iwlagn: implement synchronous firmware load

The current firmware loading mechanism in
iwlwifi is very hard to follow, and thus
hard to maintain. To make it easier, make
the firmware loading synchronous.

For now, as a side effect, this removes a
number of retry possibilities we had. It
isn't typical for this to fail, but if it
does happen we restart from scratch which
this also makes easier to do should it be
necessary.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

1 files changed, 172 insertions, 68 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
index 5c30f6b19a7f..56dc7712aa70 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
@@ -161,8 +161,8 @@ static int iwlagn_load_section(struct iwl_priv *priv, const char *name,
 }
 
 static int iwlagn_load_given_ucode(struct iwl_priv *priv,
-		struct fw_desc *inst_image,
-		struct fw_desc *data_image)
+				   struct fw_desc *inst_image,
+				   struct fw_desc *data_image)
 {
 	int ret = 0;
 
@@ -175,33 +175,6 @@ static int iwlagn_load_given_ucode(struct iwl_priv *priv,
 				    IWLAGN_RTC_DATA_LOWER_BOUND);
 }
 
-int iwlagn_load_ucode(struct iwl_priv *priv)
-{
-	int ret = 0;
-
-	/* check whether init ucode should be loaded, or rather runtime ucode */
-	if (priv->ucode_init.len && (priv->ucode_type == UCODE_NONE)) {
-		IWL_DEBUG_INFO(priv, "Init ucode found. Loading init ucode...\n");
-		ret = iwlagn_load_given_ucode(priv,
-			&priv->ucode_init, &priv->ucode_init_data);
-		if (!ret) {
-			IWL_DEBUG_INFO(priv, "Init ucode load complete.\n");
-			priv->ucode_type = UCODE_INIT;
-		}
-	} else {
-		IWL_DEBUG_INFO(priv, "Init ucode not found, or already loaded. "
-			"Loading runtime ucode...\n");
-		ret = iwlagn_load_given_ucode(priv,
-			&priv->ucode_code, &priv->ucode_data);
-		if (!ret) {
-			IWL_DEBUG_INFO(priv, "Runtime ucode load complete.\n");
-			priv->ucode_type = UCODE_RT;
-		}
-	}
-
-	return ret;
-}
-
 /*
  *  Calibration
  */
@@ -297,33 +270,9 @@ void iwlagn_rx_calib_result(struct iwl_priv *priv,
 	iwl_calib_set(&priv->calib_results[index], pkt->u.raw, len);
 }
 
-void iwlagn_rx_calib_complete(struct iwl_priv *priv,
-			       struct iwl_rx_mem_buffer *rxb)
+static int iwlagn_init_alive_start(struct iwl_priv *priv)
 {
-	IWL_DEBUG_INFO(priv, "Init. calibration is completed, restarting fw.\n");
-	queue_work(priv->workqueue, &priv->restart);
-}
-
-void iwlagn_init_alive_start(struct iwl_priv *priv)
-{
-	int ret = 0;
-
-	/* initialize uCode was loaded... verify inst image.
-	 * This is a paranoid check, because we would not have gotten the
-	 * "initialize" alive if code weren't properly loaded.  */
-	if (iwl_verify_ucode(priv, &priv->ucode_init)) {
-		/* Runtime instruction load was bad;
-		 * take it all the way back down so we can try again */
-		IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n");
-		goto restart;
-	}
-
-	ret = iwlagn_alive_notify(priv);
-	if (ret) {
-		IWL_WARN(priv,
-			"Could not complete ALIVE transition: %d\n", ret);
-		goto restart;
-	}
+	int ret;
 
 	if (priv->cfg->bt_params &&
 	    priv->cfg->bt_params->advanced_bt_coexist) {
@@ -333,24 +282,25 @@ void iwlagn_init_alive_start(struct iwl_priv *priv)
 		 * no need to close the envlope since we are going
 		 * to load the runtime uCode later.
 		 */
-		iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
+		ret = iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
 			BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+		if (ret)
+			return ret;
 
 	}
-	iwlagn_send_calib_cfg(priv);
+
+	ret = iwlagn_send_calib_cfg(priv);
+	if (ret)
+		return ret;
 
 	/**
 	 * temperature offset calibration is only needed for runtime ucode,
 	 * so prepare the value now.
 	 */
 	if (priv->cfg->need_temp_offset_calib)
-		iwlagn_set_temperature_offset_calib(priv);
-
-	return;
+		return iwlagn_set_temperature_offset_calib(priv);
 
-restart:
-	/* real restart (first load init_ucode) */
-	queue_work(priv->workqueue, &priv->restart);
+	return 0;
 }
 
 static int iwlagn_send_wimax_coex(struct iwl_priv *priv)
@@ -413,19 +363,22 @@ void iwlagn_send_prio_tbl(struct iwl_priv *priv)
 		IWL_ERR(priv, "failed to send BT prio tbl command\n");
 }
 
-void iwlagn_send_bt_env(struct iwl_priv *priv, u8 action, u8 type)
+int iwlagn_send_bt_env(struct iwl_priv *priv, u8 action, u8 type)
 {
 	struct iwl_bt_coex_prot_env_cmd env_cmd;
+	int ret;
 
 	env_cmd.action = action;
 	env_cmd.type = type;
-	if (iwl_send_cmd_pdu(priv, REPLY_BT_COEX_PROT_ENV,
-			     sizeof(env_cmd), &env_cmd))
+	ret = iwl_send_cmd_pdu(priv, REPLY_BT_COEX_PROT_ENV,
+			       sizeof(env_cmd), &env_cmd);
+	if (ret)
 		IWL_ERR(priv, "failed to send BT env command\n");
+	return ret;
 }
 
 
-int iwlagn_alive_notify(struct iwl_priv *priv)
+static int iwlagn_alive_notify(struct iwl_priv *priv)
 {
 	const struct queue_to_fifo_ac *queue_to_fifo;
 	struct iwl_rxon_context *ctx;
@@ -604,7 +557,7 @@ static void iwl_print_mismatch_inst(struct iwl_priv *priv,
  * iwl_verify_ucode - determine which instruction image is in SRAM,
  *    and verify its contents
  */
-int iwl_verify_ucode(struct iwl_priv *priv, struct fw_desc *fw_desc)
+static int iwl_verify_ucode(struct iwl_priv *priv, struct fw_desc *fw_desc)
 {
 	if (!iwlcore_verify_inst_sparse(priv, fw_desc)) {
 		IWL_DEBUG_INFO(priv, "uCode is good in inst SRAM\n");
@@ -616,3 +569,154 @@ int iwl_verify_ucode(struct iwl_priv *priv, struct fw_desc *fw_desc)
 	iwl_print_mismatch_inst(priv, fw_desc);
 	return -EIO;
 }
+
+struct iwlagn_alive_data {
+	bool valid;
+	u8 subtype;
+};
+
+static void iwlagn_alive_fn(struct iwl_priv *priv,
+			    struct iwl_rx_packet *pkt,
+			    void *data)
+{
+	struct iwlagn_alive_data *alive_data = data;
+	struct iwl_alive_resp *palive;
+
+	palive = &pkt->u.alive_frame;
+
+	IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
+		       "0x%01X 0x%01X\n",
+		       palive->is_valid, palive->ver_type,
+		       palive->ver_subtype);
+
+	priv->device_pointers.error_event_table =
+		le32_to_cpu(palive->error_event_table_ptr);
+	priv->device_pointers.log_event_table =
+		le32_to_cpu(palive->log_event_table_ptr);
+
+	alive_data->subtype = palive->ver_subtype;
+	alive_data->valid = palive->is_valid == UCODE_VALID_OK;
+}
+
+#define UCODE_ALIVE_TIMEOUT	HZ
+#define UCODE_CALIB_TIMEOUT	(2*HZ)
+
+int iwlagn_load_ucode_wait_alive(struct iwl_priv *priv,
+				 struct fw_desc *inst_image,
+				 struct fw_desc *data_image,
+				 int subtype, int alternate_subtype)
+{
+	struct iwl_notification_wait alive_wait;
+	struct iwlagn_alive_data alive_data;
+	int ret;
+	enum iwlagn_ucode_subtype old_type;
+
+	ret = iwlagn_start_device(priv);
+	if (ret)
+		return ret;
+
+	iwlagn_init_notification_wait(priv, &alive_wait, REPLY_ALIVE,
+				      iwlagn_alive_fn, &alive_data);
+
+	old_type = priv->ucode_type;
+	priv->ucode_type = subtype;
+
+	ret = iwlagn_load_given_ucode(priv, inst_image, data_image);
+	if (ret) {
+		priv->ucode_type = old_type;
+		iwlagn_remove_notification(priv, &alive_wait);
+		return ret;
+	}
+
+	/* Remove all resets to allow NIC to operate */
+	iwl_write32(priv, CSR_RESET, 0);
+
+	/*
+	 * Some things may run in the background now, but we
+	 * just wait for the ALIVE notification here.
+	 */
+	ret = iwlagn_wait_notification(priv, &alive_wait, UCODE_ALIVE_TIMEOUT);
+	if (ret) {
+		priv->ucode_type = old_type;
+		return ret;
+	}
+
+	if (!alive_data.valid) {
+		IWL_ERR(priv, "Loaded ucode is not valid!\n");
+		priv->ucode_type = old_type;
+		return -EIO;
+	}
+
+	if (alive_data.subtype != subtype &&
+	    alive_data.subtype != alternate_subtype) {
+		IWL_ERR(priv,
+			"Loaded ucode is not expected type (got %d, expected %d)!\n",
+			alive_data.subtype, subtype);
+		priv->ucode_type = old_type;
+		return -EIO;
+	}
+
+	ret = iwl_verify_ucode(priv, inst_image);
+	if (ret) {
+		priv->ucode_type = old_type;
+		return ret;
+	}
+
+	/* delay a bit to give rfkill time to run */
+	msleep(5);
+
+	ret = iwlagn_alive_notify(priv);
+	if (ret) {
+		IWL_WARN(priv,
+			"Could not complete ALIVE transition: %d\n", ret);
+		priv->ucode_type = old_type;
+		return ret;
+	}
+
+	return 0;
+}
+
+int iwlagn_run_init_ucode(struct iwl_priv *priv)
+{
+	struct iwl_notification_wait calib_wait;
+	int ret;
+
+	lockdep_assert_held(&priv->mutex);
+
+	/* No init ucode required? Curious, but maybe ok */
+	if (!priv->ucode_init.len)
+		return 0;
+
+	if (priv->ucode_type != UCODE_SUBTYPE_NONE_LOADED)
+		return 0;
+
+	iwlagn_init_notification_wait(priv, &calib_wait,
+				      CALIBRATION_COMPLETE_NOTIFICATION,
+				      NULL, NULL);
+
+	/* Will also start the device */
+	ret = iwlagn_load_ucode_wait_alive(priv, &priv->ucode_init,
+					   &priv->ucode_init_data,
+					   UCODE_SUBTYPE_INIT, -1);
+	if (ret)
+		goto error;
+
+	ret = iwlagn_init_alive_start(priv);
+	if (ret)
+		goto error;
+
+	/*
+	 * Some things may run in the background now, but we
+	 * just wait for the calibration complete notification.
+	 */
+	ret = iwlagn_wait_notification(priv, &calib_wait, UCODE_CALIB_TIMEOUT);
+
+	goto out;
+
+ error:
+	iwlagn_remove_notification(priv, &calib_wait);
+ out:
+	/* Whatever happened, stop the device */
+	iwlagn_stop_device(priv);
+	return ret;
+}