diff options
| author | Giuseppe CAVALLARO | 2013-04-08 04:10:01 +0200 |
|---|---|---|
| committer | David S. Miller | 2013-04-08 22:55:27 +0200 |
| commit | ceb694997e1b5d45627553ac7b1f88ff16cb9507 (patch) | |
| tree | 3ecfaa81fef92cee3b7665f2dc5ea996d4342162 /drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | |
| parent | stmmac: improve/review and fix kernel-doc (diff) | |
| download | kernel-qcow2-linux-ceb694997e1b5d45627553ac7b1f88ff16cb9507.tar.gz kernel-qcow2-linux-ceb694997e1b5d45627553ac7b1f88ff16cb9507.tar.xz kernel-qcow2-linux-ceb694997e1b5d45627553ac7b1f88ff16cb9507.zip | |
stmmac: code tidy-up
This patch tidies up the code. I have run Linden (and verified with checkpatch)
many part of the driver trying to reorganize some sections respecting the
codying-style rules in the points where it was not done.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 23 |
1 files changed, 13 insertions, 10 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c index f1c4b2c00aa5..2c431b616058 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -60,7 +60,7 @@ static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb, * depending on pbl value. */ value = DMA_BUS_MODE_PBL | ((pbl << DMA_BUS_MODE_PBL_SHIFT) | - (pbl << DMA_BUS_MODE_RPBL_SHIFT)); + (pbl << DMA_BUS_MODE_RPBL_SHIFT)); /* Set the Fixed burst mode */ if (fb) @@ -94,14 +94,16 @@ static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb, * * For Non Fixed Burst Mode: provide the maximum value of the * burst length. Any burst equal or below the provided burst - * length would be allowed to perform. */ + * length would be allowed to perform. + */ writel(burst_len, ioaddr + DMA_AXI_BUS_MODE); /* Mask interrupts by writing to CSR7 */ writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); - /* The base address of the RX/TX descriptor lists must be written into - * DMA CSR3 and CSR4, respectively. */ + /* RX/TX descriptor base address lists must be written into + * DMA CSR3 and CSR4, respectively + */ writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR); writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR); @@ -109,7 +111,7 @@ static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb, } static void dwmac1000_dma_operation_mode(void __iomem *ioaddr, int txmode, - int rxmode) + int rxmode) { u32 csr6 = readl(ioaddr + DMA_CONTROL); @@ -118,11 +120,12 @@ static void dwmac1000_dma_operation_mode(void __iomem *ioaddr, int txmode, /* Transmit COE type 2 cannot be done in cut-through mode. */ csr6 |= DMA_CONTROL_TSF; /* Operating on second frame increase the performance - * especially when transmit store-and-forward is used.*/ + * especially when transmit store-and-forward is used. + */ csr6 |= DMA_CONTROL_OSF; } else { - CHIP_DBG(KERN_DEBUG "GMAC: disabling TX store and forward mode" - " (threshold = %d)\n", txmode); + CHIP_DBG(KERN_DEBUG "GMAC: disabling TX SF (threshold %d)\n", + txmode); csr6 &= ~DMA_CONTROL_TSF; csr6 &= DMA_CONTROL_TC_TX_MASK; /* Set the transmit threshold */ @@ -142,8 +145,8 @@ static void dwmac1000_dma_operation_mode(void __iomem *ioaddr, int txmode, CHIP_DBG(KERN_DEBUG "GMAC: enable RX store and forward mode\n"); csr6 |= DMA_CONTROL_RSF; } else { - CHIP_DBG(KERN_DEBUG "GMAC: disabling RX store and forward mode" - " (threshold = %d)\n", rxmode); + CHIP_DBG(KERN_DEBUG "GMAC: disable RX SF mode (threshold %d)\n", + rxmode); csr6 &= ~DMA_CONTROL_RSF; csr6 &= DMA_CONTROL_TC_RX_MASK; if (rxmode <= 32) |