summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/usb/usbip/vhci.h7
-rw-r--r--drivers/usb/usbip/vhci_hcd.c323
-rw-r--r--drivers/usb/usbip/vhci_sysfs.c109
-rw-r--r--tools/usb/usbip/libsrc/vhci_driver.c23
-rw-r--r--tools/usb/usbip/libsrc/vhci_driver.h8
-rw-r--r--tools/usb/usbip/src/usbip_attach.c3
6 files changed, 370 insertions, 103 deletions
diff --git a/drivers/usb/usbip/vhci.h b/drivers/usb/usbip/vhci.h
index 8a979fc00ac1..db28eb531e8c 100644
--- a/drivers/usb/usbip/vhci.h
+++ b/drivers/usb/usbip/vhci.h
@@ -72,6 +72,11 @@ struct vhci_unlink {
unsigned long unlink_seqnum;
};
+enum hub_speed {
+ HUB_SPEED_HIGH = 0,
+ HUB_SPEED_SUPER,
+};
+
/* Number of supported ports. Value has an upperbound of USB_MAXCHILDREN */
#ifdef CONFIG_USBIP_VHCI_HC_PORTS
#define VHCI_HC_PORTS CONFIG_USBIP_VHCI_HC_PORTS
@@ -140,7 +145,7 @@ static inline __u32 port_to_rhport(__u32 port)
static inline int port_to_pdev_nr(__u32 port)
{
- return port / VHCI_HC_PORTS;
+ return port / (VHCI_HC_PORTS * 2);
}
static inline struct vhci_hcd *hcd_to_vhci_hcd(struct usb_hcd *hcd)
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index c96dd44ff162..af42a6010205 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -232,6 +232,40 @@ done:
return changed ? retval : 0;
}
+/* usb 3.0 root hub device descriptor */
+static struct {
+ struct usb_bos_descriptor bos;
+ struct usb_ss_cap_descriptor ss_cap;
+} __packed usb3_bos_desc = {
+
+ .bos = {
+ .bLength = USB_DT_BOS_SIZE,
+ .bDescriptorType = USB_DT_BOS,
+ .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)),
+ .bNumDeviceCaps = 1,
+ },
+ .ss_cap = {
+ .bLength = USB_DT_USB_SS_CAP_SIZE,
+ .bDescriptorType = USB_DT_DEVICE_CAPABILITY,
+ .bDevCapabilityType = USB_SS_CAP_TYPE,
+ .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION),
+ .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION),
+ },
+};
+
+static inline void
+ss_hub_descriptor(struct usb_hub_descriptor *desc)
+{
+ memset(desc, 0, sizeof *desc);
+ desc->bDescriptorType = USB_DT_SS_HUB;
+ desc->bDescLength = 12;
+ desc->wHubCharacteristics = cpu_to_le16(
+ HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
+ desc->bNbrPorts = VHCI_HC_PORTS;
+ desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/
+ desc->u.ss.DeviceRemovable = 0xffff;
+}
+
static inline void hub_descriptor(struct usb_hub_descriptor *desc)
{
int width;
@@ -265,13 +299,15 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
/*
* NOTE:
- * wIndex shows the port number and begins from 1.
+ * wIndex (bits 0-7) shows the port number and begins from 1?
*/
+ wIndex = ((__u8)(wIndex & 0x00ff));
usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue,
wIndex);
+
if (wIndex > VHCI_HC_PORTS)
pr_err("invalid port number %d\n", wIndex);
- rhport = ((__u8)(wIndex & 0x00ff)) - 1;
+ rhport = wIndex - 1;
vhci_hcd = hcd_to_vhci_hcd(hcd);
vhci = vhci_hcd->vhci;
@@ -291,34 +327,26 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
case ClearPortFeature:
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
+ if (hcd->speed == HCD_USB3) {
+ pr_err(" ClearPortFeature: USB_PORT_FEAT_SUSPEND req not "
+ "supported for USB 3.0 roothub\n");
+ goto error;
+ }
+ usbip_dbg_vhci_rh(
+ " ClearPortFeature: USB_PORT_FEAT_SUSPEND\n");
if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_SUSPEND) {
/* 20msec signaling */
vhci_hcd->resuming = 1;
- vhci_hcd->re_timeout =
- jiffies + msecs_to_jiffies(20);
+ vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(20);
}
break;
case USB_PORT_FEAT_POWER:
usbip_dbg_vhci_rh(
" ClearPortFeature: USB_PORT_FEAT_POWER\n");
- vhci_hcd->port_status[rhport] = 0;
- vhci_hcd->resuming = 0;
- break;
- case USB_PORT_FEAT_C_RESET:
- usbip_dbg_vhci_rh(
- " ClearPortFeature: USB_PORT_FEAT_C_RESET\n");
- switch (vhci_hcd->vdev[rhport].speed) {
- case USB_SPEED_HIGH:
- vhci_hcd->port_status[rhport] |=
- USB_PORT_STAT_HIGH_SPEED;
- break;
- case USB_SPEED_LOW:
- vhci_hcd->port_status[rhport] |=
- USB_PORT_STAT_LOW_SPEED;
- break;
- default:
- break;
- }
+ if (hcd->speed == HCD_USB3)
+ vhci_hcd->port_status[rhport] &= ~USB_SS_PORT_STAT_POWER;
+ else
+ vhci_hcd->port_status[rhport] &= ~USB_PORT_STAT_POWER;
break;
default:
usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
@@ -329,7 +357,26 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
break;
case GetHubDescriptor:
usbip_dbg_vhci_rh(" GetHubDescriptor\n");
- hub_descriptor((struct usb_hub_descriptor *) buf);
+ if (hcd->speed == HCD_USB3 &&
+ (wLength < USB_DT_SS_HUB_SIZE ||
+ wValue != (USB_DT_SS_HUB << 8))) {
+ pr_err("Wrong hub descriptor type for USB 3.0 roothub.\n");
+ goto error;
+ }
+ if (hcd->speed == HCD_USB3)
+ ss_hub_descriptor((struct usb_hub_descriptor *) buf);
+ else
+ hub_descriptor((struct usb_hub_descriptor *) buf);
+ break;
+ case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+ if (hcd->speed != HCD_USB3)
+ goto error;
+
+ if ((wValue >> 8) != USB_DT_BOS)
+ goto error;
+
+ memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc));
+ retval = sizeof(usb3_bos_desc);
break;
case GetHubStatus:
usbip_dbg_vhci_rh(" GetHubStatus\n");
@@ -337,7 +384,7 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
break;
case GetPortStatus:
usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex);
- if (wIndex > VHCI_HC_PORTS || wIndex < 1) {
+ if (wIndex < 1) {
pr_err("invalid port number %d\n", wIndex);
retval = -EPIPE;
}
@@ -348,20 +395,16 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
* complete it!!
*/
if (vhci_hcd->resuming && time_after(jiffies, vhci_hcd->re_timeout)) {
- vhci_hcd->port_status[rhport] |=
- (1 << USB_PORT_FEAT_C_SUSPEND);
- vhci_hcd->port_status[rhport] &=
- ~(1 << USB_PORT_FEAT_SUSPEND);
+ vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_SUSPEND);
+ vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_SUSPEND);
vhci_hcd->resuming = 0;
vhci_hcd->re_timeout = 0;
}
if ((vhci_hcd->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) !=
0 && time_after(jiffies, vhci_hcd->re_timeout)) {
- vhci_hcd->port_status[rhport] |=
- (1 << USB_PORT_FEAT_C_RESET);
- vhci_hcd->port_status[rhport] &=
- ~(1 << USB_PORT_FEAT_RESET);
+ vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_RESET);
+ vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_RESET);
vhci_hcd->re_timeout = 0;
if (vhci_hcd->vdev[rhport].ud.status ==
@@ -373,6 +416,22 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
vhci_hcd->port_status[rhport] |=
USB_PORT_STAT_ENABLE;
}
+
+ if (hcd->speed < HCD_USB3) {
+ switch (vhci_hcd->vdev[rhport].speed) {
+ case USB_SPEED_HIGH:
+ vhci_hcd->port_status[rhport] |=
+ USB_PORT_STAT_HIGH_SPEED;
+ break;
+ case USB_SPEED_LOW:
+ vhci_hcd->port_status[rhport] |=
+ USB_PORT_STAT_LOW_SPEED;
+ break;
+ default:
+ pr_err("vhci_device speed not set\n");
+ break;
+ }
+ }
}
((__le16 *) buf)[0] = cpu_to_le16(vhci_hcd->port_status[rhport]);
((__le16 *) buf)[1] =
@@ -387,36 +446,119 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
break;
case SetPortFeature:
switch (wValue) {
+ case USB_PORT_FEAT_LINK_STATE:
+ usbip_dbg_vhci_rh(
+ " SetPortFeature: USB_PORT_FEAT_LINK_STATE\n");
+ if (hcd->speed != HCD_USB3) {
+ pr_err("USB_PORT_FEAT_LINK_STATE req not "
+ "supported for USB 2.0 roothub\n");
+ goto error;
+ }
+ /*
+ * Since this is dummy we don't have an actual link so
+ * there is nothing to do for the SET_LINK_STATE cmd
+ */
+ break;
+ case USB_PORT_FEAT_U1_TIMEOUT:
+ usbip_dbg_vhci_rh(
+ " SetPortFeature: USB_PORT_FEAT_U1_TIMEOUT\n");
+ case USB_PORT_FEAT_U2_TIMEOUT:
+ usbip_dbg_vhci_rh(
+ " SetPortFeature: USB_PORT_FEAT_U2_TIMEOUT\n");
+ /* TODO: add suspend/resume support! */
+ if (hcd->speed != HCD_USB3) {
+ pr_err("USB_PORT_FEAT_U1/2_TIMEOUT req not "
+ "supported for USB 2.0 roothub\n");
+ goto error;
+ }
+ break;
case USB_PORT_FEAT_SUSPEND:
usbip_dbg_vhci_rh(
" SetPortFeature: USB_PORT_FEAT_SUSPEND\n");
+ /* Applicable only for USB2.0 hub */
+ if (hcd->speed == HCD_USB3) {
+ pr_err("USB_PORT_FEAT_SUSPEND req not "
+ "supported for USB 3.0 roothub\n");
+ goto error;
+ }
+
+ vhci_hcd->port_status[rhport] |= USB_PORT_STAT_SUSPEND;
+ break;
+ case USB_PORT_FEAT_POWER:
+ usbip_dbg_vhci_rh(
+ " SetPortFeature: USB_PORT_FEAT_POWER\n");
+ if (hcd->speed == HCD_USB3)
+ vhci_hcd->port_status[rhport] |= USB_SS_PORT_STAT_POWER;
+ else
+ vhci_hcd->port_status[rhport] |= USB_PORT_STAT_POWER;
break;
+ case USB_PORT_FEAT_BH_PORT_RESET:
+ usbip_dbg_vhci_rh(
+ " SetPortFeature: USB_PORT_FEAT_BH_PORT_RESET\n");
+ /* Applicable only for USB3.0 hub */
+ if (hcd->speed != HCD_USB3) {
+ pr_err("USB_PORT_FEAT_BH_PORT_RESET req not "
+ "supported for USB 2.0 roothub\n");
+ goto error;
+ }
+ /* FALLS THROUGH */
case USB_PORT_FEAT_RESET:
usbip_dbg_vhci_rh(
" SetPortFeature: USB_PORT_FEAT_RESET\n");
- /* if it's already running, disconnect first */
- if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_ENABLE) {
- vhci_hcd->port_status[rhport] &=
- ~(USB_PORT_STAT_ENABLE |
- USB_PORT_STAT_LOW_SPEED |
- USB_PORT_STAT_HIGH_SPEED);
- /* FIXME test that code path! */
+ /* if it's already enabled, disable */
+ if (hcd->speed == HCD_USB3) {
+ vhci_hcd->port_status[rhport] = 0;
+ vhci_hcd->port_status[rhport] =
+ (USB_SS_PORT_STAT_POWER |
+ USB_PORT_STAT_CONNECTION |
+ USB_PORT_STAT_RESET);
+ } else if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_ENABLE) {
+ vhci_hcd->port_status[rhport] &= ~(USB_PORT_STAT_ENABLE
+ | USB_PORT_STAT_LOW_SPEED
+ | USB_PORT_STAT_HIGH_SPEED);
}
+
/* 50msec reset signaling */
vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
- /* FALLTHROUGH */
+ /* FALLS THROUGH */
default:
usbip_dbg_vhci_rh(" SetPortFeature: default %d\n",
wValue);
- vhci_hcd->port_status[rhport] |= (1 << wValue);
- break;
+ if (hcd->speed == HCD_USB3) {
+ if ((vhci_hcd->port_status[rhport] &
+ USB_SS_PORT_STAT_POWER) != 0) {
+ vhci_hcd->port_status[rhport] |= (1 << wValue);
+ }
+ } else
+ if ((vhci_hcd->port_status[rhport] &
+ USB_PORT_STAT_POWER) != 0) {
+ vhci_hcd->port_status[rhport] |= (1 << wValue);
+ }
+ }
+ break;
+ case GetPortErrorCount:
+ usbip_dbg_vhci_rh(" GetPortErrorCount\n");
+ if (hcd->speed != HCD_USB3) {
+ pr_err("GetPortErrorCount req not "
+ "supported for USB 2.0 roothub\n");
+ goto error;
+ }
+ /* We'll always return 0 since this is a dummy hub */
+ *(__le32 *) buf = cpu_to_le32(0);
+ break;
+ case SetHubDepth:
+ usbip_dbg_vhci_rh(" SetHubDepth\n");
+ if (hcd->speed != HCD_USB3) {
+ pr_err("SetHubDepth req not supported for "
+ "USB 2.0 roothub\n");
+ goto error;
}
break;
-
default:
- pr_err("default: no such request\n");
-
+ pr_err("default hub control req: %04x v%04x i%04x l%d\n",
+ typeReq, wValue, wIndex, wLength);
+error:
/* "protocol stall" on error */
retval = -EPIPE;
}
@@ -433,6 +575,9 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
spin_unlock_irqrestore(&vhci->lock, flags);
+ if ((vhci_hcd->port_status[rhport] & PORT_C_MASK) != 0)
+ usb_hcd_poll_rh_status(hcd);
+
return retval;
}
@@ -471,8 +616,7 @@ static void vhci_tx_urb(struct urb *urb, struct vhci_device *vdev)
spin_unlock_irqrestore(&vdev->priv_lock, flags);
}
-static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
- gfp_t mem_flags)
+static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
{
struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
struct vhci *vhci = vhci_hcd->vhci;
@@ -850,7 +994,6 @@ static void vhci_shutdown_connection(struct usbip_device *ud)
pr_info("disconnect device\n");
}
-
static void vhci_device_reset(struct usbip_device *ud)
{
struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
@@ -926,12 +1069,22 @@ static int vhci_setup(struct usb_hcd *hcd)
{
struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller));
hcd->self.sg_tablesize = ~0;
-
- vhci->vhci_hcd_hs = hcd_to_vhci_hcd(hcd);
- vhci->vhci_hcd_hs->vhci = vhci;
- hcd->speed = HCD_USB2;
- hcd->self.root_hub->speed = USB_SPEED_HIGH;
-
+ if (usb_hcd_is_primary_hcd(hcd)) {
+ vhci->vhci_hcd_hs = hcd_to_vhci_hcd(hcd);
+ vhci->vhci_hcd_hs->vhci = vhci;
+ /*
+ * Mark the first roothub as being USB 2.0.
+ * The USB 3.0 roothub will be registered later by
+ * vhci_hcd_probe()
+ */
+ hcd->speed = HCD_USB2;
+ hcd->self.root_hub->speed = USB_SPEED_HIGH;
+ } else {
+ vhci->vhci_hcd_ss = hcd_to_vhci_hcd(hcd);
+ vhci->vhci_hcd_ss->vhci = vhci;
+ hcd->speed = HCD_USB3;
+ hcd->self.root_hub->speed = USB_SPEED_SUPER;
+ }
return 0;
}
@@ -943,7 +1096,8 @@ static int vhci_start(struct usb_hcd *hcd)
usbip_dbg_vhci_hc("enter vhci_start\n");
- spin_lock_init(&vhci_hcd->vhci->lock);
+ if (usb_hcd_is_primary_hcd(hcd))
+ spin_lock_init(&vhci_hcd->vhci->lock);
/* initialize private data of usb_hcd */
@@ -970,7 +1124,7 @@ static int vhci_start(struct usb_hcd *hcd)
}
/* vhci_hcd is now ready to be controlled through sysfs */
- if (id == 0) {
+ if (id == 0 && usb_hcd_is_primary_hcd(hcd)) {
err = vhci_init_attr_group();
if (err) {
pr_err("init attr group\n");
@@ -997,7 +1151,7 @@ static void vhci_stop(struct usb_hcd *hcd)
/* 1. remove the userland interface of vhci_hcd */
id = hcd_name_to_id(hcd_name(hcd));
- if (id == 0) {
+ if (id == 0 && usb_hcd_is_primary_hcd(hcd)) {
sysfs_remove_group(&hcd_dev(hcd)->kobj, &vhci_attr_group);
vhci_finish_attr_group();
}
@@ -1058,12 +1212,30 @@ static int vhci_bus_resume(struct usb_hcd *hcd)
#define vhci_bus_resume NULL
#endif
+/* Change a group of bulk endpoints to support multiple stream IDs */
+static int vhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ unsigned int num_streams, gfp_t mem_flags)
+{
+ dev_dbg(&hcd->self.root_hub->dev, "vhci_alloc_streams not implemented\n");
+ return 0;
+}
+
+/* Reverts a group of bulk endpoints back to not using stream IDs. */
+static int vhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ gfp_t mem_flags)
+{
+ dev_dbg(&hcd->self.root_hub->dev, "vhci_free_streams not implemented\n");
+ return 0;
+}
+
static struct hc_driver vhci_hc_driver = {
.description = driver_name,
.product_desc = driver_desc,
.hcd_priv_size = sizeof(struct vhci_hcd),
- .flags = HCD_USB2,
+ .flags = HCD_USB3 | HCD_SHARED,
.reset = vhci_setup,
.start = vhci_start,
@@ -1078,12 +1250,16 @@ static struct hc_driver vhci_hc_driver = {
.hub_control = vhci_hub_control,
.bus_suspend = vhci_bus_suspend,
.bus_resume = vhci_bus_resume,
+
+ .alloc_streams = vhci_alloc_streams,
+ .free_streams = vhci_free_streams,
};
static int vhci_hcd_probe(struct platform_device *pdev)
{
struct vhci *vhci;
struct usb_hcd *hcd_hs;
+ struct usb_hcd *hcd_ss;
int ret;
usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id);
@@ -1094,7 +1270,7 @@ static int vhci_hcd_probe(struct platform_device *pdev)
*/
hcd_hs = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd_hs) {
- pr_err("create hcd failed\n");
+ pr_err("create primary hcd failed\n");
return -ENOMEM;
}
hcd_hs->has_tt = 1;
@@ -1109,12 +1285,31 @@ static int vhci_hcd_probe(struct platform_device *pdev)
goto put_usb2_hcd;
}
+ hcd_ss = usb_create_shared_hcd(&vhci_hc_driver, &pdev->dev,
+ dev_name(&pdev->dev), hcd_hs);
+ if (!hcd_ss) {
+ ret = -ENOMEM;
+ pr_err("create shared hcd failed\n");
+ goto remove_usb2_hcd;
+ }
+
+ ret = usb_add_hcd(hcd_ss, 0, 0);
+ if (ret) {
+ pr_err("usb_add_hcd ss failed %d\n", ret);
+ goto put_usb3_hcd;
+ }
+
usbip_dbg_vhci_hc("bye\n");
return 0;
+put_usb3_hcd:
+ usb_put_hcd(hcd_ss);
+remove_usb2_hcd:
+ usb_remove_hcd(hcd_hs);
put_usb2_hcd:
usb_put_hcd(hcd_hs);
vhci->vhci_hcd_hs = NULL;
+ vhci->vhci_hcd_ss = NULL;
return ret;
}
@@ -1127,10 +1322,14 @@ static int vhci_hcd_remove(struct platform_device *pdev)
* then reverses the effects of usb_add_hcd(),
* invoking the HCD's stop() methods.
*/
+ usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss));
+ usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss));
+
usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs));
usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs));
vhci->vhci_hcd_hs = NULL;
+ vhci->vhci_hcd_ss = NULL;
return 0;
}
@@ -1142,7 +1341,7 @@ static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state)
{
struct usb_hcd *hcd;
struct vhci *vhci;
- int rhport = 0;
+ int rhport;
int connected = 0;
int ret = 0;
unsigned long flags;
@@ -1161,6 +1360,10 @@ static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state)
if (vhci->vhci_hcd_hs->port_status[rhport] &
USB_PORT_STAT_CONNECTION)
connected += 1;
+
+ if (vhci->vhci_hcd_ss->port_status[rhport] &
+ USB_PORT_STAT_CONNECTION)
+ connected += 1;
}
spin_unlock_irqrestore(&vhci->lock, flags);
diff --git a/drivers/usb/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c
index 63e10a4ffeec..cac2319df742 100644
--- a/drivers/usb/usbip/vhci_sysfs.c
+++ b/drivers/usb/usbip/vhci_sysfs.c
@@ -29,6 +29,42 @@
/* TODO: refine locking ?*/
+/*
+ * output example:
+ * hub port sta spd dev socket local_busid
+ * hs 0000 004 000 00000000 c5a7bb80 1-2.3
+ * ................................................
+ * ss 0008 004 000 00000000 d8cee980 2-3.4
+ * ................................................
+ *
+ * IP address can be retrieved from a socket pointer address by looking
+ * up /proc/net/{tcp,tcp6}. Also, a userland program may remember a
+ * port number and its peer IP address.
+ */
+static void port_show_vhci(char **out, int hub, int port, struct vhci_device *vdev)
+{
+ if (hub == HUB_SPEED_HIGH)
+ *out += sprintf(*out, "hs %04u %03u ",
+ port, vdev->ud.status);
+ else /* hub == HUB_SPEED_SUPER */
+ *out += sprintf(*out, "ss %04u %03u ",
+ port, vdev->ud.status);
+
+ if (vdev->ud.status == VDEV_ST_USED) {
+ *out += sprintf(*out, "%03u %08x ",
+ vdev->speed, vdev->devid);
+ *out += sprintf(*out, "%16p %s",
+ vdev->ud.tcp_socket,
+ dev_name(&vdev->udev->dev));
+
+ } else {
+ *out += sprintf(*out, "000 00000000 ");
+ *out += sprintf(*out, "0000000000000000 0-0");
+ }
+
+ *out += sprintf(*out, "\n");
+}
+
/* Sysfs entry to show port status */
static ssize_t status_show_vhci(int pdev_nr, char *out)
{
@@ -51,37 +87,21 @@ static ssize_t status_show_vhci(int pdev_nr, char *out)
spin_lock_irqsave(&vhci->lock, flags);
- /*
- * output example:
- * port sta spd dev socket local_busid
- * 0000 004 000 00000000 c5a7bb80 1-2.3
- * 0001 004 000 00000000 d8cee980 2-3.4
- *
- * IP address can be retrieved from a socket pointer address by looking
- * up /proc/net/{tcp,tcp6}. Also, a userland program may remember a
- * port number and its peer IP address.
- */
for (i = 0; i < VHCI_HC_PORTS; i++) {
- struct vhci_device *vdev = &vhci_hcd->vdev[i];
+ struct vhci_device *vdev = &vhci->vhci_hcd_hs->vdev[i];
spin_lock(&vdev->ud.lock);
- out += sprintf(out, "%04u %03u ",
- (pdev_nr * VHCI_HC_PORTS) + i,
- vdev->ud.status);
-
- if (vdev->ud.status == VDEV_ST_USED) {
- out += sprintf(out, "%03u %08x ",
- vdev->speed, vdev->devid);
- out += sprintf(out, "%16p %s",
- vdev->ud.tcp_socket,
- dev_name(&vdev->udev->dev));
-
- } else {
- out += sprintf(out, "000 00000000 ");
- out += sprintf(out, "0000000000000000 0-0");
- }
+ port_show_vhci(&out, HUB_SPEED_HIGH,
+ pdev_nr * VHCI_HC_PORTS * 2 + i, vdev);
+ spin_unlock(&vdev->ud.lock);
+ }
- out += sprintf(out, "\n");
+ for (i = 0; i < VHCI_HC_PORTS; i++) {
+ struct vhci_device *vdev = &vhci->vhci_hcd_ss->vdev[i];
+
+ spin_lock(&vdev->ud.lock);
+ port_show_vhci(&out, HUB_SPEED_SUPER,
+ pdev_nr * VHCI_HC_PORTS * 2 + VHCI_HC_PORTS + i, vdev);
spin_unlock(&vdev->ud.lock);
}
@@ -96,8 +116,16 @@ static ssize_t status_show_not_ready(int pdev_nr, char *out)
int i = 0;
for (i = 0; i < VHCI_HC_PORTS; i++) {
- out += sprintf(out, "%04u %03u ",
- (pdev_nr * VHCI_HC_PORTS) + i,
+ out += sprintf(out, "hs %04u %03u ",
+ (pdev_nr * VHCI_HC_PORTS * 2) + i,
+ VDEV_ST_NOTASSIGNED);
+ out += sprintf(out, "000 00000000 0000000000000000 0-0");
+ out += sprintf(out, "\n");
+ }
+
+ for (i = 0; i < VHCI_HC_PORTS; i++) {
+ out += sprintf(out, "ss %04u %03u ",
+ (pdev_nr * VHCI_HC_PORTS * 2) + VHCI_HC_PORTS + i,
VDEV_ST_NOTASSIGNED);
out += sprintf(out, "000 00000000 0000000000000000 0-0");
out += sprintf(out, "\n");
@@ -129,7 +157,7 @@ static ssize_t status_show(struct device *dev,
int pdev_nr;
out += sprintf(out,
- "port sta spd dev socket local_busid\n");
+ "hub port sta spd dev socket local_busid\n");
pdev_nr = status_name_to_id(attr->attr.name);
if (pdev_nr < 0)
@@ -145,7 +173,10 @@ static ssize_t nports_show(struct device *dev, struct device_attribute *attr,
{
char *s = out;
- out += sprintf(out, "%d\n", VHCI_HC_PORTS * vhci_num_controllers);
+ /*
+ * Half the ports are for SPEED_HIGH and half for SPEED_SUPER, thus the * 2.
+ */
+ out += sprintf(out, "%d\n", VHCI_HC_PORTS * vhci_num_controllers * 2);
return out - s;
}
static DEVICE_ATTR_RO(nports);
@@ -200,6 +231,7 @@ static ssize_t store_detach(struct device *dev, struct device_attribute *attr,
{
__u32 port = 0, pdev_nr = 0, rhport = 0;
struct usb_hcd *hcd;
+ struct vhci_hcd *vhci_hcd;
int ret;
if (kstrtoint(buf, 10, &port) < 0)
@@ -217,7 +249,14 @@ static ssize_t store_detach(struct device *dev, struct device_attribute *attr,
return -EAGAIN;
}
- ret = vhci_port_disconnect(hcd_to_vhci_hcd(hcd), rhport);
+ usbip_dbg_vhci_sysfs("rhport %d\n", rhport);
+
+ if ((port / VHCI_HC_PORTS) % 2)
+ vhci_hcd = hcd_to_vhci_hcd(hcd)->vhci->vhci_hcd_ss;
+ else
+ vhci_hcd = hcd_to_vhci_hcd(hcd)->vhci->vhci_hcd_hs;
+
+ ret = vhci_port_disconnect(vhci_hcd, rhport);
if (ret < 0)
return -EINVAL;
@@ -301,7 +340,11 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
vhci_hcd = hcd_to_vhci_hcd(hcd);
vhci = vhci_hcd->vhci;
- vdev = &vhci_hcd->vdev[rhport];
+
+ if (speed == USB_SPEED_SUPER)
+ vdev = &vhci->vhci_hcd_ss->vdev[rhport];
+ else
+ vdev = &vhci->vhci_hcd_hs->vdev[rhport];
/* Extract socket from fd. */
socket = sockfd_lookup(sockfd, &err);
diff --git a/tools/usb/usbip/libsrc/vhci_driver.c b/tools/usb/usbip/libsrc/vhci_driver.c
index 3d8189b4f539..9bd2cd71645d 100644
--- a/tools/usb/usbip/libsrc/vhci_driver.c
+++ b/tools/usb/usbip/libsrc/vhci_driver.c
@@ -52,9 +52,10 @@ static int parse_status(const char *value)
unsigned long socket;
char lbusid[SYSFS_BUS_ID_SIZE];
struct usbip_imported_device *idev;
+ char hub[3];
- ret = sscanf(c, "%d %d %d %x %lx %31s\n",
- &port, &status, &speed,
+ ret = sscanf(c, "%2s %d %d %d %x %lx %31s\n",
+ hub, &port, &status, &speed,
&devid, &socket, lbusid);
if (ret < 5) {
@@ -62,15 +63,19 @@ static int parse_status(const char *value)
BUG();
}
- dbg("port %d status %d speed %d devid %x",
- port, status, speed, devid);
+ dbg("hub %s port %d status %d speed %d devid %x",
+ hub, port, status, speed, devid);
dbg("socket %lx lbusid %s", socket, lbusid);
/* if a device is connected, look at it */
idev = &vhci_driver->idev[port];
-
memset(idev, 0, sizeof(*idev));
+ if (strncmp("hs", hub, 2) == 0)
+ idev->hub = HUB_SPEED_HIGH;
+ else /* strncmp("ss", hub, 2) == 0 */
+ idev->hub = HUB_SPEED_SUPER;
+
idev->port = port;
idev->status = status;
@@ -320,11 +325,15 @@ err:
}
-int usbip_vhci_get_free_port(void)
+int usbip_vhci_get_free_port(uint32_t speed)
{
for (int i = 0; i < vhci_driver->nports; i++) {
+ if (speed == USB_SPEED_SUPER &&
+ vhci_driver->idev[i].hub != HUB_SPEED_SUPER)
+ continue;
+
if (vhci_driver->idev[i].status == VDEV_ST_NULL)
- return i;
+ return vhci_driver->idev[i].port;
}
return -1;
diff --git a/tools/usb/usbip/libsrc/vhci_driver.h b/tools/usb/usbip/libsrc/vhci_driver.h
index dfe19c1c0245..4898d3bafb10 100644
--- a/tools/usb/usbip/libsrc/vhci_driver.h
+++ b/tools/usb/usbip/libsrc/vhci_driver.h
@@ -14,7 +14,13 @@
#define USBIP_VHCI_DEVICE_NAME "vhci_hcd.0"
#define MAXNPORT 128
+enum hub_speed {
+ HUB_SPEED_HIGH = 0,
+ HUB_SPEED_SUPER,
+};
+
struct usbip_imported_device {
+ enum hub_speed hub;
uint8_t port;
uint32_t status;
@@ -46,7 +52,7 @@ void usbip_vhci_driver_close(void);
int usbip_vhci_refresh_device_list(void);
-int usbip_vhci_get_free_port(void);
+int usbip_vhci_get_free_port(uint32_t speed);
int usbip_vhci_attach_device2(uint8_t port, int sockfd, uint32_t devid,
uint32_t speed);
diff --git a/tools/usb/usbip/src/usbip_attach.c b/tools/usb/usbip/src/usbip_attach.c
index 62a297ff647a..6e89768ffe30 100644
--- a/tools/usb/usbip/src/usbip_attach.c
+++ b/tools/usb/usbip/src/usbip_attach.c
@@ -94,6 +94,7 @@ static int import_device(int sockfd, struct usbip_usb_device *udev)
{
int rc;
int port;
+ uint32_t speed = udev->speed;
rc = usbip_vhci_driver_open();
if (rc < 0) {
@@ -101,7 +102,7 @@ static int import_device(int sockfd, struct usbip_usb_device *udev)
return -1;
}
- port = usbip_vhci_get_free_port();
+ port = usbip_vhci_get_free_port(speed);
if (port < 0) {
err("no free port");
usbip_vhci_driver_close();