) Just like ipv4, support ref-countless ipv6 route handling. From
      Wei Wang.

  27) Support VLAN offloading in aquantia driver, from Igor Russkikh.

  28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.

  29) Add flower GRE encap/decap support to nfp driver, from Pieter
      Jansen van Vuuren.

  30) Protect against stack overflow when using act_mirred, from John
      Hurley.

  31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.

  32) Use page_pool API in netsec driver, Ilias Apalodimas.

  33) Add Google gve network driver, from Catherine Sullivan.

  34) More indirect call avoidance, from Paolo Abeni.

  35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.

  36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.

  37) Add MPLS manipulation actions to TC, from John Hurley.

  38) Add sending a packet to connection tracking from TC actions, and
      then allow flower classifier matching on conntrack state. From
      Paul Blakey.

  39) Netfilter hw offload support, from Pablo Neira Ayuso"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
  net/mlx5e: Return in default case statement in tx_post_resync_params
  mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
  net: dsa: add support for BRIDGE_MROUTER attribute
  pkt_sched: Include const.h
  net: netsec: remove static declaration for netsec_set_tx_de()
  net: netsec: remove superfluous if statement
  netfilter: nf_tables: add hardware offload support
  net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
  net: flow_offload: add flow_block_cb_is_busy() and use it
  net: sched: remove tcf block API
  drivers: net: use flow block API
  net: sched: use flow block API
  net: flow_offload: add flow_block_cb_{priv, incref, decref}()
  net: flow_offload: add list handling functions
  net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
  net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
  net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
  net: flow_offload: add flow_block_cb_setup_simple()
  net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
  net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
  ...

1 files changed, 58 insertions, 18 deletions

diff --git a/drivers/net/ethernet/mellanox/mlxsw/i2c.c b/drivers/net/ethernet/mellanox/mlxsw/i2c.c
index 06aea1999518..95f408d0e103 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/i2c.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/i2c.c
@@ -43,11 +43,10 @@
 #define MLXSW_I2C_PREP_SIZE		(MLXSW_I2C_ADDR_WIDTH + 28)
 #define MLXSW_I2C_MBOX_SIZE		20
 #define MLXSW_I2C_MBOX_OUT_PARAM_OFF	12
-#define MLXSW_I2C_MAX_BUFF_SIZE		32
 #define MLXSW_I2C_MBOX_OFFSET_BITS	20
 #define MLXSW_I2C_MBOX_SIZE_BITS	12
 #define MLXSW_I2C_ADDR_BUF_SIZE		4
-#define MLXSW_I2C_BLK_MAX		32
+#define MLXSW_I2C_BLK_DEF		32
 #define MLXSW_I2C_RETRY			5
 #define MLXSW_I2C_TIMEOUT_MSECS		5000
 #define MLXSW_I2C_MAX_DATA_SIZE		256
@@ -62,6 +61,7 @@
  * @dev: I2C device;
  * @core: switch core pointer;
  * @bus_info: bus info block;
+ * @block_size: maximum block size allowed to pass to under layer;
  */
 struct mlxsw_i2c {
 	struct {
@@ -74,6 +74,7 @@ struct mlxsw_i2c {
 	struct device *dev;
 	struct mlxsw_core *core;
 	struct mlxsw_bus_info bus_info;
+	u16 block_size;
 };
 
 #define MLXSW_I2C_READ_MSG(_client, _addr_buf, _buf, _len) {	\
@@ -315,20 +316,26 @@ mlxsw_i2c_write(struct device *dev, size_t in_mbox_size, u8 *in_mbox, int num,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct mlxsw_i2c *mlxsw_i2c = i2c_get_clientdata(client);
 	unsigned long timeout = msecs_to_jiffies(MLXSW_I2C_TIMEOUT_MSECS);
-	u8 tran_buf[MLXSW_I2C_MAX_BUFF_SIZE + MLXSW_I2C_ADDR_BUF_SIZE];
 	int off = mlxsw_i2c->cmd.mb_off_in, chunk_size, i, j;
 	unsigned long end;
+	u8 *tran_buf;
 	struct i2c_msg write_tran =
-		MLXSW_I2C_WRITE_MSG(client, tran_buf, MLXSW_I2C_PUSH_CMD_SIZE);
+		MLXSW_I2C_WRITE_MSG(client, NULL, MLXSW_I2C_PUSH_CMD_SIZE);
 	int err;
 
+	tran_buf = kmalloc(mlxsw_i2c->block_size + MLXSW_I2C_ADDR_BUF_SIZE,
+			   GFP_KERNEL);
+	if (!tran_buf)
+		return -ENOMEM;
+
+	write_tran.buf = tran_buf;
 	for (i = 0; i < num; i++) {
-		chunk_size = (in_mbox_size > MLXSW_I2C_BLK_MAX) ?
-			     MLXSW_I2C_BLK_MAX : in_mbox_size;
+		chunk_size = (in_mbox_size > mlxsw_i2c->block_size) ?
+			     mlxsw_i2c->block_size : in_mbox_size;
 		write_tran.len = MLXSW_I2C_ADDR_WIDTH + chunk_size;
 		mlxsw_i2c_set_slave_addr(tran_buf, off);
 		memcpy(&tran_buf[MLXSW_I2C_ADDR_BUF_SIZE], in_mbox +
-		       MLXSW_I2C_BLK_MAX * i, chunk_size);
+		       mlxsw_i2c->block_size * i, chunk_size);
 
 		j = 0;
 		end = jiffies + timeout;
@@ -342,9 +349,10 @@ mlxsw_i2c_write(struct device *dev, size_t in_mbox_size, u8 *in_mbox, int num,
 			 (j++ < MLXSW_I2C_RETRY));
 
 		if (err != 1) {
-			if (!err)
+			if (!err) {
 				err = -EIO;
-			return err;
+				goto mlxsw_i2c_write_exit;
+			}
 		}
 
 		off += chunk_size;
@@ -355,24 +363,27 @@ mlxsw_i2c_write(struct device *dev, size_t in_mbox_size, u8 *in_mbox, int num,
 	err = mlxsw_i2c_write_cmd(client, mlxsw_i2c, 0);
 	if (err) {
 		dev_err(&client->dev, "Could not start transaction");
-		return -EIO;
+		err = -EIO;
+		goto mlxsw_i2c_write_exit;
 	}
 
 	/* Wait until go bit is cleared. */
 	err = mlxsw_i2c_wait_go_bit(client, mlxsw_i2c, p_status);
 	if (err) {
 		dev_err(&client->dev, "HW semaphore is not released");
-		return err;
+		goto mlxsw_i2c_write_exit;
 	}
 
 	/* Validate transaction completion status. */
 	if (*p_status) {
 		dev_err(&client->dev, "Bad transaction completion status %x\n",
 			*p_status);
-		return -EIO;
+		err = -EIO;
 	}
 
-	return 0;
+mlxsw_i2c_write_exit:
+	kfree(tran_buf);
+	return err;
 }
 
 /* Routine executes I2C command. */
@@ -395,8 +406,8 @@ mlxsw_i2c_cmd(struct device *dev, u16 opcode, u32 in_mod, size_t in_mbox_size,
 
 	if (in_mbox) {
 		reg_size = mlxsw_i2c_get_reg_size(in_mbox);
-		num = reg_size / MLXSW_I2C_BLK_MAX;
-		if (reg_size % MLXSW_I2C_BLK_MAX)
+		num = reg_size / mlxsw_i2c->block_size;
+		if (reg_size % mlxsw_i2c->block_size)
 			num++;
 
 		if (mutex_lock_interruptible(&mlxsw_i2c->cmd.lock) < 0) {
@@ -416,7 +427,7 @@ mlxsw_i2c_cmd(struct device *dev, u16 opcode, u32 in_mod, size_t in_mbox_size,
 	} else {
 		/* No input mailbox is case of initialization query command. */
 		reg_size = MLXSW_I2C_MAX_DATA_SIZE;
-		num = reg_size / MLXSW_I2C_BLK_MAX;
+		num = reg_size / mlxsw_i2c->block_size;
 
 		if (mutex_lock_interruptible(&mlxsw_i2c->cmd.lock) < 0) {
 			dev_err(&client->dev, "Could not acquire lock");
@@ -432,8 +443,8 @@ mlxsw_i2c_cmd(struct device *dev, u16 opcode, u32 in_mod, size_t in_mbox_size,
 	/* Send read transaction to get output mailbox content. */
 	read_tran[1].buf = out_mbox;
 	for (i = 0; i < num; i++) {
-		chunk_size = (reg_size > MLXSW_I2C_BLK_MAX) ?
-			     MLXSW_I2C_BLK_MAX : reg_size;
+		chunk_size = (reg_size > mlxsw_i2c->block_size) ?
+			     mlxsw_i2c->block_size : reg_size;
 		read_tran[1].len = chunk_size;
 		mlxsw_i2c_set_slave_addr(tran_buf, off);
 
@@ -509,8 +520,20 @@ mlxsw_i2c_init(void *bus_priv, struct mlxsw_core *mlxsw_core,
 	if (!mbox)
 		return -ENOMEM;
 
+	err = mlxsw_cmd_query_fw(mlxsw_core, mbox);
+	if (err)
+		goto mbox_put;
+
+	mlxsw_i2c->bus_info.fw_rev.major =
+		mlxsw_cmd_mbox_query_fw_fw_rev_major_get(mbox);
+	mlxsw_i2c->bus_info.fw_rev.minor =
+		mlxsw_cmd_mbox_query_fw_fw_rev_minor_get(mbox);
+	mlxsw_i2c->bus_info.fw_rev.subminor =
+		mlxsw_cmd_mbox_query_fw_fw_rev_subminor_get(mbox);
+
 	err = mlxsw_core_resources_query(mlxsw_core, mbox, res);
 
+mbox_put:
 	mlxsw_cmd_mbox_free(mbox);
 	return err;
 }
@@ -534,6 +557,7 @@ static const struct mlxsw_bus mlxsw_i2c_bus = {
 static int mlxsw_i2c_probe(struct i2c_client *client,
 			   const struct i2c_device_id *id)
 {
+	const struct i2c_adapter_quirks *quirks = client->adapter->quirks;
 	struct mlxsw_i2c *mlxsw_i2c;
 	u8 status;
 	int err;
@@ -542,6 +566,22 @@ static int mlxsw_i2c_probe(struct i2c_client *client,
 	if (!mlxsw_i2c)
 		return -ENOMEM;
 
+	if (quirks) {
+		if ((quirks->max_read_len &&
+		     quirks->max_read_len < MLXSW_I2C_BLK_DEF) ||
+		    (quirks->max_write_len &&
+		     quirks->max_write_len < MLXSW_I2C_BLK_DEF)) {
+			dev_err(&client->dev, "Insufficient transaction buffer length\n");
+			return -EOPNOTSUPP;
+		}
+
+		mlxsw_i2c->block_size = max_t(u16, MLXSW_I2C_BLK_DEF,
+					      min_t(u16, quirks->max_read_len,
+						    quirks->max_write_len));
+	} else {
+		mlxsw_i2c->block_size = MLXSW_I2C_BLK_DEF;
+	}
+
 	i2c_set_clientdata(client, mlxsw_i2c);
 	mutex_init(&mlxsw_i2c->cmd.lock);