Merge tag 'for-v3.9' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "Four new drivers:

   - goldfish_battery:

     This is Android Emulator battery driver.  Originally from Google,
     but Intel folks reshaped it for mainline

   - pm2301_charger:

     A new driver for ST-Ericsson 2301 Power Management chip, uses
     AB8500 battery management core

   - qnap-poweroff:

     The driver adds poweroff functionality for QNAP NAS boxes

   - restart-poweroff:

     A generic driver that implements 'power off by restarting'.  The
     actual poweroff functionality is implemented through a bootloader,
     so Linux' task is just to restart the box.  The driver is useful on
     Buffalo Linkstation LS-XHL and LS-CHLv2 boards.  Andrew Lunn worked
     on submitting the driver (as well as qnap-poweroff above).

  Additionally:

   - A lot of fixes for ab8500 drivers.  This is a part of efforts of
     syncing internal ST-Ericsson development tree with the mainline.
     Lee Jones @ Linaro worked on compilation and reshaping these
     series.

   - New health properties for the power supplies: "Watchdog timer
     expire" and "Safety timer expire"

   - As usual, a bunch of fixes/cleanups here and there"

* tag 'for-v3.9' of git://git.infradead.org/battery-2.6: (81 commits)
  bq2415x_charger: Add support for offline and 100mA mode
  generic-adc-battery: Fix forever loop in gab_remove()
  goldfish_battery: Add missing GENERIC_HARDIRQS dependency
  da9030_battery: Include notifier.h
  bq27x00_battery: Fix reporting battery temperature
  power/reset: Remove newly introduced __dev* annotations
  lp8727_charger: Small cleanup in naming
  ab8500_btemp: Demote initcall sequence
  ds2782_battery: Add power_supply_changed() calls for proper uevent support
  power: Add battery driver for goldfish emulator
  u8500-charger: Delay for USB enumeration
  ab8500-bm: Remove individual [charger|btemp|fg|chargalg] pdata structures
  ab8500-charger: Do not touch VBUSOVV bits
  ab8500-fg: Use correct battery charge full design
  pm2301: LPN mode control support
  pm2301: Enable vbat low monitoring
  ab8500-bm: Flush all work queues before suspending
  ab8500-fg: Go to INIT_RECOVERY when charger removed
  ab8500-charger: Add support for autopower on AB8505 and AB9540
  abx500-chargalg: Add new sysfs interface to get current charge status
  ...

Fix up fairly straightforward conflicts in the ab8500 driver.  But since
it seems to be ARM-specific, I can't even compile-test the result..

1 files changed, 10 insertions, 5 deletions

diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index e53dcfeaee69..80e3b8683a84 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -131,7 +131,7 @@ struct abx500_maxim_parameters {
  * @nominal_voltage:		Nominal voltage of the battery in mV
  * @termination_vol:		max voltage upto which battery can be charged
  * @termination_curr		battery charging termination current in mA
- * @recharge_vol		battery voltage limit that will trigger a new
+ * @recharge_cap		battery capacity limit that will trigger a new
  *				full charging cycle in the case where maintenan-
  *				-ce charging has been disabled
  * @normal_cur_lvl:		charger current in normal state in mA
@@ -160,7 +160,7 @@ struct abx500_battery_type {
 	int nominal_voltage;
 	int termination_vol;
 	int termination_curr;
-	int recharge_vol;
+	int recharge_cap;
 	int normal_cur_lvl;
 	int normal_vol_lvl;
 	int maint_a_cur_lvl;
@@ -224,6 +224,7 @@ struct abx500_bm_charger_parameters {
  * @bkup_bat_v		voltage which we charge the backup battery with
  * @bkup_bat_i		current which we charge the backup battery with
  * @no_maintenance	indicates that maintenance charging is disabled
+ * @capacity_scaling    indicates whether capacity scaling is to be used
  * @abx500_adc_therm	placement of thermistor, batctrl or battemp adc
  * @chg_unknown_bat	flag to enable charging of unknown batteries
  * @enable_overshoot	flag to enable VBAT overshoot control
@@ -253,7 +254,11 @@ struct abx500_bm_data {
 	int usb_safety_tmr_h;
 	int bkup_bat_v;
 	int bkup_bat_i;
+	bool autopower_cfg;
+	bool ac_enabled;
+	bool usb_enabled;
 	bool no_maintenance;
+	bool capacity_scaling;
 	bool chg_unknown_bat;
 	bool enable_overshoot;
 	bool auto_trig;
@@ -277,9 +282,9 @@ enum {
 	NTC_INTERNAL,
 };
 
-int bmdevs_of_probe(struct device *dev,
-		struct device_node *np,
-		struct abx500_bm_data **battery);
+int ab8500_bm_of_probe(struct device *dev,
+		       struct device_node *np,
+		       struct abx500_bm_data *bm);
 
 int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
 	u8 value);