Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Some highlights from this development cycle:

   1) Big refactoring of ipv6 route and neigh handling to support
      nexthop objects configurable as units from userspace. From David
      Ahern.

   2) Convert explored_states in BPF verifier into a hash table,
      significantly decreased state held for programs with bpf2bpf
      calls, from Alexei Starovoitov.

   3) Implement bpf_send_signal() helper, from Yonghong Song.

   4) Various classifier enhancements to mvpp2 driver, from Maxime
      Chevallier.

   5) Add aRFS support to hns3 driver, from Jian Shen.

   6) Fix use after free in inet frags by allocating fqdirs dynamically
      and reworking how rhashtable dismantle occurs, from Eric Dumazet.

   7) Add act_ctinfo packet classifier action, from Kevin
      Darbyshire-Bryant.

   8) Add TFO key backup infrastructure, from Jason Baron.

   9) Remove several old and unused ISDN drivers, from Arnd Bergmann.

  10) Add devlink notifications for flash update status to mlxsw driver,
      from Jiri Pirko.

  11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.

  12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.

  13) Various enhancements to ipv6 flow label handling, from Eric
      Dumazet and Willem de Bruijn.

  14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
      der Merwe, and others.

  15) Various improvements to axienet driver including converting it to
      phylink, from Robert Hancock.

  16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.

  17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
      Radulescu.

  18) Add devlink health reporting to mlx5, from Moshe Shemesh.

  19) Convert stmmac over to phylink, from Jose Abreu.

  20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
      Shalom Toledo.

  21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.

  22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.

  23) Track spill/fill of constants in BPF verifier, from Alexei
      Starovoitov.

  24) Support bounded loops in BPF, from Alexei Starovoitov.

  25) Various page_pool API fixes and improvements, from Jesper Dangaard
      Brouer.

  26) Just like ipv4, support ref-countless ipv6 route handling. From
      Wei Wang.

  27) Support VLAN offloading in aquantia driver, from Igor Russkikh.

  28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.

  29) Add flower GRE encap/decap support to nfp driver, from Pieter
      Jansen van Vuuren.

  30) Protect against stack overflow when using act_mirred, from John
      Hurley.

  31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.

  32) Use page_pool API in netsec driver, Ilias Apalodimas.

  33) Add Google gve network driver, from Catherine Sullivan.

  34) More indirect call avoidance, from Paolo Abeni.

  35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.

  36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.

  37) Add MPLS manipulation actions to TC, from John Hurley.

  38) Add sending a packet to connection tracking from TC actions, and
      then allow flower classifier matching on conntrack state. From
      Paul Blakey.

  39) Netfilter hw offload support, from Pablo Neira Ayuso"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
  net/mlx5e: Return in default case statement in tx_post_resync_params
  mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
  net: dsa: add support for BRIDGE_MROUTER attribute
  pkt_sched: Include const.h
  net: netsec: remove static declaration for netsec_set_tx_de()
  net: netsec: remove superfluous if statement
  netfilter: nf_tables: add hardware offload support
  net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
  net: flow_offload: add flow_block_cb_is_busy() and use it
  net: sched: remove tcf block API
  drivers: net: use flow block API
  net: sched: use flow block API
  net: flow_offload: add flow_block_cb_{priv, incref, decref}()
  net: flow_offload: add list handling functions
  net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
  net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
  net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
  net: flow_offload: add flow_block_cb_setup_simple()
  net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
  net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
  ...

1 files changed, 366 insertions, 12 deletions

diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index 7a4e21a31523..66f04a4846a5 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -15,6 +15,7 @@
 #include <sys/stat.h>
 
 #include <linux/err.h>
+#include <linux/sizes.h>
 
 #include <bpf.h>
 #include <btf.h>
@@ -748,12 +749,351 @@ static int do_detach(int argc, char **argv)
 	return 0;
 }
 
+static int check_single_stdin(char *file_data_in, char *file_ctx_in)
+{
+	if (file_data_in && file_ctx_in &&
+	    !strcmp(file_data_in, "-") && !strcmp(file_ctx_in, "-")) {
+		p_err("cannot use standard input for both data_in and ctx_in");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int get_run_data(const char *fname, void **data_ptr, unsigned int *size)
+{
+	size_t block_size = 256;
+	size_t buf_size = block_size;
+	size_t nb_read = 0;
+	void *tmp;
+	FILE *f;
+
+	if (!fname) {
+		*data_ptr = NULL;
+		*size = 0;
+		return 0;
+	}
+
+	if (!strcmp(fname, "-"))
+		f = stdin;
+	else
+		f = fopen(fname, "r");
+	if (!f) {
+		p_err("failed to open %s: %s", fname, strerror(errno));
+		return -1;
+	}
+
+	*data_ptr = malloc(block_size);
+	if (!*data_ptr) {
+		p_err("failed to allocate memory for data_in/ctx_in: %s",
+		      strerror(errno));
+		goto err_fclose;
+	}
+
+	while ((nb_read += fread(*data_ptr + nb_read, 1, block_size, f))) {
+		if (feof(f))
+			break;
+		if (ferror(f)) {
+			p_err("failed to read data_in/ctx_in from %s: %s",
+			      fname, strerror(errno));
+			goto err_free;
+		}
+		if (nb_read > buf_size - block_size) {
+			if (buf_size == UINT32_MAX) {
+				p_err("data_in/ctx_in is too long (max: %d)",
+				      UINT32_MAX);
+				goto err_free;
+			}
+			/* No space for fread()-ing next chunk; realloc() */
+			buf_size *= 2;
+			tmp = realloc(*data_ptr, buf_size);
+			if (!tmp) {
+				p_err("failed to reallocate data_in/ctx_in: %s",
+				      strerror(errno));
+				goto err_free;
+			}
+			*data_ptr = tmp;
+		}
+	}
+	if (f != stdin)
+		fclose(f);
+
+	*size = nb_read;
+	return 0;
+
+err_free:
+	free(*data_ptr);
+	*data_ptr = NULL;
+err_fclose:
+	if (f != stdin)
+		fclose(f);
+	return -1;
+}
+
+static void hex_print(void *data, unsigned int size, FILE *f)
+{
+	size_t i, j;
+	char c;
+
+	for (i = 0; i < size; i += 16) {
+		/* Row offset */
+		fprintf(f, "%07zx\t", i);
+
+		/* Hexadecimal values */
+		for (j = i; j < i + 16 && j < size; j++)
+			fprintf(f, "%02x%s", *(uint8_t *)(data + j),
+				j % 2 ? " " : "");
+		for (; j < i + 16; j++)
+			fprintf(f, "  %s", j % 2 ? " " : "");
+
+		/* ASCII values (if relevant), '.' otherwise */
+		fprintf(f, "| ");
+		for (j = i; j < i + 16 && j < size; j++) {
+			c = *(char *)(data + j);
+			if (c < ' ' || c > '~')
+				c = '.';
+			fprintf(f, "%c%s", c, j == i + 7 ? " " : "");
+		}
+
+		fprintf(f, "\n");
+	}
+}
+
+static int
+print_run_output(void *data, unsigned int size, const char *fname,
+		 const char *json_key)
+{
+	size_t nb_written;
+	FILE *f;
+
+	if (!fname)
+		return 0;
+
+	if (!strcmp(fname, "-")) {
+		f = stdout;
+		if (json_output) {
+			jsonw_name(json_wtr, json_key);
+			print_data_json(data, size);
+		} else {
+			hex_print(data, size, f);
+		}
+		return 0;
+	}
+
+	f = fopen(fname, "w");
+	if (!f) {
+		p_err("failed to open %s: %s", fname, strerror(errno));
+		return -1;
+	}
+
+	nb_written = fwrite(data, 1, size, f);
+	fclose(f);
+	if (nb_written != size) {
+		p_err("failed to write output data/ctx: %s", strerror(errno));
+		return -1;
+	}
+
+	return 0;
+}
+
+static int alloc_run_data(void **data_ptr, unsigned int size_out)
+{
+	*data_ptr = calloc(size_out, 1);
+	if (!*data_ptr) {
+		p_err("failed to allocate memory for output data/ctx: %s",
+		      strerror(errno));
+		return -1;
+	}
+
+	return 0;
+}
+
+static int do_run(int argc, char **argv)
+{
+	char *data_fname_in = NULL, *data_fname_out = NULL;
+	char *ctx_fname_in = NULL, *ctx_fname_out = NULL;
+	struct bpf_prog_test_run_attr test_attr = {0};
+	const unsigned int default_size = SZ_32K;
+	void *data_in = NULL, *data_out = NULL;
+	void *ctx_in = NULL, *ctx_out = NULL;
+	unsigned int repeat = 1;
+	int fd, err;
+
+	if (!REQ_ARGS(4))
+		return -1;
+
+	fd = prog_parse_fd(&argc, &argv);
+	if (fd < 0)
+		return -1;
+
+	while (argc) {
+		if (detect_common_prefix(*argv, "data_in", "data_out",
+					 "data_size_out", NULL))
+			return -1;
+		if (detect_common_prefix(*argv, "ctx_in", "ctx_out",
+					 "ctx_size_out", NULL))
+			return -1;
+
+		if (is_prefix(*argv, "data_in")) {
+			NEXT_ARG();
+			if (!REQ_ARGS(1))
+				return -1;
+
+			data_fname_in = GET_ARG();
+			if (check_single_stdin(data_fname_in, ctx_fname_in))
+				return -1;
+		} else if (is_prefix(*argv, "data_out")) {
+			NEXT_ARG();
+			if (!REQ_ARGS(1))
+				return -1;
+
+			data_fname_out = GET_ARG();
+		} else if (is_prefix(*argv, "data_size_out")) {
+			char *endptr;
+
+			NEXT_ARG();
+			if (!REQ_ARGS(1))
+				return -1;
+
+			test_attr.data_size_out = strtoul(*argv, &endptr, 0);
+			if (*endptr) {
+				p_err("can't parse %s as output data size",
+				      *argv);
+				return -1;
+			}
+			NEXT_ARG();
+		} else if (is_prefix(*argv, "ctx_in")) {
+			NEXT_ARG();
+			if (!REQ_ARGS(1))
+				return -1;
+
+			ctx_fname_in = GET_ARG();
+			if (check_single_stdin(data_fname_in, ctx_fname_in))
+				return -1;
+		} else if (is_prefix(*argv, "ctx_out")) {
+			NEXT_ARG();
+			if (!REQ_ARGS(1))
+				return -1;
+
+			ctx_fname_out = GET_ARG();
+		} else if (is_prefix(*argv, "ctx_size_out")) {
+			char *endptr;
+
+			NEXT_ARG();
+			if (!REQ_ARGS(1))
+				return -1;
+
+			test_attr.ctx_size_out = strtoul(*argv, &endptr, 0);
+			if (*endptr) {
+				p_err("can't parse %s as output context size",
+				      *argv);
+				return -1;
+			}
+			NEXT_ARG();
+		} else if (is_prefix(*argv, "repeat")) {
+			char *endptr;
+
+			NEXT_ARG();
+			if (!REQ_ARGS(1))
+				return -1;
+
+			repeat = strtoul(*argv, &endptr, 0);
+			if (*endptr) {
+				p_err("can't parse %s as repeat number",
+				      *argv);
+				return -1;
+			}
+			NEXT_ARG();
+		} else {
+			p_err("expected no more arguments, 'data_in', 'data_out', 'data_size_out', 'ctx_in', 'ctx_out', 'ctx_size_out' or 'repeat', got: '%s'?",
+			      *argv);
+			return -1;
+		}
+	}
+
+	err = get_run_data(data_fname_in, &data_in, &test_attr.data_size_in);
+	if (err)
+		return -1;
+
+	if (data_in) {
+		if (!test_attr.data_size_out)
+			test_attr.data_size_out = default_size;
+		err = alloc_run_data(&data_out, test_attr.data_size_out);
+		if (err)
+			goto free_data_in;
+	}
+
+	err = get_run_data(ctx_fname_in, &ctx_in, &test_attr.ctx_size_in);
+	if (err)
+		goto free_data_out;
+
+	if (ctx_in) {
+		if (!test_attr.ctx_size_out)
+			test_attr.ctx_size_out = default_size;
+		err = alloc_run_data(&ctx_out, test_attr.ctx_size_out);
+		if (err)
+			goto free_ctx_in;
+	}
+
+	test_attr.prog_fd	= fd;
+	test_attr.repeat	= repeat;
+	test_attr.data_in	= data_in;
+	test_attr.data_out	= data_out;
+	test_attr.ctx_in	= ctx_in;
+	test_attr.ctx_out	= ctx_out;
+
+	err = bpf_prog_test_run_xattr(&test_attr);
+	if (err) {
+		p_err("failed to run program: %s", strerror(errno));
+		goto free_ctx_out;
+	}
+
+	err = 0;
+
+	if (json_output)
+		jsonw_start_object(json_wtr);	/* root */
+
+	/* Do not exit on errors occurring when printing output data/context,
+	 * we still want to print return value and duration for program run.
+	 */
+	if (test_attr.data_size_out)
+		err += print_run_output(test_attr.data_out,
+					test_attr.data_size_out,
+					data_fname_out, "data_out");
+	if (test_attr.ctx_size_out)
+		err += print_run_output(test_attr.ctx_out,
+					test_attr.ctx_size_out,
+					ctx_fname_out, "ctx_out");
+
+	if (json_output) {
+		jsonw_uint_field(json_wtr, "retval", test_attr.retval);
+		jsonw_uint_field(json_wtr, "duration", test_attr.duration);
+		jsonw_end_object(json_wtr);	/* root */
+	} else {
+		fprintf(stdout, "Return value: %u, duration%s: %uns\n",
+			test_attr.retval,
+			repeat > 1 ? " (average)" : "", test_attr.duration);
+	}
+
+free_ctx_out:
+	free(ctx_out);
+free_ctx_in:
+	free(ctx_in);
+free_data_out:
+	free(data_out);
+free_data_in:
+	free(data_in);
+
+	return err;
+}
+
 static int load_with_options(int argc, char **argv, bool first_prog_only)
 {
-	enum bpf_attach_type expected_attach_type;
-	struct bpf_object_open_attr attr = {
-		.prog_type	= BPF_PROG_TYPE_UNSPEC,
+	struct bpf_object_load_attr load_attr = { 0 };
+	struct bpf_object_open_attr open_attr = {
+		.prog_type = BPF_PROG_TYPE_UNSPEC,
 	};
+	enum bpf_attach_type expected_attach_type;
 	struct map_replace *map_replace = NULL;
 	struct bpf_program *prog = NULL, *pos;
 	unsigned int old_map_fds = 0;
@@ -767,7 +1107,7 @@ static int load_with_options(int argc, char **argv, bool first_prog_only)
 
 	if (!REQ_ARGS(2))
 		return -1;
-	attr.file = GET_ARG();
+	open_attr.file = GET_ARG();
 	pinfile = GET_ARG();
 
 	while (argc) {
@@ -776,7 +1116,7 @@ static int load_with_options(int argc, char **argv, bool first_prog_only)
 
 			NEXT_ARG();
 
-			if (attr.prog_type != BPF_PROG_TYPE_UNSPEC) {
+			if (open_attr.prog_type != BPF_PROG_TYPE_UNSPEC) {
 				p_err("program type already specified");
 				goto err_free_reuse_maps;
 			}
@@ -793,7 +1133,8 @@ static int load_with_options(int argc, char **argv, bool first_prog_only)
 			strcat(type, *argv);
 			strcat(type, "/");
 
-			err = libbpf_prog_type_by_name(type, &attr.prog_type,
+			err = libbpf_prog_type_by_name(type,
+						       &open_attr.prog_type,
 						       &expected_attach_type);
 			free(type);
 			if (err < 0)
@@ -881,16 +1222,16 @@ static int load_with_options(int argc, char **argv, bool first_prog_only)
 
 	set_max_rlimit();
 
-	obj = __bpf_object__open_xattr(&attr, bpf_flags);
+	obj = __bpf_object__open_xattr(&open_attr, bpf_flags);
 	if (IS_ERR_OR_NULL(obj)) {
 		p_err("failed to open object file");
 		goto err_free_reuse_maps;
 	}
 
 	bpf_object__for_each_program(pos, obj) {
-		enum bpf_prog_type prog_type = attr.prog_type;
+		enum bpf_prog_type prog_type = open_attr.prog_type;
 
-		if (attr.prog_type == BPF_PROG_TYPE_UNSPEC) {
+		if (open_attr.prog_type == BPF_PROG_TYPE_UNSPEC) {
 			const char *sec_name = bpf_program__title(pos, false);
 
 			err = libbpf_prog_type_by_name(sec_name, &prog_type,
@@ -960,7 +1301,12 @@ static int load_with_options(int argc, char **argv, bool first_prog_only)
 		goto err_close_obj;
 	}
 
-	err = bpf_object__load(obj);
+	load_attr.obj = obj;
+	if (verifier_logs)
+		/* log_level1 + log_level2 + stats, but not stable UAPI */
+		load_attr.log_level = 1 + 2 + 4;
+
+	err = bpf_object__load_xattr(&load_attr);
 	if (err) {
 		p_err("failed to load object file");
 		goto err_close_obj;
@@ -1051,6 +1397,11 @@ static int do_help(int argc, char **argv)
 		"                         [pinmaps MAP_DIR]\n"
 		"       %s %s attach PROG ATTACH_TYPE [MAP]\n"
 		"       %s %s detach PROG ATTACH_TYPE [MAP]\n"
+		"       %s %s run PROG \\\n"
+		"                         data_in FILE \\\n"
+		"                         [data_out FILE [data_size_out L]] \\\n"
+		"                         [ctx_in FILE [ctx_out FILE [ctx_size_out M]]] \\\n"
+		"                         [repeat N]\n"
 		"       %s %s tracelog\n"
 		"       %s %s help\n"
 		"\n"
@@ -1064,14 +1415,16 @@ static int do_help(int argc, char **argv)
 		"                 cgroup/bind4 | cgroup/bind6 | cgroup/post_bind4 |\n"
 		"                 cgroup/post_bind6 | cgroup/connect4 | cgroup/connect6 |\n"
 		"                 cgroup/sendmsg4 | cgroup/sendmsg6 | cgroup/recvmsg4 |\n"
-		"                 cgroup/recvmsg6 }\n"
+		"                 cgroup/recvmsg6 | cgroup/getsockopt |\n"
+		"                 cgroup/setsockopt }\n"
 		"       ATTACH_TYPE := { msg_verdict | stream_verdict | stream_parser |\n"
 		"                        flow_dissector }\n"
 		"       " HELP_SPEC_OPTIONS "\n"
 		"",
 		bin_name, argv[-2], bin_name, argv[-2], bin_name, argv[-2],
 		bin_name, argv[-2], bin_name, argv[-2], bin_name, argv[-2],
-		bin_name, argv[-2], bin_name, argv[-2], bin_name, argv[-2]);
+		bin_name, argv[-2], bin_name, argv[-2], bin_name, argv[-2],
+		bin_name, argv[-2]);
 
 	return 0;
 }
@@ -1087,6 +1440,7 @@ static const struct cmd cmds[] = {
 	{ "attach",	do_attach },
 	{ "detach",	do_detach },
 	{ "tracelog",	do_tracelog },
+	{ "run",	do_run },
 	{ 0 }
 };