ASoC: rsnd: SSI + DMA can select BUSIF

Sound data needs to be sent to R-Car sound SSI when playback.
But, there are 2 interfaces for it.
1st is SSITDR/SSIRDR which are mapped on SSI.
2nd is SSIn_BUSIF which are mapped on SSIU.

2nd SSIn_BUSIF is used when DMA transfer,
and it is always used if sound data came from via SRC.
But, we can use it when SSI+DMA case too.
(Current driver is assuming 1st SSITDR/SSIRDR for it)

2nd SSIn_BUSIF can be used as FIFO.
This is very helpful/useful for SSI+DMA.

But DMA address / DMA ID are not same between 1st/2nd cases.
This patch care about these settings.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

1 files changed, 31 insertions, 2 deletions

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 2df723df5d19..34e84009162b 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -90,6 +90,20 @@ struct rsnd_ssi {
 #define rsnd_ssi_mode_flags(p) ((p)->info->flags)
 #define rsnd_ssi_dai_id(ssi) ((ssi)->info->dai_id)
 
+static int rsnd_ssi_use_busif(struct rsnd_mod *mod)
+{
+	struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod);
+	struct rsnd_dai_stream *io = rsnd_mod_to_io(mod);
+	int use_busif = 0;
+
+	if (!(rsnd_ssi_mode_flags(ssi) & RSND_SSI_NO_BUSIF))
+		use_busif = 1;
+	if (rsnd_io_to_mod_src(io))
+		use_busif = 1;
+
+	return use_busif;
+}
+
 static void rsnd_ssi_status_check(struct rsnd_mod *mod,
 				  u32 bit)
 {
@@ -289,8 +303,6 @@ static int rsnd_ssi_init(struct rsnd_mod *mod,
 	ssi->cr_own	= cr;
 	ssi->err	= -1; /* ignore 1st error */
 
-	rsnd_src_ssi_mode_init(mod, rdai);
-
 	return 0;
 }
 
@@ -389,6 +401,8 @@ static int rsnd_ssi_pio_start(struct rsnd_mod *mod,
 	/* enable PIO IRQ */
 	ssi->cr_etc = UIEN | OIEN | DIEN;
 
+	rsnd_src_ssiu_start(mod, rdai, 0);
+
 	rsnd_src_enable_ssi_irq(mod, rdai);
 
 	rsnd_ssi_hw_start(ssi, rdai, io);
@@ -405,6 +419,8 @@ static int rsnd_ssi_pio_stop(struct rsnd_mod *mod,
 
 	rsnd_ssi_hw_stop(ssi, rdai);
 
+	rsnd_src_ssiu_stop(mod, rdai, 0);
+
 	return 0;
 }
 
@@ -457,6 +473,8 @@ static int rsnd_ssi_dma_start(struct rsnd_mod *mod,
 	/* enable DMA transfer */
 	ssi->cr_etc = DMEN;
 
+	rsnd_src_ssiu_start(mod, rdai, rsnd_ssi_use_busif(mod));
+
 	rsnd_dma_start(dma);
 
 	rsnd_ssi_hw_start(ssi, ssi->rdai, io);
@@ -482,11 +500,19 @@ static int rsnd_ssi_dma_stop(struct rsnd_mod *mod,
 
 	rsnd_dma_stop(dma);
 
+	rsnd_src_ssiu_stop(mod, rdai, 1);
+
 	return 0;
 }
 
+static char *rsnd_ssi_dma_name(struct rsnd_mod *mod)
+{
+	return rsnd_ssi_use_busif(mod) ? "ssiu" : SSI_NAME;
+}
+
 static struct rsnd_mod_ops rsnd_ssi_dma_ops = {
 	.name	= SSI_NAME,
+	.dma_name = rsnd_ssi_dma_name,
 	.probe	= rsnd_ssi_dma_probe,
 	.remove	= rsnd_ssi_dma_remove,
 	.init	= rsnd_ssi_init,
@@ -595,6 +621,9 @@ static void rsnd_of_parse_ssi(struct platform_device *pdev,
 		 */
 		ssi_info->dma_id = of_get_property(np, "pio-transfer", NULL) ?
 			0 : 1;
+
+		if (of_get_property(np, "no-busif", NULL))
+			ssi_info->flags |= RSND_SSI_NO_BUSIF;
 	}
 
 rsnd_of_parse_ssi_end: