Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Some highlights from this development cycle:

   1) Big refactoring of ipv6 route and neigh handling to support
      nexthop objects configurable as units from userspace. From David
      Ahern.

   2) Convert explored_states in BPF verifier into a hash table,
      significantly decreased state held for programs with bpf2bpf
      calls, from Alexei Starovoitov.

   3) Implement bpf_send_signal() helper, from Yonghong Song.

   4) Various classifier enhancements to mvpp2 driver, from Maxime
      Chevallier.

   5) Add aRFS support to hns3 driver, from Jian Shen.

   6) Fix use after free in inet frags by allocating fqdirs dynamically
      and reworking how rhashtable dismantle occurs, from Eric Dumazet.

   7) Add act_ctinfo packet classifier action, from Kevin
      Darbyshire-Bryant.

   8) Add TFO key backup infrastructure, from Jason Baron.

   9) Remove several old and unused ISDN drivers, from Arnd Bergmann.

  10) Add devlink notifications for flash update status to mlxsw driver,
      from Jiri Pirko.

  11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.

  12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.

  13) Various enhancements to ipv6 flow label handling, from Eric
      Dumazet and Willem de Bruijn.

  14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
      der Merwe, and others.

  15) Various improvements to axienet driver including converting it to
      phylink, from Robert Hancock.

  16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.

  17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
      Radulescu.

  18) Add devlink health reporting to mlx5, from Moshe Shemesh.

  19) Convert stmmac over to phylink, from Jose Abreu.

  20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
      Shalom Toledo.

  21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.

  22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.

  23) Track spill/fill of constants in BPF verifier, from Alexei
      Starovoitov.

  24) Support bounded loops in BPF, from Alexei Starovoitov.

  25) Various page_pool API fixes and improvements, from Jesper Dangaard
      Brouer.

  26) Just like ipv4, support ref-countless ipv6 route handling. From
      Wei Wang.

  27) Support VLAN offloading in aquantia driver, from Igor Russkikh.

  28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.

  29) Add flower GRE encap/decap support to nfp driver, from Pieter
      Jansen van Vuuren.

  30) Protect against stack overflow when using act_mirred, from John
      Hurley.

  31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.

  32) Use page_pool API in netsec driver, Ilias Apalodimas.

  33) Add Google gve network driver, from Catherine Sullivan.

  34) More indirect call avoidance, from Paolo Abeni.

  35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.

  36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.

  37) Add MPLS manipulation actions to TC, from John Hurley.

  38) Add sending a packet to connection tracking from TC actions, and
      then allow flower classifier matching on conntrack state. From
      Paul Blakey.

  39) Netfilter hw offload support, from Pablo Neira Ayuso"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
  net/mlx5e: Return in default case statement in tx_post_resync_params
  mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
  net: dsa: add support for BRIDGE_MROUTER attribute
  pkt_sched: Include const.h
  net: netsec: remove static declaration for netsec_set_tx_de()
  net: netsec: remove superfluous if statement
  netfilter: nf_tables: add hardware offload support
  net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
  net: flow_offload: add flow_block_cb_is_busy() and use it
  net: sched: remove tcf block API
  drivers: net: use flow block API
  net: sched: use flow block API
  net: flow_offload: add flow_block_cb_{priv, incref, decref}()
  net: flow_offload: add list handling functions
  net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
  net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
  net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
  net: flow_offload: add flow_block_cb_setup_simple()
  net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
  net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
  ...

11 files changed, 129 insertions, 2 deletions

diff --git a/samples/pktgen/README.rst b/samples/pktgen/README.rst
index ff8929da61c5..fd39215db508 100644
--- a/samples/pktgen/README.rst
+++ b/samples/pktgen/README.rst
@@ -20,6 +20,7 @@ across the sample scripts.  Usage example is printed on errors::
   -s : ($PKT_SIZE)  packet size
   -d : ($DEST_IP)   destination IP
   -m : ($DST_MAC)   destination MAC-addr
+  -p : ($DST_PORT)  destination PORT range (e.g. 433-444) is also allowed
   -t : ($THREADS)   threads to start
   -f : ($F_THREAD)  index of first thread (zero indexed CPU number)
   -c : ($SKB_CLONE) SKB clones send before alloc new SKB
diff --git a/samples/pktgen/functions.sh b/samples/pktgen/functions.sh
index f8bb3cd0f4ce..4af4046d71be 100644
--- a/samples/pktgen/functions.sh
+++ b/samples/pktgen/functions.sh
@@ -162,3 +162,37 @@ function get_node_cpus()
 
 	echo $node_cpu_list
 }
+
+# Given a single or range of port(s), return minimum and maximum port number.
+function parse_ports()
+{
+    local port_str=$1
+    local port_list
+    local min_port
+    local max_port
+
+    IFS="-" read -ra port_list <<< $port_str
+
+    min_port=${port_list[0]}
+    max_port=${port_list[1]:-$min_port}
+
+    echo $min_port $max_port
+}
+
+# Given a minimum and maximum port, verify port number.
+function validate_ports()
+{
+    local min_port=$1
+    local max_port=$2
+
+    # 0 < port < 65536
+    if [[ $min_port -gt 0 && $min_port -lt 65536 ]]; then
+	if [[ $max_port -gt 0 && $max_port -lt 65536 ]]; then
+	    if [[ $min_port -le $max_port ]]; then
+		return 0
+	    fi
+	fi
+    fi
+
+    err 5 "Invalid port(s): $min_port-$max_port"
+}
diff --git a/samples/pktgen/parameters.sh b/samples/pktgen/parameters.sh
index 72fc562876e2..a06b00a0c7b6 100644
--- a/samples/pktgen/parameters.sh
+++ b/samples/pktgen/parameters.sh
@@ -10,6 +10,7 @@ function usage() {
     echo "  -s : (\$PKT_SIZE)  packet size"
     echo "  -d : (\$DEST_IP)   destination IP"
     echo "  -m : (\$DST_MAC)   destination MAC-addr"
+    echo "  -p : (\$DST_PORT)  destination PORT range (e.g. 433-444) is also allowed"
     echo "  -t : (\$THREADS)   threads to start"
     echo "  -f : (\$F_THREAD)  index of first thread (zero indexed CPU number)"
     echo "  -c : (\$SKB_CLONE) SKB clones send before alloc new SKB"
@@ -23,7 +24,7 @@ function usage() {
 
 ##  --- Parse command line arguments / parameters ---
 ## echo "Commandline options:"
-while getopts "s:i:d:m:f:t:c:n:b:vxh6" option; do
+while getopts "s:i:d:m:p:f:t:c:n:b:vxh6" option; do
     case $option in
         i) # interface
           export DEV=$OPTARG
@@ -41,6 +42,10 @@ while getopts "s:i:d:m:f:t:c:n:b:vxh6" option; do
           export DST_MAC=$OPTARG
 	  info "Destination MAC set to: DST_MAC=$DST_MAC"
           ;;
+        p) # PORT
+          export DST_PORT=$OPTARG
+	  info "Destination PORT set to: DST_PORT=$DST_PORT"
+          ;;
         f)
 	  export F_THREAD=$OPTARG
 	  info "Index of first thread (zero indexed CPU number): $F_THREAD"
diff --git a/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh b/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
index 2839f7d315cf..e14b1a9144d9 100755
--- a/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
+++ b/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
@@ -41,6 +41,10 @@ fi
 [ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
 [ -z "$BURST" ] && BURST=1024
 [ -z "$COUNT" ] && COUNT="10000000" # Zero means indefinitely
+if [ -n "$DST_PORT" ]; then
+    read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $DST_MIN $DST_MAX
+fi
 
 # Base Config
 DELAY="0"        # Zero means max speed
@@ -69,6 +73,13 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     pg_set $dev "dst_mac $DST_MAC"
     pg_set $dev "dst$IP6 $DEST_IP"
 
+    if [ -n "$DST_PORT" ]; then
+	# Single destination port or random port range
+	pg_set $dev "flag UDPDST_RND"
+	pg_set $dev "udp_dst_min $DST_MIN"
+	pg_set $dev "udp_dst_max $DST_MAX"
+    fi
+
     # Inject packet into RX path of stack
     pg_set $dev "xmit_mode netif_receive"
 
diff --git a/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh b/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh
index e1ee54465def..82c3e504e056 100755
--- a/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh
+++ b/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh
@@ -24,6 +24,10 @@ if [[ -n "$BURST" ]]; then
     err 1 "Bursting not supported for this mode"
 fi
 [ -z "$COUNT" ] && COUNT="10000000" # Zero means indefinitely
+if [ -n "$DST_PORT" ]; then
+    read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $DST_MIN $DST_MAX
+fi
 
 # Base Config
 DELAY="0"        # Zero means max speed
@@ -52,6 +56,13 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     pg_set $dev "dst_mac $DST_MAC"
     pg_set $dev "dst$IP6 $DEST_IP"
 
+    if [ -n "$DST_PORT" ]; then
+	# Single destination port or random port range
+	pg_set $dev "flag UDPDST_RND"
+	pg_set $dev "udp_dst_min $DST_MIN"
+	pg_set $dev "udp_dst_max $DST_MAX"
+    fi
+
     # Inject packet into TX qdisc egress path of stack
     pg_set $dev "xmit_mode queue_xmit"
 done
diff --git a/samples/pktgen/pktgen_sample01_simple.sh b/samples/pktgen/pktgen_sample01_simple.sh
index e9ab4edba2d7..d1702fdde8f3 100755
--- a/samples/pktgen/pktgen_sample01_simple.sh
+++ b/samples/pktgen/pktgen_sample01_simple.sh
@@ -22,6 +22,10 @@ fi
 # Example enforce param "-m" for dst_mac
 [ -z "$DST_MAC" ] && usage && err 2 "Must specify -m dst_mac"
 [ -z "$COUNT" ]   && COUNT="100000" # Zero means indefinitely
+if [ -n "$DST_PORT" ]; then
+    read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $DST_MIN $DST_MAX
+fi
 
 # Base Config
 DELAY="0"        # Zero means max speed
@@ -59,6 +63,13 @@ pg_set $DEV "flag NO_TIMESTAMP"
 pg_set $DEV "dst_mac $DST_MAC"
 pg_set $DEV "dst$IP6 $DEST_IP"
 
+if [ -n "$DST_PORT" ]; then
+    # Single destination port or random port range
+    pg_set $DEV "flag UDPDST_RND"
+    pg_set $DEV "udp_dst_min $DST_MIN"
+    pg_set $DEV "udp_dst_max $DST_MAX"
+fi
+
 # Setup random UDP port src range
 pg_set $DEV "flag UDPSRC_RND"
 pg_set $DEV "udp_src_min $UDP_MIN"
diff --git a/samples/pktgen/pktgen_sample02_multiqueue.sh b/samples/pktgen/pktgen_sample02_multiqueue.sh
index 99f740ae9857..7f7a9a27548f 100755
--- a/samples/pktgen/pktgen_sample02_multiqueue.sh
+++ b/samples/pktgen/pktgen_sample02_multiqueue.sh
@@ -29,6 +29,10 @@ if [ -z "$DEST_IP" ]; then
     [ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1"
 fi
 [ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
+if [ -n "$DST_PORT" ]; then
+    read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $DST_MIN $DST_MAX
+fi
 
 # General cleanup everything since last run
 pg_ctrl "reset"
@@ -60,6 +64,13 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     pg_set $dev "dst_mac $DST_MAC"
     pg_set $dev "dst$IP6 $DEST_IP"
 
+    if [ -n "$DST_PORT" ]; then
+	# Single destination port or random port range
+	pg_set $dev "flag UDPDST_RND"
+	pg_set $dev "udp_dst_min $DST_MIN"
+	pg_set $dev "udp_dst_max $DST_MAX"
+    fi
+
     # Setup random UDP port src range
     pg_set $dev "flag UDPSRC_RND"
     pg_set $dev "udp_src_min $UDP_MIN"
diff --git a/samples/pktgen/pktgen_sample03_burst_single_flow.sh b/samples/pktgen/pktgen_sample03_burst_single_flow.sh
index 8fdd36722d9e..b520637817ce 100755
--- a/samples/pktgen/pktgen_sample03_burst_single_flow.sh
+++ b/samples/pktgen/pktgen_sample03_burst_single_flow.sh
@@ -33,6 +33,10 @@ fi
 [ -z "$BURST" ]     && BURST=32
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0" # No need for clones when bursting
 [ -z "$COUNT" ]     && COUNT="0" # Zero means indefinitely
+if [ -n "$DST_PORT" ]; then
+    read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $DST_MIN $DST_MAX
+fi
 
 # Base Config
 DELAY="0"  # Zero means max speed
@@ -60,6 +64,13 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     pg_set $dev "dst_mac $DST_MAC"
     pg_set $dev "dst$IP6 $DEST_IP"
 
+    if [ -n "$DST_PORT" ]; then
+	# Single destination port or random port range
+	pg_set $dev "flag UDPDST_RND"
+	pg_set $dev "udp_dst_min $DST_MIN"
+	pg_set $dev "udp_dst_max $DST_MAX"
+    fi
+
     # Setup burst, for easy testing -b 0 disable bursting
     # (internally in pktgen default and minimum burst=1)
     if [[ ${BURST} -ne 0 ]]; then
diff --git a/samples/pktgen/pktgen_sample04_many_flows.sh b/samples/pktgen/pktgen_sample04_many_flows.sh
index 4df92b7176da..5b6e9d9cb5b5 100755
--- a/samples/pktgen/pktgen_sample04_many_flows.sh
+++ b/samples/pktgen/pktgen_sample04_many_flows.sh
@@ -17,6 +17,10 @@ source ${basedir}/parameters.sh
 [ -z "$DST_MAC" ]   && DST_MAC="90:e2:ba:ff:ff:ff"
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 [ -z "$COUNT" ]     && COUNT="0" # Zero means indefinitely
+if [ -n "$DST_PORT" ]; then
+    read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $DST_MIN $DST_MAX
+fi
 
 # NOTICE:  Script specific settings
 # =======
@@ -56,6 +60,13 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     pg_set $dev "dst_mac $DST_MAC"
     pg_set $dev "dst $DEST_IP"
 
+    if [ -n "$DST_PORT" ]; then
+	# Single destination port or random port range
+	pg_set $dev "flag UDPDST_RND"
+	pg_set $dev "udp_dst_min $DST_MIN"
+	pg_set $dev "udp_dst_max $DST_MAX"
+    fi
+
     # Randomize source IP-addresses
     pg_set $dev "flag IPSRC_RND"
     pg_set $dev "src_min 198.18.0.0"
diff --git a/samples/pktgen/pktgen_sample05_flow_per_thread.sh b/samples/pktgen/pktgen_sample05_flow_per_thread.sh
index 7f8b5e59f01e..0c06e63fbe97 100755
--- a/samples/pktgen/pktgen_sample05_flow_per_thread.sh
+++ b/samples/pktgen/pktgen_sample05_flow_per_thread.sh
@@ -22,7 +22,10 @@ source ${basedir}/parameters.sh
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 [ -z "$BURST" ]     && BURST=32
 [ -z "$COUNT" ]     && COUNT="0" # Zero means indefinitely
-
+if [ -n "$DST_PORT" ]; then
+    read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $DST_MIN $DST_MAX
+fi
 
 # Base Config
 DELAY="0"  # Zero means max speed
@@ -50,6 +53,13 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     pg_set $dev "dst_mac $DST_MAC"
     pg_set $dev "dst $DEST_IP"
 
+    if [ -n "$DST_PORT" ]; then
+	# Single destination port or random port range
+	pg_set $dev "flag UDPDST_RND"
+	pg_set $dev "udp_dst_min $DST_MIN"
+	pg_set $dev "udp_dst_max $DST_MAX"
+    fi
+
     # Setup source IP-addresses based on thread number
     pg_set $dev "src_min 198.18.$((thread+1)).1"
     pg_set $dev "src_max 198.18.$((thread+1)).1"
diff --git a/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh b/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
index 353adc17205e..97f0266c0356 100755
--- a/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
+++ b/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
@@ -35,6 +35,10 @@ if [ -z "$DEST_IP" ]; then
     [ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1"
 fi
 [ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
+if [ -n "$DST_PORT" ]; then
+    read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $DST_MIN $DST_MAX
+fi
 
 # General cleanup everything since last run
 pg_ctrl "reset"
@@ -77,6 +81,13 @@ for ((i = 0; i < $THREADS; i++)); do
     pg_set $dev "dst_mac $DST_MAC"
     pg_set $dev "dst$IP6 $DEST_IP"
 
+    if [ -n "$DST_PORT" ]; then
+	# Single destination port or random port range
+	pg_set $dev "flag UDPDST_RND"
+	pg_set $dev "udp_dst_min $DST_MIN"
+	pg_set $dev "udp_dst_max $DST_MAX"
+    fi
+
     # Setup random UDP port src range
     pg_set $dev "flag UDPSRC_RND"
     pg_set $dev "udp_src_min $UDP_MIN"