Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.

   2) Add fib_sync_mem to control the amount of dirty memory we allow to
      queue up between synchronize RCU calls, from David Ahern.

   3) Make flow classifier more lockless, from Vlad Buslov.

   4) Add PHY downshift support to aquantia driver, from Heiner
      Kallweit.

   5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
      contention on SLAB spinlocks in heavy RPC workloads.

   6) Partial GSO offload support in XFRM, from Boris Pismenny.

   7) Add fast link down support to ethtool, from Heiner Kallweit.

   8) Use siphash for IP ID generator, from Eric Dumazet.

   9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
      entries, from David Ahern.

  10) Move skb->xmit_more into a per-cpu variable, from Florian
      Westphal.

  11) Improve eBPF verifier speed and increase maximum program size,
      from Alexei Starovoitov.

  12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
      spinlocks. From Neil Brown.

  13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.

  14) Improve link partner cap detection in generic PHY code, from
      Heiner Kallweit.

  15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
      Maguire.

  16) Remove SKB list implementation assumptions in SCTP, your's truly.

  17) Various cleanups, optimizations, and simplifications in r8169
      driver. From Heiner Kallweit.

  18) Add memory accounting on TX and RX path of SCTP, from Xin Long.

  19) Switch PHY drivers over to use dynamic featue detection, from
      Heiner Kallweit.

  20) Support flow steering without masking in dpaa2-eth, from Ioana
      Ciocoi.

  21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
      Pirko.

  22) Increase the strict parsing of current and future netlink
      attributes, also export such policies to userspace. From Johannes
      Berg.

  23) Allow DSA tag drivers to be modular, from Andrew Lunn.

  24) Remove legacy DSA probing support, also from Andrew Lunn.

  25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
      Haabendal.

  26) Add a generic tracepoint for TX queue timeouts to ease debugging,
      from Cong Wang.

  27) More indirect call optimizations, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
  cxgb4: Fix error path in cxgb4_init_module
  net: phy: improve pause mode reporting in phy_print_status
  dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
  net: macb: Change interrupt and napi enable order in open
  net: ll_temac: Improve error message on error IRQ
  net/sched: remove block pointer from common offload structure
  net: ethernet: support of_get_mac_address new ERR_PTR error
  net: usb: smsc: fix warning reported by kbuild test robot
  staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
  net: dsa: support of_get_mac_address new ERR_PTR error
  net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
  vrf: sit mtu should not be updated when vrf netdev is the link
  net: dsa: Fix error cleanup path in dsa_init_module
  l2tp: Fix possible NULL pointer dereference
  taprio: add null check on sched_nest to avoid potential null pointer dereference
  net: mvpp2: cls: fix less than zero check on a u32 variable
  net_sched: sch_fq: handle non connected flows
  net_sched: sch_fq: do not assume EDT packets are ordered
  net: hns3: use devm_kcalloc when allocating desc_cb
  net: hns3: some cleanup for struct hns3_enet_ring
  ...

1 files changed, 56 insertions, 31 deletions

diff --git a/drivers/net/wireless/quantenna/qtnfmac/qlink.h b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
index 7798edcf7980..8a3c6344fa8e 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/qlink.h
+++ b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
@@ -6,7 +6,7 @@
 
 #include <linux/ieee80211.h>
 
-#define QLINK_PROTO_VER		13
+#define QLINK_PROTO_VER		15
 
 #define QLINK_MACID_RSVD		0xFF
 #define QLINK_VIFID_RSVD		0xFF
@@ -206,6 +206,8 @@ struct qlink_sta_info_state {
  * execution status (one of &enum qlink_cmd_result). Reply message
  * may also contain data payload specific to the command type.
  *
+ * @QLINK_CMD_SEND_FRAME: send specified frame over the air; firmware will
+ *	encapsulate 802.3 packet into 802.11 frame automatically.
  * @QLINK_CMD_BAND_INFO_GET: for the specified MAC and specified band, get
  *	the band's description including number of operational channels and
  *	info on each channel, HT/VHT capabilities, supported rates etc.
@@ -220,7 +222,7 @@ enum qlink_cmd_type {
 	QLINK_CMD_FW_INIT		= 0x0001,
 	QLINK_CMD_FW_DEINIT		= 0x0002,
 	QLINK_CMD_REGISTER_MGMT		= 0x0003,
-	QLINK_CMD_SEND_MGMT_FRAME	= 0x0004,
+	QLINK_CMD_SEND_FRAME		= 0x0004,
 	QLINK_CMD_MGMT_SET_APPIE	= 0x0005,
 	QLINK_CMD_PHY_PARAMS_GET	= 0x0011,
 	QLINK_CMD_PHY_PARAMS_SET	= 0x0012,
@@ -321,22 +323,26 @@ struct qlink_cmd_mgmt_frame_register {
 	u8 do_register;
 } __packed;
 
-enum qlink_mgmt_frame_tx_flags {
-	QLINK_MGMT_FRAME_TX_FLAG_NONE		= 0,
-	QLINK_MGMT_FRAME_TX_FLAG_OFFCHAN	= BIT(0),
-	QLINK_MGMT_FRAME_TX_FLAG_NO_CCK		= BIT(1),
-	QLINK_MGMT_FRAME_TX_FLAG_ACK_NOWAIT	= BIT(2),
+/**
+ * @QLINK_FRAME_TX_FLAG_8023: frame has a 802.3 header; if not set, frame
+ *	is a 802.11 encapsulated.
+ */
+enum qlink_frame_tx_flags {
+	QLINK_FRAME_TX_FLAG_OFFCHAN	= BIT(0),
+	QLINK_FRAME_TX_FLAG_NO_CCK	= BIT(1),
+	QLINK_FRAME_TX_FLAG_ACK_NOWAIT	= BIT(2),
+	QLINK_FRAME_TX_FLAG_8023	= BIT(3),
 };
 
 /**
- * struct qlink_cmd_mgmt_frame_tx - data for QLINK_CMD_SEND_MGMT_FRAME command
+ * struct qlink_cmd_frame_tx - data for QLINK_CMD_SEND_FRAME command
  *
  * @cookie: opaque request identifier.
  * @freq: Frequency to use for frame transmission.
- * @flags: Transmission flags, one of &enum qlink_mgmt_frame_tx_flags.
+ * @flags: Transmission flags, one of &enum qlink_frame_tx_flags.
  * @frame_data: frame to transmit.
  */
-struct qlink_cmd_mgmt_frame_tx {
+struct qlink_cmd_frame_tx {
 	struct qlink_cmd chdr;
 	__le32 cookie;
 	__le16 freq;
@@ -580,12 +586,22 @@ enum qlink_user_reg_hint_type {
  * @initiator: which entity sent the request, one of &enum qlink_reg_initiator.
  * @user_reg_hint_type: type of hint for QLINK_REGDOM_SET_BY_USER request, one
  *	of &enum qlink_user_reg_hint_type.
+ * @num_channels: number of &struct qlink_tlv_channel in a variable portion of a
+ *	payload.
+ * @slave_radar: whether slave device should enable radar detection.
+ * @dfs_region: one of &enum qlink_dfs_regions.
+ * @info: variable portion of regulatory notifier callback.
  */
 struct qlink_cmd_reg_notify {
 	struct qlink_cmd chdr;
 	u8 alpha2[2];
 	u8 initiator;
 	u8 user_reg_hint_type;
+	u8 num_channels;
+	u8 dfs_region;
+	u8 slave_radar;
+	u8 rsvd[1];
+	u8 info[0];
 } __packed;
 
 /**
@@ -765,6 +781,18 @@ struct qlink_resp {
 } __packed;
 
 /**
+ * enum qlink_dfs_regions - regulatory DFS regions
+ *
+ * Corresponds to &enum nl80211_dfs_regions.
+ */
+enum qlink_dfs_regions {
+	QLINK_DFS_UNSET	= 0,
+	QLINK_DFS_FCC	= 1,
+	QLINK_DFS_ETSI	= 2,
+	QLINK_DFS_JP	= 3,
+};
+
+/**
  * struct qlink_resp_get_mac_info - response for QLINK_CMD_MAC_INFO command
  *
  * Data describing specific physical device providing wireless MAC
@@ -779,6 +807,10 @@ struct qlink_resp {
  * @bands_cap: wireless bands WMAC can operate in, bitmap of &enum qlink_band.
  * @max_ap_assoc_sta: Maximum number of associations supported by WMAC.
  * @radar_detect_widths: bitmask of channels BW for which WMAC can detect radar.
+ * @alpha2: country code ID firmware is configured to.
+ * @n_reg_rules: number of regulatory rules TLVs in variable portion of the
+ *	message.
+ * @dfs_region: regulatory DFS region, one of &enum qlink_dfs_regions.
  * @var_info: variable-length WMAC info data.
  */
 struct qlink_resp_get_mac_info {
@@ -792,23 +824,14 @@ struct qlink_resp_get_mac_info {
 	__le16 radar_detect_widths;
 	__le32 max_acl_mac_addrs;
 	u8 bands_cap;
+	u8 alpha2[2];
+	u8 n_reg_rules;
+	u8 dfs_region;
 	u8 rsvd[1];
 	u8 var_info[0];
 } __packed;
 
 /**
- * enum qlink_dfs_regions - regulatory DFS regions
- *
- * Corresponds to &enum nl80211_dfs_regions.
- */
-enum qlink_dfs_regions {
-	QLINK_DFS_UNSET	= 0,
-	QLINK_DFS_FCC	= 1,
-	QLINK_DFS_ETSI	= 2,
-	QLINK_DFS_JP	= 3,
-};
-
-/**
  * struct qlink_resp_get_hw_info - response for QLINK_CMD_GET_HW_INFO command
  *
  * Description of wireless hardware capabilities and features.
@@ -820,11 +843,7 @@ enum qlink_dfs_regions {
  * @mac_bitmap: Bitmap of MAC IDs that are active and can be used in firmware.
  * @total_tx_chains: total number of transmit chains used by device.
  * @total_rx_chains: total number of receive chains.
- * @alpha2: country code ID firmware is configured to.
- * @n_reg_rules: number of regulatory rules TLVs in variable portion of the
- *	message.
- * @dfs_region: regulatory DFS region, one of @enum qlink_dfs_region.
- * @info: variable-length HW info, can contain QTN_TLV_ID_REG_RULE.
+ * @info: variable-length HW info.
  */
 struct qlink_resp_get_hw_info {
 	struct qlink_resp rhdr;
@@ -838,9 +857,6 @@ struct qlink_resp_get_hw_info {
 	u8 mac_bitmap;
 	u8 total_tx_chain;
 	u8 total_rx_chain;
-	u8 alpha2[2];
-	u8 n_reg_rules;
-	u8 dfs_region;
 	u8 info[0];
 } __packed;
 
@@ -1148,6 +1164,13 @@ struct qlink_event_external_auth {
  *	carried by QTN_TLV_ID_STA_STATS_MAP.
  * @QTN_TLV_ID_MAX_SCAN_SSIDS: maximum number of SSIDs the device can scan
  *	for in any given scan.
+ * @QTN_TLV_ID_SCAN_DWELL_ACTIVE: time spent on a single channel for an active
+ *	scan.
+ * @QTN_TLV_ID_SCAN_DWELL_PASSIVE: time spent on a single channel for a passive
+ *	scan.
+ * @QTN_TLV_ID_SCAN_SAMPLE_DURATION: total duration of sampling a single channel
+ *	during a scan including off-channel dwell time and operating channel
+ *	time.
  */
 enum qlink_tlv_id {
 	QTN_TLV_ID_FRAG_THRESH		= 0x0201,
@@ -1180,7 +1203,9 @@ enum qlink_tlv_id {
 	QTN_TLV_ID_WOWLAN_CAPAB		= 0x0410,
 	QTN_TLV_ID_WOWLAN_PATTERN	= 0x0411,
 	QTN_TLV_ID_SCAN_FLUSH		= 0x0412,
-	QTN_TLV_ID_SCAN_DWELL		= 0x0413,
+	QTN_TLV_ID_SCAN_DWELL_ACTIVE	= 0x0413,
+	QTN_TLV_ID_SCAN_DWELL_PASSIVE	= 0x0416,
+	QTN_TLV_ID_SCAN_SAMPLE_DURATION	= 0x0417,
 };
 
 struct qlink_tlv_hdr {