Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Some highlights from this development cycle:

   1) Big refactoring of ipv6 route and neigh handling to support
      nexthop objects configurable as units from userspace. From David
      Ahern.

   2) Convert explored_states in BPF verifier into a hash table,
      significantly decreased state held for programs with bpf2bpf
      calls, from Alexei Starovoitov.

   3) Implement bpf_send_signal() helper, from Yonghong Song.

   4) Various classifier enhancements to mvpp2 driver, from Maxime
      Chevallier.

   5) Add aRFS support to hns3 driver, from Jian Shen.

   6) Fix use after free in inet frags by allocating fqdirs dynamically
      and reworking how rhashtable dismantle occurs, from Eric Dumazet.

   7) Add act_ctinfo packet classifier action, from Kevin
      Darbyshire-Bryant.

   8) Add TFO key backup infrastructure, from Jason Baron.

   9) Remove several old and unused ISDN drivers, from Arnd Bergmann.

  10) Add devlink notifications for flash update status to mlxsw driver,
      from Jiri Pirko.

  11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.

  12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.

  13) Various enhancements to ipv6 flow label handling, from Eric
      Dumazet and Willem de Bruijn.

  14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
      der Merwe, and others.

  15) Various improvements to axienet driver including converting it to
      phylink, from Robert Hancock.

  16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.

  17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
      Radulescu.

  18) Add devlink health reporting to mlx5, from Moshe Shemesh.

  19) Convert stmmac over to phylink, from Jose Abreu.

  20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
      Shalom Toledo.

  21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.

  22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.

  23) Track spill/fill of constants in BPF verifier, from Alexei
      Starovoitov.

  24) Support bounded loops in BPF, from Alexei Starovoitov.

  25) Various page_pool API fixes and improvements, from Jesper Dangaard
      Brouer.

  26) Just like ipv4, support ref-countless ipv6 route handling. From
      Wei Wang.

  27) Support VLAN offloading in aquantia driver, from Igor Russkikh.

  28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.

  29) Add flower GRE encap/decap support to nfp driver, from Pieter
      Jansen van Vuuren.

  30) Protect against stack overflow when using act_mirred, from John
      Hurley.

  31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.

  32) Use page_pool API in netsec driver, Ilias Apalodimas.

  33) Add Google gve network driver, from Catherine Sullivan.

  34) More indirect call avoidance, from Paolo Abeni.

  35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.

  36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.

  37) Add MPLS manipulation actions to TC, from John Hurley.

  38) Add sending a packet to connection tracking from TC actions, and
      then allow flower classifier matching on conntrack state. From
      Paul Blakey.

  39) Netfilter hw offload support, from Pablo Neira Ayuso"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
  net/mlx5e: Return in default case statement in tx_post_resync_params
  mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
  net: dsa: add support for BRIDGE_MROUTER attribute
  pkt_sched: Include const.h
  net: netsec: remove static declaration for netsec_set_tx_de()
  net: netsec: remove superfluous if statement
  netfilter: nf_tables: add hardware offload support
  net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
  net: flow_offload: add flow_block_cb_is_busy() and use it
  net: sched: remove tcf block API
  drivers: net: use flow block API
  net: sched: use flow block API
  net: flow_offload: add flow_block_cb_{priv, incref, decref}()
  net: flow_offload: add list handling functions
  net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
  net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
  net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
  net: flow_offload: add flow_block_cb_setup_simple()
  net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
  net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
  ...

1 files changed, 197 insertions, 0 deletions

diff --git a/drivers/staging/isdn/hysdn/hysdn_sched.c b/drivers/staging/isdn/hysdn/hysdn_sched.c
new file mode 100644
index 000000000000..31d7c1415543
--- /dev/null
+++ b/drivers/staging/isdn/hysdn/hysdn_sched.c
@@ -0,0 +1,197 @@
+/* $Id: hysdn_sched.c,v 1.5.6.4 2001/11/06 21:58:19 kai Exp $
+ *
+ * Linux driver for HYSDN cards
+ * scheduler routines for handling exchange card <-> pc.
+ *
+ * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
+ * Copyright 1999 by Werner Cornelius (werner@titro.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#include <linux/signal.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include "hysdn_defs.h"
+
+/*****************************************************************************/
+/* hysdn_sched_rx is called from the cards handler to announce new data is   */
+/* available from the card. The routine has to handle the data and return    */
+/* with a nonzero code if the data could be worked (or even thrown away), if */
+/* no room to buffer the data is available a zero return tells the card      */
+/* to keep the data until later.                                             */
+/*****************************************************************************/
+int
+hysdn_sched_rx(hysdn_card *card, unsigned char *buf, unsigned short len,
+	       unsigned short chan)
+{
+
+	switch (chan) {
+	case CHAN_NDIS_DATA:
+		if (hynet_enable & (1 << card->myid)) {
+			/* give packet to network handler */
+			hysdn_rx_netpkt(card, buf, len);
+		}
+		break;
+
+	case CHAN_ERRLOG:
+		hysdn_card_errlog(card, (tErrLogEntry *) buf, len);
+		if (card->err_log_state == ERRLOG_STATE_ON)
+			card->err_log_state = ERRLOG_STATE_START;	/* start new fetch */
+		break;
+#ifdef CONFIG_HYSDN_CAPI
+	case CHAN_CAPI:
+/* give packet to CAPI handler */
+		if (hycapi_enable & (1 << card->myid)) {
+			hycapi_rx_capipkt(card, buf, len);
+		}
+		break;
+#endif /* CONFIG_HYSDN_CAPI */
+	default:
+		printk(KERN_INFO "irq message channel %d len %d unhandled \n", chan, len);
+		break;
+
+	}			/* switch rx channel */
+
+	return (1);		/* always handled */
+}				/* hysdn_sched_rx */
+
+/*****************************************************************************/
+/* hysdn_sched_tx is called from the cards handler to announce that there is */
+/* room in the tx-buffer to the card and data may be sent if needed.         */
+/* If the routine wants to send data it must fill buf, len and chan with the */
+/* appropriate data and return a nonzero value. With a zero return no new    */
+/* data to send is assumed. maxlen specifies the buffer size available for   */
+/* sending.                                                                  */
+/*****************************************************************************/
+int
+hysdn_sched_tx(hysdn_card *card, unsigned char *buf,
+	       unsigned short volatile *len, unsigned short volatile *chan,
+	       unsigned short maxlen)
+{
+	struct sk_buff *skb;
+
+	if (card->net_tx_busy) {
+		card->net_tx_busy = 0;	/* reset flag */
+		hysdn_tx_netack(card);	/* acknowledge packet send */
+	}			/* a network packet has completely been transferred */
+	/* first of all async requests are handled */
+	if (card->async_busy) {
+		if (card->async_len <= maxlen) {
+			memcpy(buf, card->async_data, card->async_len);
+			*len = card->async_len;
+			*chan = card->async_channel;
+			card->async_busy = 0;	/* reset request */
+			return (1);
+		}
+		card->async_busy = 0;	/* in case of length error */
+	}			/* async request */
+	if ((card->err_log_state == ERRLOG_STATE_START) &&
+	    (maxlen >= ERRLOG_CMD_REQ_SIZE)) {
+		strcpy(buf, ERRLOG_CMD_REQ);	/* copy the command */
+		*len = ERRLOG_CMD_REQ_SIZE;	/* buffer length */
+		*chan = CHAN_ERRLOG;	/* and channel */
+		card->err_log_state = ERRLOG_STATE_ON;	/* new state is on */
+		return (1);	/* tell that data should be send */
+	}			/* error log start and able to send */
+	if ((card->err_log_state == ERRLOG_STATE_STOP) &&
+	    (maxlen >= ERRLOG_CMD_STOP_SIZE)) {
+		strcpy(buf, ERRLOG_CMD_STOP);	/* copy the command */
+		*len = ERRLOG_CMD_STOP_SIZE;	/* buffer length */
+		*chan = CHAN_ERRLOG;	/* and channel */
+		card->err_log_state = ERRLOG_STATE_OFF;		/* new state is off */
+		return (1);	/* tell that data should be send */
+	}			/* error log start and able to send */
+	/* now handle network interface packets */
+	if ((hynet_enable & (1 << card->myid)) &&
+	    (skb = hysdn_tx_netget(card)) != NULL)
+	{
+		if (skb->len <= maxlen) {
+			/* copy the packet to the buffer */
+			skb_copy_from_linear_data(skb, buf, skb->len);
+			*len = skb->len;
+			*chan = CHAN_NDIS_DATA;
+			card->net_tx_busy = 1;	/* we are busy sending network data */
+			return (1);	/* go and send the data */
+		} else
+			hysdn_tx_netack(card);	/* aknowledge packet -> throw away */
+	}			/* send a network packet if available */
+#ifdef CONFIG_HYSDN_CAPI
+	if (((hycapi_enable & (1 << card->myid))) &&
+	    ((skb = hycapi_tx_capiget(card)) != NULL))
+	{
+		if (skb->len <= maxlen) {
+			skb_copy_from_linear_data(skb, buf, skb->len);
+			*len = skb->len;
+			*chan = CHAN_CAPI;
+			hycapi_tx_capiack(card);
+			return (1);	/* go and send the data */
+		}
+	}
+#endif /* CONFIG_HYSDN_CAPI */
+	return (0);		/* nothing to send */
+}				/* hysdn_sched_tx */
+
+
+/*****************************************************************************/
+/* send one config line to the card and return 0 if successful, otherwise a */
+/* negative error code.                                                      */
+/* The function works with timeouts perhaps not giving the greatest speed    */
+/* sending the line, but this should be meaningless because only some lines  */
+/* are to be sent and this happens very seldom.                              */
+/*****************************************************************************/
+int
+hysdn_tx_cfgline(hysdn_card *card, unsigned char *line, unsigned short chan)
+{
+	int cnt = 50;		/* timeout intervalls */
+	unsigned long flags;
+
+	if (card->debug_flags & LOG_SCHED_ASYN)
+		hysdn_addlog(card, "async tx-cfg chan=%d len=%d", chan, strlen(line) + 1);
+
+	while (card->async_busy) {
+
+		if (card->debug_flags & LOG_SCHED_ASYN)
+			hysdn_addlog(card, "async tx-cfg delayed");
+
+		msleep_interruptible(20);		/* Timeout 20ms */
+		if (!--cnt)
+			return (-ERR_ASYNC_TIME);	/* timed out */
+	}			/* wait for buffer to become free */
+
+	spin_lock_irqsave(&card->hysdn_lock, flags);
+	strcpy(card->async_data, line);
+	card->async_len = strlen(line) + 1;
+	card->async_channel = chan;
+	card->async_busy = 1;	/* request transfer */
+
+	/* now queue the task */
+	schedule_work(&card->irq_queue);
+	spin_unlock_irqrestore(&card->hysdn_lock, flags);
+
+	if (card->debug_flags & LOG_SCHED_ASYN)
+		hysdn_addlog(card, "async tx-cfg data queued");
+
+	cnt++;			/* short delay */
+
+	while (card->async_busy) {
+
+		if (card->debug_flags & LOG_SCHED_ASYN)
+			hysdn_addlog(card, "async tx-cfg waiting for tx-ready");
+
+		msleep_interruptible(20);		/* Timeout 20ms */
+		if (!--cnt)
+			return (-ERR_ASYNC_TIME);	/* timed out */
+	}			/* wait for buffer to become free again */
+
+	if (card->debug_flags & LOG_SCHED_ASYN)
+		hysdn_addlog(card, "async tx-cfg data send");
+
+	return (0);		/* line send correctly */
+}				/* hysdn_tx_cfgline */