iwlagn: reduce redundant parameter definitions

move paramater definitions to a device paramater structure only
leaving the device name, which antennas are used and what firmware
file to use in the iwl_cfg structure.  this will not completely
remove the redundancies but greatly reduce them for devices that
only vary by name or antennas.  the parameters that are more
likely to change within a given device family are left in iwl_cfg.
also separate bt param structure added to help reduce more.

Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

1 files changed, 52 insertions, 43 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index b7adcf87280d..95cbc55a7a65 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -232,7 +232,8 @@ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
 
 	ht_info->ht_supported = true;
 
-	if (priv->cfg->ht_greenfield_support)
+	if (priv->cfg->ht_params &&
+	    priv->cfg->ht_params->ht_greenfield_support)
 		ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
 	ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
 	max_bit_rate = MAX_BIT_RATE_20_MHZ;
@@ -247,11 +248,11 @@ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
 		ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
 
 	ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
-	if (priv->cfg->ampdu_factor)
-		ht_info->ampdu_factor = priv->cfg->ampdu_factor;
+	if (priv->cfg->bt_params && priv->cfg->bt_params->ampdu_factor)
+		ht_info->ampdu_factor = priv->cfg->bt_params->ampdu_factor;
 	ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
-	if (priv->cfg->ampdu_density)
-		ht_info->ampdu_density = priv->cfg->ampdu_density;
+	if (priv->cfg->bt_params && priv->cfg->bt_params->ampdu_density)
+		ht_info->ampdu_density = priv->cfg->bt_params->ampdu_density;
 
 	ht_info->mcs.rx_mask[0] = 0xFF;
 	if (rx_chains_num >= 2)
@@ -850,8 +851,10 @@ EXPORT_SYMBOL(iwl_set_rxon_ht);
  */
 static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
 {
-	if (priv->cfg->advanced_bt_coexist && (priv->bt_full_concurrent ||
-	    priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) {
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist &&
+	    (priv->bt_full_concurrent ||
+	     priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) {
 		/*
 		 * only use chain 'A' in bt high traffic load or
 		 * full concurrency mode
@@ -919,8 +922,10 @@ void iwl_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
 	else
 		active_chains = priv->hw_params.valid_rx_ant;
 
-	if (priv->cfg->advanced_bt_coexist && (priv->bt_full_concurrent ||
-	    priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) {
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist &&
+	    (priv->bt_full_concurrent ||
+	     priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) {
 		/*
 		 * only use chain 'A' in bt high traffic load or
 		 * full concurrency mode
@@ -1362,7 +1367,7 @@ int iwl_apm_init(struct iwl_priv *priv)
 	 * If not (unlikely), enable L0S, so there is at least some
 	 *    power savings, even without L1.
 	 */
-	if (priv->cfg->set_l0s) {
+	if (priv->cfg->base_params->set_l0s) {
 		lctl = iwl_pcie_link_ctl(priv);
 		if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
 					PCI_CFG_LINK_CTRL_VAL_L1_EN) {
@@ -1379,8 +1384,9 @@ int iwl_apm_init(struct iwl_priv *priv)
 	}
 
 	/* Configure analog phase-lock-loop before activating to D0A */
-	if (priv->cfg->pll_cfg_val)
-		iwl_set_bit(priv, CSR_ANA_PLL_CFG, priv->cfg->pll_cfg_val);
+	if (priv->cfg->base_params->pll_cfg_val)
+		iwl_set_bit(priv, CSR_ANA_PLL_CFG,
+			    priv->cfg->base_params->pll_cfg_val);
 
 	/*
 	 * Set "initialization complete" bit to move adapter from
@@ -1411,7 +1417,7 @@ int iwl_apm_init(struct iwl_priv *priv)
 	 * do not disable clocks.  This preserves any hardware bits already
 	 * set by default in "CLK_CTRL_REG" after reset.
 	 */
-	if (priv->cfg->use_bsm)
+	if (priv->cfg->base_params->use_bsm)
 		iwl_write_prph(priv, APMG_CLK_EN_REG,
 			APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT);
 	else
@@ -2054,7 +2060,8 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 		goto out_err;
 	}
 
-	if (priv->cfg->advanced_bt_coexist &&
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist &&
 	    vif->type == NL80211_IFTYPE_ADHOC) {
 		/*
 		 * pretend to have high BT traffic as long as we
@@ -2317,7 +2324,8 @@ int iwl_alloc_txq_mem(struct iwl_priv *priv)
 {
 	if (!priv->txq)
 		priv->txq = kzalloc(
-			sizeof(struct iwl_tx_queue) * priv->cfg->num_of_queues,
+			sizeof(struct iwl_tx_queue) *
+				priv->cfg->base_params->num_of_queues,
 			GFP_KERNEL);
 	if (!priv->txq) {
 		IWL_ERR(priv, "Not enough memory for txq\n");
@@ -2828,33 +2836,34 @@ static int iwl_check_stuck_queue(struct iwl_priv *priv, int cnt)
 	txq = &priv->txq[cnt];
 	q = &txq->q;
 	/* queue is empty, skip */
-	if (q->read_ptr != q->write_ptr) {
-		if (q->read_ptr == q->last_read_ptr) {
-			/* a queue has not been read from last time */
-			if (q->repeat_same_read_ptr > MAX_REPEAT) {
-				IWL_ERR(priv,
-					"queue %d stuck %d time. Fw reload.\n",
-					q->id, q->repeat_same_read_ptr);
-				q->repeat_same_read_ptr = 0;
-				iwl_force_reset(priv, IWL_FW_RESET, false);
-			} else {
-				q->repeat_same_read_ptr++;
-				IWL_DEBUG_RADIO(priv,
-						"queue %d, not read %d time\n",
-						q->id,
-						q->repeat_same_read_ptr);
-				if (!priv->cfg->advanced_bt_coexist) {
-					mod_timer(&priv->monitor_recover,
-						jiffies + msecs_to_jiffies(
-						IWL_ONE_HUNDRED_MSECS));
-					return 1;
-				}
-			}
-			return 0;
-		} else {
-			q->last_read_ptr = q->read_ptr;
+	if (q->read_ptr == q->write_ptr)
+		return 0;
+
+	if (q->read_ptr == q->last_read_ptr) {
+		/* a queue has not been read from last time */
+		if (q->repeat_same_read_ptr > MAX_REPEAT) {
+			IWL_ERR(priv,
+				"queue %d stuck %d time. Fw reload.\n",
+				q->id, q->repeat_same_read_ptr);
 			q->repeat_same_read_ptr = 0;
+			iwl_force_reset(priv, IWL_FW_RESET, false);
+		} else {
+			q->repeat_same_read_ptr++;
+			IWL_DEBUG_RADIO(priv,
+					"queue %d, not read %d time\n",
+					q->id,
+					q->repeat_same_read_ptr);
+			if (priv->cfg->bt_params &&
+			    !priv->cfg->bt_params->advanced_bt_coexist) {
+				mod_timer(&priv->monitor_recover,
+					jiffies + msecs_to_jiffies(
+					IWL_ONE_HUNDRED_MSECS));
+				return 1;
+			}
 		}
+	} else {
+		q->last_read_ptr = q->read_ptr;
+		q->repeat_same_read_ptr = 0;
 	}
 	return 0;
 }
@@ -2881,13 +2890,13 @@ void iwl_bg_monitor_recover(unsigned long data)
 				return;
 		}
 	}
-	if (priv->cfg->monitor_recover_period) {
+	if (priv->cfg->base_params->monitor_recover_period) {
 		/*
 		 * Reschedule the timer to occur in
-		 * priv->cfg->monitor_recover_period
+		 * priv->cfg->base_params->monitor_recover_period
 		 */
 		mod_timer(&priv->monitor_recover, jiffies + msecs_to_jiffies(
-			  priv->cfg->monitor_recover_period));
+			  priv->cfg->base_params->monitor_recover_period));
 	}
 }
 EXPORT_SYMBOL(iwl_bg_monitor_recover);