Merge tag 'mac80211-next-for-davem-2016-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Among various cleanups and improvements, we have the following:
 * client FILS authentication support in mac80211 (Jouni)
 * AP/VLAN multicast improvements (Michael Braun)
 * config/advertising support for differing beacon intervals on
   multiple virtual interfaces (Purushottam Kushwaha, myself)
 * deprecate the old WDS mode for cfg80211-based drivers, the
   mode is hardly usable since it doesn't support any "modern"
   features like WPA encryption (2003), HT (2009) or VHT (2014),
   I'm not even sure WEP (introduced in 1997) could be done.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 134 insertions, 39 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index fe78f02a242e..c575583b50fb 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -772,6 +772,30 @@ struct cfg80211_csa_settings {
 };
 
 /**
+ * struct iface_combination_params - input parameters for interface combinations
+ *
+ * Used to pass interface combination parameters
+ *
+ * @num_different_channels: the number of different channels we want
+ *	to use for verification
+ * @radar_detect: a bitmap where each bit corresponds to a channel
+ *	width where radar detection is needed, as in the definition of
+ *	&struct ieee80211_iface_combination.@radar_detect_widths
+ * @iftype_num: array with the number of interfaces of each interface
+ *	type.  The index is the interface type as specified in &enum
+ *	nl80211_iftype.
+ * @new_beacon_int: set this to the beacon interval of a new interface
+ *	that's not operating yet, if such is to be checked as part of
+ *	the verification
+ */
+struct iface_combination_params {
+	int num_different_channels;
+	u8 radar_detect;
+	int iftype_num[NUM_NL80211_IFTYPES];
+	u32 new_beacon_int;
+};
+
+/**
  * enum station_parameters_apply_mask - station parameter values to apply
  * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
  * @STATION_PARAM_APPLY_CAPABILITY: apply new capability
@@ -1761,9 +1785,11 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);
  * @key_len: length of WEP key for shared key authentication
  * @key_idx: index of WEP key for shared key authentication
  * @key: WEP key for shared key authentication
- * @sae_data: Non-IE data to use with SAE or %NULL. This starts with
- *	Authentication transaction sequence number field.
- * @sae_data_len: Length of sae_data buffer in octets
+ * @auth_data: Fields and elements in Authentication frames. This contains
+ *	the authentication frame body (non-IE and IE data), excluding the
+ *	Authentication algorithm number, i.e., starting at the Authentication
+ *	transaction sequence number field.
+ * @auth_data_len: Length of auth_data buffer in octets
  */
 struct cfg80211_auth_request {
 	struct cfg80211_bss *bss;
@@ -1772,8 +1798,8 @@ struct cfg80211_auth_request {
 	enum nl80211_auth_type auth_type;
 	const u8 *key;
 	u8 key_len, key_idx;
-	const u8 *sae_data;
-	size_t sae_data_len;
+	const u8 *auth_data;
+	size_t auth_data_len;
 };
 
 /**
@@ -1814,6 +1840,12 @@ enum cfg80211_assoc_req_flags {
  * @ht_capa_mask:  The bits of ht_capa which are to be used.
  * @vht_capa: VHT capability override
  * @vht_capa_mask: VHT capability mask indicating which fields to use
+ * @fils_kek: FILS KEK for protecting (Re)Association Request/Response frame or
+ *	%NULL if FILS is not used.
+ * @fils_kek_len: Length of fils_kek in octets
+ * @fils_nonces: FILS nonces (part of AAD) for protecting (Re)Association
+ *	Request/Response frame or %NULL if FILS is not used. This field starts
+ *	with 16 octets of STA Nonce followed by 16 octets of AP Nonce.
  */
 struct cfg80211_assoc_request {
 	struct cfg80211_bss *bss;
@@ -1825,6 +1857,9 @@ struct cfg80211_assoc_request {
 	struct ieee80211_ht_cap ht_capa;
 	struct ieee80211_ht_cap ht_capa_mask;
 	struct ieee80211_vht_cap vht_capa, vht_capa_mask;
+	const u8 *fils_kek;
+	size_t fils_kek_len;
+	const u8 *fils_nonces;
 };
 
 /**
@@ -2016,6 +2051,18 @@ struct cfg80211_connect_params {
 };
 
 /**
+ * enum cfg80211_connect_params_changed - Connection parameters being updated
+ *
+ * This enum provides information of all connect parameters that
+ * have to be updated as part of update_connect_params() call.
+ *
+ * @UPDATE_ASSOC_IES: Indicates whether association request IEs are updated
+ */
+enum cfg80211_connect_params_changed {
+	UPDATE_ASSOC_IES		= BIT(0),
+};
+
+/**
  * enum wiphy_params_flags - set_wiphy_params bitfield values
  * @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed
  * @WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed
@@ -2536,9 +2583,18 @@ struct cfg80211_nan_func {
  *	cases, the result of roaming is indicated with a call to
  *	cfg80211_roamed() or cfg80211_roamed_bss().
  *	(invoked with the wireless_dev mutex held)
- * @disconnect: Disconnect from the BSS/ESS. Once done, call
- *	cfg80211_disconnected().
+ * @update_connect_params: Update the connect parameters while connected to a
+ *	BSS. The updated parameters can be used by driver/firmware for
+ *	subsequent BSS selection (roaming) decisions and to form the
+ *	Authentication/(Re)Association Request frames. This call does not
+ *	request an immediate disassociation or reassociation with the current
+ *	BSS, i.e., this impacts only subsequent (re)associations. The bits in
+ *	changed are defined in &enum cfg80211_connect_params_changed.
  *	(invoked with the wireless_dev mutex held)
+ * @disconnect: Disconnect from the BSS/ESS or stop connection attempts if
+ *      connection is in progress. Once done, call cfg80211_disconnected() in
+ *      case connection was already established (invoked with the
+ *      wireless_dev mutex held), otherwise call cfg80211_connect_timeout().
  *
  * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call
  *	cfg80211_ibss_joined(), also call that function when changing BSSID due
@@ -2706,6 +2762,8 @@ struct cfg80211_nan_func {
  * @nan_change_conf: changes NAN configuration. The changed parameters must
  *	be specified in @changes (using &enum cfg80211_nan_conf_changes);
  *	All other parameters must be ignored.
+ *
+ * @set_multicast_to_unicast: configure multicast to unicast conversion for BSS
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2820,6 +2878,10 @@ struct cfg80211_ops {
 
 	int	(*connect)(struct wiphy *wiphy, struct net_device *dev,
 			   struct cfg80211_connect_params *sme);
+	int	(*update_connect_params)(struct wiphy *wiphy,
+					 struct net_device *dev,
+					 struct cfg80211_connect_params *sme,
+					 u32 changed);
 	int	(*disconnect)(struct wiphy *wiphy, struct net_device *dev,
 			      u16 reason_code);
 
@@ -2982,6 +3044,10 @@ struct cfg80211_ops {
 				   struct wireless_dev *wdev,
 				   struct cfg80211_nan_conf *conf,
 				   u32 changes);
+
+	int	(*set_multicast_to_unicast)(struct wiphy *wiphy,
+					    struct net_device *dev,
+					    const bool enabled);
 };
 
 /*
@@ -3080,6 +3146,12 @@ struct ieee80211_iface_limit {
  *	only in special cases.
  * @radar_detect_widths: bitmap of channel widths supported for radar detection
  * @radar_detect_regions: bitmap of regions supported for radar detection
+ * @beacon_int_min_gcd: This interface combination supports different
+ *	beacon intervals.
+ *	= 0 - all beacon intervals for different interface must be same.
+ *	> 0 - any beacon interval for the interface part of this combination AND
+ *	      *GCD* of all beacon intervals from beaconing interfaces of this
+ *	      combination must be greater or equal to this value.
  *
  * With this structure the driver can describe which interface
  * combinations it supports concurrently.
@@ -3138,6 +3210,7 @@ struct ieee80211_iface_combination {
 	bool beacon_int_infra_match;
 	u8 radar_detect_widths;
 	u8 radar_detect_regions;
+	u32 beacon_int_min_gcd;
 };
 
 struct ieee80211_txrx_stypes {
@@ -3745,8 +3818,8 @@ struct cfg80211_cached_keys;
  * @beacon_interval: beacon interval used on this device for transmitting
  *	beacons, 0 when not valid
  * @address: The address for this device, valid only if @netdev is %NULL
- * @p2p_started: true if this is a P2P Device that has been started
- * @nan_started: true if this is a NAN interface that has been started
+ * @is_running: true if this is a non-netdev device that has been started, e.g.
+ *	the P2P Device.
  * @cac_started: true if DFS channel availability check has been started
  * @cac_start_time: timestamp (jiffies) when the dfs state was entered.
  * @cac_time_ms: CAC time in ms
@@ -3778,7 +3851,7 @@ struct wireless_dev {
 
 	struct mutex mtx;
 
-	bool use_4addr, p2p_started, nan_started;
+	bool use_4addr, is_running;
 
 	u8 address[ETH_ALEN] __aligned(sizeof(u16));
 
@@ -3835,6 +3908,13 @@ static inline u8 *wdev_address(struct wireless_dev *wdev)
 	return wdev->address;
 }
 
+static inline bool wdev_running(struct wireless_dev *wdev)
+{
+	if (wdev->netdev)
+		return netif_running(wdev->netdev);
+	return wdev->is_running;
+}
+
 /**
  * wdev_priv - return wiphy priv from wireless_dev
  *
@@ -4140,6 +4220,27 @@ static inline const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len)
 }
 
 /**
+ * cfg80211_find_ext_ie - find information element with EID Extension in data
+ *
+ * @ext_eid: element ID Extension
+ * @ies: data consisting of IEs
+ * @len: length of data
+ *
+ * Return: %NULL if the extended element ID could not be found or if
+ * the element is invalid (claims to be longer than the given
+ * data), or a pointer to the first byte of the requested
+ * element, that is the byte containing the element ID.
+ *
+ * Note: There are no checks on the element length other than
+ * having to fit into the given data.
+ */
+static inline const u8 *cfg80211_find_ext_ie(u8 ext_eid, const u8 *ies, int len)
+{
+	return cfg80211_find_ie_match(WLAN_EID_EXTENSION, ies, len,
+				      &ext_eid, 1, 2);
+}
+
+/**
  * cfg80211_find_vendor_ie - find vendor specific information element in data
  *
  * @oui: vendor OUI
@@ -4539,7 +4640,8 @@ void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr);
  *	moves to cfg80211 in this call
  * @buf: authentication frame (header + body)
  * @len: length of the frame data
- * @uapsd_queues: bitmap of ACs configured to uapsd. -1 if n/a.
+ * @uapsd_queues: bitmap of queues configured for uapsd. Same format
+ *	as the AC bitmap in the QoS info field
  *
  * After being asked to associate via cfg80211_ops::assoc() the driver must
  * call either this function or cfg80211_auth_timeout().
@@ -5575,36 +5677,20 @@ unsigned int ieee80211_get_num_supported_channels(struct wiphy *wiphy);
  * cfg80211_check_combinations - check interface combinations
  *
  * @wiphy: the wiphy
- * @num_different_channels: the number of different channels we want
- *	to use for verification
- * @radar_detect: a bitmap where each bit corresponds to a channel
- *	width where radar detection is needed, as in the definition of
- *	&struct ieee80211_iface_combination.@radar_detect_widths
- * @iftype_num: array with the numbers of interfaces of each interface
- *	type.  The index is the interface type as specified in &enum
- *	nl80211_iftype.
+ * @params: the interface combinations parameter
  *
  * This function can be called by the driver to check whether a
  * combination of interfaces and their types are allowed according to
  * the interface combinations.
  */
 int cfg80211_check_combinations(struct wiphy *wiphy,
-				const int num_different_channels,
-				const u8 radar_detect,
-				const int iftype_num[NUM_NL80211_IFTYPES]);
+				struct iface_combination_params *params);
 
 /**
  * cfg80211_iter_combinations - iterate over matching combinations
  *
  * @wiphy: the wiphy
- * @num_different_channels: the number of different channels we want
- *	to use for verification
- * @radar_detect: a bitmap where each bit corresponds to a channel
- *	width where radar detection is needed, as in the definition of
- *	&struct ieee80211_iface_combination.@radar_detect_widths
- * @iftype_num: array with the numbers of interfaces of each interface
- *	type.  The index is the interface type as specified in &enum
- *	nl80211_iftype.
+ * @params: the interface combinations parameter
  * @iter: function to call for each matching combination
  * @data: pointer to pass to iter function
  *
@@ -5613,9 +5699,7 @@ int cfg80211_check_combinations(struct wiphy *wiphy,
  * purposes.
  */
 int cfg80211_iter_combinations(struct wiphy *wiphy,
-			       const int num_different_channels,
-			       const u8 radar_detect,
-			       const int iftype_num[NUM_NL80211_IFTYPES],
+			       struct iface_combination_params *params,
 			       void (*iter)(const struct ieee80211_iface_combination *c,
 					    void *data),
 			       void *data);
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
index ba07b9d8ed63..d0e7e3f8e67a 100644
--- a/include/net/ieee80211_radiotap.h
+++ b/include/net/ieee80211_radiotap.h
@@ -333,9 +333,9 @@ enum ieee80211_radiotap_type {
 #define IEEE80211_RADIOTAP_TIMESTAMP_UNIT_NS			0x0003
 #define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_MASK			0x00F0
 #define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_BEGIN_MDPU		0x0000
-#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_EO_MPDU		0x0010
+#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_PLCP_SIG_ACQ		0x0010
 #define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_EO_PPDU		0x0020
-#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_PLCP_SIG_ACQ		0x0030
+#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_EO_MPDU		0x0030
 #define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_UNKNOWN		0x00F0
 
 #define IEEE80211_RADIOTAP_TIMESTAMP_FLAG_64BIT			0x00
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index a810dfcb83c2..b9b24abd9103 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1438,7 +1438,7 @@ enum ieee80211_vif_flags {
 struct ieee80211_vif {
 	enum nl80211_iftype type;
 	struct ieee80211_bss_conf bss_conf;
-	u8 addr[ETH_ALEN];
+	u8 addr[ETH_ALEN] __aligned(2);
 	bool p2p;
 	bool csa_active;
 	bool mu_mimo_owner;
@@ -1745,7 +1745,8 @@ struct ieee80211_sta_rates {
  * @drv_priv: data area for driver use, will always be aligned to
  *	sizeof(void *), size is determined in hw information.
  * @uapsd_queues: bitmap of queues configured for uapsd. Only valid
- *	if wme is supported.
+ *	if wme is supported. The bits order is like in
+ *	IEEE80211_WMM_IE_STA_QOSINFO_AC_*.
  * @max_sp: max Service Period. Only valid if wme is supported.
  * @bandwidth: current bandwidth the station can receive with
  * @rx_nss: in HT/VHT, the maximum number of spatial streams the
@@ -2025,6 +2026,10 @@ struct ieee80211_txq {
  *	drivers, mac80211 packet loss mechanism will not be triggered and driver
  *	is completely depending on firmware event for station kickout.
  *
+ * @IEEE80211_HW_SUPPORTS_TX_FRAG: Hardware does fragmentation by itself.
+ *	The stack will not do fragmentation.
+ *	The callback for @set_frag_threshold should be set as well.
+ *
  * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
  */
 enum ieee80211_hw_flags {
@@ -2066,6 +2071,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_TX_AMSDU,
 	IEEE80211_HW_TX_FRAG_LIST,
 	IEEE80211_HW_REPORTS_LOW_ACK,
+	IEEE80211_HW_SUPPORTS_TX_FRAG,
 
 	/* keep last, obviously */
 	NUM_IEEE80211_HW_FLAGS
@@ -3093,8 +3099,9 @@ enum ieee80211_reconfig_type {
  *	The callback must be atomic.
  *
  * @set_frag_threshold: Configuration of fragmentation threshold. Assign this
- *	if the device does fragmentation by itself; if this callback is
- *	implemented then the stack will not do fragmentation.
+ *	if the device does fragmentation by itself. Note that to prevent the
+ *	stack from doing fragmentation IEEE80211_HW_SUPPORTS_TX_FRAG
+ *	should be set as well.
  *	The callback can sleep.
  *
  * @set_rts_threshold: Configuration of RTS threshold (if device needs it)
@@ -4087,6 +4094,10 @@ void ieee80211_sta_pspoll(struct ieee80211_sta *sta);
  * This must be used in conjunction with ieee80211_sta_ps_transition()
  * and possibly ieee80211_sta_pspoll(); calls to all three must be
  * serialized.
+ * %IEEE80211_NUM_TIDS can be passed as the tid if the tid is unknown.
+ * In this case, mac80211 will not check that this tid maps to an AC
+ * that is trigger enabled and assume that the caller did the proper
+ * checks.
  */
 void ieee80211_sta_uapsd_trigger(struct ieee80211_sta *sta, u8 tid);