ixgbe: Move PHY ops initialization to centralize bus accesses

When PHY operations are determined, the PHY must be identified.  This
identification causes bus access, and should be contained within its own
routines.  This also helps the 82599 PHY init paths for both SFP+ and
KX/KX4 devices to be easier to maintain.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 46 insertions, 24 deletions

diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index beae7e012609..9a9998985004 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -148,51 +148,60 @@ u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw)
 static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
 {
 	struct ixgbe_mac_info *mac = &hw->mac;
-	struct ixgbe_phy_info *phy = &hw->phy;
-	s32 ret_val;
 
-	/* Set the bus information prior to PHY identification */
-	mac->ops.get_bus_info(hw);
+	ixgbe_init_mac_link_ops_82599(hw);
 
-	/* Call PHY identify routine to get the Cu or SFI phy type */
-	ret_val = phy->ops.identify(hw);
+	mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
+	mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
+	mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
+	mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
+	mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
+	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw);
 
-	if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
-		goto get_invariants_out;
+	return 0;
+}
 
-	ixgbe_init_mac_link_ops_82599(hw);
+/**
+ *  ixgbe_init_phy_ops_82599 - PHY/SFP specific init
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize any function pointers that were not able to be
+ *  set during get_invariants because the PHY/SFP type was
+ *  not known.  Perform the SFP init if necessary.
+ *
+ **/
+s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	struct ixgbe_phy_info *phy = &hw->phy;
+	s32 ret_val = 0;
 
-	/* Setup SFP module if there is one present. */
-	ret_val = mac->ops.setup_sfp(hw);
+	/* Identify the PHY or SFP module */
+	ret_val = phy->ops.identify(hw);
+
+	/* Setup function pointers based on detected SFP module and speeds */
+	ixgbe_init_mac_link_ops_82599(hw);
 
 	/* If copper media, overwrite with copper function pointers */
 	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
 		mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
 		mac->ops.setup_link_speed =
-		                  &ixgbe_setup_copper_link_speed_82599;
+		                     &ixgbe_setup_copper_link_speed_82599;
 		mac->ops.get_link_capabilities =
 		                  &ixgbe_get_copper_link_capabilities_82599;
 	}
 
-	/* PHY Init */
+	/* Set necessary function pointers based on phy type */
 	switch (hw->phy.type) {
 	case ixgbe_phy_tn:
 		phy->ops.check_link = &ixgbe_check_phy_link_tnx;
 		phy->ops.get_firmware_version =
-		                  &ixgbe_get_phy_firmware_version_tnx;
+		             &ixgbe_get_phy_firmware_version_tnx;
 		break;
 	default:
 		break;
 	}
 
-	mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
-	mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
-	mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
-	mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
-	mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
-	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw);
-
-get_invariants_out:
 	return ret_val;
 }
 
@@ -708,13 +717,24 @@ s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
 	hw->mac.ops.stop_adapter(hw);
 
 	/* Reset PHY */
-	hw->phy.ops.reset(hw);
+	if (hw->phy.reset_disable == false) {
+		/* PHY ops must be identified and initialized prior to reset */
+
+		/* Init PHY and function pointers, perform SFP setup */
+		status = hw->phy.ops.init(hw);
+
+		if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+			goto reset_hw_out;
+
+		hw->phy.ops.reset(hw);
+	}
 
 	/*
 	 * Prevent the PCI-E bus from from hanging by disabling PCI-E master
 	 * access and verify no pending requests before reset
 	 */
-	if (ixgbe_disable_pcie_master(hw) != 0) {
+	status = ixgbe_disable_pcie_master(hw);
+	if (status != 0) {
 		status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
 		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
 	}
@@ -775,6 +795,7 @@ s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
 	/* Store the permanent mac address */
 	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
 
+reset_hw_out:
 	return status;
 }
 
@@ -1272,6 +1293,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
 static struct ixgbe_phy_operations phy_ops_82599 = {
 	.identify               = &ixgbe_identify_phy_82599,
 	.identify_sfp           = &ixgbe_identify_sfp_module_generic,
+	.init			= &ixgbe_init_phy_ops_82599,
 	.reset                  = &ixgbe_reset_phy_generic,
 	.read_reg               = &ixgbe_read_phy_reg_generic,
 	.write_reg              = &ixgbe_write_phy_reg_generic,