Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.

   2) Add fib_sync_mem to control the amount of dirty memory we allow to
      queue up between synchronize RCU calls, from David Ahern.

   3) Make flow classifier more lockless, from Vlad Buslov.

   4) Add PHY downshift support to aquantia driver, from Heiner
      Kallweit.

   5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
      contention on SLAB spinlocks in heavy RPC workloads.

   6) Partial GSO offload support in XFRM, from Boris Pismenny.

   7) Add fast link down support to ethtool, from Heiner Kallweit.

   8) Use siphash for IP ID generator, from Eric Dumazet.

   9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
      entries, from David Ahern.

  10) Move skb->xmit_more into a per-cpu variable, from Florian
      Westphal.

  11) Improve eBPF verifier speed and increase maximum program size,
      from Alexei Starovoitov.

  12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
      spinlocks. From Neil Brown.

  13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.

  14) Improve link partner cap detection in generic PHY code, from
      Heiner Kallweit.

  15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
      Maguire.

  16) Remove SKB list implementation assumptions in SCTP, your's truly.

  17) Various cleanups, optimizations, and simplifications in r8169
      driver. From Heiner Kallweit.

  18) Add memory accounting on TX and RX path of SCTP, from Xin Long.

  19) Switch PHY drivers over to use dynamic featue detection, from
      Heiner Kallweit.

  20) Support flow steering without masking in dpaa2-eth, from Ioana
      Ciocoi.

  21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
      Pirko.

  22) Increase the strict parsing of current and future netlink
      attributes, also export such policies to userspace. From Johannes
      Berg.

  23) Allow DSA tag drivers to be modular, from Andrew Lunn.

  24) Remove legacy DSA probing support, also from Andrew Lunn.

  25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
      Haabendal.

  26) Add a generic tracepoint for TX queue timeouts to ease debugging,
      from Cong Wang.

  27) More indirect call optimizations, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
  cxgb4: Fix error path in cxgb4_init_module
  net: phy: improve pause mode reporting in phy_print_status
  dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
  net: macb: Change interrupt and napi enable order in open
  net: ll_temac: Improve error message on error IRQ
  net/sched: remove block pointer from common offload structure
  net: ethernet: support of_get_mac_address new ERR_PTR error
  net: usb: smsc: fix warning reported by kbuild test robot
  staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
  net: dsa: support of_get_mac_address new ERR_PTR error
  net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
  vrf: sit mtu should not be updated when vrf netdev is the link
  net: dsa: Fix error cleanup path in dsa_init_module
  l2tp: Fix possible NULL pointer dereference
  taprio: add null check on sched_nest to avoid potential null pointer dereference
  net: mvpp2: cls: fix less than zero check on a u32 variable
  net_sched: sch_fq: handle non connected flows
  net_sched: sch_fq: do not assume EDT packets are ordered
  net: hns3: use devm_kcalloc when allocating desc_cb
  net: hns3: some cleanup for struct hns3_enet_ring
  ...

1 files changed, 473 insertions, 6 deletions

diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index db50efb30df5..28676af97b42 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -85,12 +85,49 @@ enum rgmii_rx_clock_delay {
 #define LED_MODE_SEL_MASK(x)		  (GENMASK(3, 0) << LED_MODE_SEL_POS(x))
 #define LED_MODE_SEL(x, mode)		  (((mode) << LED_MODE_SEL_POS(x)) & LED_MODE_SEL_MASK(x))
 
+#define MSCC_EXT_PAGE_CSR_CNTL_17	  17
+#define MSCC_EXT_PAGE_CSR_CNTL_18	  18
+
+#define MSCC_EXT_PAGE_CSR_CNTL_19	  19
+#define MSCC_PHY_CSR_CNTL_19_REG_ADDR(x)  (x)
+#define MSCC_PHY_CSR_CNTL_19_TARGET(x)	  ((x) << 12)
+#define MSCC_PHY_CSR_CNTL_19_READ	  BIT(14)
+#define MSCC_PHY_CSR_CNTL_19_CMD	  BIT(15)
+
+#define MSCC_EXT_PAGE_CSR_CNTL_20	  20
+#define MSCC_PHY_CSR_CNTL_20_TARGET(x)	  (x)
+
+#define PHY_MCB_TARGET			  0x07
+#define PHY_MCB_S6G_WRITE		  BIT(31)
+#define PHY_MCB_S6G_READ		  BIT(30)
+
+#define PHY_S6G_PLL5G_CFG0		  0x06
+#define PHY_S6G_LCPLL_CFG		  0x11
+#define PHY_S6G_PLL_CFG			  0x2b
+#define PHY_S6G_COMMON_CFG		  0x2c
+#define PHY_S6G_GPC_CFG			  0x2e
+#define PHY_S6G_MISC_CFG		  0x3b
+#define PHY_MCB_S6G_CFG			  0x3f
+#define PHY_S6G_DFT_CFG2		  0x3e
+#define PHY_S6G_PLL_STATUS		  0x31
+#define PHY_S6G_IB_STATUS0		  0x2f
+
+#define PHY_S6G_SYS_RST_POS		  31
+#define PHY_S6G_ENA_LANE_POS		  18
+#define PHY_S6G_ENA_LOOP_POS		  8
+#define PHY_S6G_QRATE_POS		  6
+#define PHY_S6G_IF_MODE_POS		  4
+#define PHY_S6G_PLL_ENA_OFFS_POS	  21
+#define PHY_S6G_PLL_FSM_CTRL_DATA_POS	  8
+#define PHY_S6G_PLL_FSM_ENA_POS		  7
+
 #define MSCC_EXT_PAGE_ACCESS		  31
 #define MSCC_PHY_PAGE_STANDARD		  0x0000 /* Standard registers */
 #define MSCC_PHY_PAGE_EXTENDED		  0x0001 /* Extended registers */
 #define MSCC_PHY_PAGE_EXTENDED_2	  0x0002 /* Extended reg - page 2 */
 #define MSCC_PHY_PAGE_EXTENDED_3	  0x0003 /* Extended reg - page 3 */
 #define MSCC_PHY_PAGE_EXTENDED_4	  0x0004 /* Extended reg - page 4 */
+#define MSCC_PHY_PAGE_CSR_CNTL		  MSCC_PHY_PAGE_EXTENDED_4
 /* Extended reg - GPIO; this is a bank of registers that are shared for all PHYs
  * in the same package.
  */
@@ -216,6 +253,7 @@ enum rgmii_rx_clock_delay {
 #define MSCC_PHY_TR_MSB			  18
 
 /* Microsemi PHY ID's */
+#define PHY_ID_VSC8514			  0x00070670
 #define PHY_ID_VSC8530			  0x00070560
 #define PHY_ID_VSC8531			  0x00070570
 #define PHY_ID_VSC8540			  0x00070760
@@ -1742,6 +1780,386 @@ static int vsc8584_did_interrupt(struct phy_device *phydev)
 	return (rc < 0) ? 0 : rc & MII_VSC85XX_INT_MASK_MASK;
 }
 
+static int vsc8514_config_pre_init(struct phy_device *phydev)
+{
+	/* These are the settings to override the silicon default
+	 * values to handle hardware performance of PHY. They
+	 * are set at Power-On state and remain until PHY Reset.
+	 */
+	const struct reg_val pre_init1[] = {
+		{0x0f90, 0x00688980},
+		{0x0786, 0x00000003},
+		{0x07fa, 0x0050100f},
+		{0x0f82, 0x0012b002},
+		{0x1686, 0x00000004},
+		{0x168c, 0x00d2c46f},
+		{0x17a2, 0x00000620},
+		{0x16a0, 0x00eeffdd},
+		{0x16a6, 0x00071448},
+		{0x16a4, 0x0013132f},
+		{0x16a8, 0x00000000},
+		{0x0ffc, 0x00c0a028},
+		{0x0fe8, 0x0091b06c},
+		{0x0fea, 0x00041600},
+		{0x0f80, 0x00fffaff},
+		{0x0fec, 0x00901809},
+		{0x0ffe, 0x00b01007},
+		{0x16b0, 0x00eeff00},
+		{0x16b2, 0x00007000},
+		{0x16b4, 0x00000814},
+	};
+	unsigned int i;
+	u16 reg;
+
+	phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
+
+	/* all writes below are broadcasted to all PHYs in the same package */
+	reg = phy_base_read(phydev, MSCC_PHY_EXT_CNTL_STATUS);
+	reg |= SMI_BROADCAST_WR_EN;
+	phy_base_write(phydev, MSCC_PHY_EXT_CNTL_STATUS, reg);
+
+	phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TEST);
+
+	reg = phy_base_read(phydev, MSCC_PHY_TEST_PAGE_8);
+	reg |= BIT(15);
+	phy_base_write(phydev, MSCC_PHY_TEST_PAGE_8, reg);
+
+	phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TR);
+
+	for (i = 0; i < ARRAY_SIZE(pre_init1); i++)
+		vsc8584_csr_write(phydev, pre_init1[i].reg, pre_init1[i].val);
+
+	phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TEST);
+
+	reg = phy_base_read(phydev, MSCC_PHY_TEST_PAGE_8);
+	reg &= ~BIT(15);
+	phy_base_write(phydev, MSCC_PHY_TEST_PAGE_8, reg);
+
+	phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
+
+	reg = phy_base_read(phydev, MSCC_PHY_EXT_CNTL_STATUS);
+	reg &= ~SMI_BROADCAST_WR_EN;
+	phy_base_write(phydev, MSCC_PHY_EXT_CNTL_STATUS, reg);
+
+	return 0;
+}
+
+static u32 vsc85xx_csr_ctrl_phy_read(struct phy_device *phydev,
+				     u32 target, u32 reg)
+{
+	unsigned long deadline;
+	u32 val, val_l, val_h;
+
+	phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_CSR_CNTL);
+
+	/* CSR registers are grouped under different Target IDs.
+	 * 6-bit Target_ID is split between MSCC_EXT_PAGE_CSR_CNTL_20 and
+	 * MSCC_EXT_PAGE_CSR_CNTL_19 registers.
+	 * Target_ID[5:2] maps to bits[3:0] of MSCC_EXT_PAGE_CSR_CNTL_20
+	 * and Target_ID[1:0] maps to bits[13:12] of MSCC_EXT_PAGE_CSR_CNTL_19.
+	 */
+
+	/* Setup the Target ID */
+	phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_20,
+		       MSCC_PHY_CSR_CNTL_20_TARGET(target >> 2));
+
+	/* Trigger CSR Action - Read into the CSR's */
+	phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_19,
+		       MSCC_PHY_CSR_CNTL_19_CMD | MSCC_PHY_CSR_CNTL_19_READ |
+		       MSCC_PHY_CSR_CNTL_19_REG_ADDR(reg) |
+		       MSCC_PHY_CSR_CNTL_19_TARGET(target & 0x3));
+
+	/* Wait for register access*/
+	deadline = jiffies + msecs_to_jiffies(PROC_CMD_NCOMPLETED_TIMEOUT_MS);
+	do {
+		usleep_range(500, 1000);
+		val = phy_base_read(phydev, MSCC_EXT_PAGE_CSR_CNTL_19);
+	} while (time_before(jiffies, deadline) &&
+		!(val & MSCC_PHY_CSR_CNTL_19_CMD));
+
+	if (!(val & MSCC_PHY_CSR_CNTL_19_CMD))
+		return 0xffffffff;
+
+	/* Read the Least Significant Word (LSW) (17) */
+	val_l = phy_base_read(phydev, MSCC_EXT_PAGE_CSR_CNTL_17);
+
+	/* Read the Most Significant Word (MSW) (18) */
+	val_h = phy_base_read(phydev, MSCC_EXT_PAGE_CSR_CNTL_18);
+
+	phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
+		       MSCC_PHY_PAGE_STANDARD);
+
+	return (val_h << 16) | val_l;
+}
+
+static int vsc85xx_csr_ctrl_phy_write(struct phy_device *phydev,
+				      u32 target, u32 reg, u32 val)
+{
+	unsigned long deadline;
+
+	phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_CSR_CNTL);
+
+	/* CSR registers are grouped under different Target IDs.
+	 * 6-bit Target_ID is split between MSCC_EXT_PAGE_CSR_CNTL_20 and
+	 * MSCC_EXT_PAGE_CSR_CNTL_19 registers.
+	 * Target_ID[5:2] maps to bits[3:0] of MSCC_EXT_PAGE_CSR_CNTL_20
+	 * and Target_ID[1:0] maps to bits[13:12] of MSCC_EXT_PAGE_CSR_CNTL_19.
+	 */
+
+	/* Setup the Target ID */
+	phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_20,
+		       MSCC_PHY_CSR_CNTL_20_TARGET(target >> 2));
+
+	/* Write the Least Significant Word (LSW) (17) */
+	phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_17, (u16)val);
+
+	/* Write the Most Significant Word (MSW) (18) */
+	phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_18, (u16)(val >> 16));
+
+	/* Trigger CSR Action - Write into the CSR's */
+	phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_19,
+		       MSCC_PHY_CSR_CNTL_19_CMD |
+		       MSCC_PHY_CSR_CNTL_19_REG_ADDR(reg) |
+		       MSCC_PHY_CSR_CNTL_19_TARGET(target & 0x3));
+
+	/* Wait for register access */
+	deadline = jiffies + msecs_to_jiffies(PROC_CMD_NCOMPLETED_TIMEOUT_MS);
+	do {
+		usleep_range(500, 1000);
+		val = phy_base_read(phydev, MSCC_EXT_PAGE_CSR_CNTL_19);
+	} while (time_before(jiffies, deadline) &&
+		 !(val & MSCC_PHY_CSR_CNTL_19_CMD));
+
+	if (!(val & MSCC_PHY_CSR_CNTL_19_CMD))
+		return -ETIMEDOUT;
+
+	phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
+		       MSCC_PHY_PAGE_STANDARD);
+
+	return 0;
+}
+
+static int __phy_write_mcb_s6g(struct phy_device *phydev, u32 reg, u8 mcb,
+			       u32 op)
+{
+	unsigned long deadline;
+	u32 val;
+	int ret;
+
+	ret = vsc85xx_csr_ctrl_phy_write(phydev, PHY_MCB_TARGET, reg,
+					 op | (1 << mcb));
+	if (ret)
+		return -EINVAL;
+
+	deadline = jiffies + msecs_to_jiffies(PROC_CMD_NCOMPLETED_TIMEOUT_MS);
+	do {
+		usleep_range(500, 1000);
+		val = vsc85xx_csr_ctrl_phy_read(phydev, PHY_MCB_TARGET, reg);
+
+		if (val == 0xffffffff)
+			return -EIO;
+
+	} while (time_before(jiffies, deadline) && (val & op));
+
+	if (val & op)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+/* Trigger a read to the spcified MCB */
+static int phy_update_mcb_s6g(struct phy_device *phydev, u32 reg, u8 mcb)
+{
+	return __phy_write_mcb_s6g(phydev, reg, mcb, PHY_MCB_S6G_READ);
+}
+
+/* Trigger a write to the spcified MCB */
+static int phy_commit_mcb_s6g(struct phy_device *phydev, u32 reg, u8 mcb)
+{
+	return __phy_write_mcb_s6g(phydev, reg, mcb, PHY_MCB_S6G_WRITE);
+}
+
+static int vsc8514_config_init(struct phy_device *phydev)
+{
+	struct vsc8531_private *vsc8531 = phydev->priv;
+	unsigned long deadline;
+	u16 val, addr;
+	int ret, i;
+	u32 reg;
+
+	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+
+	mutex_lock(&phydev->mdio.bus->mdio_lock);
+
+	__phy_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED);
+
+	addr = __phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_4);
+	addr >>= PHY_CNTL_4_ADDR_POS;
+
+	val = __phy_read(phydev, MSCC_PHY_ACTIPHY_CNTL);
+
+	if (val & PHY_ADDR_REVERSED)
+		vsc8531->base_addr = phydev->mdio.addr + addr;
+	else
+		vsc8531->base_addr = phydev->mdio.addr - addr;
+
+	/* Some parts of the init sequence are identical for every PHY in the
+	 * package. Some parts are modifying the GPIO register bank which is a
+	 * set of registers that are affecting all PHYs, a few resetting the
+	 * microprocessor common to all PHYs.
+	 * All PHYs' interrupts mask register has to be zeroed before enabling
+	 * any PHY's interrupt in this register.
+	 * For all these reasons, we need to do the init sequence once and only
+	 * once whatever is the first PHY in the package that is initialized and
+	 * do the correct init sequence for all PHYs that are package-critical
+	 * in this pre-init function.
+	 */
+	if (!vsc8584_is_pkg_init(phydev, val & PHY_ADDR_REVERSED ? 1 : 0))
+		vsc8514_config_pre_init(phydev);
+
+	vsc8531->pkg_init = true;
+
+	phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
+		       MSCC_PHY_PAGE_EXTENDED_GPIO);
+
+	val = phy_base_read(phydev, MSCC_PHY_MAC_CFG_FASTLINK);
+
+	val &= ~MAC_CFG_MASK;
+	val |= MAC_CFG_QSGMII;
+	ret = phy_base_write(phydev, MSCC_PHY_MAC_CFG_FASTLINK, val);
+
+	if (ret)
+		goto err;
+
+	ret = vsc8584_cmd(phydev,
+			  PROC_CMD_MCB_ACCESS_MAC_CONF |
+			  PROC_CMD_RST_CONF_PORT |
+			  PROC_CMD_READ_MOD_WRITE_PORT | PROC_CMD_QSGMII_MAC);
+	if (ret)
+		goto err;
+
+	/* 6g mcb */
+	phy_update_mcb_s6g(phydev, PHY_MCB_S6G_CFG, 0);
+	/* lcpll mcb */
+	phy_update_mcb_s6g(phydev, PHY_S6G_LCPLL_CFG, 0);
+	/* pll5gcfg0 */
+	ret = vsc85xx_csr_ctrl_phy_write(phydev, PHY_MCB_TARGET,
+					 PHY_S6G_PLL5G_CFG0, 0x7036f145);
+	if (ret)
+		goto err;
+
+	phy_commit_mcb_s6g(phydev, PHY_S6G_LCPLL_CFG, 0);
+	/* pllcfg */
+	ret = vsc85xx_csr_ctrl_phy_write(phydev, PHY_MCB_TARGET,
+					 PHY_S6G_PLL_CFG,
+					 (3 << PHY_S6G_PLL_ENA_OFFS_POS) |
+					 (120 << PHY_S6G_PLL_FSM_CTRL_DATA_POS)
+					 | (0 << PHY_S6G_PLL_FSM_ENA_POS));
+	if (ret)
+		goto err;
+
+	/* commoncfg */
+	ret = vsc85xx_csr_ctrl_phy_write(phydev, PHY_MCB_TARGET,
+					 PHY_S6G_COMMON_CFG,
+					 (0 << PHY_S6G_SYS_RST_POS) |
+					 (0 << PHY_S6G_ENA_LANE_POS) |
+					 (0 << PHY_S6G_ENA_LOOP_POS) |
+					 (0 << PHY_S6G_QRATE_POS) |
+					 (3 << PHY_S6G_IF_MODE_POS));
+	if (ret)
+		goto err;
+
+	/* misccfg */
+	ret = vsc85xx_csr_ctrl_phy_write(phydev, PHY_MCB_TARGET,
+					 PHY_S6G_MISC_CFG, 1);
+	if (ret)
+		goto err;
+
+	/* gpcfg */
+	ret = vsc85xx_csr_ctrl_phy_write(phydev, PHY_MCB_TARGET,
+					 PHY_S6G_GPC_CFG, 768);
+	if (ret)
+		goto err;
+
+	phy_commit_mcb_s6g(phydev, PHY_S6G_DFT_CFG2, 0);
+
+	deadline = jiffies + msecs_to_jiffies(PROC_CMD_NCOMPLETED_TIMEOUT_MS);
+	do {
+		usleep_range(500, 1000);
+		phy_update_mcb_s6g(phydev, PHY_MCB_S6G_CFG,
+				   0); /* read 6G MCB into CSRs */
+		reg = vsc85xx_csr_ctrl_phy_read(phydev, PHY_MCB_TARGET,
+						PHY_S6G_PLL_STATUS);
+		if (reg == 0xffffffff) {
+			mutex_unlock(&phydev->mdio.bus->mdio_lock);
+			return -EIO;
+		}
+
+	} while (time_before(jiffies, deadline) && (reg & BIT(12)));
+
+	if (reg & BIT(12)) {
+		mutex_unlock(&phydev->mdio.bus->mdio_lock);
+		return -ETIMEDOUT;
+	}
+
+	/* misccfg */
+	ret = vsc85xx_csr_ctrl_phy_write(phydev, PHY_MCB_TARGET,
+					 PHY_S6G_MISC_CFG, 0);
+	if (ret)
+		goto err;
+
+	phy_commit_mcb_s6g(phydev, PHY_MCB_S6G_CFG, 0);
+
+	deadline = jiffies + msecs_to_jiffies(PROC_CMD_NCOMPLETED_TIMEOUT_MS);
+	do {
+		usleep_range(500, 1000);
+		phy_update_mcb_s6g(phydev, PHY_MCB_S6G_CFG,
+				   0); /* read 6G MCB into CSRs */
+		reg = vsc85xx_csr_ctrl_phy_read(phydev, PHY_MCB_TARGET,
+						PHY_S6G_IB_STATUS0);
+		if (reg == 0xffffffff) {
+			mutex_unlock(&phydev->mdio.bus->mdio_lock);
+			return -EIO;
+		}
+
+	} while (time_before(jiffies, deadline) && !(reg & BIT(8)));
+
+	if (!(reg & BIT(8))) {
+		mutex_unlock(&phydev->mdio.bus->mdio_lock);
+		return -ETIMEDOUT;
+	}
+
+	mutex_unlock(&phydev->mdio.bus->mdio_lock);
+
+	ret = phy_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
+
+	if (ret)
+		return ret;
+
+	ret = phy_modify(phydev, MSCC_PHY_EXT_PHY_CNTL_1, MEDIA_OP_MODE_MASK,
+			 MEDIA_OP_MODE_COPPER);
+
+	if (ret)
+		return ret;
+
+	ret = genphy_soft_reset(phydev);
+
+	if (ret)
+		return ret;
+
+	for (i = 0; i < vsc8531->nleds; i++) {
+		ret = vsc85xx_led_cntl_set(phydev, i, vsc8531->leds_mode[i]);
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+
+err:
+	mutex_unlock(&phydev->mdio.bus->mdio_lock);
+	return ret;
+}
+
 static int vsc85xx_ack_interrupt(struct phy_device *phydev)
 {
 	int rc = 0;
@@ -1791,6 +2209,31 @@ static int vsc85xx_read_status(struct phy_device *phydev)
 	return genphy_read_status(phydev);
 }
 
+static int vsc8514_probe(struct phy_device *phydev)
+{
+	struct vsc8531_private *vsc8531;
+	u32 default_mode[4] = {VSC8531_LINK_1000_ACTIVITY,
+	   VSC8531_LINK_100_ACTIVITY, VSC8531_LINK_ACTIVITY,
+	   VSC8531_DUPLEX_COLLISION};
+
+	vsc8531 = devm_kzalloc(&phydev->mdio.dev, sizeof(*vsc8531), GFP_KERNEL);
+	if (!vsc8531)
+		return -ENOMEM;
+
+	phydev->priv = vsc8531;
+
+	vsc8531->nleds = 4;
+	vsc8531->supp_led_modes = VSC85XX_SUPP_LED_MODES;
+	vsc8531->hw_stats = vsc85xx_hw_stats;
+	vsc8531->nstats = ARRAY_SIZE(vsc85xx_hw_stats);
+	vsc8531->stats = devm_kmalloc_array(&phydev->mdio.dev, vsc8531->nstats,
+					    sizeof(u64), GFP_KERNEL);
+	if (!vsc8531->stats)
+		return -ENOMEM;
+
+	return vsc85xx_dt_led_modes_get(phydev, default_mode);
+}
+
 static int vsc8574_probe(struct phy_device *phydev)
 {
 	struct vsc8531_private *vsc8531;
@@ -1879,10 +2322,33 @@ static int vsc85xx_probe(struct phy_device *phydev)
 /* Microsemi VSC85xx PHYs */
 static struct phy_driver vsc85xx_driver[] = {
 {
+	.phy_id		= PHY_ID_VSC8514,
+	.name		= "Microsemi GE VSC8514 SyncE",
+	.phy_id_mask	= 0xfffffff0,
+	.soft_reset	= &genphy_soft_reset,
+	.config_init    = &vsc8514_config_init,
+	.config_aneg    = &vsc85xx_config_aneg,
+	.read_status	= &vsc85xx_read_status,
+	.ack_interrupt  = &vsc85xx_ack_interrupt,
+	.config_intr    = &vsc85xx_config_intr,
+	.suspend	= &genphy_suspend,
+	.resume		= &genphy_resume,
+	.probe		= &vsc8514_probe,
+	.set_wol	= &vsc85xx_wol_set,
+	.get_wol	= &vsc85xx_wol_get,
+	.get_tunable	= &vsc85xx_get_tunable,
+	.set_tunable	= &vsc85xx_set_tunable,
+	.read_page      = &vsc85xx_phy_read_page,
+	.write_page     = &vsc85xx_phy_write_page,
+	.get_sset_count = &vsc85xx_get_sset_count,
+	.get_strings    = &vsc85xx_get_strings,
+	.get_stats      = &vsc85xx_get_stats,
+},
+{
 	.phy_id		= PHY_ID_VSC8530,
 	.name		= "Microsemi FE VSC8530",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= PHY_BASIC_FEATURES,
+	/* PHY_BASIC_FEATURES */
 	.soft_reset	= &genphy_soft_reset,
 	.config_init	= &vsc85xx_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
@@ -1907,7 +2373,7 @@ static struct phy_driver vsc85xx_driver[] = {
 	.phy_id		= PHY_ID_VSC8531,
 	.name		= "Microsemi VSC8531",
 	.phy_id_mask    = 0xfffffff0,
-	.features	= PHY_GBIT_FEATURES,
+	/* PHY_GBIT_FEATURES */
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc85xx_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
@@ -1932,7 +2398,7 @@ static struct phy_driver vsc85xx_driver[] = {
 	.phy_id		= PHY_ID_VSC8540,
 	.name		= "Microsemi FE VSC8540 SyncE",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= PHY_BASIC_FEATURES,
+	/* PHY_BASIC_FEATURES */
 	.soft_reset	= &genphy_soft_reset,
 	.config_init	= &vsc85xx_config_init,
 	.config_aneg	= &vsc85xx_config_aneg,
@@ -1957,7 +2423,7 @@ static struct phy_driver vsc85xx_driver[] = {
 	.phy_id		= PHY_ID_VSC8541,
 	.name		= "Microsemi VSC8541 SyncE",
 	.phy_id_mask    = 0xfffffff0,
-	.features	= PHY_GBIT_FEATURES,
+	/* PHY_GBIT_FEATURES */
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc85xx_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
@@ -1982,7 +2448,7 @@ static struct phy_driver vsc85xx_driver[] = {
 	.phy_id		= PHY_ID_VSC8574,
 	.name		= "Microsemi GE VSC8574 SyncE",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= PHY_GBIT_FEATURES,
+	/* PHY_GBIT_FEATURES */
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc8584_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
@@ -2008,7 +2474,7 @@ static struct phy_driver vsc85xx_driver[] = {
 	.phy_id		= PHY_ID_VSC8584,
 	.name		= "Microsemi GE VSC8584 SyncE",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= PHY_GBIT_FEATURES,
+	/* PHY_GBIT_FEATURES */
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc8584_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
@@ -2034,6 +2500,7 @@ static struct phy_driver vsc85xx_driver[] = {
 module_phy_driver(vsc85xx_driver);
 
 static struct mdio_device_id __maybe_unused vsc85xx_tbl[] = {
+	{ PHY_ID_VSC8514, 0xfffffff0, },
 	{ PHY_ID_VSC8530, 0xfffffff0, },
 	{ PHY_ID_VSC8531, 0xfffffff0, },
 	{ PHY_ID_VSC8540, 0xfffffff0, },