Staging: rtl8812ae: Add Realtek 8821 PCI WIFI driver

This comes directly from the Realtek tarball, filename:
	wifi_driver_8821ae_0018.1129.2013.tar.gz

I mushed the three modules (btcoexist, rtlwifi and rtl8821ae) together
into one, in order to make it all build as one stand-alone module.
After the btcoexist driver gets merged upstream, I'll pull it out of
here, and will continue to work on removing this version of rtlwifi in
order to use the in-kernel one.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 227 insertions, 0 deletions

diff --git a/drivers/staging/rtl8821ae/debug.h b/drivers/staging/rtl8821ae/debug.h
new file mode 100644
index 000000000000..5eb6251b89da
--- /dev/null
+++ b/drivers/staging/rtl8821ae/debug.h
@@ -0,0 +1,227 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * Tmis program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * Tmis program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * tmis program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * Tme full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_DEBUG_H__
+#define __RTL_DEBUG_H__
+
+/*--------------------------------------------------------------
+			Debug level
+--------------------------------------------------------------*/
+/*
+ *Fatal bug.
+ *For example, Tx/Rx/IO locked up,
+ *memory access violation,
+ *resource allocation failed,
+ *unexpected HW behavior, HW BUG
+ *and so on.
+ */
+#define DBG_EMERG			0
+
+/*
+ *Abnormal, rare, or unexpeted cases.
+ *For example, Packet/IO Ctl canceled,
+ *device suprisely unremoved and so on.
+ */
+#define	DBG_WARNING			2
+
+/*
+ *Normal case driver developer should
+ *open, we can see link status like
+ *assoc/AddBA/DHCP/adapter start and
+ *so on basic and useful infromations.
+ */
+#define DBG_DMESG			3
+
+/*
+ *Normal case with useful information
+ *about current SW or HW state.
+ *For example, Tx/Rx descriptor to fill,
+ *Tx/Rx descriptor completed status,
+ *SW protocol state change, dynamic
+ *mechanism state change and so on.
+ */
+#define DBG_LOUD			4
+
+/*
+ *Normal case with detail execution
+ *flow or information.
+ */
+#define	DBG_TRACE			5
+
+/*--------------------------------------------------------------
+		Define the rt_trace components
+--------------------------------------------------------------*/
+#define COMP_ERR			BIT(0)
+#define COMP_FW				BIT(1)
+#define COMP_INIT			BIT(2)	/*For init/deinit */
+#define COMP_RECV			BIT(3)	/*For Rx. */
+#define COMP_SEND			BIT(4)	/*For Tx. */
+#define COMP_MLME			BIT(5)	/*For MLME. */
+#define COMP_SCAN			BIT(6)	/*For Scan. */
+#define COMP_INTR			BIT(7)	/*For interrupt Related. */
+#define COMP_LED			BIT(8)	/*For LED. */
+#define COMP_SEC			BIT(9)	/*For sec. */
+#define COMP_BEACON			BIT(10)	/*For beacon. */
+#define COMP_RATE			BIT(11)	/*For rate. */
+#define COMP_RXDESC			BIT(12)	/*For rx desc. */
+#define COMP_DIG			BIT(13)	/*For DIG */
+#define COMP_TXAGC			BIT(14)	/*For Tx power */
+#define COMP_HIPWR			BIT(15)	/*For High Power Mechanism */
+#define COMP_POWER			BIT(16)	/*For lps/ips/aspm. */
+#define COMP_POWER_TRACKING	BIT(17)	/*For TX POWER TRACKING */
+#define COMP_BB_POWERSAVING	BIT(18)
+#define COMP_SWAS			BIT(19)	/*For SW Antenna Switch */
+#define COMP_RF				BIT(20)	/*For RF. */
+#define COMP_TURBO			BIT(21)	/*For EDCA TURBO. */
+#define COMP_RATR			BIT(22)
+#define COMP_CMD			BIT(23)
+#define COMP_EFUSE			BIT(24)
+#define COMP_QOS			BIT(25)
+#define COMP_MAC80211		BIT(26)
+#define COMP_REGD			BIT(27)
+#define COMP_CHAN			BIT(28)
+#define COMP_EASY_CONCURRENT 		BIT(29)
+#define COMP_BT_COEXIST			BIT(30)
+#define COMP_IQK			BIT(31)
+
+/*--------------------------------------------------------------
+		Define the rt_print components
+--------------------------------------------------------------*/
+/* Define EEPROM and EFUSE  check module bit*/
+#define EEPROM_W			BIT(0)
+#define EFUSE_PG			BIT(1)
+#define EFUSE_READ_ALL		BIT(2)
+
+/* Define init check for module bit*/
+#define	INIT_EEPROM			BIT(0)
+#define	INIT_TxPower		BIT(1)
+#define	INIT_IQK			BIT(2)
+#define	INIT_RF				BIT(3)
+
+/* Define PHY-BB/RF/MAC check module bit */
+#define	PHY_BBR				BIT(0)
+#define	PHY_BBW				BIT(1)
+#define	PHY_RFR				BIT(2)
+#define	PHY_RFW				BIT(3)
+#define	PHY_MACR			BIT(4)
+#define	PHY_MACW			BIT(5)
+#define	PHY_ALLR			BIT(6)
+#define	PHY_ALLW			BIT(7)
+#define	PHY_TXPWR			BIT(8)
+#define	PHY_PWRDIFF			BIT(9)
+
+/* Define Dynamic Mechanism check module bit --> FDM */
+#define WA_IOT				BIT(0)
+#define DM_PWDB				BIT(1)
+#define DM_MONITOR			BIT(2)
+#define DM_DIG				BIT(3)
+#define DM_EDCA_TURBO		BIT(4)
+
+enum dbgp_flag_e {
+	FQOS = 0,
+	FTX = 1,
+	FRX = 2,
+	FSEC = 3,
+	FMGNT = 4,
+	FMLME = 5,
+	FRESOURCE = 6,
+	FBEACON = 7,
+	FISR = 8,
+	FPHY = 9,
+	FMP = 10,
+	FEEPROM = 11,
+	FPWR = 12,
+	FDM = 13,
+	FDBGCtrl = 14,
+	FC2H = 15,
+	FBT = 16,
+	FINIT = 17,
+	FIOCTL = 18,
+	DBGP_TYPE_MAX
+};
+
+#define RT_ASSERT(_exp,fmt)				\
+	do { \
+		if(!(_exp))	{			\
+			printk(KERN_DEBUG "%s:%s(): ", KBUILD_MODNAME, \
+			__func__);	\
+			printk fmt;			\
+		} \
+	} while(0);
+
+#define	RT_DISP(dbgtype, dbgflag, printstr)
+
+#define RT_TRACE(comp, level, fmt)\
+	do { \
+		if(unlikely(((comp) & rtlpriv->dbg.global_debugcomponents) && \
+			((level) <= rtlpriv->dbg.global_debuglevel))) {\
+			printk(KERN_DEBUG "%s-%d:%s():<%lx-%x> ", \
+			KBUILD_MODNAME, \
+			rtlpriv->rtlhal.interfaceindex, __func__, \
+			in_interrupt(), in_atomic());	\
+			printk fmt; 			\
+		}\
+	} while(0);
+
+#define RTPRINT(rtlpriv, dbgtype, dbgflag, printstr)	\
+	do {						\
+		if (unlikely(rtlpriv->dbg.dbgp_type[dbgtype] & dbgflag)) { \
+			printk(KERN_DEBUG "%s: ", KBUILD_MODNAME);	\
+			printk printstr;		\
+		}					\
+	} while(0);
+
+#define RT_PRINT_DATA(rtlpriv, _comp, _level, _titlestring, _hexdata, \
+		_hexdatalen) \
+	do {\
+		if(unlikely(((_comp) & rtlpriv->dbg.global_debugcomponents ) &&\
+			(_level <= rtlpriv->dbg.global_debuglevel )))	{ \
+			int __i;					\
+			u8*	ptr = (u8*)_hexdata;			\
+			printk(KERN_DEBUG "%s: ", KBUILD_MODNAME);	\
+			printk(KERN_DEBUG "In process \"%s\" (pid %i):", \
+					current->comm, 	\
+					current->pid); \
+			printk(_titlestring);		\
+			for( __i=0; __i<(int)_hexdatalen; __i++ ) {	\
+				printk("%02X%s", ptr[__i], (((__i + 1) % 4) \
+							== 0)?"  ":" ");\
+				if (((__i + 1) % 16) == 0)	\
+					printk("\n");	\
+			}				\
+			printk(KERN_DEBUG "\n");			\
+		} \
+	} while(0);
+
+void rtl_dbgp_flag_init(struct ieee80211_hw *hw);
+void rtl_proc_add_one(struct ieee80211_hw *hw);
+void rtl_proc_remove_one(struct ieee80211_hw *hw);
+void rtl_proc_add_topdir(void);
+void rtl_proc_remove_topdir(void);
+#endif