summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/bus/ti-gpmc.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/clk-exynos-audss.txt64
-rw-r--r--Documentation/devicetree/bindings/dma/ste-dma40.txt66
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-samsung.txt43
-rw-r--r--Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt46
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmc-nand.txt8
-rw-r--r--Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt8
-rw-r--r--Documentation/devicetree/bindings/sound/samsung-i2s.txt46
-rw-r--r--Documentation/devicetree/bindings/usb/atmel-usb.txt82
-rw-r--r--Documentation/devicetree/bindings/usb/ux500-usb.txt50
-rw-r--r--arch/arm/Kconfig47
-rw-r--r--arch/arm/boot/dts/dbx5x0.dtsi5
-rw-r--r--arch/arm/boot/dts/exynos4.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos4210-origen.dts2
-rw-r--r--arch/arm/boot/dts/exynos4210-smdkv310.dts2
-rw-r--r--arch/arm/boot/dts/exynos4210-trats.dts2
-rw-r--r--arch/arm/boot/dts/exynos4210-universal_c210.dts2
-rw-r--r--arch/arm/boot/dts/exynos4210.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos4212.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos4412-odroidx.dts2
-rw-r--r--arch/arm/boot/dts/exynos4412-origen.dts2
-rw-r--r--arch/arm/boot/dts/exynos4412-smdk4412.dts2
-rw-r--r--arch/arm/boot/dts/exynos4412.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos4x12.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos5250-arndale.dts2
-rw-r--r--arch/arm/boot/dts/exynos5250-smdk5250.dts2
-rw-r--r--arch/arm/boot/dts/exynos5250-snow.dts4
-rw-r--r--arch/arm/boot/dts/exynos5250.dtsi20
-rw-r--r--arch/arm/boot/dts/exynos5440-sd5v1.dts2
-rw-r--r--arch/arm/boot/dts/exynos5440-ssdk5440.dts2
-rw-r--r--arch/arm/boot/dts/exynos5440.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3430-sdp.dts1
-rw-r--r--arch/arm/boot/dts/s3c2416-smdk2416.dts2
-rw-r--r--arch/arm/boot/dts/s3c2416.dtsi4
-rw-r--r--arch/arm/boot/dts/s3c24xx.dtsi2
-rw-r--r--arch/arm/boot/dts/snowball.dts13
-rw-r--r--arch/arm/configs/omap1_defconfig3
-rw-r--r--arch/arm/mach-omap1/Makefile4
-rw-r--r--arch/arm/mach-omap2/Makefile3
-rw-r--r--arch/arm/mach-omap2/board-flash.c3
-rw-r--r--arch/arm/mach-omap2/devices.c13
-rw-r--r--arch/arm/mach-omap2/gpmc-nand.c44
-rw-r--r--arch/arm/mach-omap2/gpmc.c82
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2420_data.c14
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2430_data.c13
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c13
-rw-r--r--arch/arm/mach-s3c24xx/Kconfig66
-rw-r--r--arch/arm/mach-s3c24xx/Makefile6
-rw-r--r--arch/arm/mach-s3c24xx/include/mach/s3c2412.h (renamed from arch/arm/mach-s3c24xx/s3c2412.h)0
-rw-r--r--arch/arm/mach-s3c24xx/iotiming-s3c2412.c2
-rw-r--r--arch/arm/mach-ux500/board-mop500-audio.c68
-rw-r--r--arch/arm/mach-ux500/board-mop500-sdi.c56
-rw-r--r--arch/arm/mach-ux500/board-mop500.c94
-rw-r--r--arch/arm/mach-ux500/board-mop500.h2
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c66
-rw-r--r--arch/arm/mach-ux500/devices-db8500.c123
-rw-r--r--arch/arm/mach-ux500/ste-dma40-db8500.h193
-rw-r--r--arch/arm/mach-ux500/usb.c47
-rw-r--r--arch/arm/plat-omap/Kconfig16
-rw-r--r--arch/arm/plat-omap/Makefile3
-rw-r--r--arch/arm/plat-samsung/include/plat/cpu-freq-core.h10
-rw-r--r--arch/arm/plat-samsung/include/plat/cpu-freq.h6
-rw-r--r--drivers/clk/samsung/Makefile1
-rw-r--r--drivers/clk/samsung/clk-exynos-audss.c133
-rw-r--r--drivers/clk/samsung/clk-exynos5250.c5
-rw-r--r--drivers/clocksource/clksrc-dbx500-prcmu.c11
-rw-r--r--drivers/cpufreq/Kconfig.arm58
-rw-r--r--drivers/cpufreq/Makefile5
-rw-r--r--drivers/cpufreq/s3c2410-cpufreq.c (renamed from arch/arm/mach-s3c24xx/cpufreq-s3c2410.c)0
-rw-r--r--drivers/cpufreq/s3c2412-cpufreq.c (renamed from arch/arm/mach-s3c24xx/cpufreq-s3c2412.c)3
-rw-r--r--drivers/cpufreq/s3c2440-cpufreq.c (renamed from arch/arm/mach-s3c24xx/cpufreq-s3c2440.c)0
-rw-r--r--drivers/cpufreq/s3c24xx-cpufreq-debugfs.c (renamed from arch/arm/mach-s3c24xx/cpufreq-debugfs.c)0
-rw-r--r--drivers/cpufreq/s3c24xx-cpufreq.c (renamed from arch/arm/mach-s3c24xx/cpufreq.c)0
-rw-r--r--drivers/crypto/ux500/cryp/cryp.c4
-rw-r--r--drivers/crypto/ux500/cryp/cryp.h7
-rw-r--r--drivers/crypto/ux500/cryp/cryp_core.c57
-rw-r--r--drivers/crypto/ux500/hash/hash_alg.h5
-rw-r--r--drivers/crypto/ux500/hash/hash_core.c57
-rw-r--r--drivers/dma/ste_dma40.c533
-rw-r--r--drivers/dma/ste_dma40_ll.c189
-rw-r--r--drivers/dma/ste_dma40_ll.h3
-rw-r--r--drivers/gpio/gpio-rcar.c63
-rw-r--r--drivers/gpio/gpio-samsung.c67
-rw-r--r--drivers/mailbox/Kconfig34
-rw-r--r--drivers/mailbox/Makefile6
-rw-r--r--drivers/mailbox/mailbox-omap1.c (renamed from arch/arm/mach-omap1/mailbox.c)12
-rw-r--r--drivers/mailbox/mailbox-omap2.c (renamed from arch/arm/mach-omap2/mailbox.c)276
-rw-r--r--drivers/mailbox/omap-mailbox.c (renamed from arch/arm/plat-omap/mailbox.c)54
-rw-r--r--drivers/mailbox/omap-mbox.h (renamed from arch/arm/plat-omap/include/plat/mailbox.h)70
-rw-r--r--drivers/pinctrl/Kconfig5
-rw-r--r--drivers/pinctrl/Makefile1
-rw-r--r--drivers/pinctrl/pinctrl-s3c24xx.c651
-rw-r--r--drivers/pinctrl/pinctrl-samsung.c10
-rw-r--r--drivers/pinctrl/pinctrl-samsung.h4
-rw-r--r--drivers/pinctrl/sh-pfc/pfc-r8a73a4.c198
-rw-r--r--drivers/pinctrl/sh-pfc/pfc-r8a7778.c4
-rw-r--r--drivers/pinctrl/sh-pfc/pfc-r8a7790.c227
-rw-r--r--drivers/remoteproc/Kconfig3
-rw-r--r--drivers/remoteproc/omap_remoteproc.c2
-rw-r--r--drivers/staging/tidspbridge/Kconfig3
-rw-r--r--drivers/staging/tidspbridge/include/dspbridge/host_os.h2
-rw-r--r--drivers/usb/gadget/Kconfig2
-rw-r--r--drivers/usb/gadget/atmel_usba_udc.c264
-rw-r--r--drivers/usb/gadget/atmel_usba_udc.h2
-rw-r--r--drivers/usb/musb/ux500.c61
-rw-r--r--drivers/usb/musb/ux500_dma.c59
-rw-r--r--include/dt-bindings/clk/exynos-audss-clk.h25
-rw-r--r--include/linux/omap-mailbox.h29
-rw-r--r--include/linux/platform_data/dma-ste-dma40.h41
-rw-r--r--include/linux/platform_data/mailbox-omap.h58
-rw-r--r--include/linux/platform_data/usb-musb-ux500.h5
-rw-r--r--sound/soc/ux500/ux500_pcm.c10
112 files changed, 3168 insertions, 1651 deletions
diff --git a/Documentation/devicetree/bindings/bus/ti-gpmc.txt b/Documentation/devicetree/bindings/bus/ti-gpmc.txt
index 4b87ea1194e3..704be9306c9f 100644
--- a/Documentation/devicetree/bindings/bus/ti-gpmc.txt
+++ b/Documentation/devicetree/bindings/bus/ti-gpmc.txt
@@ -95,7 +95,6 @@ GPMC chip-select settings properties for child nodes. All are optional.
- gpmc,burst-wrap Enables wrap bursting
- gpmc,burst-read Enables read page/burst mode
- gpmc,burst-write Enables write page/burst mode
-- gpmc,device-nand Device is NAND
- gpmc,device-width Total width of device(s) connected to a GPMC
chip-select in bytes. The GPMC supports 8-bit
and 16-bit devices and so this property must be
diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
new file mode 100644
index 000000000000..a1201802f90d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
@@ -0,0 +1,64 @@
+* Samsung Audio Subsystem Clock Controller
+
+The Samsung Audio Subsystem clock controller generates and supplies clocks
+to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock
+binding described here is applicable to all SoC's in Exynos family.
+
+Required Properties:
+
+- compatible: should be one of the following:
+ - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs.
+ - "samsung,exynos5250-audss-clock" - controller compatible with all Exynos5 SoCs.
+
+- reg: physical base address and length of the controller's register set.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume. Some of the clocks are available only on a particular
+Exynos4 SoC and this is specified where applicable.
+
+Provided clocks:
+
+Clock ID SoC (if specific)
+-----------------------------------------------
+
+mout_audss 0
+mout_i2s 1
+dout_srp 2
+dout_aud_bus 3
+dout_i2s 4
+srp_clk 5
+i2s_bus 6
+sclk_i2s 7
+pcm_bus 8
+sclk_pcm 9
+
+Example 1: An example of a clock controller node is listed below.
+
+clock_audss: audss-clock-controller@3810000 {
+ compatible = "samsung,exynos5250-audss-clock";
+ reg = <0x03810000 0x0C>;
+ #clock-cells = <1>;
+};
+
+Example 2: I2S controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+i2s0: i2s@03830000 {
+ compatible = "samsung,i2s-v5";
+ reg = <0x03830000 0x100>;
+ dmas = <&pdma0 10
+ &pdma0 9
+ &pdma0 8>;
+ dma-names = "tx", "rx", "tx-sec";
+ clocks = <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_SCLK_I2S>,
+ <&clock_audss EXYNOS_MOUT_AUDSS>,
+ <&clock_audss EXYNOS_MOUT_I2S>;
+ clock-names = "iis", "i2s_opclk0", "i2s_opclk1",
+ "mout_audss", "mout_i2s";
+};
diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt
new file mode 100644
index 000000000000..bea5b73a7390
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt
@@ -0,0 +1,66 @@
+* DMA40 DMA Controller
+
+Required properties:
+- compatible: "stericsson,dma40"
+- reg: Address range of the DMAC registers
+- reg-names: Names of the above areas to use during resource look-up
+- interrupt: Should contain the DMAC interrupt number
+- #dma-cells: must be <3>
+- memcpy-channels: Channels to be used for memcpy
+
+Optional properties:
+- dma-channels: Number of channels supported by hardware - if not present
+ the driver will attempt to obtain the information from H/W
+- disabled-channels: Channels which can not be used
+
+Example:
+
+ dma: dma-controller@801C0000 {
+ compatible = "stericsson,db8500-dma40", "stericsson,dma40";
+ reg = <0x801C0000 0x1000 0x40010000 0x800>;
+ reg-names = "base", "lcpa";
+ interrupt-parent = <&intc>;
+ interrupts = <0 25 0x4>;
+
+ #dma-cells = <2>;
+ memcpy-channels = <56 57 58 59 60>;
+ disabled-channels = <12>;
+ dma-channels = <8>;
+ };
+
+Clients
+Required properties:
+- dmas: Comma separated list of dma channel requests
+- dma-names: Names of the aforementioned requested channels
+
+Each dmas request consists of 4 cells:
+ 1. A phandle pointing to the DMA controller
+ 2. Device Type
+ 3. The DMA request line number (only when 'use fixed channel' is set)
+ 4. A 32bit mask specifying; mode, direction and endianess [NB: This list will grow]
+ 0x00000001: Mode:
+ Logical channel when unset
+ Physical channel when set
+ 0x00000002: Direction:
+ Memory to Device when unset
+ Device to Memory when set
+ 0x00000004: Endianess:
+ Little endian when unset
+ Big endian when set
+ 0x00000008: Use fixed channel:
+ Use automatic channel selection when unset
+ Use DMA request line number when set
+
+Example:
+
+ uart@80120000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80120000 0x1000>;
+ interrupts = <0 11 0x4>;
+
+ dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
+ <&dma 13 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "rx";
+
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
index f1e5dfecf55d..5375625e8cd2 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
@@ -39,46 +39,3 @@ Example:
#gpio-cells = <4>;
gpio-controller;
};
-
-
-Samsung S3C24XX GPIO Controller
-
-Required properties:
-- compatible: Compatible property value should be "samsung,s3c24xx-gpio".
-
-- reg: Physical base address of the controller and length of memory mapped
- region.
-
-- #gpio-cells: Should be 3. The syntax of the gpio specifier used by client nodes
- should be the following with values derived from the SoC user manual.
- <[phandle of the gpio controller node]
- [pin number within the gpio controller]
- [mux function]
- [flags and pull up/down]
-
- Values for gpio specifier:
- - Pin number: depending on the controller a number from 0 up to 15.
- - Mux function: Depending on the SoC and the gpio bank the gpio can be set
- as input, output or a special function
- - Flags and Pull Up/Down: the values to use differ for the individual SoCs
- example S3C2416/S3C2450:
- 0 - Pull Up/Down Disabled.
- 1 - Pull Down Enabled.
- 2 - Pull Up Enabled.
- Bit 16 (0x00010000) - Input is active low.
- Consult the user manual for the correct values of Mux and Pull Up/Down.
-
-- gpio-controller: Specifies that the node is a gpio controller.
-- #address-cells: should be 1.
-- #size-cells: should be 1.
-
-Example:
-
- gpa: gpio-controller@56000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "samsung,s3c24xx-gpio";
- reg = <0x56000000 0x10>;
- #gpio-cells = <3>;
- gpio-controller;
- };
diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
new file mode 100644
index 000000000000..cb3dc7bcd8e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
@@ -0,0 +1,46 @@
+* Renesas R-Car GPIO Controller
+
+Required Properties:
+
+ - compatible: should be one of the following.
+ - "renesas,gpio-r8a7778": for R8A7778 (R-Mobile M1) compatible GPIO controller.
+ - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller.
+ - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller.
+ - "renesas,gpio-rcar": for generic R-Car GPIO controller.
+
+ - reg: Base address and length of each memory resource used by the GPIO
+ controller hardware module.
+
+ - interrupt-parent: phandle of the parent interrupt controller.
+ - interrupts: Interrupt specifier for the controllers interrupt.
+
+ - gpio-controller: Marks the device node as a gpio controller.
+ - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
+ cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
+ GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
+ - gpio-ranges: Range of pins managed by the GPIO controller.
+
+Please refer to gpio.txt in this directory for details of gpio-ranges property
+and the common GPIO bindings used by client devices.
+
+Example: R8A7779 (R-Car H1) GPIO controller nodes
+
+ gpio0: gpio@ffc40000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc40000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 141 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ };
+ ...
+ gpio6: gpio@ffc46000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc46000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 147 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 9>;
+ };
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index 6a983c1d87cd..df338cb5059c 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -29,6 +29,13 @@ Optional properties:
"bch4" 4-bit BCH ecc code
"bch8" 8-bit BCH ecc code
+ - ti,nand-xfer-type: A string setting the data transfer type. One of:
+
+ "prefetch-polled" Prefetch polled mode (default)
+ "polled" Polled mode, without prefetch
+ "prefetch-dma" Prefetch enabled sDMA mode
+ "prefetch-irq" Prefetch enabled irq mode
+
- elm_id: Specifies elm device node. This is required to support BCH
error correction using ELM module.
@@ -55,6 +62,7 @@ Example for an AM33xx board:
reg = <0 0 0>; /* CS0, offset 0 */
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
+ ti,nand-xfer-type = "polled";
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index e15cfc4bb39e..72e9cd1e89b7 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -7,6 +7,10 @@ on-chip controllers onto these pads.
Required Properties:
- compatible: should be one of the following.
+ - "samsung,s3c2412-pinctrl": for S3C2412-compatible pin-controller,
+ - "samsung,s3c2416-pinctrl": for S3C2416-compatible pin-controller,
+ - "samsung,s3c2440-pinctrl": for S3C2440-compatible pin-controller,
+ - "samsung,s3c2450-pinctrl": for S3C2450-compatible pin-controller,
- "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller,
- "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
- "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
@@ -116,6 +120,10 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
- compatible: identifies the type of the external wakeup interrupt controller
The possible values are:
+ - samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller
+ found on Samsung S3C24xx SoCs except S3C2412 and S3C2413,
+ - samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller
+ found on Samsung S3C2412 and S3C2413 SoCs,
- samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller
found on Samsung S3C64xx SoCs,
- samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
index 3070046da2e5..025e66b85a43 100644
--- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
@@ -8,6 +8,16 @@ Required SoC Specific Properties:
- dmas: list of DMA controller phandle and DMA request line ordered pairs.
- dma-names: identifier string for each DMA request line in the dmas property.
These strings correspond 1:1 with the ordered pairs in dmas.
+- clocks: Handle to iis clock and RCLK source clk.
+- clock-names:
+ i2s0 uses some base clks from CMU and some are from audio subsystem internal
+ clock controller. The clock names for i2s0 should be "iis", "i2s_opclk0" and
+ "i2s_opclk1" as shown in the example below.
+ i2s1 and i2s2 uses clocks from CMU. The clock names for i2s1 and i2s2 should
+ be "iis" and "i2s_opclk0".
+ "iis" is the i2s bus clock and i2s_opclk0, i2s_opclk1 are sources of the root
+ clk. i2s0 has internal mux to select the source of root clk and i2s1 and i2s2
+ doesn't have any such mux.
Optional SoC Specific Properties:
@@ -20,44 +30,26 @@ Optional SoC Specific Properties:
then this flag is enabled.
- samsung,idma-addr: Internal DMA register base address of the audio
sub system(used in secondary sound source).
-
-Required Board Specific Properties:
-
-- gpios: The gpio specifier for data out,data in, LRCLK, CDCLK and SCLK
- interface lines. The format of the gpio specifier depends on the gpio
- controller.
- The syntax of samsung gpio specifier is
- <[phandle of the gpio controller node]
- [pin number within the gpio controller]
- [mux function]
- [flags and pull up/down]
- [drive strength]>
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".
Example:
-- SoC Specific Portion:
-
-i2s@03830000 {
+i2s0: i2s@03830000 {
compatible = "samsung,i2s-v5";
reg = <0x03830000 0x100>;
dmas = <&pdma0 10
&pdma0 9
&pdma0 8>;
dma-names = "tx", "rx", "tx-sec";
+ clocks = <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_SCLK_I2S>;
+ clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
samsung,supports-6ch;
samsung,supports-rstclr;
samsung,supports-secdai;
samsung,idma-addr = <0x03000000>;
-};
-
-- Board Specific Portion:
-
-i2s@03830000 {
- gpios = <&gpz 0 2 0 0>, /* I2S_0_SCLK */
- <&gpz 1 2 0 0>, /* I2S_0_CDCLK */
- <&gpz 2 2 0 0>, /* I2S_0_LRCK */
- <&gpz 3 2 0 0>, /* I2S_0_SDI */
- <&gpz 4 2 0 0>, /* I2S_0_SDO[1] */
- <&gpz 5 2 0 0>, /* I2S_0_SDO[2] */
- <&gpz 6 2 0 0>; /* I2S_0_SDO[3] */
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
};
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index 60bd2150a3e6..55f51af08bc7 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -47,3 +47,85 @@ usb1: gadget@fffa4000 {
interrupts = <10 4>;
atmel,vbus-gpio = <&pioC 5 0>;
};
+
+Atmel High-Speed USB device controller
+
+Required properties:
+ - compatible: Should be "atmel,at91sam9rl-udc"
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain usba interrupt
+ - ep childnode: To specify the number of endpoints and their properties.
+
+Optional properties:
+ - atmel,vbus-gpio: If present, specifies a gpio that needs to be
+ activated for the bus to be powered.
+
+Required child node properties:
+ - name: Name of the endpoint.
+ - reg: Num of the endpoint.
+ - atmel,fifo-size: Size of the fifo.
+ - atmel,nb-banks: Number of banks.
+ - atmel,can-dma: Boolean to specify if the endpoint support DMA.
+ - atmel,can-isoc: Boolean to specify if the endpoint support ISOC.
+
+usb2: gadget@fff78000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91sam9rl-udc";
+ reg = <0x00600000 0x80000
+ 0xfff78000 0x400>;
+ interrupts = <27 4 0>;
+ atmel,vbus-gpio = <&pioB 19 0>;
+
+ ep0 {
+ reg = <0>;
+ atmel,fifo-size = <64>;
+ atmel,nb-banks = <1>;
+ };
+
+ ep1 {
+ reg = <1>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep2 {
+ reg = <2>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep3 {
+ reg = <3>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ };
+
+ ep4 {
+ reg = <4>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ };
+
+ ep5 {
+ reg = <5>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep6 {
+ reg = <6>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+};
diff --git a/Documentation/devicetree/bindings/usb/ux500-usb.txt b/Documentation/devicetree/bindings/usb/ux500-usb.txt
new file mode 100644
index 000000000000..330d6ec15401
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ux500-usb.txt
@@ -0,0 +1,50 @@
+Ux500 MUSB
+
+Required properties:
+ - compatible : Should be "stericsson,db8500-musb"
+ - reg : Offset and length of registers
+ - interrupts : Interrupt; mode, number and trigger
+ - dr_mode : Dual-role; either host mode "host", peripheral mode "peripheral"
+ or both "otg"
+
+Optional properties:
+ - dmas : A list of dma channels;
+ dma-controller, event-line, fixed-channel, flags
+ - dma-names : An ordered list of channel names affiliated to the above
+
+Example:
+
+usb_per5@a03e0000 {
+ compatible = "stericsson,db8500-musb", "mentor,musb";
+ reg = <0xa03e0000 0x10000>;
+ interrupts = <0 23 0x4>;
+ interrupt-names = "mc";
+
+ dr_mode = "otg";
+
+ dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
+ <&dma 38 0 0x0>, /* Logical - MemToDev */
+ <&dma 37 0 0x2>, /* Logical - DevToMem */
+ <&dma 37 0 0x0>, /* Logical - MemToDev */
+ <&dma 36 0 0x2>, /* Logical - DevToMem */
+ <&dma 36 0 0x0>, /* Logical - MemToDev */
+ <&dma 19 0 0x2>, /* Logical - DevToMem */
+ <&dma 19 0 0x0>, /* Logical - MemToDev */
+ <&dma 18 0 0x2>, /* Logical - DevToMem */
+ <&dma 18 0 0x0>, /* Logical - MemToDev */
+ <&dma 17 0 0x2>, /* Logical - DevToMem */
+ <&dma 17 0 0x0>, /* Logical - MemToDev */
+ <&dma 16 0 0x2>, /* Logical - DevToMem */
+ <&dma 16 0 0x0>, /* Logical - MemToDev */
+ <&dma 39 0 0x2>, /* Logical - DevToMem */
+ <&dma 39 0 0x0>; /* Logical - MemToDev */
+
+ dma-names = "iep_1_9", "oep_1_9",
+ "iep_2_10", "oep_2_10",
+ "iep_3_11", "oep_3_11",
+ "iep_4_12", "oep_4_12",
+ "iep_5_13", "oep_5_13",
+ "iep_6_14", "oep_6_14",
+ "iep_7_15", "oep_7_15",
+ "iep_8", "oep_8";
+};
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7a13c2cd7a86..49fdc432512f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2087,53 +2087,6 @@ menu "CPU Power Management"
if ARCH_HAS_CPUFREQ
source "drivers/cpufreq/Kconfig"
-
-config CPU_FREQ_S3C
- bool
- help
- Internal configuration node for common cpufreq on Samsung SoC
-
-config CPU_FREQ_S3C24XX
- bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
- depends on ARCH_S3C24XX && CPU_FREQ
- select CPU_FREQ_S3C
- help
- This enables the CPUfreq driver for the Samsung S3C24XX family
- of CPUs.
-
- For details, take a look at <file:Documentation/cpu-freq>.
-
- If in doubt, say N.
-
-config CPU_FREQ_S3C24XX_PLL
- bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
- depends on CPU_FREQ_S3C24XX
- help
- Compile in support for changing the PLL frequency from the
- S3C24XX series CPUfreq driver. The PLL takes time to settle
- after a frequency change, so by default it is not enabled.
-
- This also means that the PLL tables for the selected CPU(s) will
- be built which may increase the size of the kernel image.
-
-config CPU_FREQ_S3C24XX_DEBUG
- bool "Debug CPUfreq Samsung driver core"
- depends on CPU_FREQ_S3C24XX
- help
- Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
-
-config CPU_FREQ_S3C24XX_IODEBUG
- bool "Debug CPUfreq Samsung driver IO timing"
- depends on CPU_FREQ_S3C24XX
- help
- Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
-
-config CPU_FREQ_S3C24XX_DEBUGFS
- bool "Export debugfs for CPUFreq"
- depends on CPU_FREQ_S3C24XX && DEBUG_FS
- help
- Export status information via debugfs.
-
endif
source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index a082f0ba1ddb..a1529455f081 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -360,6 +360,11 @@
interrupt-controller;
#interrupt-cells = <2>;
+ ab8500_gpio: ab8500-gpio {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
ab8500-rtc {
compatible = "stericsson,ab8500-rtc";
interrupts = <17 IRQ_TYPE_LEVEL_HIGH
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index bed40ee2e4f6..3f94fe8e3706 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -19,7 +19,7 @@
* published by the Free Software Foundation.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
/ {
interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 08609b8bdaf1..382d8c7e2906 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -15,7 +15,7 @@
*/
/dts-v1/;
-/include/ "exynos4210.dtsi"
+#include "exynos4210.dtsi"
/ {
model = "Insignal Origen evaluation board based on Exynos4210";
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 91332b72acf5..9c01b718d29d 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -15,7 +15,7 @@
*/
/dts-v1/;
-/include/ "exynos4210.dtsi"
+#include "exynos4210.dtsi"
/ {
model = "Samsung smdkv310 evaluation board based on Exynos4210";
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 9a14484c7bb1..94eebffe3044 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -13,7 +13,7 @@
*/
/dts-v1/;
-/include/ "exynos4210.dtsi"
+#include "exynos4210.dtsi"
/ {
model = "Samsung Trats based on Exynos4210";
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 345cdb51dcb7..889cdada1ce9 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -13,7 +13,7 @@
*/
/dts-v1/;
-/include/ "exynos4210.dtsi"
+#include "exynos4210.dtsi"
/ {
model = "Samsung Universal C210 based on Exynos4210 rev0";
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index d4f8067e89ba..b7f358a93bcb 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -19,8 +19,8 @@
* published by the Free Software Foundation.
*/
-/include/ "exynos4.dtsi"
-/include/ "exynos4210-pinctrl.dtsi"
+#include "exynos4.dtsi"
+#include "exynos4210-pinctrl.dtsi"
/ {
compatible = "samsung,exynos4210";
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index c0f60f49cea6..6f34d7f6ba7e 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -17,7 +17,7 @@
* published by the Free Software Foundation.
*/
-/include/ "exynos4x12.dtsi"
+#include "exynos4x12.dtsi"
/ {
compatible = "samsung,exynos4212";
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 867d9452619b..46c678ee119c 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -12,7 +12,7 @@
*/
/dts-v1/;
-/include/ "exynos4412.dtsi"
+#include "exynos4412.dtsi"
/ {
model = "Hardkernel ODROID-X board based on Exynos4412";
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index ca73c42f77e1..7993641cb32a 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -13,7 +13,7 @@
*/
/dts-v1/;
-/include/ "exynos4412.dtsi"
+#include "exynos4412.dtsi"
/ {
model = "Insignal Origen evaluation board based on Exynos4412";
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index a8ba195c41ac..ad316a1ee9e0 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -13,7 +13,7 @@
*/
/dts-v1/;
-/include/ "exynos4412.dtsi"
+#include "exynos4412.dtsi"
/ {
model = "Samsung SMDK evaluation board based on Exynos4412";
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 270b389e0a1b..e743e677a9e2 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -17,7 +17,7 @@
* published by the Free Software Foundation.
*/
-/include/ "exynos4x12.dtsi"
+#include "exynos4x12.dtsi"
/ {
compatible = "samsung,exynos4412";
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 35cb2099d55e..01da194ba329 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -17,8 +17,8 @@
* published by the Free Software Foundation.
*/
-/include/ "exynos4.dtsi"
-/include/ "exynos4x12-pinctrl.dtsi"
+#include "exynos4.dtsi"
+#include "exynos4x12-pinctrl.dtsi"
/ {
aliases {
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index c6db281a3430..abc7272c7afd 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-/include/ "exynos5250.dtsi"
+#include "exynos5250.dtsi"
/ {
model = "Insignal Arndale evaluation board based on EXYNOS5250";
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 1e21200b6d85..35a66dee4011 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-/include/ "exynos5250.dtsi"
+#include "exynos5250.dtsi"
/ {
model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 05244f150dd9..e79331dba12d 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -9,8 +9,8 @@
*/
/dts-v1/;
-/include/ "exynos5250.dtsi"
-/include/ "cros5250-common.dtsi"
+#include "exynos5250.dtsi"
+#include "cros5250-common.dtsi"
/ {
model = "Google Snow";
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 54a35e64c781..964158c1844f 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -17,8 +17,10 @@
* published by the Free Software Foundation.
*/
-/include/ "skeleton.dtsi"
-/include/ "exynos5250-pinctrl.dtsi"
+#include "skeleton.dtsi"
+#include "exynos5250-pinctrl.dtsi"
+
+#include <dt-bindings/clk/exynos-audss-clk.h>
/ {
compatible = "samsung,exynos5250";
@@ -72,6 +74,12 @@
#clock-cells = <1>;
};
+ clock_audss: audss-clock-controller@3810000 {
+ compatible = "samsung,exynos5250-audss-clock";
+ reg = <0x03810000 0x0C>;
+ #clock-cells = <1>;
+ };
+
gic:interrupt-controller@10481000 {
compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@@ -451,6 +459,10 @@
&pdma0 9
&pdma0 8>;
dma-names = "tx", "rx", "tx-sec";
+ clocks = <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_SCLK_I2S>;
+ clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
samsung,supports-6ch;
samsung,supports-rstclr;
samsung,supports-secdai;
@@ -465,6 +477,8 @@
dmas = <&pdma1 12
&pdma1 11>;
dma-names = "tx", "rx";
+ clocks = <&clock 307>, <&clock 157>;
+ clock-names = "iis", "i2s_opclk0";
pinctrl-names = "default";
pinctrl-0 = <&i2s1_bus>;
};
@@ -475,6 +489,8 @@
dmas = <&pdma0 12
&pdma0 11>;
dma-names = "tx", "rx";
+ clocks = <&clock 308>, <&clock 158>;
+ clock-names = "iis", "i2s_opclk0";
pinctrl-names = "default";
pinctrl-0 = <&i2s2_bus>;
};
diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
index f722a0263ac8..5b22508050da 100644
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-/include/ "exynos5440.dtsi"
+#include "exynos5440.dtsi"
/ {
model = "SAMSUNG SD5v1 board based on EXYNOS5440";
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index ba88cfd2486f..ede772741f81 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-/include/ "exynos5440.dtsi"
+#include "exynos5440.dtsi"
/ {
model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index bfcb907b7e33..ff7f5d855845 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -9,7 +9,7 @@
* published by the Free Software Foundation.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
/ {
compatible = "samsung,exynos5440";
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index c4a1c0a97728..e2249bcc3e63 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -106,7 +106,6 @@
nand-bus-width = <8>;
ti,nand-ecc-opt = "sw";
- gpmc,device-nand;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <36>;
gpmc,cs-wr-off-ns = <36>;
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index ad1dd09c10eb..59594cf15998 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -9,7 +9,7 @@
*/
/dts-v1/;
-/include/ "s3c2416.dtsi"
+#include "s3c2416.dtsi"
/ {
model = "SMDK2416";
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index 6809324934a3..e6555bdd81b8 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -8,8 +8,8 @@
* published by the Free Software Foundation.
*/
-/include/ "s3c24xx.dtsi"
-/include/ "s3c2416-pinctrl.dtsi"
+#include "s3c24xx.dtsi"
+#include "s3c2416-pinctrl.dtsi"
/ {
model = "Samsung S3C2416 SoC";
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
index cab46ff5fb4d..2d1d7dc9418a 100644
--- a/arch/arm/boot/dts/s3c24xx.dtsi
+++ b/arch/arm/boot/dts/s3c24xx.dtsi
@@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
/ {
compatible = "samsung,s3c24xx";
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index fb9dce529da6..49824be66845 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -22,12 +22,13 @@
en_3v3_reg: en_3v3 {
compatible = "regulator-fixed";
- regulator-name = "en-3v3-fixed-supply";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpios = <&gpio0 26 0x4>; // 26
- startup-delay-us = <5000>;
- enable-active-high;
+ regulator-name = "en-3v3-fixed-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
+ gpio = <&ab8500_gpio 25 0x4>;
+ startup-delay-us = <5000>;
+ enable-active-high;
};
gpio_keys {
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 9940f7b4e438..d74edbad18fc 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -26,7 +26,8 @@ CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_OMAP_RESET_CLOCKS=y
# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MBOX_FWK=y
+CONFIG_MAILBOX=y
+CONFIG_OMAP1_MBOX=y
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_DM_TIMER=y
CONFIG_ARCH_OMAP730=y
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 222d58c0ae76..3889b6cd211e 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -19,10 +19,6 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o
-# DSP
-obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
-mailbox_mach-objs := mailbox.o
-
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
obj-y += $(i2c-omap-m) $(i2c-omap-y)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8e8c605ebefe..ea5a27ff9941 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -212,9 +212,6 @@ obj-$(CONFIG_SOC_OMAP5) += omap_hwmod_54xx_data.o
obj-$(CONFIG_OMAP3_EMU) += emu.o
obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o
-obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
-mailbox_mach-objs := mailbox.o
-
iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o
obj-y += $(iommu-m) $(iommu-y)
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index c33adea0247c..fc20a61f6b2a 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -112,6 +112,9 @@ struct gpmc_timings nand_default_timings[1] = {
.cs_rd_off = 36,
.cs_wr_off = 36,
+ .we_on = 6,
+ .oe_on = 6,
+
.adv_on = 6,
.adv_rd_off = 24,
.adv_wr_off = 36,
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 403c211e35d0..aef96e45cb20 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -21,6 +21,7 @@
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/omap4-keypad.h>
#include <linux/wl12xx.h>
+#include <linux/platform_data/mailbox-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
@@ -283,25 +284,31 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
return 0;
}
-#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
+#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
static inline void __init omap_init_mbox(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
+ struct omap_mbox_pdata *pdata;
oh = omap_hwmod_lookup("mailbox");
if (!oh) {
pr_err("%s: unable to find hwmod\n", __func__);
return;
}
+ if (!oh->dev_attr) {
+ pr_err("%s: hwmod doesn't have valid attrs\n", __func__);
+ return;
+ }
- pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0);
+ pdata = (struct omap_mbox_pdata *)oh->dev_attr;
+ pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata));
WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
__func__, PTR_ERR(pdev));
}
#else
static inline void omap_init_mbox(void) { }
-#endif /* CONFIG_OMAP_MBOX_FWK */
+#endif /* CONFIG_OMAP2PLUS_MBOX */
static inline void omap_init_sti(void) {}
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index d9c27195caf0..662c7fd633cc 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -43,44 +43,6 @@ static struct platform_device gpmc_nand_device = {
.resource = gpmc_nand_resource,
};
-static int omap2_nand_gpmc_retime(
- struct omap_nand_platform_data *gpmc_nand_data,
- struct gpmc_timings *gpmc_t)
-{
- struct gpmc_timings t;
- int err;
-
- memset(&t, 0, sizeof(t));
- t.sync_clk = gpmc_t->sync_clk;
- t.cs_on = gpmc_t->cs_on;
- t.adv_on = gpmc_t->adv_on;
-
- /* Read */
- t.adv_rd_off = gpmc_t->adv_rd_off;
- t.oe_on = t.adv_on;
- t.access = gpmc_t->access;
- t.oe_off = gpmc_t->oe_off;
- t.cs_rd_off = gpmc_t->cs_rd_off;
- t.rd_cycle = gpmc_t->rd_cycle;
-
- /* Write */
- t.adv_wr_off = gpmc_t->adv_wr_off;
- t.we_on = t.oe_on;
- if (cpu_is_omap34xx()) {
- t.wr_data_mux_bus = gpmc_t->wr_data_mux_bus;
- t.wr_access = gpmc_t->wr_access;
- }
- t.we_off = gpmc_t->we_off;
- t.cs_wr_off = gpmc_t->cs_wr_off;
- t.wr_cycle = gpmc_t->wr_cycle;
-
- err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
- if (err)
- return err;
-
- return 0;
-}
-
static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
{
/* support only OMAP3 class */
@@ -131,7 +93,7 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
if (gpmc_t) {
- err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t);
+ err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t);
if (err < 0) {
dev_err(dev, "Unable to set gpmc timings: %d\n", err);
return err;
@@ -140,8 +102,6 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
if (gpmc_nand_data->of_node) {
gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
} else {
- s.device_nand = true;
-
/* Enable RD PIN Monitoring Reg */
if (gpmc_nand_data->dev_ready) {
s.wait_on_read = true;
@@ -149,6 +109,8 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
}
}
+ s.device_nand = true;
+
if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
s.device_width = GPMC_DEVWIDTH_16BIT;
else
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 6c4da1254f53..1c7969e965d7 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -30,6 +30,7 @@
#include <linux/of_mtd.h>
#include <linux/of_device.h>
#include <linux/mtd/nand.h>
+#include <linux/pm_runtime.h>
#include <linux/platform_data/mtd-nand-omap2.h>
@@ -155,6 +156,7 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
/* Define chip-selects as reserved by default until probe completes */
static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1);
+static unsigned int gpmc_cs_num = GPMC_CS_NUM;
static unsigned int gpmc_nr_waitpins;
static struct device *gpmc_dev;
static int gpmc_irq;
@@ -521,8 +523,10 @@ static int gpmc_cs_remap(int cs, u32 base)
int ret;
u32 old_base, size;
- if (cs > GPMC_CS_NUM)
+ if (cs > gpmc_cs_num) {
+ pr_err("%s: requested chip-select is disabled\n", __func__);
return -ENODEV;
+ }
gpmc_cs_get_memconf(cs, &old_base, &size);
if (base == old_base)
return 0;
@@ -545,9 +549,10 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
struct resource *res = &gpmc_cs_mem[cs];
int r = -1;
- if (cs > GPMC_CS_NUM)
+ if (cs > gpmc_cs_num) {
+ pr_err("%s: requested chip-select is disabled\n", __func__);
return -ENODEV;
-
+ }
size = gpmc_mem_align(size);
if (size > (1 << GPMC_SECTION_SHIFT))
return -ENOMEM;
@@ -582,7 +587,7 @@ EXPORT_SYMBOL(gpmc_cs_request);
void gpmc_cs_free(int cs)
{
spin_lock(&gpmc_mem_lock);
- if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) {
+ if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) {
printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
BUG();
spin_unlock(&gpmc_mem_lock);
@@ -777,7 +782,7 @@ static void gpmc_mem_exit(void)
{
int cs;
- for (cs = 0; cs < GPMC_CS_NUM; cs++) {
+ for (cs = 0; cs < gpmc_cs_num; cs++) {
if (!gpmc_cs_mem_enabled(cs))
continue;
gpmc_cs_delete_mem(cs);
@@ -798,7 +803,7 @@ static void gpmc_mem_init(void)
gpmc_mem_root.end = GPMC_MEM_END;
/* Reserve all regions that has been set up by bootloader */
- for (cs = 0; cs < GPMC_CS_NUM; cs++) {
+ for (cs = 0; cs < gpmc_cs_num; cs++) {
u32 base, size;
if (!gpmc_cs_mem_enabled(cs))
@@ -1245,7 +1250,6 @@ void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
p->sync_read = of_property_read_bool(np, "gpmc,sync-read");
p->sync_write = of_property_read_bool(np, "gpmc,sync-write");
- p->device_nand = of_property_read_bool(np, "gpmc,device-nand");
of_property_read_u32(np, "gpmc,device-width", &p->device_width);
of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data);
@@ -1345,6 +1349,13 @@ static const char * const nand_ecc_opts[] = {
[OMAP_ECC_BCH8_CODE_HW] = "bch8",
};
+static const char * const nand_xfer_types[] = {
+ [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
+ [NAND_OMAP_POLLED] = "polled",
+ [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma",
+ [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq",
+};
+
static int gpmc_probe_nand_child(struct platform_device *pdev,
struct device_node *child)
{
@@ -1374,6 +1385,13 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
break;
}
+ if (!of_property_read_string(child, "ti,nand-xfer-type", &s))
+ for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++)
+ if (!strcasecmp(s, nand_xfer_types[val])) {
+ gpmc_nand_data->xfer_type = val;
+ break;
+ }
+
val = of_get_nand_bus_width(child);
if (val == 16)
gpmc_nand_data->devsize = NAND_BUSWIDTH_16;
@@ -1513,6 +1531,20 @@ static int gpmc_probe_dt(struct platform_device *pdev)
if (!of_id)
return 0;
+ ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-cs",
+ &gpmc_cs_num);
+ if (ret < 0) {
+ pr_err("%s: number of chip-selects not defined\n", __func__);
+ return ret;
+ } else if (gpmc_cs_num < 1) {
+ pr_err("%s: all chip-selects are disabled\n", __func__);
+ return -EINVAL;
+ } else if (gpmc_cs_num > GPMC_CS_NUM) {
+ pr_err("%s: number of supported chip-selects cannot be > %d\n",
+ __func__, GPMC_CS_NUM);
+ return -EINVAL;
+ }
+
ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins",
&gpmc_nr_waitpins);
if (ret < 0) {
@@ -1577,7 +1609,8 @@ static int gpmc_probe(struct platform_device *pdev)
return PTR_ERR(gpmc_l3_clk);
}
- clk_prepare_enable(gpmc_l3_clk);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
gpmc_dev = &pdev->dev;
@@ -1610,12 +1643,14 @@ static int gpmc_probe(struct platform_device *pdev)
/* Now the GPMC is initialised, unreserve the chip-selects */
gpmc_cs_map = 0;
- if (!pdev->dev.of_node)
+ if (!pdev->dev.of_node) {
+ gpmc_cs_num = GPMC_CS_NUM;
gpmc_nr_waitpins = GPMC_NR_WAITPINS;
+ }
rc = gpmc_probe_dt(pdev);
if (rc < 0) {
- clk_disable_unprepare(gpmc_l3_clk);
+ pm_runtime_put_sync(&pdev->dev);
clk_put(gpmc_l3_clk);
dev_err(gpmc_dev, "failed to probe DT parameters\n");
return rc;
@@ -1628,10 +1663,30 @@ static int gpmc_remove(struct platform_device *pdev)
{
gpmc_free_irq();
gpmc_mem_exit();
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
gpmc_dev = NULL;
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int gpmc_suspend(struct device *dev)
+{
+ omap3_gpmc_save_context();
+ pm_runtime_put_sync(dev);
+ return 0;
+}
+
+static int gpmc_resume(struct device *dev)
+{
+ pm_runtime_get_sync(dev);
+ omap3_gpmc_restore_context();
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(gpmc_pm_ops, gpmc_suspend, gpmc_resume);
+
static struct platform_driver gpmc_driver = {
.probe = gpmc_probe,
.remove = gpmc_remove,
@@ -1639,6 +1694,7 @@ static struct platform_driver gpmc_driver = {
.name = DEVICE_NAME,
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(gpmc_dt_ids),
+ .pm = &gpmc_pm_ops,
},
};
@@ -1701,7 +1757,6 @@ static irqreturn_t gpmc_handle_irq(int irq, void *dev)
return IRQ_HANDLED;
}
-#ifdef CONFIG_ARCH_OMAP3
static struct omap3_gpmc_regs gpmc_context;
void omap3_gpmc_save_context(void)
@@ -1715,7 +1770,7 @@ void omap3_gpmc_save_context(void)
gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2);
gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL);
- for (i = 0; i < GPMC_CS_NUM; i++) {
+ for (i = 0; i < gpmc_cs_num; i++) {
gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i);
if (gpmc_context.cs_context[i].is_valid) {
gpmc_context.cs_context[i].config1 =
@@ -1747,7 +1802,7 @@ void omap3_gpmc_restore_context(void)
gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1);
gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2);
gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control);
- for (i = 0; i < GPMC_CS_NUM; i++) {
+ for (i = 0; i < gpmc_cs_num; i++) {
if (gpmc_context.cs_context[i].is_valid) {
gpmc_cs_write_reg(i, GPMC_CS_CONFIG1,
gpmc_context.cs_context[i].config1);
@@ -1766,4 +1821,3 @@ void omap3_gpmc_restore_context(void)
}
}
}
-#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 5137cc84b504..d8b9d60f854f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -16,6 +16,7 @@
#include <linux/i2c-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/omap-dma.h>
+#include <linux/platform_data/mailbox-omap.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
@@ -166,6 +167,18 @@ static struct omap_hwmod omap2420_dma_system_hwmod = {
};
/* mailbox */
+static struct omap_mbox_dev_info omap2420_mailbox_info[] = {
+ { .name = "dsp", .tx_id = 0, .rx_id = 1, .irq_id = 0, .usr_id = 0 },
+ { .name = "iva", .tx_id = 2, .rx_id = 3, .irq_id = 1, .usr_id = 3 },
+};
+
+static struct omap_mbox_pdata omap2420_mailbox_attrs = {
+ .num_users = 4,
+ .num_fifos = 6,
+ .info_cnt = ARRAY_SIZE(omap2420_mailbox_info),
+ .info = omap2420_mailbox_info,
+};
+
static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = {
{ .name = "dsp", .irq = 26 + OMAP_INTC_START, },
{ .name = "iva", .irq = 34 + OMAP_INTC_START, },
@@ -186,6 +199,7 @@ static struct omap_hwmod omap2420_mailbox_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
},
},
+ .dev_attr = &omap2420_mailbox_attrs,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 4ce999ee3ee9..5b9083461dc5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -17,6 +17,7 @@
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/omap-dma.h>
+#include <linux/platform_data/mailbox-omap.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
@@ -170,6 +171,17 @@ static struct omap_hwmod omap2430_dma_system_hwmod = {
};
/* mailbox */
+static struct omap_mbox_dev_info omap2430_mailbox_info[] = {
+ { .name = "dsp", .tx_id = 0, .rx_id = 1 },
+};
+
+static struct omap_mbox_pdata omap2430_mailbox_attrs = {
+ .num_users = 4,
+ .num_fifos = 6,
+ .info_cnt = ARRAY_SIZE(omap2430_mailbox_info),
+ .info = omap2430_mailbox_info,
+};
+
static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = {
{ .irq = 26 + OMAP_INTC_START, },
{ .irq = -1 },
@@ -189,6 +201,7 @@ static struct omap_hwmod omap2430_mailbox_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
},
},
+ .dev_attr = &omap2430_mailbox_attrs,
};
/* mcspi3 */
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index fa9915411440..f7a3df2fb579 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -25,6 +25,7 @@
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/iommu-omap.h>
+#include <linux/platform_data/mailbox-omap.h>
#include <plat/dmtimer.h>
#include "am35xx.h"
@@ -1504,6 +1505,17 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = {
.sysc = &omap3xxx_mailbox_sysc,
};
+static struct omap_mbox_dev_info omap3xxx_mailbox_info[] = {
+ { .name = "dsp", .tx_id = 0, .rx_id = 1 },
+};
+
+static struct omap_mbox_pdata omap3xxx_mailbox_attrs = {
+ .num_users = 2,
+ .num_fifos = 2,
+ .info_cnt = ARRAY_SIZE(omap3xxx_mailbox_info),
+ .info = omap3xxx_mailbox_info,
+};
+
static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = {
{ .irq = 26 + OMAP_INTC_START, },
{ .irq = -1 },
@@ -1523,6 +1535,7 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = {
.idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT,
},
},
+ .dev_attr = &omap3xxx_mailbox_attrs,
};
/*
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 0adb2b85f830..6d9252e081ce 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -28,7 +28,7 @@ config CPU_S3C2410
select CPU_ARM920T
select CPU_LLSERIAL_S3C2410
select S3C2410_CLOCK
- select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
+ select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
select S3C2410_PM if PM
select SAMSUNG_HRT
select SAMSUNG_WDT_RESET
@@ -206,27 +206,38 @@ config S3C24XX_GPIO_EXTRA128
Add an extra 128 gpio numbers to the available GPIO pool. This is
available for boards that need extra gpios for external devices.
+config S3C24XX_PLL
+ bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
+ depends on ARM_S3C24XX
+ help
+ Compile in support for changing the PLL frequency from the
+ S3C24XX series CPUfreq driver. The PLL takes time to settle
+ after a frequency change, so by default it is not enabled.
+
+ This also means that the PLL tables for the selected CPU(s) will
+ be built which may increase the size of the kernel image.
+
# cpu frequency items common between s3c2410 and s3c2440/s3c2442
config S3C2410_IOTIMING
bool
- depends on CPU_FREQ_S3C24XX
+ depends on ARM_S3C24XX_CPUFREQ
help
Internal node to select io timing code that is common to the s3c2410
and s3c2440/s3c2442 cpu frequency support.
config S3C2410_CPUFREQ_UTILS
- bool
- depends on CPU_FREQ_S3C24XX
- help
- Internal node to select timing code that is common to the s3c2410
- and s3c2440/s3c244 cpu frequency support.
+ bool
+ depends on ARM_S3C24XX_CPUFREQ
+ help
+ Internal node to select timing code that is common to the s3c2410
+ and s3c2440/s3c244 cpu frequency support.
# cpu frequency support common to s3c2412, s3c2413 and s3c2442
config S3C2412_IOTIMING
bool
- depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+ depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443)
help
Intel node to select io timing code that is common to the s3c2412
and the s3c2443.
@@ -235,16 +246,9 @@ config S3C2412_IOTIMING
if CPU_S3C2410
-config S3C2410_CPUFREQ
- bool
- depends on CPU_FREQ_S3C24XX
- select S3C2410_CPUFREQ_UTILS
- help
- CPU Frequency scaling support for S3C2410
-
config S3C2410_PLL
bool
- depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+ depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL
default y
help
Select the PLL table for the S3C2410
@@ -280,7 +284,7 @@ config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select ISA
select MACH_BAST_IDE
- select S3C2410_IOTIMING if S3C2410_CPUFREQ
+ select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
select S3C24XX_DCLK
select S3C24XX_SIMTEC_NOR
select S3C24XX_SIMTEC_PM if PM
@@ -387,14 +391,6 @@ config CPU_S3C2412_ONLY
!CPU_S3C2442 && !CPU_S3C2443
default y
-config S3C2412_CPUFREQ
- bool
- depends on CPU_FREQ_S3C24XX
- default y
- select S3C2412_IOTIMING
- help
- CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
-
config S3C2412_DMA
bool
help
@@ -508,14 +504,6 @@ endif # CPU_S3C2416
if CPU_S3C2440
-config S3C2440_CPUFREQ
- bool "S3C2440/S3C2442 CPU Frequency scaling support"
- depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
- default y
- select S3C2410_CPUFREQ_UTILS
- help
- CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
config S3C2440_DMA
bool
help
@@ -535,15 +523,15 @@ config S3C2440_XTAL_16934400
config S3C2440_PLL_12000000
bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
- default y if CPU_FREQ_S3C24XX_PLL
+ depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+ default y if S3C24XX_PLL
help
PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
config S3C2440_PLL_16934400
bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
- default y if CPU_FREQ_S3C24XX_PLL
+ depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+ default y if S3C24XX_PLL
help
PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
@@ -597,7 +585,7 @@ config MACH_NEXCODER_2440
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
- select S3C2410_IOTIMING if S3C2440_CPUFREQ
+ select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_12000000
select S3C24XX_DCLK
select S3C24XX_GPIO_EXTRA128
@@ -669,7 +657,7 @@ config MACH_RX1950
bool "HP iPAQ rx1950"
select I2C
select PM_H1940 if PM
- select S3C2410_IOTIMING if S3C2440_CPUFREQ
+ select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
select S3C24XX_DCLK
select S3C24XX_PWM
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 6de730bada4d..7f54e5b954ca 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -17,13 +17,11 @@ obj- :=
obj-y += common.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
-obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o
obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o
-obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o
obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
@@ -34,7 +32,6 @@ obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o
-obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
@@ -59,9 +56,6 @@ obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o
obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o
obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpufreq.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o
-
#
# machine support
# following is ordered alphabetically by option text.
diff --git a/arch/arm/mach-s3c24xx/s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h
index 548ced42cbb7..548ced42cbb7 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.h
+++ b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h
diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
index 663436d9db01..bd064c05c473 100644
--- a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
@@ -31,7 +31,7 @@
#include <plat/cpu-freq-core.h>
#include <plat/clock.h>
-#include "s3c2412.h"
+#include <mach/s3c2412.h>
#define print_ns(x) ((x) / 10), ((x) % 10)
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index aba9e5692958..bfe443daf4b0 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -21,28 +21,14 @@
static struct stedma40_chan_cfg msp0_dma_rx = {
.high_priority = true,
- .dir = STEDMA40_PERIPH_TO_MEM,
-
- .src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
- /* data_width is set during configuration */
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
};
static struct stedma40_chan_cfg msp0_dma_tx = {
.high_priority = true,
- .dir = STEDMA40_MEM_TO_PERIPH,
-
- .src_dev_type = STEDMA40_DEV_DST_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX,
-
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
- /* data_width is set during configuration */
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
};
struct msp_i2s_platform_data msp0_platform_data = {
@@ -53,28 +39,14 @@ struct msp_i2s_platform_data msp0_platform_data = {
static struct stedma40_chan_cfg msp1_dma_rx = {
.high_priority = true,
- .dir = STEDMA40_PERIPH_TO_MEM,
-
- .src_dev_type = DB8500_DMA_DEV30_MSP3_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
- /* data_width is set during configuration */
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV30_MSP3,
};
static struct stedma40_chan_cfg msp1_dma_tx = {
.high_priority = true,
- .dir = STEDMA40_MEM_TO_PERIPH,
-
- .src_dev_type = STEDMA40_DEV_DST_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV30_MSP1_TX,
-
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
- /* data_width is set during configuration */
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV30_MSP1,
};
struct msp_i2s_platform_data msp1_platform_data = {
@@ -85,32 +57,16 @@ struct msp_i2s_platform_data msp1_platform_data = {
static struct stedma40_chan_cfg msp2_dma_rx = {
.high_priority = true,
- .dir = STEDMA40_PERIPH_TO_MEM,
-
- .src_dev_type = DB8500_DMA_DEV14_MSP2_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-
- /* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */
- .src_info.psize = STEDMA40_PSIZE_LOG_1,
- .dst_info.psize = STEDMA40_PSIZE_LOG_1,
-
- /* data_width is set during configuration */
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV14_MSP2,
};
static struct stedma40_chan_cfg msp2_dma_tx = {
.high_priority = true,
- .dir = STEDMA40_MEM_TO_PERIPH,
-
- .src_dev_type = STEDMA40_DEV_DST_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV14_MSP2_TX,
-
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV14_MSP2,
.use_fixed_channel = true,
.phy_channel = 1,
-
- /* data_width is set during configuration */
};
static struct platform_device *db8500_add_msp_i2s(struct device *parent,
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 43be3e0d4e30..b3e61a38e5c8 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -34,20 +34,14 @@
#ifdef CONFIG_STE_DMA40
struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV29_SD_MM0_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV29_SD_MM0,
};
static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV29_SD_MM0_TX,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV29_SD_MM0,
};
#endif
@@ -89,20 +83,14 @@ void mop500_sdi_tc35892_init(struct device *parent)
#ifdef CONFIG_STE_DMA40
static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV32_SD_MM1_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV32_SD_MM1,
};
static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV32_SD_MM1_TX,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV32_SD_MM1,
};
#endif
@@ -127,20 +115,14 @@ struct mmci_platform_data mop500_sdi1_data = {
#ifdef CONFIG_STE_DMA40
struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV28_SD_MM2_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV28_SD_MM2,
};
static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV28_SD_MM2_TX,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV28_SD_MM2,
};
#endif
@@ -169,20 +151,14 @@ struct mmci_platform_data mop500_sdi2_data = {
#ifdef CONFIG_STE_DMA40
struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV42_SD_MM4_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV42_SD_MM4,
};
static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV42_SD_MM4_TX,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV42_SD_MM4,
};
#endif
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 78389de94dde..df5d27a532e9 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -413,47 +413,23 @@ static void mop500_prox_deactivate(struct device *dev)
regulator_put(prox_regulator);
}
-void mop500_snowball_ethernet_clock_enable(void)
-{
- struct clk *clk;
-
- clk = clk_get_sys("fsmc", NULL);
- if (!IS_ERR(clk))
- clk_prepare_enable(clk);
-}
-
static struct cryp_platform_data u8500_cryp1_platform_data = {
.mem_to_engine = {
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV48_CAC1_TX,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV48_CAC1,
.mode = STEDMA40_MODE_LOGICAL,
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
},
.engine_to_mem = {
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV48_CAC1_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV48_CAC1,
.mode = STEDMA40_MODE_LOGICAL,
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
}
};
static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = {
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV50_HAC1_TX,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV50_HAC1_TX,
.mode = STEDMA40_MODE_LOGICAL,
- .src_info.psize = STEDMA40_PSIZE_LOG_16,
- .dst_info.psize = STEDMA40_PSIZE_LOG_16,
};
static struct hash_platform_data u8500_hash1_platform_data = {
@@ -470,20 +446,14 @@ static struct platform_device *mop500_platform_devs[] __initdata = {
#ifdef CONFIG_STE_DMA40
static struct stedma40_chan_cfg ssp0_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV8_SSP0_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV8_SSP0,
};
static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV8_SSP0_TX,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV8_SSP0,
};
#endif
@@ -511,56 +481,38 @@ static void __init mop500_spi_init(struct device *parent)
#ifdef CONFIG_STE_DMA40
static struct stedma40_chan_cfg uart0_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV13_UART0_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV13_UART0,
};
static struct stedma40_chan_cfg uart0_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV13_UART0_TX,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV13_UART0,
};
static struct stedma40_chan_cfg uart1_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV12_UART1_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV12_UART1,
};
static struct stedma40_chan_cfg uart1_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV12_UART1_TX,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV12_UART1,
};
static struct stedma40_chan_cfg uart2_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB8500_DMA_DEV11_UART2_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dir = DMA_DEV_TO_MEM,
+ .dev_type = DB8500_DMA_DEV11_UART2,
};
static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV11_UART2_TX,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dir = DMA_MEM_TO_DEV,
+ .dev_type = DB8500_DMA_DEV11_UART2,
};
#endif
@@ -674,7 +626,7 @@ static void __init snowball_init_machine(void)
mop500_audio_init(parent);
mop500_uart_init(parent);
- mop500_snowball_ethernet_clock_enable();
+ u8500_cryp1_hash1_init(parent);
/* This board has full regulator constraints */
regulator_has_full_constraints();
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 49514b825034..d6fab166cbf1 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -93,6 +93,7 @@ extern struct amba_pl011_data uart0_plat;
extern struct amba_pl011_data uart1_plat;
extern struct amba_pl011_data uart2_plat;
extern struct pl022_ssp_controller ssp0_plat;
+extern struct stedma40_platform_data dma40_plat_data;
extern void mop500_sdi_init(struct device *parent);
extern void snowball_sdi_init(struct device *parent);
@@ -104,7 +105,6 @@ void __init mop500_pinmaps_init(void);
void __init snowball_pinmaps_init(void);
void __init hrefv60_pinmaps_init(void);
void mop500_audio_init(struct device *parent);
-void mop500_snowball_ethernet_clock_enable(void);
int __init mop500_uib_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 7669a49fb6fb..12eee8167525 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -162,26 +162,15 @@ static void __init db8500_add_gpios(struct device *parent)
dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
}
-static int usb_db8500_rx_dma_cfg[] = {
- DB8500_DMA_DEV38_USB_OTG_IEP_1_9,
- DB8500_DMA_DEV37_USB_OTG_IEP_2_10,
- DB8500_DMA_DEV36_USB_OTG_IEP_3_11,
- DB8500_DMA_DEV19_USB_OTG_IEP_4_12,
- DB8500_DMA_DEV18_USB_OTG_IEP_5_13,
- DB8500_DMA_DEV17_USB_OTG_IEP_6_14,
- DB8500_DMA_DEV16_USB_OTG_IEP_7_15,
- DB8500_DMA_DEV39_USB_OTG_IEP_8
-};
-
-static int usb_db8500_tx_dma_cfg[] = {
- DB8500_DMA_DEV38_USB_OTG_OEP_1_9,
- DB8500_DMA_DEV37_USB_OTG_OEP_2_10,
- DB8500_DMA_DEV36_USB_OTG_OEP_3_11,
- DB8500_DMA_DEV19_USB_OTG_OEP_4_12,
- DB8500_DMA_DEV18_USB_OTG_OEP_5_13,
- DB8500_DMA_DEV17_USB_OTG_OEP_6_14,
- DB8500_DMA_DEV16_USB_OTG_OEP_7_15,
- DB8500_DMA_DEV39_USB_OTG_OEP_8
+static int usb_db8500_dma_cfg[] = {
+ DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9,
+ DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10,
+ DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11,
+ DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12,
+ DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13,
+ DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14,
+ DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15,
+ DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8
};
static const char *db8500_read_soc_id(void)
@@ -215,7 +204,7 @@ struct device * __init u8500_init_devices(void)
db8500_add_rtc(parent);
db8500_add_gpios(parent);
- db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+ db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg);
for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
platform_devs[i]->dev.parent = parent;
@@ -226,34 +215,13 @@ struct device * __init u8500_init_devices(void)
}
#ifdef CONFIG_MACH_UX500_DT
-
-/* TODO: Once all pieces are DT:ed, remove completely. */
-static struct device * __init u8500_of_init_devices(void)
-{
- struct device *parent = db8500_soc_device_init();
-
- db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
-
- u8500_dma40_device.dev.parent = parent;
-
- /*
- * Devices to be DT:ed:
- * u8500_dma40_device = todo
- * db8500_pmu_device = done
- * db8500_prcmu_device = done
- */
- platform_device_register(&u8500_dma40_device);
-
- return parent;
-}
-
static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires call-back bindings. */
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
/* Requires DMA bindings. */
- OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
- OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
- OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
+ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL),
+ OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL),
+ OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL),
OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
@@ -294,6 +262,8 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
"ux500-msp-i2s.2", &msp2_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
"ux500-msp-i2s.3", &msp3_platform_data),
+ /* Requires clock name bindings and channel address lookup table. */
+ OF_DEV_AUXDATA("stericsson,db8500-dma40", 0x801C0000, "dma40.0", NULL),
{},
};
@@ -317,22 +287,18 @@ static const struct of_device_id u8500_local_bus_nodes[] = {
static void __init u8500_init_machine(void)
{
- struct device *parent = NULL;
+ struct device *parent = db8500_soc_device_init();
/* Pinmaps must be in place before devices register */
if (of_machine_is_compatible("st-ericsson,mop500"))
mop500_pinmaps_init();
else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
snowball_pinmaps_init();
- mop500_snowball_ethernet_clock_enable();
} else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
hrefv60_pinmaps_init();
else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
/* TODO: Add pinmaps for ccu9540 board. */
- /* TODO: Export SoC, USB, cpu-freq and DMA40 */
- parent = u8500_of_init_devices();
-
/* automatically probe child nodes of dbx5x0 devices */
if (of_machine_is_compatible("st-ericsson,u8540"))
of_platform_populate(NULL, u8500_local_bus_nodes,
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index ddbdcda8306a..516a6f57d159 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -42,128 +42,7 @@ static struct resource dma40_resources[] = {
}
};
-/* Default configuration for physcial memcpy */
-struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
- .mode = STEDMA40_MODE_PHYSICAL,
- .dir = STEDMA40_MEM_TO_MEM,
-
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .src_info.psize = STEDMA40_PSIZE_PHY_1,
- .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.psize = STEDMA40_PSIZE_PHY_1,
- .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-/* Default configuration for logical memcpy */
-struct stedma40_chan_cfg dma40_memcpy_conf_log = {
- .dir = STEDMA40_MEM_TO_MEM,
-
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .src_info.psize = STEDMA40_PSIZE_LOG_1,
- .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.psize = STEDMA40_PSIZE_LOG_1,
- .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
-/*
- * Mapping between destination event lines and physical device address.
- * The event line is tied to a device and therefore the address is constant.
- * When the address comes from a primecell it will be configured in runtime
- * and we set the address to -1 as a placeholder.
- */
-static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = {
- /* MUSB - these will be runtime-reconfigured */
- [DB8500_DMA_DEV39_USB_OTG_OEP_8] = -1,
- [DB8500_DMA_DEV16_USB_OTG_OEP_7_15] = -1,
- [DB8500_DMA_DEV17_USB_OTG_OEP_6_14] = -1,
- [DB8500_DMA_DEV18_USB_OTG_OEP_5_13] = -1,
- [DB8500_DMA_DEV19_USB_OTG_OEP_4_12] = -1,
- [DB8500_DMA_DEV36_USB_OTG_OEP_3_11] = -1,
- [DB8500_DMA_DEV37_USB_OTG_OEP_2_10] = -1,
- [DB8500_DMA_DEV38_USB_OTG_OEP_1_9] = -1,
- /* PrimeCells - run-time configured */
- [DB8500_DMA_DEV0_SPI0_TX] = -1,
- [DB8500_DMA_DEV1_SD_MMC0_TX] = -1,
- [DB8500_DMA_DEV2_SD_MMC1_TX] = -1,
- [DB8500_DMA_DEV3_SD_MMC2_TX] = -1,
- [DB8500_DMA_DEV8_SSP0_TX] = -1,
- [DB8500_DMA_DEV9_SSP1_TX] = -1,
- [DB8500_DMA_DEV11_UART2_TX] = -1,
- [DB8500_DMA_DEV12_UART1_TX] = -1,
- [DB8500_DMA_DEV13_UART0_TX] = -1,
- [DB8500_DMA_DEV28_SD_MM2_TX] = -1,
- [DB8500_DMA_DEV29_SD_MM0_TX] = -1,
- [DB8500_DMA_DEV32_SD_MM1_TX] = -1,
- [DB8500_DMA_DEV33_SPI2_TX] = -1,
- [DB8500_DMA_DEV35_SPI1_TX] = -1,
- [DB8500_DMA_DEV40_SPI3_TX] = -1,
- [DB8500_DMA_DEV41_SD_MM3_TX] = -1,
- [DB8500_DMA_DEV42_SD_MM4_TX] = -1,
- [DB8500_DMA_DEV43_SD_MM5_TX] = -1,
- [DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
- [DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET,
- [DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
- [DB8500_DMA_DEV48_CAC1_TX] = U8500_CRYP1_BASE + CRYP1_TX_REG_OFFSET,
- [DB8500_DMA_DEV50_HAC1_TX] = U8500_HASH1_BASE + HASH1_TX_REG_OFFSET,
-};
-
-/* Mapping between source event lines and physical device address */
-static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = {
- /* MUSB - these will be runtime-reconfigured */
- [DB8500_DMA_DEV39_USB_OTG_IEP_8] = -1,
- [DB8500_DMA_DEV16_USB_OTG_IEP_7_15] = -1,
- [DB8500_DMA_DEV17_USB_OTG_IEP_6_14] = -1,
- [DB8500_DMA_DEV18_USB_OTG_IEP_5_13] = -1,
- [DB8500_DMA_DEV19_USB_OTG_IEP_4_12] = -1,
- [DB8500_DMA_DEV36_USB_OTG_IEP_3_11] = -1,
- [DB8500_DMA_DEV37_USB_OTG_IEP_2_10] = -1,
- [DB8500_DMA_DEV38_USB_OTG_IEP_1_9] = -1,
- /* PrimeCells */
- [DB8500_DMA_DEV0_SPI0_RX] = -1,
- [DB8500_DMA_DEV1_SD_MMC0_RX] = -1,
- [DB8500_DMA_DEV2_SD_MMC1_RX] = -1,
- [DB8500_DMA_DEV3_SD_MMC2_RX] = -1,
- [DB8500_DMA_DEV8_SSP0_RX] = -1,
- [DB8500_DMA_DEV9_SSP1_RX] = -1,
- [DB8500_DMA_DEV11_UART2_RX] = -1,
- [DB8500_DMA_DEV12_UART1_RX] = -1,
- [DB8500_DMA_DEV13_UART0_RX] = -1,
- [DB8500_DMA_DEV28_SD_MM2_RX] = -1,
- [DB8500_DMA_DEV29_SD_MM0_RX] = -1,
- [DB8500_DMA_DEV32_SD_MM1_RX] = -1,
- [DB8500_DMA_DEV33_SPI2_RX] = -1,
- [DB8500_DMA_DEV35_SPI1_RX] = -1,
- [DB8500_DMA_DEV40_SPI3_RX] = -1,
- [DB8500_DMA_DEV41_SD_MM3_RX] = -1,
- [DB8500_DMA_DEV42_SD_MM4_RX] = -1,
- [DB8500_DMA_DEV43_SD_MM5_RX] = -1,
- [DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
- [DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET,
- [DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
- [DB8500_DMA_DEV48_CAC1_RX] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET,
-};
-
-/* Reserved event lines for memcpy only */
-static int dma40_memcpy_event[] = {
- DB8500_DMA_MEMCPY_TX_0,
- DB8500_DMA_MEMCPY_TX_1,
- DB8500_DMA_MEMCPY_TX_2,
- DB8500_DMA_MEMCPY_TX_3,
- DB8500_DMA_MEMCPY_TX_4,
- DB8500_DMA_MEMCPY_TX_5,
-};
-
-static struct stedma40_platform_data dma40_plat_data = {
- .dev_len = DB8500_DMA_NR_DEV,
- .dev_rx = dma40_rx_map,
- .dev_tx = dma40_tx_map,
- .memcpy = dma40_memcpy_event,
- .memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
- .memcpy_conf_phy = &dma40_memcpy_conf_phy,
- .memcpy_conf_log = &dma40_memcpy_conf_log,
+struct stedma40_platform_data dma40_plat_data = {
.disabled_channels = {-1},
};
diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h
index a616419bea76..0296ae5b0fd9 100644
--- a/arch/arm/mach-ux500/ste-dma40-db8500.h
+++ b/arch/arm/mach-ux500/ste-dma40-db8500.h
@@ -12,133 +12,74 @@
#define DB8500_DMA_NR_DEV 64
-enum dma_src_dev_type {
- DB8500_DMA_DEV0_SPI0_RX = 0,
- DB8500_DMA_DEV1_SD_MMC0_RX = 1,
- DB8500_DMA_DEV2_SD_MMC1_RX = 2,
- DB8500_DMA_DEV3_SD_MMC2_RX = 3,
- DB8500_DMA_DEV4_I2C1_RX = 4,
- DB8500_DMA_DEV5_I2C3_RX = 5,
- DB8500_DMA_DEV6_I2C2_RX = 6,
- DB8500_DMA_DEV7_I2C4_RX = 7, /* Only on V1 and later */
- DB8500_DMA_DEV8_SSP0_RX = 8,
- DB8500_DMA_DEV9_SSP1_RX = 9,
- DB8500_DMA_DEV10_MCDE_RX = 10,
- DB8500_DMA_DEV11_UART2_RX = 11,
- DB8500_DMA_DEV12_UART1_RX = 12,
- DB8500_DMA_DEV13_UART0_RX = 13,
- DB8500_DMA_DEV14_MSP2_RX = 14,
- DB8500_DMA_DEV15_I2C0_RX = 15,
- DB8500_DMA_DEV16_USB_OTG_IEP_7_15 = 16,
- DB8500_DMA_DEV17_USB_OTG_IEP_6_14 = 17,
- DB8500_DMA_DEV18_USB_OTG_IEP_5_13 = 18,
- DB8500_DMA_DEV19_USB_OTG_IEP_4_12 = 19,
- DB8500_DMA_DEV20_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
- DB8500_DMA_DEV21_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
- DB8500_DMA_DEV22_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
- DB8500_DMA_DEV23_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
- DB8500_DMA_DEV24_SRC_SXA0_RX_TX = 24,
- DB8500_DMA_DEV25_SRC_SXA1_RX_TX = 25,
- DB8500_DMA_DEV26_SRC_SXA2_RX_TX = 26,
- DB8500_DMA_DEV27_SRC_SXA3_RX_TX = 27,
- DB8500_DMA_DEV28_SD_MM2_RX = 28,
- DB8500_DMA_DEV29_SD_MM0_RX = 29,
- DB8500_DMA_DEV30_MSP1_RX = 30,
+/*
+ * Unless otherwise specified, all channels numbers are used for
+ * TX & RX, and can be used for either source or destination
+ * channels.
+ */
+enum dma_dev_type {
+ DB8500_DMA_DEV0_SPI0 = 0,
+ DB8500_DMA_DEV1_SD_MMC0 = 1,
+ DB8500_DMA_DEV2_SD_MMC1 = 2,
+ DB8500_DMA_DEV3_SD_MMC2 = 3,
+ DB8500_DMA_DEV4_I2C1 = 4,
+ DB8500_DMA_DEV5_I2C3 = 5,
+ DB8500_DMA_DEV6_I2C2 = 6,
+ DB8500_DMA_DEV7_I2C4 = 7, /* Only on V1 and later */
+ DB8500_DMA_DEV8_SSP0 = 8,
+ DB8500_DMA_DEV9_SSP1 = 9,
+ DB8500_DMA_DEV10_MCDE_RX = 10, /* RX only */
+ DB8500_DMA_DEV11_UART2 = 11,
+ DB8500_DMA_DEV12_UART1 = 12,
+ DB8500_DMA_DEV13_UART0 = 13,
+ DB8500_DMA_DEV14_MSP2 = 14,
+ DB8500_DMA_DEV15_I2C0 = 15,
+ DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15 = 16,
+ DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14 = 17,
+ DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13 = 18,
+ DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12 = 19,
+ DB8500_DMA_DEV20_SLIM0_CH0_HSI_CH0 = 20,
+ DB8500_DMA_DEV21_SLIM0_CH1_HSI_CH1 = 21,
+ DB8500_DMA_DEV22_SLIM0_CH2_HSI_CH2 = 22,
+ DB8500_DMA_DEV23_SLIM0_CH3_HSI_CH3 = 23,
+ DB8500_DMA_DEV24_SXA0 = 24,
+ DB8500_DMA_DEV25_SXA1 = 25,
+ DB8500_DMA_DEV26_SXA2 = 26,
+ DB8500_DMA_DEV27_SXA3 = 27,
+ DB8500_DMA_DEV28_SD_MM2 = 28,
+ DB8500_DMA_DEV29_SD_MM0 = 29,
+ DB8500_DMA_DEV30_MSP1 = 30,
/* On DB8500v2, MSP3 RX replaces MSP1 RX */
- DB8500_DMA_DEV30_MSP3_RX = 30,
- DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX = 31,
- DB8500_DMA_DEV32_SD_MM1_RX = 32,
- DB8500_DMA_DEV33_SPI2_RX = 33,
- DB8500_DMA_DEV34_I2C3_RX2 = 34,
- DB8500_DMA_DEV35_SPI1_RX = 35,
- DB8500_DMA_DEV36_USB_OTG_IEP_3_11 = 36,
- DB8500_DMA_DEV37_USB_OTG_IEP_2_10 = 37,
- DB8500_DMA_DEV38_USB_OTG_IEP_1_9 = 38,
- DB8500_DMA_DEV39_USB_OTG_IEP_8 = 39,
- DB8500_DMA_DEV40_SPI3_RX = 40,
- DB8500_DMA_DEV41_SD_MM3_RX = 41,
- DB8500_DMA_DEV42_SD_MM4_RX = 42,
- DB8500_DMA_DEV43_SD_MM5_RX = 43,
- DB8500_DMA_DEV44_SRC_SXA4_RX_TX = 44,
- DB8500_DMA_DEV45_SRC_SXA5_RX_TX = 45,
- DB8500_DMA_DEV46_SLIM0_CH8_RX_SRC_SXA6_RX_TX = 46,
- DB8500_DMA_DEV47_SLIM0_CH9_RX_SRC_SXA7_RX_TX = 47,
- DB8500_DMA_DEV48_CAC1_RX = 48,
- /* 49, 50 and 51 are not used */
- DB8500_DMA_DEV52_SLIM0_CH4_RX_HSI_RX_CH4 = 52,
- DB8500_DMA_DEV53_SLIM0_CH5_RX_HSI_RX_CH5 = 53,
- DB8500_DMA_DEV54_SLIM0_CH6_RX_HSI_RX_CH6 = 54,
- DB8500_DMA_DEV55_SLIM0_CH7_RX_HSI_RX_CH7 = 55,
- /* 56, 57, 58, 59 and 60 are not used */
- DB8500_DMA_DEV61_CAC0_RX = 61,
- /* 62 and 63 are not used */
-};
-
-enum dma_dest_dev_type {
- DB8500_DMA_DEV0_SPI0_TX = 0,
- DB8500_DMA_DEV1_SD_MMC0_TX = 1,
- DB8500_DMA_DEV2_SD_MMC1_TX = 2,
- DB8500_DMA_DEV3_SD_MMC2_TX = 3,
- DB8500_DMA_DEV4_I2C1_TX = 4,
- DB8500_DMA_DEV5_I2C3_TX = 5,
- DB8500_DMA_DEV6_I2C2_TX = 6,
- DB8500_DMA_DEV7_I2C4_TX = 7, /* Only on V1 and later */
- DB8500_DMA_DEV8_SSP0_TX = 8,
- DB8500_DMA_DEV9_SSP1_TX = 9,
- /* 10 is not used*/
- DB8500_DMA_DEV11_UART2_TX = 11,
- DB8500_DMA_DEV12_UART1_TX = 12,
- DB8500_DMA_DEV13_UART0_TX = 13,
- DB8500_DMA_DEV14_MSP2_TX = 14,
- DB8500_DMA_DEV15_I2C0_TX = 15,
- DB8500_DMA_DEV16_USB_OTG_OEP_7_15 = 16,
- DB8500_DMA_DEV17_USB_OTG_OEP_6_14 = 17,
- DB8500_DMA_DEV18_USB_OTG_OEP_5_13 = 18,
- DB8500_DMA_DEV19_USB_OTG_OEP_4_12 = 19,
- DB8500_DMA_DEV20_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
- DB8500_DMA_DEV21_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
- DB8500_DMA_DEV22_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
- DB8500_DMA_DEV23_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
- DB8500_DMA_DEV24_DST_SXA0_RX_TX = 24,
- DB8500_DMA_DEV25_DST_SXA1_RX_TX = 25,
- DB8500_DMA_DEV26_DST_SXA2_RX_TX = 26,
- DB8500_DMA_DEV27_DST_SXA3_RX_TX = 27,
- DB8500_DMA_DEV28_SD_MM2_TX = 28,
- DB8500_DMA_DEV29_SD_MM0_TX = 29,
- DB8500_DMA_DEV30_MSP1_TX = 30,
- DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX = 31,
- DB8500_DMA_DEV32_SD_MM1_TX = 32,
- DB8500_DMA_DEV33_SPI2_TX = 33,
- DB8500_DMA_DEV34_I2C3_TX2 = 34,
- DB8500_DMA_DEV35_SPI1_TX = 35,
- DB8500_DMA_DEV36_USB_OTG_OEP_3_11 = 36,
- DB8500_DMA_DEV37_USB_OTG_OEP_2_10 = 37,
- DB8500_DMA_DEV38_USB_OTG_OEP_1_9 = 38,
- DB8500_DMA_DEV39_USB_OTG_OEP_8 = 39,
- DB8500_DMA_DEV40_SPI3_TX = 40,
- DB8500_DMA_DEV41_SD_MM3_TX = 41,
- DB8500_DMA_DEV42_SD_MM4_TX = 42,
- DB8500_DMA_DEV43_SD_MM5_TX = 43,
- DB8500_DMA_DEV44_DST_SXA4_RX_TX = 44,
- DB8500_DMA_DEV45_DST_SXA5_RX_TX = 45,
- DB8500_DMA_DEV46_SLIM0_CH8_TX_DST_SXA6_RX_TX = 46,
- DB8500_DMA_DEV47_SLIM0_CH9_TX_DST_SXA7_RX_TX = 47,
- DB8500_DMA_DEV48_CAC1_TX = 48,
- DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49,
- DB8500_DMA_DEV50_HAC1_TX = 50,
- DB8500_DMA_MEMCPY_TX_0 = 51,
- DB8500_DMA_DEV52_SLIM1_CH4_TX_HSI_TX_CH4 = 52,
- DB8500_DMA_DEV53_SLIM1_CH5_TX_HSI_TX_CH5 = 53,
- DB8500_DMA_DEV54_SLIM1_CH6_TX_HSI_TX_CH6 = 54,
- DB8500_DMA_DEV55_SLIM1_CH7_TX_HSI_TX_CH7 = 55,
- DB8500_DMA_MEMCPY_TX_1 = 56,
- DB8500_DMA_MEMCPY_TX_2 = 57,
- DB8500_DMA_MEMCPY_TX_3 = 58,
- DB8500_DMA_MEMCPY_TX_4 = 59,
- DB8500_DMA_MEMCPY_TX_5 = 60,
- DB8500_DMA_DEV61_CAC0_TX = 61,
- DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62,
- DB8500_DMA_DEV63_HAC0_TX = 63,
+ DB8500_DMA_DEV30_MSP3 = 30,
+ DB8500_DMA_DEV31_MSP0_SLIM0_CH0 = 31,
+ DB8500_DMA_DEV32_SD_MM1 = 32,
+ DB8500_DMA_DEV33_SPI2 = 33,
+ DB8500_DMA_DEV34_I2C3_RX2_TX2 = 34,
+ DB8500_DMA_DEV35_SPI1 = 35,
+ DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11 = 36,
+ DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10 = 37,
+ DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9 = 38,
+ DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8 = 39,
+ DB8500_DMA_DEV40_SPI3 = 40,
+ DB8500_DMA_DEV41_SD_MM3 = 41,
+ DB8500_DMA_DEV42_SD_MM4 = 42,
+ DB8500_DMA_DEV43_SD_MM5 = 43,
+ DB8500_DMA_DEV44_SXA4 = 44,
+ DB8500_DMA_DEV45_SXA5 = 45,
+ DB8500_DMA_DEV46_SLIM0_CH8_SRC_SXA6 = 46,
+ DB8500_DMA_DEV47_SLIM0_CH9_SRC_SXA7 = 47,
+ DB8500_DMA_DEV48_CAC1 = 48,
+ DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49, /* TX only */
+ DB8500_DMA_DEV50_HAC1_TX = 50, /* TX only */
+ DB8500_DMA_MEMCPY_TX_0 = 51, /* TX only */
+ DB8500_DMA_DEV52_SLIM0_CH4_HSI_CH4 = 52,
+ DB8500_DMA_DEV53_SLIM0_CH5_HSI_CH5 = 53,
+ DB8500_DMA_DEV54_SLIM0_CH6_HSI_CH6 = 54,
+ DB8500_DMA_DEV55_SLIM0_CH7_HSI_CH7 = 55,
+ /* 56 -> 60 are channels reserved for memcpy only */
+ DB8500_DMA_DEV61_CAC0 = 61,
+ DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62, /* TX only */
+ DB8500_DMA_DEV63_HAC0_TX = 63, /* TX only */
};
#endif
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 2dfc72f7cd8a..b7bd8d3a5507 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -14,25 +14,15 @@
#define MUSB_DMA40_RX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
- .dir = STEDMA40_PERIPH_TO_MEM, \
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY, \
- .src_info.data_width = STEDMA40_WORD_WIDTH, \
- .dst_info.data_width = STEDMA40_WORD_WIDTH, \
- .src_info.psize = STEDMA40_PSIZE_LOG_16, \
- .dst_info.psize = STEDMA40_PSIZE_LOG_16, \
+ .dir = DMA_DEV_TO_MEM, \
}
#define MUSB_DMA40_TX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
- .dir = STEDMA40_MEM_TO_PERIPH, \
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY, \
- .src_info.data_width = STEDMA40_WORD_WIDTH, \
- .dst_info.data_width = STEDMA40_WORD_WIDTH, \
- .src_info.psize = STEDMA40_PSIZE_LOG_16, \
- .dst_info.psize = STEDMA40_PSIZE_LOG_16, \
+ .dir = DMA_MEM_TO_DEV, \
}
-static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS]
+static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
= {
MUSB_DMA40_RX_CH,
MUSB_DMA40_RX_CH,
@@ -44,7 +34,7 @@ static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS]
MUSB_DMA40_RX_CH
};
-static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS]
+static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
= {
MUSB_DMA40_TX_CH,
MUSB_DMA40_TX_CH,
@@ -56,7 +46,7 @@ static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS]
MUSB_DMA40_TX_CH,
};
-static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = {
+static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
&musb_dma_rx_ch[0],
&musb_dma_rx_ch[1],
&musb_dma_rx_ch[2],
@@ -67,7 +57,7 @@ static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = {
&musb_dma_rx_ch[7]
};
-static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = {
+static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
&musb_dma_tx_ch[0],
&musb_dma_tx_ch[1],
&musb_dma_tx_ch[2],
@@ -81,23 +71,11 @@ static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = {
static struct ux500_musb_board_data musb_board_data = {
.dma_rx_param_array = ux500_dma_rx_param_array,
.dma_tx_param_array = ux500_dma_tx_param_array,
- .num_rx_channels = UX500_MUSB_DMA_NUM_RX_CHANNELS,
- .num_tx_channels = UX500_MUSB_DMA_NUM_TX_CHANNELS,
.dma_filter = stedma40_filter,
};
-static u64 ux500_musb_dmamask = DMA_BIT_MASK(32);
-
-static struct musb_hdrc_config musb_hdrc_config = {
- .multipoint = true,
- .dyn_fifo = true,
- .num_eps = 16,
- .ram_bits = 16,
-};
-
static struct musb_hdrc_platform_data musb_platform_data = {
.mode = MUSB_OTG,
- .config = &musb_hdrc_config,
.board_data = &musb_board_data,
};
@@ -118,27 +96,26 @@ struct platform_device ux500_musb_device = {
.id = 0,
.dev = {
.platform_data = &musb_platform_data,
- .dma_mask = &ux500_musb_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(usb_resources),
.resource = usb_resources,
};
-static inline void ux500_usb_dma_update_rx_ch_config(int *src_dev_type)
+static inline void ux500_usb_dma_update_rx_ch_config(int *dev_type)
{
u32 idx;
- for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_CHANNELS; idx++)
- musb_dma_rx_ch[idx].src_dev_type = src_dev_type[idx];
+ for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
+ musb_dma_rx_ch[idx].dev_type = dev_type[idx];
}
-static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type)
+static inline void ux500_usb_dma_update_tx_ch_config(int *dev_type)
{
u32 idx;
- for (idx = 0; idx < UX500_MUSB_DMA_NUM_TX_CHANNELS; idx++)
- musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
+ for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
+ musb_dma_tx_ch[idx].dev_type = dev_type[idx];
}
void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ce66eb9be481..f82bae2171eb 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -86,22 +86,6 @@ config OMAP_MUX_WARNINGS
to change the pin multiplexing setup. When there are no warnings
printed, it's safe to deselect OMAP_MUX for your product.
-config OMAP_MBOX_FWK
- tristate "Mailbox framework support"
- depends on ARCH_OMAP && !ARCH_MULTIPLATFORM
- help
- Say Y here if you want to use OMAP Mailbox framework support for
- DSP, IVA1.0 and IVA2 in OMAP1/2/3.
-
-config OMAP_MBOX_KFIFO_SIZE
- int "Mailbox kfifo default buffer size (bytes)"
- depends on OMAP_MBOX_FWK
- default 256
- help
- Specify the default size of mailbox's kfifo buffers (bytes).
- This can also be changed at runtime (via the mbox_kfifo_size
- module parameter).
-
config OMAP_IOMMU_IVA2
bool
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 31199417b56a..0b01b68fd033 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -17,6 +17,3 @@ obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
obj-y += $(i2c-omap-m) $(i2c-omap-y)
-# OMAP mailbox framework
-obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
-
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
index 95509d8eb140..d7e17150028a 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
@@ -202,7 +202,7 @@ extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS
#define s3c_cpufreq_debugfs_call(x) x
#else
#define s3c_cpufreq_debugfs_call(x) NULL
@@ -259,17 +259,17 @@ extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
#define s3c2412_iotiming_set NULL
#endif /* CONFIG_S3C2412_IOTIMING */
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG
#define s3c_freq_dbg(x...) printk(KERN_INFO x)
#else
#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */
-#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG
#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
#else
#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */
static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
int index, size_t table_size,
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq.h b/arch/arm/plat-samsung/include/plat/cpu-freq.h
index 80c4a809c721..85517ab962ae 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq.h
@@ -126,7 +126,7 @@ struct s3c_cpufreq_board {
};
/* Things depending on frequency scaling. */
-#ifdef CONFIG_CPU_FREQ_S3C
+#ifdef CONFIG_ARM_S3C_CPUFREQ
#define __init_or_cpufreq
#else
#define __init_or_cpufreq __init
@@ -134,7 +134,7 @@ struct s3c_cpufreq_board {
/* Board functions */
-#ifdef CONFIG_CPU_FREQ_S3C
+#ifdef CONFIG_ARM_S3C_CPUFREQ
extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
#else
@@ -142,4 +142,4 @@ static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
{
return 0;
}
-#endif /* CONFIG_CPU_FREQ_S3C */
+#endif /* CONFIG_ARM_S3C_CPUFREQ */
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index b7c232e67425..187681013bdb 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o
obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o
obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o
obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o
+obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o
diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c
new file mode 100644
index 000000000000..9b1bbd52fd1f
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos-audss.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Author: Padmavathi Venna <padma.v@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Audio Subsystem Clock Controller.
+*/
+
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clk/exynos-audss-clk.h>
+
+static DEFINE_SPINLOCK(lock);
+static struct clk **clk_table;
+static void __iomem *reg_base;
+static struct clk_onecell_data clk_data;
+
+#define ASS_CLK_SRC 0x0
+#define ASS_CLK_DIV 0x4
+#define ASS_CLK_GATE 0x8
+
+static unsigned long reg_save[][2] = {
+ {ASS_CLK_SRC, 0},
+ {ASS_CLK_DIV, 0},
+ {ASS_CLK_GATE, 0},
+};
+
+/* list of all parent clock list */
+static const char *mout_audss_p[] = { "fin_pll", "fout_epll" };
+static const char *mout_i2s_p[] = { "mout_audss", "cdclk0", "sclk_audio0" };
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_audss_clk_suspend(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(reg_save); i++)
+ reg_save[i][1] = readl(reg_base + reg_save[i][0]);
+
+ return 0;
+}
+
+static void exynos_audss_clk_resume(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(reg_save); i++)
+ writel(reg_save[i][1], reg_base + reg_save[i][0]);
+}
+
+static struct syscore_ops exynos_audss_clk_syscore_ops = {
+ .suspend = exynos_audss_clk_suspend,
+ .resume = exynos_audss_clk_resume,
+};
+#endif /* CONFIG_PM_SLEEP */
+
+/* register exynos_audss clocks */
+void __init exynos_audss_clk_init(struct device_node *np)
+{
+ reg_base = of_iomap(np, 0);
+ if (!reg_base) {
+ pr_err("%s: failed to map audss registers\n", __func__);
+ return;
+ }
+
+ clk_table = kzalloc(sizeof(struct clk *) * EXYNOS_AUDSS_MAX_CLKS,
+ GFP_KERNEL);
+ if (!clk_table) {
+ pr_err("%s: could not allocate clk lookup table\n", __func__);
+ return;
+ }
+
+ clk_data.clks = clk_table;
+ clk_data.clk_num = EXYNOS_AUDSS_MAX_CLKS;
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ clk_table[EXYNOS_MOUT_AUDSS] = clk_register_mux(NULL, "mout_audss",
+ mout_audss_p, ARRAY_SIZE(mout_audss_p), 0,
+ reg_base + ASS_CLK_SRC, 0, 1, 0, &lock);
+
+ clk_table[EXYNOS_MOUT_I2S] = clk_register_mux(NULL, "mout_i2s",
+ mout_i2s_p, ARRAY_SIZE(mout_i2s_p), 0,
+ reg_base + ASS_CLK_SRC, 2, 2, 0, &lock);
+
+ clk_table[EXYNOS_DOUT_SRP] = clk_register_divider(NULL, "dout_srp",
+ "mout_audss", 0, reg_base + ASS_CLK_DIV, 0, 4,
+ 0, &lock);
+
+ clk_table[EXYNOS_DOUT_AUD_BUS] = clk_register_divider(NULL,
+ "dout_aud_bus", "dout_srp", 0,
+ reg_base + ASS_CLK_DIV, 4, 4, 0, &lock);
+
+ clk_table[EXYNOS_DOUT_I2S] = clk_register_divider(NULL, "dout_i2s",
+ "mout_i2s", 0, reg_base + ASS_CLK_DIV, 8, 4, 0,
+ &lock);
+
+ clk_table[EXYNOS_SRP_CLK] = clk_register_gate(NULL, "srp_clk",
+ "dout_srp", CLK_SET_RATE_PARENT,
+ reg_base + ASS_CLK_GATE, 0, 0, &lock);
+
+ clk_table[EXYNOS_I2S_BUS] = clk_register_gate(NULL, "i2s_bus",
+ "dout_aud_bus", CLK_SET_RATE_PARENT,
+ reg_base + ASS_CLK_GATE, 2, 0, &lock);
+
+ clk_table[EXYNOS_SCLK_I2S] = clk_register_gate(NULL, "sclk_i2s",
+ "dout_i2s", CLK_SET_RATE_PARENT,
+ reg_base + ASS_CLK_GATE, 3, 0, &lock);
+
+ clk_table[EXYNOS_PCM_BUS] = clk_register_gate(NULL, "pcm_bus",
+ "sclk_pcm", CLK_SET_RATE_PARENT,
+ reg_base + ASS_CLK_GATE, 4, 0, &lock);
+
+ clk_table[EXYNOS_SCLK_PCM] = clk_register_gate(NULL, "sclk_pcm",
+ "div_pcm0", CLK_SET_RATE_PARENT,
+ reg_base + ASS_CLK_GATE, 5, 0, &lock);
+
+#ifdef CONFIG_PM_SLEEP
+ register_syscore_ops(&exynos_audss_clk_syscore_ops);
+#endif
+
+ pr_info("Exynos: Audss: clock setup completed\n");
+}
+CLK_OF_DECLARE(exynos4210_audss_clk, "samsung,exynos4210-audss-clock",
+ exynos_audss_clk_init);
+CLK_OF_DECLARE(exynos5250_audss_clk, "samsung,exynos5250-audss-clock",
+ exynos_audss_clk_init);
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index 22d7699e7ced..6f767c515ec7 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -87,6 +87,7 @@ enum exynos5250_clks {
sclk_mmc0, sclk_mmc1, sclk_mmc2, sclk_mmc3, sclk_sata, sclk_usb3,
sclk_jpeg, sclk_uart0, sclk_uart1, sclk_uart2, sclk_uart3, sclk_pwm,
sclk_audio1, sclk_audio2, sclk_spdif, sclk_spi0, sclk_spi1, sclk_spi2,
+ div_i2s1, div_i2s2,
/* gate clocks */
gscl0 = 256, gscl1, gscl2, gscl3, gscl_wa, gscl_wb, smmu_gscl0,
@@ -291,8 +292,8 @@ struct samsung_div_clock exynos5250_div_clks[] __initdata = {
DIV(none, "div_pcm1", "sclk_audio1", DIV_PERIC4, 4, 8),
DIV(none, "div_audio2", "mout_audio2", DIV_PERIC4, 16, 4),
DIV(none, "div_pcm2", "sclk_audio2", DIV_PERIC4, 20, 8),
- DIV(none, "div_i2s1", "sclk_audio1", DIV_PERIC5, 0, 6),
- DIV(none, "div_i2s2", "sclk_audio2", DIV_PERIC5, 8, 6),
+ DIV(div_i2s1, "div_i2s1", "sclk_audio1", DIV_PERIC5, 0, 6),
+ DIV(div_i2s2, "div_i2s2", "sclk_audio2", DIV_PERIC5, 8, 6),
DIV(sclk_pixel, "div_hdmi_pixel", "sclk_vpll", DIV_DISP1_0, 28, 4),
DIV_A(none, "armclk", "div_arm", DIV_CPU0, 28, 3, "armclk"),
DIV_F(none, "div_mipi1_pre", "div_mipi1",
diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c
index 54f3d119d99c..77398f8c19a0 100644
--- a/drivers/clocksource/clksrc-dbx500-prcmu.c
+++ b/drivers/clocksource/clksrc-dbx500-prcmu.c
@@ -10,7 +10,7 @@
* DBx500-PRCMU Timer
* The PRCMU has 5 timers which are available in a always-on
* power domain. We use the Timer 4 for our always-on clock
- * source on DB8500 and Timer 3 on DB5500.
+ * source on DB8500.
*/
#include <linux/clockchips.h>
#include <linux/clksrc-dbx500-prcmu.h>
@@ -30,15 +30,14 @@
static void __iomem *clksrc_dbx500_timer_base;
-static cycle_t clksrc_dbx500_prcmu_read(struct clocksource *cs)
+static cycle_t notrace clksrc_dbx500_prcmu_read(struct clocksource *cs)
{
+ void __iomem *base = clksrc_dbx500_timer_base;
u32 count, count2;
do {
- count = readl(clksrc_dbx500_timer_base +
- PRCMU_TIMER_DOWNCOUNT);
- count2 = readl(clksrc_dbx500_timer_base +
- PRCMU_TIMER_DOWNCOUNT);
+ count = readl_relaxed(base + PRCMU_TIMER_DOWNCOUNT);
+ count2 = readl_relaxed(base + PRCMU_TIMER_DOWNCOUNT);
} while (count2 != count);
/* Negate because the timer is a decrementing counter */
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 6e57543fe0b9..a92440896868 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -96,6 +96,56 @@ config ARM_OMAP2PLUS_CPUFREQ
default ARCH_OMAP2PLUS
select CPU_FREQ_TABLE
+config ARM_S3C_CPUFREQ
+ bool
+ help
+ Internal configuration node for common cpufreq on Samsung SoC
+
+config ARM_S3C24XX_CPUFREQ
+ bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
+ depends on ARCH_S3C24XX
+ select ARM_S3C_CPUFREQ
+ help
+ This enables the CPUfreq driver for the Samsung S3C24XX family
+ of CPUs.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If in doubt, say N.
+
+config ARM_S3C24XX_CPUFREQ_DEBUG
+ bool "Debug CPUfreq Samsung driver core"
+ depends on ARM_S3C24XX_CPUFREQ
+ help
+ Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config ARM_S3C24XX_CPUFREQ_IODEBUG
+ bool "Debug CPUfreq Samsung driver IO timing"
+ depends on ARM_S3C24XX_CPUFREQ
+ help
+ Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
+config ARM_S3C24XX_CPUFREQ_DEBUGFS
+ bool "Export debugfs for CPUFreq"
+ depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS
+ help
+ Export status information via debugfs.
+
+config ARM_S3C2410_CPUFREQ
+ bool
+ depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410
+ select S3C2410_CPUFREQ_UTILS
+ help
+ CPU Frequency scaling support for S3C2410
+
+config ARM_S3C2412_CPUFREQ
+ bool
+ depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412
+ default y
+ select S3C2412_IOTIMING
+ help
+ CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
+
config ARM_S3C2416_CPUFREQ
bool "S3C2416 CPU Frequency scaling support"
depends on CPU_S3C2416
@@ -118,6 +168,14 @@ config ARM_S3C2416_CPUFREQ_VCORESCALE
If in doubt, say N.
+config ARM_S3C2440_CPUFREQ
+ bool "S3C2440/S3C2442 CPU Frequency scaling support"
+ depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442)
+ select S3C2410_CPUFREQ_UTILS
+ default y
+ help
+ CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
config ARM_S3C64XX_CPUFREQ
bool "Samsung S3C64XX"
depends on CPU_S3C6410
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 315b9231feb1..6ad0b913ca17 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -65,7 +65,12 @@ obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
obj-$(CONFIG_PXA25x) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA27x) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
+obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
+obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
+obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c b/drivers/cpufreq/s3c2410-cpufreq.c
index cfa0dd8723ec..cfa0dd8723ec 100644
--- a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
+++ b/drivers/cpufreq/s3c2410-cpufreq.c
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c b/drivers/cpufreq/s3c2412-cpufreq.c
index 8bf0f3a77476..4645b4898996 100644
--- a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
+++ b/drivers/cpufreq/s3c2412-cpufreq.c
@@ -25,13 +25,12 @@
#include <asm/mach/map.h>
#include <mach/regs-clock.h>
+#include <mach/s3c2412.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/cpu-freq-core.h>
-#include "s3c2412.h"
-
/* our clock resources. */
static struct clk *xtal;
static struct clk *fclk;
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c b/drivers/cpufreq/s3c2440-cpufreq.c
index 72b2cc8a5a85..72b2cc8a5a85 100644
--- a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
+++ b/drivers/cpufreq/s3c2440-cpufreq.c
diff --git a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
index 9b7b4289d66c..9b7b4289d66c 100644
--- a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
diff --git a/arch/arm/mach-s3c24xx/cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
index 3c0e78ede0da..3c0e78ede0da 100644
--- a/arch/arm/mach-s3c24xx/cpufreq.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq.c
diff --git a/drivers/crypto/ux500/cryp/cryp.c b/drivers/crypto/ux500/cryp/cryp.c
index 3eafa903ebcd..43a0c8a26ab0 100644
--- a/drivers/crypto/ux500/cryp/cryp.c
+++ b/drivers/crypto/ux500/cryp/cryp.c
@@ -291,7 +291,7 @@ void cryp_save_device_context(struct cryp_device_data *device_data,
int cryp_mode)
{
enum cryp_algo_mode algomode;
- struct cryp_register *src_reg = device_data->base;
+ struct cryp_register __iomem *src_reg = device_data->base;
struct cryp_config *config =
(struct cryp_config *)device_data->current_ctx;
@@ -349,7 +349,7 @@ void cryp_save_device_context(struct cryp_device_data *device_data,
void cryp_restore_device_context(struct cryp_device_data *device_data,
struct cryp_device_context *ctx)
{
- struct cryp_register *reg = device_data->base;
+ struct cryp_register __iomem *reg = device_data->base;
struct cryp_config *config =
(struct cryp_config *)device_data->current_ctx;
diff --git a/drivers/crypto/ux500/cryp/cryp.h b/drivers/crypto/ux500/cryp/cryp.h
index 14cfd05b777a..d1d6606fe56c 100644
--- a/drivers/crypto/ux500/cryp/cryp.h
+++ b/drivers/crypto/ux500/cryp/cryp.h
@@ -114,6 +114,9 @@ enum cryp_status_id {
};
/* Cryp DMA interface */
+#define CRYP_DMA_TX_FIFO 0x08
+#define CRYP_DMA_RX_FIFO 0x10
+
enum cryp_dma_req_type {
CRYP_DMA_DISABLE_BOTH,
CRYP_DMA_ENABLE_IN_DATA,
@@ -217,7 +220,8 @@ struct cryp_dma {
/**
* struct cryp_device_data - structure for a cryp device.
- * @base: Pointer to the hardware base address.
+ * @base: Pointer to virtual base address of the cryp device.
+ * @phybase: Pointer to physical memory location of the cryp device.
* @dev: Pointer to the devices dev structure.
* @clk: Pointer to the device's clock control.
* @pwr_regulator: Pointer to the device's power control.
@@ -232,6 +236,7 @@ struct cryp_dma {
*/
struct cryp_device_data {
struct cryp_register __iomem *base;
+ phys_addr_t phybase;
struct device *dev;
struct clk *clk;
struct regulator *pwr_regulator;
diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c
index 8c2777cf02f6..83d79b964d12 100644
--- a/drivers/crypto/ux500/cryp/cryp_core.c
+++ b/drivers/crypto/ux500/cryp/cryp_core.c
@@ -475,6 +475,19 @@ static int cryp_get_device_data(struct cryp_ctx *ctx,
static void cryp_dma_setup_channel(struct cryp_device_data *device_data,
struct device *dev)
{
+ struct dma_slave_config mem2cryp = {
+ .direction = DMA_MEM_TO_DEV,
+ .dst_addr = device_data->phybase + CRYP_DMA_TX_FIFO,
+ .dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
+ .dst_maxburst = 4,
+ };
+ struct dma_slave_config cryp2mem = {
+ .direction = DMA_DEV_TO_MEM,
+ .src_addr = device_data->phybase + CRYP_DMA_RX_FIFO,
+ .src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
+ .src_maxburst = 4,
+ };
+
dma_cap_zero(device_data->dma.mask);
dma_cap_set(DMA_SLAVE, device_data->dma.mask);
@@ -490,6 +503,9 @@ static void cryp_dma_setup_channel(struct cryp_device_data *device_data,
stedma40_filter,
device_data->dma.cfg_cryp2mem);
+ dmaengine_slave_config(device_data->dma.chan_mem2cryp, &mem2cryp);
+ dmaengine_slave_config(device_data->dma.chan_cryp2mem, &cryp2mem);
+
init_completion(&device_data->dma.cryp_dma_complete);
}
@@ -537,10 +553,10 @@ static int cryp_set_dma_transfer(struct cryp_ctx *ctx,
dev_dbg(ctx->device->dev, "[%s]: Setting up DMA for buffer "
"(TO_DEVICE)", __func__);
- desc = channel->device->device_prep_slave_sg(channel,
- ctx->device->dma.sg_src,
- ctx->device->dma.sg_src_len,
- direction, DMA_CTRL_ACK, NULL);
+ desc = dmaengine_prep_slave_sg(channel,
+ ctx->device->dma.sg_src,
+ ctx->device->dma.sg_src_len,
+ direction, DMA_CTRL_ACK);
break;
case DMA_FROM_DEVICE:
@@ -561,12 +577,12 @@ static int cryp_set_dma_transfer(struct cryp_ctx *ctx,
dev_dbg(ctx->device->dev, "[%s]: Setting up DMA for buffer "
"(FROM_DEVICE)", __func__);
- desc = channel->device->device_prep_slave_sg(channel,
- ctx->device->dma.sg_dst,
- ctx->device->dma.sg_dst_len,
- direction,
- DMA_CTRL_ACK |
- DMA_PREP_INTERRUPT, NULL);
+ desc = dmaengine_prep_slave_sg(channel,
+ ctx->device->dma.sg_dst,
+ ctx->device->dma.sg_dst_len,
+ direction,
+ DMA_CTRL_ACK |
+ DMA_PREP_INTERRUPT);
desc->callback = cryp_dma_out_callback;
desc->callback_param = ctx;
@@ -578,7 +594,7 @@ static int cryp_set_dma_transfer(struct cryp_ctx *ctx,
return -EFAULT;
}
- cookie = desc->tx_submit(desc);
+ cookie = dmaengine_submit(desc);
dma_async_issue_pending(channel);
return 0;
@@ -591,12 +607,12 @@ static void cryp_dma_done(struct cryp_ctx *ctx)
dev_dbg(ctx->device->dev, "[%s]: ", __func__);
chan = ctx->device->dma.chan_mem2cryp;
- chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
+ dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
dma_unmap_sg(chan->device->dev, ctx->device->dma.sg_src,
ctx->device->dma.sg_src_len, DMA_TO_DEVICE);
chan = ctx->device->dma.chan_cryp2mem;
- chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
+ dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
dma_unmap_sg(chan->device->dev, ctx->device->dma.sg_dst,
ctx->device->dma.sg_dst_len, DMA_FROM_DEVICE);
}
@@ -1431,6 +1447,7 @@ static int ux500_cryp_probe(struct platform_device *pdev)
goto out_kfree;
}
+ device_data->phybase = res->start;
device_data->base = ioremap(res->start, resource_size(res));
if (!device_data->base) {
dev_err(dev, "[%s]: ioremap failed!", __func__);
@@ -1458,11 +1475,17 @@ static int ux500_cryp_probe(struct platform_device *pdev)
goto out_regulator;
}
+ ret = clk_prepare(device_data->clk);
+ if (ret) {
+ dev_err(dev, "[%s]: clk_prepare() failed!", __func__);
+ goto out_clk;
+ }
+
/* Enable device power (and clock) */
ret = cryp_enable_power(device_data->dev, device_data, false);
if (ret) {
dev_err(dev, "[%s]: cryp_enable_power() failed!", __func__);
- goto out_clk;
+ goto out_clk_unprepare;
}
cryp_error = cryp_check(device_data);
@@ -1518,11 +1541,16 @@ static int ux500_cryp_probe(struct platform_device *pdev)
goto out_power;
}
+ dev_info(dev, "successfully registered\n");
+
return 0;
out_power:
cryp_disable_power(device_data->dev, device_data, false);
+out_clk_unprepare:
+ clk_unprepare(device_data->clk);
+
out_clk:
clk_put(device_data->clk);
@@ -1593,6 +1621,7 @@ static int ux500_cryp_remove(struct platform_device *pdev)
dev_err(&pdev->dev, "[%s]: cryp_disable_power() failed",
__func__);
+ clk_unprepare(device_data->clk);
clk_put(device_data->clk);
regulator_put(device_data->pwr_regulator);
diff --git a/drivers/crypto/ux500/hash/hash_alg.h b/drivers/crypto/ux500/hash/hash_alg.h
index cd9351cb24df..be6eb54da40f 100644
--- a/drivers/crypto/ux500/hash/hash_alg.h
+++ b/drivers/crypto/ux500/hash/hash_alg.h
@@ -11,6 +11,7 @@
#include <linux/bitops.h>
#define HASH_BLOCK_SIZE 64
+#define HASH_DMA_FIFO 4
#define HASH_DMA_ALIGN_SIZE 4
#define HASH_DMA_PERFORMANCE_MIN_SIZE 1024
#define HASH_BYTES_PER_WORD 4
@@ -347,7 +348,8 @@ struct hash_req_ctx {
/**
* struct hash_device_data - structure for a hash device.
- * @base: Pointer to the hardware base address.
+ * @base: Pointer to virtual base address of the hash device.
+ * @phybase: Pointer to physical memory location of the hash device.
* @list_node: For inclusion in klist.
* @dev: Pointer to the device dev structure.
* @ctx_lock: Spinlock for current_ctx.
@@ -361,6 +363,7 @@ struct hash_req_ctx {
*/
struct hash_device_data {
struct hash_register __iomem *base;
+ phys_addr_t phybase;
struct klist_node list_node;
struct device *dev;
struct spinlock ctx_lock;
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 3b8f661d0edf..496ae6aae316 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -122,6 +122,13 @@ static void hash_dma_setup_channel(struct hash_device_data *device_data,
struct device *dev)
{
struct hash_platform_data *platform_data = dev->platform_data;
+ struct dma_slave_config conf = {
+ .direction = DMA_MEM_TO_DEV,
+ .dst_addr = device_data->phybase + HASH_DMA_FIFO,
+ .dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
+ .dst_maxburst = 16,
+ };
+
dma_cap_zero(device_data->dma.mask);
dma_cap_set(DMA_SLAVE, device_data->dma.mask);
@@ -131,6 +138,8 @@ static void hash_dma_setup_channel(struct hash_device_data *device_data,
platform_data->dma_filter,
device_data->dma.cfg_mem2hash);
+ dmaengine_slave_config(device_data->dma.chan_mem2hash, &conf);
+
init_completion(&device_data->dma.complete);
}
@@ -171,9 +180,9 @@ static int hash_set_dma_transfer(struct hash_ctx *ctx, struct scatterlist *sg,
dev_dbg(ctx->device->dev, "[%s]: Setting up DMA for buffer "
"(TO_DEVICE)", __func__);
- desc = channel->device->device_prep_slave_sg(channel,
+ desc = dmaengine_prep_slave_sg(channel,
ctx->device->dma.sg, ctx->device->dma.sg_len,
- direction, DMA_CTRL_ACK | DMA_PREP_INTERRUPT, NULL);
+ direction, DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
if (!desc) {
dev_err(ctx->device->dev,
"[%s]: device_prep_slave_sg() failed!", __func__);
@@ -183,7 +192,7 @@ static int hash_set_dma_transfer(struct hash_ctx *ctx, struct scatterlist *sg,
desc->callback = hash_dma_callback;
desc->callback_param = ctx;
- cookie = desc->tx_submit(desc);
+ cookie = dmaengine_submit(desc);
dma_async_issue_pending(channel);
return 0;
@@ -194,7 +203,7 @@ static void hash_dma_done(struct hash_ctx *ctx)
struct dma_chan *chan;
chan = ctx->device->dma.chan_mem2hash;
- chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
+ dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
dma_unmap_sg(chan->device->dev, ctx->device->dma.sg,
ctx->device->dma.sg_len, DMA_TO_DEVICE);
@@ -464,12 +473,12 @@ static void hash_hw_write_key(struct hash_device_data *device_data,
HASH_SET_DIN(&word, nwords);
}
- while (device_data->base->str & HASH_STR_DCAL_MASK)
+ while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
cpu_relax();
HASH_SET_DCAL;
- while (device_data->base->str & HASH_STR_DCAL_MASK)
+ while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
cpu_relax();
}
@@ -652,7 +661,7 @@ static void hash_messagepad(struct hash_device_data *device_data,
if (index_bytes)
HASH_SET_DIN(message, nwords);
- while (device_data->base->str & HASH_STR_DCAL_MASK)
+ while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
cpu_relax();
/* num_of_bytes == 0 => NBLW <- 0 (32 bits valid in DATAIN) */
@@ -667,7 +676,7 @@ static void hash_messagepad(struct hash_device_data *device_data,
(int)(readl_relaxed(&device_data->base->str) &
HASH_STR_NBLW_MASK));
- while (device_data->base->str & HASH_STR_DCAL_MASK)
+ while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
cpu_relax();
}
@@ -767,7 +776,7 @@ void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx)
/* HW and SW initializations */
/* Note: there is no need to initialize buffer and digest members */
- while (device_data->base->str & HASH_STR_DCAL_MASK)
+ while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
cpu_relax();
/*
@@ -783,8 +792,7 @@ void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx)
HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
}
-int hash_process_data(
- struct hash_device_data *device_data,
+static int hash_process_data(struct hash_device_data *device_data,
struct hash_ctx *ctx, struct hash_req_ctx *req_ctx,
int msg_length, u8 *data_buffer, u8 *buffer, u8 *index)
{
@@ -953,7 +961,7 @@ static int hash_dma_final(struct ahash_request *req)
wait_for_completion(&ctx->device->dma.complete);
hash_dma_done(ctx);
- while (device_data->base->str & HASH_STR_DCAL_MASK)
+ while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
cpu_relax();
if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC && ctx->key) {
@@ -983,7 +991,7 @@ out:
* hash_hw_final - The final hash calculation function
* @req: The hash request for the job.
*/
-int hash_hw_final(struct ahash_request *req)
+static int hash_hw_final(struct ahash_request *req)
{
int ret = 0;
struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
@@ -1051,7 +1059,7 @@ int hash_hw_final(struct ahash_request *req)
req_ctx->state.index);
} else {
HASH_SET_DCAL;
- while (device_data->base->str & HASH_STR_DCAL_MASK)
+ while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
cpu_relax();
}
@@ -1180,7 +1188,7 @@ int hash_resume_state(struct hash_device_data *device_data,
temp_cr = device_state->temp_cr;
writel_relaxed(temp_cr & HASH_CR_RESUME_MASK, &device_data->base->cr);
- if (device_data->base->cr & HASH_CR_MODE_MASK)
+ if (readl(&device_data->base->cr) & HASH_CR_MODE_MASK)
hash_mode = HASH_OPER_MODE_HMAC;
else
hash_mode = HASH_OPER_MODE_HASH;
@@ -1224,7 +1232,7 @@ int hash_save_state(struct hash_device_data *device_data,
* actually makes sure that there isn't any ongoing calculation in the
* hardware.
*/
- while (device_data->base->str & HASH_STR_DCAL_MASK)
+ while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
cpu_relax();
temp_cr = readl_relaxed(&device_data->base->cr);
@@ -1233,7 +1241,7 @@ int hash_save_state(struct hash_device_data *device_data,
device_state->din_reg = readl_relaxed(&device_data->base->din);
- if (device_data->base->cr & HASH_CR_MODE_MASK)
+ if (readl(&device_data->base->cr) & HASH_CR_MODE_MASK)
hash_mode = HASH_OPER_MODE_HMAC;
else
hash_mode = HASH_OPER_MODE_HASH;
@@ -1699,6 +1707,7 @@ static int ux500_hash_probe(struct platform_device *pdev)
goto out_kfree;
}
+ device_data->phybase = res->start;
device_data->base = ioremap(res->start, resource_size(res));
if (!device_data->base) {
dev_err(dev, "[%s] ioremap() failed!",
@@ -1726,11 +1735,17 @@ static int ux500_hash_probe(struct platform_device *pdev)
goto out_regulator;
}
+ ret = clk_prepare(device_data->clk);
+ if (ret) {
+ dev_err(dev, "[%s] clk_prepare() failed!", __func__);
+ goto out_clk;
+ }
+
/* Enable device power (and clock) */
ret = hash_enable_power(device_data, false);
if (ret) {
dev_err(dev, "[%s]: hash_enable_power() failed!", __func__);
- goto out_clk;
+ goto out_clk_unprepare;
}
ret = hash_check_hw(device_data);
@@ -1756,12 +1771,15 @@ static int ux500_hash_probe(struct platform_device *pdev)
goto out_power;
}
- dev_info(dev, "[%s] successfully probed\n", __func__);
+ dev_info(dev, "successfully registered\n");
return 0;
out_power:
hash_disable_power(device_data, false);
+out_clk_unprepare:
+ clk_unprepare(device_data->clk);
+
out_clk:
clk_put(device_data->clk);
@@ -1826,6 +1844,7 @@ static int ux500_hash_remove(struct platform_device *pdev)
dev_err(dev, "[%s]: hash_disable_power() failed",
__func__);
+ clk_unprepare(device_data->clk);
clk_put(device_data->clk);
regulator_put(device_data->regulator);
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 71bf4ec300ea..5ab5880d5c90 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -17,6 +17,8 @@
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_dma.h>
#include <linux/amba/bus.h>
#include <linux/regulator/consumer.h>
#include <linux/platform_data/dma-ste-dma40.h>
@@ -45,15 +47,63 @@
#define D40_LCLA_LINK_PER_EVENT_GRP 128
#define D40_LCLA_END D40_LCLA_LINK_PER_EVENT_GRP
+/* Max number of logical channels per physical channel */
+#define D40_MAX_LOG_CHAN_PER_PHY 32
+
/* Attempts before giving up to trying to get pages that are aligned */
#define MAX_LCLA_ALLOC_ATTEMPTS 256
/* Bit markings for allocation map */
-#define D40_ALLOC_FREE (1 << 31)
-#define D40_ALLOC_PHY (1 << 30)
+#define D40_ALLOC_FREE BIT(31)
+#define D40_ALLOC_PHY BIT(30)
#define D40_ALLOC_LOG_FREE 0
-#define MAX(a, b) (((a) < (b)) ? (b) : (a))
+#define D40_MEMCPY_MAX_CHANS 8
+
+/* Reserved event lines for memcpy only. */
+#define DB8500_DMA_MEMCPY_EV_0 51
+#define DB8500_DMA_MEMCPY_EV_1 56
+#define DB8500_DMA_MEMCPY_EV_2 57
+#define DB8500_DMA_MEMCPY_EV_3 58
+#define DB8500_DMA_MEMCPY_EV_4 59
+#define DB8500_DMA_MEMCPY_EV_5 60
+
+static int dma40_memcpy_channels[] = {
+ DB8500_DMA_MEMCPY_EV_0,
+ DB8500_DMA_MEMCPY_EV_1,
+ DB8500_DMA_MEMCPY_EV_2,
+ DB8500_DMA_MEMCPY_EV_3,
+ DB8500_DMA_MEMCPY_EV_4,
+ DB8500_DMA_MEMCPY_EV_5,
+};
+
+/* Default configuration for physcial memcpy */
+static struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
+ .mode = STEDMA40_MODE_PHYSICAL,
+ .dir = DMA_MEM_TO_MEM,
+
+ .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
+ .src_info.psize = STEDMA40_PSIZE_PHY_1,
+ .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+
+ .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
+ .dst_info.psize = STEDMA40_PSIZE_PHY_1,
+ .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+};
+
+/* Default configuration for logical memcpy */
+static struct stedma40_chan_cfg dma40_memcpy_conf_log = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = DMA_MEM_TO_MEM,
+
+ .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
+ .src_info.psize = STEDMA40_PSIZE_LOG_1,
+ .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+
+ .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_1,
+ .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+};
/**
* enum 40_command - The different commands and/or statuses.
@@ -171,6 +221,9 @@ static u32 d40_backup_regs_chan[] = {
D40_CHAN_REG_SDLNK,
};
+#define BACKUP_REGS_SZ_MAX ((BACKUP_REGS_SZ_V4A > BACKUP_REGS_SZ_V4B) ? \
+ BACKUP_REGS_SZ_V4A : BACKUP_REGS_SZ_V4B)
+
/**
* struct d40_interrupt_lookup - lookup table for interrupt handler
*
@@ -471,6 +524,8 @@ struct d40_gen_dmac {
* @phy_start: Physical memory start of the DMA registers.
* @phy_size: Size of the DMA register map.
* @irq: The IRQ number.
+ * @num_memcpy_chans: The number of channels used for memcpy (mem-to-mem
+ * transfers).
* @num_phy_chans: The number of physical channels. Read from HW. This
* is the number of available channels for this driver, not counting "Secure
* mode" allocated physical channels.
@@ -514,6 +569,7 @@ struct d40_base {
phys_addr_t phy_start;
resource_size_t phy_size;
int irq;
+ int num_memcpy_chans;
int num_phy_chans;
int num_log_chans;
struct device_dma_parameters dma_parms;
@@ -534,7 +590,7 @@ struct d40_base {
resource_size_t lcpa_size;
struct kmem_cache *desc_slab;
u32 reg_val_backup[BACKUP_REGS_SZ];
- u32 reg_val_backup_v4[MAX(BACKUP_REGS_SZ_V4A, BACKUP_REGS_SZ_V4B)];
+ u32 reg_val_backup_v4[BACKUP_REGS_SZ_MAX];
u32 *reg_val_backup_chan;
u16 gcc_pwr_off_mask;
bool initialized;
@@ -792,7 +848,7 @@ static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc)
* that uses linked lists.
*/
if (!(chan->phy_chan->use_soft_lli &&
- chan->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM))
+ chan->dma_cfg.dir == DMA_DEV_TO_MEM))
curr_lcla = d40_lcla_alloc_one(chan, desc);
first_lcla = curr_lcla;
@@ -954,20 +1010,21 @@ static int d40_psize_2_burst_size(bool is_log, int psize)
/*
* The dma only supports transmitting packages up to
- * STEDMA40_MAX_SEG_SIZE << data_width. Calculate the total number of
- * dma elements required to send the entire sg list
+ * STEDMA40_MAX_SEG_SIZE * data_width, where data_width is stored in Bytes.
+ *
+ * Calculate the total number of dma elements required to send the entire sg list.
*/
static int d40_size_2_dmalen(int size, u32 data_width1, u32 data_width2)
{
int dmalen;
u32 max_w = max(data_width1, data_width2);
u32 min_w = min(data_width1, data_width2);
- u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE << min_w, 1 << max_w);
+ u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w);
if (seg_max > STEDMA40_MAX_SEG_SIZE)
- seg_max -= (1 << max_w);
+ seg_max -= max_w;
- if (!IS_ALIGNED(size, 1 << max_w))
+ if (!IS_ALIGNED(size, max_w))
return -EINVAL;
if (size <= seg_max)
@@ -1257,21 +1314,17 @@ static void __d40_config_set_event(struct d40_chan *d40c,
static void d40_config_set_event(struct d40_chan *d40c,
enum d40_events event_type)
{
- /* Enable event line connected to device (or memcpy) */
- if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) ||
- (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH)) {
- u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.src_dev_type);
+ u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
+ /* Enable event line connected to device (or memcpy) */
+ if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
+ (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
__d40_config_set_event(d40c, event_type, event,
D40_CHAN_REG_SSLNK);
- }
-
- if (d40c->dma_cfg.dir != STEDMA40_PERIPH_TO_MEM) {
- u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type);
+ if (d40c->dma_cfg.dir != DMA_DEV_TO_MEM)
__d40_config_set_event(d40c, event_type, event,
D40_CHAN_REG_SDLNK);
- }
}
static u32 d40_chan_has_events(struct d40_chan *d40c)
@@ -1417,7 +1470,7 @@ static u32 d40_residue(struct d40_chan *d40c)
>> D40_SREG_ELEM_PHY_ECNT_POS;
}
- return num_elt * (1 << d40c->dma_cfg.dst_info.data_width);
+ return num_elt * d40c->dma_cfg.dst_info.data_width;
}
static bool d40_tx_is_linked(struct d40_chan *d40c)
@@ -1693,7 +1746,7 @@ static irqreturn_t d40_handle_interrupt(int irq, void *data)
}
/* ACK interrupt */
- writel(1 << idx, base->virtbase + il[row].clr);
+ writel(BIT(idx), base->virtbase + il[row].clr);
spin_lock(&d40c->lock);
@@ -1715,8 +1768,6 @@ static int d40_validate_conf(struct d40_chan *d40c,
struct stedma40_chan_cfg *conf)
{
int res = 0;
- u32 dst_event_group = D40_TYPE_TO_GROUP(conf->dst_dev_type);
- u32 src_event_group = D40_TYPE_TO_GROUP(conf->src_dev_type);
bool is_log = conf->mode == STEDMA40_MODE_LOGICAL;
if (!conf->dir) {
@@ -1724,48 +1775,14 @@ static int d40_validate_conf(struct d40_chan *d40c,
res = -EINVAL;
}
- if (conf->dst_dev_type != STEDMA40_DEV_DST_MEMORY &&
- d40c->base->plat_data->dev_tx[conf->dst_dev_type] == 0 &&
- d40c->runtime_addr == 0) {
-
- chan_err(d40c, "Invalid TX channel address (%d)\n",
- conf->dst_dev_type);
- res = -EINVAL;
- }
-
- if (conf->src_dev_type != STEDMA40_DEV_SRC_MEMORY &&
- d40c->base->plat_data->dev_rx[conf->src_dev_type] == 0 &&
- d40c->runtime_addr == 0) {
- chan_err(d40c, "Invalid RX channel address (%d)\n",
- conf->src_dev_type);
- res = -EINVAL;
- }
-
- if (conf->dir == STEDMA40_MEM_TO_PERIPH &&
- dst_event_group == STEDMA40_DEV_DST_MEMORY) {
- chan_err(d40c, "Invalid dst\n");
+ if ((is_log && conf->dev_type > d40c->base->num_log_chans) ||
+ (!is_log && conf->dev_type > d40c->base->num_phy_chans) ||
+ (conf->dev_type < 0)) {
+ chan_err(d40c, "Invalid device type (%d)\n", conf->dev_type);
res = -EINVAL;
}
- if (conf->dir == STEDMA40_PERIPH_TO_MEM &&
- src_event_group == STEDMA40_DEV_SRC_MEMORY) {
- chan_err(d40c, "Invalid src\n");
- res = -EINVAL;
- }
-
- if (src_event_group == STEDMA40_DEV_SRC_MEMORY &&
- dst_event_group == STEDMA40_DEV_DST_MEMORY && is_log) {
- chan_err(d40c, "No event line\n");
- res = -EINVAL;
- }
-
- if (conf->dir == STEDMA40_PERIPH_TO_PERIPH &&
- (src_event_group != dst_event_group)) {
- chan_err(d40c, "Invalid event group\n");
- res = -EINVAL;
- }
-
- if (conf->dir == STEDMA40_PERIPH_TO_PERIPH) {
+ if (conf->dir == DMA_DEV_TO_DEV) {
/*
* DMAC HW supports it. Will be added to this driver,
* in case any dma client requires it.
@@ -1775,9 +1792,9 @@ static int d40_validate_conf(struct d40_chan *d40c,
}
if (d40_psize_2_burst_size(is_log, conf->src_info.psize) *
- (1 << conf->src_info.data_width) !=
+ conf->src_info.data_width !=
d40_psize_2_burst_size(is_log, conf->dst_info.psize) *
- (1 << conf->dst_info.data_width)) {
+ conf->dst_info.data_width) {
/*
* The DMAC hardware only supports
* src (burst x width) == dst (burst x width)
@@ -1819,8 +1836,8 @@ static bool d40_alloc_mask_set(struct d40_phy_res *phy,
if (phy->allocated_src == D40_ALLOC_FREE)
phy->allocated_src = D40_ALLOC_LOG_FREE;
- if (!(phy->allocated_src & (1 << log_event_line))) {
- phy->allocated_src |= 1 << log_event_line;
+ if (!(phy->allocated_src & BIT(log_event_line))) {
+ phy->allocated_src |= BIT(log_event_line);
goto found;
} else
goto not_found;
@@ -1831,8 +1848,8 @@ static bool d40_alloc_mask_set(struct d40_phy_res *phy,
if (phy->allocated_dst == D40_ALLOC_FREE)
phy->allocated_dst = D40_ALLOC_LOG_FREE;
- if (!(phy->allocated_dst & (1 << log_event_line))) {
- phy->allocated_dst |= 1 << log_event_line;
+ if (!(phy->allocated_dst & BIT(log_event_line))) {
+ phy->allocated_dst |= BIT(log_event_line);
goto found;
} else
goto not_found;
@@ -1862,11 +1879,11 @@ static bool d40_alloc_mask_free(struct d40_phy_res *phy, bool is_src,
/* Logical channel */
if (is_src) {
- phy->allocated_src &= ~(1 << log_event_line);
+ phy->allocated_src &= ~BIT(log_event_line);
if (phy->allocated_src == D40_ALLOC_LOG_FREE)
phy->allocated_src = D40_ALLOC_FREE;
} else {
- phy->allocated_dst &= ~(1 << log_event_line);
+ phy->allocated_dst &= ~BIT(log_event_line);
if (phy->allocated_dst == D40_ALLOC_LOG_FREE)
phy->allocated_dst = D40_ALLOC_FREE;
}
@@ -1882,7 +1899,7 @@ out:
static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
{
- int dev_type;
+ int dev_type = d40c->dma_cfg.dev_type;
int event_group;
int event_line;
struct d40_phy_res *phys;
@@ -1896,14 +1913,12 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
phys = d40c->base->phy_res;
num_phy_chans = d40c->base->num_phy_chans;
- if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) {
- dev_type = d40c->dma_cfg.src_dev_type;
+ if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
log_num = 2 * dev_type;
is_src = true;
- } else if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
- d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
+ } else if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
+ d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
/* dst event lines are used for logical memcpy */
- dev_type = d40c->dma_cfg.dst_dev_type;
log_num = 2 * dev_type + 1;
is_src = false;
} else
@@ -1913,7 +1928,7 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
event_line = D40_TYPE_TO_EVENT(dev_type);
if (!is_log) {
- if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
+ if (d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
/* Find physical half channel */
if (d40c->dma_cfg.use_fixed_channel) {
i = d40c->dma_cfg.phy_channel;
@@ -2014,14 +2029,23 @@ static int d40_config_memcpy(struct d40_chan *d40c)
dma_cap_mask_t cap = d40c->chan.device->cap_mask;
if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) {
- d40c->dma_cfg = *d40c->base->plat_data->memcpy_conf_log;
- d40c->dma_cfg.src_dev_type = STEDMA40_DEV_SRC_MEMORY;
- d40c->dma_cfg.dst_dev_type = d40c->base->plat_data->
- memcpy[d40c->chan.chan_id];
+ d40c->dma_cfg = dma40_memcpy_conf_log;
+ d40c->dma_cfg.dev_type = dma40_memcpy_channels[d40c->chan.chan_id];
+
+ d40_log_cfg(&d40c->dma_cfg,
+ &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
} else if (dma_has_cap(DMA_MEMCPY, cap) &&
dma_has_cap(DMA_SLAVE, cap)) {
- d40c->dma_cfg = *d40c->base->plat_data->memcpy_conf_phy;
+ d40c->dma_cfg = dma40_memcpy_conf_phy;
+
+ /* Generate interrrupt at end of transfer or relink. */
+ d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS);
+
+ /* Generate interrupt on error. */
+ d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
+ d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
+
} else {
chan_err(d40c, "No memcpy\n");
return -EINVAL;
@@ -2034,7 +2058,7 @@ static int d40_free_dma(struct d40_chan *d40c)
{
int res = 0;
- u32 event;
+ u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
struct d40_phy_res *phy = d40c->phy_chan;
bool is_src;
@@ -2052,14 +2076,12 @@ static int d40_free_dma(struct d40_chan *d40c)
return -EINVAL;
}
- if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
- d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
- event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type);
+ if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
+ d40c->dma_cfg.dir == DMA_MEM_TO_MEM)
is_src = false;
- } else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) {
- event = D40_TYPE_TO_EVENT(d40c->dma_cfg.src_dev_type);
+ else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
is_src = true;
- } else {
+ else {
chan_err(d40c, "Unknown direction\n");
return -EINVAL;
}
@@ -2100,7 +2122,7 @@ static bool d40_is_paused(struct d40_chan *d40c)
unsigned long flags;
void __iomem *active_reg;
u32 status;
- u32 event;
+ u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
spin_lock_irqsave(&d40c->lock, flags);
@@ -2119,12 +2141,10 @@ static bool d40_is_paused(struct d40_chan *d40c)
goto _exit;
}
- if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
- d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
- event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type);
+ if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
+ d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
status = readl(chanbase + D40_CHAN_REG_SDLNK);
- } else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) {
- event = D40_TYPE_TO_EVENT(d40c->dma_cfg.src_dev_type);
+ } else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
status = readl(chanbase + D40_CHAN_REG_SSLNK);
} else {
chan_err(d40c, "Unknown direction\n");
@@ -2255,24 +2275,6 @@ err:
return NULL;
}
-static dma_addr_t
-d40_get_dev_addr(struct d40_chan *chan, enum dma_transfer_direction direction)
-{
- struct stedma40_platform_data *plat = chan->base->plat_data;
- struct stedma40_chan_cfg *cfg = &chan->dma_cfg;
- dma_addr_t addr = 0;
-
- if (chan->runtime_addr)
- return chan->runtime_addr;
-
- if (direction == DMA_DEV_TO_MEM)
- addr = plat->dev_rx[cfg->src_dev_type];
- else if (direction == DMA_MEM_TO_DEV)
- addr = plat->dev_tx[cfg->dst_dev_type];
-
- return addr;
-}
-
static struct dma_async_tx_descriptor *
d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src,
struct scatterlist *sg_dst, unsigned int sg_len,
@@ -2299,14 +2301,10 @@ d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src,
if (sg_next(&sg_src[sg_len - 1]) == sg_src)
desc->cyclic = true;
- if (direction != DMA_TRANS_NONE) {
- dma_addr_t dev_addr = d40_get_dev_addr(chan, direction);
-
- if (direction == DMA_DEV_TO_MEM)
- src_dev_addr = dev_addr;
- else if (direction == DMA_MEM_TO_DEV)
- dst_dev_addr = dev_addr;
- }
+ if (direction == DMA_DEV_TO_MEM)
+ src_dev_addr = chan->runtime_addr;
+ else if (direction == DMA_MEM_TO_DEV)
+ dst_dev_addr = chan->runtime_addr;
if (chan_is_logical(chan))
ret = d40_prep_sg_log(chan, desc, sg_src, sg_dst,
@@ -2366,7 +2364,7 @@ static void __d40_set_prio_rt(struct d40_chan *d40c, int dev_type, bool src)
u32 rtreg;
u32 event = D40_TYPE_TO_EVENT(dev_type);
u32 group = D40_TYPE_TO_GROUP(dev_type);
- u32 bit = 1 << event;
+ u32 bit = BIT(event);
u32 prioreg;
struct d40_gen_dmac *dmac = &d40c->base->gen_dmac;
@@ -2397,13 +2395,57 @@ static void d40_set_prio_realtime(struct d40_chan *d40c)
if (d40c->base->rev < 3)
return;
- if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) ||
- (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
- __d40_set_prio_rt(d40c, d40c->dma_cfg.src_dev_type, true);
+ if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
+ (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
+ __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true);
- if ((d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH) ||
- (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
- __d40_set_prio_rt(d40c, d40c->dma_cfg.dst_dev_type, false);
+ if ((d40c->dma_cfg.dir == DMA_MEM_TO_DEV) ||
+ (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
+ __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false);
+}
+
+#define D40_DT_FLAGS_MODE(flags) ((flags >> 0) & 0x1)
+#define D40_DT_FLAGS_DIR(flags) ((flags >> 1) & 0x1)
+#define D40_DT_FLAGS_BIG_ENDIAN(flags) ((flags >> 2) & 0x1)
+#define D40_DT_FLAGS_FIXED_CHAN(flags) ((flags >> 3) & 0x1)
+
+static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct stedma40_chan_cfg cfg;
+ dma_cap_mask_t cap;
+ u32 flags;
+
+ memset(&cfg, 0, sizeof(struct stedma40_chan_cfg));
+
+ dma_cap_zero(cap);
+ dma_cap_set(DMA_SLAVE, cap);
+
+ cfg.dev_type = dma_spec->args[0];
+ flags = dma_spec->args[2];
+
+ switch (D40_DT_FLAGS_MODE(flags)) {
+ case 0: cfg.mode = STEDMA40_MODE_LOGICAL; break;
+ case 1: cfg.mode = STEDMA40_MODE_PHYSICAL; break;
+ }
+
+ switch (D40_DT_FLAGS_DIR(flags)) {
+ case 0:
+ cfg.dir = DMA_MEM_TO_DEV;
+ cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
+ break;
+ case 1:
+ cfg.dir = DMA_DEV_TO_MEM;
+ cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
+ break;
+ }
+
+ if (D40_DT_FLAGS_FIXED_CHAN(flags)) {
+ cfg.phy_channel = dma_spec->args[1];
+ cfg.use_fixed_channel = true;
+ }
+
+ return dma_request_channel(cap, stedma40_filter, &cfg);
}
/* DMA ENGINE functions */
@@ -2435,23 +2477,21 @@ static int d40_alloc_chan_resources(struct dma_chan *chan)
}
pm_runtime_get_sync(d40c->base->dev);
- /* Fill in basic CFG register values */
- d40_phy_cfg(&d40c->dma_cfg, &d40c->src_def_cfg,
- &d40c->dst_def_cfg, chan_is_logical(d40c));
d40_set_prio_realtime(d40c);
if (chan_is_logical(d40c)) {
- d40_log_cfg(&d40c->dma_cfg,
- &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
-
- if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM)
+ if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
d40c->lcpa = d40c->base->lcpa_base +
- d40c->dma_cfg.src_dev_type * D40_LCPA_CHAN_SIZE;
+ d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE;
else
d40c->lcpa = d40c->base->lcpa_base +
- d40c->dma_cfg.dst_dev_type *
+ d40c->dma_cfg.dev_type *
D40_LCPA_CHAN_SIZE + D40_LCPA_CHAN_DST_DELTA;
+
+ /* Unmask the Global Interrupt Mask. */
+ d40c->src_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS);
+ d40c->dst_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS);
}
dev_dbg(chan2dev(d40c), "allocated %s channel (phy %d%s)\n",
@@ -2641,33 +2681,10 @@ static void d40_terminate_all(struct dma_chan *chan)
static int
dma40_config_to_halfchannel(struct d40_chan *d40c,
struct stedma40_half_channel_info *info,
- enum dma_slave_buswidth width,
u32 maxburst)
{
- enum stedma40_periph_data_width addr_width;
int psize;
- switch (width) {
- case DMA_SLAVE_BUSWIDTH_1_BYTE:
- addr_width = STEDMA40_BYTE_WIDTH;
- break;
- case DMA_SLAVE_BUSWIDTH_2_BYTES:
- addr_width = STEDMA40_HALFWORD_WIDTH;
- break;
- case DMA_SLAVE_BUSWIDTH_4_BYTES:
- addr_width = STEDMA40_WORD_WIDTH;
- break;
- case DMA_SLAVE_BUSWIDTH_8_BYTES:
- addr_width = STEDMA40_DOUBLEWORD_WIDTH;
- break;
- default:
- dev_err(d40c->base->dev,
- "illegal peripheral address width "
- "requested (%d)\n",
- width);
- return -EINVAL;
- }
-
if (chan_is_logical(d40c)) {
if (maxburst >= 16)
psize = STEDMA40_PSIZE_LOG_16;
@@ -2688,7 +2705,6 @@ dma40_config_to_halfchannel(struct d40_chan *d40c,
psize = STEDMA40_PSIZE_PHY_1;
}
- info->data_width = addr_width;
info->psize = psize;
info->flow_ctrl = STEDMA40_NO_FLOW_CTRL;
@@ -2712,21 +2728,14 @@ static int d40_set_runtime_config(struct dma_chan *chan,
dst_maxburst = config->dst_maxburst;
if (config->direction == DMA_DEV_TO_MEM) {
- dma_addr_t dev_addr_rx =
- d40c->base->plat_data->dev_rx[cfg->src_dev_type];
-
config_addr = config->src_addr;
- if (dev_addr_rx)
- dev_dbg(d40c->base->dev,
- "channel has a pre-wired RX address %08x "
- "overriding with %08x\n",
- dev_addr_rx, config_addr);
- if (cfg->dir != STEDMA40_PERIPH_TO_MEM)
+
+ if (cfg->dir != DMA_DEV_TO_MEM)
dev_dbg(d40c->base->dev,
"channel was not configured for peripheral "
"to memory transfer (%d) overriding\n",
cfg->dir);
- cfg->dir = STEDMA40_PERIPH_TO_MEM;
+ cfg->dir = DMA_DEV_TO_MEM;
/* Configure the memory side */
if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
@@ -2735,21 +2744,14 @@ static int d40_set_runtime_config(struct dma_chan *chan,
dst_maxburst = src_maxburst;
} else if (config->direction == DMA_MEM_TO_DEV) {
- dma_addr_t dev_addr_tx =
- d40c->base->plat_data->dev_tx[cfg->dst_dev_type];
-
config_addr = config->dst_addr;
- if (dev_addr_tx)
- dev_dbg(d40c->base->dev,
- "channel has a pre-wired TX address %08x "
- "overriding with %08x\n",
- dev_addr_tx, config_addr);
- if (cfg->dir != STEDMA40_MEM_TO_PERIPH)
+
+ if (cfg->dir != DMA_MEM_TO_DEV)
dev_dbg(d40c->base->dev,
"channel was not configured for memory "
"to peripheral transfer (%d) overriding\n",
cfg->dir);
- cfg->dir = STEDMA40_MEM_TO_PERIPH;
+ cfg->dir = DMA_MEM_TO_DEV;
/* Configure the memory side */
if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
@@ -2763,6 +2765,11 @@ static int d40_set_runtime_config(struct dma_chan *chan,
return -EINVAL;
}
+ if (config_addr <= 0) {
+ dev_err(d40c->base->dev, "no address supplied\n");
+ return -EINVAL;
+ }
+
if (src_maxburst * src_addr_width != dst_maxburst * dst_addr_width) {
dev_err(d40c->base->dev,
"src/dst width/maxburst mismatch: %d*%d != %d*%d\n",
@@ -2781,14 +2788,24 @@ static int d40_set_runtime_config(struct dma_chan *chan,
src_maxburst = dst_maxburst * dst_addr_width / src_addr_width;
}
+ /* Only valid widths are; 1, 2, 4 and 8. */
+ if (src_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
+ src_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES ||
+ dst_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
+ dst_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES ||
+ ((src_addr_width > 1) && (src_addr_width & 1)) ||
+ ((dst_addr_width > 1) && (dst_addr_width & 1)))
+ return -EINVAL;
+
+ cfg->src_info.data_width = src_addr_width;
+ cfg->dst_info.data_width = dst_addr_width;
+
ret = dma40_config_to_halfchannel(d40c, &cfg->src_info,
- src_addr_width,
src_maxburst);
if (ret)
return ret;
ret = dma40_config_to_halfchannel(d40c, &cfg->dst_info,
- dst_addr_width,
dst_maxburst);
if (ret)
return ret;
@@ -2797,8 +2814,7 @@ static int d40_set_runtime_config(struct dma_chan *chan,
if (chan_is_logical(d40c))
d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
else
- d40_phy_cfg(cfg, &d40c->src_def_cfg,
- &d40c->dst_def_cfg, false);
+ d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg);
/* These settings will take precedence later */
d40c->runtime_addr = config_addr;
@@ -2929,7 +2945,7 @@ static int __init d40_dmaengine_init(struct d40_base *base,
}
d40_chan_init(base, &base->dma_memcpy, base->log_chans,
- base->num_log_chans, base->plat_data->memcpy_len);
+ base->num_log_chans, base->num_memcpy_chans);
dma_cap_zero(base->dma_memcpy.cap_mask);
dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask);
@@ -3123,13 +3139,14 @@ static int __init d40_phy_res_init(struct d40_base *base)
static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
{
- struct stedma40_platform_data *plat_data;
+ struct stedma40_platform_data *plat_data = pdev->dev.platform_data;
struct clk *clk = NULL;
void __iomem *virtbase = NULL;
struct resource *res = NULL;
struct d40_base *base = NULL;
int num_log_chans = 0;
int num_phy_chans;
+ int num_memcpy_chans;
int clk_ret = -EINVAL;
int i;
u32 pid;
@@ -3189,8 +3206,10 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
* DB8540v1 has revision 4
*/
rev = AMBA_REV_BITS(pid);
-
- plat_data = pdev->dev.platform_data;
+ if (rev < 2) {
+ d40_err(&pdev->dev, "hardware revision: %d is not supported", rev);
+ goto failure;
+ }
/* The number of physical channels on this HW */
if (plat_data->num_of_phy_chans)
@@ -3198,26 +3217,20 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
else
num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4;
- dev_info(&pdev->dev, "hardware revision: %d @ 0x%x with %d physical channels\n",
- rev, res->start, num_phy_chans);
-
- if (rev < 2) {
- d40_err(&pdev->dev, "hardware revision: %d is not supported",
- rev);
- goto failure;
- }
+ /* The number of channels used for memcpy */
+ if (plat_data->num_of_memcpy_chans)
+ num_memcpy_chans = plat_data->num_of_memcpy_chans;
+ else
+ num_memcpy_chans = ARRAY_SIZE(dma40_memcpy_channels);
- /* Count the number of logical channels in use */
- for (i = 0; i < plat_data->dev_len; i++)
- if (plat_data->dev_rx[i] != 0)
- num_log_chans++;
+ num_log_chans = num_phy_chans * D40_MAX_LOG_CHAN_PER_PHY;
- for (i = 0; i < plat_data->dev_len; i++)
- if (plat_data->dev_tx[i] != 0)
- num_log_chans++;
+ dev_info(&pdev->dev,
+ "hardware rev: %d @ 0x%x with %d physical and %d logical channels\n",
+ rev, res->start, num_phy_chans, num_log_chans);
base = kzalloc(ALIGN(sizeof(struct d40_base), 4) +
- (num_phy_chans + num_log_chans + plat_data->memcpy_len) *
+ (num_phy_chans + num_log_chans + num_memcpy_chans) *
sizeof(struct d40_chan), GFP_KERNEL);
if (base == NULL) {
@@ -3227,6 +3240,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
base->rev = rev;
base->clk = clk;
+ base->num_memcpy_chans = num_memcpy_chans;
base->num_phy_chans = num_phy_chans;
base->num_log_chans = num_log_chans;
base->phy_start = res->start;
@@ -3278,17 +3292,11 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
if (!base->lookup_phy_chans)
goto failure;
- if (num_log_chans + plat_data->memcpy_len) {
- /*
- * The max number of logical channels are event lines for all
- * src devices and dst devices
- */
- base->lookup_log_chans = kzalloc(plat_data->dev_len * 2 *
- sizeof(struct d40_chan *),
- GFP_KERNEL);
- if (!base->lookup_log_chans)
- goto failure;
- }
+ base->lookup_log_chans = kzalloc(num_log_chans *
+ sizeof(struct d40_chan *),
+ GFP_KERNEL);
+ if (!base->lookup_log_chans)
+ goto failure;
base->reg_val_backup_chan = kmalloc(base->num_phy_chans *
sizeof(d40_backup_regs_chan),
@@ -3472,17 +3480,82 @@ failure:
return ret;
}
+static int __init d40_of_probe(struct platform_device *pdev,
+ struct device_node *np)
+{
+ struct stedma40_platform_data *pdata;
+ int num_phy = 0, num_memcpy = 0, num_disabled = 0;
+ const const __be32 *list;
+
+ pdata = devm_kzalloc(&pdev->dev,
+ sizeof(struct stedma40_platform_data),
+ GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ /* If absent this value will be obtained from h/w. */
+ of_property_read_u32(np, "dma-channels", &num_phy);
+ if (num_phy > 0)
+ pdata->num_of_phy_chans = num_phy;
+
+ list = of_get_property(np, "memcpy-channels", &num_memcpy);
+ num_memcpy /= sizeof(*list);
+
+ if (num_memcpy > D40_MEMCPY_MAX_CHANS || num_memcpy <= 0) {
+ d40_err(&pdev->dev,
+ "Invalid number of memcpy channels specified (%d)\n",
+ num_memcpy);
+ return -EINVAL;
+ }
+ pdata->num_of_memcpy_chans = num_memcpy;
+
+ of_property_read_u32_array(np, "memcpy-channels",
+ dma40_memcpy_channels,
+ num_memcpy);
+
+ list = of_get_property(np, "disabled-channels", &num_disabled);
+ num_disabled /= sizeof(*list);
+
+ if (num_disabled > STEDMA40_MAX_PHYS || num_disabled < 0) {
+ d40_err(&pdev->dev,
+ "Invalid number of disabled channels specified (%d)\n",
+ num_disabled);
+ return -EINVAL;
+ }
+
+ of_property_read_u32_array(np, "disabled-channels",
+ pdata->disabled_channels,
+ num_disabled);
+ pdata->disabled_channels[num_disabled] = -1;
+
+ pdev->dev.platform_data = pdata;
+
+ return 0;
+}
+
static int __init d40_probe(struct platform_device *pdev)
{
- int err;
+ struct stedma40_platform_data *plat_data = pdev->dev.platform_data;
+ struct device_node *np = pdev->dev.of_node;
int ret = -ENOENT;
- struct d40_base *base;
+ struct d40_base *base = NULL;
struct resource *res = NULL;
int num_reserved_chans;
u32 val;
- base = d40_hw_detect_init(pdev);
+ if (!plat_data) {
+ if (np) {
+ if(d40_of_probe(pdev, np)) {
+ ret = -ENOMEM;
+ goto failure;
+ }
+ } else {
+ d40_err(&pdev->dev, "No pdata or Device Tree provided\n");
+ goto failure;
+ }
+ }
+ base = d40_hw_detect_init(pdev);
if (!base)
goto failure;
@@ -3575,6 +3648,7 @@ static int __init d40_probe(struct platform_device *pdev)
base->lcpa_regulator = regulator_get(base->dev, "lcla_esram");
if (IS_ERR(base->lcpa_regulator)) {
d40_err(&pdev->dev, "Failed to get lcpa_regulator\n");
+ ret = PTR_ERR(base->lcpa_regulator);
base->lcpa_regulator = NULL;
goto failure;
}
@@ -3590,19 +3664,26 @@ static int __init d40_probe(struct platform_device *pdev)
}
base->initialized = true;
- err = d40_dmaengine_init(base, num_reserved_chans);
- if (err)
+ ret = d40_dmaengine_init(base, num_reserved_chans);
+ if (ret)
goto failure;
base->dev->dma_parms = &base->dma_parms;
- err = dma_set_max_seg_size(base->dev, STEDMA40_MAX_SEG_SIZE);
- if (err) {
+ ret = dma_set_max_seg_size(base->dev, STEDMA40_MAX_SEG_SIZE);
+ if (ret) {
d40_err(&pdev->dev, "Failed to set dma max seg size\n");
goto failure;
}
d40_hw_init(base);
+ if (np) {
+ ret = of_dma_controller_register(np, d40_xlate, NULL);
+ if (ret)
+ dev_err(&pdev->dev,
+ "could not register of_dma_controller\n");
+ }
+
dev_info(base->dev, "initialized\n");
return 0;
@@ -3656,11 +3737,17 @@ failure:
return ret;
}
+static const struct of_device_id d40_match[] = {
+ { .compatible = "stericsson,dma40", },
+ {}
+};
+
static struct platform_driver d40_driver = {
.driver = {
.owner = THIS_MODULE,
.name = D40_NAME,
.pm = DMA40_PM_OPS,
+ .of_match_table = d40_match,
},
};
diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
index 7180e0d41722..27b818dee7c7 100644
--- a/drivers/dma/ste_dma40_ll.c
+++ b/drivers/dma/ste_dma40_ll.c
@@ -10,6 +10,18 @@
#include "ste_dma40_ll.h"
+u8 d40_width_to_bits(enum dma_slave_buswidth width)
+{
+ if (width == DMA_SLAVE_BUSWIDTH_1_BYTE)
+ return STEDMA40_ESIZE_8_BIT;
+ else if (width == DMA_SLAVE_BUSWIDTH_2_BYTES)
+ return STEDMA40_ESIZE_16_BIT;
+ else if (width == DMA_SLAVE_BUSWIDTH_8_BYTES)
+ return STEDMA40_ESIZE_64_BIT;
+ else
+ return STEDMA40_ESIZE_32_BIT;
+}
+
/* Sets up proper LCSP1 and LCSP3 register for a logical channel */
void d40_log_cfg(struct stedma40_chan_cfg *cfg,
u32 *lcsp1, u32 *lcsp3)
@@ -18,106 +30,100 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg,
u32 l1 = 0; /* src */
/* src is mem? -> increase address pos */
- if (cfg->dir == STEDMA40_MEM_TO_PERIPH ||
- cfg->dir == STEDMA40_MEM_TO_MEM)
- l1 |= 1 << D40_MEM_LCSP1_SCFG_INCR_POS;
+ if (cfg->dir == DMA_MEM_TO_DEV ||
+ cfg->dir == DMA_MEM_TO_MEM)
+ l1 |= BIT(D40_MEM_LCSP1_SCFG_INCR_POS);
/* dst is mem? -> increase address pos */
- if (cfg->dir == STEDMA40_PERIPH_TO_MEM ||
- cfg->dir == STEDMA40_MEM_TO_MEM)
- l3 |= 1 << D40_MEM_LCSP3_DCFG_INCR_POS;
+ if (cfg->dir == DMA_DEV_TO_MEM ||
+ cfg->dir == DMA_MEM_TO_MEM)
+ l3 |= BIT(D40_MEM_LCSP3_DCFG_INCR_POS);
/* src is hw? -> master port 1 */
- if (cfg->dir == STEDMA40_PERIPH_TO_MEM ||
- cfg->dir == STEDMA40_PERIPH_TO_PERIPH)
- l1 |= 1 << D40_MEM_LCSP1_SCFG_MST_POS;
+ if (cfg->dir == DMA_DEV_TO_MEM ||
+ cfg->dir == DMA_DEV_TO_DEV)
+ l1 |= BIT(D40_MEM_LCSP1_SCFG_MST_POS);
/* dst is hw? -> master port 1 */
- if (cfg->dir == STEDMA40_MEM_TO_PERIPH ||
- cfg->dir == STEDMA40_PERIPH_TO_PERIPH)
- l3 |= 1 << D40_MEM_LCSP3_DCFG_MST_POS;
+ if (cfg->dir == DMA_MEM_TO_DEV ||
+ cfg->dir == DMA_DEV_TO_DEV)
+ l3 |= BIT(D40_MEM_LCSP3_DCFG_MST_POS);
- l3 |= 1 << D40_MEM_LCSP3_DCFG_EIM_POS;
+ l3 |= BIT(D40_MEM_LCSP3_DCFG_EIM_POS);
l3 |= cfg->dst_info.psize << D40_MEM_LCSP3_DCFG_PSIZE_POS;
- l3 |= cfg->dst_info.data_width << D40_MEM_LCSP3_DCFG_ESIZE_POS;
+ l3 |= d40_width_to_bits(cfg->dst_info.data_width)
+ << D40_MEM_LCSP3_DCFG_ESIZE_POS;
- l1 |= 1 << D40_MEM_LCSP1_SCFG_EIM_POS;
+ l1 |= BIT(D40_MEM_LCSP1_SCFG_EIM_POS);
l1 |= cfg->src_info.psize << D40_MEM_LCSP1_SCFG_PSIZE_POS;
- l1 |= cfg->src_info.data_width << D40_MEM_LCSP1_SCFG_ESIZE_POS;
+ l1 |= d40_width_to_bits(cfg->src_info.data_width)
+ << D40_MEM_LCSP1_SCFG_ESIZE_POS;
*lcsp1 = l1;
*lcsp3 = l3;
}
-/* Sets up SRC and DST CFG register for both logical and physical channels */
-void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
- u32 *src_cfg, u32 *dst_cfg, bool is_log)
+void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg)
{
u32 src = 0;
u32 dst = 0;
- if (!is_log) {
- /* Physical channel */
- if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) ||
- (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
- /* Set master port to 1 */
- src |= 1 << D40_SREG_CFG_MST_POS;
- src |= D40_TYPE_TO_EVENT(cfg->src_dev_type);
-
- if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
- src |= 1 << D40_SREG_CFG_PHY_TM_POS;
- else
- src |= 3 << D40_SREG_CFG_PHY_TM_POS;
- }
- if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) ||
- (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
- /* Set master port to 1 */
- dst |= 1 << D40_SREG_CFG_MST_POS;
- dst |= D40_TYPE_TO_EVENT(cfg->dst_dev_type);
-
- if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
- dst |= 1 << D40_SREG_CFG_PHY_TM_POS;
- else
- dst |= 3 << D40_SREG_CFG_PHY_TM_POS;
- }
- /* Interrupt on end of transfer for destination */
- dst |= 1 << D40_SREG_CFG_TIM_POS;
-
- /* Generate interrupt on error */
- src |= 1 << D40_SREG_CFG_EIM_POS;
- dst |= 1 << D40_SREG_CFG_EIM_POS;
-
- /* PSIZE */
- if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) {
- src |= 1 << D40_SREG_CFG_PHY_PEN_POS;
- src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS;
- }
- if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) {
- dst |= 1 << D40_SREG_CFG_PHY_PEN_POS;
- dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS;
- }
-
- /* Element size */
- src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS;
- dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS;
-
- /* Set the priority bit to high for the physical channel */
- if (cfg->high_priority) {
- src |= 1 << D40_SREG_CFG_PRI_POS;
- dst |= 1 << D40_SREG_CFG_PRI_POS;
- }
-
- } else {
- /* Logical channel */
- dst |= 1 << D40_SREG_CFG_LOG_GIM_POS;
- src |= 1 << D40_SREG_CFG_LOG_GIM_POS;
+ if ((cfg->dir == DMA_DEV_TO_MEM) ||
+ (cfg->dir == DMA_DEV_TO_DEV)) {
+ /* Set master port to 1 */
+ src |= BIT(D40_SREG_CFG_MST_POS);
+ src |= D40_TYPE_TO_EVENT(cfg->dev_type);
+
+ if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
+ src |= BIT(D40_SREG_CFG_PHY_TM_POS);
+ else
+ src |= 3 << D40_SREG_CFG_PHY_TM_POS;
+ }
+ if ((cfg->dir == DMA_MEM_TO_DEV) ||
+ (cfg->dir == DMA_DEV_TO_DEV)) {
+ /* Set master port to 1 */
+ dst |= BIT(D40_SREG_CFG_MST_POS);
+ dst |= D40_TYPE_TO_EVENT(cfg->dev_type);
+
+ if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
+ dst |= BIT(D40_SREG_CFG_PHY_TM_POS);
+ else
+ dst |= 3 << D40_SREG_CFG_PHY_TM_POS;
+ }
+ /* Interrupt on end of transfer for destination */
+ dst |= BIT(D40_SREG_CFG_TIM_POS);
+
+ /* Generate interrupt on error */
+ src |= BIT(D40_SREG_CFG_EIM_POS);
+ dst |= BIT(D40_SREG_CFG_EIM_POS);
+
+ /* PSIZE */
+ if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) {
+ src |= BIT(D40_SREG_CFG_PHY_PEN_POS);
+ src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS;
+ }
+ if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) {
+ dst |= BIT(D40_SREG_CFG_PHY_PEN_POS);
+ dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS;
+ }
+
+ /* Element size */
+ src |= d40_width_to_bits(cfg->src_info.data_width)
+ << D40_SREG_CFG_ESIZE_POS;
+ dst |= d40_width_to_bits(cfg->dst_info.data_width)
+ << D40_SREG_CFG_ESIZE_POS;
+
+ /* Set the priority bit to high for the physical channel */
+ if (cfg->high_priority) {
+ src |= BIT(D40_SREG_CFG_PRI_POS);
+ dst |= BIT(D40_SREG_CFG_PRI_POS);
}
if (cfg->src_info.big_endian)
- src |= 1 << D40_SREG_CFG_LBE_POS;
+ src |= BIT(D40_SREG_CFG_LBE_POS);
if (cfg->dst_info.big_endian)
- dst |= 1 << D40_SREG_CFG_LBE_POS;
+ dst |= BIT(D40_SREG_CFG_LBE_POS);
*src_cfg = src;
*dst_cfg = dst;
@@ -143,23 +149,22 @@ static int d40_phy_fill_lli(struct d40_phy_lli *lli,
num_elems = 2 << psize;
/* Must be aligned */
- if (!IS_ALIGNED(data, 0x1 << data_width))
+ if (!IS_ALIGNED(data, data_width))
return -EINVAL;
/* Transfer size can't be smaller than (num_elms * elem_size) */
- if (data_size < num_elems * (0x1 << data_width))
+ if (data_size < num_elems * data_width)
return -EINVAL;
/* The number of elements. IE now many chunks */
- lli->reg_elt = (data_size >> data_width) << D40_SREG_ELEM_PHY_ECNT_POS;
+ lli->reg_elt = (data_size / data_width) << D40_SREG_ELEM_PHY_ECNT_POS;
/*
* Distance to next element sized entry.
* Usually the size of the element unless you want gaps.
*/
if (addr_inc)
- lli->reg_elt |= (0x1 << data_width) <<
- D40_SREG_ELEM_PHY_EIDX_POS;
+ lli->reg_elt |= data_width << D40_SREG_ELEM_PHY_EIDX_POS;
/* Where the data is */
lli->reg_ptr = data;
@@ -167,18 +172,20 @@ static int d40_phy_fill_lli(struct d40_phy_lli *lli,
/* If this scatter list entry is the last one, no next link */
if (next_lli == 0)
- lli->reg_lnk = 0x1 << D40_SREG_LNK_PHY_TCP_POS;
+ lli->reg_lnk = BIT(D40_SREG_LNK_PHY_TCP_POS);
else
lli->reg_lnk = next_lli;
/* Set/clear interrupt generation on this link item.*/
if (term_int)
- lli->reg_cfg |= 0x1 << D40_SREG_CFG_TIM_POS;
+ lli->reg_cfg |= BIT(D40_SREG_CFG_TIM_POS);
else
- lli->reg_cfg &= ~(0x1 << D40_SREG_CFG_TIM_POS);
+ lli->reg_cfg &= ~BIT(D40_SREG_CFG_TIM_POS);
- /* Post link */
- lli->reg_lnk |= 0 << D40_SREG_LNK_PHY_PRE_POS;
+ /*
+ * Post link - D40_SREG_LNK_PHY_PRE_POS = 0
+ * Relink happens after transfer completion.
+ */
return 0;
}
@@ -187,16 +194,16 @@ static int d40_seg_size(int size, int data_width1, int data_width2)
{
u32 max_w = max(data_width1, data_width2);
u32 min_w = min(data_width1, data_width2);
- u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE << min_w, 1 << max_w);
+ u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w);
if (seg_max > STEDMA40_MAX_SEG_SIZE)
- seg_max -= (1 << max_w);
+ seg_max -= max_w;
if (size <= seg_max)
return size;
if (size <= 2 * seg_max)
- return ALIGN(size / 2, 1 << max_w);
+ return ALIGN(size / 2, max_w);
return seg_max;
}
@@ -362,10 +369,10 @@ static void d40_log_fill_lli(struct d40_log_lli *lli,
lli->lcsp13 = reg_cfg;
/* The number of elements to transfer */
- lli->lcsp02 = ((data_size >> data_width) <<
+ lli->lcsp02 = ((data_size / data_width) <<
D40_MEM_LCSP0_ECNT_POS) & D40_MEM_LCSP0_ECNT_MASK;
- BUG_ON((data_size >> data_width) > STEDMA40_MAX_SEG_SIZE);
+ BUG_ON((data_size / data_width) > STEDMA40_MAX_SEG_SIZE);
/* 16 LSBs address of the current element */
lli->lcsp02 |= data & D40_MEM_LCSP0_SPTR_MASK;
diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h
index fdde8ef77542..1b47312bc574 100644
--- a/drivers/dma/ste_dma40_ll.h
+++ b/drivers/dma/ste_dma40_ll.h
@@ -432,8 +432,7 @@ enum d40_lli_flags {
void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
u32 *src_cfg,
- u32 *dst_cfg,
- bool is_log);
+ u32 *dst_cfg);
void d40_log_cfg(struct stedma40_chan_cfg *cfg,
u32 *lcsp1,
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index d173d56dbb8c..6ec82f76f019 100644
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -51,6 +51,8 @@ struct gpio_rcar_priv {
#define FILONOFF 0x28
#define BOTHEDGE 0x4c
+#define RCAR_MAX_GPIO_PER_BANK 32
+
static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs)
{
return ioread32(p->base + offs);
@@ -274,9 +276,35 @@ static struct irq_domain_ops gpio_rcar_irq_domain_ops = {
.map = gpio_rcar_irq_domain_map,
};
+static void gpio_rcar_parse_pdata(struct gpio_rcar_priv *p)
+{
+ struct gpio_rcar_config *pdata = p->pdev->dev.platform_data;
+ struct device_node *np = p->pdev->dev.of_node;
+ struct of_phandle_args args;
+ int ret;
+
+ if (pdata) {
+ p->config = *pdata;
+ } else if (IS_ENABLED(CONFIG_OF) && np) {
+ ret = of_parse_phandle_with_args(np, "gpio-ranges",
+ "#gpio-range-cells", 0, &args);
+ p->config.number_of_pins = ret == 0 && args.args_count == 3
+ ? args.args[2]
+ : RCAR_MAX_GPIO_PER_BANK;
+ p->config.gpio_base = -1;
+ }
+
+ if (p->config.number_of_pins == 0 ||
+ p->config.number_of_pins > RCAR_MAX_GPIO_PER_BANK) {
+ dev_warn(&p->pdev->dev,
+ "Invalid number of gpio lines %u, using %u\n",
+ p->config.number_of_pins, RCAR_MAX_GPIO_PER_BANK);
+ p->config.number_of_pins = RCAR_MAX_GPIO_PER_BANK;
+ }
+}
+
static int gpio_rcar_probe(struct platform_device *pdev)
{
- struct gpio_rcar_config *pdata = pdev->dev.platform_data;
struct gpio_rcar_priv *p;
struct resource *io, *irq;
struct gpio_chip *gpio_chip;
@@ -291,14 +319,14 @@ static int gpio_rcar_probe(struct platform_device *pdev)
goto err0;
}
- /* deal with driver instance configuration */
- if (pdata)
- p->config = *pdata;
-
p->pdev = pdev;
- platform_set_drvdata(pdev, p);
spin_lock_init(&p->lock);
+ /* Get device configuration from DT node or platform data. */
+ gpio_rcar_parse_pdata(p);
+
+ platform_set_drvdata(pdev, p);
+
io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
@@ -325,6 +353,7 @@ static int gpio_rcar_probe(struct platform_device *pdev)
gpio_chip->set = gpio_rcar_set;
gpio_chip->to_irq = gpio_rcar_to_irq;
gpio_chip->label = name;
+ gpio_chip->dev = &pdev->dev;
gpio_chip->owner = THIS_MODULE;
gpio_chip->base = p->config.gpio_base;
gpio_chip->ngpio = p->config.number_of_pins;
@@ -371,10 +400,12 @@ static int gpio_rcar_probe(struct platform_device *pdev)
p->config.irq_base, ret);
}
- ret = gpiochip_add_pin_range(gpio_chip, p->config.pctl_name, 0,
- gpio_chip->base, gpio_chip->ngpio);
- if (ret < 0)
- dev_warn(&pdev->dev, "failed to add pin range\n");
+ if (p->config.pctl_name) {
+ ret = gpiochip_add_pin_range(gpio_chip, p->config.pctl_name, 0,
+ gpio_chip->base, gpio_chip->ngpio);
+ if (ret < 0)
+ dev_warn(&pdev->dev, "failed to add pin range\n");
+ }
return 0;
@@ -397,11 +428,23 @@ static int gpio_rcar_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id gpio_rcar_of_table[] = {
+ {
+ .compatible = "renesas,gpio-rcar",
+ },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, gpio_rcar_of_table);
+#endif
+
static struct platform_driver gpio_rcar_device_driver = {
.probe = gpio_rcar_probe,
.remove = gpio_rcar_remove,
.driver = {
.name = "gpio_rcar",
+ .of_match_table = of_match_ptr(gpio_rcar_of_table),
}
};
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index b22ca7933745..a1392f47bbda 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -933,67 +933,6 @@ static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
s3c_gpiolib_track(chip);
}
-#if defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF)
-static int s3c24xx_gpio_xlate(struct gpio_chip *gc,
- const struct of_phandle_args *gpiospec, u32 *flags)
-{
- unsigned int pin;
-
- if (WARN_ON(gc->of_gpio_n_cells < 3))
- return -EINVAL;
-
- if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
- return -EINVAL;
-
- if (gpiospec->args[0] > gc->ngpio)
- return -EINVAL;
-
- pin = gc->base + gpiospec->args[0];
-
- if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1])))
- pr_warn("gpio_xlate: failed to set pin function\n");
- if (s3c_gpio_setpull(pin, gpiospec->args[2] & 0xffff))
- pr_warn("gpio_xlate: failed to set pin pull up/down\n");
-
- if (flags)
- *flags = gpiospec->args[2] >> 16;
-
- return gpiospec->args[0];
-}
-
-static const struct of_device_id s3c24xx_gpio_dt_match[] __initdata = {
- { .compatible = "samsung,s3c24xx-gpio", },
- {}
-};
-
-static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
- u64 base, u64 offset)
-{
- struct gpio_chip *gc = &chip->chip;
- u64 address;
-
- if (!of_have_populated_dt())
- return;
-
- address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset;
- gc->of_node = of_find_matching_node_by_address(NULL,
- s3c24xx_gpio_dt_match, address);
- if (!gc->of_node) {
- pr_info("gpio: device tree node not found for gpio controller"
- " with base address %08llx\n", address);
- return;
- }
- gc->of_gpio_n_cells = 3;
- gc->of_xlate = s3c24xx_gpio_xlate;
-}
-#else
-static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
- u64 base, u64 offset)
-{
- return;
-}
-#endif /* defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF) */
-
static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
int nr_chips, void __iomem *base)
{
@@ -1018,8 +957,6 @@ static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
gc->direction_output = samsung_gpiolib_2bit_output;
samsung_gpiolib_add(chip);
-
- s3c24xx_gpiolib_attach_ofnode(chip, S3C24XX_PA_GPIO, i * 0x10);
}
}
@@ -3026,6 +2963,10 @@ static __init int samsung_gpiolib_init(void)
*/
struct device_node *pctrl_np;
static const struct of_device_id exynos_pinctrl_ids[] = {
+ { .compatible = "samsung,s3c2412-pinctrl", },
+ { .compatible = "samsung,s3c2416-pinctrl", },
+ { .compatible = "samsung,s3c2440-pinctrl", },
+ { .compatible = "samsung,s3c2450-pinctrl", },
{ .compatible = "samsung,exynos4210-pinctrl", },
{ .compatible = "samsung,exynos4x12-pinctrl", },
{ .compatible = "samsung,exynos5250-pinctrl", },
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index 9545c9f03809..c8b5c13bcd05 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -16,4 +16,38 @@ config PL320_MBOX
Management Engine, primarily for cpufreq. Say Y here if you want
to use the PL320 IPCM support.
+config OMAP_MBOX
+ tristate
+ help
+ This option is selected by any OMAP architecture specific mailbox
+ driver such as CONFIG_OMAP1_MBOX or CONFIG_OMAP2PLUS_MBOX. This
+ enables the common OMAP mailbox framework code.
+
+config OMAP1_MBOX
+ tristate "OMAP1 Mailbox framework support"
+ depends on ARCH_OMAP1
+ select OMAP_MBOX
+ help
+ Mailbox implementation for OMAP chips with hardware for
+ interprocessor communication involving DSP in OMAP1. Say Y here
+ if you want to use OMAP1 Mailbox framework support.
+
+config OMAP2PLUS_MBOX
+ tristate "OMAP2+ Mailbox framework support"
+ depends on ARCH_OMAP2PLUS
+ select OMAP_MBOX
+ help
+ Mailbox implementation for OMAP family chips with hardware for
+ interprocessor communication involving DSP, IVA1.0 and IVA2 in
+ OMAP2/3; or IPU, IVA HD and DSP in OMAP4/5. Say Y here if you
+ want to use OMAP2+ Mailbox framework support.
+
+config OMAP_MBOX_KFIFO_SIZE
+ int "Mailbox kfifo default buffer size (bytes)"
+ depends on OMAP2PLUS_MBOX || OMAP1_MBOX
+ default 256
+ help
+ Specify the default size of mailbox's kfifo buffers (bytes).
+ This can also be changed at runtime (via the mbox_kfifo_size
+ module parameter).
endif
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index 543ad6a79505..e0facb34084a 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -1 +1,7 @@
obj-$(CONFIG_PL320_MBOX) += pl320-ipc.o
+
+obj-$(CONFIG_OMAP_MBOX) += omap-mailbox.o
+obj-$(CONFIG_OMAP1_MBOX) += mailbox_omap1.o
+mailbox_omap1-objs := mailbox-omap1.o
+obj-$(CONFIG_OMAP2PLUS_MBOX) += mailbox_omap2.o
+mailbox_omap2-objs := mailbox-omap2.o
diff --git a/arch/arm/mach-omap1/mailbox.c b/drivers/mailbox/mailbox-omap1.c
index efc8f207f6fc..9001b7633f10 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/drivers/mailbox/mailbox-omap1.c
@@ -13,7 +13,8 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <plat/mailbox.h>
+
+#include "omap-mbox.h"
#define MAILBOX_ARM2DSP1 0x00
#define MAILBOX_ARM2DSP1b 0x04
@@ -86,21 +87,21 @@ static int omap1_mbox_fifo_full(struct omap_mbox *mbox)
/* irq */
static void
-omap1_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq)
+omap1_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
{
if (irq == IRQ_RX)
enable_irq(mbox->irq);
}
static void
-omap1_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq)
+omap1_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
{
if (irq == IRQ_RX)
disable_irq(mbox->irq);
}
static int
-omap1_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_type_t irq)
+omap1_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
{
if (irq == IRQ_TX)
return 0;
@@ -152,6 +153,9 @@ static int omap1_mbox_probe(struct platform_device *pdev)
list[0]->irq = platform_get_irq_byname(pdev, "dsp");
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem)
+ return -ENOENT;
+
mbox_base = ioremap(mem->start, resource_size(mem));
if (!mbox_base)
return -ENOMEM;
diff --git a/arch/arm/mach-omap2/mailbox.c b/drivers/mailbox/mailbox-omap2.c
index 0b080267b7f6..eba380d7b17f 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/drivers/mailbox/mailbox-omap2.c
@@ -11,15 +11,15 @@
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
+#include <linux/platform_data/mailbox-omap.h>
-#include <plat/mailbox.h>
-
-#include "soc.h"
+#include "omap-mbox.h"
#define MAILBOX_REVISION 0x000
#define MAILBOX_MESSAGE(m) (0x040 + 4 * (m))
@@ -59,11 +59,9 @@ struct omap_mbox2_priv {
u32 notfull_bit;
u32 ctx[OMAP4_MBOX_NR_REGS];
unsigned long irqdisable;
+ u32 intr_type;
};
-static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
- omap_mbox_type_t irq);
-
static inline unsigned int mbox_read_reg(size_t ofs)
{
return __raw_readl(mbox_base + ofs);
@@ -124,8 +122,7 @@ static int omap2_mbox_fifo_full(struct omap_mbox *mbox)
}
/* Mailbox IRQ handle functions */
-static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
- omap_mbox_type_t irq)
+static void omap2_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
{
struct omap_mbox2_priv *p = mbox->priv;
u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
@@ -135,20 +132,22 @@ static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
mbox_write_reg(l, p->irqenable);
}
-static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
- omap_mbox_type_t irq)
+static void omap2_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
{
struct omap_mbox2_priv *p = mbox->priv;
u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
- if (!cpu_is_omap44xx())
+ /*
+ * Read and update the interrupt configuration register for pre-OMAP4.
+ * OMAP4 and later SoCs have a dedicated interrupt disabling register.
+ */
+ if (!p->intr_type)
bit = mbox_read_reg(p->irqdisable) & ~bit;
mbox_write_reg(bit, p->irqdisable);
}
-static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
- omap_mbox_type_t irq)
+static void omap2_mbox_ack_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
{
struct omap_mbox2_priv *p = mbox->priv;
u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
@@ -159,8 +158,7 @@ static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
mbox_read_reg(p->irqstatus);
}
-static int omap2_mbox_is_irq(struct omap_mbox *mbox,
- omap_mbox_type_t irq)
+static int omap2_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
{
struct omap_mbox2_priv *p = mbox->priv;
u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
@@ -175,7 +173,8 @@ static void omap2_mbox_save_ctx(struct omap_mbox *mbox)
int i;
struct omap_mbox2_priv *p = mbox->priv;
int nr_regs;
- if (cpu_is_omap44xx())
+
+ if (p->intr_type)
nr_regs = OMAP4_MBOX_NR_REGS;
else
nr_regs = MBOX_NR_REGS;
@@ -192,7 +191,8 @@ static void omap2_mbox_restore_ctx(struct omap_mbox *mbox)
int i;
struct omap_mbox2_priv *p = mbox->priv;
int nr_regs;
- if (cpu_is_omap44xx())
+
+ if (p->intr_type)
nr_regs = OMAP4_MBOX_NR_REGS;
else
nr_regs = MBOX_NR_REGS;
@@ -220,192 +220,120 @@ static struct omap_mbox_ops omap2_mbox_ops = {
.restore_ctx = omap2_mbox_restore_ctx,
};
-/*
- * MAILBOX 0: ARM -> DSP,
- * MAILBOX 1: ARM <- DSP.
- * MAILBOX 2: ARM -> IVA,
- * MAILBOX 3: ARM <- IVA.
- */
-
-/* FIXME: the following structs should be filled automatically by the user id */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP2)
-/* DSP */
-static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
- .tx_fifo = {
- .msg = MAILBOX_MESSAGE(0),
- .fifo_stat = MAILBOX_FIFOSTATUS(0),
- },
- .rx_fifo = {
- .msg = MAILBOX_MESSAGE(1),
- .msg_stat = MAILBOX_MSGSTATUS(1),
- },
- .irqenable = MAILBOX_IRQENABLE(0),
- .irqstatus = MAILBOX_IRQSTATUS(0),
- .notfull_bit = MAILBOX_IRQ_NOTFULL(0),
- .newmsg_bit = MAILBOX_IRQ_NEWMSG(1),
- .irqdisable = MAILBOX_IRQENABLE(0),
-};
-
-struct omap_mbox mbox_dsp_info = {
- .name = "dsp",
- .ops = &omap2_mbox_ops,
- .priv = &omap2_mbox_dsp_priv,
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3)
-struct omap_mbox *omap3_mboxes[] = { &mbox_dsp_info, NULL };
-#endif
-
-#if defined(CONFIG_SOC_OMAP2420)
-/* IVA */
-static struct omap_mbox2_priv omap2_mbox_iva_priv = {
- .tx_fifo = {
- .msg = MAILBOX_MESSAGE(2),
- .fifo_stat = MAILBOX_FIFOSTATUS(2),
- },
- .rx_fifo = {
- .msg = MAILBOX_MESSAGE(3),
- .msg_stat = MAILBOX_MSGSTATUS(3),
- },
- .irqenable = MAILBOX_IRQENABLE(3),
- .irqstatus = MAILBOX_IRQSTATUS(3),
- .notfull_bit = MAILBOX_IRQ_NOTFULL(2),
- .newmsg_bit = MAILBOX_IRQ_NEWMSG(3),
- .irqdisable = MAILBOX_IRQENABLE(3),
-};
-
-static struct omap_mbox mbox_iva_info = {
- .name = "iva",
- .ops = &omap2_mbox_ops,
- .priv = &omap2_mbox_iva_priv,
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2
-struct omap_mbox *omap2_mboxes[] = {
- &mbox_dsp_info,
-#ifdef CONFIG_SOC_OMAP2420
- &mbox_iva_info,
-#endif
- NULL
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP4)
-/* OMAP4 */
-static struct omap_mbox2_priv omap2_mbox_1_priv = {
- .tx_fifo = {
- .msg = MAILBOX_MESSAGE(0),
- .fifo_stat = MAILBOX_FIFOSTATUS(0),
- },
- .rx_fifo = {
- .msg = MAILBOX_MESSAGE(1),
- .msg_stat = MAILBOX_MSGSTATUS(1),
- },
- .irqenable = OMAP4_MAILBOX_IRQENABLE(0),
- .irqstatus = OMAP4_MAILBOX_IRQSTATUS(0),
- .notfull_bit = MAILBOX_IRQ_NOTFULL(0),
- .newmsg_bit = MAILBOX_IRQ_NEWMSG(1),
- .irqdisable = OMAP4_MAILBOX_IRQENABLE_CLR(0),
-};
-
-struct omap_mbox mbox_1_info = {
- .name = "mailbox-1",
- .ops = &omap2_mbox_ops,
- .priv = &omap2_mbox_1_priv,
-};
-
-static struct omap_mbox2_priv omap2_mbox_2_priv = {
- .tx_fifo = {
- .msg = MAILBOX_MESSAGE(3),
- .fifo_stat = MAILBOX_FIFOSTATUS(3),
- },
- .rx_fifo = {
- .msg = MAILBOX_MESSAGE(2),
- .msg_stat = MAILBOX_MSGSTATUS(2),
- },
- .irqenable = OMAP4_MAILBOX_IRQENABLE(0),
- .irqstatus = OMAP4_MAILBOX_IRQSTATUS(0),
- .notfull_bit = MAILBOX_IRQ_NOTFULL(3),
- .newmsg_bit = MAILBOX_IRQ_NEWMSG(2),
- .irqdisable = OMAP4_MAILBOX_IRQENABLE_CLR(0),
-};
-
-struct omap_mbox mbox_2_info = {
- .name = "mailbox-2",
- .ops = &omap2_mbox_ops,
- .priv = &omap2_mbox_2_priv,
-};
-
-struct omap_mbox *omap4_mboxes[] = { &mbox_1_info, &mbox_2_info, NULL };
-#endif
-
static int omap2_mbox_probe(struct platform_device *pdev)
{
struct resource *mem;
int ret;
- struct omap_mbox **list;
-
- if (false)
- ;
-#if defined(CONFIG_ARCH_OMAP3)
- else if (cpu_is_omap34xx()) {
- list = omap3_mboxes;
+ struct omap_mbox **list, *mbox, *mboxblk;
+ struct omap_mbox2_priv *priv, *privblk;
+ struct omap_mbox_pdata *pdata = pdev->dev.platform_data;
+ struct omap_mbox_dev_info *info;
+ int i;
- list[0]->irq = platform_get_irq(pdev, 0);
+ if (!pdata || !pdata->info_cnt || !pdata->info) {
+ pr_err("%s: platform not supported\n", __func__);
+ return -ENODEV;
}
-#endif
-#if defined(CONFIG_ARCH_OMAP2)
- else if (cpu_is_omap2430()) {
- list = omap2_mboxes;
- list[0]->irq = platform_get_irq(pdev, 0);
- } else if (cpu_is_omap2420()) {
- list = omap2_mboxes;
+ /* allocate one extra for marking end of list */
+ list = kzalloc((pdata->info_cnt + 1) * sizeof(*list), GFP_KERNEL);
+ if (!list)
+ return -ENOMEM;
- list[0]->irq = platform_get_irq_byname(pdev, "dsp");
- list[1]->irq = platform_get_irq_byname(pdev, "iva");
+ mboxblk = mbox = kzalloc(pdata->info_cnt * sizeof(*mbox), GFP_KERNEL);
+ if (!mboxblk) {
+ ret = -ENOMEM;
+ goto free_list;
}
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
- else if (cpu_is_omap44xx()) {
- list = omap4_mboxes;
- list[0]->irq = list[1]->irq = platform_get_irq(pdev, 0);
+ privblk = priv = kzalloc(pdata->info_cnt * sizeof(*priv), GFP_KERNEL);
+ if (!privblk) {
+ ret = -ENOMEM;
+ goto free_mboxblk;
}
-#endif
- else {
- pr_err("%s: platform not supported\n", __func__);
- return -ENODEV;
+
+ info = pdata->info;
+ for (i = 0; i < pdata->info_cnt; i++, info++, priv++) {
+ priv->tx_fifo.msg = MAILBOX_MESSAGE(info->tx_id);
+ priv->tx_fifo.fifo_stat = MAILBOX_FIFOSTATUS(info->tx_id);
+ priv->rx_fifo.msg = MAILBOX_MESSAGE(info->rx_id);
+ priv->rx_fifo.msg_stat = MAILBOX_MSGSTATUS(info->rx_id);
+ priv->notfull_bit = MAILBOX_IRQ_NOTFULL(info->tx_id);
+ priv->newmsg_bit = MAILBOX_IRQ_NEWMSG(info->rx_id);
+ if (pdata->intr_type) {
+ priv->irqenable = OMAP4_MAILBOX_IRQENABLE(info->usr_id);
+ priv->irqstatus = OMAP4_MAILBOX_IRQSTATUS(info->usr_id);
+ priv->irqdisable =
+ OMAP4_MAILBOX_IRQENABLE_CLR(info->usr_id);
+ } else {
+ priv->irqenable = MAILBOX_IRQENABLE(info->usr_id);
+ priv->irqstatus = MAILBOX_IRQSTATUS(info->usr_id);
+ priv->irqdisable = MAILBOX_IRQENABLE(info->usr_id);
+ }
+ priv->intr_type = pdata->intr_type;
+
+ mbox->priv = priv;
+ mbox->name = info->name;
+ mbox->ops = &omap2_mbox_ops;
+ mbox->irq = platform_get_irq(pdev, info->irq_id);
+ if (mbox->irq < 0) {
+ ret = mbox->irq;
+ goto free_privblk;
+ }
+ list[i] = mbox++;
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ ret = -ENOENT;
+ goto free_privblk;
+ }
+
mbox_base = ioremap(mem->start, resource_size(mem));
- if (!mbox_base)
- return -ENOMEM;
+ if (!mbox_base) {
+ ret = -ENOMEM;
+ goto free_privblk;
+ }
ret = omap_mbox_register(&pdev->dev, list);
- if (ret) {
- iounmap(mbox_base);
- return ret;
- }
+ if (ret)
+ goto unmap_mbox;
+ platform_set_drvdata(pdev, list);
return 0;
+
+unmap_mbox:
+ iounmap(mbox_base);
+free_privblk:
+ kfree(privblk);
+free_mboxblk:
+ kfree(mboxblk);
+free_list:
+ kfree(list);
+ return ret;
}
static int omap2_mbox_remove(struct platform_device *pdev)
{
+ struct omap_mbox2_priv *privblk;
+ struct omap_mbox **list = platform_get_drvdata(pdev);
+ struct omap_mbox *mboxblk = list[0];
+
+ privblk = mboxblk->priv;
omap_mbox_unregister();
iounmap(mbox_base);
+ kfree(privblk);
+ kfree(mboxblk);
+ kfree(list);
+ platform_set_drvdata(pdev, NULL);
+
return 0;
}
static struct platform_driver omap2_mbox_driver = {
- .probe = omap2_mbox_probe,
- .remove = omap2_mbox_remove,
- .driver = {
+ .probe = omap2_mbox_probe,
+ .remove = omap2_mbox_remove,
+ .driver = {
.name = "omap-mailbox",
},
};
diff --git a/arch/arm/plat-omap/mailbox.c b/drivers/mailbox/omap-mailbox.c
index 42377ef9ea3d..d79a646b9042 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/drivers/mailbox/omap-mailbox.c
@@ -31,7 +31,7 @@
#include <linux/notifier.h>
#include <linux/module.h>
-#include <plat/mailbox.h>
+#include "omap-mbox.h"
static struct omap_mbox **mboxes;
@@ -116,6 +116,40 @@ out:
}
EXPORT_SYMBOL(omap_mbox_msg_send);
+void omap_mbox_save_ctx(struct omap_mbox *mbox)
+{
+ if (!mbox->ops->save_ctx) {
+ dev_err(mbox->dev, "%s:\tno save\n", __func__);
+ return;
+ }
+
+ mbox->ops->save_ctx(mbox);
+}
+EXPORT_SYMBOL(omap_mbox_save_ctx);
+
+void omap_mbox_restore_ctx(struct omap_mbox *mbox)
+{
+ if (!mbox->ops->restore_ctx) {
+ dev_err(mbox->dev, "%s:\tno restore\n", __func__);
+ return;
+ }
+
+ mbox->ops->restore_ctx(mbox);
+}
+EXPORT_SYMBOL(omap_mbox_restore_ctx);
+
+void omap_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+ mbox->ops->enable_irq(mbox, irq);
+}
+EXPORT_SYMBOL(omap_mbox_enable_irq);
+
+void omap_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+ mbox->ops->disable_irq(mbox, irq);
+}
+EXPORT_SYMBOL(omap_mbox_disable_irq);
+
static void mbox_tx_tasklet(unsigned long tx_data)
{
struct omap_mbox *mbox = (struct omap_mbox *)tx_data;
@@ -261,13 +295,6 @@ static int omap_mbox_startup(struct omap_mbox *mbox)
}
if (!mbox->use_count++) {
- ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED,
- mbox->name, mbox);
- if (unlikely(ret)) {
- pr_err("failed to register mailbox interrupt:%d\n",
- ret);
- goto fail_request_irq;
- }
mq = mbox_queue_alloc(mbox, NULL, mbox_tx_tasklet);
if (!mq) {
ret = -ENOMEM;
@@ -282,17 +309,24 @@ static int omap_mbox_startup(struct omap_mbox *mbox)
}
mbox->rxq = mq;
mq->mbox = mbox;
+ ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED,
+ mbox->name, mbox);
+ if (unlikely(ret)) {
+ pr_err("failed to register mailbox interrupt:%d\n",
+ ret);
+ goto fail_request_irq;
+ }
omap_mbox_enable_irq(mbox, IRQ_RX);
}
mutex_unlock(&mbox_configured_lock);
return 0;
+fail_request_irq:
+ mbox_queue_free(mbox->rxq);
fail_alloc_rxq:
mbox_queue_free(mbox->txq);
fail_alloc_txq:
- free_irq(mbox->irq, mbox);
-fail_request_irq:
if (mbox->ops->shutdown)
mbox->ops->shutdown(mbox);
mbox->use_count--;
diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/drivers/mailbox/omap-mbox.h
index cc3921e9059c..6cd38fc68599 100644
--- a/arch/arm/plat-omap/include/plat/mailbox.h
+++ b/drivers/mailbox/omap-mbox.h
@@ -1,20 +1,20 @@
-/* mailbox.h */
+/*
+ * omap-mbox.h: OMAP mailbox internal definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
-#ifndef MAILBOX_H
-#define MAILBOX_H
+#ifndef OMAP_MBOX_H
+#define OMAP_MBOX_H
-#include <linux/spinlock.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
#include <linux/device.h>
+#include <linux/interrupt.h>
#include <linux/kfifo.h>
-
-typedef u32 mbox_msg_t;
-struct omap_mbox;
-
-typedef int __bitwise omap_mbox_irq_t;
-#define IRQ_TX ((__force omap_mbox_irq_t) 1)
-#define IRQ_RX ((__force omap_mbox_irq_t) 2)
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/omap-mailbox.h>
typedef int __bitwise omap_mbox_type_t;
#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1)
@@ -51,55 +51,17 @@ struct omap_mbox_queue {
};
struct omap_mbox {
- char *name;
+ const char *name;
unsigned int irq;
struct omap_mbox_queue *txq, *rxq;
struct omap_mbox_ops *ops;
struct device *dev;
void *priv;
int use_count;
- struct blocking_notifier_head notifier;
+ struct blocking_notifier_head notifier;
};
-int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
-void omap_mbox_init_seq(struct omap_mbox *);
-
-struct omap_mbox *omap_mbox_get(const char *, struct notifier_block *nb);
-void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb);
-
int omap_mbox_register(struct device *parent, struct omap_mbox **);
int omap_mbox_unregister(void);
-static inline void omap_mbox_save_ctx(struct omap_mbox *mbox)
-{
- if (!mbox->ops->save_ctx) {
- dev_err(mbox->dev, "%s:\tno save\n", __func__);
- return;
- }
-
- mbox->ops->save_ctx(mbox);
-}
-
-static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox)
-{
- if (!mbox->ops->restore_ctx) {
- dev_err(mbox->dev, "%s:\tno restore\n", __func__);
- return;
- }
-
- mbox->ops->restore_ctx(mbox);
-}
-
-static inline void omap_mbox_enable_irq(struct omap_mbox *mbox,
- omap_mbox_irq_t irq)
-{
- mbox->ops->enable_irq(mbox, irq);
-}
-
-static inline void omap_mbox_disable_irq(struct omap_mbox *mbox,
- omap_mbox_irq_t irq)
-{
- mbox->ops->disable_irq(mbox, irq);
-}
-
-#endif /* MAILBOX_H */
+#endif /* OMAP_MBOX_H */
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index a1c6dd32e14b..901a388dbea7 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -217,6 +217,11 @@ config PINCTRL_EXYNOS5440
select PINMUX
select PINCONF
+config PINCTRL_S3C24XX
+ bool "Samsung S3C24XX SoC pinctrl driver"
+ depends on ARCH_S3C24XX
+ select PINCTRL_SAMSUNG
+
config PINCTRL_S3C64XX
bool "Samsung S3C64XX SoC pinctrl driver"
depends on ARCH_S3C64XX
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 9bdaeb8785ce..f90b645fb601 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o
obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o
obj-$(CONFIG_PINCTRL_EXYNOS) += pinctrl-exynos.o
obj-$(CONFIG_PINCTRL_EXYNOS5440) += pinctrl-exynos5440.o
+obj-$(CONFIG_PINCTRL_S3C24XX) += pinctrl-s3c24xx.o
obj-$(CONFIG_PINCTRL_S3C64XX) += pinctrl-s3c64xx.o
obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o
obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o
diff --git a/drivers/pinctrl/pinctrl-s3c24xx.c b/drivers/pinctrl/pinctrl-s3c24xx.c
new file mode 100644
index 000000000000..24446daaad7d
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-s3c24xx.c
@@ -0,0 +1,651 @@
+/*
+ * S3C24XX specific support for Samsung pinctrl/gpiolib driver.
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This file contains the SamsungS3C24XX specific information required by the
+ * Samsung pinctrl/gpiolib driver. It also includes the implementation of
+ * external gpio and wakeup interrupt support.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include "pinctrl-samsung.h"
+
+#define NUM_EINT 24
+#define NUM_EINT_IRQ 6
+#define EINT_MAX_PER_GROUP 8
+
+#define EINTPEND_REG 0xa8
+#define EINTMASK_REG 0xa4
+
+#define EINT_GROUP(i) ((int)((i) / EINT_MAX_PER_GROUP))
+#define EINT_REG(i) ((EINT_GROUP(i) * 4) + 0x88)
+#define EINT_OFFS(i) ((i) % EINT_MAX_PER_GROUP * 4)
+
+#define EINT_LEVEL_LOW 0
+#define EINT_LEVEL_HIGH 1
+#define EINT_EDGE_FALLING 2
+#define EINT_EDGE_RISING 4
+#define EINT_EDGE_BOTH 6
+#define EINT_MASK 0xf
+
+static struct samsung_pin_bank_type bank_type_1bit = {
+ .fld_width = { 1, 1, },
+ .reg_offset = { 0x00, 0x04, },
+};
+
+static struct samsung_pin_bank_type bank_type_2bit = {
+ .fld_width = { 2, 1, 2, },
+ .reg_offset = { 0x00, 0x04, 0x08, },
+};
+
+#define PIN_BANK_A(pins, reg, id) \
+ { \
+ .type = &bank_type_1bit, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_NONE, \
+ .name = id \
+ }
+
+#define PIN_BANK_2BIT(pins, reg, id) \
+ { \
+ .type = &bank_type_2bit, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_NONE, \
+ .name = id \
+ }
+
+#define PIN_BANK_2BIT_EINTW(pins, reg, id, eoffs, emask)\
+ { \
+ .type = &bank_type_2bit, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_WKUP, \
+ .eint_func = 2, \
+ .eint_mask = emask, \
+ .eint_offset = eoffs, \
+ .name = id \
+ }
+
+/**
+ * struct s3c24xx_eint_data: EINT common data
+ * @drvdata: pin controller driver data
+ * @domains: IRQ domains of particular EINT interrupts
+ * @parents: mapped parent irqs in the main interrupt controller
+ */
+struct s3c24xx_eint_data {
+ struct samsung_pinctrl_drv_data *drvdata;
+ struct irq_domain *domains[NUM_EINT];
+ int parents[NUM_EINT_IRQ];
+};
+
+/**
+ * struct s3c24xx_eint_domain_data: per irq-domain data
+ * @bank: pin bank related to the domain
+ * @eint_data: common data
+ * eint0_3_parent_only: live eints 0-3 only in the main intc
+ */
+struct s3c24xx_eint_domain_data {
+ struct samsung_pin_bank *bank;
+ struct s3c24xx_eint_data *eint_data;
+ bool eint0_3_parent_only;
+};
+
+static int s3c24xx_eint_get_trigger(unsigned int type)
+{
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ return EINT_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ return EINT_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ return EINT_EDGE_BOTH;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ return EINT_LEVEL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ return EINT_LEVEL_LOW;
+ break;
+ default:
+ return -EINVAL;
+ }
+}
+
+static void s3c24xx_eint_set_handler(unsigned int irq, unsigned int type)
+{
+ /* Edge- and level-triggered interrupts need different handlers */
+ if (type & IRQ_TYPE_EDGE_BOTH)
+ __irq_set_handler_locked(irq, handle_edge_irq);
+ else
+ __irq_set_handler_locked(irq, handle_level_irq);
+}
+
+static void s3c24xx_eint_set_function(struct samsung_pinctrl_drv_data *d,
+ struct samsung_pin_bank *bank, int pin)
+{
+ struct samsung_pin_bank_type *bank_type = bank->type;
+ unsigned long flags;
+ void __iomem *reg;
+ u8 shift;
+ u32 mask;
+ u32 val;
+
+ /* Make sure that pin is configured as interrupt */
+ reg = d->virt_base + bank->pctl_offset;
+ shift = pin * bank_type->fld_width[PINCFG_TYPE_FUNC];
+ mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1;
+
+ spin_lock_irqsave(&bank->slock, flags);
+
+ val = readl(reg);
+ val &= ~(mask << shift);
+ val |= bank->eint_func << shift;
+ writel(val, reg);
+
+ spin_unlock_irqrestore(&bank->slock, flags);
+}
+
+static int s3c24xx_eint_type(struct irq_data *data, unsigned int type)
+{
+ struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+ struct samsung_pinctrl_drv_data *d = bank->drvdata;
+ int index = bank->eint_offset + data->hwirq;
+ void __iomem *reg;
+ int trigger;
+ u8 shift;
+ u32 val;
+
+ trigger = s3c24xx_eint_get_trigger(type);
+ if (trigger < 0) {
+ dev_err(d->dev, "unsupported external interrupt type\n");
+ return -EINVAL;
+ }
+
+ s3c24xx_eint_set_handler(data->irq, type);
+
+ /* Set up interrupt trigger */
+ reg = d->virt_base + EINT_REG(index);
+ shift = EINT_OFFS(index);
+
+ val = readl(reg);
+ val &= ~(EINT_MASK << shift);
+ val |= trigger << shift;
+ writel(val, reg);
+
+ s3c24xx_eint_set_function(d, bank, data->hwirq);
+
+ return 0;
+}
+
+/* Handling of EINTs 0-3 on all except S3C2412 and S3C2413 */
+
+static void s3c2410_eint0_3_ack(struct irq_data *data)
+{
+ struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+ struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data;
+ struct s3c24xx_eint_data *eint_data = ddata->eint_data;
+ int parent_irq = eint_data->parents[data->hwirq];
+ struct irq_chip *parent_chip = irq_get_chip(parent_irq);
+
+ parent_chip->irq_ack(irq_get_irq_data(parent_irq));
+}
+
+static void s3c2410_eint0_3_mask(struct irq_data *data)
+{
+ struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+ struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data;
+ struct s3c24xx_eint_data *eint_data = ddata->eint_data;
+ int parent_irq = eint_data->parents[data->hwirq];
+ struct irq_chip *parent_chip = irq_get_chip(parent_irq);
+
+ parent_chip->irq_mask(irq_get_irq_data(parent_irq));
+}
+
+static void s3c2410_eint0_3_unmask(struct irq_data *data)
+{
+ struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+ struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data;
+ struct s3c24xx_eint_data *eint_data = ddata->eint_data;
+ int parent_irq = eint_data->parents[data->hwirq];
+ struct irq_chip *parent_chip = irq_get_chip(parent_irq);
+
+ parent_chip->irq_unmask(irq_get_irq_data(parent_irq));
+}
+
+static struct irq_chip s3c2410_eint0_3_chip = {
+ .name = "s3c2410-eint0_3",
+ .irq_ack = s3c2410_eint0_3_ack,
+ .irq_mask = s3c2410_eint0_3_mask,
+ .irq_unmask = s3c2410_eint0_3_unmask,
+ .irq_set_type = s3c24xx_eint_type,
+};
+
+static void s3c2410_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_data *data = irq_desc_get_irq_data(desc);
+ struct s3c24xx_eint_data *eint_data = irq_get_handler_data(irq);
+ unsigned int virq;
+
+ /* the first 4 eints have a simple 1 to 1 mapping */
+ virq = irq_linear_revmap(eint_data->domains[data->hwirq], data->hwirq);
+ /* Something must be really wrong if an unmapped EINT is unmasked */
+ BUG_ON(!virq);
+
+ generic_handle_irq(virq);
+}
+
+/* Handling of EINTs 0-3 on S3C2412 and S3C2413 */
+
+static void s3c2412_eint0_3_ack(struct irq_data *data)
+{
+ struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+ struct samsung_pinctrl_drv_data *d = bank->drvdata;
+
+ unsigned long bitval = 1UL << data->hwirq;
+ writel(bitval, d->virt_base + EINTPEND_REG);
+}
+
+static void s3c2412_eint0_3_mask(struct irq_data *data)
+{
+ struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+ struct samsung_pinctrl_drv_data *d = bank->drvdata;
+ unsigned long mask;
+
+ mask = readl(d->virt_base + EINTMASK_REG);
+ mask |= (1UL << data->hwirq);
+ writel(mask, d->virt_base + EINTMASK_REG);
+}
+
+static void s3c2412_eint0_3_unmask(struct irq_data *data)
+{
+ struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+ struct samsung_pinctrl_drv_data *d = bank->drvdata;
+ unsigned long mask;
+
+ mask = readl(d->virt_base + EINTMASK_REG);
+ mask &= ~(1UL << data->hwirq);
+ writel(mask, d->virt_base + EINTMASK_REG);
+}
+
+static struct irq_chip s3c2412_eint0_3_chip = {
+ .name = "s3c2412-eint0_3",
+ .irq_ack = s3c2412_eint0_3_ack,
+ .irq_mask = s3c2412_eint0_3_mask,
+ .irq_unmask = s3c2412_eint0_3_unmask,
+ .irq_set_type = s3c24xx_eint_type,
+};
+
+static void s3c2412_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_get_chip(irq);
+ struct irq_data *data = irq_desc_get_irq_data(desc);
+ struct s3c24xx_eint_data *eint_data = irq_get_handler_data(irq);
+ unsigned int virq;
+
+ chained_irq_enter(chip, desc);
+
+ /* the first 4 eints have a simple 1 to 1 mapping */
+ virq = irq_linear_revmap(eint_data->domains[data->hwirq], data->hwirq);
+ /* Something must be really wrong if an unmapped EINT is unmasked */
+ BUG_ON(!virq);
+
+ generic_handle_irq(virq);
+
+ chained_irq_exit(chip, desc);
+}
+
+/* Handling of all other eints */
+
+static void s3c24xx_eint_ack(struct irq_data *data)
+{
+ struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+ struct samsung_pinctrl_drv_data *d = bank->drvdata;
+ unsigned char index = bank->eint_offset + data->hwirq;
+
+ writel(1UL << index, d->virt_base + EINTPEND_REG);
+}
+
+static void s3c24xx_eint_mask(struct irq_data *data)
+{
+ struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+ struct samsung_pinctrl_drv_data *d = bank->drvdata;
+ unsigned char index = bank->eint_offset + data->hwirq;
+ unsigned long mask;
+
+ mask = readl(d->virt_base + EINTMASK_REG);
+ mask |= (1UL << index);
+ writel(mask, d->virt_base + EINTMASK_REG);
+}
+
+static void s3c24xx_eint_unmask(struct irq_data *data)
+{
+ struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
+ struct samsung_pinctrl_drv_data *d = bank->drvdata;
+ unsigned char index = bank->eint_offset + data->hwirq;
+ unsigned long mask;
+
+ mask = readl(d->virt_base + EINTMASK_REG);
+ mask &= ~(1UL << index);
+ writel(mask, d->virt_base + EINTMASK_REG);
+}
+
+static struct irq_chip s3c24xx_eint_chip = {
+ .name = "s3c-eint",
+ .irq_ack = s3c24xx_eint_ack,
+ .irq_mask = s3c24xx_eint_mask,
+ .irq_unmask = s3c24xx_eint_unmask,
+ .irq_set_type = s3c24xx_eint_type,
+};
+
+static inline void s3c24xx_demux_eint(unsigned int irq, struct irq_desc *desc,
+ u32 offset, u32 range)
+{
+ struct irq_chip *chip = irq_get_chip(irq);
+ struct s3c24xx_eint_data *data = irq_get_handler_data(irq);
+ struct samsung_pinctrl_drv_data *d = data->drvdata;
+ unsigned int pend, mask;
+
+ chained_irq_enter(chip, desc);
+
+ pend = readl(d->virt_base + EINTPEND_REG);
+ mask = readl(d->virt_base + EINTMASK_REG);
+
+ pend &= ~mask;
+ pend &= range;
+
+ while (pend) {
+ unsigned int virq;
+
+ irq = __ffs(pend);
+ pend &= ~(1 << irq);
+ virq = irq_linear_revmap(data->domains[irq], irq - offset);
+ /* Something is really wrong if an unmapped EINT is unmasked */
+ BUG_ON(!virq);
+
+ generic_handle_irq(virq);
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static void s3c24xx_demux_eint4_7(unsigned int irq, struct irq_desc *desc)
+{
+ s3c24xx_demux_eint(irq, desc, 0, 0xf0);
+}
+
+static void s3c24xx_demux_eint8_23(unsigned int irq, struct irq_desc *desc)
+{
+ s3c24xx_demux_eint(irq, desc, 8, 0xffff00);
+}
+
+static irq_flow_handler_t s3c2410_eint_handlers[NUM_EINT_IRQ] = {
+ s3c2410_demux_eint0_3,
+ s3c2410_demux_eint0_3,
+ s3c2410_demux_eint0_3,
+ s3c2410_demux_eint0_3,
+ s3c24xx_demux_eint4_7,
+ s3c24xx_demux_eint8_23,
+};
+
+static irq_flow_handler_t s3c2412_eint_handlers[NUM_EINT_IRQ] = {
+ s3c2412_demux_eint0_3,
+ s3c2412_demux_eint0_3,
+ s3c2412_demux_eint0_3,
+ s3c2412_demux_eint0_3,
+ s3c24xx_demux_eint4_7,
+ s3c24xx_demux_eint8_23,
+};
+
+static int s3c24xx_gpf_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct s3c24xx_eint_domain_data *ddata = h->host_data;
+ struct samsung_pin_bank *bank = ddata->bank;
+
+ if (!(bank->eint_mask & (1 << (bank->eint_offset + hw))))
+ return -EINVAL;
+
+ if (hw <= 3) {
+ if (ddata->eint0_3_parent_only)
+ irq_set_chip_and_handler(virq, &s3c2410_eint0_3_chip,
+ handle_edge_irq);
+ else
+ irq_set_chip_and_handler(virq, &s3c2412_eint0_3_chip,
+ handle_edge_irq);
+ } else {
+ irq_set_chip_and_handler(virq, &s3c24xx_eint_chip,
+ handle_edge_irq);
+ }
+ irq_set_chip_data(virq, bank);
+ set_irq_flags(virq, IRQF_VALID);
+ return 0;
+}
+
+static const struct irq_domain_ops s3c24xx_gpf_irq_ops = {
+ .map = s3c24xx_gpf_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static int s3c24xx_gpg_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct s3c24xx_eint_domain_data *ddata = h->host_data;
+ struct samsung_pin_bank *bank = ddata->bank;
+
+ if (!(bank->eint_mask & (1 << (bank->eint_offset + hw))))
+ return -EINVAL;
+
+ irq_set_chip_and_handler(virq, &s3c24xx_eint_chip, handle_edge_irq);
+ irq_set_chip_data(virq, bank);
+ set_irq_flags(virq, IRQF_VALID);
+ return 0;
+}
+
+static const struct irq_domain_ops s3c24xx_gpg_irq_ops = {
+ .map = s3c24xx_gpg_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static const struct of_device_id s3c24xx_eint_irq_ids[] = {
+ { .compatible = "samsung,s3c2410-wakeup-eint", .data = (void *)1 },
+ { .compatible = "samsung,s3c2412-wakeup-eint", .data = (void *)0 },
+ { }
+};
+
+static int s3c24xx_eint_init(struct samsung_pinctrl_drv_data *d)
+{
+ struct device *dev = d->dev;
+ const struct of_device_id *match;
+ struct device_node *eint_np = NULL;
+ struct device_node *np;
+ struct samsung_pin_bank *bank;
+ struct s3c24xx_eint_data *eint_data;
+ const struct irq_domain_ops *ops;
+ unsigned int i;
+ bool eint0_3_parent_only;
+ irq_flow_handler_t *handlers;
+
+ for_each_child_of_node(dev->of_node, np) {
+ match = of_match_node(s3c24xx_eint_irq_ids, np);
+ if (match) {
+ eint_np = np;
+ eint0_3_parent_only = (bool)match->data;
+ break;
+ }
+ }
+ if (!eint_np)
+ return -ENODEV;
+
+ eint_data = devm_kzalloc(dev, sizeof(*eint_data), GFP_KERNEL);
+ if (!eint_data)
+ return -ENOMEM;
+
+ eint_data->drvdata = d;
+
+ handlers = eint0_3_parent_only ? s3c2410_eint_handlers
+ : s3c2412_eint_handlers;
+ for (i = 0; i < NUM_EINT_IRQ; ++i) {
+ unsigned int irq;
+
+ irq = irq_of_parse_and_map(eint_np, i);
+ if (!irq) {
+ dev_err(dev, "failed to get wakeup EINT IRQ %d\n", i);
+ return -ENXIO;
+ }
+
+ eint_data->parents[i] = irq;
+ irq_set_chained_handler(irq, handlers[i]);
+ irq_set_handler_data(irq, eint_data);
+ }
+
+ bank = d->ctrl->pin_banks;
+ for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
+ struct s3c24xx_eint_domain_data *ddata;
+ unsigned int mask;
+ unsigned int irq;
+ unsigned int pin;
+
+ if (bank->eint_type != EINT_TYPE_WKUP)
+ continue;
+
+ ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ ddata->bank = bank;
+ ddata->eint_data = eint_data;
+ ddata->eint0_3_parent_only = eint0_3_parent_only;
+
+ ops = (bank->eint_offset == 0) ? &s3c24xx_gpf_irq_ops
+ : &s3c24xx_gpg_irq_ops;
+
+ bank->irq_domain = irq_domain_add_linear(bank->of_node,
+ bank->nr_pins, ops, ddata);
+ if (!bank->irq_domain) {
+ dev_err(dev, "wkup irq domain add failed\n");
+ return -ENXIO;
+ }
+
+ irq = bank->eint_offset;
+ mask = bank->eint_mask;
+ for (pin = 0; mask; ++pin, mask >>= 1) {
+ if (irq > NUM_EINT)
+ break;
+ if (!(mask & 1))
+ continue;
+ eint_data->domains[irq] = bank->irq_domain;
+ ++irq;
+ }
+ }
+
+ return 0;
+}
+
+static struct samsung_pin_bank s3c2412_pin_banks[] = {
+ PIN_BANK_A(23, 0x000, "gpa"),
+ PIN_BANK_2BIT(11, 0x010, "gpb"),
+ PIN_BANK_2BIT(16, 0x020, "gpc"),
+ PIN_BANK_2BIT(16, 0x030, "gpd"),
+ PIN_BANK_2BIT(16, 0x040, "gpe"),
+ PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
+ PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00),
+ PIN_BANK_2BIT(11, 0x070, "gph"),
+ PIN_BANK_2BIT(13, 0x080, "gpj"),
+};
+
+struct samsung_pin_ctrl s3c2412_pin_ctrl[] = {
+ {
+ .pin_banks = s3c2412_pin_banks,
+ .nr_banks = ARRAY_SIZE(s3c2412_pin_banks),
+ .eint_wkup_init = s3c24xx_eint_init,
+ .label = "S3C2412-GPIO",
+ },
+};
+
+static struct samsung_pin_bank s3c2416_pin_banks[] = {
+ PIN_BANK_A(27, 0x000, "gpa"),
+ PIN_BANK_2BIT(11, 0x010, "gpb"),
+ PIN_BANK_2BIT(16, 0x020, "gpc"),
+ PIN_BANK_2BIT(16, 0x030, "gpd"),
+ PIN_BANK_2BIT(16, 0x040, "gpe"),
+ PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
+ PIN_BANK_2BIT_EINTW(8, 0x060, "gpg", 8, 0xff00),
+ PIN_BANK_2BIT(15, 0x070, "gph"),
+ PIN_BANK_2BIT(16, 0x0e0, "gpk"),
+ PIN_BANK_2BIT(14, 0x0f0, "gpl"),
+ PIN_BANK_2BIT(2, 0x100, "gpm"),
+};
+
+struct samsung_pin_ctrl s3c2416_pin_ctrl[] = {
+ {
+ .pin_banks = s3c2416_pin_banks,
+ .nr_banks = ARRAY_SIZE(s3c2416_pin_banks),
+ .eint_wkup_init = s3c24xx_eint_init,
+ .label = "S3C2416-GPIO",
+ },
+};
+
+static struct samsung_pin_bank s3c2440_pin_banks[] = {
+ PIN_BANK_A(25, 0x000, "gpa"),
+ PIN_BANK_2BIT(11, 0x010, "gpb"),
+ PIN_BANK_2BIT(16, 0x020, "gpc"),
+ PIN_BANK_2BIT(16, 0x030, "gpd"),
+ PIN_BANK_2BIT(16, 0x040, "gpe"),
+ PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
+ PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00),
+ PIN_BANK_2BIT(11, 0x070, "gph"),
+ PIN_BANK_2BIT(13, 0x0d0, "gpj"),
+};
+
+struct samsung_pin_ctrl s3c2440_pin_ctrl[] = {
+ {
+ .pin_banks = s3c2440_pin_banks,
+ .nr_banks = ARRAY_SIZE(s3c2440_pin_banks),
+ .eint_wkup_init = s3c24xx_eint_init,
+ .label = "S3C2440-GPIO",
+ },
+};
+
+static struct samsung_pin_bank s3c2450_pin_banks[] = {
+ PIN_BANK_A(28, 0x000, "gpa"),
+ PIN_BANK_2BIT(11, 0x010, "gpb"),
+ PIN_BANK_2BIT(16, 0x020, "gpc"),
+ PIN_BANK_2BIT(16, 0x030, "gpd"),
+ PIN_BANK_2BIT(16, 0x040, "gpe"),
+ PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
+ PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00),
+ PIN_BANK_2BIT(15, 0x070, "gph"),
+ PIN_BANK_2BIT(16, 0x0d0, "gpj"),
+ PIN_BANK_2BIT(16, 0x0e0, "gpk"),
+ PIN_BANK_2BIT(15, 0x0f0, "gpl"),
+ PIN_BANK_2BIT(2, 0x100, "gpm"),
+};
+
+struct samsung_pin_ctrl s3c2450_pin_ctrl[] = {
+ {
+ .pin_banks = s3c2450_pin_banks,
+ .nr_banks = ARRAY_SIZE(s3c2450_pin_banks),
+ .eint_wkup_init = s3c24xx_eint_init,
+ .label = "S3C2450-GPIO",
+ },
+};
diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c
index 63ac22e89678..e67ff1b8042c 100644
--- a/drivers/pinctrl/pinctrl-samsung.c
+++ b/drivers/pinctrl/pinctrl-samsung.c
@@ -1118,6 +1118,16 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
{ .compatible = "samsung,s3c64xx-pinctrl",
.data = s3c64xx_pin_ctrl },
#endif
+#ifdef CONFIG_PINCTRL_S3C24XX
+ { .compatible = "samsung,s3c2412-pinctrl",
+ .data = s3c2412_pin_ctrl },
+ { .compatible = "samsung,s3c2416-pinctrl",
+ .data = s3c2416_pin_ctrl },
+ { .compatible = "samsung,s3c2440-pinctrl",
+ .data = s3c2440_pin_ctrl },
+ { .compatible = "samsung,s3c2450-pinctrl",
+ .data = s3c2450_pin_ctrl },
+#endif
{},
};
MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match);
diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h
index 26d3519240c9..79fcc2076c00 100644
--- a/drivers/pinctrl/pinctrl-samsung.h
+++ b/drivers/pinctrl/pinctrl-samsung.h
@@ -255,5 +255,9 @@ extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
extern struct samsung_pin_ctrl exynos5250_pin_ctrl[];
extern struct samsung_pin_ctrl s3c64xx_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2412_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2416_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2440_pin_ctrl[];
+extern struct samsung_pin_ctrl s3c2450_pin_ctrl[];
#endif /* __PINCTRL_SAMSUNG_H */
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c b/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
index bbff5596e922..82bf6aba0074 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
@@ -1488,6 +1488,66 @@ IRQC_PINS_MUX(326, 54);
IRQC_PINS_MUX(327, 55);
IRQC_PINS_MUX(328, 56);
IRQC_PINS_MUX(329, 57);
+/* - MMCIF0 ----------------------------------------------------------------- */
+static const unsigned int mmc0_data1_pins[] = {
+ /* D[0] */
+ 164,
+};
+static const unsigned int mmc0_data1_mux[] = {
+ MMCD0_0_MARK,
+};
+static const unsigned int mmc0_data4_pins[] = {
+ /* D[0:3] */
+ 164, 165, 166, 167,
+};
+static const unsigned int mmc0_data4_mux[] = {
+ MMCD0_0_MARK, MMCD0_1_MARK, MMCD0_2_MARK, MMCD0_3_MARK,
+};
+static const unsigned int mmc0_data8_pins[] = {
+ /* D[0:7] */
+ 164, 165, 166, 167, 168, 169, 170, 171,
+};
+static const unsigned int mmc0_data8_mux[] = {
+ MMCD0_0_MARK, MMCD0_1_MARK, MMCD0_2_MARK, MMCD0_3_MARK,
+ MMCD0_4_MARK, MMCD0_5_MARK, MMCD0_6_MARK, MMCD0_7_MARK,
+};
+static const unsigned int mmc0_ctrl_pins[] = {
+ /* CMD, CLK */
+ 172, 173,
+};
+static const unsigned int mmc0_ctrl_mux[] = {
+ MMCCMD0_MARK, MMCCLK0_MARK,
+};
+/* - MMCIF1 ----------------------------------------------------------------- */
+static const unsigned int mmc1_data1_pins[] = {
+ /* D[0] */
+ 199,
+};
+static const unsigned int mmc1_data1_mux[] = {
+ MMCD1_0_MARK,
+};
+static const unsigned int mmc1_data4_pins[] = {
+ /* D[0:3] */
+ 199, 198, 197, 196,
+};
+static const unsigned int mmc1_data4_mux[] = {
+ MMCD1_0_MARK, MMCD1_1_MARK, MMCD1_2_MARK, MMCD1_3_MARK,
+};
+static const unsigned int mmc1_data8_pins[] = {
+ /* D[0:7] */
+ 199, 198, 197, 196, 195, 194, 193, 192,
+};
+static const unsigned int mmc1_data8_mux[] = {
+ MMCD1_0_MARK, MMCD1_1_MARK, MMCD1_2_MARK, MMCD1_3_MARK,
+ MMCD1_4_MARK, MMCD1_5_MARK, MMCD1_6_MARK, MMCD1_7_MARK,
+};
+static const unsigned int mmc1_ctrl_pins[] = {
+ /* CMD, CLK */
+ 200, 203,
+};
+static const unsigned int mmc1_ctrl_mux[] = {
+ MMCCMD1_MARK, MMCCLK1_MARK,
+};
/* - SCIFA0 ----------------------------------------------------------------- */
static const unsigned int scifa0_data_pins[] = {
/* SCIFA0_RXD, SCIFA0_TXD */
@@ -1683,6 +1743,86 @@ static const unsigned int scifb3_ctrl_b_pins[] = {
static const unsigned int scifb3_ctrl_b_mux[] = {
SCIFB3_RTS_38_MARK, SCIFB3_CTS_39_MARK,
};
+/* - SDHI0 ------------------------------------------------------------------ */
+static const unsigned int sdhi0_data1_pins[] = {
+ /* D0 */
+ 302,
+};
+static const unsigned int sdhi0_data1_mux[] = {
+ SDHID0_0_MARK,
+};
+static const unsigned int sdhi0_data4_pins[] = {
+ /* D[0:3] */
+ 302, 303, 304, 305,
+};
+static const unsigned int sdhi0_data4_mux[] = {
+ SDHID0_0_MARK, SDHID0_1_MARK, SDHID0_2_MARK, SDHID0_3_MARK,
+};
+static const unsigned int sdhi0_ctrl_pins[] = {
+ /* CLK, CMD */
+ 308, 306,
+};
+static const unsigned int sdhi0_ctrl_mux[] = {
+ SDHICLK0_MARK, SDHICMD0_MARK,
+};
+static const unsigned int sdhi0_cd_pins[] = {
+ /* CD */
+ 301,
+};
+static const unsigned int sdhi0_cd_mux[] = {
+ SDHICD0_MARK,
+};
+static const unsigned int sdhi0_wp_pins[] = {
+ /* WP */
+ 307,
+};
+static const unsigned int sdhi0_wp_mux[] = {
+ SDHIWP0_MARK,
+};
+/* - SDHI1 ------------------------------------------------------------------ */
+static const unsigned int sdhi1_data1_pins[] = {
+ /* D0 */
+ 289,
+};
+static const unsigned int sdhi1_data1_mux[] = {
+ SDHID1_0_MARK,
+};
+static const unsigned int sdhi1_data4_pins[] = {
+ /* D[0:3] */
+ 289, 290, 291, 292,
+};
+static const unsigned int sdhi1_data4_mux[] = {
+ SDHID1_0_MARK, SDHID1_1_MARK, SDHID1_2_MARK, SDHID1_3_MARK,
+};
+static const unsigned int sdhi1_ctrl_pins[] = {
+ /* CLK, CMD */
+ 293, 294,
+};
+static const unsigned int sdhi1_ctrl_mux[] = {
+ SDHICLK1_MARK, SDHICMD1_MARK,
+};
+/* - SDHI2 ------------------------------------------------------------------ */
+static const unsigned int sdhi2_data1_pins[] = {
+ /* D0 */
+ 295,
+};
+static const unsigned int sdhi2_data1_mux[] = {
+ SDHID2_0_MARK,
+};
+static const unsigned int sdhi2_data4_pins[] = {
+ /* D[0:3] */
+ 295, 296, 297, 298,
+};
+static const unsigned int sdhi2_data4_mux[] = {
+ SDHID2_0_MARK, SDHID2_1_MARK, SDHID2_2_MARK, SDHID2_3_MARK,
+};
+static const unsigned int sdhi2_ctrl_pins[] = {
+ /* CLK, CMD */
+ 299, 300,
+};
+static const unsigned int sdhi2_ctrl_mux[] = {
+ SDHICLK2_MARK, SDHICMD2_MARK,
+};
static const struct sh_pfc_pin_group pinmux_groups[] = {
SH_PFC_PIN_GROUP(irqc_irq0),
@@ -1743,6 +1883,14 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
SH_PFC_PIN_GROUP(irqc_irq55),
SH_PFC_PIN_GROUP(irqc_irq56),
SH_PFC_PIN_GROUP(irqc_irq57),
+ SH_PFC_PIN_GROUP(mmc0_data1),
+ SH_PFC_PIN_GROUP(mmc0_data4),
+ SH_PFC_PIN_GROUP(mmc0_data8),
+ SH_PFC_PIN_GROUP(mmc0_ctrl),
+ SH_PFC_PIN_GROUP(mmc1_data1),
+ SH_PFC_PIN_GROUP(mmc1_data4),
+ SH_PFC_PIN_GROUP(mmc1_data8),
+ SH_PFC_PIN_GROUP(mmc1_ctrl),
SH_PFC_PIN_GROUP(scifa0_data),
SH_PFC_PIN_GROUP(scifa0_clk),
SH_PFC_PIN_GROUP(scifa0_ctrl),
@@ -1770,6 +1918,17 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
SH_PFC_PIN_GROUP(scifb3_data_b),
SH_PFC_PIN_GROUP(scifb3_clk_b),
SH_PFC_PIN_GROUP(scifb3_ctrl_b),
+ SH_PFC_PIN_GROUP(sdhi0_data1),
+ SH_PFC_PIN_GROUP(sdhi0_data4),
+ SH_PFC_PIN_GROUP(sdhi0_ctrl),
+ SH_PFC_PIN_GROUP(sdhi0_cd),
+ SH_PFC_PIN_GROUP(sdhi0_wp),
+ SH_PFC_PIN_GROUP(sdhi1_data1),
+ SH_PFC_PIN_GROUP(sdhi1_data4),
+ SH_PFC_PIN_GROUP(sdhi1_ctrl),
+ SH_PFC_PIN_GROUP(sdhi2_data1),
+ SH_PFC_PIN_GROUP(sdhi2_data4),
+ SH_PFC_PIN_GROUP(sdhi2_ctrl),
};
static const char * const irqc_groups[] = {
@@ -1833,6 +1992,20 @@ static const char * const irqc_groups[] = {
"irqc_irq57",
};
+static const char * const mmc0_groups[] = {
+ "mmc0_data1",
+ "mmc0_data4",
+ "mmc0_data8",
+ "mmc0_ctrl",
+};
+
+static const char * const mmc1_groups[] = {
+ "mmc1_data1",
+ "mmc1_data4",
+ "mmc1_data8",
+ "mmc1_ctrl",
+};
+
static const char * const scifa0_groups[] = {
"scifa0_data",
"scifa0_clk",
@@ -1878,14 +2051,39 @@ static const char * const scifb3_groups[] = {
"scifb3_ctrl_b",
};
+static const char * const sdhi0_groups[] = {
+ "sdhi0_data1",
+ "sdhi0_data4",
+ "sdhi0_ctrl",
+ "sdhi0_cd",
+ "sdhi0_wp",
+};
+
+static const char * const sdhi1_groups[] = {
+ "sdhi1_data1",
+ "sdhi1_data4",
+ "sdhi1_ctrl",
+};
+
+static const char * const sdhi2_groups[] = {
+ "sdhi2_data1",
+ "sdhi2_data4",
+ "sdhi2_ctrl",
+};
+
static const struct sh_pfc_function pinmux_functions[] = {
SH_PFC_FUNCTION(irqc),
+ SH_PFC_FUNCTION(mmc0),
+ SH_PFC_FUNCTION(mmc1),
SH_PFC_FUNCTION(scifa0),
SH_PFC_FUNCTION(scifa1),
SH_PFC_FUNCTION(scifb0),
SH_PFC_FUNCTION(scifb1),
SH_PFC_FUNCTION(scifb2),
SH_PFC_FUNCTION(scifb3),
+ SH_PFC_FUNCTION(sdhi0),
+ SH_PFC_FUNCTION(sdhi1),
+ SH_PFC_FUNCTION(sdhi2),
};
#undef PORTCR
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7778.c b/drivers/pinctrl/sh-pfc/pfc-r8a7778.c
index 1dcbabcd7b3c..f9039102bb43 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7778.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7778.c
@@ -1447,11 +1447,11 @@ MMC_PFC_PINS(mmc_ctrl, RCAR_GP_PIN(1, 5), RCAR_GP_PIN(1, 6));
MMC_PFC_CTRL(mmc_ctrl, MMC_CLK, MMC_CMD);
MMC_PFC_PINS(mmc_data1, RCAR_GP_PIN(1, 7));
MMC_PFC_DAT1(mmc_data1, MMC_D0);
-MMC_PFC_PINS(mmc_data4, RCAR_GP_PIN(1, 7), RCAR_GP_PIN(2, 8),
+MMC_PFC_PINS(mmc_data4, RCAR_GP_PIN(1, 7), RCAR_GP_PIN(1, 8),
RCAR_GP_PIN(0, 5), RCAR_GP_PIN(0, 6));
MMC_PFC_DAT4(mmc_data4, MMC_D0, MMC_D1,
MMC_D2, MMC_D3);
-MMC_PFC_PINS(mmc_data8, RCAR_GP_PIN(1, 7), RCAR_GP_PIN(2, 8),
+MMC_PFC_PINS(mmc_data8, RCAR_GP_PIN(1, 7), RCAR_GP_PIN(1, 8),
RCAR_GP_PIN(0, 5), RCAR_GP_PIN(0, 6),
RCAR_GP_PIN(1, 4), RCAR_GP_PIN(1, 0),
RCAR_GP_PIN(0, 30), RCAR_GP_PIN(0, 31));
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
index 85d77a417c0e..14f3ec267e1f 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
@@ -1979,6 +1979,141 @@ static const unsigned int scif1_clk_e_pins[] = {
static const unsigned int scif1_clk_e_mux[] = {
SCK1_E_MARK,
};
+/* - HSCIF0 ----------------------------------------------------------------- */
+static const unsigned int hscif0_data_pins[] = {
+ /* RX, TX */
+ RCAR_GP_PIN(5, 8), RCAR_GP_PIN(5, 9),
+};
+static const unsigned int hscif0_data_mux[] = {
+ HRX0_MARK, HTX0_MARK,
+};
+static const unsigned int hscif0_clk_pins[] = {
+ /* SCK */
+ RCAR_GP_PIN(5, 7),
+};
+static const unsigned int hscif0_clk_mux[] = {
+ HSCK0_MARK,
+};
+static const unsigned int hscif0_ctrl_pins[] = {
+ /* RTS, CTS */
+ RCAR_GP_PIN(5, 11), RCAR_GP_PIN(5, 10),
+};
+static const unsigned int hscif0_ctrl_mux[] = {
+ HRTS0_N_MARK, HCTS0_N_MARK,
+};
+static const unsigned int hscif0_data_b_pins[] = {
+ /* RX, TX */
+ RCAR_GP_PIN(1, 23), RCAR_GP_PIN(1, 12),
+};
+static const unsigned int hscif0_data_b_mux[] = {
+ HRX0_B_MARK, HTX0_B_MARK,
+};
+static const unsigned int hscif0_ctrl_b_pins[] = {
+ /* RTS, CTS */
+ RCAR_GP_PIN(1, 29), RCAR_GP_PIN(1, 28),
+};
+static const unsigned int hscif0_ctrl_b_mux[] = {
+ HRTS0_N_B_MARK, HCTS0_N_B_MARK,
+};
+static const unsigned int hscif0_data_c_pins[] = {
+ /* RX, TX */
+ RCAR_GP_PIN(5, 13), RCAR_GP_PIN(5, 16),
+};
+static const unsigned int hscif0_data_c_mux[] = {
+ HRX0_C_MARK, HTX0_C_MARK,
+};
+static const unsigned int hscif0_ctrl_c_pins[] = {
+ /* RTS, CTS */
+ RCAR_GP_PIN(5, 3), RCAR_GP_PIN(5, 7),
+};
+static const unsigned int hscif0_ctrl_c_mux[] = {
+ HRTS0_N_C_MARK, HCTS0_N_C_MARK,
+};
+static const unsigned int hscif0_data_d_pins[] = {
+ /* RX, TX */
+ RCAR_GP_PIN(3, 20), RCAR_GP_PIN(3, 21),
+};
+static const unsigned int hscif0_data_d_mux[] = {
+ HRX0_D_MARK, HTX0_D_MARK,
+};
+static const unsigned int hscif0_ctrl_d_pins[] = {
+ /* RTS, CTS */
+ RCAR_GP_PIN(3, 23), RCAR_GP_PIN(3, 22),
+};
+static const unsigned int hscif0_ctrl_d_mux[] = {
+ HRTS0_N_D_MARK, HCTS0_N_D_MARK,
+};
+static const unsigned int hscif0_data_e_pins[] = {
+ /* RX, TX */
+ RCAR_GP_PIN(2, 21), RCAR_GP_PIN(2, 22),
+};
+static const unsigned int hscif0_data_e_mux[] = {
+ HRX0_E_MARK, HTX0_E_MARK,
+};
+static const unsigned int hscif0_ctrl_e_pins[] = {
+ /* RTS, CTS */
+ RCAR_GP_PIN(2, 24), RCAR_GP_PIN(2, 23),
+};
+static const unsigned int hscif0_ctrl_e_mux[] = {
+ HRTS0_N_E_MARK, HCTS0_N_E_MARK,
+};
+static const unsigned int hscif0_data_f_pins[] = {
+ /* RX, TX */
+ RCAR_GP_PIN(2, 23), RCAR_GP_PIN(2, 25),
+};
+static const unsigned int hscif0_data_f_mux[] = {
+ HRX0_F_MARK, HTX0_F_MARK,
+};
+static const unsigned int hscif0_ctrl_f_pins[] = {
+ /* RTS, CTS */
+ RCAR_GP_PIN(2, 26), RCAR_GP_PIN(2, 24),
+};
+static const unsigned int hscif0_ctrl_f_mux[] = {
+ HRTS0_N_F_MARK, HCTS0_N_F_MARK,
+};
+/* - HSCIF1 ----------------------------------------------------------------- */
+static const unsigned int hscif1_data_pins[] = {
+ /* RX, TX */
+ RCAR_GP_PIN(4, 28), RCAR_GP_PIN(4, 29),
+};
+static const unsigned int hscif1_data_mux[] = {
+ HRX1_MARK, HTX1_MARK,
+};
+static const unsigned int hscif1_clk_pins[] = {
+ /* SCK */
+ RCAR_GP_PIN(4, 27),
+};
+static const unsigned int hscif1_clk_mux[] = {
+ HSCK1_MARK,
+};
+static const unsigned int hscif1_ctrl_pins[] = {
+ /* RTS, CTS */
+ RCAR_GP_PIN(4, 31), RCAR_GP_PIN(4, 30),
+};
+static const unsigned int hscif1_ctrl_mux[] = {
+ HRTS1_N_MARK, HCTS1_N_MARK,
+};
+static const unsigned int hscif1_data_b_pins[] = {
+ /* RX, TX */
+ RCAR_GP_PIN(1, 12), RCAR_GP_PIN(1, 18),
+};
+static const unsigned int hscif1_data_b_mux[] = {
+ HRX1_B_MARK, HTX1_B_MARK,
+};
+static const unsigned int hscif1_clk_b_pins[] = {
+ /* SCK */
+ RCAR_GP_PIN(1, 28),
+};
+static const unsigned int hscif1_clk_b_mux[] = {
+ HSCK1_B_MARK,
+};
+static const unsigned int hscif1_ctrl_b_pins[] = {
+ /* RTS, CTS */
+ RCAR_GP_PIN(1, 14), RCAR_GP_PIN(1, 13),
+};
+static const unsigned int hscif1_ctrl_b_mux[] = {
+ HRTS1_N_B_MARK, HCTS1_N_B_MARK,
+};
/* - SCIFA0 ----------------------------------------------------------------- */
static const unsigned int scifa0_data_pins[] = {
/* RXD, TXD */
@@ -2371,8 +2506,7 @@ static const unsigned int tpu0_to3_pins[] = {
static const unsigned int tpu0_to3_mux[] = {
TPU0TO3_MARK,
};
-
-/* - MMCIF ------------------------------------------------------------------ */
+/* - MMCIF0 ----------------------------------------------------------------- */
static const unsigned int mmc0_data1_pins[] = {
/* D[0] */
RCAR_GP_PIN(3, 18),
@@ -2406,7 +2540,7 @@ static const unsigned int mmc0_ctrl_pins[] = {
static const unsigned int mmc0_ctrl_mux[] = {
MMC0_CLK_MARK, MMC0_CMD_MARK,
};
-
+/* - MMCIF1 ----------------------------------------------------------------- */
static const unsigned int mmc1_data1_pins[] = {
/* D[0] */
RCAR_GP_PIN(3, 26),
@@ -2427,7 +2561,7 @@ static const unsigned int mmc1_data8_pins[] = {
RCAR_GP_PIN(3, 26), RCAR_GP_PIN(3, 27),
RCAR_GP_PIN(3, 28), RCAR_GP_PIN(3, 29),
RCAR_GP_PIN(3, 30), RCAR_GP_PIN(3, 31),
- RCAR_GP_PIN(3, 13), RCAR_GP_PIN(3, 14),
+ RCAR_GP_PIN(3, 14), RCAR_GP_PIN(3, 15),
};
static const unsigned int mmc1_data8_mux[] = {
MMC1_D0_MARK, MMC1_D1_MARK, MMC1_D2_MARK, MMC1_D3_MARK,
@@ -2440,8 +2574,7 @@ static const unsigned int mmc1_ctrl_pins[] = {
static const unsigned int mmc1_ctrl_mux[] = {
MMC1_CLK_MARK, MMC1_CMD_MARK,
};
-
-/* - SDHI ------------------------------------------------------------------- */
+/* - SDHI0 ------------------------------------------------------------------ */
static const unsigned int sdhi0_data1_pins[] = {
/* D0 */
RCAR_GP_PIN(3, 2),
@@ -2477,7 +2610,7 @@ static const unsigned int sdhi0_wp_pins[] = {
static const unsigned int sdhi0_wp_mux[] = {
SD0_WP_MARK,
};
-
+/* - SDHI1 ------------------------------------------------------------------ */
static const unsigned int sdhi1_data1_pins[] = {
/* D0 */
RCAR_GP_PIN(3, 10),
@@ -2513,7 +2646,7 @@ static const unsigned int sdhi1_wp_pins[] = {
static const unsigned int sdhi1_wp_mux[] = {
SD1_WP_MARK,
};
-
+/* - SDHI2 ------------------------------------------------------------------ */
static const unsigned int sdhi2_data1_pins[] = {
/* D0 */
RCAR_GP_PIN(3, 18),
@@ -2549,7 +2682,7 @@ static const unsigned int sdhi2_wp_pins[] = {
static const unsigned int sdhi2_wp_mux[] = {
SD2_WP_MARK,
};
-
+/* - SDHI3 ------------------------------------------------------------------ */
static const unsigned int sdhi3_data1_pins[] = {
/* D0 */
RCAR_GP_PIN(3, 26),
@@ -2591,10 +2724,37 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
SH_PFC_PIN_GROUP(eth_magic),
SH_PFC_PIN_GROUP(eth_mdio),
SH_PFC_PIN_GROUP(eth_rmii),
+ SH_PFC_PIN_GROUP(hscif0_data),
+ SH_PFC_PIN_GROUP(hscif0_clk),
+ SH_PFC_PIN_GROUP(hscif0_ctrl),
+ SH_PFC_PIN_GROUP(hscif0_data_b),
+ SH_PFC_PIN_GROUP(hscif0_ctrl_b),
+ SH_PFC_PIN_GROUP(hscif0_data_c),
+ SH_PFC_PIN_GROUP(hscif0_ctrl_c),
+ SH_PFC_PIN_GROUP(hscif0_data_d),
+ SH_PFC_PIN_GROUP(hscif0_ctrl_d),
+ SH_PFC_PIN_GROUP(hscif0_data_e),
+ SH_PFC_PIN_GROUP(hscif0_ctrl_e),
+ SH_PFC_PIN_GROUP(hscif0_data_f),
+ SH_PFC_PIN_GROUP(hscif0_ctrl_f),
+ SH_PFC_PIN_GROUP(hscif1_data),
+ SH_PFC_PIN_GROUP(hscif1_clk),
+ SH_PFC_PIN_GROUP(hscif1_ctrl),
+ SH_PFC_PIN_GROUP(hscif1_data_b),
+ SH_PFC_PIN_GROUP(hscif1_clk_b),
+ SH_PFC_PIN_GROUP(hscif1_ctrl_b),
SH_PFC_PIN_GROUP(intc_irq0),
SH_PFC_PIN_GROUP(intc_irq1),
SH_PFC_PIN_GROUP(intc_irq2),
SH_PFC_PIN_GROUP(intc_irq3),
+ SH_PFC_PIN_GROUP(mmc0_data1),
+ SH_PFC_PIN_GROUP(mmc0_data4),
+ SH_PFC_PIN_GROUP(mmc0_data8),
+ SH_PFC_PIN_GROUP(mmc0_ctrl),
+ SH_PFC_PIN_GROUP(mmc1_data1),
+ SH_PFC_PIN_GROUP(mmc1_data4),
+ SH_PFC_PIN_GROUP(mmc1_data8),
+ SH_PFC_PIN_GROUP(mmc1_ctrl),
SH_PFC_PIN_GROUP(scif0_data),
SH_PFC_PIN_GROUP(scif0_clk),
SH_PFC_PIN_GROUP(scif0_ctrl),
@@ -2659,18 +2819,6 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
SH_PFC_PIN_GROUP(scifb2_clk_b),
SH_PFC_PIN_GROUP(scifb2_ctrl_b),
SH_PFC_PIN_GROUP(scifb2_data_c),
- SH_PFC_PIN_GROUP(tpu0_to0),
- SH_PFC_PIN_GROUP(tpu0_to1),
- SH_PFC_PIN_GROUP(tpu0_to2),
- SH_PFC_PIN_GROUP(tpu0_to3),
- SH_PFC_PIN_GROUP(mmc0_data1),
- SH_PFC_PIN_GROUP(mmc0_data4),
- SH_PFC_PIN_GROUP(mmc0_data8),
- SH_PFC_PIN_GROUP(mmc0_ctrl),
- SH_PFC_PIN_GROUP(mmc1_data1),
- SH_PFC_PIN_GROUP(mmc1_data4),
- SH_PFC_PIN_GROUP(mmc1_data8),
- SH_PFC_PIN_GROUP(mmc1_ctrl),
SH_PFC_PIN_GROUP(sdhi0_data1),
SH_PFC_PIN_GROUP(sdhi0_data4),
SH_PFC_PIN_GROUP(sdhi0_ctrl),
@@ -2691,6 +2839,10 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
SH_PFC_PIN_GROUP(sdhi3_ctrl),
SH_PFC_PIN_GROUP(sdhi3_cd),
SH_PFC_PIN_GROUP(sdhi3_wp),
+ SH_PFC_PIN_GROUP(tpu0_to0),
+ SH_PFC_PIN_GROUP(tpu0_to1),
+ SH_PFC_PIN_GROUP(tpu0_to2),
+ SH_PFC_PIN_GROUP(tpu0_to3),
};
static const char * const eth_groups[] = {
@@ -2726,6 +2878,31 @@ static const char * const scif1_groups[] = {
"scif1_clk_e",
};
+static const char * const hscif0_groups[] = {
+ "hscif0_data",
+ "hscif0_clk",
+ "hscif0_ctrl",
+ "hscif0_data_b",
+ "hscif0_ctrl_b",
+ "hscif0_data_c",
+ "hscif0_ctrl_c",
+ "hscif0_data_d",
+ "hscif0_ctrl_d",
+ "hscif0_data_e",
+ "hscif0_ctrl_e",
+ "hscif0_data_f",
+ "hscif0_ctrl_f",
+};
+
+static const char * const hscif1_groups[] = {
+ "hscif1_data",
+ "hscif1_clk",
+ "hscif1_ctrl",
+ "hscif1_data_b",
+ "hscif1_clk_b",
+ "hscif1_ctrl_b",
+};
+
static const char * const scifa0_groups[] = {
"scifa0_data",
"scifa0_clk",
@@ -2850,7 +3027,11 @@ static const char * const sdhi3_groups[] = {
static const struct sh_pfc_function pinmux_functions[] = {
SH_PFC_FUNCTION(eth),
+ SH_PFC_FUNCTION(hscif0),
+ SH_PFC_FUNCTION(hscif1),
SH_PFC_FUNCTION(intc),
+ SH_PFC_FUNCTION(mmc0),
+ SH_PFC_FUNCTION(mmc1),
SH_PFC_FUNCTION(scif0),
SH_PFC_FUNCTION(scif1),
SH_PFC_FUNCTION(scifa0),
@@ -2859,13 +3040,11 @@ static const struct sh_pfc_function pinmux_functions[] = {
SH_PFC_FUNCTION(scifb0),
SH_PFC_FUNCTION(scifb1),
SH_PFC_FUNCTION(scifb2),
- SH_PFC_FUNCTION(tpu0),
- SH_PFC_FUNCTION(mmc0),
- SH_PFC_FUNCTION(mmc1),
SH_PFC_FUNCTION(sdhi0),
SH_PFC_FUNCTION(sdhi1),
SH_PFC_FUNCTION(sdhi2),
SH_PFC_FUNCTION(sdhi3),
+ SH_PFC_FUNCTION(tpu0),
};
static struct pinmux_cfg_reg pinmux_config_regs[] = {
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index d4d377c40ec9..ce1743d0b679 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -14,8 +14,9 @@ config OMAP_REMOTEPROC
depends on HAS_DMA
depends on ARCH_OMAP4 || SOC_OMAP5
depends on OMAP_IOMMU
- depends on OMAP_MBOX_FWK
select REMOTEPROC
+ select MAILBOX
+ select OMAP2PLUS_MBOX
select RPMSG
help
Say y here to support OMAP's remote processors (dual M3
diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
index 0e396c155b3b..51689721ea7a 100644
--- a/drivers/remoteproc/omap_remoteproc.c
+++ b/drivers/remoteproc/omap_remoteproc.c
@@ -27,8 +27,8 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/remoteproc.h>
+#include <linux/omap-mailbox.h>
-#include <plat/mailbox.h>
#include <linux/platform_data/remoteproc-omap.h>
#include "omap_remoteproc.h"
diff --git a/drivers/staging/tidspbridge/Kconfig b/drivers/staging/tidspbridge/Kconfig
index 60848f198b48..165b918b8171 100644
--- a/drivers/staging/tidspbridge/Kconfig
+++ b/drivers/staging/tidspbridge/Kconfig
@@ -5,7 +5,8 @@
menuconfig TIDSPBRIDGE
tristate "DSP Bridge driver"
depends on ARCH_OMAP3 && !ARCH_MULTIPLATFORM
- select OMAP_MBOX_FWK
+ select MAILBOX
+ select OMAP2PLUS_MBOX
help
DSP/BIOS Bridge is designed for platforms that contain a GPP and
one or more attached DSPs. The GPP is considered the master or
diff --git a/drivers/staging/tidspbridge/include/dspbridge/host_os.h b/drivers/staging/tidspbridge/include/dspbridge/host_os.h
index 7f3a1db31619..d1441db469fc 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/host_os.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/host_os.h
@@ -41,7 +41,7 @@
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <plat/mailbox.h>
+#include <linux/omap-mailbox.h>
#include <linux/pagemap.h>
#include <asm/cacheflush.h>
#include <linux/dma-mapping.h>
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 01b8229fa862..62f6802f6e0f 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -155,7 +155,7 @@ config USB_LPC32XX
config USB_ATMEL_USBA
tristate "Atmel USBA"
- depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
+ depends on AVR32 || ARCH_AT91
help
USBA is the integrated high-speed USB Device controller on
the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 5a5128a226f7..1d9722203ca6 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -22,15 +22,13 @@
#include <linux/usb/atmel_usba_udc.h>
#include <linux/delay.h>
#include <linux/platform_data/atmel.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <asm/gpio.h>
#include "atmel_usba_udc.h"
-
-static struct usba_udc the_udc;
-static struct usba_ep *usba_ep;
-
#ifdef CONFIG_USB_GADGET_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/uaccess.h>
@@ -1014,16 +1012,13 @@ static void nop_release(struct device *dev)
}
-static struct usba_udc the_udc = {
- .gadget = {
- .ops = &usba_udc_ops,
- .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
- .max_speed = USB_SPEED_HIGH,
- .name = "atmel_usba_udc",
- .dev = {
- .init_name = "gadget",
- .release = nop_release,
- },
+struct usb_gadget usba_gadget_template = {
+ .ops = &usba_udc_ops,
+ .max_speed = USB_SPEED_HIGH,
+ .name = "atmel_usba_udc",
+ .dev = {
+ .init_name = "gadget",
+ .release = nop_release,
},
};
@@ -1147,7 +1142,7 @@ static int do_test_mode(struct usba_udc *udc)
* Test_SE0_NAK: Force high-speed mode and set up ep0
* for Bulk IN transfers
*/
- ep = &usba_ep[0];
+ ep = &udc->usba_ep[0];
usba_writel(udc, TST,
USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH));
usba_ep_writel(ep, CFG,
@@ -1165,7 +1160,7 @@ static int do_test_mode(struct usba_udc *udc)
break;
case 0x0400:
/* Test_Packet */
- ep = &usba_ep[0];
+ ep = &udc->usba_ep[0];
usba_ep_writel(ep, CFG,
USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
| USBA_EPT_DIR_IN
@@ -1668,7 +1663,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
for (i = 1; i < USBA_NR_ENDPOINTS; i++)
if (dma_status & (1 << i))
- usba_dma_irq(udc, &usba_ep[i]);
+ usba_dma_irq(udc, &udc->usba_ep[i]);
}
ep_status = USBA_BFEXT(EPT_INT, status);
@@ -1677,10 +1672,10 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
for (i = 0; i < USBA_NR_ENDPOINTS; i++)
if (ep_status & (1 << i)) {
- if (ep_is_control(&usba_ep[i]))
- usba_control_irq(udc, &usba_ep[i]);
+ if (ep_is_control(&udc->usba_ep[i]))
+ usba_control_irq(udc, &udc->usba_ep[i]);
else
- usba_ep_irq(udc, &usba_ep[i]);
+ usba_ep_irq(udc, &udc->usba_ep[i]);
}
}
@@ -1705,7 +1700,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
DBG(DBG_BUS, "%s bus reset detected\n",
usb_speed_string(udc->gadget.speed));
- ep0 = &usba_ep[0];
+ ep0 = &udc->usba_ep[0];
ep0->ep.desc = &usba_ep0_desc;
ep0->state = WAIT_FOR_SETUP;
usba_ep_writel(ep0, CFG,
@@ -1835,17 +1830,158 @@ static int atmel_usba_stop(struct usb_gadget *gadget,
return 0;
}
-static int __init usba_udc_probe(struct platform_device *pdev)
+#ifdef CONFIG_OF
+static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
+ struct usba_udc *udc)
+{
+ u32 val;
+ const char *name;
+ enum of_gpio_flags flags;
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *pp;
+ int i, ret;
+ struct usba_ep *eps, *ep;
+
+ udc->num_ep = 0;
+
+ udc->vbus_pin = of_get_named_gpio_flags(np, "atmel,vbus-gpio", 0,
+ &flags);
+ udc->vbus_pin_inverted = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
+
+ pp = NULL;
+ while ((pp = of_get_next_child(np, pp)))
+ udc->num_ep++;
+
+ eps = devm_kzalloc(&pdev->dev, sizeof(struct usba_ep) * udc->num_ep,
+ GFP_KERNEL);
+ if (!eps)
+ return ERR_PTR(-ENOMEM);
+
+ udc->gadget.ep0 = &eps[0].ep;
+
+ INIT_LIST_HEAD(&eps[0].ep.ep_list);
+
+ pp = NULL;
+ i = 0;
+ while ((pp = of_get_next_child(np, pp))) {
+ ep = &eps[i];
+
+ ret = of_property_read_u32(pp, "reg", &val);
+ if (ret) {
+ dev_err(&pdev->dev, "of_probe: reg error(%d)\n", ret);
+ goto err;
+ }
+ ep->index = val;
+
+ ret = of_property_read_u32(pp, "atmel,fifo-size", &val);
+ if (ret) {
+ dev_err(&pdev->dev, "of_probe: fifo-size error(%d)\n", ret);
+ goto err;
+ }
+ ep->fifo_size = val;
+
+ ret = of_property_read_u32(pp, "atmel,nb-banks", &val);
+ if (ret) {
+ dev_err(&pdev->dev, "of_probe: nb-banks error(%d)\n", ret);
+ goto err;
+ }
+ ep->nr_banks = val;
+
+ ep->can_dma = of_property_read_bool(pp, "atmel,can-dma");
+ ep->can_isoc = of_property_read_bool(pp, "atmel,can-isoc");
+
+ ret = of_property_read_string(pp, "name", &name);
+ ep->ep.name = name;
+
+ ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
+ ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
+ ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
+ ep->ep.ops = &usba_ep_ops;
+ ep->ep.maxpacket = ep->fifo_size;
+ ep->udc = udc;
+ INIT_LIST_HEAD(&ep->queue);
+
+ if (i)
+ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+
+ i++;
+ }
+
+ return eps;
+err:
+ return ERR_PTR(ret);
+}
+#else
+static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
+ struct usba_udc *udc)
+{
+ return ERR_PTR(-ENOSYS);
+}
+#endif
+
+static struct usba_ep * usba_udc_pdata(struct platform_device *pdev,
+ struct usba_udc *udc)
{
struct usba_platform_data *pdata = pdev->dev.platform_data;
+ struct usba_ep *eps;
+ int i;
+
+ if (!pdata)
+ return ERR_PTR(-ENXIO);
+
+ eps = devm_kzalloc(&pdev->dev, sizeof(struct usba_ep) * pdata->num_ep,
+ GFP_KERNEL);
+ if (!eps)
+ return ERR_PTR(-ENOMEM);
+
+ udc->gadget.ep0 = &eps[0].ep;
+
+ udc->vbus_pin = pdata->vbus_pin;
+ udc->vbus_pin_inverted = pdata->vbus_pin_inverted;
+ udc->num_ep = pdata->num_ep;
+
+ INIT_LIST_HEAD(&eps[0].ep.ep_list);
+
+ for (i = 0; i < pdata->num_ep; i++) {
+ struct usba_ep *ep = &eps[i];
+
+ ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
+ ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
+ ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
+ ep->ep.ops = &usba_ep_ops;
+ ep->ep.name = pdata->ep[i].name;
+ ep->fifo_size = ep->ep.maxpacket = pdata->ep[i].fifo_size;
+ ep->udc = udc;
+ INIT_LIST_HEAD(&ep->queue);
+ ep->nr_banks = pdata->ep[i].nr_banks;
+ ep->index = pdata->ep[i].index;
+ ep->can_dma = pdata->ep[i].can_dma;
+ ep->can_isoc = pdata->ep[i].can_isoc;
+
+ if (i)
+ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+ }
+
+ return eps;
+}
+
+static int __init usba_udc_probe(struct platform_device *pdev)
+{
struct resource *regs, *fifo;
struct clk *pclk, *hclk;
- struct usba_udc *udc = &the_udc;
+ struct usba_udc *udc;
int irq, ret, i;
+ udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL);
+ if (!udc)
+ return -ENOMEM;
+
+ udc->gadget = usba_gadget_template;
+ INIT_LIST_HEAD(&udc->gadget.ep_list);
+
regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
- if (!regs || !fifo || !pdata)
+ if (!regs || !fifo)
return -ENXIO;
irq = platform_get_irq(pdev, 0);
@@ -1891,46 +2027,14 @@ static int __init usba_udc_probe(struct platform_device *pdev)
usba_writel(udc, CTRL, USBA_DISABLE_MASK);
clk_disable(pclk);
- usba_ep = kzalloc(sizeof(struct usba_ep) * pdata->num_ep,
- GFP_KERNEL);
- if (!usba_ep)
- goto err_alloc_ep;
-
- the_udc.gadget.ep0 = &usba_ep[0].ep;
-
- INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
- usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
- usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
- usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
- usba_ep[0].ep.ops = &usba_ep_ops;
- usba_ep[0].ep.name = pdata->ep[0].name;
- usba_ep[0].ep.maxpacket = pdata->ep[0].fifo_size;
- usba_ep[0].udc = &the_udc;
- INIT_LIST_HEAD(&usba_ep[0].queue);
- usba_ep[0].fifo_size = pdata->ep[0].fifo_size;
- usba_ep[0].nr_banks = pdata->ep[0].nr_banks;
- usba_ep[0].index = pdata->ep[0].index;
- usba_ep[0].can_dma = pdata->ep[0].can_dma;
- usba_ep[0].can_isoc = pdata->ep[0].can_isoc;
-
- for (i = 1; i < pdata->num_ep; i++) {
- struct usba_ep *ep = &usba_ep[i];
-
- ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
- ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
- ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
- ep->ep.ops = &usba_ep_ops;
- ep->ep.name = pdata->ep[i].name;
- ep->ep.maxpacket = pdata->ep[i].fifo_size;
- ep->udc = &the_udc;
- INIT_LIST_HEAD(&ep->queue);
- ep->fifo_size = pdata->ep[i].fifo_size;
- ep->nr_banks = pdata->ep[i].nr_banks;
- ep->index = pdata->ep[i].index;
- ep->can_dma = pdata->ep[i].can_dma;
- ep->can_isoc = pdata->ep[i].can_isoc;
+ if (pdev->dev.of_node)
+ udc->usba_ep = atmel_udc_of_init(pdev, udc);
+ else
+ udc->usba_ep = usba_udc_pdata(pdev, udc);
- list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+ if (IS_ERR(udc->usba_ep)) {
+ ret = PTR_ERR(udc->usba_ep);
+ goto err_alloc_ep;
}
ret = request_irq(irq, usba_udc_irq, 0, "atmel_usba_udc", udc);
@@ -1941,16 +2045,12 @@ static int __init usba_udc_probe(struct platform_device *pdev)
}
udc->irq = irq;
- if (gpio_is_valid(pdata->vbus_pin)) {
- if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
- udc->vbus_pin = pdata->vbus_pin;
- udc->vbus_pin_inverted = pdata->vbus_pin_inverted;
-
+ if (gpio_is_valid(udc->vbus_pin)) {
+ if (!devm_gpio_request(&pdev->dev, udc->vbus_pin, "atmel_usba_udc")) {
ret = request_irq(gpio_to_irq(udc->vbus_pin),
usba_vbus_irq, 0,
"atmel_usba_udc", udc);
if (ret) {
- gpio_free(udc->vbus_pin);
udc->vbus_pin = -ENODEV;
dev_warn(&udc->pdev->dev,
"failed to request vbus irq; "
@@ -1969,20 +2069,17 @@ static int __init usba_udc_probe(struct platform_device *pdev)
goto err_add_udc;
usba_init_debugfs(udc);
- for (i = 1; i < pdata->num_ep; i++)
- usba_ep_init_debugfs(udc, &usba_ep[i]);
+ for (i = 1; i < udc->num_ep; i++)
+ usba_ep_init_debugfs(udc, &udc->usba_ep[i]);
return 0;
err_add_udc:
- if (gpio_is_valid(pdata->vbus_pin)) {
+ if (gpio_is_valid(udc->vbus_pin))
free_irq(gpio_to_irq(udc->vbus_pin), udc);
- gpio_free(udc->vbus_pin);
- }
free_irq(irq, udc);
err_request_irq:
- kfree(usba_ep);
err_alloc_ep:
iounmap(udc->fifo);
err_map_fifo:
@@ -1999,23 +2096,20 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
{
struct usba_udc *udc;
int i;
- struct usba_platform_data *pdata = pdev->dev.platform_data;
udc = platform_get_drvdata(pdev);
usb_del_gadget_udc(&udc->gadget);
- for (i = 1; i < pdata->num_ep; i++)
- usba_ep_cleanup_debugfs(&usba_ep[i]);
+ for (i = 1; i < udc->num_ep; i++)
+ usba_ep_cleanup_debugfs(&udc->usba_ep[i]);
usba_cleanup_debugfs(udc);
if (gpio_is_valid(udc->vbus_pin)) {
free_irq(gpio_to_irq(udc->vbus_pin), udc);
- gpio_free(udc->vbus_pin);
}
free_irq(udc->irq, udc);
- kfree(usba_ep);
iounmap(udc->fifo);
iounmap(udc->regs);
clk_put(udc->hclk);
@@ -2024,11 +2118,21 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
return 0;
}
+#if defined(CONFIG_OF)
+static const struct of_device_id atmel_udc_dt_ids[] = {
+ { .compatible = "atmel,at91sam9rl-udc" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_udc_dt_ids);
+#endif
+
static struct platform_driver udc_driver = {
.remove = __exit_p(usba_udc_remove),
.driver = {
.name = "atmel_usba_udc",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(atmel_udc_dt_ids),
},
};
diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
index d65a61851d3d..2922db50befe 100644
--- a/drivers/usb/gadget/atmel_usba_udc.h
+++ b/drivers/usb/gadget/atmel_usba_udc.h
@@ -317,8 +317,10 @@ struct usba_udc {
int irq;
int vbus_pin;
int vbus_pin_inverted;
+ int num_ep;
struct clk *pclk;
struct clk *hclk;
+ struct usba_ep *usba_ep;
u16 devstatus;
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 028ff4d07dc7..fce71b605936 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -25,11 +25,19 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/usb/musb-ux500.h>
#include "musb_core.h"
+static struct musb_hdrc_config ux500_musb_hdrc_config = {
+ .multipoint = true,
+ .dyn_fifo = true,
+ .num_eps = 16,
+ .ram_bits = 16,
+};
+
struct ux500_glue {
struct device *dev;
struct platform_device *musb;
@@ -187,15 +195,58 @@ static const struct musb_platform_ops ux500_ops = {
.set_vbus = ux500_musb_set_vbus,
};
+static struct musb_hdrc_platform_data *
+ux500_of_probe(struct platform_device *pdev, struct device_node *np)
+{
+ struct musb_hdrc_platform_data *pdata;
+ const char *mode;
+ int strlen;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ mode = of_get_property(np, "dr_mode", &strlen);
+ if (!mode) {
+ dev_err(&pdev->dev, "No 'dr_mode' property found\n");
+ return NULL;
+ }
+
+ if (strlen > 0) {
+ if (!strcmp(mode, "host"))
+ pdata->mode = MUSB_HOST;
+ if (!strcmp(mode, "otg"))
+ pdata->mode = MUSB_OTG;
+ if (!strcmp(mode, "peripheral"))
+ pdata->mode = MUSB_PERIPHERAL;
+ }
+
+ return pdata;
+}
+
static int ux500_probe(struct platform_device *pdev)
{
struct resource musb_resources[2];
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
+ struct device_node *np = pdev->dev.of_node;
struct platform_device *musb;
struct ux500_glue *glue;
struct clk *clk;
int ret = -ENOMEM;
+ if (!pdata) {
+ if (np) {
+ pdata = ux500_of_probe(pdev, np);
+ if (!pdata)
+ goto err0;
+
+ pdev->dev.platform_data = pdata;
+ } else {
+ dev_err(&pdev->dev, "no pdata or device tree found\n");
+ goto err0;
+ }
+ }
+
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
if (!glue) {
dev_err(&pdev->dev, "failed to allocate glue context\n");
@@ -222,14 +273,16 @@ static int ux500_probe(struct platform_device *pdev)
}
musb->dev.parent = &pdev->dev;
- musb->dev.dma_mask = pdev->dev.dma_mask;
+ musb->dev.dma_mask = &pdev->dev.coherent_dma_mask;
musb->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask;
+ musb->dev.of_node = pdev->dev.of_node;
glue->dev = &pdev->dev;
glue->musb = musb;
glue->clk = clk;
pdata->platform_ops = &ux500_ops;
+ pdata->config = &ux500_musb_hdrc_config;
platform_set_drvdata(pdev, glue);
@@ -334,12 +387,18 @@ static const struct dev_pm_ops ux500_pm_ops = {
#define DEV_PM_OPS NULL
#endif
+static const struct of_device_id ux500_match[] = {
+ { .compatible = "stericsson,db8500-musb", },
+ {}
+};
+
static struct platform_driver ux500_driver = {
.probe = ux500_probe,
.remove = ux500_remove,
.driver = {
.name = "musb-ux500",
.pm = DEV_PM_OPS,
+ .of_match_table = ux500_match,
},
};
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index 63e7c8a6b125..bfb7a65d83cc 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -34,6 +34,11 @@
#include <linux/platform_data/usb-musb-ux500.h>
#include "musb_core.h"
+static const char *iep_chan_names[] = { "iep_1_9", "iep_2_10", "iep_3_11", "iep_4_12",
+ "iep_5_13", "iep_6_14", "iep_7_15", "iep_8" };
+static const char *oep_chan_names[] = { "oep_1_9", "oep_2_10", "oep_3_11", "oep_4_12",
+ "oep_5_13", "oep_6_14", "oep_7_15", "oep_8" };
+
struct ux500_dma_channel {
struct dma_channel channel;
struct ux500_dma_controller *controller;
@@ -48,10 +53,8 @@ struct ux500_dma_channel {
struct ux500_dma_controller {
struct dma_controller controller;
- struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_CHANNELS];
- struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_TX_CHANNELS];
- u32 num_rx_channels;
- u32 num_tx_channels;
+ struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS];
+ struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS];
void *private_data;
dma_addr_t phy_base;
};
@@ -143,19 +146,15 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c,
struct ux500_dma_channel *ux500_channel = NULL;
struct musb *musb = controller->private_data;
u8 ch_num = hw_ep->epnum - 1;
- u32 max_ch;
- /* Max 8 DMA channels (0 - 7). Each DMA channel can only be allocated
+ /* 8 DMA channels (0 - 7). Each DMA channel can only be allocated
* to specified hw_ep. For example DMA channel 0 can only be allocated
* to hw_ep 1 and 9.
*/
if (ch_num > 7)
ch_num -= 8;
- max_ch = is_tx ? controller->num_tx_channels :
- controller->num_rx_channels;
-
- if (ch_num >= max_ch)
+ if (ch_num >= UX500_MUSB_DMA_NUM_RX_TX_CHANNELS)
return NULL;
ux500_channel = is_tx ? &(controller->tx_channel[ch_num]) :
@@ -263,7 +262,7 @@ static int ux500_dma_controller_stop(struct dma_controller *c)
struct dma_channel *channel;
u8 ch_num;
- for (ch_num = 0; ch_num < controller->num_rx_channels; ch_num++) {
+ for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) {
channel = &controller->rx_channel[ch_num].channel;
ux500_channel = channel->private_data;
@@ -273,7 +272,7 @@ static int ux500_dma_controller_stop(struct dma_controller *c)
dma_release_channel(ux500_channel->dma_chan);
}
- for (ch_num = 0; ch_num < controller->num_tx_channels; ch_num++) {
+ for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) {
channel = &controller->tx_channel[ch_num].channel;
ux500_channel = channel->private_data;
@@ -294,34 +293,36 @@ static int ux500_dma_controller_start(struct dma_controller *c)
struct musb *musb = controller->private_data;
struct device *dev = musb->controller;
struct musb_hdrc_platform_data *plat = dev->platform_data;
- struct ux500_musb_board_data *data = plat->board_data;
+ struct ux500_musb_board_data *data;
struct dma_channel *dma_channel = NULL;
+ char **chan_names;
u32 ch_num;
u8 dir;
u8 is_tx = 0;
void **param_array;
struct ux500_dma_channel *channel_array;
- u32 ch_count;
dma_cap_mask_t mask;
- if ((data->num_rx_channels > UX500_MUSB_DMA_NUM_RX_CHANNELS) ||
- (data->num_tx_channels > UX500_MUSB_DMA_NUM_TX_CHANNELS))
+ if (!plat) {
+ dev_err(musb->controller, "No platform data\n");
return -EINVAL;
+ }
- controller->num_rx_channels = data->num_rx_channels;
- controller->num_tx_channels = data->num_tx_channels;
+ data = plat->board_data;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
/* Prepare the loop for RX channels */
channel_array = controller->rx_channel;
- ch_count = data->num_rx_channels;
- param_array = data->dma_rx_param_array;
+ param_array = data ? data->dma_rx_param_array : NULL;
+ chan_names = (char **)iep_chan_names;
for (dir = 0; dir < 2; dir++) {
- for (ch_num = 0; ch_num < ch_count; ch_num++) {
+ for (ch_num = 0;
+ ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS;
+ ch_num++) {
ux500_channel = &channel_array[ch_num];
ux500_channel->controller = controller;
ux500_channel->ch_num = ch_num;
@@ -332,9 +333,15 @@ static int ux500_dma_controller_start(struct dma_controller *c)
dma_channel->status = MUSB_DMA_STATUS_FREE;
dma_channel->max_len = SZ_16M;
- ux500_channel->dma_chan = dma_request_channel(mask,
- data->dma_filter,
- param_array[ch_num]);
+ ux500_channel->dma_chan =
+ dma_request_slave_channel(dev, chan_names[ch_num]);
+
+ if (!ux500_channel->dma_chan)
+ ux500_channel->dma_chan =
+ dma_request_channel(mask,
+ data->dma_filter,
+ param_array[ch_num]);
+
if (!ux500_channel->dma_chan) {
ERR("Dma pipe allocation error dir=%d ch=%d\n",
dir, ch_num);
@@ -349,8 +356,8 @@ static int ux500_dma_controller_start(struct dma_controller *c)
/* Prepare the loop for TX channels */
channel_array = controller->tx_channel;
- ch_count = data->num_tx_channels;
- param_array = data->dma_tx_param_array;
+ param_array = data ? data->dma_tx_param_array : NULL;
+ chan_names = (char **)oep_chan_names;
is_tx = 1;
}
diff --git a/include/dt-bindings/clk/exynos-audss-clk.h b/include/dt-bindings/clk/exynos-audss-clk.h
new file mode 100644
index 000000000000..8279f427c60f
--- /dev/null
+++ b/include/dt-bindings/clk/exynos-audss-clk.h
@@ -0,0 +1,25 @@
+/*
+ * This header provides constants for Samsung audio subsystem
+ * clock controller.
+ *
+ * The constants defined in this header are being used in dts
+ * and exynos audss driver.
+ */
+
+#ifndef _DT_BINDINGS_CLK_EXYNOS_AUDSS_H
+#define _DT_BINDINGS_CLK_EXYNOS_AUDSS_H
+
+#define EXYNOS_MOUT_AUDSS 0
+#define EXYNOS_MOUT_I2S 1
+#define EXYNOS_DOUT_SRP 2
+#define EXYNOS_DOUT_AUD_BUS 3
+#define EXYNOS_DOUT_I2S 4
+#define EXYNOS_SRP_CLK 5
+#define EXYNOS_I2S_BUS 6
+#define EXYNOS_SCLK_I2S 7
+#define EXYNOS_PCM_BUS 8
+#define EXYNOS_SCLK_PCM 9
+
+#define EXYNOS_AUDSS_MAX_CLKS 10
+
+#endif
diff --git a/include/linux/omap-mailbox.h b/include/linux/omap-mailbox.h
new file mode 100644
index 000000000000..f8322d9cd235
--- /dev/null
+++ b/include/linux/omap-mailbox.h
@@ -0,0 +1,29 @@
+/*
+ * omap-mailbox: interprocessor communication module for OMAP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef OMAP_MAILBOX_H
+#define OMAP_MAILBOX_H
+
+typedef u32 mbox_msg_t;
+struct omap_mbox;
+
+typedef int __bitwise omap_mbox_irq_t;
+#define IRQ_TX ((__force omap_mbox_irq_t) 1)
+#define IRQ_RX ((__force omap_mbox_irq_t) 2)
+
+int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
+
+struct omap_mbox *omap_mbox_get(const char *, struct notifier_block *nb);
+void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb);
+
+void omap_mbox_save_ctx(struct omap_mbox *mbox);
+void omap_mbox_restore_ctx(struct omap_mbox *mbox);
+void omap_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+void omap_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+
+#endif /* OMAP_MAILBOX_H */
diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h
index 4b781014b0a0..1bb9b1852256 100644
--- a/include/linux/platform_data/dma-ste-dma40.h
+++ b/include/linux/platform_data/dma-ste-dma40.h
@@ -70,23 +70,8 @@ enum stedma40_flow_ctrl {
STEDMA40_FLOW_CTRL,
};
-enum stedma40_periph_data_width {
- STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
- STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
- STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
- STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
-};
-
-enum stedma40_xfer_dir {
- STEDMA40_MEM_TO_MEM = 1,
- STEDMA40_MEM_TO_PERIPH,
- STEDMA40_PERIPH_TO_MEM,
- STEDMA40_PERIPH_TO_PERIPH
-};
-
-
/**
- * struct stedma40_chan_cfg - dst/src channel configuration
+ * struct stedma40_half_channel_info - dst/src channel configuration
*
* @big_endian: true if the src/dst should be read as big endian
* @data_width: Data width of the src/dst hardware
@@ -95,7 +80,7 @@ enum stedma40_xfer_dir {
*/
struct stedma40_half_channel_info {
bool big_endian;
- enum stedma40_periph_data_width data_width;
+ enum dma_slave_buswidth data_width;
int psize;
enum stedma40_flow_ctrl flow_ctrl;
};
@@ -109,8 +94,7 @@ struct stedma40_half_channel_info {
* version 3+, i.e DB8500v2+
* @mode: channel mode: physical, logical, or operation
* @mode_opt: options for the chosen channel mode
- * @src_dev_type: Src device type
- * @dst_dev_type: Dst device type
+ * @dev_type: src/dst device type (driver uses dir to figure out which)
* @src_info: Parameters for dst half channel
* @dst_info: Parameters for dst half channel
* @use_fixed_channel: if true, use physical channel specified by phy_channel
@@ -121,13 +105,12 @@ struct stedma40_half_channel_info {
*
*/
struct stedma40_chan_cfg {
- enum stedma40_xfer_dir dir;
+ enum dma_transfer_direction dir;
bool high_priority;
bool realtime;
enum stedma40_mode mode;
enum stedma40_mode_opt mode_opt;
- int src_dev_type;
- int dst_dev_type;
+ int dev_type;
struct stedma40_half_channel_info src_info;
struct stedma40_half_channel_info dst_info;
@@ -138,13 +121,8 @@ struct stedma40_chan_cfg {
/**
* struct stedma40_platform_data - Configuration struct for the dma device.
*
- * @dev_len: length of dev_tx and dev_rx
* @dev_tx: mapping between destination event line and io address
* @dev_rx: mapping between source event line and io address
- * @memcpy: list of memcpy event lines
- * @memcpy_len: length of memcpy
- * @memcpy_conf_phy: default configuration of physical channel memcpy
- * @memcpy_conf_log: default configuration of logical channel memcpy
* @disabled_channels: A vector, ending with -1, that marks physical channels
* that are for different reasons not available for the driver.
* @soft_lli_chans: A vector, that marks physical channels will use LLI by SW
@@ -154,22 +132,17 @@ struct stedma40_chan_cfg {
* @num_of_soft_lli_chans: The number of channels that needs to be configured
* to use SoftLLI.
* @use_esram_lcla: flag for mapping the lcla into esram region
+ * @num_of_memcpy_chans: The number of channels reserved for memcpy.
* @num_of_phy_chans: The number of physical channels implemented in HW.
* 0 means reading the number of channels from DMA HW but this is only valid
* for 'multiple of 4' channels, like 8.
*/
struct stedma40_platform_data {
- u32 dev_len;
- const dma_addr_t *dev_tx;
- const dma_addr_t *dev_rx;
- int *memcpy;
- u32 memcpy_len;
- struct stedma40_chan_cfg *memcpy_conf_phy;
- struct stedma40_chan_cfg *memcpy_conf_log;
int disabled_channels[STEDMA40_MAX_PHYS];
int *soft_lli_chans;
int num_of_soft_lli_chans;
bool use_esram_lcla;
+ int num_of_memcpy_chans;
int num_of_phy_chans;
};
diff --git a/include/linux/platform_data/mailbox-omap.h b/include/linux/platform_data/mailbox-omap.h
new file mode 100644
index 000000000000..4631dbb4255e
--- /dev/null
+++ b/include/linux/platform_data/mailbox-omap.h
@@ -0,0 +1,58 @@
+/*
+ * mailbox-omap.h
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _PLAT_MAILBOX_H
+#define _PLAT_MAILBOX_H
+
+/* Interrupt register configuration types */
+#define MBOX_INTR_CFG_TYPE1 (0)
+#define MBOX_INTR_CFG_TYPE2 (1)
+
+/**
+ * struct omap_mbox_dev_info - OMAP mailbox device attribute info
+ * @name: name of the mailbox device
+ * @tx_id: mailbox queue id used for transmitting messages
+ * @rx_id: mailbox queue id on which messages are received
+ * @irq_id: irq identifier number to use from the hwmod data
+ * @usr_id: mailbox user id for identifying the interrupt into
+ * the MPU interrupt controller.
+ */
+struct omap_mbox_dev_info {
+ const char *name;
+ u32 tx_id;
+ u32 rx_id;
+ u32 irq_id;
+ u32 usr_id;
+};
+
+/**
+ * struct omap_mbox_pdata - OMAP mailbox platform data
+ * @intr_type: type of interrupt configuration registers used
+ while programming mailbox queue interrupts
+ * @num_users: number of users (processor devices) that the mailbox
+ * h/w block can interrupt
+ * @num_fifos: number of h/w fifos within the mailbox h/w block
+ * @info_cnt: number of mailbox devices for the platform
+ * @info: array of mailbox device attributes
+ */
+struct omap_mbox_pdata {
+ u32 intr_type;
+ u32 num_users;
+ u32 num_fifos;
+ u32 info_cnt;
+ struct omap_mbox_dev_info *info;
+};
+
+#endif /* _PLAT_MAILBOX_H */
diff --git a/include/linux/platform_data/usb-musb-ux500.h b/include/linux/platform_data/usb-musb-ux500.h
index 4c1cc50a595a..dd9c83ac7de0 100644
--- a/include/linux/platform_data/usb-musb-ux500.h
+++ b/include/linux/platform_data/usb-musb-ux500.h
@@ -9,14 +9,11 @@
#include <linux/dmaengine.h>
-#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8
-#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8
+#define UX500_MUSB_DMA_NUM_RX_TX_CHANNELS 8
struct ux500_musb_board_data {
void **dma_rx_param_array;
void **dma_tx_param_array;
- u32 num_rx_channels;
- u32 num_tx_channels;
bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
};
diff --git a/sound/soc/ux500/ux500_pcm.c b/sound/soc/ux500/ux500_pcm.c
index b6e5ae277299..31f9bbc74521 100644
--- a/sound/soc/ux500/ux500_pcm.c
+++ b/sound/soc/ux500/ux500_pcm.c
@@ -76,20 +76,20 @@ static struct dma_chan *ux500_pcm_request_chan(struct snd_soc_pcm_runtime *rtd,
dma_params = snd_soc_dai_get_dma_data(dai, substream);
dma_cfg = dma_params->dma_cfg;
- mem_data_width = STEDMA40_HALFWORD_WIDTH;
+ mem_data_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
switch (dma_params->data_size) {
case 32:
- per_data_width = STEDMA40_WORD_WIDTH;
+ per_data_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
break;
case 16:
- per_data_width = STEDMA40_HALFWORD_WIDTH;
+ per_data_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
break;
case 8:
- per_data_width = STEDMA40_BYTE_WIDTH;
+ per_data_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
break;
default:
- per_data_width = STEDMA40_WORD_WIDTH;
+ per_data_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {