net: stmmac: Add support for DWMAC5 and implement Safety Features

This adds initial suport for DWMAC5 and implements the Automotive Safety
Package which is available from core version 5.10.

The Automotive Safety Pacakge (also called Safety Features) offers us
with error protection in the core by implementing ECC Protection in
memories, on-chip data path parity protection, FSM parity and timeout
protection and Application/CSR interface timeout protection.

In case of an uncorrectable error we call stmmac_global_err() and
reconfigure the whole core.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 34 insertions, 0 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index b75ecf3d19fe..9a16931ce39d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2014,6 +2014,22 @@ static void stmmac_set_dma_operation_mode(struct stmmac_priv *priv, u32 txmode,
 	}
 }
 
+static bool stmmac_safety_feat_interrupt(struct stmmac_priv *priv)
+{
+	bool ret = false;
+
+	/* Safety features are only available in cores >= 5.10 */
+	if (priv->synopsys_id < DWMAC_CORE_5_10)
+		return ret;
+	if (priv->hw->mac->safety_feat_irq_status)
+		ret = priv->hw->mac->safety_feat_irq_status(priv->dev,
+				priv->ioaddr, priv->dma_cap.asp, &priv->sstats);
+
+	if (ret)
+		stmmac_global_err(priv);
+	return ret;
+}
+
 /**
  * stmmac_dma_interrupt - DMA ISR
  * @priv: driver private structure
@@ -2503,6 +2519,17 @@ static void stmmac_mtl_configuration(struct stmmac_priv *priv)
 		stmmac_mac_config_rx_queues_routing(priv);
 }
 
+static void stmmac_safety_feat_configuration(struct stmmac_priv *priv)
+{
+	if (priv->hw->mac->safety_feat_config && priv->dma_cap.asp) {
+		netdev_info(priv->dev, "Enabling Safety Features\n");
+		priv->hw->mac->safety_feat_config(priv->ioaddr,
+				priv->dma_cap.asp);
+	} else {
+		netdev_info(priv->dev, "No Safety Features support found\n");
+	}
+}
+
 /**
  * stmmac_hw_setup - setup mac in a usable state.
  *  @dev : pointer to the device structure.
@@ -2554,6 +2581,10 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
 	if (priv->synopsys_id >= DWMAC_CORE_4_00)
 		stmmac_mtl_configuration(priv);
 
+	/* Initialize Safety Features */
+	if (priv->synopsys_id >= DWMAC_CORE_5_10)
+		stmmac_safety_feat_configuration(priv);
+
 	ret = priv->hw->mac->rx_ipc(priv->hw);
 	if (!ret) {
 		netdev_warn(priv->dev, "RX IPC Checksum Offload disabled\n");
@@ -3729,6 +3760,9 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
 	/* Check if adapter is up */
 	if (test_bit(STMMAC_DOWN, &priv->state))
 		return IRQ_HANDLED;
+	/* Check if a fatal error happened */
+	if (stmmac_safety_feat_interrupt(priv))
+		return IRQ_HANDLED;
 
 	/* To handle GMAC own interrupts */
 	if ((priv->plat->has_gmac) || (priv->plat->has_gmac4)) {