diff options
author | Linus Torvalds | 2019-05-08 07:03:58 +0200 |
---|---|---|
committer | Linus Torvalds | 2019-05-08 07:03:58 +0200 |
commit | 80f232121b69cc69a31ccb2b38c1665d770b0710 (patch) | |
tree | 106263eac4ff03b899df695e00dd11e593e74fe2 /drivers/net/phy/marvell.c | |
parent | Merge tag 'devicetree-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/g... (diff) | |
parent | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net (diff) | |
download | kernel-qcow2-linux-80f232121b69cc69a31ccb2b38c1665d770b0710.tar.gz kernel-qcow2-linux-80f232121b69cc69a31ccb2b38c1665d770b0710.tar.xz kernel-qcow2-linux-80f232121b69cc69a31ccb2b38c1665d770b0710.zip |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"Highlights:
1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.
2) Add fib_sync_mem to control the amount of dirty memory we allow to
queue up between synchronize RCU calls, from David Ahern.
3) Make flow classifier more lockless, from Vlad Buslov.
4) Add PHY downshift support to aquantia driver, from Heiner
Kallweit.
5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
contention on SLAB spinlocks in heavy RPC workloads.
6) Partial GSO offload support in XFRM, from Boris Pismenny.
7) Add fast link down support to ethtool, from Heiner Kallweit.
8) Use siphash for IP ID generator, from Eric Dumazet.
9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
entries, from David Ahern.
10) Move skb->xmit_more into a per-cpu variable, from Florian
Westphal.
11) Improve eBPF verifier speed and increase maximum program size,
from Alexei Starovoitov.
12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
spinlocks. From Neil Brown.
13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.
14) Improve link partner cap detection in generic PHY code, from
Heiner Kallweit.
15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
Maguire.
16) Remove SKB list implementation assumptions in SCTP, your's truly.
17) Various cleanups, optimizations, and simplifications in r8169
driver. From Heiner Kallweit.
18) Add memory accounting on TX and RX path of SCTP, from Xin Long.
19) Switch PHY drivers over to use dynamic featue detection, from
Heiner Kallweit.
20) Support flow steering without masking in dpaa2-eth, from Ioana
Ciocoi.
21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
Pirko.
22) Increase the strict parsing of current and future netlink
attributes, also export such policies to userspace. From Johannes
Berg.
23) Allow DSA tag drivers to be modular, from Andrew Lunn.
24) Remove legacy DSA probing support, also from Andrew Lunn.
25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
Haabendal.
26) Add a generic tracepoint for TX queue timeouts to ease debugging,
from Cong Wang.
27) More indirect call optimizations, from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
cxgb4: Fix error path in cxgb4_init_module
net: phy: improve pause mode reporting in phy_print_status
dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
net: macb: Change interrupt and napi enable order in open
net: ll_temac: Improve error message on error IRQ
net/sched: remove block pointer from common offload structure
net: ethernet: support of_get_mac_address new ERR_PTR error
net: usb: smsc: fix warning reported by kbuild test robot
staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
net: dsa: support of_get_mac_address new ERR_PTR error
net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
vrf: sit mtu should not be updated when vrf netdev is the link
net: dsa: Fix error cleanup path in dsa_init_module
l2tp: Fix possible NULL pointer dereference
taprio: add null check on sched_nest to avoid potential null pointer dereference
net: mvpp2: cls: fix less than zero check on a u32 variable
net_sched: sch_fq: handle non connected flows
net_sched: sch_fq: do not assume EDT packets are ordered
net: hns3: use devm_kcalloc when allocating desc_cb
net: hns3: some cleanup for struct hns3_enet_ring
...
Diffstat (limited to 'drivers/net/phy/marvell.c')
-rw-r--r-- | drivers/net/phy/marvell.c | 142 |
1 files changed, 127 insertions, 15 deletions
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index f76c4048b978..a7796134e3be 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -29,6 +29,7 @@ #include <linux/ethtool.h> #include <linux/phy.h> #include <linux/marvell_phy.h> +#include <linux/bitfield.h> #include <linux/of.h> #include <linux/io.h> @@ -91,6 +92,14 @@ #define MII_88E1510_TEMP_SENSOR 0x1b #define MII_88E1510_TEMP_SENSOR_MASK 0xff +#define MII_88E1540_COPPER_CTRL3 0x1a +#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK GENMASK(11, 10) +#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_00MS 0 +#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_10MS 1 +#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_20MS 2 +#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_40MS 3 +#define MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN BIT(9) + #define MII_88E6390_MISC_TEST 0x1b #define MII_88E6390_MISC_TEST_SAMPLE_1S 0 #define MII_88E6390_MISC_TEST_SAMPLE_10MS BIT(14) @@ -128,6 +137,7 @@ #define MII_PHY_LED_CTRL 16 #define MII_88E1121_PHY_LED_DEF 0x0030 #define MII_88E1510_PHY_LED_DEF 0x1177 +#define MII_88E1510_PHY_LED0_LINK_LED1_ACTIVE 0x1040 #define MII_M1011_PHY_STATUS 0x11 #define MII_M1011_PHY_STATUS_1000 0x8000 @@ -624,7 +634,10 @@ static void marvell_config_led(struct phy_device *phydev) * LED[2] .. Blink, Activity */ case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1510): - def_config = MII_88E1510_PHY_LED_DEF; + if (phydev->dev_flags & MARVELL_PHY_LED0_LINK_LED1_ACTIVE) + def_config = MII_88E1510_PHY_LED0_LINK_LED1_ACTIVE; + else + def_config = MII_88E1510_PHY_LED_DEF; break; default: return; @@ -1025,6 +1038,101 @@ static int m88e1145_config_init(struct phy_device *phydev) return 0; } +static int m88e1540_get_fld(struct phy_device *phydev, u8 *msecs) +{ + int val; + + val = phy_read(phydev, MII_88E1540_COPPER_CTRL3); + if (val < 0) + return val; + + if (!(val & MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN)) { + *msecs = ETHTOOL_PHY_FAST_LINK_DOWN_OFF; + return 0; + } + + val = FIELD_GET(MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK, val); + + switch (val) { + case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_00MS: + *msecs = 0; + break; + case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_10MS: + *msecs = 10; + break; + case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_20MS: + *msecs = 20; + break; + case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_40MS: + *msecs = 40; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int m88e1540_set_fld(struct phy_device *phydev, const u8 *msecs) +{ + struct ethtool_eee eee; + int val, ret; + + if (*msecs == ETHTOOL_PHY_FAST_LINK_DOWN_OFF) + return phy_clear_bits(phydev, MII_88E1540_COPPER_CTRL3, + MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN); + + /* According to the Marvell data sheet EEE must be disabled for + * Fast Link Down detection to work properly + */ + ret = phy_ethtool_get_eee(phydev, &eee); + if (!ret && eee.eee_enabled) { + phydev_warn(phydev, "Fast Link Down detection requires EEE to be disabled!\n"); + return -EBUSY; + } + + if (*msecs <= 5) + val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_00MS; + else if (*msecs <= 15) + val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_10MS; + else if (*msecs <= 30) + val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_20MS; + else + val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_40MS; + + val = FIELD_PREP(MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK, val); + + ret = phy_modify(phydev, MII_88E1540_COPPER_CTRL3, + MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK, val); + if (ret) + return ret; + + return phy_set_bits(phydev, MII_88E1540_COPPER_CTRL3, + MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN); +} + +static int m88e1540_get_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_FAST_LINK_DOWN: + return m88e1540_get_fld(phydev, data); + default: + return -EOPNOTSUPP; + } +} + +static int m88e1540_set_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, const void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_FAST_LINK_DOWN: + return m88e1540_set_fld(phydev, data); + default: + return -EOPNOTSUPP; + } +} + /* The VOD can be out of specification on link up. Poke an * undocumented register, in an undocumented page, with a magic value * to fix this. @@ -2024,7 +2132,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id = MARVELL_PHY_ID_88E1101, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1101", - .features = PHY_GBIT_FEATURES, + /* PHY_GBIT_FEATURES */ .probe = marvell_probe, .config_init = &marvell_config_init, .config_aneg = &m88e1101_config_aneg, @@ -2042,7 +2150,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id = MARVELL_PHY_ID_88E1112, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1112", - .features = PHY_GBIT_FEATURES, + /* PHY_GBIT_FEATURES */ .probe = marvell_probe, .config_init = &m88e1111_config_init, .config_aneg = &marvell_config_aneg, @@ -2060,7 +2168,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id = MARVELL_PHY_ID_88E1111, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1111", - .features = PHY_GBIT_FEATURES, + /* PHY_GBIT_FEATURES */ .probe = marvell_probe, .config_init = &m88e1111_config_init, .config_aneg = &marvell_config_aneg, @@ -2079,7 +2187,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id = MARVELL_PHY_ID_88E1118, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1118", - .features = PHY_GBIT_FEATURES, + /* PHY_GBIT_FEATURES */ .probe = marvell_probe, .config_init = &m88e1118_config_init, .config_aneg = &m88e1118_config_aneg, @@ -2097,7 +2205,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id = MARVELL_PHY_ID_88E1121R, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1121R", - .features = PHY_GBIT_FEATURES, + /* PHY_GBIT_FEATURES */ .probe = &m88e1121_probe, .config_init = &marvell_config_init, .config_aneg = &m88e1121_config_aneg, @@ -2117,7 +2225,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id = MARVELL_PHY_ID_88E1318S, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1318S", - .features = PHY_GBIT_FEATURES, + /* PHY_GBIT_FEATURES */ .probe = marvell_probe, .config_init = &m88e1318_config_init, .config_aneg = &m88e1318_config_aneg, @@ -2139,7 +2247,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id = MARVELL_PHY_ID_88E1145, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1145", - .features = PHY_GBIT_FEATURES, + /* PHY_GBIT_FEATURES */ .probe = marvell_probe, .config_init = &m88e1145_config_init, .config_aneg = &m88e1101_config_aneg, @@ -2158,7 +2266,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id = MARVELL_PHY_ID_88E1149R, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1149R", - .features = PHY_GBIT_FEATURES, + /* PHY_GBIT_FEATURES */ .probe = marvell_probe, .config_init = &m88e1149_config_init, .config_aneg = &m88e1118_config_aneg, @@ -2176,7 +2284,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id = MARVELL_PHY_ID_88E1240, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1240", - .features = PHY_GBIT_FEATURES, + /* PHY_GBIT_FEATURES */ .probe = marvell_probe, .config_init = &m88e1111_config_init, .config_aneg = &marvell_config_aneg, @@ -2194,7 +2302,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id = MARVELL_PHY_ID_88E1116R, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1116R", - .features = PHY_GBIT_FEATURES, + /* PHY_GBIT_FEATURES */ .probe = marvell_probe, .config_init = &m88e1116r_config_init, .ack_interrupt = &marvell_ack_interrupt, @@ -2234,7 +2342,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id = MARVELL_PHY_ID_88E1540, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1540", - .features = PHY_GBIT_FEATURES, + /* PHY_GBIT_FEATURES */ .probe = m88e1510_probe, .config_init = &marvell_config_init, .config_aneg = &m88e1510_config_aneg, @@ -2249,13 +2357,15 @@ static struct phy_driver marvell_drivers[] = { .get_sset_count = marvell_get_sset_count, .get_strings = marvell_get_strings, .get_stats = marvell_get_stats, + .get_tunable = m88e1540_get_tunable, + .set_tunable = m88e1540_set_tunable, }, { .phy_id = MARVELL_PHY_ID_88E1545, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1545", .probe = m88e1510_probe, - .features = PHY_GBIT_FEATURES, + /* PHY_GBIT_FEATURES */ .config_init = &marvell_config_init, .config_aneg = &m88e1510_config_aneg, .read_status = &marvell_read_status, @@ -2274,7 +2384,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id = MARVELL_PHY_ID_88E3016, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E3016", - .features = PHY_BASIC_FEATURES, + /* PHY_BASIC_FEATURES */ .probe = marvell_probe, .config_init = &m88e3016_config_init, .aneg_done = &marvell_aneg_done, @@ -2294,7 +2404,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id = MARVELL_PHY_ID_88E6390, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E6390", - .features = PHY_GBIT_FEATURES, + /* PHY_GBIT_FEATURES */ .probe = m88e6390_probe, .config_init = &marvell_config_init, .config_aneg = &m88e6390_config_aneg, @@ -2309,6 +2419,8 @@ static struct phy_driver marvell_drivers[] = { .get_sset_count = marvell_get_sset_count, .get_strings = marvell_get_strings, .get_stats = marvell_get_stats, + .get_tunable = m88e1540_get_tunable, + .set_tunable = m88e1540_set_tunable, }, }; |