diff options
90 files changed, 4605 insertions, 699 deletions
diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt new file mode 100644 index 000000000000..c907aa8dd755 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt @@ -0,0 +1,28 @@ +Broadcom V3D GPU + +Only the Broadcom V3D 3.x and newer GPUs are covered by this binding. +For V3D 2.x, see brcm,bcm-vc4.txt. + +Required properties: +- compatible: Should be "brcm,7268-v3d" or "brcm,7278-v3d" +- reg: Physical base addresses and lengths of the register areas +- reg-names: Names for the register areas. The "hub", "bridge", and "core0" + register areas are always required. The "gca" register area + is required if the GCA cache controller is present. +- interrupts: The interrupt numbers. The first interrupt is for the hub, + while the following interrupts are for the cores. + See bindings/interrupt-controller/interrupts.txt + +Optional properties: +- clocks: The core clock the unit runs on + +v3d { + compatible = "brcm,7268-v3d"; + reg = <0xf1204000 0x100>, + <0xf1200000 0x4000>, + <0xf1208000 0x4000>, + <0xf1204100 0x100>; + reg-names = "bridge", "hub", "core0", "gca"; + interrupts = <0 78 4>, + <0 77 4>; +}; diff --git a/Documentation/gpu/drivers.rst b/Documentation/gpu/drivers.rst index d3ab6abae838..f982558fc25d 100644 --- a/Documentation/gpu/drivers.rst +++ b/Documentation/gpu/drivers.rst @@ -10,6 +10,7 @@ GPU Driver Documentation tegra tinydrm tve200 + v3d vc4 bridge/dw-hdmi xen-front diff --git a/MAINTAINERS b/MAINTAINERS index ac1215a5561e..ec7b1d890bf6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4786,6 +4786,14 @@ S: Maintained F: drivers/gpu/drm/omapdrm/ F: Documentation/devicetree/bindings/display/ti/ +DRM DRIVERS FOR V3D +M: Eric Anholt <eric@anholt.net> +S: Supported +F: drivers/gpu/drm/v3d/ +F: include/uapi/drm/v3d_drm.h +F: Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt +T: git git://anongit.freedesktop.org/drm/drm-misc + DRM DRIVERS FOR VC4 M: Eric Anholt <eric@anholt.net> T: git git://github.com/anholt/linux diff --git a/drivers/dma-buf/sync_debug.h b/drivers/dma-buf/sync_debug.h index d615a89f774c..05e33f937ad0 100644 --- a/drivers/dma-buf/sync_debug.h +++ b/drivers/dma-buf/sync_debug.h @@ -62,8 +62,6 @@ struct sync_pt { struct rb_node node; }; -#ifdef CONFIG_SW_SYNC - extern const struct file_operations sw_sync_debugfs_fops; void sync_timeline_debug_add(struct sync_timeline *obj); @@ -72,12 +70,4 @@ void sync_file_debug_add(struct sync_file *fence); void sync_file_debug_remove(struct sync_file *fence); void sync_dump(void); -#else -# define sync_timeline_debug_add(obj) -# define sync_timeline_debug_remove(obj) -# define sync_file_debug_add(fence) -# define sync_file_debug_remove(fence) -# define sync_dump() -#endif - #endif /* _LINUX_SYNC_H */ diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 757825ac60df..2a72d2feb76d 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -49,16 +49,17 @@ config DRM_DEBUG_MM If in doubt, say "N". -config DRM_DEBUG_MM_SELFTEST - tristate "kselftests for DRM range manager (struct drm_mm)" +config DRM_DEBUG_SELFTEST + tristate "kselftests for DRM" depends on DRM depends on DEBUG_KERNEL select PRIME_NUMBERS select DRM_LIB_RANDOM + select DRM_KMS_HELPER default n help - This option provides a kernel module that can be used to test - the DRM range manager (drm_mm) and its API. This option is not + This option provides kernel modules that can be used to run + various selftests on parts of the DRM api. This option is not useful for distributions or general kernels, but only for kernel developers working on DRM and associated drivers. @@ -267,6 +268,8 @@ source "drivers/gpu/drm/amd/amdkfd/Kconfig" source "drivers/gpu/drm/imx/Kconfig" +source "drivers/gpu/drm/v3d/Kconfig" + source "drivers/gpu/drm/vc4/Kconfig" source "drivers/gpu/drm/etnaviv/Kconfig" diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 9d66657ea117..ef9f3dab287f 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -43,7 +43,7 @@ drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o drm_kms_helper-$(CONFIG_DRM_DP_AUX_CHARDEV) += drm_dp_aux_dev.o obj-$(CONFIG_DRM_KMS_HELPER) += drm_kms_helper.o -obj-$(CONFIG_DRM_DEBUG_MM_SELFTEST) += selftests/ +obj-$(CONFIG_DRM_DEBUG_SELFTEST) += selftests/ obj-$(CONFIG_DRM) += drm.o obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o @@ -61,6 +61,7 @@ obj-$(CONFIG_DRM_MGA) += mga/ obj-$(CONFIG_DRM_I810) += i810/ obj-$(CONFIG_DRM_I915) += i915/ obj-$(CONFIG_DRM_MGAG200) += mgag200/ +obj-$(CONFIG_DRM_V3D) += v3d/ obj-$(CONFIG_DRM_VC4) += vc4/ obj-$(CONFIG_DRM_CIRRUS_QEMU) += cirrus/ obj-$(CONFIG_DRM_SIS) += sis/ diff --git a/drivers/gpu/drm/bridge/adv7511/Kconfig b/drivers/gpu/drm/bridge/adv7511/Kconfig index 592b9d2ec034..944e440c4fde 100644 --- a/drivers/gpu/drm/bridge/adv7511/Kconfig +++ b/drivers/gpu/drm/bridge/adv7511/Kconfig @@ -1,5 +1,5 @@ config DRM_I2C_ADV7511 - tristate "AV7511 encoder" + tristate "ADV7511 encoder" depends on OF select DRM_KMS_HELPER select REGMAP_I2C diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 2614cea538e2..73021b388e12 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -1127,7 +1127,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id) } if (adv7511->gpio_pd) { - mdelay(5); + usleep_range(5000, 6000); gpiod_set_value_cansleep(adv7511->gpio_pd, 0); } diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index 9bdd67781917..dc850b4b6e21 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -1425,7 +1425,9 @@ drm_atomic_set_crtc_for_plane(struct drm_plane_state *plane_state, { struct drm_plane *plane = plane_state->plane; struct drm_crtc_state *crtc_state; - + /* Nothing to do for same crtc*/ + if (plane_state->crtc == crtc) + return 0; if (plane_state->crtc) { crtc_state = drm_atomic_get_crtc_state(plane_state->state, plane_state->crtc); diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 9cb2209f6fc8..130da5195f3b 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -766,7 +766,7 @@ int drm_atomic_helper_check_plane_state(struct drm_plane_state *plane_state, if (crtc_state->enable) drm_mode_get_hv_timing(&crtc_state->mode, &clip.x2, &clip.y2); - plane_state->visible = drm_rect_clip_scaled(src, dst, &clip, hscale, vscale); + plane_state->visible = drm_rect_clip_scaled(src, dst, &clip); drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16, rotation); diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index b3cde897cd80..9b9ba5d5ec0c 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -1069,7 +1069,7 @@ int drm_mode_create_tv_properties(struct drm_device *dev, goto nomem; for (i = 0; i < num_modes; i++) - drm_property_add_enum(dev->mode_config.tv_mode_property, i, + drm_property_add_enum(dev->mode_config.tv_mode_property, i, modes[i]); dev->mode_config.tv_brightness_property = @@ -1156,7 +1156,7 @@ int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, { struct drm_device *dev = connector->dev; struct drm_property *scaling_mode_property; - int i, j = 0; + int i; const unsigned valid_scaling_mode_mask = (1U << ARRAY_SIZE(drm_scaling_mode_enum_list)) - 1; @@ -1177,7 +1177,7 @@ int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, if (!(BIT(i) & scaling_mode_mask)) continue; - ret = drm_property_add_enum(scaling_mode_property, j++, + ret = drm_property_add_enum(scaling_mode_property, drm_scaling_mode_enum_list[i].type, drm_scaling_mode_enum_list[i].name); @@ -1531,8 +1531,10 @@ static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *conne return connector->encoder; } -static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode, - const struct drm_file *file_priv) +static bool +drm_mode_expose_to_userspace(const struct drm_display_mode *mode, + const struct list_head *export_list, + const struct drm_file *file_priv) { /* * If user-space hasn't configured the driver to expose the stereo 3D @@ -1540,6 +1542,23 @@ static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode, */ if (!file_priv->stereo_allowed && drm_mode_is_stereo(mode)) return false; + /* + * If user-space hasn't configured the driver to expose the modes + * with aspect-ratio, don't expose them. However if such a mode + * is unique, let it be exposed, but reset the aspect-ratio flags + * while preparing the list of user-modes. + */ + if (!file_priv->aspect_ratio_allowed) { + struct drm_display_mode *mode_itr; + + list_for_each_entry(mode_itr, export_list, export_head) + if (drm_mode_match(mode_itr, mode, + DRM_MODE_MATCH_TIMINGS | + DRM_MODE_MATCH_CLOCK | + DRM_MODE_MATCH_FLAGS | + DRM_MODE_MATCH_3D_FLAGS)) + return false; + } return true; } @@ -1559,6 +1578,7 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, struct drm_mode_modeinfo u_mode; struct drm_mode_modeinfo __user *mode_ptr; uint32_t __user *encoder_ptr; + LIST_HEAD(export_list); if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EINVAL; @@ -1607,21 +1627,31 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, /* delayed so we get modes regardless of pre-fill_modes state */ list_for_each_entry(mode, &connector->modes, head) - if (drm_mode_expose_to_userspace(mode, file_priv)) + if (drm_mode_expose_to_userspace(mode, &export_list, + file_priv)) { + list_add_tail(&mode->export_head, &export_list); mode_count++; + } /* * This ioctl is called twice, once to determine how much space is * needed, and the 2nd time to fill it. + * The modes that need to be exposed to the user are maintained in the + * 'export_list'. When the ioctl is called first time to determine the, + * space, the export_list gets filled, to find the no.of modes. In the + * 2nd time, the user modes are filled, one by one from the export_list. */ if ((out_resp->count_modes >= mode_count) && mode_count) { copied = 0; mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr; - list_for_each_entry(mode, &connector->modes, head) { - if (!drm_mode_expose_to_userspace(mode, file_priv)) - continue; - + list_for_each_entry(mode, &export_list, export_head) { drm_mode_convert_to_umode(&u_mode, mode); + /* + * Reset aspect ratio flags of user-mode, if modes with + * aspect-ratio are not supported. + */ + if (!file_priv->aspect_ratio_allowed) + u_mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK; if (copy_to_user(mode_ptr + copied, &u_mode, sizeof(u_mode))) { ret = -EFAULT; diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index a231dd5dce16..98a36e6c69ad 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -449,6 +449,8 @@ int drm_mode_getcrtc(struct drm_device *dev, crtc_resp->mode_valid = 0; } } + if (!file_priv->aspect_ratio_allowed) + crtc_resp->mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK; drm_modeset_unlock(&crtc->mutex); return 0; @@ -628,6 +630,13 @@ retry: ret = -ENOMEM; goto out; } + if (!file_priv->aspect_ratio_allowed && + (crtc_req->mode.flags & DRM_MODE_FLAG_PIC_AR_MASK) != DRM_MODE_FLAG_PIC_AR_NONE) { + DRM_DEBUG_KMS("Unexpected aspect-ratio flag bits\n"); + ret = -EINVAL; + goto out; + } + ret = drm_mode_convert_umode(dev, mode, &crtc_req->mode); if (ret) { diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index ffe14ec3e7f2..36c7609a4bd5 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -119,18 +119,32 @@ u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SI EXPORT_SYMBOL(drm_dp_get_adjust_request_pre_emphasis); void drm_dp_link_train_clock_recovery_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) { - if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0) + int rd_interval = dpcd[DP_TRAINING_AUX_RD_INTERVAL] & + DP_TRAINING_AUX_RD_MASK; + + if (rd_interval > 4) + DRM_DEBUG_KMS("AUX interval %d, out of range (max 4)\n", + rd_interval); + + if (rd_interval == 0 || dpcd[DP_DPCD_REV] >= DP_DPCD_REV_14) udelay(100); else - mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4); + mdelay(rd_interval * 4); } EXPORT_SYMBOL(drm_dp_link_train_clock_recovery_delay); void drm_dp_link_train_channel_eq_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) { - if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0) + int rd_interval = dpcd[DP_TRAINING_AUX_RD_INTERVAL] & + DP_TRAINING_AUX_RD_MASK; + + if (rd_interval > 4) + DRM_DEBUG_KMS("AUX interval %d, out of range (max 4)\n", + rd_interval); + + if (rd_interval == 0) udelay(400); else - mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4); + mdelay(rd_interval * 4); } EXPORT_SYMBOL(drm_dp_link_train_channel_eq_delay); diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 32a83b41ab61..f6910ebe4d0e 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -99,8 +99,6 @@ static struct drm_minor **drm_minor_get_slot(struct drm_device *dev, return &dev->primary; case DRM_MINOR_RENDER: return &dev->render; - case DRM_MINOR_CONTROL: - return &dev->control; default: BUG(); } @@ -567,7 +565,6 @@ err_ctxbitmap: err_minors: drm_minor_free(dev, DRM_MINOR_PRIMARY); drm_minor_free(dev, DRM_MINOR_RENDER); - drm_minor_free(dev, DRM_MINOR_CONTROL); drm_fs_inode_free(dev->anon_inode); err_free: mutex_destroy(&dev->master_mutex); @@ -603,7 +600,6 @@ void drm_dev_fini(struct drm_device *dev) drm_minor_free(dev, DRM_MINOR_PRIMARY); drm_minor_free(dev, DRM_MINOR_RENDER); - drm_minor_free(dev, DRM_MINOR_CONTROL); mutex_destroy(&dev->master_mutex); mutex_destroy(&dev->ctxlist_mutex); @@ -796,10 +792,6 @@ int drm_dev_register(struct drm_device *dev, unsigned long flags) mutex_lock(&drm_global_mutex); - ret = drm_minor_register(dev, DRM_MINOR_CONTROL); - if (ret) - goto err_minors; - ret = drm_minor_register(dev, DRM_MINOR_RENDER); if (ret) goto err_minors; @@ -837,7 +829,6 @@ err_minors: remove_compat_control_link(dev); drm_minor_unregister(dev, DRM_MINOR_PRIMARY); drm_minor_unregister(dev, DRM_MINOR_RENDER); - drm_minor_unregister(dev, DRM_MINOR_CONTROL); out_unlock: mutex_unlock(&drm_global_mutex); return ret; @@ -882,7 +873,6 @@ void drm_dev_unregister(struct drm_device *dev) remove_compat_control_link(dev); drm_minor_unregister(dev, DRM_MINOR_PRIMARY); drm_minor_unregister(dev, DRM_MINOR_RENDER); - drm_minor_unregister(dev, DRM_MINOR_CONTROL); } EXPORT_SYMBOL(drm_dev_unregister); diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 08d33b48b14a..40e1e24f2ff0 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -2930,11 +2930,15 @@ cea_mode_alternate_timings(u8 vic, struct drm_display_mode *mode) static u8 drm_match_cea_mode_clock_tolerance(const struct drm_display_mode *to_match, unsigned int clock_tolerance) { + unsigned int match_flags = DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_FLAGS; u8 vic; if (!to_match->clock) return 0; + if (to_match->picture_aspect_ratio) + match_flags |= DRM_MODE_MATCH_ASPECT_RATIO; + for (vic = 1; vic < ARRAY_SIZE(edid_cea_modes); vic++) { struct drm_display_mode cea_mode = edid_cea_modes[vic]; unsigned int clock1, clock2; @@ -2948,7 +2952,7 @@ static u8 drm_match_cea_mode_clock_tolerance(const struct drm_display_mode *to_m continue; do { - if (drm_mode_equal_no_clocks_no_stereo(to_match, &cea_mode)) + if (drm_mode_match(to_match, &cea_mode, match_flags)) return vic; } while (cea_mode_alternate_timings(vic, &cea_mode)); } @@ -2965,11 +2969,15 @@ static u8 drm_match_cea_mode_clock_tolerance(const struct drm_display_mode *to_m */ u8 drm_match_cea_mode(const struct drm_display_mode *to_match) { + unsigned int match_flags = DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_FLAGS; u8 vic; if (!to_match->clock) return 0; + if (to_match->picture_aspect_ratio) + match_flags |= DRM_MODE_MATCH_ASPECT_RATIO; + for (vic = 1; vic < ARRAY_SIZE(edid_cea_modes); vic++) { struct drm_display_mode cea_mode = edid_cea_modes[vic]; unsigned int clock1, clock2; @@ -2983,7 +2991,7 @@ u8 drm_match_cea_mode(const struct drm_display_mode *to_match) continue; do { - if (drm_mode_equal_no_clocks_no_stereo(to_match, &cea_mode)) + if (drm_mode_match(to_match, &cea_mode, match_flags)) return vic; } while (cea_mode_alternate_timings(vic, &cea_mode)); } @@ -3030,6 +3038,7 @@ hdmi_mode_alternate_clock(const struct drm_display_mode *hdmi_mode) static u8 drm_match_hdmi_mode_clock_tolerance(const struct drm_display_mode *to_match, unsigned int clock_tolerance) { + unsigned int match_flags = DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_FLAGS; u8 vic; if (!to_match->clock) @@ -3047,7 +3056,7 @@ static u8 drm_match_hdmi_mode_clock_tolerance(const struct drm_display_mode *to_ abs(to_match->clock - clock2) > clock_tolerance) continue; - if (drm_mode_equal_no_clocks(to_match, hdmi_mode)) + if (drm_mode_match(to_match, hdmi_mode, match_flags)) return vic; } @@ -3064,6 +3073,7 @@ static u8 drm_match_hdmi_mode_clock_tolerance(const struct drm_display_mode *to_ */ static u8 drm_match_hdmi_mode(const struct drm_display_mode *to_match) { + unsigned int match_flags = DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_FLAGS; u8 vic; if (!to_match->clock) @@ -3079,7 +3089,7 @@ static u8 drm_match_hdmi_mode(const struct drm_display_mode *to_match) if ((KHZ2PICOS(to_match->clock) == KHZ2PICOS(clock1) || KHZ2PICOS(to_match->clock) == KHZ2PICOS(clock2)) && - drm_mode_equal_no_clocks_no_stereo(to_match, hdmi_mode)) + drm_mode_match(to_match, hdmi_mode, match_flags)) return vic; } return 0; @@ -4823,6 +4833,7 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame, const struct drm_display_mode *mode, bool is_hdmi2_sink) { + enum hdmi_picture_aspect picture_aspect; int err; if (!frame || !mode) @@ -4865,13 +4876,23 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame, * Populate picture aspect ratio from either * user input (if specified) or from the CEA mode list. */ - if (mode->picture_aspect_ratio == HDMI_PICTURE_ASPECT_4_3 || - mode->picture_aspect_ratio == HDMI_PICTURE_ASPECT_16_9) - frame->picture_aspect = mode->picture_aspect_ratio; - else if (frame->video_code > 0) - frame->picture_aspect = drm_get_cea_aspect_ratio( - frame->video_code); + picture_aspect = mode->picture_aspect_ratio; + if (picture_aspect == HDMI_PICTURE_ASPECT_NONE) + picture_aspect = drm_get_cea_aspect_ratio(frame->video_code); + + /* + * The infoframe can't convey anything but none, 4:3 + * and 16:9, so if the user has asked for anything else + * we can only satisfy it by specifying the right VIC. + */ + if (picture_aspect > HDMI_PICTURE_ASPECT_16_9) { + if (picture_aspect != + drm_get_cea_aspect_ratio(frame->video_code)) + return -EINVAL; + picture_aspect = HDMI_PICTURE_ASPECT_NONE; + } + frame->picture_aspect = picture_aspect; frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE; frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN; diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 0646b108030b..2ee1eaa66188 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -2183,7 +2183,11 @@ static bool drm_target_cloned(struct drm_fb_helper *fb_helper, for (j = 0; j < i; j++) { if (!enabled[j]) continue; - if (!drm_mode_equal(modes[j], modes[i])) + if (!drm_mode_match(modes[j], modes[i], + DRM_MODE_MATCH_TIMINGS | + DRM_MODE_MATCH_CLOCK | + DRM_MODE_MATCH_FLAGS | + DRM_MODE_MATCH_3D_FLAGS)) can_clone = false; } } @@ -2203,7 +2207,11 @@ static bool drm_target_cloned(struct drm_fb_helper *fb_helper, fb_helper_conn = fb_helper->connector_info[i]; list_for_each_entry(mode, &fb_helper_conn->connector->modes, head) { - if (drm_mode_equal(mode, dmt_mode)) + if (drm_mode_match(mode, dmt_mode, + DRM_MODE_MATCH_TIMINGS | + DRM_MODE_MATCH_CLOCK | + DRM_MODE_MATCH_FLAGS | + DRM_MODE_MATCH_3D_FLAGS)) modes[i] = mode; } if (!modes[i]) diff --git a/drivers/gpu/drm/drm_framebuffer.c b/drivers/gpu/drm/drm_framebuffer.c index 8c4d32adcc17..bfedceff87bb 100644 --- a/drivers/gpu/drm/drm_framebuffer.c +++ b/drivers/gpu/drm/drm_framebuffer.c @@ -484,8 +484,7 @@ int drm_mode_getfb(struct drm_device *dev, * backwards-compatibility reasons, we cannot make GET_FB() privileged, * so just return an invalid handle for non-masters. */ - if (!drm_is_current_master(file_priv) && !capable(CAP_SYS_ADMIN) && - !drm_is_control_client(file_priv)) { + if (!drm_is_current_master(file_priv) && !capable(CAP_SYS_ADMIN)) { r->handle = 0; ret = 0; goto out; diff --git a/drivers/gpu/drm/drm_ioc32.c b/drivers/gpu/drm/drm_ioc32.c index f8e96e648acf..67b1fca39aa6 100644 --- a/drivers/gpu/drm/drm_ioc32.c +++ b/drivers/gpu/drm/drm_ioc32.c @@ -105,7 +105,7 @@ static int compat_drm_version(struct file *file, unsigned int cmd, .desc = compat_ptr(v32.desc), }; err = drm_ioctl_kernel(file, drm_version, &v, - DRM_UNLOCKED|DRM_RENDER_ALLOW|DRM_CONTROL_ALLOW); + DRM_UNLOCKED|DRM_RENDER_ALLOW); if (err) return err; @@ -885,7 +885,7 @@ static int compat_drm_mode_addfb2(struct file *file, unsigned int cmd, return -EFAULT; err = drm_ioctl_kernel(file, drm_mode_addfb2, &req64, - DRM_CONTROL_ALLOW|DRM_UNLOCKED); + DRM_UNLOCKED); if (err) return err; diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c index af782911c505..0d4cfb232576 100644 --- a/drivers/gpu/drm/drm_ioctl.c +++ b/drivers/gpu/drm/drm_ioctl.c @@ -324,6 +324,15 @@ drm_setclientcap(struct drm_device *dev, void *data, struct drm_file *file_priv) return -EINVAL; file_priv->atomic = req->value; file_priv->universal_planes = req->value; + /* + * No atomic user-space blows up on aspect ratio mode bits. + */ + file_priv->aspect_ratio_allowed = req->value; + break; + case DRM_CLIENT_CAP_ASPECT_RATIO: + if (req->value > 1) + return -EINVAL; + file_priv->aspect_ratio_allowed = req->value; break; default: return -EINVAL; @@ -510,13 +519,7 @@ int drm_ioctl_permit(u32 flags, struct drm_file *file_priv) /* MASTER is only for master or control clients */ if (unlikely((flags & DRM_MASTER) && - !drm_is_current_master(file_priv) && - !drm_is_control_client(file_priv))) - return -EACCES; - - /* Control clients must be explicitly allowed */ - if (unlikely(!(flags & DRM_CONTROL_ALLOW) && - drm_is_control_client(file_priv))) + !drm_is_current_master(file_priv))) return -EACCES; /* Render clients must be explicitly allowed */ @@ -539,7 +542,7 @@ EXPORT_SYMBOL(drm_ioctl_permit); /* Ioctl table */ static const struct drm_ioctl_desc drm_ioctls[] = { DRM_IOCTL_DEF(DRM_IOCTL_VERSION, drm_version, - DRM_UNLOCKED|DRM_RENDER_ALLOW|DRM_CONTROL_ALLOW), + DRM_UNLOCKED|DRM_RENDER_ALLOW), DRM_IOCTL_DEF(DRM_IOCTL_GET_UNIQUE, drm_getunique, DRM_UNLOCKED), DRM_IOCTL_DEF(DRM_IOCTL_GET_MAGIC, drm_getmagic, DRM_UNLOCKED), DRM_IOCTL_DEF(DRM_IOCTL_IRQ_BUSID, drm_irq_by_busid, DRM_MASTER|DRM_ROOT_ONLY), @@ -613,41 +616,41 @@ static const struct drm_ioctl_desc drm_ioctls[] = { DRM_IOCTL_DEF(DRM_IOCTL_GEM_FLINK, drm_gem_flink_ioctl, DRM_AUTH|DRM_UNLOCKED), DRM_IOCTL_DEF(DRM_IOCTL_GEM_OPEN, drm_gem_open_ioctl, DRM_AUTH|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETRESOURCES, drm_mode_getresources, DRM_CONTROL_ALLOW|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETRESOURCES, drm_mode_getresources, DRM_UNLOCKED), DRM_IOCTL_DEF(DRM_IOCTL_PRIME_HANDLE_TO_FD, drm_prime_handle_to_fd_ioctl, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW), DRM_IOCTL_DEF(DRM_IOCTL_PRIME_FD_TO_HANDLE, drm_prime_fd_to_handle_ioctl, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPLANERESOURCES, drm_mode_getplane_res, DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETCRTC, drm_mode_getcrtc, DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETCRTC, drm_mode_setcrtc, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPLANE, drm_mode_getplane, DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETPLANE, drm_mode_setplane, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_CURSOR, drm_mode_cursor_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPLANERESOURCES, drm_mode_getplane_res, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETCRTC, drm_mode_getcrtc, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETCRTC, drm_mode_setcrtc, DRM_MASTER|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPLANE, drm_mode_getplane, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETPLANE, drm_mode_setplane, DRM_MASTER|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_CURSOR, drm_mode_cursor_ioctl, DRM_MASTER|DRM_UNLOCKED), DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETGAMMA, drm_mode_gamma_get_ioctl, DRM_UNLOCKED), DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETGAMMA, drm_mode_gamma_set_ioctl, DRM_MASTER|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETENCODER, drm_mode_getencoder, DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETCONNECTOR, drm_mode_getconnector, DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_ATTACHMODE, drm_noop, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_DETACHMODE, drm_noop, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPROPERTY, drm_mode_getproperty_ioctl, DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETPROPERTY, drm_mode_connector_property_set_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPROPBLOB, drm_mode_getblob_ioctl, DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETFB, drm_mode_getfb, DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_ADDFB, drm_mode_addfb, DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_ADDFB2, drm_mode_addfb2, DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_RMFB, drm_mode_rmfb, DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_PAGE_FLIP, drm_mode_page_flip_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_DIRTYFB, drm_mode_dirtyfb_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_CREATE_DUMB, drm_mode_create_dumb_ioctl, DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_MAP_DUMB, drm_mode_mmap_dumb_ioctl, DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_DESTROY_DUMB, drm_mode_destroy_dumb_ioctl, DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_OBJ_GETPROPERTIES, drm_mode_obj_get_properties_ioctl, DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_OBJ_SETPROPERTY, drm_mode_obj_set_property_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_CURSOR2, drm_mode_cursor2_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_ATOMIC, drm_mode_atomic_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_CREATEPROPBLOB, drm_mode_createblob_ioctl, DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_DESTROYPROPBLOB, drm_mode_destroyblob_ioctl, DRM_CONTROL_ALLOW|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETENCODER, drm_mode_getencoder, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETCONNECTOR, drm_mode_getconnector, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_ATTACHMODE, drm_noop, DRM_MASTER|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_DETACHMODE, drm_noop, DRM_MASTER|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPROPERTY, drm_mode_getproperty_ioctl, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETPROPERTY, drm_mode_connector_property_set_ioctl, DRM_MASTER|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPROPBLOB, drm_mode_getblob_ioctl, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETFB, drm_mode_getfb, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_ADDFB, drm_mode_addfb, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_ADDFB2, drm_mode_addfb2, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_RMFB, drm_mode_rmfb, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_PAGE_FLIP, drm_mode_page_flip_ioctl, DRM_MASTER|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_DIRTYFB, drm_mode_dirtyfb_ioctl, DRM_MASTER|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_CREATE_DUMB, drm_mode_create_dumb_ioctl, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_MAP_DUMB, drm_mode_mmap_dumb_ioctl, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_DESTROY_DUMB, drm_mode_destroy_dumb_ioctl, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_OBJ_GETPROPERTIES, drm_mode_obj_get_properties_ioctl, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_OBJ_SETPROPERTY, drm_mode_obj_set_property_ioctl, DRM_MASTER|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_CURSOR2, drm_mode_cursor2_ioctl, DRM_MASTER|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_ATOMIC, drm_mode_atomic_ioctl, DRM_MASTER|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_CREATEPROPBLOB, drm_mode_createblob_ioctl, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_DESTROYPROPBLOB, drm_mode_destroyblob_ioctl, DRM_UNLOCKED), DRM_IOCTL_DEF(DRM_IOCTL_SYNCOBJ_CREATE, drm_syncobj_create_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), @@ -665,10 +668,10 @@ static const struct drm_ioctl_desc drm_ioctls[] = { DRM_UNLOCKED|DRM_RENDER_ALLOW), DRM_IOCTL_DEF(DRM_IOCTL_CRTC_GET_SEQUENCE, drm_crtc_get_sequence_ioctl, DRM_UNLOCKED), DRM_IOCTL_DEF(DRM_IOCTL_CRTC_QUEUE_SEQUENCE, drm_crtc_queue_sequence_ioctl, DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_CREATE_LEASE, drm_mode_create_lease_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_LIST_LESSEES, drm_mode_list_lessees_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_GET_LEASE, drm_mode_get_lease_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), - DRM_IOCTL_DEF(DRM_IOCTL_MODE_REVOKE_LEASE, drm_mode_revoke_lease_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_CREATE_LEASE, drm_mode_create_lease_ioctl, DRM_MASTER|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_LIST_LESSEES, drm_mode_list_lessees_ioctl, DRM_MASTER|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GET_LEASE, drm_mode_get_lease_ioctl, DRM_MASTER|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_REVOKE_LEASE, drm_mode_revoke_lease_ioctl, DRM_MASTER|DRM_UNLOCKED), }; #define DRM_CORE_IOCTL_COUNT ARRAY_SIZE( drm_ioctls ) diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index e82b61e08f8c..c78ca0e84ffd 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -939,17 +939,68 @@ struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev, } EXPORT_SYMBOL(drm_mode_duplicate); +static bool drm_mode_match_timings(const struct drm_display_mode *mode1, + const struct drm_display_mode *mode2) +{ + return mode1->hdisplay == mode2->hdisplay && + mode1->hsync_start == mode2->hsync_start && + mode1->hsync_end == mode2->hsync_end && + mode1->htotal == mode2->htotal && + mode1->hskew == mode2->hskew && + mode1->vdisplay == mode2->vdisplay && + mode1->vsync_start == mode2->vsync_start && + mode1->vsync_end == mode2->vsync_end && + mode1->vtotal == mode2->vtotal && + mode1->vscan == mode2->vscan; +} + +static bool drm_mode_match_clock(const struct drm_display_mode *mode1, + const struct drm_display_mode *mode2) +{ + /* + * do clock check convert to PICOS + * so fb modes get matched the same + */ + if (mode1->clock && mode2->clock) + return KHZ2PICOS(mode1->clock) == KHZ2PICOS(mode2->clock); + else + return mode1->clock == mode2->clock; +} + +static bool drm_mode_match_flags(const struct drm_display_mode *mode1, + const struct drm_display_mode *mode2) +{ + return (mode1->flags & ~DRM_MODE_FLAG_3D_MASK) == + (mode2->flags & ~DRM_MODE_FLAG_3D_MASK); +} + +static bool drm_mode_match_3d_flags(const struct drm_display_mode *mode1, + const struct drm_display_mode *mode2) +{ + return (mode1->flags & DRM_MODE_FLAG_3D_MASK) == + (mode2->flags & DRM_MODE_FLAG_3D_MASK); +} + +static bool drm_mode_match_aspect_ratio(const struct drm_display_mode *mode1, + const struct drm_display_mode *mode2) +{ + return mode1->picture_aspect_ratio == mode2->picture_aspect_ratio; +} + /** - * drm_mode_equal - test modes for equality + * drm_mode_match - test modes for (partial) equality * @mode1: first mode * @mode2: second mode + * @match_flags: which parts need to match (DRM_MODE_MATCH_*) * * Check to see if @mode1 and @mode2 are equivalent. * * Returns: - * True if the modes are equal, false otherwise. + * True if the modes are (partially) equal, false otherwise. */ -bool drm_mode_equal(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) +bool drm_mode_match(const struct drm_display_mode *mode1, + const struct drm_display_mode *mode2, + unsigned int match_flags) { if (!mode1 && !mode2) return true; @@ -957,15 +1008,49 @@ bool drm_mode_equal(const struct drm_display_mode *mode1, const struct drm_displ if (!mode1 || !mode2) return false; - /* do clock check convert to PICOS so fb modes get matched - * the same */ - if (mode1->clock && mode2->clock) { - if (KHZ2PICOS(mode1->clock) != KHZ2PICOS(mode2->clock)) - return false; - } else if (mode1->clock != mode2->clock) + if (match_flags & DRM_MODE_MATCH_TIMINGS && + !drm_mode_match_timings(mode1, mode2)) + return false; + + if (match_flags & DRM_MODE_MATCH_CLOCK && + !drm_mode_match_clock(mode1, mode2)) + return false; + + if (match_flags & DRM_MODE_MATCH_FLAGS && + !drm_mode_match_flags(mode1, mode2)) + return false; + + if (match_flags & DRM_MODE_MATCH_3D_FLAGS && + !drm_mode_match_3d_flags(mode1, mode2)) return false; - return drm_mode_equal_no_clocks(mode1, mode2); + if (match_flags & DRM_MODE_MATCH_ASPECT_RATIO && + !drm_mode_match_aspect_ratio(mode1, mode2)) + return false; + + return true; +} +EXPORT_SYMBOL(drm_mode_match); + +/** + * drm_mode_equal - test modes for equality + * @mode1: first mode + * @mode2: second mode + * + * Check to see if @mode1 and @mode2 are equivalent. + * + * Returns: + * True if the modes are equal, false otherwise. + */ +bool drm_mode_equal(const struct drm_display_mode *mode1, + const struct drm_display_mode *mode2) +{ + return drm_mode_match(mode1, mode2, + DRM_MODE_MATCH_TIMINGS | + DRM_MODE_MATCH_CLOCK | + DRM_MODE_MATCH_FLAGS | + DRM_MODE_MATCH_3D_FLAGS| + DRM_MODE_MATCH_ASPECT_RATIO); } EXPORT_SYMBOL(drm_mode_equal); @@ -980,13 +1065,13 @@ EXPORT_SYMBOL(drm_mode_equal); * Returns: * True if the modes are equal, false otherwise. */ -bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) +bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1, + const struct drm_display_mode *mode2) { - if ((mode1->flags & DRM_MODE_FLAG_3D_MASK) != - (mode2->flags & DRM_MODE_FLAG_3D_MASK)) - return false; - - return drm_mode_equal_no_clocks_no_stereo(mode1, mode2); + return drm_mode_match(mode1, mode2, + DRM_MODE_MATCH_TIMINGS | + DRM_MODE_MATCH_FLAGS | + DRM_MODE_MATCH_3D_FLAGS); } EXPORT_SYMBOL(drm_mode_equal_no_clocks); @@ -1004,21 +1089,9 @@ EXPORT_SYMBOL(drm_mode_equal_no_clocks); bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { - if (mode1->hdisplay == mode2->hdisplay && - mode1->hsync_start == mode2->hsync_start && - mode1->hsync_end == mode2->hsync_end && - mode1->htotal == mode2->htotal && - mode1->hskew == mode2->hskew && - mode1->vdisplay == mode2->vdisplay && - mode1->vsync_start == mode2->vsync_start && - mode1->vsync_end == mode2->vsync_end && - mode1->vtotal == mode2->vtotal && - mode1->vscan == mode2->vscan && - (mode1->flags & ~DRM_MODE_FLAG_3D_MASK) == - (mode2->flags & ~DRM_MODE_FLAG_3D_MASK)) - return true; - - return false; + return drm_mode_match(mode1, mode2, + DRM_MODE_MATCH_TIMINGS | + DRM_MODE_MATCH_FLAGS); } EXPORT_SYMBOL(drm_mode_equal_no_clocks_no_stereo); @@ -1575,6 +1648,26 @@ void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out, out->vrefresh = in->vrefresh; out->flags = in->flags; out->type = in->type; + + switch (in->picture_aspect_ratio) { + case HDMI_PICTURE_ASPECT_4_3: + out->flags |= DRM_MODE_FLAG_PIC_AR_4_3; + break; + case HDMI_PICTURE_ASPECT_16_9: + out->flags |= DRM_MODE_FLAG_PIC_AR_16_9; + break; + case HDMI_PICTURE_ASPECT_64_27: + out->flags |= DRM_MODE_FLAG_PIC_AR_64_27; + break; + case HDMI_PICTURE_ASPECT_256_135: + out->flags |= DRM_MODE_FLAG_PIC_AR_256_135; + break; + case HDMI_PICTURE_ASPECT_RESERVED: + default: + out->flags |= DRM_MODE_FLAG_PIC_AR_NONE; + break; + } + strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN); out->name[DRM_DISPLAY_MODE_LEN-1] = 0; } @@ -1621,6 +1714,30 @@ int drm_mode_convert_umode(struct drm_device *dev, strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN); out->name[DRM_DISPLAY_MODE_LEN-1] = 0; + /* Clearing picture aspect ratio bits from out flags, + * as the aspect-ratio information is not stored in + * flags for kernel-mode, but in picture_aspect_ratio. + */ + out->flags &= ~DRM_MODE_FLAG_PIC_AR_MASK; + + switch (in->flags & DRM_MODE_FLAG_PIC_AR_MASK) { + case DRM_MODE_FLAG_PIC_AR_4_3: + out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_4_3; + break; + case DRM_MODE_FLAG_PIC_AR_16_9: + out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_16_9; + break; + case DRM_MODE_FLAG_PIC_AR_64_27: + out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_64_27; + break; + case DRM_MODE_FLAG_PIC_AR_256_135: + out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_256_135; + break; + default: + out->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE; + break; + } + out->status = drm_mode_validate_driver(dev, out); if (out->status != MODE_OK) return -EINVAL; diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c index caebddda8bce..fe9c6c731e87 100644 --- a/drivers/gpu/drm/drm_panel_orientation_quirks.c +++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c @@ -172,10 +172,9 @@ int drm_get_panel_orientation_quirk(int width, int height) if (!bios_date) continue; - for (i = 0; data->bios_dates[i]; i++) { - if (!strcmp(data->bios_dates[i], bios_date)) - return data->orientation; - } + i = match_string(data->bios_dates, -1, bios_date); + if (i >= 0) + return data->orientation; } return DRM_MODE_PANEL_ORIENTATION_UNKNOWN; diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index caf675e3e692..397b46b33739 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -409,7 +409,10 @@ void *drm_gem_dmabuf_vmap(struct dma_buf *dma_buf) struct drm_gem_object *obj = dma_buf->priv; struct drm_device *dev = obj->dev; - return dev->driver->gem_prime_vmap(obj); + if (dev->driver->gem_prime_vmap) + return dev->driver->gem_prime_vmap(obj); + else + return NULL; } EXPORT_SYMBOL(drm_gem_dmabuf_vmap); @@ -426,7 +429,8 @@ void drm_gem_dmabuf_vunmap(struct dma_buf *dma_buf, void *vaddr) struct drm_gem_object *obj = dma_buf->priv; struct drm_device *dev = obj->dev; - dev->driver->gem_prime_vunmap(obj, vaddr); + if (dev->driver->gem_prime_vunmap) + dev->driver->gem_prime_vunmap(obj, vaddr); } EXPORT_SYMBOL(drm_gem_dmabuf_vunmap); diff --git a/drivers/gpu/drm/drm_property.c b/drivers/gpu/drm/drm_property.c index 8f4672daac7f..1f8031e30f53 100644 --- a/drivers/gpu/drm/drm_property.c +++ b/drivers/gpu/drm/drm_property.c @@ -169,9 +169,9 @@ struct drm_property *drm_property_create_enum(struct drm_device *dev, return NULL; for (i = 0; i < num_values; i++) { - ret = drm_property_add_enum(property, i, - props[i].type, - props[i].name); + ret = drm_property_add_enum(property, + props[i].type, + props[i].name); if (ret) { drm_property_destroy(dev, property); return NULL; @@ -209,7 +209,7 @@ struct drm_property *drm_property_create_bitmask(struct drm_device *dev, uint64_t supported_bits) { struct drm_property *property; - int i, ret, index = 0; + int i, ret; int num_values = hweight64(supported_bits); flags |= DRM_MODE_PROP_BITMASK; @@ -221,14 +221,9 @@ struct drm_property *drm_property_create_bitmask(struct drm_device *dev, if (!(supported_bits & (1ULL << props[i].type))) continue; - if (WARN_ON(index >= num_values)) { - drm_property_destroy(dev, property); - return NULL; - } - - ret = drm_property_add_enum(property, index++, - props[i].type, - props[i].name); + ret = drm_property_add_enum(property, + props[i].type, + props[i].name); if (ret) { drm_property_destroy(dev, property); return NULL; @@ -376,7 +371,6 @@ EXPORT_SYMBOL(drm_property_create_bool); /** * drm_property_add_enum - add a possible value to an enumeration property * @property: enumeration property to change - * @index: index of the new enumeration * @value: value of the new enumeration * @name: symbolic name of the new enumeration * @@ -388,10 +382,11 @@ EXPORT_SYMBOL(drm_property_create_bool); * Returns: * Zero on success, error code on failure. */ -int drm_property_add_enum(struct drm_property *property, int index, +int drm_property_add_enum(struct drm_property *property, uint64_t value, const char *name) { struct drm_property_enum *prop_enum; + int index = 0; if (WARN_ON(strlen(name) >= DRM_PROP_NAME_LEN)) return -EINVAL; @@ -411,8 +406,12 @@ int drm_property_add_enum(struct drm_property *property, int index, list_for_each_entry(prop_enum, &property->enum_list, head) { if (WARN_ON(prop_enum->value == value)) return -EINVAL; + index++; } + if (WARN_ON(index >= property->num_values)) + return -EINVAL; + prop_enum = kzalloc(sizeof(struct drm_property_enum), GFP_KERNEL); if (!prop_enum) return -ENOMEM; diff --git a/drivers/gpu/drm/drm_rect.c b/drivers/gpu/drm/drm_rect.c index 9817c1445ba9..8c057829b804 100644 --- a/drivers/gpu/drm/drm_rect.c +++ b/drivers/gpu/drm/drm_rect.c @@ -50,13 +50,25 @@ bool drm_rect_intersect(struct drm_rect *r1, const struct drm_rect *r2) } EXPORT_SYMBOL(drm_rect_intersect); +static u32 clip_scaled(u32 src, u32 dst, u32 clip) +{ + u64 tmp = mul_u32_u32(src, dst - clip); + + /* + * Round toward 1.0 when clipping so that we don't accidentally + * change upscaling to downscaling or vice versa. + */ + if (src < (dst << 16)) + return DIV_ROUND_UP_ULL(tmp, dst); + else + return DIV_ROUND_DOWN_ULL(tmp, dst); +} + /** * drm_rect_clip_scaled - perform a scaled clip operation * @src: source window rectangle * @dst: destination window rectangle * @clip: clip rectangle - * @hscale: horizontal scaling factor - * @vscale: vertical scaling factor * * Clip rectangle @dst by rectangle @clip. Clip rectangle @src by the * same amounts multiplied by @hscale and @vscale. @@ -66,33 +78,44 @@ EXPORT_SYMBOL(drm_rect_intersect); * %false otherwise */ bool drm_rect_clip_scaled(struct drm_rect *src, struct drm_rect *dst, - const struct drm_rect *clip, - int hscale, int vscale) + const struct drm_rect *clip) { int diff; diff = clip->x1 - dst->x1; if (diff > 0) { - int64_t tmp = src->x1 + (int64_t) diff * hscale; - src->x1 = clamp_t(int64_t, tmp, INT_MIN, INT_MAX); + u32 new_src_w = clip_scaled(drm_rect_width(src), + drm_rect_width(dst), diff); + + src->x1 = clamp_t(int64_t, src->x2 - new_src_w, INT_MIN, INT_MAX); + dst->x1 = clip->x1; } diff = clip->y1 - dst->y1; if (diff > 0) { - int64_t tmp = src->y1 + (int64_t) diff * vscale; - src->y1 = clamp_t(int64_t, tmp, INT_MIN, INT_MAX); + u32 new_src_h = clip_scaled(drm_rect_height(src), + drm_rect_height(dst), diff); + + src->y1 = clamp_t(int64_t, src->y2 - new_src_h, INT_MIN, INT_MAX); + dst->y1 = clip->y1; } diff = dst->x2 - clip->x2; if (diff > 0) { - int64_t tmp = src->x2 - (int64_t) diff * hscale; - src->x2 = clamp_t(int64_t, tmp, INT_MIN, INT_MAX); + u32 new_src_w = clip_scaled(drm_rect_width(src), + drm_rect_width(dst), diff); + + src->x2 = clamp_t(int64_t, src->x1 + new_src_w, INT_MIN, INT_MAX); + dst->x2 = clip->x2; } diff = dst->y2 - clip->y2; if (diff > 0) { - int64_t tmp = src->y2 - (int64_t) diff * vscale; - src->y2 = clamp_t(int64_t, tmp, INT_MIN, INT_MAX); + u32 new_src_h = clip_scaled(drm_rect_height(src), + drm_rect_height(dst), diff); + + src->y2 = clamp_t(int64_t, src->y1 + new_src_h, INT_MIN, INT_MAX); + dst->y2 = clip->y2; } - return drm_rect_intersect(dst, clip); + return drm_rect_visible(dst); } EXPORT_SYMBOL(drm_rect_clip_scaled); @@ -106,7 +129,10 @@ static int drm_calc_scale(int src, int dst) if (dst == 0) return 0; - scale = src / dst; + if (src > (dst << 16)) + return DIV_ROUND_UP(src, dst); + else + scale = src / dst; return scale; } @@ -121,6 +147,10 @@ static int drm_calc_scale(int src, int dst) * Calculate the horizontal scaling factor as * (@src width) / (@dst width). * + * If the scale is below 1 << 16, round down. If the scale is above + * 1 << 16, round up. This will calculate the scale with the most + * pessimistic limit calculation. + * * RETURNS: * The horizontal scaling factor, or errno of out of limits. */ @@ -152,6 +182,10 @@ EXPORT_SYMBOL(drm_rect_calc_hscale); * Calculate the vertical scaling factor as * (@src height) / (@dst height). * + * If the scale is below 1 << 16, round down. If the scale is above + * 1 << 16, round up. This will calculate the scale with the most + * pessimistic limit calculation. + * * RETURNS: * The vertical scaling factor, or errno of out of limits. */ @@ -189,6 +223,10 @@ EXPORT_SYMBOL(drm_rect_calc_vscale); * If the calculated scaling factor is above @max_vscale, * decrease the height of rectangle @src to compensate. * + * If the scale is below 1 << 16, round down. If the scale is above + * 1 << 16, round up. This will calculate the scale with the most + * pessimistic limit calculation. + * * RETURNS: * The horizontal scaling factor. */ @@ -239,6 +277,10 @@ EXPORT_SYMBOL(drm_rect_calc_hscale_relaxed); * If the calculated scaling factor is above @max_vscale, * decrease the height of rectangle @src to compensate. * + * If the scale is below 1 << 16, round down. If the scale is above + * 1 << 16, round up. This will calculate the scale with the most + * pessimistic limit calculation. + * * RETURNS: * The vertical scaling factor. */ @@ -373,8 +415,8 @@ EXPORT_SYMBOL(drm_rect_rotate); * them when doing a rotatation and its inverse. * That is, if you do :: * - * DRM_MODE_PROP_ROTATE(&r, width, height, rotation); - * DRM_MODE_ROTATE_inv(&r, width, height, rotation); + * drm_rect_rotate(&r, width, height, rotation); + * drm_rect_rotate_inv(&r, width, height, rotation); * * you will always get back the original rectangle. */ diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c index 1c5b5ce1fd7f..b3c1daad1169 100644 --- a/drivers/gpu/drm/drm_sysfs.c +++ b/drivers/gpu/drm/drm_sysfs.c @@ -331,9 +331,7 @@ struct device *drm_sysfs_minor_alloc(struct drm_minor *minor) struct device *kdev; int r; - if (minor->type == DRM_MINOR_CONTROL) - minor_str = "controlD%d"; - else if (minor->type == DRM_MINOR_RENDER) + if (minor->type == DRM_MINOR_RENDER) minor_str = "renderD%d"; else minor_str = "card%d"; diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c index 3a3bf752e03a..34b85767e4da 100644 --- a/drivers/gpu/drm/gma500/cdv_device.c +++ b/drivers/gpu/drm/gma500/cdv_device.c @@ -485,7 +485,7 @@ void cdv_intel_attach_force_audio_property(struct drm_connector *connector) return; for (i = 0; i < ARRAY_SIZE(force_audio_names); i++) - drm_property_add_enum(prop, i, i-1, force_audio_names[i]); + drm_property_add_enum(prop, i-1, force_audio_names[i]); dev_priv->force_audio_property = prop; } @@ -514,7 +514,7 @@ void cdv_intel_attach_broadcast_rgb_property(struct drm_connector *connector) return; for (i = 0; i < ARRAY_SIZE(broadcast_rgb_names); i++) - drm_property_add_enum(prop, i, i, broadcast_rgb_names[i]); + drm_property_add_enum(prop, i, broadcast_rgb_names[i]); dev_priv->broadcast_rgb_property = prop; } diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c index 8dc2b19f913b..f2ee6aa10afa 100644 --- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c +++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c @@ -2281,7 +2281,7 @@ static bool psb_intel_sdvo_tv_create_property(struct psb_intel_sdvo *psb_intel_s for (i = 0; i < psb_intel_sdvo_connector->format_supported_num; i++) drm_property_add_enum( - psb_intel_sdvo_connector->tv_format, i, + psb_intel_sdvo_connector->tv_format, i, tv_format_names[psb_intel_sdvo_connector->tv_format_supported[i]]); psb_intel_sdvo->tv_format_index = psb_intel_sdvo_connector->tv_format_supported[0]; diff --git a/drivers/gpu/drm/i915/Kconfig.debug b/drivers/gpu/drm/i915/Kconfig.debug index 80efee1ff7f3..9de8b1c51a5c 100644 --- a/drivers/gpu/drm/i915/Kconfig.debug +++ b/drivers/gpu/drm/i915/Kconfig.debug @@ -26,7 +26,7 @@ config DRM_I915_DEBUG select DRM_VGEM # used by igt/prime_vgem (dmabuf interop checks) select DRM_DEBUG_MM if DRM=y select STACKDEPOT if DRM=y # for DRM_DEBUG_MM - select DRM_DEBUG_MM_SELFTEST + select DRM_DEBUG_SELFTEST select SW_SYNC # signaling validation framework (igt/syncobj*) select DRM_I915_SW_FENCE_DEBUG_OBJECTS select DRM_I915_SELFTEST diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index b7dbeba72dec..c471a7528a50 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -2822,10 +2822,10 @@ static const struct drm_ioctl_desc i915_ioctls[] = { DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_RENDER_ALLOW), DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id_ioctl, 0), DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_RENDER_ALLOW), - DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW), - DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW), - DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW), - DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, drm_noop, DRM_MASTER|DRM_CONTROL_ALLOW), + DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image_ioctl, DRM_MASTER), + DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs_ioctl, DRM_MASTER), + DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey_ioctl, DRM_MASTER), + DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, drm_noop, DRM_MASTER), DRM_IOCTL_DEF_DRV(I915_GEM_WAIT, i915_gem_wait_ioctl, DRM_AUTH|DRM_RENDER_ALLOW), DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_CREATE, i915_gem_context_create_ioctl, DRM_RENDER_ALLOW), DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_DESTROY, i915_gem_context_destroy_ioctl, DRM_RENDER_ALLOW), diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 96e213ec202d..25005023c243 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2779,9 +2779,8 @@ static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo, return false; for (i = 0; i < intel_sdvo_connector->format_supported_num; i++) - drm_property_add_enum( - intel_sdvo_connector->tv_format, i, - i, tv_format_names[intel_sdvo_connector->tv_format_supported[i]]); + drm_property_add_enum(intel_sdvo_connector->tv_format, i, + tv_format_names[intel_sdvo_connector->tv_format_supported[i]]); intel_sdvo_connector->base.base.state->tv.mode = intel_sdvo_connector->tv_format_supported[0]; drm_object_attach_property(&intel_sdvo_connector->base.base.base, diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index aa1dfaa692b9..970015dcc6f1 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -936,22 +936,12 @@ intel_check_sprite_plane(struct intel_plane *plane, struct drm_i915_private *dev_priv = to_i915(plane->base.dev); struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); struct drm_framebuffer *fb = state->base.fb; - int crtc_x, crtc_y; - unsigned int crtc_w, crtc_h; - uint32_t src_x, src_y, src_w, src_h; - struct drm_rect *src = &state->base.src; - struct drm_rect *dst = &state->base.dst; - struct drm_rect clip = {}; int max_stride = INTEL_GEN(dev_priv) >= 9 ? 32768 : 16384; - int hscale, vscale; int max_scale, min_scale; bool can_scale; int ret; uint32_t pixel_format = 0; - *src = drm_plane_state_src(&state->base); - *dst = drm_plane_state_dest(&state->base); - if (!fb) { state->base.visible = false; return 0; @@ -990,64 +980,19 @@ intel_check_sprite_plane(struct intel_plane *plane, min_scale = plane->can_scale ? 1 : (1 << 16); } - /* - * FIXME the following code does a bunch of fuzzy adjustments to the - * coordinates and sizes. We probably need some way to decide whether - * more strict checking should be done instead. - */ - drm_rect_rotate(src, fb->width << 16, fb->height << 16, - state->base.rotation); - - hscale = drm_rect_calc_hscale_relaxed(src, dst, min_scale, max_scale); - BUG_ON(hscale < 0); - - vscale = drm_rect_calc_vscale_relaxed(src, dst, min_scale, max_scale); - BUG_ON(vscale < 0); - - if (crtc_state->base.enable) - drm_mode_get_hv_timing(&crtc_state->base.mode, - &clip.x2, &clip.y2); - - state->base.visible = drm_rect_clip_scaled(src, dst, &clip, hscale, vscale); - - crtc_x = dst->x1; - crtc_y = dst->y1; - crtc_w = drm_rect_width(dst); - crtc_h = drm_rect_height(dst); + ret = drm_atomic_helper_check_plane_state(&state->base, + &crtc_state->base, + min_scale, max_scale, + true, true); + if (ret) + return ret; if (state->base.visible) { - /* check again in case clipping clamped the results */ - hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale); - if (hscale < 0) { - DRM_DEBUG_KMS("Horizontal scaling factor out of limits\n"); - drm_rect_debug_print("src: ", src, true); - drm_rect_debug_print("dst: ", dst, false); - - return hscale; - } - - vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale); - if (vscale < 0) { - DRM_DEBUG_KMS("Vertical scaling factor out of limits\n"); - drm_rect_debug_print("src: ", src, true); - drm_rect_debug_print("dst: ", dst, false); - - return vscale; - } - - /* Make the source viewport size an exact multiple of the scaling factors. */ - drm_rect_adjust_size(src, - drm_rect_width(dst) * hscale - drm_rect_width(src), - drm_rect_height(dst) * vscale - drm_rect_height(src)); - - drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16, - state->base.rotation); - - /* sanity check to make sure the src viewport wasn't enlarged */ - WARN_ON(src->x1 < (int) state->base.src_x || - src->y1 < (int) state->base.src_y || - src->x2 > (int) state->base.src_x + state->base.src_w || - src->y2 > (int) state->base.src_y + state->base.src_h); + struct drm_rect *src = &state->base.src; + struct drm_rect *dst = &state->base.dst; + unsigned int crtc_w = drm_rect_width(dst); + unsigned int crtc_h = drm_rect_height(dst); + uint32_t src_x, src_y, src_w, src_h; /* * Hardware doesn't handle subpixel coordinates. @@ -1060,58 +1005,39 @@ intel_check_sprite_plane(struct intel_plane *plane, src_y = src->y1 >> 16; src_h = drm_rect_height(src) >> 16; - if (intel_format_is_yuv(fb->format->format)) { - src_x &= ~1; - src_w &= ~1; - - /* - * Must keep src and dst the - * same if we can't scale. - */ - if (!can_scale) - crtc_w &= ~1; + src->x1 = src_x << 16; + src->x2 = (src_x + src_w) << 16; + src->y1 = src_y << 16; + src->y2 = (src_y + src_h) << 16; - if (crtc_w == 0) - state->base.visible = false; + if (intel_format_is_yuv(fb->format->format) && + (src_x % 2 || src_w % 2)) { + DRM_DEBUG_KMS("src x/w (%u, %u) must be a multiple of 2 for YUV planes\n", + src_x, src_w); + return -EINVAL; } - } - /* Check size restrictions when scaling */ - if (state->base.visible && (src_w != crtc_w || src_h != crtc_h)) { - unsigned int width_bytes; - int cpp = fb->format->cpp[0]; + /* Check size restrictions when scaling */ + if (src_w != crtc_w || src_h != crtc_h) { + unsigned int width_bytes; + int cpp = fb->format->cpp[0]; - WARN_ON(!can_scale); + WARN_ON(!can_scale); - /* FIXME interlacing min height is 6 */ + width_bytes = ((src_x * cpp) & 63) + src_w * cpp; - if (crtc_w < 3 || crtc_h < 3) - state->base.visible = false; - - if (src_w < 3 || src_h < 3) - state->base.visible = false; - - width_bytes = ((src_x * cpp) & 63) + src_w * cpp; - - if (INTEL_GEN(dev_priv) < 9 && (src_w > 2048 || src_h > 2048 || - width_bytes > 4096 || fb->pitches[0] > 4096)) { - DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n"); - return -EINVAL; + /* FIXME interlacing min height is 6 */ + if (INTEL_GEN(dev_priv) < 9 && ( + src_w < 3 || src_h < 3 || + src_w > 2048 || src_h > 2048 || + crtc_w < 3 || crtc_h < 3 || + width_bytes > 4096 || fb->pitches[0] > 4096)) { + DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n"); + return -EINVAL; + } } } - if (state->base.visible) { - src->x1 = src_x << 16; - src->x2 = (src_x + src_w) << 16; - src->y1 = src_y << 16; - src->y2 = (src_y + src_h) << 16; - } - - dst->x1 = crtc_x; - dst->x2 = crtc_x + crtc_w; - dst->y1 = crtc_y; - dst->y2 = crtc_y + crtc_h; - if (INTEL_GEN(dev_priv) >= 9) { ret = skl_check_plane_surface(crtc_state, state); if (ret) diff --git a/drivers/gpu/drm/msm/adreno/adreno_device.c b/drivers/gpu/drm/msm/adreno/adreno_device.c index 8e0cb161754b..0ae5ace65462 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_device.c +++ b/drivers/gpu/drm/msm/adreno/adreno_device.c @@ -168,7 +168,6 @@ struct msm_gpu *adreno_load_gpu(struct drm_device *dev) if (gpu->funcs->debugfs_init) { gpu->funcs->debugfs_init(gpu, dev->primary); gpu->funcs->debugfs_init(gpu, dev->render); - gpu->funcs->debugfs_init(gpu, dev->control); } #endif diff --git a/drivers/gpu/drm/msm/msm_debugfs.c b/drivers/gpu/drm/msm/msm_debugfs.c index ba74cb4f94df..1ff3fda245d1 100644 --- a/drivers/gpu/drm/msm/msm_debugfs.c +++ b/drivers/gpu/drm/msm/msm_debugfs.c @@ -140,9 +140,6 @@ int msm_debugfs_late_init(struct drm_device *dev) if (ret) return ret; ret = late_init_minor(dev->render); - if (ret) - return ret; - ret = late_init_minor(dev->control); return ret; } diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 009713404cc4..7d0bec8dd03d 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -338,11 +338,9 @@ static struct nouveau_drm_prop_enum_list dither_depth[] = { if (c) { \ p = drm_property_create(dev, DRM_MODE_PROP_ENUM, n, c); \ l = (list); \ - c = 0; \ while (p && l->gen_mask) { \ if (l->gen_mask & (1 << (gen))) { \ - drm_property_add_enum(p, c, l->type, l->name); \ - c++; \ + drm_property_add_enum(p, l->type, l->name); \ } \ l++; \ } \ diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c index d964d454e4ae..2c9c9722734f 100644 --- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c +++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c @@ -238,12 +238,6 @@ static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts, static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val) { -#if 0 - /* The firmware uses LP DSI transactions like this to bring up - * the hardware, which should be faster than using I2C to then - * pass to the Toshiba. However, I was unable to get it to - * work. - */ u8 msg[] = { reg, reg >> 8, @@ -253,13 +247,7 @@ static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val) val >> 24, }; - mipi_dsi_dcs_write_buffer(ts->dsi, msg, sizeof(msg)); -#else - rpi_touchscreen_i2c_write(ts, REG_WR_ADDRH, reg >> 8); - rpi_touchscreen_i2c_write(ts, REG_WR_ADDRL, reg); - rpi_touchscreen_i2c_write(ts, REG_WRITEH, val >> 8); - rpi_touchscreen_i2c_write(ts, REG_WRITEL, val); -#endif + mipi_dsi_generic_write(ts->dsi, msg, sizeof(msg)); return 0; } diff --git a/drivers/gpu/drm/pl111/Makefile b/drivers/gpu/drm/pl111/Makefile index 9c5e8dba8ac6..19a8189dc54f 100644 --- a/drivers/gpu/drm/pl111/Makefile +++ b/drivers/gpu/drm/pl111/Makefile @@ -3,6 +3,7 @@ pl111_drm-y += pl111_display.o \ pl111_versatile.o \ pl111_drv.o +pl111_drm-$(CONFIG_ARCH_VEXPRESS) += pl111_vexpress.o pl111_drm-$(CONFIG_DEBUG_FS) += pl111_debugfs.o obj-$(CONFIG_DRM_PL111) += pl111_drm.o diff --git a/drivers/gpu/drm/pl111/pl111_drm.h b/drivers/gpu/drm/pl111/pl111_drm.h index 8639b2d4ddf7..ce4501d0ab48 100644 --- a/drivers/gpu/drm/pl111/pl111_drm.h +++ b/drivers/gpu/drm/pl111/pl111_drm.h @@ -79,6 +79,7 @@ struct pl111_drm_dev_private { const struct pl111_variant_data *variant; void (*variant_display_enable) (struct drm_device *drm, u32 format); void (*variant_display_disable) (struct drm_device *drm); + bool use_device_memory; }; int pl111_display_init(struct drm_device *dev); diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c index 4621259d5387..454ff0804642 100644 --- a/drivers/gpu/drm/pl111/pl111_drv.c +++ b/drivers/gpu/drm/pl111/pl111_drv.c @@ -60,6 +60,7 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/of_graph.h> +#include <linux/of_reserved_mem.h> #include <drm/drmP.h> #include <drm/drm_atomic_helper.h> @@ -207,6 +208,24 @@ finish: return ret; } +static struct drm_gem_object * +pl111_gem_import_sg_table(struct drm_device *dev, + struct dma_buf_attachment *attach, + struct sg_table *sgt) +{ + struct pl111_drm_dev_private *priv = dev->dev_private; + + /* + * When using device-specific reserved memory we can't import + * DMA buffers: those are passed by reference in any global + * memory and we can only handle a specific range of memory. + */ + if (priv->use_device_memory) + return ERR_PTR(-EINVAL); + + return drm_gem_cma_prime_import_sg_table(dev, attach, sgt); +} + DEFINE_DRM_GEM_CMA_FOPS(drm_fops); static struct drm_driver pl111_drm_driver = { @@ -227,7 +246,7 @@ static struct drm_driver pl111_drm_driver = { .prime_handle_to_fd = drm_gem_prime_handle_to_fd, .prime_fd_to_handle = drm_gem_prime_fd_to_handle, .gem_prime_import = drm_gem_prime_import, - .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table, + .gem_prime_import_sg_table = pl111_gem_import_sg_table, .gem_prime_export = drm_gem_prime_export, .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table, @@ -257,6 +276,12 @@ static int pl111_amba_probe(struct amba_device *amba_dev, drm->dev_private = priv; priv->variant = variant; + ret = of_reserved_mem_device_init(dev); + if (!ret) { + dev_info(dev, "using device-specific reserved memory\n"); + priv->use_device_memory = true; + } + if (of_property_read_u32(dev->of_node, "max-memory-bandwidth", &priv->memory_bw)) { dev_info(dev, "no max memory bandwidth specified, assume unlimited\n"); @@ -275,7 +300,8 @@ static int pl111_amba_probe(struct amba_device *amba_dev, priv->regs = devm_ioremap_resource(dev, &amba_dev->res); if (IS_ERR(priv->regs)) { dev_err(dev, "%s failed mmio\n", __func__); - return PTR_ERR(priv->regs); + ret = PTR_ERR(priv->regs); + goto dev_unref; } /* This may override some variant settings */ @@ -305,11 +331,14 @@ static int pl111_amba_probe(struct amba_device *amba_dev, dev_unref: drm_dev_unref(drm); + of_reserved_mem_device_release(dev); + return ret; } static int pl111_amba_remove(struct amba_device *amba_dev) { + struct device *dev = &amba_dev->dev; struct drm_device *drm = amba_get_drvdata(amba_dev); struct pl111_drm_dev_private *priv = drm->dev_private; @@ -319,6 +348,7 @@ static int pl111_amba_remove(struct amba_device *amba_dev) drm_panel_bridge_remove(priv->bridge); drm_mode_config_cleanup(drm); drm_dev_unref(drm); + of_reserved_mem_device_release(dev); return 0; } diff --git a/drivers/gpu/drm/pl111/pl111_versatile.c b/drivers/gpu/drm/pl111/pl111_versatile.c index 9302f516045e..b9baefdba38a 100644 --- a/drivers/gpu/drm/pl111/pl111_versatile.c +++ b/drivers/gpu/drm/pl111/pl111_versatile.c @@ -1,12 +1,14 @@ #include <linux/amba/clcd-regs.h> #include <linux/device.h> #include <linux/of.h> +#include <linux/of_platform.h> #include <linux/regmap.h> #include <linux/mfd/syscon.h> #include <linux/bitops.h> #include <linux/module.h> #include <drm/drmP.h> #include "pl111_versatile.h" +#include "pl111_vexpress.h" #include "pl111_drm.h" static struct regmap *versatile_syscon_map; @@ -22,6 +24,7 @@ enum versatile_clcd { REALVIEW_CLCD_PB11MP, REALVIEW_CLCD_PBA8, REALVIEW_CLCD_PBX, + VEXPRESS_CLCD_V2M, }; static const struct of_device_id versatile_clcd_of_match[] = { @@ -53,6 +56,10 @@ static const struct of_device_id versatile_clcd_of_match[] = { .compatible = "arm,realview-pbx-syscon", .data = (void *)REALVIEW_CLCD_PBX, }, + { + .compatible = "arm,vexpress-muxfpga", + .data = (void *)VEXPRESS_CLCD_V2M, + }, {}, }; @@ -286,12 +293,26 @@ static const struct pl111_variant_data pl111_realview = { .fb_bpp = 16, }; +/* + * Versatile Express PL111 variant, again we just push the maximum + * BPP to 16 to be able to get 1024x768 without saturating the memory + * bus. The clockdivider also seems broken on the Versatile Express. + */ +static const struct pl111_variant_data pl111_vexpress = { + .name = "PL111 Versatile Express", + .formats = pl111_realview_pixel_formats, + .nformats = ARRAY_SIZE(pl111_realview_pixel_formats), + .fb_bpp = 16, + .broken_clockdivider = true, +}; + int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv) { const struct of_device_id *clcd_id; enum versatile_clcd versatile_clcd_type; struct device_node *np; struct regmap *map; + int ret; np = of_find_matching_node_and_match(NULL, versatile_clcd_of_match, &clcd_id); @@ -301,7 +322,33 @@ int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv) } versatile_clcd_type = (enum versatile_clcd)clcd_id->data; - map = syscon_node_to_regmap(np); + /* Versatile Express special handling */ + if (versatile_clcd_type == VEXPRESS_CLCD_V2M) { + struct platform_device *pdev; + + /* Registers a driver for the muxfpga */ + ret = vexpress_muxfpga_init(); + if (ret) { + dev_err(dev, "unable to initialize muxfpga driver\n"); + return ret; + } + + /* Call into deep Vexpress configuration API */ + pdev = of_find_device_by_node(np); + if (!pdev) { + dev_err(dev, "can't find the sysreg device, deferring\n"); + return -EPROBE_DEFER; + } + map = dev_get_drvdata(&pdev->dev); + if (!map) { + dev_err(dev, "sysreg has not yet probed\n"); + platform_device_put(pdev); + return -EPROBE_DEFER; + } + } else { + map = syscon_node_to_regmap(np); + } + if (IS_ERR(map)) { dev_err(dev, "no Versatile syscon regmap\n"); return PTR_ERR(map); @@ -340,6 +387,13 @@ int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv) priv->variant_display_disable = pl111_realview_clcd_disable; dev_info(dev, "set up callbacks for RealView PL111\n"); break; + case VEXPRESS_CLCD_V2M: + priv->variant = &pl111_vexpress; + dev_info(dev, "initializing Versatile Express PL111\n"); + ret = pl111_vexpress_clcd_init(dev, priv, map); + if (ret) + return ret; + break; default: dev_info(dev, "unknown Versatile system controller\n"); break; diff --git a/drivers/gpu/drm/pl111/pl111_vexpress.c b/drivers/gpu/drm/pl111/pl111_vexpress.c new file mode 100644 index 000000000000..a534b225e31b --- /dev/null +++ b/drivers/gpu/drm/pl111/pl111_vexpress.c @@ -0,0 +1,134 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Versatile Express PL111 handling + * Copyright (C) 2018 Linus Walleij + * + * This module binds to the "arm,vexpress-muxfpga" device on the + * Versatile Express configuration bus and sets up which CLCD instance + * gets muxed out on the DVI bridge. + */ +#include <linux/device.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/vexpress.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include "pl111_drm.h" +#include "pl111_vexpress.h" + +#define VEXPRESS_FPGAMUX_MOTHERBOARD 0x00 +#define VEXPRESS_FPGAMUX_DAUGHTERBOARD_1 0x01 +#define VEXPRESS_FPGAMUX_DAUGHTERBOARD_2 0x02 + +int pl111_vexpress_clcd_init(struct device *dev, + struct pl111_drm_dev_private *priv, + struct regmap *map) +{ + struct device_node *root; + struct device_node *child; + struct device_node *ct_clcd = NULL; + bool has_coretile_clcd = false; + bool has_coretile_hdlcd = false; + bool mux_motherboard = true; + u32 val; + int ret; + + /* + * Check if we have a CLCD or HDLCD on the core tile by checking if a + * CLCD or HDLCD is available in the root of the device tree. + */ + root = of_find_node_by_path("/"); + if (!root) + return -EINVAL; + + for_each_available_child_of_node(root, child) { + if (of_device_is_compatible(child, "arm,pl111")) { + has_coretile_clcd = true; + ct_clcd = child; + break; + } + if (of_device_is_compatible(child, "arm,hdlcd")) { + has_coretile_hdlcd = true; + break; + } + } + + /* + * If there is a coretile HDLCD and it has a driver, + * do not mux the CLCD on the motherboard to the DVI. + */ + if (has_coretile_hdlcd && IS_ENABLED(CONFIG_DRM_HDLCD)) + mux_motherboard = false; + + /* + * On the Vexpress CA9 we let the CLCD on the coretile + * take precedence, so also in this case do not mux the + * motherboard to the DVI. + */ + if (has_coretile_clcd) + mux_motherboard = false; + + if (mux_motherboard) { + dev_info(dev, "DVI muxed to motherboard CLCD\n"); + val = VEXPRESS_FPGAMUX_MOTHERBOARD; + } else if (ct_clcd == dev->of_node) { + dev_info(dev, + "DVI muxed to daughterboard 1 (core tile) CLCD\n"); + val = VEXPRESS_FPGAMUX_DAUGHTERBOARD_1; + } else { + dev_info(dev, "core tile graphics present\n"); + dev_info(dev, "this device will be deactivated\n"); + return -ENODEV; + } + + ret = regmap_write(map, 0, val); + if (ret) { + dev_err(dev, "error setting DVI muxmode\n"); + return -ENODEV; + } + + return 0; +} + +/* + * This sets up the regmap pointer that will then be retrieved by + * the detection code in pl111_versatile.c and passed in to the + * pl111_vexpress_clcd_init() function above. + */ +static int vexpress_muxfpga_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *map; + + map = devm_regmap_init_vexpress_config(&pdev->dev); + if (IS_ERR(map)) + return PTR_ERR(map); + dev_set_drvdata(dev, map); + + return 0; +} + +static const struct of_device_id vexpress_muxfpga_match[] = { + { .compatible = "arm,vexpress-muxfpga", } +}; + +static struct platform_driver vexpress_muxfpga_driver = { + .driver = { + .name = "vexpress-muxfpga", + .of_match_table = of_match_ptr(vexpress_muxfpga_match), + }, + .probe = vexpress_muxfpga_probe, +}; + +int vexpress_muxfpga_init(void) +{ + int ret; + + ret = platform_driver_register(&vexpress_muxfpga_driver); + /* -EBUSY just means this driver is already registered */ + if (ret == -EBUSY) + ret = 0; + return ret; +} diff --git a/drivers/gpu/drm/pl111/pl111_vexpress.h b/drivers/gpu/drm/pl111/pl111_vexpress.h new file mode 100644 index 000000000000..5d3681bb4c00 --- /dev/null +++ b/drivers/gpu/drm/pl111/pl111_vexpress.h @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 + +struct device; +struct pl111_drm_dev_private; +struct regmap; + +#ifdef CONFIG_ARCH_VEXPRESS + +int pl111_vexpress_clcd_init(struct device *dev, + struct pl111_drm_dev_private *priv, + struct regmap *map); + +int vexpress_muxfpga_init(void); + +#else + +static inline int pl111_vexpress_clcd_init(struct device *dev, + struct pl111_drm_dev_private *priv, + struct regmap *map) +{ + return -ENODEV; +} + +static inline int vexpress_muxfpga_init(void) +{ + return 0; +} + +#endif diff --git a/drivers/gpu/drm/qxl/qxl_cmd.c b/drivers/gpu/drm/qxl/qxl_cmd.c index 01665b98c57e..208af9f37914 100644 --- a/drivers/gpu/drm/qxl/qxl_cmd.c +++ b/drivers/gpu/drm/qxl/qxl_cmd.c @@ -339,12 +339,9 @@ int qxl_io_update_area(struct qxl_device *qdev, struct qxl_bo *surf, surface_height = surf->surf.height; if (area->left < 0 || area->top < 0 || - area->right > surface_width || area->bottom > surface_height) { - qxl_io_log(qdev, "%s: not doing area update for " - "%d, (%d,%d,%d,%d) (%d,%d)\n", __func__, surface_id, area->left, - area->top, area->right, area->bottom, surface_width, surface_height); + area->right > surface_width || area->bottom > surface_height) return -EINVAL; - } + mutex_lock(&qdev->update_area_mutex); qdev->ram_header->update_area = *area; qdev->ram_header->update_surface = surface_id; @@ -372,6 +369,7 @@ void qxl_io_flush_surfaces(struct qxl_device *qdev) void qxl_io_destroy_primary(struct qxl_device *qdev) { wait_for_io_cmd(qdev, 0, QXL_IO_DESTROY_PRIMARY_ASYNC); + qdev->primary_created = false; } void qxl_io_create_primary(struct qxl_device *qdev, @@ -397,6 +395,7 @@ void qxl_io_create_primary(struct qxl_device *qdev, create->type = QXL_SURF_TYPE_PRIMARY; wait_for_io_cmd(qdev, 0, QXL_IO_CREATE_PRIMARY_ASYNC); + qdev->primary_created = true; } void qxl_io_memslot_add(struct qxl_device *qdev, uint8_t id) @@ -405,20 +404,6 @@ void qxl_io_memslot_add(struct qxl_device *qdev, uint8_t id) wait_for_io_cmd(qdev, id, QXL_IO_MEMSLOT_ADD_ASYNC); } -void qxl_io_log(struct qxl_device *qdev, const char *fmt, ...) -{ - va_list args; - - va_start(args, fmt); - vsnprintf(qdev->ram_header->log_buf, QXL_LOG_BUF_SIZE, fmt, args); - va_end(args); - /* - * DO not do a DRM output here - this will call printk, which will - * call back into qxl for rendering (qxl_fb) - */ - outb(0, qdev->io_base + QXL_IO_LOG); -} - void qxl_io_reset(struct qxl_device *qdev) { outb(0, qdev->io_base + QXL_IO_RESET); @@ -426,19 +411,6 @@ void qxl_io_reset(struct qxl_device *qdev) void qxl_io_monitors_config(struct qxl_device *qdev) { - qxl_io_log(qdev, "%s: %d [%dx%d+%d+%d]\n", __func__, - qdev->monitors_config ? - qdev->monitors_config->count : -1, - qdev->monitors_config && qdev->monitors_config->count ? - qdev->monitors_config->heads[0].width : -1, - qdev->monitors_config && qdev->monitors_config->count ? - qdev->monitors_config->heads[0].height : -1, - qdev->monitors_config && qdev->monitors_config->count ? - qdev->monitors_config->heads[0].x : -1, - qdev->monitors_config && qdev->monitors_config->count ? - qdev->monitors_config->heads[0].y : -1 - ); - wait_for_io_cmd(qdev, 0, QXL_IO_MONITORS_CONFIG_ASYNC); } diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c index 820cbca3bf6e..b8cda9449241 100644 --- a/drivers/gpu/drm/qxl/qxl_display.c +++ b/drivers/gpu/drm/qxl/qxl_display.c @@ -48,12 +48,8 @@ static void qxl_alloc_client_monitors_config(struct qxl_device *qdev, unsigned c qdev->client_monitors_config = kzalloc( sizeof(struct qxl_monitors_config) + sizeof(struct qxl_head) * count, GFP_KERNEL); - if (!qdev->client_monitors_config) { - qxl_io_log(qdev, - "%s: allocation failure for %u heads\n", - __func__, count); + if (!qdev->client_monitors_config) return; - } } qdev->client_monitors_config->count = count; } @@ -74,12 +70,8 @@ static int qxl_display_copy_rom_client_monitors_config(struct qxl_device *qdev) num_monitors = qdev->rom->client_monitors_config.count; crc = crc32(0, (const uint8_t *)&qdev->rom->client_monitors_config, sizeof(qdev->rom->client_monitors_config)); - if (crc != qdev->rom->client_monitors_config_crc) { - qxl_io_log(qdev, "crc mismatch: have %X (%zd) != %X\n", crc, - sizeof(qdev->rom->client_monitors_config), - qdev->rom->client_monitors_config_crc); + if (crc != qdev->rom->client_monitors_config_crc) return MONITORS_CONFIG_BAD_CRC; - } if (!num_monitors) { DRM_DEBUG_KMS("no client monitors configured\n"); return status; @@ -170,12 +162,10 @@ void qxl_display_read_client_monitors_config(struct qxl_device *qdev) udelay(5); } if (status == MONITORS_CONFIG_BAD_CRC) { - qxl_io_log(qdev, "config: bad crc\n"); DRM_DEBUG_KMS("ignoring client monitors config: bad crc"); return; } if (status == MONITORS_CONFIG_UNCHANGED) { - qxl_io_log(qdev, "config: unchanged\n"); DRM_DEBUG_KMS("ignoring client monitors config: unchanged"); return; } @@ -268,6 +258,89 @@ static int qxl_add_common_modes(struct drm_connector *connector, return i - 1; } +static void qxl_send_monitors_config(struct qxl_device *qdev) +{ + int i; + + BUG_ON(!qdev->ram_header->monitors_config); + + if (qdev->monitors_config->count == 0) + return; + + for (i = 0 ; i < qdev->monitors_config->count ; ++i) { + struct qxl_head *head = &qdev->monitors_config->heads[i]; + + if (head->y > 8192 || head->x > 8192 || + head->width > 8192 || head->height > 8192) { + DRM_ERROR("head %d wrong: %dx%d+%d+%d\n", + i, head->width, head->height, + head->x, head->y); + return; + } + } + qxl_io_monitors_config(qdev); +} + +static void qxl_crtc_update_monitors_config(struct drm_crtc *crtc, + const char *reason) +{ + struct drm_device *dev = crtc->dev; + struct qxl_device *qdev = dev->dev_private; + struct qxl_crtc *qcrtc = to_qxl_crtc(crtc); + struct qxl_head head; + int oldcount, i = qcrtc->index; + + if (!qdev->primary_created) { + DRM_DEBUG_KMS("no primary surface, skip (%s)\n", reason); + return; + } + + if (!qdev->monitors_config || + qdev->monitors_config->max_allowed <= i) + return; + + head.id = i; + head.flags = 0; + oldcount = qdev->monitors_config->count; + if (crtc->state->active) { + struct drm_display_mode *mode = &crtc->mode; + head.width = mode->hdisplay; + head.height = mode->vdisplay; + head.x = crtc->x; + head.y = crtc->y; + if (qdev->monitors_config->count < i + 1) + qdev->monitors_config->count = i + 1; + } else if (i > 0) { + head.width = 0; + head.height = 0; + head.x = 0; + head.y = 0; + if (qdev->monitors_config->count == i + 1) + qdev->monitors_config->count = i; + } else { + DRM_DEBUG_KMS("inactive head 0, skip (%s)\n", reason); + return; + } + + if (head.width == qdev->monitors_config->heads[i].width && + head.height == qdev->monitors_config->heads[i].height && + head.x == qdev->monitors_config->heads[i].x && + head.y == qdev->monitors_config->heads[i].y && + oldcount == qdev->monitors_config->count) + return; + + DRM_DEBUG_KMS("head %d, %dx%d, at +%d+%d, %s (%s)\n", + i, head.width, head.height, head.x, head.y, + crtc->state->active ? "on" : "off", reason); + if (oldcount != qdev->monitors_config->count) + DRM_DEBUG_KMS("active heads %d -> %d (%d total)\n", + oldcount, qdev->monitors_config->count, + qdev->monitors_config->max_allowed); + + qdev->monitors_config->heads[i] = head; + qxl_send_monitors_config(qdev); +} + static void qxl_crtc_atomic_flush(struct drm_crtc *crtc, struct drm_crtc_state *old_crtc_state) { @@ -283,6 +356,8 @@ static void qxl_crtc_atomic_flush(struct drm_crtc *crtc, drm_crtc_send_vblank_event(crtc, event); spin_unlock_irqrestore(&dev->event_lock, flags); } + + qxl_crtc_update_monitors_config(crtc, "flush"); } static void qxl_crtc_destroy(struct drm_crtc *crtc) @@ -381,95 +456,19 @@ qxl_framebuffer_init(struct drm_device *dev, return 0; } -static bool qxl_crtc_mode_fixup(struct drm_crtc *crtc, - const struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct drm_device *dev = crtc->dev; - struct qxl_device *qdev = dev->dev_private; - - qxl_io_log(qdev, "%s: (%d,%d) => (%d,%d)\n", - __func__, - mode->hdisplay, mode->vdisplay, - adjusted_mode->hdisplay, - adjusted_mode->vdisplay); - return true; -} - -static void -qxl_send_monitors_config(struct qxl_device *qdev) -{ - int i; - - BUG_ON(!qdev->ram_header->monitors_config); - - if (qdev->monitors_config->count == 0) { - qxl_io_log(qdev, "%s: 0 monitors??\n", __func__); - return; - } - for (i = 0 ; i < qdev->monitors_config->count ; ++i) { - struct qxl_head *head = &qdev->monitors_config->heads[i]; - - if (head->y > 8192 || head->x > 8192 || - head->width > 8192 || head->height > 8192) { - DRM_ERROR("head %d wrong: %dx%d+%d+%d\n", - i, head->width, head->height, - head->x, head->y); - return; - } - } - qxl_io_monitors_config(qdev); -} - -static void qxl_monitors_config_set(struct qxl_device *qdev, - int index, - unsigned x, unsigned y, - unsigned width, unsigned height, - unsigned surf_id) -{ - DRM_DEBUG_KMS("%d:%dx%d+%d+%d\n", index, width, height, x, y); - qdev->monitors_config->heads[index].x = x; - qdev->monitors_config->heads[index].y = y; - qdev->monitors_config->heads[index].width = width; - qdev->monitors_config->heads[index].height = height; - qdev->monitors_config->heads[index].surface_id = surf_id; - -} - -static void qxl_mode_set_nofb(struct drm_crtc *crtc) -{ - struct qxl_device *qdev = crtc->dev->dev_private; - struct qxl_crtc *qcrtc = to_qxl_crtc(crtc); - struct drm_display_mode *mode = &crtc->mode; - - DRM_DEBUG("Mode set (%d,%d)\n", - mode->hdisplay, mode->vdisplay); - - qxl_monitors_config_set(qdev, qcrtc->index, 0, 0, - mode->hdisplay, mode->vdisplay, 0); - -} - static void qxl_crtc_atomic_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { - DRM_DEBUG("\n"); + qxl_crtc_update_monitors_config(crtc, "enable"); } static void qxl_crtc_atomic_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { - struct qxl_crtc *qcrtc = to_qxl_crtc(crtc); - struct qxl_device *qdev = crtc->dev->dev_private; - - qxl_monitors_config_set(qdev, qcrtc->index, 0, 0, 0, 0, 0); - - qxl_send_monitors_config(qdev); + qxl_crtc_update_monitors_config(crtc, "disable"); } static const struct drm_crtc_helper_funcs qxl_crtc_helper_funcs = { - .mode_fixup = qxl_crtc_mode_fixup, - .mode_set_nofb = qxl_mode_set_nofb, .atomic_flush = qxl_crtc_atomic_flush, .atomic_enable = qxl_crtc_atomic_enable, .atomic_disable = qxl_crtc_atomic_disable, @@ -613,12 +612,6 @@ static void qxl_primary_atomic_disable(struct drm_plane *plane, } } -static int qxl_plane_atomic_check(struct drm_plane *plane, - struct drm_plane_state *state) -{ - return 0; -} - static void qxl_cursor_atomic_update(struct drm_plane *plane, struct drm_plane_state *old_state) { @@ -824,7 +817,6 @@ static const uint32_t qxl_cursor_plane_formats[] = { }; static const struct drm_plane_helper_funcs qxl_cursor_helper_funcs = { - .atomic_check = qxl_plane_atomic_check, .atomic_update = qxl_cursor_atomic_update, .atomic_disable = qxl_cursor_atomic_disable, .prepare_fb = qxl_plane_prepare_fb, @@ -949,81 +941,6 @@ free_mem: return r; } -static void qxl_enc_dpms(struct drm_encoder *encoder, int mode) -{ - DRM_DEBUG("\n"); -} - -static void qxl_enc_prepare(struct drm_encoder *encoder) -{ - DRM_DEBUG("\n"); -} - -static void qxl_write_monitors_config_for_encoder(struct qxl_device *qdev, - struct drm_encoder *encoder) -{ - int i; - struct qxl_output *output = drm_encoder_to_qxl_output(encoder); - struct qxl_head *head; - struct drm_display_mode *mode; - - BUG_ON(!encoder); - /* TODO: ugly, do better */ - i = output->index; - if (!qdev->monitors_config || - qdev->monitors_config->max_allowed <= i) { - DRM_ERROR( - "head number too large or missing monitors config: %p, %d", - qdev->monitors_config, - qdev->monitors_config ? - qdev->monitors_config->max_allowed : -1); - return; - } - if (!encoder->crtc) { - DRM_ERROR("missing crtc on encoder %p\n", encoder); - return; - } - if (i != 0) - DRM_DEBUG("missing for multiple monitors: no head holes\n"); - head = &qdev->monitors_config->heads[i]; - head->id = i; - if (encoder->crtc->enabled) { - mode = &encoder->crtc->mode; - head->width = mode->hdisplay; - head->height = mode->vdisplay; - head->x = encoder->crtc->x; - head->y = encoder->crtc->y; - if (qdev->monitors_config->count < i + 1) - qdev->monitors_config->count = i + 1; - } else { - head->width = 0; - head->height = 0; - head->x = 0; - head->y = 0; - } - DRM_DEBUG_KMS("setting head %d to +%d+%d %dx%d out of %d\n", - i, head->x, head->y, head->width, head->height, qdev->monitors_config->count); - head->flags = 0; - /* TODO - somewhere else to call this for multiple monitors - * (config_commit?) */ - qxl_send_monitors_config(qdev); -} - -static void qxl_enc_commit(struct drm_encoder *encoder) -{ - struct qxl_device *qdev = encoder->dev->dev_private; - - qxl_write_monitors_config_for_encoder(qdev, encoder); - DRM_DEBUG("\n"); -} - -static void qxl_enc_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - DRM_DEBUG("\n"); -} - static int qxl_conn_get_modes(struct drm_connector *connector) { unsigned pwidth = 1024; @@ -1069,10 +986,6 @@ static struct drm_encoder *qxl_best_encoder(struct drm_connector *connector) static const struct drm_encoder_helper_funcs qxl_enc_helper_funcs = { - .dpms = qxl_enc_dpms, - .prepare = qxl_enc_prepare, - .mode_set = qxl_enc_mode_set, - .commit = qxl_enc_commit, }; static const struct drm_connector_helper_funcs qxl_connector_helper_funcs = { @@ -1100,21 +1013,11 @@ static enum drm_connector_status qxl_conn_detect( qxl_head_enabled(&qdev->client_monitors_config->heads[output->index]); DRM_DEBUG("#%d connected: %d\n", output->index, connected); - if (!connected) - qxl_monitors_config_set(qdev, output->index, 0, 0, 0, 0, 0); return connected ? connector_status_connected : connector_status_disconnected; } -static int qxl_conn_set_property(struct drm_connector *connector, - struct drm_property *property, - uint64_t value) -{ - DRM_DEBUG("\n"); - return 0; -} - static void qxl_conn_destroy(struct drm_connector *connector) { struct qxl_output *qxl_output = @@ -1129,7 +1032,6 @@ static const struct drm_connector_funcs qxl_connector_funcs = { .dpms = drm_helper_connector_dpms, .detect = qxl_conn_detect, .fill_modes = drm_helper_probe_single_connector_modes, - .set_property = qxl_conn_set_property, .destroy = qxl_conn_destroy, .reset = drm_atomic_helper_connector_reset, .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, diff --git a/drivers/gpu/drm/qxl/qxl_drv.h b/drivers/gpu/drm/qxl/qxl_drv.h index 864b456080c4..01220d386b0a 100644 --- a/drivers/gpu/drm/qxl/qxl_drv.h +++ b/drivers/gpu/drm/qxl/qxl_drv.h @@ -299,9 +299,6 @@ struct qxl_device { int monitors_config_height; }; -/* forward declaration for QXL_INFO_IO */ -__printf(2,3) void qxl_io_log(struct qxl_device *qdev, const char *fmt, ...); - extern const struct drm_ioctl_desc qxl_ioctls[]; extern int qxl_max_ioctl; diff --git a/drivers/gpu/drm/qxl/qxl_fb.c b/drivers/gpu/drm/qxl/qxl_fb.c index 338891401f35..9a6752606079 100644 --- a/drivers/gpu/drm/qxl/qxl_fb.c +++ b/drivers/gpu/drm/qxl/qxl_fb.c @@ -185,8 +185,6 @@ static int qxlfb_framebuffer_dirty(struct drm_framebuffer *fb, /* * we are using a shadow draw buffer, at qdev->surface0_shadow */ - qxl_io_log(qdev, "dirty x[%d, %d], y[%d, %d]\n", clips->x1, clips->x2, - clips->y1, clips->y2); image->dx = clips->x1; image->dy = clips->y1; image->width = clips->x2 - clips->x1; diff --git a/drivers/gpu/drm/qxl/qxl_irq.c b/drivers/gpu/drm/qxl/qxl_irq.c index 23a40106ab53..3bb31add6350 100644 --- a/drivers/gpu/drm/qxl/qxl_irq.c +++ b/drivers/gpu/drm/qxl/qxl_irq.c @@ -57,10 +57,9 @@ irqreturn_t qxl_irq_handler(int irq, void *arg) * to avoid endless loops). */ qdev->irq_received_error++; - qxl_io_log(qdev, "%s: driver is in bug mode.\n", __func__); + DRM_WARN("driver is in bug mode\n"); } if (pending & QXL_INTERRUPT_CLIENT_MONITORS_CONFIG) { - qxl_io_log(qdev, "QXL_INTERRUPT_CLIENT_MONITORS_CONFIG\n"); schedule_work(&qdev->client_monitors_config_work); } qdev->ram_header->int_mask = QXL_INTERRUPT_MASK; diff --git a/drivers/gpu/drm/qxl/qxl_ttm.c b/drivers/gpu/drm/qxl/qxl_ttm.c index ee2340e31f06..86a1fb32f6db 100644 --- a/drivers/gpu/drm/qxl/qxl_ttm.c +++ b/drivers/gpu/drm/qxl/qxl_ttm.c @@ -105,16 +105,16 @@ static void qxl_ttm_global_fini(struct qxl_device *qdev) static struct vm_operations_struct qxl_ttm_vm_ops; static const struct vm_operations_struct *ttm_vm_ops; -static int qxl_ttm_fault(struct vm_fault *vmf) +static vm_fault_t qxl_ttm_fault(struct vm_fault *vmf) { struct ttm_buffer_object *bo; - int r; + vm_fault_t ret; bo = (struct ttm_buffer_object *)vmf->vma->vm_private_data; if (bo == NULL) return VM_FAULT_NOPAGE; - r = ttm_vm_ops->fault(vmf); - return r; + ret = ttm_vm_ops->fault(vmf); + return ret; } int qxl_mmap(struct file *filp, struct vm_area_struct *vma) diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index fe3faa7c38d9..2121345a61af 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -76,6 +76,9 @@ #define VOP_WIN_GET_YRGBADDR(vop, win) \ vop_readl(vop, win->base + win->phy->yrgb_mst.offset) +#define VOP_WIN_TO_INDEX(vop_win) \ + ((vop_win) - (vop_win)->vop->win) + #define to_vop(x) container_of(x, struct vop, crtc) #define to_vop_win(x) container_of(x, struct vop_win, base) @@ -708,6 +711,7 @@ static void vop_plane_atomic_update(struct drm_plane *plane, dma_addr_t dma_addr; uint32_t val; bool rb_swap; + int win_index = VOP_WIN_TO_INDEX(vop_win); int format; /* @@ -777,7 +781,14 @@ static void vop_plane_atomic_update(struct drm_plane *plane, rb_swap = has_rb_swapped(fb->format->format); VOP_WIN_SET(vop, win, rb_swap, rb_swap); - if (fb->format->has_alpha) { + /* + * Blending win0 with the background color doesn't seem to work + * correctly. We only get the background color, no matter the contents + * of the win0 framebuffer. However, blending pre-multiplied color + * with the default opaque black default background color is a no-op, + * so we can just disable blending to get the correct result. + */ + if (fb->format->has_alpha && win_index > 0) { VOP_WIN_SET(vop, win, dst_alpha_ctl, DST_FACTOR_M0(ALPHA_SRC_INVERSE)); val = SRC_ALPHA_EN(1) | SRC_COLOR_M0(ALPHA_SRC_PRE_MUL) | diff --git a/drivers/gpu/drm/selftests/Makefile b/drivers/gpu/drm/selftests/Makefile index 4aebfc7f27d4..9fc349fa18e9 100644 --- a/drivers/gpu/drm/selftests/Makefile +++ b/drivers/gpu/drm/selftests/Makefile @@ -1 +1 @@ -obj-$(CONFIG_DRM_DEBUG_MM_SELFTEST) += test-drm_mm.o +obj-$(CONFIG_DRM_DEBUG_SELFTEST) += test-drm_mm.o test-drm-helper.o diff --git a/drivers/gpu/drm/selftests/drm_helper_selftests.h b/drivers/gpu/drm/selftests/drm_helper_selftests.h new file mode 100644 index 000000000000..9771290ed228 --- /dev/null +++ b/drivers/gpu/drm/selftests/drm_helper_selftests.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* List each unit test as selftest(name, function) + * + * The name is used as both an enum and expanded as igt__name to create + * a module parameter. It must be unique and legal for a C identifier. + * + * Tests are executed in order by igt/drm_selftests_helper + */ +selftest(check_plane_state, igt_check_plane_state) diff --git a/drivers/gpu/drm/selftests/test-drm-helper.c b/drivers/gpu/drm/selftests/test-drm-helper.c new file mode 100644 index 000000000000..a015712b43e8 --- /dev/null +++ b/drivers/gpu/drm/selftests/test-drm-helper.c @@ -0,0 +1,247 @@ +/* + * Test cases for the drm_kms_helper functions + */ + +#define pr_fmt(fmt) "drm_kms_helper: " fmt + +#include <linux/module.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_plane_helper.h> +#include <drm/drm_modes.h> + +#define TESTS "drm_helper_selftests.h" +#include "drm_selftest.h" + +#define FAIL(test, msg, ...) \ + do { \ + if (test) { \ + pr_err("%s/%u: " msg, __FUNCTION__, __LINE__, ##__VA_ARGS__); \ + return -EINVAL; \ + } \ + } while (0) + +#define FAIL_ON(x) FAIL((x), "%s", "FAIL_ON(" __stringify(x) ")\n") + +static void set_src(struct drm_plane_state *plane_state, + unsigned src_x, unsigned src_y, + unsigned src_w, unsigned src_h) +{ + plane_state->src_x = src_x; + plane_state->src_y = src_y; + plane_state->src_w = src_w; + plane_state->src_h = src_h; +} + +static bool check_src_eq(struct drm_plane_state *plane_state, + unsigned src_x, unsigned src_y, + unsigned src_w, unsigned src_h) +{ + if (plane_state->src.x1 < 0) { + pr_err("src x coordinate %x should never be below 0.\n", plane_state->src.x1); + drm_rect_debug_print("src: ", &plane_state->src, true); + return false; + } + if (plane_state->src.y1 < 0) { + pr_err("src y coordinate %x should never be below 0.\n", plane_state->src.y1); + drm_rect_debug_print("src: ", &plane_state->src, true); + return false; + } + + if (plane_state->src.x1 != src_x || + plane_state->src.y1 != src_y || + drm_rect_width(&plane_state->src) != src_w || + drm_rect_height(&plane_state->src) != src_h) { + drm_rect_debug_print("src: ", &plane_state->src, true); + return false; + } + + return true; +} + +static void set_crtc(struct drm_plane_state *plane_state, + int crtc_x, int crtc_y, + unsigned crtc_w, unsigned crtc_h) +{ + plane_state->crtc_x = crtc_x; + plane_state->crtc_y = crtc_y; + plane_state->crtc_w = crtc_w; + plane_state->crtc_h = crtc_h; +} + +static bool check_crtc_eq(struct drm_plane_state *plane_state, + int crtc_x, int crtc_y, + unsigned crtc_w, unsigned crtc_h) +{ + if (plane_state->dst.x1 != crtc_x || + plane_state->dst.y1 != crtc_y || + drm_rect_width(&plane_state->dst) != crtc_w || + drm_rect_height(&plane_state->dst) != crtc_h) { + drm_rect_debug_print("dst: ", &plane_state->dst, false); + + return false; + } + + return true; +} + +static int igt_check_plane_state(void *ignored) +{ + int ret; + + const struct drm_crtc_state crtc_state = { + .crtc = ZERO_SIZE_PTR, + .enable = true, + .active = true, + .mode = { + DRM_MODE("1024x768", 0, 65000, 1024, 1048, + 1184, 1344, 0, 768, 771, 777, 806, 0, + DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) + }, + }; + struct drm_framebuffer fb = { + .width = 2048, + .height = 2048 + }; + struct drm_plane_state plane_state = { + .crtc = ZERO_SIZE_PTR, + .fb = &fb, + .rotation = DRM_MODE_ROTATE_0 + }; + + /* Simple clipping, no scaling. */ + set_src(&plane_state, 0, 0, fb.width << 16, fb.height << 16); + set_crtc(&plane_state, 0, 0, fb.width, fb.height); + ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state, + DRM_PLANE_HELPER_NO_SCALING, + DRM_PLANE_HELPER_NO_SCALING, + false, false); + FAIL(ret < 0, "Simple clipping check should pass\n"); + FAIL_ON(!plane_state.visible); + FAIL_ON(!check_src_eq(&plane_state, 0, 0, 1024 << 16, 768 << 16)); + FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768)); + + /* Rotated clipping + reflection, no scaling. */ + plane_state.rotation = DRM_MODE_ROTATE_90 | DRM_MODE_REFLECT_X; + ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state, + DRM_PLANE_HELPER_NO_SCALING, + DRM_PLANE_HELPER_NO_SCALING, + false, false); + FAIL(ret < 0, "Rotated clipping check should pass\n"); + FAIL_ON(!plane_state.visible); + FAIL_ON(!check_src_eq(&plane_state, 0, 0, 768 << 16, 1024 << 16)); + FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768)); + plane_state.rotation = DRM_MODE_ROTATE_0; + + /* Check whether positioning works correctly. */ + set_src(&plane_state, 0, 0, 1023 << 16, 767 << 16); + set_crtc(&plane_state, 0, 0, 1023, 767); + ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state, + DRM_PLANE_HELPER_NO_SCALING, + DRM_PLANE_HELPER_NO_SCALING, + false, false); + FAIL(!ret, "Should not be able to position on the crtc with can_position=false\n"); + + ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state, + DRM_PLANE_HELPER_NO_SCALING, + DRM_PLANE_HELPER_NO_SCALING, + true, false); + FAIL(ret < 0, "Simple positioning should work\n"); + FAIL_ON(!plane_state.visible); + FAIL_ON(!check_src_eq(&plane_state, 0, 0, 1023 << 16, 767 << 16)); + FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1023, 767)); + + /* Simple scaling tests. */ + set_src(&plane_state, 0, 0, 512 << 16, 384 << 16); + set_crtc(&plane_state, 0, 0, 1024, 768); + ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state, + 0x8001, + DRM_PLANE_HELPER_NO_SCALING, + false, false); + FAIL(!ret, "Upscaling out of range should fail.\n"); + ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state, + 0x8000, + DRM_PLANE_HELPER_NO_SCALING, + false, false); + FAIL(ret < 0, "Upscaling exactly 2x should work\n"); + FAIL_ON(!plane_state.visible); + FAIL_ON(!check_src_eq(&plane_state, 0, 0, 512 << 16, 384 << 16)); + FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768)); + + set_src(&plane_state, 0, 0, 2048 << 16, 1536 << 16); + ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state, + DRM_PLANE_HELPER_NO_SCALING, + 0x1ffff, false, false); + FAIL(!ret, "Downscaling out of range should fail.\n"); + ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state, + DRM_PLANE_HELPER_NO_SCALING, + 0x20000, false, false); + FAIL(ret < 0, "Should succeed with exact scaling limit\n"); + FAIL_ON(!plane_state.visible); + FAIL_ON(!check_src_eq(&plane_state, 0, 0, 2048 << 16, 1536 << 16)); + FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768)); + + /* Testing rounding errors. */ + set_src(&plane_state, 0, 0, 0x40001, 0x40001); + set_crtc(&plane_state, 1022, 766, 4, 4); + ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state, + DRM_PLANE_HELPER_NO_SCALING, + 0x10001, + true, false); + FAIL(ret < 0, "Should succeed by clipping to exact multiple"); + FAIL_ON(!plane_state.visible); + FAIL_ON(!check_src_eq(&plane_state, 0, 0, 2 << 16, 2 << 16)); + FAIL_ON(!check_crtc_eq(&plane_state, 1022, 766, 2, 2)); + + set_src(&plane_state, 0x20001, 0x20001, 0x4040001, 0x3040001); + set_crtc(&plane_state, -2, -2, 1028, 772); + ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state, + DRM_PLANE_HELPER_NO_SCALING, + 0x10001, + false, false); + FAIL(ret < 0, "Should succeed by clipping to exact multiple"); + FAIL_ON(!plane_state.visible); + FAIL_ON(!check_src_eq(&plane_state, 0x40002, 0x40002, 1024 << 16, 768 << 16)); + FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768)); + + set_src(&plane_state, 0, 0, 0x3ffff, 0x3ffff); + set_crtc(&plane_state, 1022, 766, 4, 4); + ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state, + 0xffff, + DRM_PLANE_HELPER_NO_SCALING, + true, false); + FAIL(ret < 0, "Should succeed by clipping to exact multiple"); + FAIL_ON(!plane_state.visible); + /* Should not be rounded to 0x20001, which would be upscaling. */ + FAIL_ON(!check_src_eq(&plane_state, 0, 0, 2 << 16, 2 << 16)); + FAIL_ON(!check_crtc_eq(&plane_state, 1022, 766, 2, 2)); + + set_src(&plane_state, 0x1ffff, 0x1ffff, 0x403ffff, 0x303ffff); + set_crtc(&plane_state, -2, -2, 1028, 772); + ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state, + 0xffff, + DRM_PLANE_HELPER_NO_SCALING, + false, false); + FAIL(ret < 0, "Should succeed by clipping to exact multiple"); + FAIL_ON(!plane_state.visible); + FAIL_ON(!check_src_eq(&plane_state, 0x3fffe, 0x3fffe, 1024 << 16, 768 << 16)); + FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768)); + + return 0; +} + +#include "drm_selftest.c" + +static int __init test_drm_helper_init(void) +{ + int err; + + err = run_selftests(selftests, ARRAY_SIZE(selftests), NULL); + + return err > 0 ? 0 : err; +} + +module_init(test_drm_helper_init); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/sti/sti_crtc.c b/drivers/gpu/drm/sti/sti_crtc.c index 21e50d7b1f86..5824e6aca8f4 100644 --- a/drivers/gpu/drm/sti/sti_crtc.c +++ b/drivers/gpu/drm/sti/sti_crtc.c @@ -357,7 +357,7 @@ int sti_crtc_init(struct drm_device *drm_dev, struct sti_mixer *mixer, res = drm_crtc_init_with_planes(drm_dev, crtc, primary, cursor, &sti_crtc_funcs, NULL); if (res) { - DRM_ERROR("Can't initialze CRTC\n"); + DRM_ERROR("Can't initialize CRTC\n"); return -EINVAL; } diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c index e3121d9e4230..d997a6014d6c 100644 --- a/drivers/gpu/drm/stm/ltdc.c +++ b/drivers/gpu/drm/stm/ltdc.c @@ -445,6 +445,43 @@ static void ltdc_crtc_atomic_disable(struct drm_crtc *crtc, reg_set(ldev->regs, LTDC_SRCR, SRCR_IMR); } +#define CLK_TOLERANCE_HZ 50 + +static enum drm_mode_status +ltdc_crtc_mode_valid(struct drm_crtc *crtc, + const struct drm_display_mode *mode) +{ + struct ltdc_device *ldev = crtc_to_ltdc(crtc); + int target = mode->clock * 1000; + int target_min = target - CLK_TOLERANCE_HZ; + int target_max = target + CLK_TOLERANCE_HZ; + int result; + + /* + * Accept all "preferred" modes: + * - this is important for panels because panel clock tolerances are + * bigger than hdmi ones and there is no reason to not accept them + * (the fps may vary a little but it is not a problem). + * - the hdmi preferred mode will be accepted too, but userland will + * be able to use others hdmi "valid" modes if necessary. + */ + if (mode->type & DRM_MODE_TYPE_PREFERRED) + return MODE_OK; + + result = clk_round_rate(ldev->pixel_clk, target); + + DRM_DEBUG_DRIVER("clk rate target %d, available %d\n", target, result); + + /* + * Filter modes according to the clock value, particularly useful for + * hdmi modes that require precise pixel clocks. + */ + if (result < target_min || result > target_max) + return MODE_CLOCK_RANGE; + + return MODE_OK; +} + static bool ltdc_crtc_mode_fixup(struct drm_crtc *crtc, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) @@ -559,6 +596,7 @@ static void ltdc_crtc_atomic_flush(struct drm_crtc *crtc, } static const struct drm_crtc_helper_funcs ltdc_crtc_helper_funcs = { + .mode_valid = ltdc_crtc_mode_valid, .mode_fixup = ltdc_crtc_mode_fixup, .mode_set_nofb = ltdc_crtc_mode_set_nofb, .atomic_flush = ltdc_crtc_atomic_flush, @@ -822,13 +860,13 @@ static struct drm_plane *ltdc_plane_create(struct drm_device *ddev, plane = devm_kzalloc(dev, sizeof(*plane), GFP_KERNEL); if (!plane) - return 0; + return NULL; ret = drm_universal_plane_init(ddev, plane, possible_crtcs, <dc_plane_funcs, formats, nb_fmt, NULL, type, NULL); if (ret < 0) - return 0; + return NULL; drm_plane_helper_add(plane, <dc_plane_helper_funcs); @@ -987,14 +1025,13 @@ int ltdc_load(struct drm_device *ddev) &bridge[i]); /* - * If at least one endpoint is ready, continue probing, - * else if at least one endpoint is -EPROBE_DEFER and - * there is no previous ready endpoints, defer probing. + * If at least one endpoint is -EPROBE_DEFER, defer probing, + * else if at least one endpoint is ready, continue probing. */ - if (!ret) + if (ret == -EPROBE_DEFER) + return ret; + else if (!ret) endpoint_not_ready = 0; - else if (ret == -EPROBE_DEFER && endpoint_not_ready) - endpoint_not_ready = -EPROBE_DEFER; } if (endpoint_not_ready) diff --git a/drivers/gpu/drm/tinydrm/mi0283qt.c b/drivers/gpu/drm/tinydrm/mi0283qt.c index d5ef65179c16..015d03f2acba 100644 --- a/drivers/gpu/drm/tinydrm/mi0283qt.c +++ b/drivers/gpu/drm/tinydrm/mi0283qt.c @@ -85,24 +85,6 @@ static void mi0283qt_enable(struct drm_simple_display_pipe *pipe, /* Memory Access Control */ mipi_dbi_command(mipi, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT); - switch (mipi->rotation) { - default: - addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY | - ILI9341_MADCTL_MX; - break; - case 90: - addr_mode = ILI9341_MADCTL_MY; - break; - case 180: - addr_mode = ILI9341_MADCTL_MV; - break; - case 270: - addr_mode = ILI9341_MADCTL_MX; - break; - } - addr_mode |= ILI9341_MADCTL_BGR; - mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode); - /* Frame Rate */ mipi_dbi_command(mipi, ILI9341_FRMCTR1, 0x00, 0x1b); @@ -128,6 +110,29 @@ static void mi0283qt_enable(struct drm_simple_display_pipe *pipe, msleep(100); out_enable: + /* The PiTFT (ili9340) has a hardware reset circuit that + * resets only on power-on and not on each reboot through + * a gpio like the rpi-display does. + * As a result, we need to always apply the rotation value + * regardless of the display "on/off" state. + */ + switch (mipi->rotation) { + default: + addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY | + ILI9341_MADCTL_MX; + break; + case 90: + addr_mode = ILI9341_MADCTL_MY; + break; + case 180: + addr_mode = ILI9341_MADCTL_MV; + break; + case 270: + addr_mode = ILI9341_MADCTL_MX; + break; + } + addr_mode |= ILI9341_MADCTL_BGR; + mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode); mipi_dbi_enable_flush(mipi, crtc_state, plane_state); } diff --git a/drivers/gpu/drm/v3d/Kconfig b/drivers/gpu/drm/v3d/Kconfig new file mode 100644 index 000000000000..a0c0259355bd --- /dev/null +++ b/drivers/gpu/drm/v3d/Kconfig @@ -0,0 +1,9 @@ +config DRM_V3D + tristate "Broadcom V3D 3.x and newer" + depends on ARCH_BCM || ARCH_BCMSTB || COMPILE_TEST + depends on DRM + depends on COMMON_CLK + select DRM_SCHED + help + Choose this option if you have a system that has a Broadcom + V3D 3.x or newer GPU, such as BCM7268. diff --git a/drivers/gpu/drm/v3d/Makefile b/drivers/gpu/drm/v3d/Makefile new file mode 100644 index 000000000000..34446e1de64f --- /dev/null +++ b/drivers/gpu/drm/v3d/Makefile @@ -0,0 +1,18 @@ +# Please keep these build lists sorted! + +# core driver code +v3d-y := \ + v3d_bo.o \ + v3d_drv.o \ + v3d_fence.o \ + v3d_gem.o \ + v3d_irq.o \ + v3d_mmu.o \ + v3d_trace_points.o \ + v3d_sched.o + +v3d-$(CONFIG_DEBUG_FS) += v3d_debugfs.o + +obj-$(CONFIG_DRM_V3D) += v3d.o + +CFLAGS_v3d_trace_points.o := -I$(src) diff --git a/drivers/gpu/drm/v3d/v3d_bo.c b/drivers/gpu/drm/v3d/v3d_bo.c new file mode 100644 index 000000000000..7b1e2a549a71 --- /dev/null +++ b/drivers/gpu/drm/v3d/v3d_bo.c @@ -0,0 +1,389 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2015-2018 Broadcom */ + +/** + * DOC: V3D GEM BO management support + * + * Compared to VC4 (V3D 2.x), V3D 3.3 introduces an MMU between the + * GPU and the bus, allowing us to use shmem objects for our storage + * instead of CMA. + * + * Physically contiguous objects may still be imported to V3D, but the + * driver doesn't allocate physically contiguous objects on its own. + * Display engines requiring physically contiguous allocations should + * look into Mesa's "renderonly" support (as used by the Mesa pl111 + * driver) for an example of how to integrate with V3D. + * + * Long term, we should support evicting pages from the MMU when under + * memory pressure (thus the v3d_bo_get_pages() refcounting), but + * that's not a high priority since our systems tend to not have swap. + */ + +#include <linux/dma-buf.h> +#include <linux/pfn_t.h> + +#include "v3d_drv.h" +#include "uapi/drm/v3d_drm.h" + +/* Pins the shmem pages, fills in the .pages and .sgt fields of the BO, and maps + * it for DMA. + */ +static int +v3d_bo_get_pages(struct v3d_bo *bo) +{ + struct drm_gem_object *obj = &bo->base; + struct drm_device *dev = obj->dev; + int npages = obj->size >> PAGE_SHIFT; + int ret = 0; + + mutex_lock(&bo->lock); + if (bo->pages_refcount++ != 0) + goto unlock; + + if (!obj->import_attach) { + bo->pages = drm_gem_get_pages(obj); + if (IS_ERR(bo->pages)) { + ret = PTR_ERR(bo->pages); + goto unlock; + } + + bo->sgt = drm_prime_pages_to_sg(bo->pages, npages); + if (IS_ERR(bo->sgt)) { + ret = PTR_ERR(bo->sgt); + goto put_pages; + } + + /* Map the pages for use by the GPU. */ + dma_map_sg(dev->dev, bo->sgt->sgl, + bo->sgt->nents, DMA_BIDIRECTIONAL); + } else { + bo->pages = kcalloc(npages, sizeof(*bo->pages), GFP_KERNEL); + if (!bo->pages) + goto put_pages; + + drm_prime_sg_to_page_addr_arrays(bo->sgt, bo->pages, + NULL, npages); + + /* Note that dma-bufs come in mapped. */ + } + + mutex_unlock(&bo->lock); + + return 0; + +put_pages: + drm_gem_put_pages(obj, bo->pages, true, true); + bo->pages = NULL; +unlock: + bo->pages_refcount--; + mutex_unlock(&bo->lock); + return ret; +} + +static void +v3d_bo_put_pages(struct v3d_bo *bo) +{ + struct drm_gem_object *obj = &bo->base; + + mutex_lock(&bo->lock); + if (--bo->pages_refcount == 0) { + if (!obj->import_attach) { + dma_unmap_sg(obj->dev->dev, bo->sgt->sgl, + bo->sgt->nents, DMA_BIDIRECTIONAL); + sg_free_table(bo->sgt); + kfree(bo->sgt); + drm_gem_put_pages(obj, bo->pages, true, true); + } else { + kfree(bo->pages); + } + } + mutex_unlock(&bo->lock); +} + +static struct v3d_bo *v3d_bo_create_struct(struct drm_device *dev, + size_t unaligned_size) +{ + struct v3d_dev *v3d = to_v3d_dev(dev); + struct drm_gem_object *obj; + struct v3d_bo *bo; + size_t size = roundup(unaligned_size, PAGE_SIZE); + int ret; + + if (size == 0) + return ERR_PTR(-EINVAL); + + bo = kzalloc(sizeof(*bo), GFP_KERNEL); + if (!bo) + return ERR_PTR(-ENOMEM); + obj = &bo->base; + + INIT_LIST_HEAD(&bo->vmas); + INIT_LIST_HEAD(&bo->unref_head); + mutex_init(&bo->lock); + + ret = drm_gem_object_init(dev, obj, size); + if (ret) + goto free_bo; + + spin_lock(&v3d->mm_lock); + ret = drm_mm_insert_node_generic(&v3d->mm, &bo->node, + obj->size >> PAGE_SHIFT, + GMP_GRANULARITY >> PAGE_SHIFT, 0, 0); + spin_unlock(&v3d->mm_lock); + if (ret) + goto free_obj; + + return bo; + +free_obj: + drm_gem_object_release(obj); +free_bo: + kfree(bo); + return ERR_PTR(ret); +} + +struct v3d_bo *v3d_bo_create(struct drm_device *dev, struct drm_file *file_priv, + size_t unaligned_size) +{ + struct v3d_dev *v3d = to_v3d_dev(dev); + struct drm_gem_object *obj; + struct v3d_bo *bo; + int ret; + + bo = v3d_bo_create_struct(dev, unaligned_size); + if (IS_ERR(bo)) + return bo; + obj = &bo->base; + + bo->resv = &bo->_resv; + reservation_object_init(bo->resv); + + ret = v3d_bo_get_pages(bo); + if (ret) + goto free_mm; + + v3d_mmu_insert_ptes(bo); + + mutex_lock(&v3d->bo_lock); + v3d->bo_stats.num_allocated++; + v3d->bo_stats.pages_allocated += obj->size >> PAGE_SHIFT; + mutex_unlock(&v3d->bo_lock); + + return bo; + +free_mm: + spin_lock(&v3d->mm_lock); + drm_mm_remove_node(&bo->node); + spin_unlock(&v3d->mm_lock); + + drm_gem_object_release(obj); + kfree(bo); + return ERR_PTR(ret); +} + +/* Called DRM core on the last userspace/kernel unreference of the + * BO. + */ +void v3d_free_object(struct drm_gem_object *obj) +{ + struct v3d_dev *v3d = to_v3d_dev(obj->dev); + struct v3d_bo *bo = to_v3d_bo(obj); + + mutex_lock(&v3d->bo_lock); + v3d->bo_stats.num_allocated--; + v3d->bo_stats.pages_allocated -= obj->size >> PAGE_SHIFT; + mutex_unlock(&v3d->bo_lock); + + reservation_object_fini(&bo->_resv); + + v3d_bo_put_pages(bo); + + if (obj->import_attach) + drm_prime_gem_destroy(obj, bo->sgt); + + v3d_mmu_remove_ptes(bo); + spin_lock(&v3d->mm_lock); + drm_mm_remove_node(&bo->node); + spin_unlock(&v3d->mm_lock); + + mutex_destroy(&bo->lock); + + drm_gem_object_release(obj); + kfree(bo); +} + +struct reservation_object *v3d_prime_res_obj(struct drm_gem_object *obj) +{ + struct v3d_bo *bo = to_v3d_bo(obj); + + return bo->resv; +} + +static void +v3d_set_mmap_vma_flags(struct vm_area_struct *vma) +{ + vma->vm_flags &= ~VM_PFNMAP; + vma->vm_flags |= VM_MIXEDMAP; + vma->vm_page_prot = pgprot_writecombine(vm_get_page_prot(vma->vm_flags)); +} + +int v3d_gem_fault(struct vm_fault *vmf) +{ + struct vm_area_struct *vma = vmf->vma; + struct drm_gem_object *obj = vma->vm_private_data; + struct v3d_bo *bo = to_v3d_bo(obj); + unsigned long pfn; + pgoff_t pgoff; + int ret; + + /* We don't use vmf->pgoff since that has the fake offset: */ + pgoff = (vmf->address - vma->vm_start) >> PAGE_SHIFT; + pfn = page_to_pfn(bo->pages[pgoff]); + + ret = vm_insert_mixed(vma, vmf->address, __pfn_to_pfn_t(pfn, PFN_DEV)); + + switch (ret) { + case -EAGAIN: + case 0: + case -ERESTARTSYS: + case -EINTR: + case -EBUSY: + /* + * EBUSY is ok: this just means that another thread + * already did the job. + */ + return VM_FAULT_NOPAGE; + case -ENOMEM: + return VM_FAULT_OOM; + default: + return VM_FAULT_SIGBUS; + } +} + +int v3d_mmap(struct file *filp, struct vm_area_struct *vma) +{ + int ret; + + ret = drm_gem_mmap(filp, vma); + if (ret) + return ret; + + v3d_set_mmap_vma_flags(vma); + + return ret; +} + +int v3d_prime_mmap(struct drm_gem_object *obj, struct vm_area_struct *vma) +{ + int ret; + + ret = drm_gem_mmap_obj(obj, obj->size, vma); + if (ret < 0) + return ret; + + v3d_set_mmap_vma_flags(vma); + + return 0; +} + +struct sg_table * +v3d_prime_get_sg_table(struct drm_gem_object *obj) +{ + struct v3d_bo *bo = to_v3d_bo(obj); + int npages = obj->size >> PAGE_SHIFT; + + return drm_prime_pages_to_sg(bo->pages, npages); +} + +struct drm_gem_object * +v3d_prime_import_sg_table(struct drm_device *dev, + struct dma_buf_attachment *attach, + struct sg_table *sgt) +{ + struct drm_gem_object *obj; + struct v3d_bo *bo; + + bo = v3d_bo_create_struct(dev, attach->dmabuf->size); + if (IS_ERR(bo)) + return ERR_CAST(bo); + obj = &bo->base; + + bo->resv = attach->dmabuf->resv; + + bo->sgt = sgt; + v3d_bo_get_pages(bo); + + v3d_mmu_insert_ptes(bo); + + return obj; +} + +int v3d_create_bo_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_v3d_create_bo *args = data; + struct v3d_bo *bo = NULL; + int ret; + + if (args->flags != 0) { + DRM_INFO("unknown create_bo flags: %d\n", args->flags); + return -EINVAL; + } + + bo = v3d_bo_create(dev, file_priv, PAGE_ALIGN(args->size)); + if (IS_ERR(bo)) + return PTR_ERR(bo); + + args->offset = bo->node.start << PAGE_SHIFT; + + ret = drm_gem_handle_create(file_priv, &bo->base, &args->handle); + drm_gem_object_put_unlocked(&bo->base); + + return ret; +} + +int v3d_mmap_bo_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_v3d_mmap_bo *args = data; + struct drm_gem_object *gem_obj; + int ret; + + if (args->flags != 0) { + DRM_INFO("unknown mmap_bo flags: %d\n", args->flags); + return -EINVAL; + } + + gem_obj = drm_gem_object_lookup(file_priv, args->handle); + if (!gem_obj) { + DRM_DEBUG("Failed to look up GEM BO %d\n", args->handle); + return -ENOENT; + } + + ret = drm_gem_create_mmap_offset(gem_obj); + if (ret == 0) + args->offset = drm_vma_node_offset_addr(&gem_obj->vma_node); + drm_gem_object_put_unlocked(gem_obj); + + return ret; +} + +int v3d_get_bo_offset_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_v3d_get_bo_offset *args = data; + struct drm_gem_object *gem_obj; + struct v3d_bo *bo; + + gem_obj = drm_gem_object_lookup(file_priv, args->handle); + if (!gem_obj) { + DRM_DEBUG("Failed to look up GEM BO %d\n", args->handle); + return -ENOENT; + } + bo = to_v3d_bo(gem_obj); + + args->offset = bo->node.start << PAGE_SHIFT; + + drm_gem_object_put_unlocked(gem_obj); + return 0; +} diff --git a/drivers/gpu/drm/v3d/v3d_debugfs.c b/drivers/gpu/drm/v3d/v3d_debugfs.c new file mode 100644 index 000000000000..4db62c545748 --- /dev/null +++ b/drivers/gpu/drm/v3d/v3d_debugfs.c @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2014-2018 Broadcom */ + +#include <linux/circ_buf.h> +#include <linux/ctype.h> +#include <linux/debugfs.h> +#include <linux/pm_runtime.h> +#include <linux/seq_file.h> +#include <drm/drmP.h> + +#include "v3d_drv.h" +#include "v3d_regs.h" + +#define REGDEF(reg) { reg, #reg } +struct v3d_reg_def { + u32 reg; + const char *name; +}; + +static const struct v3d_reg_def v3d_hub_reg_defs[] = { + REGDEF(V3D_HUB_AXICFG), + REGDEF(V3D_HUB_UIFCFG), + REGDEF(V3D_HUB_IDENT0), + REGDEF(V3D_HUB_IDENT1), + REGDEF(V3D_HUB_IDENT2), + REGDEF(V3D_HUB_IDENT3), + REGDEF(V3D_HUB_INT_STS), + REGDEF(V3D_HUB_INT_MSK_STS), +}; + +static const struct v3d_reg_def v3d_gca_reg_defs[] = { + REGDEF(V3D_GCA_SAFE_SHUTDOWN), + REGDEF(V3D_GCA_SAFE_SHUTDOWN_ACK), +}; + +static const struct v3d_reg_def v3d_core_reg_defs[] = { + REGDEF(V3D_CTL_IDENT0), + REGDEF(V3D_CTL_IDENT1), + REGDEF(V3D_CTL_IDENT2), + REGDEF(V3D_CTL_MISCCFG), + REGDEF(V3D_CTL_INT_STS), + REGDEF(V3D_CTL_INT_MSK_STS), + REGDEF(V3D_CLE_CT0CS), + REGDEF(V3D_CLE_CT0CA), + REGDEF(V3D_CLE_CT0EA), + REGDEF(V3D_CLE_CT1CS), + REGDEF(V3D_CLE_CT1CA), + REGDEF(V3D_CLE_CT1EA), + + REGDEF(V3D_PTB_BPCA), + REGDEF(V3D_PTB_BPCS), + + REGDEF(V3D_MMU_CTL), + REGDEF(V3D_MMU_VIO_ADDR), + + REGDEF(V3D_GMP_STATUS), + REGDEF(V3D_GMP_CFG), + REGDEF(V3D_GMP_VIO_ADDR), +}; + +static int v3d_v3d_debugfs_regs(struct seq_file *m, void *unused) +{ + struct drm_info_node *node = (struct drm_info_node *)m->private; + struct drm_device *dev = node->minor->dev; + struct v3d_dev *v3d = to_v3d_dev(dev); + int i, core; + + for (i = 0; i < ARRAY_SIZE(v3d_hub_reg_defs); i++) { + seq_printf(m, "%s (0x%04x): 0x%08x\n", + v3d_hub_reg_defs[i].name, v3d_hub_reg_defs[i].reg, + V3D_READ(v3d_hub_reg_defs[i].reg)); + } + + for (i = 0; i < ARRAY_SIZE(v3d_gca_reg_defs); i++) { + seq_printf(m, "%s (0x%04x): 0x%08x\n", + v3d_gca_reg_defs[i].name, v3d_gca_reg_defs[i].reg, + V3D_GCA_READ(v3d_gca_reg_defs[i].reg)); + } + + for (core = 0; core < v3d->cores; core++) { + for (i = 0; i < ARRAY_SIZE(v3d_core_reg_defs); i++) { + seq_printf(m, "core %d %s (0x%04x): 0x%08x\n", + core, + v3d_core_reg_defs[i].name, + v3d_core_reg_defs[i].reg, + V3D_CORE_READ(core, + v3d_core_reg_defs[i].reg)); + } + } + + return 0; +} + +static int v3d_v3d_debugfs_ident(struct seq_file *m, void *unused) +{ + struct drm_info_node *node = (struct drm_info_node *)m->private; + struct drm_device *dev = node->minor->dev; + struct v3d_dev *v3d = to_v3d_dev(dev); + u32 ident0, ident1, ident2, ident3, cores; + int ret, core; + + ret = pm_runtime_get_sync(v3d->dev); + if (ret < 0) + return ret; + + ident0 = V3D_READ(V3D_HUB_IDENT0); + ident1 = V3D_READ(V3D_HUB_IDENT1); + ident2 = V3D_READ(V3D_HUB_IDENT2); + ident3 = V3D_READ(V3D_HUB_IDENT3); + cores = V3D_GET_FIELD(ident1, V3D_HUB_IDENT1_NCORES); + + seq_printf(m, "Revision: %d.%d.%d.%d\n", + V3D_GET_FIELD(ident1, V3D_HUB_IDENT1_TVER), + V3D_GET_FIELD(ident1, V3D_HUB_IDENT1_REV), + V3D_GET_FIELD(ident3, V3D_HUB_IDENT3_IPREV), + V3D_GET_FIELD(ident3, V3D_HUB_IDENT3_IPIDX)); + seq_printf(m, "MMU: %s\n", + (ident2 & V3D_HUB_IDENT2_WITH_MMU) ? "yes" : "no"); + seq_printf(m, "TFU: %s\n", + (ident1 & V3D_HUB_IDENT1_WITH_TFU) ? "yes" : "no"); + seq_printf(m, "TSY: %s\n", + (ident1 & V3D_HUB_IDENT1_WITH_TSY) ? "yes" : "no"); + seq_printf(m, "MSO: %s\n", + (ident1 & V3D_HUB_IDENT1_WITH_MSO) ? "yes" : "no"); + seq_printf(m, "L3C: %s (%dkb)\n", + (ident1 & V3D_HUB_IDENT1_WITH_L3C) ? "yes" : "no", + V3D_GET_FIELD(ident2, V3D_HUB_IDENT2_L3C_NKB)); + + for (core = 0; core < cores; core++) { + u32 misccfg; + u32 nslc, ntmu, qups; + + ident0 = V3D_CORE_READ(core, V3D_CTL_IDENT0); + ident1 = V3D_CORE_READ(core, V3D_CTL_IDENT1); + ident2 = V3D_CORE_READ(core, V3D_CTL_IDENT2); + misccfg = V3D_CORE_READ(core, V3D_CTL_MISCCFG); + + nslc = V3D_GET_FIELD(ident1, V3D_IDENT1_NSLC); + ntmu = V3D_GET_FIELD(ident1, V3D_IDENT1_NTMU); + qups = V3D_GET_FIELD(ident1, V3D_IDENT1_QUPS); + + seq_printf(m, "Core %d:\n", core); + seq_printf(m, " Revision: %d.%d\n", + V3D_GET_FIELD(ident0, V3D_IDENT0_VER), + V3D_GET_FIELD(ident1, V3D_IDENT1_REV)); + seq_printf(m, " Slices: %d\n", nslc); + seq_printf(m, " TMUs: %d\n", nslc * ntmu); + seq_printf(m, " QPUs: %d\n", nslc * qups); + seq_printf(m, " Semaphores: %d\n", + V3D_GET_FIELD(ident1, V3D_IDENT1_NSEM)); + seq_printf(m, " BCG int: %d\n", + (ident2 & V3D_IDENT2_BCG_INT) != 0); + seq_printf(m, " Override TMU: %d\n", + (misccfg & V3D_MISCCFG_OVRTMUOUT) != 0); + } + + pm_runtime_mark_last_busy(v3d->dev); + pm_runtime_put_autosuspend(v3d->dev); + + return 0; +} + +static int v3d_debugfs_bo_stats(struct seq_file *m, void *unused) +{ + struct drm_info_node *node = (struct drm_info_node *)m->private; + struct drm_device *dev = node->minor->dev; + struct v3d_dev *v3d = to_v3d_dev(dev); + + mutex_lock(&v3d->bo_lock); + seq_printf(m, "allocated bos: %d\n", + v3d->bo_stats.num_allocated); + seq_printf(m, "allocated bo size (kb): %ld\n", + (long)v3d->bo_stats.pages_allocated << (PAGE_SHIFT - 10)); + mutex_unlock(&v3d->bo_lock); + + return 0; +} + +static const struct drm_info_list v3d_debugfs_list[] = { + {"v3d_ident", v3d_v3d_debugfs_ident, 0}, + {"v3d_regs", v3d_v3d_debugfs_regs, 0}, + {"bo_stats", v3d_debugfs_bo_stats, 0}, +}; + +int +v3d_debugfs_init(struct drm_minor *minor) +{ + return drm_debugfs_create_files(v3d_debugfs_list, + ARRAY_SIZE(v3d_debugfs_list), + minor->debugfs_root, minor); +} diff --git a/drivers/gpu/drm/v3d/v3d_drv.c b/drivers/gpu/drm/v3d/v3d_drv.c new file mode 100644 index 000000000000..38e8041b5f0c --- /dev/null +++ b/drivers/gpu/drm/v3d/v3d_drv.c @@ -0,0 +1,371 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2014-2018 Broadcom */ + +/** + * DOC: Broadcom V3D Graphics Driver + * + * This driver supports the Broadcom V3D 3.3 and 4.1 OpenGL ES GPUs. + * For V3D 2.x support, see the VC4 driver. + * + * Currently only single-core rendering using the binner and renderer + * is supported. The TFU (texture formatting unit) and V3D 4.x's CSD + * (compute shader dispatch) are not yet supported. + */ + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <drm/drm_fb_cma_helper.h> +#include <drm/drm_fb_helper.h> + +#include "uapi/drm/v3d_drm.h" +#include "v3d_drv.h" +#include "v3d_regs.h" + +#define DRIVER_NAME "v3d" +#define DRIVER_DESC "Broadcom V3D graphics" +#define DRIVER_DATE "20180419" +#define DRIVER_MAJOR 1 +#define DRIVER_MINOR 0 +#define DRIVER_PATCHLEVEL 0 + +#ifdef CONFIG_PM +static int v3d_runtime_suspend(struct device *dev) +{ + struct drm_device *drm = dev_get_drvdata(dev); + struct v3d_dev *v3d = to_v3d_dev(drm); + + v3d_irq_disable(v3d); + + clk_disable_unprepare(v3d->clk); + + return 0; +} + +static int v3d_runtime_resume(struct device *dev) +{ + struct drm_device *drm = dev_get_drvdata(dev); + struct v3d_dev *v3d = to_v3d_dev(drm); + int ret; + + ret = clk_prepare_enable(v3d->clk); + if (ret != 0) + return ret; + + /* XXX: VPM base */ + + v3d_mmu_set_page_table(v3d); + v3d_irq_enable(v3d); + + return 0; +} +#endif + +static const struct dev_pm_ops v3d_v3d_pm_ops = { + SET_RUNTIME_PM_OPS(v3d_runtime_suspend, v3d_runtime_resume, NULL) +}; + +static int v3d_get_param_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct v3d_dev *v3d = to_v3d_dev(dev); + struct drm_v3d_get_param *args = data; + int ret; + static const u32 reg_map[] = { + [DRM_V3D_PARAM_V3D_UIFCFG] = V3D_HUB_UIFCFG, + [DRM_V3D_PARAM_V3D_HUB_IDENT1] = V3D_HUB_IDENT1, + [DRM_V3D_PARAM_V3D_HUB_IDENT2] = V3D_HUB_IDENT2, + [DRM_V3D_PARAM_V3D_HUB_IDENT3] = V3D_HUB_IDENT3, + [DRM_V3D_PARAM_V3D_CORE0_IDENT0] = V3D_CTL_IDENT0, + [DRM_V3D_PARAM_V3D_CORE0_IDENT1] = V3D_CTL_IDENT1, + [DRM_V3D_PARAM_V3D_CORE0_IDENT2] = V3D_CTL_IDENT2, + }; + + if (args->pad != 0) + return -EINVAL; + + /* Note that DRM_V3D_PARAM_V3D_CORE0_IDENT0 is 0, so we need + * to explicitly allow it in the "the register in our + * parameter map" check. + */ + if (args->param < ARRAY_SIZE(reg_map) && + (reg_map[args->param] || + args->param == DRM_V3D_PARAM_V3D_CORE0_IDENT0)) { + u32 offset = reg_map[args->param]; + + if (args->value != 0) + return -EINVAL; + + ret = pm_runtime_get_sync(v3d->dev); + if (args->param >= DRM_V3D_PARAM_V3D_CORE0_IDENT0 && + args->param <= DRM_V3D_PARAM_V3D_CORE0_IDENT2) { + args->value = V3D_CORE_READ(0, offset); + } else { + args->value = V3D_READ(offset); + } + pm_runtime_mark_last_busy(v3d->dev); + pm_runtime_put_autosuspend(v3d->dev); + return 0; + } + + /* Any params that aren't just register reads would go here. */ + + DRM_DEBUG("Unknown parameter %d\n", args->param); + return -EINVAL; +} + +static int +v3d_open(struct drm_device *dev, struct drm_file *file) +{ + struct v3d_dev *v3d = to_v3d_dev(dev); + struct v3d_file_priv *v3d_priv; + int i; + + v3d_priv = kzalloc(sizeof(*v3d_priv), GFP_KERNEL); + if (!v3d_priv) + return -ENOMEM; + + v3d_priv->v3d = v3d; + + for (i = 0; i < V3D_MAX_QUEUES; i++) { + drm_sched_entity_init(&v3d->queue[i].sched, + &v3d_priv->sched_entity[i], + &v3d->queue[i].sched.sched_rq[DRM_SCHED_PRIORITY_NORMAL], + 32, NULL); + } + + file->driver_priv = v3d_priv; + + return 0; +} + +static void +v3d_postclose(struct drm_device *dev, struct drm_file *file) +{ + struct v3d_dev *v3d = to_v3d_dev(dev); + struct v3d_file_priv *v3d_priv = file->driver_priv; + enum v3d_queue q; + + for (q = 0; q < V3D_MAX_QUEUES; q++) { + drm_sched_entity_fini(&v3d->queue[q].sched, + &v3d_priv->sched_entity[q]); + } + + kfree(v3d_priv); +} + +static const struct file_operations v3d_drm_fops = { + .owner = THIS_MODULE, + .open = drm_open, + .release = drm_release, + .unlocked_ioctl = drm_ioctl, + .mmap = v3d_mmap, + .poll = drm_poll, + .read = drm_read, + .compat_ioctl = drm_compat_ioctl, + .llseek = noop_llseek, +}; + +/* DRM_AUTH is required on SUBMIT_CL for now, while we don't have GMP + * protection between clients. Note that render nodes would be be + * able to submit CLs that could access BOs from clients authenticated + * with the master node. + */ +static const struct drm_ioctl_desc v3d_drm_ioctls[] = { + DRM_IOCTL_DEF_DRV(V3D_SUBMIT_CL, v3d_submit_cl_ioctl, DRM_RENDER_ALLOW | DRM_AUTH), + DRM_IOCTL_DEF_DRV(V3D_WAIT_BO, v3d_wait_bo_ioctl, DRM_RENDER_ALLOW), + DRM_IOCTL_DEF_DRV(V3D_CREATE_BO, v3d_create_bo_ioctl, DRM_RENDER_ALLOW), + DRM_IOCTL_DEF_DRV(V3D_MMAP_BO, v3d_mmap_bo_ioctl, DRM_RENDER_ALLOW), + DRM_IOCTL_DEF_DRV(V3D_GET_PARAM, v3d_get_param_ioctl, DRM_RENDER_ALLOW), + DRM_IOCTL_DEF_DRV(V3D_GET_BO_OFFSET, v3d_get_bo_offset_ioctl, DRM_RENDER_ALLOW), +}; + +static const struct vm_operations_struct v3d_vm_ops = { + .fault = v3d_gem_fault, + .open = drm_gem_vm_open, + .close = drm_gem_vm_close, +}; + +static struct drm_driver v3d_drm_driver = { + .driver_features = (DRIVER_GEM | + DRIVER_RENDER | + DRIVER_PRIME | + DRIVER_SYNCOBJ), + + .open = v3d_open, + .postclose = v3d_postclose, + +#if defined(CONFIG_DEBUG_FS) + .debugfs_init = v3d_debugfs_init, +#endif + + .gem_free_object_unlocked = v3d_free_object, + .gem_vm_ops = &v3d_vm_ops, + + .prime_handle_to_fd = drm_gem_prime_handle_to_fd, + .prime_fd_to_handle = drm_gem_prime_fd_to_handle, + .gem_prime_import = drm_gem_prime_import, + .gem_prime_export = drm_gem_prime_export, + .gem_prime_res_obj = v3d_prime_res_obj, + .gem_prime_get_sg_table = v3d_prime_get_sg_table, + .gem_prime_import_sg_table = v3d_prime_import_sg_table, + .gem_prime_mmap = v3d_prime_mmap, + + .ioctls = v3d_drm_ioctls, + .num_ioctls = ARRAY_SIZE(v3d_drm_ioctls), + .fops = &v3d_drm_fops, + + .name = DRIVER_NAME, + .desc = DRIVER_DESC, + .date = DRIVER_DATE, + .major = DRIVER_MAJOR, + .minor = DRIVER_MINOR, + .patchlevel = DRIVER_PATCHLEVEL, +}; + +static const struct of_device_id v3d_of_match[] = { + { .compatible = "brcm,7268-v3d" }, + { .compatible = "brcm,7278-v3d" }, + {}, +}; +MODULE_DEVICE_TABLE(of, v3d_of_match); + +static int +map_regs(struct v3d_dev *v3d, void __iomem **regs, const char *name) +{ + struct resource *res = + platform_get_resource_byname(v3d->pdev, IORESOURCE_MEM, name); + + *regs = devm_ioremap_resource(v3d->dev, res); + return PTR_ERR_OR_ZERO(*regs); +} + +static int v3d_platform_drm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct drm_device *drm; + struct v3d_dev *v3d; + int ret; + u32 ident1; + + dev->coherent_dma_mask = DMA_BIT_MASK(36); + + v3d = kzalloc(sizeof(*v3d), GFP_KERNEL); + if (!v3d) + return -ENOMEM; + v3d->dev = dev; + v3d->pdev = pdev; + drm = &v3d->drm; + + ret = map_regs(v3d, &v3d->bridge_regs, "bridge"); + if (ret) + goto dev_free; + + ret = map_regs(v3d, &v3d->hub_regs, "hub"); + if (ret) + goto dev_free; + + ret = map_regs(v3d, &v3d->core_regs[0], "core0"); + if (ret) + goto dev_free; + + ident1 = V3D_READ(V3D_HUB_IDENT1); + v3d->ver = (V3D_GET_FIELD(ident1, V3D_HUB_IDENT1_TVER) * 10 + + V3D_GET_FIELD(ident1, V3D_HUB_IDENT1_REV)); + v3d->cores = V3D_GET_FIELD(ident1, V3D_HUB_IDENT1_NCORES); + WARN_ON(v3d->cores > 1); /* multicore not yet implemented */ + + if (v3d->ver < 41) { + ret = map_regs(v3d, &v3d->gca_regs, "gca"); + if (ret) + goto dev_free; + } + + v3d->mmu_scratch = dma_alloc_wc(dev, 4096, &v3d->mmu_scratch_paddr, + GFP_KERNEL | __GFP_NOWARN | __GFP_ZERO); + if (!v3d->mmu_scratch) { + dev_err(dev, "Failed to allocate MMU scratch page\n"); + ret = -ENOMEM; + goto dev_free; + } + + pm_runtime_use_autosuspend(dev); + pm_runtime_set_autosuspend_delay(dev, 50); + pm_runtime_enable(dev); + + ret = drm_dev_init(&v3d->drm, &v3d_drm_driver, dev); + if (ret) + goto dma_free; + + platform_set_drvdata(pdev, drm); + drm->dev_private = v3d; + + ret = v3d_gem_init(drm); + if (ret) + goto dev_destroy; + + v3d_irq_init(v3d); + + ret = drm_dev_register(drm, 0); + if (ret) + goto gem_destroy; + + return 0; + +gem_destroy: + v3d_gem_destroy(drm); +dev_destroy: + drm_dev_put(drm); +dma_free: + dma_free_wc(dev, 4096, v3d->mmu_scratch, v3d->mmu_scratch_paddr); +dev_free: + kfree(v3d); + return ret; +} + +static int v3d_platform_drm_remove(struct platform_device *pdev) +{ + struct drm_device *drm = platform_get_drvdata(pdev); + struct v3d_dev *v3d = to_v3d_dev(drm); + + drm_dev_unregister(drm); + + v3d_gem_destroy(drm); + + drm_dev_put(drm); + + dma_free_wc(v3d->dev, 4096, v3d->mmu_scratch, v3d->mmu_scratch_paddr); + + return 0; +} + +static struct platform_driver v3d_platform_driver = { + .probe = v3d_platform_drm_probe, + .remove = v3d_platform_drm_remove, + .driver = { + .name = "v3d", + .of_match_table = v3d_of_match, + }, +}; + +static int __init v3d_drm_register(void) +{ + return platform_driver_register(&v3d_platform_driver); +} + +static void __exit v3d_drm_unregister(void) +{ + platform_driver_unregister(&v3d_platform_driver); +} + +module_init(v3d_drm_register); +module_exit(v3d_drm_unregister); + +MODULE_ALIAS("platform:v3d-drm"); +MODULE_DESCRIPTION("Broadcom V3D DRM Driver"); +MODULE_AUTHOR("Eric Anholt <eric@anholt.net>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/v3d/v3d_drv.h b/drivers/gpu/drm/v3d/v3d_drv.h new file mode 100644 index 000000000000..a043ac3aae98 --- /dev/null +++ b/drivers/gpu/drm/v3d/v3d_drv.h @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2015-2018 Broadcom */ + +#include <linux/reservation.h> +#include <drm/drmP.h> +#include <drm/drm_encoder.h> +#include <drm/drm_gem.h> +#include <drm/gpu_scheduler.h> + +#define GMP_GRANULARITY (128 * 1024) + +/* Enum for each of the V3D queues. We maintain various queue + * tracking as an array because at some point we'll want to support + * the TFU (texture formatting unit) as another queue. + */ +enum v3d_queue { + V3D_BIN, + V3D_RENDER, +}; + +#define V3D_MAX_QUEUES (V3D_RENDER + 1) + +struct v3d_queue_state { + struct drm_gpu_scheduler sched; + + u64 fence_context; + u64 emit_seqno; + u64 finished_seqno; +}; + +struct v3d_dev { + struct drm_device drm; + + /* Short representation (e.g. 33, 41) of the V3D tech version + * and revision. + */ + int ver; + + struct device *dev; + struct platform_device *pdev; + void __iomem *hub_regs; + void __iomem *core_regs[3]; + void __iomem *bridge_regs; + void __iomem *gca_regs; + struct clk *clk; + + /* Virtual and DMA addresses of the single shared page table. */ + volatile u32 *pt; + dma_addr_t pt_paddr; + + /* Virtual and DMA addresses of the MMU's scratch page. When + * a read or write is invalid in the MMU, it will be + * redirected here. + */ + void *mmu_scratch; + dma_addr_t mmu_scratch_paddr; + + /* Number of V3D cores. */ + u32 cores; + + /* Allocator managing the address space. All units are in + * number of pages. + */ + struct drm_mm mm; + spinlock_t mm_lock; + + struct work_struct overflow_mem_work; + + struct v3d_exec_info *bin_job; + struct v3d_exec_info *render_job; + + struct v3d_queue_state queue[V3D_MAX_QUEUES]; + + /* Spinlock used to synchronize the overflow memory + * management against bin job submission. + */ + spinlock_t job_lock; + + /* Protects bo_stats */ + struct mutex bo_lock; + + /* Lock taken when resetting the GPU, to keep multiple + * processes from trying to park the scheduler threads and + * reset at once. + */ + struct mutex reset_lock; + + struct { + u32 num_allocated; + u32 pages_allocated; + } bo_stats; +}; + +static inline struct v3d_dev * +to_v3d_dev(struct drm_device *dev) +{ + return (struct v3d_dev *)dev->dev_private; +} + +/* The per-fd struct, which tracks the MMU mappings. */ +struct v3d_file_priv { + struct v3d_dev *v3d; + + struct drm_sched_entity sched_entity[V3D_MAX_QUEUES]; +}; + +/* Tracks a mapping of a BO into a per-fd address space */ +struct v3d_vma { + struct v3d_page_table *pt; + struct list_head list; /* entry in v3d_bo.vmas */ +}; + +struct v3d_bo { + struct drm_gem_object base; + + struct mutex lock; + + struct drm_mm_node node; + + u32 pages_refcount; + struct page **pages; + struct sg_table *sgt; + void *vaddr; + + struct list_head vmas; /* list of v3d_vma */ + + /* List entry for the BO's position in + * v3d_exec_info->unref_list + */ + struct list_head unref_head; + + /* normally (resv == &_resv) except for imported bo's */ + struct reservation_object *resv; + struct reservation_object _resv; +}; + +static inline struct v3d_bo * +to_v3d_bo(struct drm_gem_object *bo) +{ + return (struct v3d_bo *)bo; +} + +struct v3d_fence { + struct dma_fence base; + struct drm_device *dev; + /* v3d seqno for signaled() test */ + u64 seqno; + enum v3d_queue queue; +}; + +static inline struct v3d_fence * +to_v3d_fence(struct dma_fence *fence) +{ + return (struct v3d_fence *)fence; +} + +#define V3D_READ(offset) readl(v3d->hub_regs + offset) +#define V3D_WRITE(offset, val) writel(val, v3d->hub_regs + offset) + +#define V3D_BRIDGE_READ(offset) readl(v3d->bridge_regs + offset) +#define V3D_BRIDGE_WRITE(offset, val) writel(val, v3d->bridge_regs + offset) + +#define V3D_GCA_READ(offset) readl(v3d->gca_regs + offset) +#define V3D_GCA_WRITE(offset, val) writel(val, v3d->gca_regs + offset) + +#define V3D_CORE_READ(core, offset) readl(v3d->core_regs[core] + offset) +#define V3D_CORE_WRITE(core, offset, val) writel(val, v3d->core_regs[core] + offset) + +struct v3d_job { + struct drm_sched_job base; + + struct v3d_exec_info *exec; + + /* An optional fence userspace can pass in for the job to depend on. */ + struct dma_fence *in_fence; + + /* v3d fence to be signaled by IRQ handler when the job is complete. */ + struct dma_fence *done_fence; + + /* GPU virtual addresses of the start/end of the CL job. */ + u32 start, end; +}; + +struct v3d_exec_info { + struct v3d_dev *v3d; + + struct v3d_job bin, render; + + /* Fence for when the scheduler considers the binner to be + * done, for render to depend on. + */ + struct dma_fence *bin_done_fence; + + struct kref refcount; + + /* This is the array of BOs that were looked up at the start of exec. */ + struct v3d_bo **bo; + u32 bo_count; + + /* List of overflow BOs used in the job that need to be + * released once the job is complete. + */ + struct list_head unref_list; + + /* Submitted tile memory allocation start/size, tile state. */ + u32 qma, qms, qts; +}; + +/** + * _wait_for - magic (register) wait macro + * + * Does the right thing for modeset paths when run under kdgb or similar atomic + * contexts. Note that it's important that we check the condition again after + * having timed out, since the timeout could be due to preemption or similar and + * we've never had a chance to check the condition before the timeout. + */ +#define wait_for(COND, MS) ({ \ + unsigned long timeout__ = jiffies + msecs_to_jiffies(MS) + 1; \ + int ret__ = 0; \ + while (!(COND)) { \ + if (time_after(jiffies, timeout__)) { \ + if (!(COND)) \ + ret__ = -ETIMEDOUT; \ + break; \ + } \ + msleep(1); \ + } \ + ret__; \ +}) + +static inline unsigned long nsecs_to_jiffies_timeout(const u64 n) +{ + /* nsecs_to_jiffies64() does not guard against overflow */ + if (NSEC_PER_SEC % HZ && + div_u64(n, NSEC_PER_SEC) >= MAX_JIFFY_OFFSET / HZ) + return MAX_JIFFY_OFFSET; + + return min_t(u64, MAX_JIFFY_OFFSET, nsecs_to_jiffies64(n) + 1); +} + +/* v3d_bo.c */ +void v3d_free_object(struct drm_gem_object *gem_obj); +struct v3d_bo *v3d_bo_create(struct drm_device *dev, struct drm_file *file_priv, + size_t size); +int v3d_create_bo_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int v3d_mmap_bo_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int v3d_get_bo_offset_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int v3d_gem_fault(struct vm_fault *vmf); +int v3d_mmap(struct file *filp, struct vm_area_struct *vma); +struct reservation_object *v3d_prime_res_obj(struct drm_gem_object *obj); +int v3d_prime_mmap(struct drm_gem_object *obj, struct vm_area_struct *vma); +struct sg_table *v3d_prime_get_sg_table(struct drm_gem_object *obj); +struct drm_gem_object *v3d_prime_import_sg_table(struct drm_device *dev, + struct dma_buf_attachment *attach, + struct sg_table *sgt); + +/* v3d_debugfs.c */ +int v3d_debugfs_init(struct drm_minor *minor); + +/* v3d_fence.c */ +extern const struct dma_fence_ops v3d_fence_ops; +struct dma_fence *v3d_fence_create(struct v3d_dev *v3d, enum v3d_queue queue); + +/* v3d_gem.c */ +int v3d_gem_init(struct drm_device *dev); +void v3d_gem_destroy(struct drm_device *dev); +int v3d_submit_cl_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int v3d_wait_bo_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +void v3d_exec_put(struct v3d_exec_info *exec); +void v3d_reset(struct v3d_dev *v3d); +void v3d_invalidate_caches(struct v3d_dev *v3d); +void v3d_flush_caches(struct v3d_dev *v3d); + +/* v3d_irq.c */ +void v3d_irq_init(struct v3d_dev *v3d); +void v3d_irq_enable(struct v3d_dev *v3d); +void v3d_irq_disable(struct v3d_dev *v3d); +void v3d_irq_reset(struct v3d_dev *v3d); + +/* v3d_mmu.c */ +int v3d_mmu_get_offset(struct drm_file *file_priv, struct v3d_bo *bo, + u32 *offset); +int v3d_mmu_set_page_table(struct v3d_dev *v3d); +void v3d_mmu_insert_ptes(struct v3d_bo *bo); +void v3d_mmu_remove_ptes(struct v3d_bo *bo); + +/* v3d_sched.c */ +int v3d_sched_init(struct v3d_dev *v3d); +void v3d_sched_fini(struct v3d_dev *v3d); diff --git a/drivers/gpu/drm/v3d/v3d_fence.c b/drivers/gpu/drm/v3d/v3d_fence.c new file mode 100644 index 000000000000..087d49c8cb12 --- /dev/null +++ b/drivers/gpu/drm/v3d/v3d_fence.c @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2017-2018 Broadcom */ + +#include "v3d_drv.h" + +struct dma_fence *v3d_fence_create(struct v3d_dev *v3d, enum v3d_queue queue) +{ + struct v3d_fence *fence; + + fence = kzalloc(sizeof(*fence), GFP_KERNEL); + if (!fence) + return ERR_PTR(-ENOMEM); + + fence->dev = &v3d->drm; + fence->queue = queue; + fence->seqno = ++v3d->queue[queue].emit_seqno; + dma_fence_init(&fence->base, &v3d_fence_ops, &v3d->job_lock, + v3d->queue[queue].fence_context, fence->seqno); + + return &fence->base; +} + +static const char *v3d_fence_get_driver_name(struct dma_fence *fence) +{ + return "v3d"; +} + +static const char *v3d_fence_get_timeline_name(struct dma_fence *fence) +{ + struct v3d_fence *f = to_v3d_fence(fence); + + if (f->queue == V3D_BIN) + return "v3d-bin"; + else + return "v3d-render"; +} + +static bool v3d_fence_enable_signaling(struct dma_fence *fence) +{ + return true; +} + +static bool v3d_fence_signaled(struct dma_fence *fence) +{ + struct v3d_fence *f = to_v3d_fence(fence); + struct v3d_dev *v3d = to_v3d_dev(f->dev); + + return v3d->queue[f->queue].finished_seqno >= f->seqno; +} + +const struct dma_fence_ops v3d_fence_ops = { + .get_driver_name = v3d_fence_get_driver_name, + .get_timeline_name = v3d_fence_get_timeline_name, + .enable_signaling = v3d_fence_enable_signaling, + .signaled = v3d_fence_signaled, + .wait = dma_fence_default_wait, + .release = dma_fence_free, +}; diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c new file mode 100644 index 000000000000..b513f9189caf --- /dev/null +++ b/drivers/gpu/drm/v3d/v3d_gem.c @@ -0,0 +1,668 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2014-2018 Broadcom */ + +#include <drm/drmP.h> +#include <drm/drm_syncobj.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/sched/signal.h> + +#include "uapi/drm/v3d_drm.h" +#include "v3d_drv.h" +#include "v3d_regs.h" +#include "v3d_trace.h" + +static void +v3d_init_core(struct v3d_dev *v3d, int core) +{ + /* Set OVRTMUOUT, which means that the texture sampler uniform + * configuration's tmu output type field is used, instead of + * using the hardware default behavior based on the texture + * type. If you want the default behavior, you can still put + * "2" in the indirect texture state's output_type field. + */ + V3D_CORE_WRITE(core, V3D_CTL_MISCCFG, V3D_MISCCFG_OVRTMUOUT); + + /* Whenever we flush the L2T cache, we always want to flush + * the whole thing. + */ + V3D_CORE_WRITE(core, V3D_CTL_L2TFLSTA, 0); + V3D_CORE_WRITE(core, V3D_CTL_L2TFLEND, ~0); +} + +/* Sets invariant state for the HW. */ +static void +v3d_init_hw_state(struct v3d_dev *v3d) +{ + v3d_init_core(v3d, 0); +} + +static void +v3d_idle_axi(struct v3d_dev *v3d, int core) +{ + V3D_CORE_WRITE(core, V3D_GMP_CFG, V3D_GMP_CFG_STOP_REQ); + + if (wait_for((V3D_CORE_READ(core, V3D_GMP_STATUS) & + (V3D_GMP_STATUS_RD_COUNT_MASK | + V3D_GMP_STATUS_WR_COUNT_MASK | + V3D_GMP_STATUS_CFG_BUSY)) == 0, 100)) { + DRM_ERROR("Failed to wait for safe GMP shutdown\n"); + } +} + +static void +v3d_idle_gca(struct v3d_dev *v3d) +{ + if (v3d->ver >= 41) + return; + + V3D_GCA_WRITE(V3D_GCA_SAFE_SHUTDOWN, V3D_GCA_SAFE_SHUTDOWN_EN); + + if (wait_for((V3D_GCA_READ(V3D_GCA_SAFE_SHUTDOWN_ACK) & + V3D_GCA_SAFE_SHUTDOWN_ACK_ACKED) == + V3D_GCA_SAFE_SHUTDOWN_ACK_ACKED, 100)) { + DRM_ERROR("Failed to wait for safe GCA shutdown\n"); + } +} + +static void +v3d_reset_v3d(struct v3d_dev *v3d) +{ + int version = V3D_BRIDGE_READ(V3D_TOP_GR_BRIDGE_REVISION); + + if (V3D_GET_FIELD(version, V3D_TOP_GR_BRIDGE_MAJOR) == 2) { + V3D_BRIDGE_WRITE(V3D_TOP_GR_BRIDGE_SW_INIT_0, + V3D_TOP_GR_BRIDGE_SW_INIT_0_V3D_CLK_108_SW_INIT); + V3D_BRIDGE_WRITE(V3D_TOP_GR_BRIDGE_SW_INIT_0, 0); + + /* GFXH-1383: The SW_INIT may cause a stray write to address 0 + * of the unit, so reset it to its power-on value here. + */ + V3D_WRITE(V3D_HUB_AXICFG, V3D_HUB_AXICFG_MAX_LEN_MASK); + } else { + WARN_ON_ONCE(V3D_GET_FIELD(version, + V3D_TOP_GR_BRIDGE_MAJOR) != 7); + V3D_BRIDGE_WRITE(V3D_TOP_GR_BRIDGE_SW_INIT_1, + V3D_TOP_GR_BRIDGE_SW_INIT_1_V3D_CLK_108_SW_INIT); + V3D_BRIDGE_WRITE(V3D_TOP_GR_BRIDGE_SW_INIT_1, 0); + } + + v3d_init_hw_state(v3d); +} + +void +v3d_reset(struct v3d_dev *v3d) +{ + struct drm_device *dev = &v3d->drm; + + DRM_ERROR("Resetting GPU.\n"); + trace_v3d_reset_begin(dev); + + /* XXX: only needed for safe powerdown, not reset. */ + if (false) + v3d_idle_axi(v3d, 0); + + v3d_idle_gca(v3d); + v3d_reset_v3d(v3d); + + v3d_mmu_set_page_table(v3d); + v3d_irq_reset(v3d); + + trace_v3d_reset_end(dev); +} + +static void +v3d_flush_l3(struct v3d_dev *v3d) +{ + if (v3d->ver < 41) { + u32 gca_ctrl = V3D_GCA_READ(V3D_GCA_CACHE_CTRL); + + V3D_GCA_WRITE(V3D_GCA_CACHE_CTRL, + gca_ctrl | V3D_GCA_CACHE_CTRL_FLUSH); + + if (v3d->ver < 33) { + V3D_GCA_WRITE(V3D_GCA_CACHE_CTRL, + gca_ctrl & ~V3D_GCA_CACHE_CTRL_FLUSH); + } + } +} + +/* Invalidates the (read-only) L2 cache. */ +static void +v3d_invalidate_l2(struct v3d_dev *v3d, int core) +{ + V3D_CORE_WRITE(core, V3D_CTL_L2CACTL, + V3D_L2CACTL_L2CCLR | + V3D_L2CACTL_L2CENA); +} + +static void +v3d_invalidate_l1td(struct v3d_dev *v3d, int core) +{ + V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL, V3D_L2TCACTL_TMUWCF); + if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) & + V3D_L2TCACTL_L2TFLS), 100)) { + DRM_ERROR("Timeout waiting for L1T write combiner flush\n"); + } +} + +/* Invalidates texture L2 cachelines */ +static void +v3d_flush_l2t(struct v3d_dev *v3d, int core) +{ + v3d_invalidate_l1td(v3d, core); + + V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL, + V3D_L2TCACTL_L2TFLS | + V3D_SET_FIELD(V3D_L2TCACTL_FLM_FLUSH, V3D_L2TCACTL_FLM)); + if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) & + V3D_L2TCACTL_L2TFLS), 100)) { + DRM_ERROR("Timeout waiting for L2T flush\n"); + } +} + +/* Invalidates the slice caches. These are read-only caches. */ +static void +v3d_invalidate_slices(struct v3d_dev *v3d, int core) +{ + V3D_CORE_WRITE(core, V3D_CTL_SLCACTL, + V3D_SET_FIELD(0xf, V3D_SLCACTL_TVCCS) | + V3D_SET_FIELD(0xf, V3D_SLCACTL_TDCCS) | + V3D_SET_FIELD(0xf, V3D_SLCACTL_UCC) | + V3D_SET_FIELD(0xf, V3D_SLCACTL_ICC)); +} + +/* Invalidates texture L2 cachelines */ +static void +v3d_invalidate_l2t(struct v3d_dev *v3d, int core) +{ + V3D_CORE_WRITE(core, + V3D_CTL_L2TCACTL, + V3D_L2TCACTL_L2TFLS | + V3D_SET_FIELD(V3D_L2TCACTL_FLM_CLEAR, V3D_L2TCACTL_FLM)); + if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) & + V3D_L2TCACTL_L2TFLS), 100)) { + DRM_ERROR("Timeout waiting for L2T invalidate\n"); + } +} + +void +v3d_invalidate_caches(struct v3d_dev *v3d) +{ + v3d_flush_l3(v3d); + + v3d_invalidate_l2(v3d, 0); + v3d_invalidate_slices(v3d, 0); + v3d_flush_l2t(v3d, 0); +} + +void +v3d_flush_caches(struct v3d_dev *v3d) +{ + v3d_invalidate_l1td(v3d, 0); + v3d_invalidate_l2t(v3d, 0); +} + +static void +v3d_attach_object_fences(struct v3d_exec_info *exec) +{ + struct dma_fence *out_fence = &exec->render.base.s_fence->finished; + struct v3d_bo *bo; + int i; + + for (i = 0; i < exec->bo_count; i++) { + bo = to_v3d_bo(&exec->bo[i]->base); + + /* XXX: Use shared fences for read-only objects. */ + reservation_object_add_excl_fence(bo->resv, out_fence); + } +} + +static void +v3d_unlock_bo_reservations(struct drm_device *dev, + struct v3d_exec_info *exec, + struct ww_acquire_ctx *acquire_ctx) +{ + int i; + + for (i = 0; i < exec->bo_count; i++) { + struct v3d_bo *bo = to_v3d_bo(&exec->bo[i]->base); + + ww_mutex_unlock(&bo->resv->lock); + } + + ww_acquire_fini(acquire_ctx); +} + +/* Takes the reservation lock on all the BOs being referenced, so that + * at queue submit time we can update the reservations. + * + * We don't lock the RCL the tile alloc/state BOs, or overflow memory + * (all of which are on exec->unref_list). They're entirely private + * to v3d, so we don't attach dma-buf fences to them. + */ +static int +v3d_lock_bo_reservations(struct drm_device *dev, + struct v3d_exec_info *exec, + struct ww_acquire_ctx *acquire_ctx) +{ + int contended_lock = -1; + int i, ret; + struct v3d_bo *bo; + + ww_acquire_init(acquire_ctx, &reservation_ww_class); + +retry: + if (contended_lock != -1) { + bo = to_v3d_bo(&exec->bo[contended_lock]->base); + ret = ww_mutex_lock_slow_interruptible(&bo->resv->lock, + acquire_ctx); + if (ret) { + ww_acquire_done(acquire_ctx); + return ret; + } + } + + for (i = 0; i < exec->bo_count; i++) { + if (i == contended_lock) + continue; + + bo = to_v3d_bo(&exec->bo[i]->base); + + ret = ww_mutex_lock_interruptible(&bo->resv->lock, acquire_ctx); + if (ret) { + int j; + + for (j = 0; j < i; j++) { + bo = to_v3d_bo(&exec->bo[j]->base); + ww_mutex_unlock(&bo->resv->lock); + } + + if (contended_lock != -1 && contended_lock >= i) { + bo = to_v3d_bo(&exec->bo[contended_lock]->base); + + ww_mutex_unlock(&bo->resv->lock); + } + + if (ret == -EDEADLK) { + contended_lock = i; + goto retry; + } + + ww_acquire_done(acquire_ctx); + return ret; + } + } + + ww_acquire_done(acquire_ctx); + + /* Reserve space for our shared (read-only) fence references, + * before we commit the CL to the hardware. + */ + for (i = 0; i < exec->bo_count; i++) { + bo = to_v3d_bo(&exec->bo[i]->base); + + ret = reservation_object_reserve_shared(bo->resv); + if (ret) { + v3d_unlock_bo_reservations(dev, exec, acquire_ctx); + return ret; + } + } + + return 0; +} + +/** + * v3d_cl_lookup_bos() - Sets up exec->bo[] with the GEM objects + * referenced by the job. + * @dev: DRM device + * @file_priv: DRM file for this fd + * @exec: V3D job being set up + * + * The command validator needs to reference BOs by their index within + * the submitted job's BO list. This does the validation of the job's + * BO list and reference counting for the lifetime of the job. + * + * Note that this function doesn't need to unreference the BOs on + * failure, because that will happen at v3d_exec_cleanup() time. + */ +static int +v3d_cl_lookup_bos(struct drm_device *dev, + struct drm_file *file_priv, + struct drm_v3d_submit_cl *args, + struct v3d_exec_info *exec) +{ + u32 *handles; + int ret = 0; + int i; + + exec->bo_count = args->bo_handle_count; + + if (!exec->bo_count) { + /* See comment on bo_index for why we have to check + * this. + */ + DRM_DEBUG("Rendering requires BOs\n"); + return -EINVAL; + } + + exec->bo = kvmalloc_array(exec->bo_count, + sizeof(struct drm_gem_cma_object *), + GFP_KERNEL | __GFP_ZERO); + if (!exec->bo) { + DRM_DEBUG("Failed to allocate validated BO pointers\n"); + return -ENOMEM; + } + + handles = kvmalloc_array(exec->bo_count, sizeof(u32), GFP_KERNEL); + if (!handles) { + ret = -ENOMEM; + DRM_DEBUG("Failed to allocate incoming GEM handles\n"); + goto fail; + } + + if (copy_from_user(handles, + (void __user *)(uintptr_t)args->bo_handles, + exec->bo_count * sizeof(u32))) { + ret = -EFAULT; + DRM_DEBUG("Failed to copy in GEM handles\n"); + goto fail; + } + + spin_lock(&file_priv->table_lock); + for (i = 0; i < exec->bo_count; i++) { + struct drm_gem_object *bo = idr_find(&file_priv->object_idr, + handles[i]); + if (!bo) { + DRM_DEBUG("Failed to look up GEM BO %d: %d\n", + i, handles[i]); + ret = -ENOENT; + spin_unlock(&file_priv->table_lock); + goto fail; + } + drm_gem_object_get(bo); + exec->bo[i] = to_v3d_bo(bo); + } + spin_unlock(&file_priv->table_lock); + +fail: + kvfree(handles); + return ret; +} + +static void +v3d_exec_cleanup(struct kref *ref) +{ + struct v3d_exec_info *exec = container_of(ref, struct v3d_exec_info, + refcount); + struct v3d_dev *v3d = exec->v3d; + unsigned int i; + struct v3d_bo *bo, *save; + + dma_fence_put(exec->bin.in_fence); + dma_fence_put(exec->render.in_fence); + + dma_fence_put(exec->bin.done_fence); + dma_fence_put(exec->render.done_fence); + + dma_fence_put(exec->bin_done_fence); + + for (i = 0; i < exec->bo_count; i++) + drm_gem_object_put_unlocked(&exec->bo[i]->base); + kvfree(exec->bo); + + list_for_each_entry_safe(bo, save, &exec->unref_list, unref_head) { + drm_gem_object_put_unlocked(&bo->base); + } + + pm_runtime_mark_last_busy(v3d->dev); + pm_runtime_put_autosuspend(v3d->dev); + + kfree(exec); +} + +void v3d_exec_put(struct v3d_exec_info *exec) +{ + kref_put(&exec->refcount, v3d_exec_cleanup); +} + +int +v3d_wait_bo_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + int ret; + struct drm_v3d_wait_bo *args = data; + struct drm_gem_object *gem_obj; + struct v3d_bo *bo; + ktime_t start = ktime_get(); + u64 delta_ns; + unsigned long timeout_jiffies = + nsecs_to_jiffies_timeout(args->timeout_ns); + + if (args->pad != 0) + return -EINVAL; + + gem_obj = drm_gem_object_lookup(file_priv, args->handle); + if (!gem_obj) { + DRM_DEBUG("Failed to look up GEM BO %d\n", args->handle); + return -EINVAL; + } + bo = to_v3d_bo(gem_obj); + + ret = reservation_object_wait_timeout_rcu(bo->resv, + true, true, + timeout_jiffies); + + if (ret == 0) + ret = -ETIME; + else if (ret > 0) + ret = 0; + + /* Decrement the user's timeout, in case we got interrupted + * such that the ioctl will be restarted. + */ + delta_ns = ktime_to_ns(ktime_sub(ktime_get(), start)); + if (delta_ns < args->timeout_ns) + args->timeout_ns -= delta_ns; + else + args->timeout_ns = 0; + + /* Asked to wait beyond the jiffie/scheduler precision? */ + if (ret == -ETIME && args->timeout_ns) + ret = -EAGAIN; + + drm_gem_object_put_unlocked(gem_obj); + + return ret; +} + +/** + * v3d_submit_cl_ioctl() - Submits a job (frame) to the V3D. + * @dev: DRM device + * @data: ioctl argument + * @file_priv: DRM file for this fd + * + * This is the main entrypoint for userspace to submit a 3D frame to + * the GPU. Userspace provides the binner command list (if + * applicable), and the kernel sets up the render command list to draw + * to the framebuffer described in the ioctl, using the command lists + * that the 3D engine's binner will produce. + */ +int +v3d_submit_cl_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct v3d_dev *v3d = to_v3d_dev(dev); + struct v3d_file_priv *v3d_priv = file_priv->driver_priv; + struct drm_v3d_submit_cl *args = data; + struct v3d_exec_info *exec; + struct ww_acquire_ctx acquire_ctx; + struct drm_syncobj *sync_out; + int ret = 0; + + if (args->pad != 0) { + DRM_INFO("pad must be zero: %d\n", args->pad); + return -EINVAL; + } + + exec = kcalloc(1, sizeof(*exec), GFP_KERNEL); + if (!exec) + return -ENOMEM; + + ret = pm_runtime_get_sync(v3d->dev); + if (ret < 0) { + kfree(exec); + return ret; + } + + kref_init(&exec->refcount); + + ret = drm_syncobj_find_fence(file_priv, args->in_sync_bcl, + &exec->bin.in_fence); + if (ret == -EINVAL) + goto fail; + + ret = drm_syncobj_find_fence(file_priv, args->in_sync_rcl, + &exec->render.in_fence); + if (ret == -EINVAL) + goto fail; + + exec->qma = args->qma; + exec->qms = args->qms; + exec->qts = args->qts; + exec->bin.exec = exec; + exec->bin.start = args->bcl_start; + exec->bin.end = args->bcl_end; + exec->render.exec = exec; + exec->render.start = args->rcl_start; + exec->render.end = args->rcl_end; + exec->v3d = v3d; + INIT_LIST_HEAD(&exec->unref_list); + + ret = v3d_cl_lookup_bos(dev, file_priv, args, exec); + if (ret) + goto fail; + + ret = v3d_lock_bo_reservations(dev, exec, &acquire_ctx); + if (ret) + goto fail; + + if (exec->bin.start != exec->bin.end) { + ret = drm_sched_job_init(&exec->bin.base, + &v3d->queue[V3D_BIN].sched, + &v3d_priv->sched_entity[V3D_BIN], + v3d_priv); + if (ret) + goto fail_unreserve; + + exec->bin_done_fence = + dma_fence_get(&exec->bin.base.s_fence->finished); + + kref_get(&exec->refcount); /* put by scheduler job completion */ + drm_sched_entity_push_job(&exec->bin.base, + &v3d_priv->sched_entity[V3D_BIN]); + } + + ret = drm_sched_job_init(&exec->render.base, + &v3d->queue[V3D_RENDER].sched, + &v3d_priv->sched_entity[V3D_RENDER], + v3d_priv); + if (ret) + goto fail_unreserve; + + kref_get(&exec->refcount); /* put by scheduler job completion */ + drm_sched_entity_push_job(&exec->render.base, + &v3d_priv->sched_entity[V3D_RENDER]); + + v3d_attach_object_fences(exec); + + v3d_unlock_bo_reservations(dev, exec, &acquire_ctx); + + /* Update the return sync object for the */ + sync_out = drm_syncobj_find(file_priv, args->out_sync); + if (sync_out) { + drm_syncobj_replace_fence(sync_out, + &exec->render.base.s_fence->finished); + drm_syncobj_put(sync_out); + } + + v3d_exec_put(exec); + + return 0; + +fail_unreserve: + v3d_unlock_bo_reservations(dev, exec, &acquire_ctx); +fail: + v3d_exec_put(exec); + + return ret; +} + +int +v3d_gem_init(struct drm_device *dev) +{ + struct v3d_dev *v3d = to_v3d_dev(dev); + u32 pt_size = 4096 * 1024; + int ret, i; + + for (i = 0; i < V3D_MAX_QUEUES; i++) + v3d->queue[i].fence_context = dma_fence_context_alloc(1); + + spin_lock_init(&v3d->mm_lock); + spin_lock_init(&v3d->job_lock); + mutex_init(&v3d->bo_lock); + mutex_init(&v3d->reset_lock); + + /* Note: We don't allocate address 0. Various bits of HW + * treat 0 as special, such as the occlusion query counters + * where 0 means "disabled". + */ + drm_mm_init(&v3d->mm, 1, pt_size / sizeof(u32) - 1); + + v3d->pt = dma_alloc_wc(v3d->dev, pt_size, + &v3d->pt_paddr, + GFP_KERNEL | __GFP_NOWARN | __GFP_ZERO); + if (!v3d->pt) { + drm_mm_takedown(&v3d->mm); + dev_err(v3d->dev, + "Failed to allocate page tables. " + "Please ensure you have CMA enabled.\n"); + return -ENOMEM; + } + + v3d_init_hw_state(v3d); + v3d_mmu_set_page_table(v3d); + + ret = v3d_sched_init(v3d); + if (ret) { + drm_mm_takedown(&v3d->mm); + dma_free_coherent(v3d->dev, 4096 * 1024, (void *)v3d->pt, + v3d->pt_paddr); + } + + return 0; +} + +void +v3d_gem_destroy(struct drm_device *dev) +{ + struct v3d_dev *v3d = to_v3d_dev(dev); + enum v3d_queue q; + + v3d_sched_fini(v3d); + + /* Waiting for exec to finish would need to be done before + * unregistering V3D. + */ + for (q = 0; q < V3D_MAX_QUEUES; q++) { + WARN_ON(v3d->queue[q].emit_seqno != + v3d->queue[q].finished_seqno); + } + + drm_mm_takedown(&v3d->mm); + + dma_free_coherent(v3d->dev, 4096 * 1024, (void *)v3d->pt, v3d->pt_paddr); +} diff --git a/drivers/gpu/drm/v3d/v3d_irq.c b/drivers/gpu/drm/v3d/v3d_irq.c new file mode 100644 index 000000000000..77e1fa046c10 --- /dev/null +++ b/drivers/gpu/drm/v3d/v3d_irq.c @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2014-2018 Broadcom */ + +/** + * DOC: Interrupt management for the V3D engine + * + * When we take a binning or rendering flush done interrupt, we need + * to signal the fence for that job so that the scheduler can queue up + * the next one and unblock any waiters. + * + * When we take the binner out of memory interrupt, we need to + * allocate some new memory and pass it to the binner so that the + * current job can make progress. + */ + +#include "v3d_drv.h" +#include "v3d_regs.h" + +#define V3D_CORE_IRQS ((u32)(V3D_INT_OUTOMEM | \ + V3D_INT_FLDONE | \ + V3D_INT_FRDONE | \ + V3D_INT_GMPV)) + +#define V3D_HUB_IRQS ((u32)(V3D_HUB_INT_MMU_WRV | \ + V3D_HUB_INT_MMU_PTI | \ + V3D_HUB_INT_MMU_CAP)) + +static void +v3d_overflow_mem_work(struct work_struct *work) +{ + struct v3d_dev *v3d = + container_of(work, struct v3d_dev, overflow_mem_work); + struct drm_device *dev = &v3d->drm; + struct v3d_bo *bo = v3d_bo_create(dev, NULL /* XXX: GMP */, 256 * 1024); + unsigned long irqflags; + + if (IS_ERR(bo)) { + DRM_ERROR("Couldn't allocate binner overflow mem\n"); + return; + } + + /* We lost a race, and our work task came in after the bin job + * completed and exited. This can happen because the HW + * signals OOM before it's fully OOM, so the binner might just + * barely complete. + * + * If we lose the race and our work task comes in after a new + * bin job got scheduled, that's fine. We'll just give them + * some binner pool anyway. + */ + spin_lock_irqsave(&v3d->job_lock, irqflags); + if (!v3d->bin_job) { + spin_unlock_irqrestore(&v3d->job_lock, irqflags); + goto out; + } + + drm_gem_object_get(&bo->base); + list_add_tail(&bo->unref_head, &v3d->bin_job->unref_list); + spin_unlock_irqrestore(&v3d->job_lock, irqflags); + + V3D_CORE_WRITE(0, V3D_PTB_BPOA, bo->node.start << PAGE_SHIFT); + V3D_CORE_WRITE(0, V3D_PTB_BPOS, bo->base.size); + +out: + drm_gem_object_put_unlocked(&bo->base); +} + +static irqreturn_t +v3d_irq(int irq, void *arg) +{ + struct v3d_dev *v3d = arg; + u32 intsts; + irqreturn_t status = IRQ_NONE; + + intsts = V3D_CORE_READ(0, V3D_CTL_INT_STS); + + /* Acknowledge the interrupts we're handling here. */ + V3D_CORE_WRITE(0, V3D_CTL_INT_CLR, intsts); + + if (intsts & V3D_INT_OUTOMEM) { + /* Note that the OOM status is edge signaled, so the + * interrupt won't happen again until the we actually + * add more memory. + */ + schedule_work(&v3d->overflow_mem_work); + status = IRQ_HANDLED; + } + + if (intsts & V3D_INT_FLDONE) { + v3d->queue[V3D_BIN].finished_seqno++; + dma_fence_signal(v3d->bin_job->bin.done_fence); + status = IRQ_HANDLED; + } + + if (intsts & V3D_INT_FRDONE) { + v3d->queue[V3D_RENDER].finished_seqno++; + dma_fence_signal(v3d->render_job->render.done_fence); + + status = IRQ_HANDLED; + } + + /* We shouldn't be triggering these if we have GMP in + * always-allowed mode. + */ + if (intsts & V3D_INT_GMPV) + dev_err(v3d->dev, "GMP violation\n"); + + return status; +} + +static irqreturn_t +v3d_hub_irq(int irq, void *arg) +{ + struct v3d_dev *v3d = arg; + u32 intsts; + irqreturn_t status = IRQ_NONE; + + intsts = V3D_READ(V3D_HUB_INT_STS); + + /* Acknowledge the interrupts we're handling here. */ + V3D_WRITE(V3D_HUB_INT_CLR, intsts); + + if (intsts & (V3D_HUB_INT_MMU_WRV | + V3D_HUB_INT_MMU_PTI | + V3D_HUB_INT_MMU_CAP)) { + u32 axi_id = V3D_READ(V3D_MMU_VIO_ID); + u64 vio_addr = (u64)V3D_READ(V3D_MMU_VIO_ADDR) << 8; + + dev_err(v3d->dev, "MMU error from client %d at 0x%08llx%s%s%s\n", + axi_id, (long long)vio_addr, + ((intsts & V3D_HUB_INT_MMU_WRV) ? + ", write violation" : ""), + ((intsts & V3D_HUB_INT_MMU_PTI) ? + ", pte invalid" : ""), + ((intsts & V3D_HUB_INT_MMU_CAP) ? + ", cap exceeded" : "")); + status = IRQ_HANDLED; + } + + return status; +} + +void +v3d_irq_init(struct v3d_dev *v3d) +{ + int ret, core; + + INIT_WORK(&v3d->overflow_mem_work, v3d_overflow_mem_work); + + /* Clear any pending interrupts someone might have left around + * for us. + */ + for (core = 0; core < v3d->cores; core++) + V3D_CORE_WRITE(core, V3D_CTL_INT_CLR, V3D_CORE_IRQS); + V3D_WRITE(V3D_HUB_INT_CLR, V3D_HUB_IRQS); + + ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0), + v3d_hub_irq, IRQF_SHARED, + "v3d_hub", v3d); + ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 1), + v3d_irq, IRQF_SHARED, + "v3d_core0", v3d); + if (ret) + dev_err(v3d->dev, "IRQ setup failed: %d\n", ret); + + v3d_irq_enable(v3d); +} + +void +v3d_irq_enable(struct v3d_dev *v3d) +{ + int core; + + /* Enable our set of interrupts, masking out any others. */ + for (core = 0; core < v3d->cores; core++) { + V3D_CORE_WRITE(core, V3D_CTL_INT_MSK_SET, ~V3D_CORE_IRQS); + V3D_CORE_WRITE(core, V3D_CTL_INT_MSK_CLR, V3D_CORE_IRQS); + } + + V3D_WRITE(V3D_HUB_INT_MSK_SET, ~V3D_HUB_IRQS); + V3D_WRITE(V3D_HUB_INT_MSK_CLR, V3D_HUB_IRQS); +} + +void +v3d_irq_disable(struct v3d_dev *v3d) +{ + int core; + + /* Disable all interrupts. */ + for (core = 0; core < v3d->cores; core++) + V3D_CORE_WRITE(core, V3D_CTL_INT_MSK_SET, ~0); + V3D_WRITE(V3D_HUB_INT_MSK_SET, ~0); + + /* Clear any pending interrupts we might have left. */ + for (core = 0; core < v3d->cores; core++) + V3D_CORE_WRITE(core, V3D_CTL_INT_CLR, V3D_CORE_IRQS); + V3D_WRITE(V3D_HUB_INT_CLR, V3D_HUB_IRQS); + + cancel_work_sync(&v3d->overflow_mem_work); +} + +/** Reinitializes interrupt registers when a GPU reset is performed. */ +void v3d_irq_reset(struct v3d_dev *v3d) +{ + v3d_irq_enable(v3d); +} diff --git a/drivers/gpu/drm/v3d/v3d_mmu.c b/drivers/gpu/drm/v3d/v3d_mmu.c new file mode 100644 index 000000000000..b00f97c31b70 --- /dev/null +++ b/drivers/gpu/drm/v3d/v3d_mmu.c @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2017-2018 Broadcom */ + +/** + * DOC: Broadcom V3D MMU + * + * The V3D 3.x hardware (compared to VC4) now includes an MMU. It has + * a single level of page tables for the V3D's 4GB address space to + * map to AXI bus addresses, thus it could need up to 4MB of + * physically contiguous memory to store the PTEs. + * + * Because the 4MB of contiguous memory for page tables is precious, + * and switching between them is expensive, we load all BOs into the + * same 4GB address space. + * + * To protect clients from each other, we should use the GMP to + * quickly mask out (at 128kb granularity) what pages are available to + * each client. This is not yet implemented. + */ + +#include "v3d_drv.h" +#include "v3d_regs.h" + +#define V3D_MMU_PAGE_SHIFT 12 + +/* Note: All PTEs for the 1MB superpage must be filled with the + * superpage bit set. + */ +#define V3D_PTE_SUPERPAGE BIT(31) +#define V3D_PTE_WRITEABLE BIT(29) +#define V3D_PTE_VALID BIT(28) + +static int v3d_mmu_flush_all(struct v3d_dev *v3d) +{ + int ret; + + /* Make sure that another flush isn't already running when we + * start this one. + */ + ret = wait_for(!(V3D_READ(V3D_MMU_CTL) & + V3D_MMU_CTL_TLB_CLEARING), 100); + if (ret) + dev_err(v3d->dev, "TLB clear wait idle pre-wait failed\n"); + + V3D_WRITE(V3D_MMU_CTL, V3D_READ(V3D_MMU_CTL) | + V3D_MMU_CTL_TLB_CLEAR); + + V3D_WRITE(V3D_MMUC_CONTROL, + V3D_MMUC_CONTROL_FLUSH | + V3D_MMUC_CONTROL_ENABLE); + + ret = wait_for(!(V3D_READ(V3D_MMU_CTL) & + V3D_MMU_CTL_TLB_CLEARING), 100); + if (ret) { + dev_err(v3d->dev, "TLB clear wait idle failed\n"); + return ret; + } + + ret = wait_for(!(V3D_READ(V3D_MMUC_CONTROL) & + V3D_MMUC_CONTROL_FLUSHING), 100); + if (ret) + dev_err(v3d->dev, "MMUC flush wait idle failed\n"); + + return ret; +} + +int v3d_mmu_set_page_table(struct v3d_dev *v3d) +{ + V3D_WRITE(V3D_MMU_PT_PA_BASE, v3d->pt_paddr >> V3D_MMU_PAGE_SHIFT); + V3D_WRITE(V3D_MMU_CTL, + V3D_MMU_CTL_ENABLE | + V3D_MMU_CTL_PT_INVALID | + V3D_MMU_CTL_PT_INVALID_ABORT | + V3D_MMU_CTL_WRITE_VIOLATION_ABORT | + V3D_MMU_CTL_CAP_EXCEEDED_ABORT); + V3D_WRITE(V3D_MMU_ILLEGAL_ADDR, + (v3d->mmu_scratch_paddr >> V3D_MMU_PAGE_SHIFT) | + V3D_MMU_ILLEGAL_ADDR_ENABLE); + V3D_WRITE(V3D_MMUC_CONTROL, V3D_MMUC_CONTROL_ENABLE); + + return v3d_mmu_flush_all(v3d); +} + +void v3d_mmu_insert_ptes(struct v3d_bo *bo) +{ + struct v3d_dev *v3d = to_v3d_dev(bo->base.dev); + u32 page = bo->node.start; + u32 page_prot = V3D_PTE_WRITEABLE | V3D_PTE_VALID; + unsigned int count; + struct scatterlist *sgl; + + for_each_sg(bo->sgt->sgl, sgl, bo->sgt->nents, count) { + u32 page_address = sg_dma_address(sgl) >> V3D_MMU_PAGE_SHIFT; + u32 pte = page_prot | page_address; + u32 i; + + BUG_ON(page_address + (sg_dma_len(sgl) >> V3D_MMU_PAGE_SHIFT) >= + BIT(24)); + + for (i = 0; i < sg_dma_len(sgl) >> V3D_MMU_PAGE_SHIFT; i++) + v3d->pt[page++] = pte + i; + } + + WARN_ON_ONCE(page - bo->node.start != + bo->base.size >> V3D_MMU_PAGE_SHIFT); + + if (v3d_mmu_flush_all(v3d)) + dev_err(v3d->dev, "MMU flush timeout\n"); +} + +void v3d_mmu_remove_ptes(struct v3d_bo *bo) +{ + struct v3d_dev *v3d = to_v3d_dev(bo->base.dev); + u32 npages = bo->base.size >> V3D_MMU_PAGE_SHIFT; + u32 page; + + for (page = bo->node.start; page < bo->node.start + npages; page++) + v3d->pt[page] = 0; + + if (v3d_mmu_flush_all(v3d)) + dev_err(v3d->dev, "MMU flush timeout\n"); +} diff --git a/drivers/gpu/drm/v3d/v3d_regs.h b/drivers/gpu/drm/v3d/v3d_regs.h new file mode 100644 index 000000000000..fc13282dfc2f --- /dev/null +++ b/drivers/gpu/drm/v3d/v3d_regs.h @@ -0,0 +1,295 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2017-2018 Broadcom */ + +#ifndef V3D_REGS_H +#define V3D_REGS_H + +#include <linux/bitops.h> + +#define V3D_MASK(high, low) ((u32)GENMASK(high, low)) +/* Using the GNU statement expression extension */ +#define V3D_SET_FIELD(value, field) \ + ({ \ + u32 fieldval = (value) << field##_SHIFT; \ + WARN_ON((fieldval & ~field##_MASK) != 0); \ + fieldval & field##_MASK; \ + }) + +#define V3D_GET_FIELD(word, field) (((word) & field##_MASK) >> \ + field##_SHIFT) + +/* Hub registers for shared hardware between V3D cores. */ + +#define V3D_HUB_AXICFG 0x00000 +# define V3D_HUB_AXICFG_MAX_LEN_MASK V3D_MASK(3, 0) +# define V3D_HUB_AXICFG_MAX_LEN_SHIFT 0 +#define V3D_HUB_UIFCFG 0x00004 +#define V3D_HUB_IDENT0 0x00008 + +#define V3D_HUB_IDENT1 0x0000c +# define V3D_HUB_IDENT1_WITH_MSO BIT(19) +# define V3D_HUB_IDENT1_WITH_TSY BIT(18) +# define V3D_HUB_IDENT1_WITH_TFU BIT(17) +# define V3D_HUB_IDENT1_WITH_L3C BIT(16) +# define V3D_HUB_IDENT1_NHOSTS_MASK V3D_MASK(15, 12) +# define V3D_HUB_IDENT1_NHOSTS_SHIFT 12 +# define V3D_HUB_IDENT1_NCORES_MASK V3D_MASK(11, 8) +# define V3D_HUB_IDENT1_NCORES_SHIFT 8 +# define V3D_HUB_IDENT1_REV_MASK V3D_MASK(7, 4) +# define V3D_HUB_IDENT1_REV_SHIFT 4 +# define V3D_HUB_IDENT1_TVER_MASK V3D_MASK(3, 0) +# define V3D_HUB_IDENT1_TVER_SHIFT 0 + +#define V3D_HUB_IDENT2 0x00010 +# define V3D_HUB_IDENT2_WITH_MMU BIT(8) +# define V3D_HUB_IDENT2_L3C_NKB_MASK V3D_MASK(7, 0) +# define V3D_HUB_IDENT2_L3C_NKB_SHIFT 0 + +#define V3D_HUB_IDENT3 0x00014 +# define V3D_HUB_IDENT3_IPREV_MASK V3D_MASK(15, 8) +# define V3D_HUB_IDENT3_IPREV_SHIFT 8 +# define V3D_HUB_IDENT3_IPIDX_MASK V3D_MASK(7, 0) +# define V3D_HUB_IDENT3_IPIDX_SHIFT 0 + +#define V3D_HUB_INT_STS 0x00050 +#define V3D_HUB_INT_SET 0x00054 +#define V3D_HUB_INT_CLR 0x00058 +#define V3D_HUB_INT_MSK_STS 0x0005c +#define V3D_HUB_INT_MSK_SET 0x00060 +#define V3D_HUB_INT_MSK_CLR 0x00064 +# define V3D_HUB_INT_MMU_WRV BIT(5) +# define V3D_HUB_INT_MMU_PTI BIT(4) +# define V3D_HUB_INT_MMU_CAP BIT(3) +# define V3D_HUB_INT_MSO BIT(2) +# define V3D_HUB_INT_TFUC BIT(1) +# define V3D_HUB_INT_TFUF BIT(0) + +#define V3D_GCA_CACHE_CTRL 0x0000c +# define V3D_GCA_CACHE_CTRL_FLUSH BIT(0) + +#define V3D_GCA_SAFE_SHUTDOWN 0x000b0 +# define V3D_GCA_SAFE_SHUTDOWN_EN BIT(0) + +#define V3D_GCA_SAFE_SHUTDOWN_ACK 0x000b4 +# define V3D_GCA_SAFE_SHUTDOWN_ACK_ACKED 3 + +# define V3D_TOP_GR_BRIDGE_REVISION 0x00000 +# define V3D_TOP_GR_BRIDGE_MAJOR_MASK V3D_MASK(15, 8) +# define V3D_TOP_GR_BRIDGE_MAJOR_SHIFT 8 +# define V3D_TOP_GR_BRIDGE_MINOR_MASK V3D_MASK(7, 0) +# define V3D_TOP_GR_BRIDGE_MINOR_SHIFT 0 + +/* 7268 reset reg */ +# define V3D_TOP_GR_BRIDGE_SW_INIT_0 0x00008 +# define V3D_TOP_GR_BRIDGE_SW_INIT_0_V3D_CLK_108_SW_INIT BIT(0) +/* 7278 reset reg */ +# define V3D_TOP_GR_BRIDGE_SW_INIT_1 0x0000c +# define V3D_TOP_GR_BRIDGE_SW_INIT_1_V3D_CLK_108_SW_INIT BIT(0) + +/* Per-MMU registers. */ + +#define V3D_MMUC_CONTROL 0x01000 +# define V3D_MMUC_CONTROL_CLEAR BIT(3) +# define V3D_MMUC_CONTROL_FLUSHING BIT(2) +# define V3D_MMUC_CONTROL_FLUSH BIT(1) +# define V3D_MMUC_CONTROL_ENABLE BIT(0) + +#define V3D_MMU_CTL 0x01200 +# define V3D_MMU_CTL_CAP_EXCEEDED BIT(27) +# define V3D_MMU_CTL_CAP_EXCEEDED_ABORT BIT(26) +# define V3D_MMU_CTL_CAP_EXCEEDED_INT BIT(25) +# define V3D_MMU_CTL_CAP_EXCEEDED_EXCEPTION BIT(24) +# define V3D_MMU_CTL_PT_INVALID BIT(20) +# define V3D_MMU_CTL_PT_INVALID_ABORT BIT(19) +# define V3D_MMU_CTL_PT_INVALID_INT BIT(18) +# define V3D_MMU_CTL_PT_INVALID_EXCEPTION BIT(17) +# define V3D_MMU_CTL_WRITE_VIOLATION BIT(16) +# define V3D_MMU_CTL_WRITE_VIOLATION_ABORT BIT(11) +# define V3D_MMU_CTL_WRITE_VIOLATION_INT BIT(10) +# define V3D_MMU_CTL_WRITE_VIOLATION_EXCEPTION BIT(9) +# define V3D_MMU_CTL_TLB_CLEARING BIT(7) +# define V3D_MMU_CTL_TLB_STATS_CLEAR BIT(3) +# define V3D_MMU_CTL_TLB_CLEAR BIT(2) +# define V3D_MMU_CTL_TLB_STATS_ENABLE BIT(1) +# define V3D_MMU_CTL_ENABLE BIT(0) + +#define V3D_MMU_PT_PA_BASE 0x01204 +#define V3D_MMU_HIT 0x01208 +#define V3D_MMU_MISSES 0x0120c +#define V3D_MMU_STALLS 0x01210 + +#define V3D_MMU_ADDR_CAP 0x01214 +# define V3D_MMU_ADDR_CAP_ENABLE BIT(31) +# define V3D_MMU_ADDR_CAP_MPAGE_MASK V3D_MASK(11, 0) +# define V3D_MMU_ADDR_CAP_MPAGE_SHIFT 0 + +#define V3D_MMU_SHOOT_DOWN 0x01218 +# define V3D_MMU_SHOOT_DOWN_SHOOTING BIT(29) +# define V3D_MMU_SHOOT_DOWN_SHOOT BIT(28) +# define V3D_MMU_SHOOT_DOWN_PAGE_MASK V3D_MASK(27, 0) +# define V3D_MMU_SHOOT_DOWN_PAGE_SHIFT 0 + +#define V3D_MMU_BYPASS_START 0x0121c +#define V3D_MMU_BYPASS_END 0x01220 + +/* AXI ID of the access that faulted */ +#define V3D_MMU_VIO_ID 0x0122c + +/* Address for illegal PTEs to return */ +#define V3D_MMU_ILLEGAL_ADDR 0x01230 +# define V3D_MMU_ILLEGAL_ADDR_ENABLE BIT(31) + +/* Address that faulted */ +#define V3D_MMU_VIO_ADDR 0x01234 + +/* Per-V3D-core registers */ + +#define V3D_CTL_IDENT0 0x00000 +# define V3D_IDENT0_VER_MASK V3D_MASK(31, 24) +# define V3D_IDENT0_VER_SHIFT 24 + +#define V3D_CTL_IDENT1 0x00004 +/* Multiples of 1kb */ +# define V3D_IDENT1_VPM_SIZE_MASK V3D_MASK(31, 28) +# define V3D_IDENT1_VPM_SIZE_SHIFT 28 +# define V3D_IDENT1_NSEM_MASK V3D_MASK(23, 16) +# define V3D_IDENT1_NSEM_SHIFT 16 +# define V3D_IDENT1_NTMU_MASK V3D_MASK(15, 12) +# define V3D_IDENT1_NTMU_SHIFT 12 +# define V3D_IDENT1_QUPS_MASK V3D_MASK(11, 8) +# define V3D_IDENT1_QUPS_SHIFT 8 +# define V3D_IDENT1_NSLC_MASK V3D_MASK(7, 4) +# define V3D_IDENT1_NSLC_SHIFT 4 +# define V3D_IDENT1_REV_MASK V3D_MASK(3, 0) +# define V3D_IDENT1_REV_SHIFT 0 + +#define V3D_CTL_IDENT2 0x00008 +# define V3D_IDENT2_BCG_INT BIT(28) + +#define V3D_CTL_MISCCFG 0x00018 +# define V3D_MISCCFG_OVRTMUOUT BIT(0) + +#define V3D_CTL_L2CACTL 0x00020 +# define V3D_L2CACTL_L2CCLR BIT(2) +# define V3D_L2CACTL_L2CDIS BIT(1) +# define V3D_L2CACTL_L2CENA BIT(0) + +#define V3D_CTL_SLCACTL 0x00024 +# define V3D_SLCACTL_TVCCS_MASK V3D_MASK(27, 24) +# define V3D_SLCACTL_TVCCS_SHIFT 24 +# define V3D_SLCACTL_TDCCS_MASK V3D_MASK(19, 16) +# define V3D_SLCACTL_TDCCS_SHIFT 16 +# define V3D_SLCACTL_UCC_MASK V3D_MASK(11, 8) +# define V3D_SLCACTL_UCC_SHIFT 8 +# define V3D_SLCACTL_ICC_MASK V3D_MASK(3, 0) +# define V3D_SLCACTL_ICC_SHIFT 0 + +#define V3D_CTL_L2TCACTL 0x00030 +# define V3D_L2TCACTL_TMUWCF BIT(8) +# define V3D_L2TCACTL_L2T_NO_WM BIT(4) +# define V3D_L2TCACTL_FLM_FLUSH 0 +# define V3D_L2TCACTL_FLM_CLEAR 1 +# define V3D_L2TCACTL_FLM_CLEAN 2 +# define V3D_L2TCACTL_FLM_MASK V3D_MASK(2, 1) +# define V3D_L2TCACTL_FLM_SHIFT 1 +# define V3D_L2TCACTL_L2TFLS BIT(0) +#define V3D_CTL_L2TFLSTA 0x00034 +#define V3D_CTL_L2TFLEND 0x00038 + +#define V3D_CTL_INT_STS 0x00050 +#define V3D_CTL_INT_SET 0x00054 +#define V3D_CTL_INT_CLR 0x00058 +#define V3D_CTL_INT_MSK_STS 0x0005c +#define V3D_CTL_INT_MSK_SET 0x00060 +#define V3D_CTL_INT_MSK_CLR 0x00064 +# define V3D_INT_QPU_MASK V3D_MASK(27, 16) +# define V3D_INT_QPU_SHIFT 16 +# define V3D_INT_GMPV BIT(5) +# define V3D_INT_TRFB BIT(4) +# define V3D_INT_SPILLUSE BIT(3) +# define V3D_INT_OUTOMEM BIT(2) +# define V3D_INT_FLDONE BIT(1) +# define V3D_INT_FRDONE BIT(0) + +#define V3D_CLE_CT0CS 0x00100 +#define V3D_CLE_CT1CS 0x00104 +#define V3D_CLE_CTNCS(n) (V3D_CLE_CT0CS + 4 * n) +#define V3D_CLE_CT0EA 0x00108 +#define V3D_CLE_CT1EA 0x0010c +#define V3D_CLE_CTNEA(n) (V3D_CLE_CT0EA + 4 * n) +#define V3D_CLE_CT0CA 0x00110 +#define V3D_CLE_CT1CA 0x00114 +#define V3D_CLE_CTNCA(n) (V3D_CLE_CT0CA + 4 * n) +#define V3D_CLE_CT0RA 0x00118 +#define V3D_CLE_CT1RA 0x0011c +#define V3D_CLE_CT0LC 0x00120 +#define V3D_CLE_CT1LC 0x00124 +#define V3D_CLE_CT0PC 0x00128 +#define V3D_CLE_CT1PC 0x0012c +#define V3D_CLE_PCS 0x00130 +#define V3D_CLE_BFC 0x00134 +#define V3D_CLE_RFC 0x00138 +#define V3D_CLE_TFBC 0x0013c +#define V3D_CLE_TFIT 0x00140 +#define V3D_CLE_CT1CFG 0x00144 +#define V3D_CLE_CT1TILECT 0x00148 +#define V3D_CLE_CT1TSKIP 0x0014c +#define V3D_CLE_CT1PTCT 0x00150 +#define V3D_CLE_CT0SYNC 0x00154 +#define V3D_CLE_CT1SYNC 0x00158 +#define V3D_CLE_CT0QTS 0x0015c +# define V3D_CLE_CT0QTS_ENABLE BIT(1) +#define V3D_CLE_CT0QBA 0x00160 +#define V3D_CLE_CT1QBA 0x00164 +#define V3D_CLE_CTNQBA(n) (V3D_CLE_CT0QBA + 4 * n) +#define V3D_CLE_CT0QEA 0x00168 +#define V3D_CLE_CT1QEA 0x0016c +#define V3D_CLE_CTNQEA(n) (V3D_CLE_CT0QEA + 4 * n) +#define V3D_CLE_CT0QMA 0x00170 +#define V3D_CLE_CT0QMS 0x00174 +#define V3D_CLE_CT1QCFG 0x00178 +/* If set without ETPROC, entirely skip tiles with no primitives. */ +# define V3D_CLE_QCFG_ETFILT BIT(7) +/* If set with ETFILT, just write the clear color to tiles with no + * primitives. + */ +# define V3D_CLE_QCFG_ETPROC BIT(6) +# define V3D_CLE_QCFG_ETSFLUSH BIT(1) +# define V3D_CLE_QCFG_MCDIS BIT(0) + +#define V3D_PTB_BPCA 0x00300 +#define V3D_PTB_BPCS 0x00304 +#define V3D_PTB_BPOA 0x00308 +#define V3D_PTB_BPOS 0x0030c + +#define V3D_PTB_BXCF 0x00310 +# define V3D_PTB_BXCF_RWORDERDISA BIT(1) +# define V3D_PTB_BXCF_CLIPDISA BIT(0) + +#define V3D_GMP_STATUS 0x00800 +# define V3D_GMP_STATUS_GMPRST BIT(31) +# define V3D_GMP_STATUS_WR_COUNT_MASK V3D_MASK(30, 24) +# define V3D_GMP_STATUS_WR_COUNT_SHIFT 24 +# define V3D_GMP_STATUS_RD_COUNT_MASK V3D_MASK(22, 16) +# define V3D_GMP_STATUS_RD_COUNT_SHIFT 16 +# define V3D_GMP_STATUS_WR_ACTIVE BIT(5) +# define V3D_GMP_STATUS_RD_ACTIVE BIT(4) +# define V3D_GMP_STATUS_CFG_BUSY BIT(3) +# define V3D_GMP_STATUS_CNTOVF BIT(2) +# define V3D_GMP_STATUS_INVPROT BIT(1) +# define V3D_GMP_STATUS_VIO BIT(0) + +#define V3D_GMP_CFG 0x00804 +# define V3D_GMP_CFG_LBURSTEN BIT(3) +# define V3D_GMP_CFG_PGCRSEN BIT() +# define V3D_GMP_CFG_STOP_REQ BIT(1) +# define V3D_GMP_CFG_PROT_ENABLE BIT(0) + +#define V3D_GMP_VIO_ADDR 0x00808 +#define V3D_GMP_VIO_TYPE 0x0080c +#define V3D_GMP_TABLE_ADDR 0x00810 +#define V3D_GMP_CLEAR_LOAD 0x00814 +#define V3D_GMP_PRESERVE_LOAD 0x00818 +#define V3D_GMP_VALID_LINES 0x00820 + +#endif /* V3D_REGS_H */ diff --git a/drivers/gpu/drm/v3d/v3d_sched.c b/drivers/gpu/drm/v3d/v3d_sched.c new file mode 100644 index 000000000000..b07bece9417d --- /dev/null +++ b/drivers/gpu/drm/v3d/v3d_sched.c @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2018 Broadcom */ + +/** + * DOC: Broadcom V3D scheduling + * + * The shared DRM GPU scheduler is used to coordinate submitting jobs + * to the hardware. Each DRM fd (roughly a client process) gets its + * own scheduler entity, which will process jobs in order. The GPU + * scheduler will round-robin between clients to submit the next job. + * + * For simplicity, and in order to keep latency low for interactive + * jobs when bulk background jobs are queued up, we submit a new job + * to the HW only when it has completed the last one, instead of + * filling up the CT[01]Q FIFOs with jobs. Similarly, we use + * v3d_job_dependency() to manage the dependency between bin and + * render, instead of having the clients submit jobs with using the + * HW's semaphores to interlock between them. + */ + +#include <linux/kthread.h> + +#include "v3d_drv.h" +#include "v3d_regs.h" +#include "v3d_trace.h" + +static struct v3d_job * +to_v3d_job(struct drm_sched_job *sched_job) +{ + return container_of(sched_job, struct v3d_job, base); +} + +static void +v3d_job_free(struct drm_sched_job *sched_job) +{ + struct v3d_job *job = to_v3d_job(sched_job); + + v3d_exec_put(job->exec); +} + +/** + * Returns the fences that the bin job depends on, one by one. + * v3d_job_run() won't be called until all of them have been signaled. + */ +static struct dma_fence * +v3d_job_dependency(struct drm_sched_job *sched_job, + struct drm_sched_entity *s_entity) +{ + struct v3d_job *job = to_v3d_job(sched_job); + struct v3d_exec_info *exec = job->exec; + enum v3d_queue q = job == &exec->bin ? V3D_BIN : V3D_RENDER; + struct dma_fence *fence; + + fence = job->in_fence; + if (fence) { + job->in_fence = NULL; + return fence; + } + + if (q == V3D_RENDER) { + /* If we had a bin job, the render job definitely depends on + * it. We first have to wait for bin to be scheduled, so that + * its done_fence is created. + */ + fence = exec->bin_done_fence; + if (fence) { + exec->bin_done_fence = NULL; + return fence; + } + } + + /* XXX: Wait on a fence for switching the GMP if necessary, + * and then do so. + */ + + return fence; +} + +static struct dma_fence *v3d_job_run(struct drm_sched_job *sched_job) +{ + struct v3d_job *job = to_v3d_job(sched_job); + struct v3d_exec_info *exec = job->exec; + enum v3d_queue q = job == &exec->bin ? V3D_BIN : V3D_RENDER; + struct v3d_dev *v3d = exec->v3d; + struct drm_device *dev = &v3d->drm; + struct dma_fence *fence; + unsigned long irqflags; + + if (unlikely(job->base.s_fence->finished.error)) + return NULL; + + /* Lock required around bin_job update vs + * v3d_overflow_mem_work(). + */ + spin_lock_irqsave(&v3d->job_lock, irqflags); + if (q == V3D_BIN) { + v3d->bin_job = job->exec; + + /* Clear out the overflow allocation, so we don't + * reuse the overflow attached to a previous job. + */ + V3D_CORE_WRITE(0, V3D_PTB_BPOS, 0); + } else { + v3d->render_job = job->exec; + } + spin_unlock_irqrestore(&v3d->job_lock, irqflags); + + /* Can we avoid this flush when q==RENDER? We need to be + * careful of scheduling, though -- imagine job0 rendering to + * texture and job1 reading, and them being executed as bin0, + * bin1, render0, render1, so that render1's flush at bin time + * wasn't enough. + */ + v3d_invalidate_caches(v3d); + + fence = v3d_fence_create(v3d, q); + if (!fence) + return fence; + + if (job->done_fence) + dma_fence_put(job->done_fence); + job->done_fence = dma_fence_get(fence); + + trace_v3d_submit_cl(dev, q == V3D_RENDER, to_v3d_fence(fence)->seqno, + job->start, job->end); + + if (q == V3D_BIN) { + if (exec->qma) { + V3D_CORE_WRITE(0, V3D_CLE_CT0QMA, exec->qma); + V3D_CORE_WRITE(0, V3D_CLE_CT0QMS, exec->qms); + } + if (exec->qts) { + V3D_CORE_WRITE(0, V3D_CLE_CT0QTS, + V3D_CLE_CT0QTS_ENABLE | + exec->qts); + } + } else { + /* XXX: Set the QCFG */ + } + + /* Set the current and end address of the control list. + * Writing the end register is what starts the job. + */ + V3D_CORE_WRITE(0, V3D_CLE_CTNQBA(q), job->start); + V3D_CORE_WRITE(0, V3D_CLE_CTNQEA(q), job->end); + + return fence; +} + +static void +v3d_job_timedout(struct drm_sched_job *sched_job) +{ + struct v3d_job *job = to_v3d_job(sched_job); + struct v3d_exec_info *exec = job->exec; + struct v3d_dev *v3d = exec->v3d; + enum v3d_queue q; + + mutex_lock(&v3d->reset_lock); + + /* block scheduler */ + for (q = 0; q < V3D_MAX_QUEUES; q++) { + struct drm_gpu_scheduler *sched = &v3d->queue[q].sched; + + kthread_park(sched->thread); + drm_sched_hw_job_reset(sched, (sched_job->sched == sched ? + sched_job : NULL)); + } + + /* get the GPU back into the init state */ + v3d_reset(v3d); + + /* Unblock schedulers and restart their jobs. */ + for (q = 0; q < V3D_MAX_QUEUES; q++) { + drm_sched_job_recovery(&v3d->queue[q].sched); + kthread_unpark(v3d->queue[q].sched.thread); + } + + mutex_unlock(&v3d->reset_lock); +} + +static const struct drm_sched_backend_ops v3d_sched_ops = { + .dependency = v3d_job_dependency, + .run_job = v3d_job_run, + .timedout_job = v3d_job_timedout, + .free_job = v3d_job_free +}; + +int +v3d_sched_init(struct v3d_dev *v3d) +{ + int hw_jobs_limit = 1; + int job_hang_limit = 0; + int hang_limit_ms = 500; + int ret; + + ret = drm_sched_init(&v3d->queue[V3D_BIN].sched, + &v3d_sched_ops, + hw_jobs_limit, job_hang_limit, + msecs_to_jiffies(hang_limit_ms), + "v3d_bin"); + if (ret) { + dev_err(v3d->dev, "Failed to create bin scheduler: %d.", ret); + return ret; + } + + ret = drm_sched_init(&v3d->queue[V3D_RENDER].sched, + &v3d_sched_ops, + hw_jobs_limit, job_hang_limit, + msecs_to_jiffies(hang_limit_ms), + "v3d_render"); + if (ret) { + dev_err(v3d->dev, "Failed to create render scheduler: %d.", + ret); + drm_sched_fini(&v3d->queue[V3D_BIN].sched); + return ret; + } + + return 0; +} + +void +v3d_sched_fini(struct v3d_dev *v3d) +{ + enum v3d_queue q; + + for (q = 0; q < V3D_MAX_QUEUES; q++) + drm_sched_fini(&v3d->queue[q].sched); +} diff --git a/drivers/gpu/drm/v3d/v3d_trace.h b/drivers/gpu/drm/v3d/v3d_trace.h new file mode 100644 index 000000000000..85dd351e1e09 --- /dev/null +++ b/drivers/gpu/drm/v3d/v3d_trace.h @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2015-2018 Broadcom */ + +#if !defined(_V3D_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ) +#define _V3D_TRACE_H_ + +#include <linux/stringify.h> +#include <linux/types.h> +#include <linux/tracepoint.h> + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM v3d +#define TRACE_INCLUDE_FILE v3d_trace + +TRACE_EVENT(v3d_submit_cl, + TP_PROTO(struct drm_device *dev, bool is_render, + uint64_t seqno, + u32 ctnqba, u32 ctnqea), + TP_ARGS(dev, is_render, seqno, ctnqba, ctnqea), + + TP_STRUCT__entry( + __field(u32, dev) + __field(bool, is_render) + __field(u64, seqno) + __field(u32, ctnqba) + __field(u32, ctnqea) + ), + + TP_fast_assign( + __entry->dev = dev->primary->index; + __entry->is_render = is_render; + __entry->seqno = seqno; + __entry->ctnqba = ctnqba; + __entry->ctnqea = ctnqea; + ), + + TP_printk("dev=%u, %s, seqno=%llu, 0x%08x..0x%08x", + __entry->dev, + __entry->is_render ? "RCL" : "BCL", + __entry->seqno, + __entry->ctnqba, + __entry->ctnqea) +); + +TRACE_EVENT(v3d_reset_begin, + TP_PROTO(struct drm_device *dev), + TP_ARGS(dev), + + TP_STRUCT__entry( + __field(u32, dev) + ), + + TP_fast_assign( + __entry->dev = dev->primary->index; + ), + + TP_printk("dev=%u", + __entry->dev) +); + +TRACE_EVENT(v3d_reset_end, + TP_PROTO(struct drm_device *dev), + TP_ARGS(dev), + + TP_STRUCT__entry( + __field(u32, dev) + ), + + TP_fast_assign( + __entry->dev = dev->primary->index; + ), + + TP_printk("dev=%u", + __entry->dev) +); + +#endif /* _V3D_TRACE_H_ */ + +/* This part must be outside protection */ +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . +#include <trace/define_trace.h> diff --git a/drivers/gpu/drm/v3d/v3d_trace_points.c b/drivers/gpu/drm/v3d/v3d_trace_points.c new file mode 100644 index 000000000000..482922d7c7e1 --- /dev/null +++ b/drivers/gpu/drm/v3d/v3d_trace_points.c @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2015 Broadcom */ + +#include "v3d_drv.h" + +#ifndef __CHECKER__ +#define CREATE_TRACE_POINTS +#include "v3d_trace.h" +#endif diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c index 40ddeaafd65f..d9b8b701d2ce 100644 --- a/drivers/gpu/drm/vc4/vc4_drv.c +++ b/drivers/gpu/drm/vc4/vc4_drv.c @@ -175,7 +175,8 @@ static struct drm_driver vc4_drm_driver = { DRIVER_GEM | DRIVER_HAVE_IRQ | DRIVER_RENDER | - DRIVER_PRIME), + DRIVER_PRIME | + DRIVER_SYNCOBJ), .lastclose = drm_fb_helper_lastclose, .open = vc4_open, .postclose = vc4_close, diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h index 22589d39083c..554a4e810d5b 100644 --- a/drivers/gpu/drm/vc4/vc4_drv.h +++ b/drivers/gpu/drm/vc4/vc4_drv.h @@ -11,6 +11,7 @@ #include <drm/drm_encoder.h> #include <drm/drm_gem_cma_helper.h> #include <drm/drm_atomic.h> +#include <drm/drm_syncobj.h> #include "uapi/drm/vc4_drm.h" diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c index 94085f8bcd68..8aa897835118 100644 --- a/drivers/gpu/drm/vc4/vc4_dsi.c +++ b/drivers/gpu/drm/vc4/vc4_dsi.c @@ -753,6 +753,11 @@ static void vc4_dsi_ulps(struct vc4_dsi *dsi, bool ulps) (dsi->lanes > 2 ? DSI1_STAT_PHY_D2_STOP : 0) | (dsi->lanes > 3 ? DSI1_STAT_PHY_D3_STOP : 0)); int ret; + bool ulps_currently_enabled = (DSI_PORT_READ(PHY_AFEC0) & + DSI_PORT_BIT(PHY_AFEC0_LATCH_ULPS)); + + if (ulps == ulps_currently_enabled) + return; DSI_PORT_WRITE(STAT, stat_ulps); DSI_PORT_WRITE(PHYC, DSI_PORT_READ(PHYC) | phyc_ulps); diff --git a/drivers/gpu/drm/vc4/vc4_gem.c b/drivers/gpu/drm/vc4/vc4_gem.c index 2107b0daf8ef..7910b9acedd6 100644 --- a/drivers/gpu/drm/vc4/vc4_gem.c +++ b/drivers/gpu/drm/vc4/vc4_gem.c @@ -27,6 +27,7 @@ #include <linux/device.h> #include <linux/io.h> #include <linux/sched/signal.h> +#include <linux/dma-fence-array.h> #include "uapi/drm/vc4_drm.h" #include "vc4_drv.h" @@ -655,7 +656,8 @@ retry: */ static int vc4_queue_submit(struct drm_device *dev, struct vc4_exec_info *exec, - struct ww_acquire_ctx *acquire_ctx) + struct ww_acquire_ctx *acquire_ctx, + struct drm_syncobj *out_sync) { struct vc4_dev *vc4 = to_vc4_dev(dev); struct vc4_exec_info *renderjob; @@ -678,6 +680,9 @@ vc4_queue_submit(struct drm_device *dev, struct vc4_exec_info *exec, fence->seqno = exec->seqno; exec->fence = &fence->base; + if (out_sync) + drm_syncobj_replace_fence(out_sync, exec->fence); + vc4_update_bo_seqnos(exec, seqno); vc4_unlock_bo_reservations(dev, exec, acquire_ctx); @@ -1113,8 +1118,10 @@ vc4_submit_cl_ioctl(struct drm_device *dev, void *data, struct vc4_dev *vc4 = to_vc4_dev(dev); struct vc4_file *vc4file = file_priv->driver_priv; struct drm_vc4_submit_cl *args = data; + struct drm_syncobj *out_sync = NULL; struct vc4_exec_info *exec; struct ww_acquire_ctx acquire_ctx; + struct dma_fence *in_fence; int ret = 0; if ((args->flags & ~(VC4_SUBMIT_CL_USE_CLEAR_COLOR | @@ -1126,7 +1133,7 @@ vc4_submit_cl_ioctl(struct drm_device *dev, void *data, } if (args->pad2 != 0) { - DRM_DEBUG("->pad2 must be set to zero\n"); + DRM_DEBUG("Invalid pad: 0x%08x\n", args->pad2); return -EINVAL; } @@ -1164,6 +1171,29 @@ vc4_submit_cl_ioctl(struct drm_device *dev, void *data, } } + if (args->in_sync) { + ret = drm_syncobj_find_fence(file_priv, args->in_sync, + &in_fence); + if (ret) + goto fail; + + /* When the fence (or fence array) is exclusively from our + * context we can skip the wait since jobs are executed in + * order of their submission through this ioctl and this can + * only have fences from a prior job. + */ + if (!dma_fence_match_context(in_fence, + vc4->dma_fence_context)) { + ret = dma_fence_wait(in_fence, true); + if (ret) { + dma_fence_put(in_fence); + goto fail; + } + } + + dma_fence_put(in_fence); + } + if (exec->args->bin_cl_size != 0) { ret = vc4_get_bcl(dev, exec); if (ret) @@ -1181,12 +1211,33 @@ vc4_submit_cl_ioctl(struct drm_device *dev, void *data, if (ret) goto fail; + if (args->out_sync) { + out_sync = drm_syncobj_find(file_priv, args->out_sync); + if (!out_sync) { + ret = -EINVAL; + goto fail; + } + + /* We replace the fence in out_sync in vc4_queue_submit since + * the render job could execute immediately after that call. + * If it finishes before our ioctl processing resumes the + * render job fence could already have been freed. + */ + } + /* Clear this out of the struct we'll be putting in the queue, * since it's part of our stack. */ exec->args = NULL; - ret = vc4_queue_submit(dev, exec, &acquire_ctx); + ret = vc4_queue_submit(dev, exec, &acquire_ctx, out_sync); + + /* The syncobj isn't part of the exec data and we need to free our + * reference even if job submission failed. + */ + if (out_sync) + drm_syncobj_put(out_sync); + if (ret) goto fail; diff --git a/drivers/gpu/drm/vc4/vc4_v3d.c b/drivers/gpu/drm/vc4/vc4_v3d.c index bfc2fa73d2ae..e47e29426078 100644 --- a/drivers/gpu/drm/vc4/vc4_v3d.c +++ b/drivers/gpu/drm/vc4/vc4_v3d.c @@ -218,8 +218,7 @@ try_again: * overall CMA pool before they make scenes complicated enough to run * out of bin space. */ -int -vc4_allocate_bin_bo(struct drm_device *drm) +static int vc4_allocate_bin_bo(struct drm_device *drm) { struct vc4_dev *vc4 = to_vc4_dev(drm); struct vc4_v3d *v3d = vc4->v3d; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 70e1a8820a7c..97f37c3c16f2 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -159,14 +159,14 @@ static const struct drm_ioctl_desc vmw_ioctls[] = { DRM_RENDER_ALLOW), VMW_IOCTL_DEF(VMW_CURSOR_BYPASS, vmw_kms_cursor_bypass_ioctl, - DRM_MASTER | DRM_CONTROL_ALLOW), + DRM_MASTER), VMW_IOCTL_DEF(VMW_CONTROL_STREAM, vmw_overlay_ioctl, - DRM_MASTER | DRM_CONTROL_ALLOW), + DRM_MASTER), VMW_IOCTL_DEF(VMW_CLAIM_STREAM, vmw_stream_claim_ioctl, - DRM_MASTER | DRM_CONTROL_ALLOW), + DRM_MASTER), VMW_IOCTL_DEF(VMW_UNREF_STREAM, vmw_stream_unref_ioctl, - DRM_MASTER | DRM_CONTROL_ALLOW), + DRM_MASTER), VMW_IOCTL_DEF(VMW_CREATE_CONTEXT, vmw_context_define_ioctl, DRM_AUTH | DRM_RENDER_ALLOW), diff --git a/drivers/gpu/drm/xen/xen_drm_front.c b/drivers/gpu/drm/xen/xen_drm_front.c index 1b0ea9ac330e..3345ac71b391 100644 --- a/drivers/gpu/drm/xen/xen_drm_front.c +++ b/drivers/gpu/drm/xen/xen_drm_front.c @@ -188,8 +188,8 @@ int xen_drm_front_dbuf_create(struct xen_drm_front_info *front_info, buf_cfg.be_alloc = front_info->cfg.be_alloc; shbuf = xen_drm_front_shbuf_alloc(&buf_cfg); - if (!shbuf) - return -ENOMEM; + if (IS_ERR(shbuf)) + return PTR_ERR(shbuf); ret = dbuf_add_to_list(front_info, shbuf, dbuf_cookie); if (ret < 0) { @@ -543,8 +543,8 @@ static int xen_drm_drv_init(struct xen_drm_front_info *front_info) front_info->drm_info = drm_info; drm_dev = drm_dev_alloc(&xen_drm_driver, dev); - if (!drm_dev) { - ret = -ENOMEM; + if (IS_ERR(drm_dev)) { + ret = PTR_ERR(drm_dev); goto fail; } @@ -778,7 +778,7 @@ static int xen_drv_remove(struct xenbus_device *dev) */ while ((xenbus_read_unsigned(front_info->xb_dev->otherend, "state", XenbusStateUnknown) != XenbusStateInitWait) && - to--) + --to) msleep(10); if (!to) { diff --git a/drivers/gpu/drm/xen/xen_drm_front_shbuf.c b/drivers/gpu/drm/xen/xen_drm_front_shbuf.c index d5705251a0d6..8099cb343ae3 100644 --- a/drivers/gpu/drm/xen/xen_drm_front_shbuf.c +++ b/drivers/gpu/drm/xen/xen_drm_front_shbuf.c @@ -383,7 +383,7 @@ xen_drm_front_shbuf_alloc(struct xen_drm_front_shbuf_cfg *cfg) buf = kzalloc(sizeof(*buf), GFP_KERNEL); if (!buf) - return NULL; + return ERR_PTR(-ENOMEM); if (cfg->be_alloc) buf->ops = &backend_ops; diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c index 111a0ab6280a..38716eb50408 100644 --- a/drivers/video/hdmi.c +++ b/drivers/video/hdmi.c @@ -93,6 +93,9 @@ ssize_t hdmi_avi_infoframe_pack(struct hdmi_avi_infoframe *frame, void *buffer, if (size < length) return -ENOSPC; + if (frame->picture_aspect > HDMI_PICTURE_ASPECT_16_9) + return -EINVAL; + memset(buffer, 0, size); ptr[0] = frame->type; diff --git a/include/drm/drm_device.h b/include/drm/drm_device.h index 3a0eac2885b7..858ba19a3e29 100644 --- a/include/drm/drm_device.h +++ b/include/drm/drm_device.h @@ -38,7 +38,6 @@ struct drm_device { struct device *dev; /**< Device structure of bus-device */ struct drm_driver *driver; /**< DRM driver managing the device */ void *dev_private; /**< DRM driver private data */ - struct drm_minor *control; /**< Control node */ struct drm_minor *primary; /**< Primary node */ struct drm_minor *render; /**< Render node */ bool registered; diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 91c9bcd4196f..c01564991a9f 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -64,6 +64,11 @@ /* AUX CH addresses */ /* DPCD */ #define DP_DPCD_REV 0x000 +# define DP_DPCD_REV_10 0x10 +# define DP_DPCD_REV_11 0x11 +# define DP_DPCD_REV_12 0x12 +# define DP_DPCD_REV_13 0x13 +# define DP_DPCD_REV_14 0x14 #define DP_MAX_LINK_RATE 0x001 @@ -119,6 +124,7 @@ # define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3) /* edp v1.2 or higher */ #define DP_TRAINING_AUX_RD_INTERVAL 0x00e /* XXX 1.2? */ +# define DP_TRAINING_AUX_RD_MASK 0x7F /* XXX 1.2? */ #define DP_ADAPTER_CAP 0x00f /* 1.2 */ # define DP_FORCE_LOAD_SENSE_CAP (1 << 0) @@ -977,18 +983,18 @@ int drm_dp_bw_code_to_link_rate(u8 link_bw); #define DP_SDP_VSC_EXT_CEA 0x21 /* DP 1.4 */ /* 0x80+ CEA-861 infoframe types */ -struct edp_sdp_header { +struct dp_sdp_header { u8 HB0; /* Secondary Data Packet ID */ u8 HB1; /* Secondary Data Packet Type */ - u8 HB2; /* 7:5 reserved, 4:0 revision number */ - u8 HB3; /* 7:5 reserved, 4:0 number of valid data bytes */ + u8 HB2; /* Secondary Data Packet Specific header, Byte 0 */ + u8 HB3; /* Secondary Data packet Specific header, Byte 1 */ } __packed; #define EDP_SDP_HEADER_REVISION_MASK 0x1F #define EDP_SDP_HEADER_VALID_PAYLOAD_BYTES 0x1F struct edp_vsc_psr { - struct edp_sdp_header sdp_header; + struct dp_sdp_header sdp_header; u8 DB0; /* Stereo Interface */ u8 DB1; /* 0 - PSR State; 1 - Update RFB; 2 - CRC Valid */ u8 DB2; /* CRC value bits 7:0 of the R or Cr component */ diff --git a/include/drm/drm_file.h b/include/drm/drm_file.h index 5176c3797680..027ac16da3d1 100644 --- a/include/drm/drm_file.h +++ b/include/drm/drm_file.h @@ -47,6 +47,9 @@ struct device; * header include loops we need it here for now. */ +/* Note that the order of this enum is ABI (it determines + * /dev/dri/renderD* numbers). + */ enum drm_minor_type { DRM_MINOR_PRIMARY, DRM_MINOR_CONTROL, @@ -182,6 +185,14 @@ struct drm_file { unsigned atomic:1; /** + * @aspect_ratio_allowed: + * + * True, if client can handle picture aspect ratios, and has requested + * to pass this information along with the mode. + */ + unsigned aspect_ratio_allowed:1; + + /** * @is_master: * * This client is the creator of @master. Protected by struct @@ -348,18 +359,6 @@ static inline bool drm_is_render_client(const struct drm_file *file_priv) return file_priv->minor->type == DRM_MINOR_RENDER; } -/** - * drm_is_control_client - is this an open file of the control node - * @file_priv: DRM file - * - * Control nodes are deprecated and in the process of getting removed from the - * DRM userspace API. Do not ever use! - */ -static inline bool drm_is_control_client(const struct drm_file *file_priv) -{ - return file_priv->minor->type == DRM_MINOR_CONTROL; -} - int drm_open(struct inode *inode, struct file *filp); ssize_t drm_read(struct file *filp, char __user *buffer, size_t count, loff_t *offset); diff --git a/include/drm/drm_ioctl.h b/include/drm/drm_ioctl.h index add42809642a..fafb6f592c4b 100644 --- a/include/drm/drm_ioctl.h +++ b/include/drm/drm_ioctl.h @@ -109,13 +109,6 @@ enum drm_ioctl_flags { */ DRM_ROOT_ONLY = BIT(2), /** - * @DRM_CONTROL_ALLOW: - * - * Deprecated, do not use. Control nodes are in the process of getting - * removed. - */ - DRM_CONTROL_ALLOW = BIT(3), - /** * @DRM_UNLOCKED: * * Whether &drm_ioctl_desc.func should be called with the DRM BKL held diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h index 0d310beae6af..b159fe07fcf9 100644 --- a/include/drm/drm_modes.h +++ b/include/drm/drm_modes.h @@ -147,6 +147,12 @@ enum drm_mode_status { #define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF +#define DRM_MODE_MATCH_TIMINGS (1 << 0) +#define DRM_MODE_MATCH_CLOCK (1 << 1) +#define DRM_MODE_MATCH_FLAGS (1 << 2) +#define DRM_MODE_MATCH_3D_FLAGS (1 << 3) +#define DRM_MODE_MATCH_ASPECT_RATIO (1 << 4) + /** * struct drm_display_mode - DRM kernel-internal display mode structure * @hdisplay: horizontal display size @@ -405,6 +411,19 @@ struct drm_display_mode { * Field for setting the HDMI picture aspect ratio of a mode. */ enum hdmi_picture_aspect picture_aspect_ratio; + + /** + * @export_head: + * + * struct list_head for modes to be exposed to the userspace. + * This is to maintain a list of exposed modes while preparing + * user-mode's list in drm_mode_getconnector ioctl. The purpose of this + * list_head only lies in the ioctl function, and is not expected to be + * used outside the function. + * Once used, the stale pointers are not reset, but left as it is, to + * avoid overhead of protecting it by mode_config.mutex. + */ + struct list_head export_head; }; /** @@ -490,6 +509,9 @@ void drm_mode_copy(struct drm_display_mode *dst, const struct drm_display_mode *src); struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev, const struct drm_display_mode *mode); +bool drm_mode_match(const struct drm_display_mode *mode1, + const struct drm_display_mode *mode2, + unsigned int match_flags); bool drm_mode_equal(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2); bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1, diff --git a/include/drm/drm_property.h b/include/drm/drm_property.h index ab8167baade5..1d5c0b2a8956 100644 --- a/include/drm/drm_property.h +++ b/include/drm/drm_property.h @@ -260,7 +260,7 @@ struct drm_property *drm_property_create_object(struct drm_device *dev, uint32_t type); struct drm_property *drm_property_create_bool(struct drm_device *dev, u32 flags, const char *name); -int drm_property_add_enum(struct drm_property *property, int index, +int drm_property_add_enum(struct drm_property *property, uint64_t value, const char *name); void drm_property_destroy(struct drm_device *dev, struct drm_property *property); diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h index 44bc122b9ee0..6c54544a4be7 100644 --- a/include/drm/drm_rect.h +++ b/include/drm/drm_rect.h @@ -175,8 +175,7 @@ static inline bool drm_rect_equals(const struct drm_rect *r1, bool drm_rect_intersect(struct drm_rect *r, const struct drm_rect *clip); bool drm_rect_clip_scaled(struct drm_rect *src, struct drm_rect *dst, - const struct drm_rect *clip, - int hscale, int vscale); + const struct drm_rect *clip); int drm_rect_calc_hscale(const struct drm_rect *src, const struct drm_rect *dst, int min_hscale, int max_hscale); diff --git a/include/linux/dma-fence.h b/include/linux/dma-fence.h index 4c008170fe65..eb9b05aa5aea 100644 --- a/include/linux/dma-fence.h +++ b/include/linux/dma-fence.h @@ -94,11 +94,11 @@ typedef void (*dma_fence_func_t)(struct dma_fence *fence, struct dma_fence_cb *cb); /** - * struct dma_fence_cb - callback for dma_fence_add_callback - * @node: used by dma_fence_add_callback to append this struct to fence::cb_list + * struct dma_fence_cb - callback for dma_fence_add_callback() + * @node: used by dma_fence_add_callback() to append this struct to fence::cb_list * @func: dma_fence_func_t to call * - * This struct will be initialized by dma_fence_add_callback, additional + * This struct will be initialized by dma_fence_add_callback(), additional * data can be passed along by embedding dma_fence_cb in another struct. */ struct dma_fence_cb { @@ -108,75 +108,143 @@ struct dma_fence_cb { /** * struct dma_fence_ops - operations implemented for fence - * @get_driver_name: returns the driver name. - * @get_timeline_name: return the name of the context this fence belongs to. - * @enable_signaling: enable software signaling of fence. - * @signaled: [optional] peek whether the fence is signaled, can be null. - * @wait: custom wait implementation, or dma_fence_default_wait. - * @release: [optional] called on destruction of fence, can be null - * @fill_driver_data: [optional] callback to fill in free-form debug info - * Returns amount of bytes filled, or -errno. - * @fence_value_str: [optional] fills in the value of the fence as a string - * @timeline_value_str: [optional] fills in the current value of the timeline - * as a string * - * Notes on enable_signaling: - * For fence implementations that have the capability for hw->hw - * signaling, they can implement this op to enable the necessary - * irqs, or insert commands into cmdstream, etc. This is called - * in the first wait() or add_callback() path to let the fence - * implementation know that there is another driver waiting on - * the signal (ie. hw->sw case). - * - * This function can be called from atomic context, but not - * from irq context, so normal spinlocks can be used. - * - * A return value of false indicates the fence already passed, - * or some failure occurred that made it impossible to enable - * signaling. True indicates successful enabling. - * - * fence->error may be set in enable_signaling, but only when false is - * returned. - * - * Calling dma_fence_signal before enable_signaling is called allows - * for a tiny race window in which enable_signaling is called during, - * before, or after dma_fence_signal. To fight this, it is recommended - * that before enable_signaling returns true an extra reference is - * taken on the fence, to be released when the fence is signaled. - * This will mean dma_fence_signal will still be called twice, but - * the second time will be a noop since it was already signaled. - * - * Notes on signaled: - * May set fence->error if returning true. - * - * Notes on wait: - * Must not be NULL, set to dma_fence_default_wait for default implementation. - * the dma_fence_default_wait implementation should work for any fence, as long - * as enable_signaling works correctly. - * - * Must return -ERESTARTSYS if the wait is intr = true and the wait was - * interrupted, and remaining jiffies if fence has signaled, or 0 if wait - * timed out. Can also return other error values on custom implementations, - * which should be treated as if the fence is signaled. For example a hardware - * lockup could be reported like that. - * - * Notes on release: - * Can be NULL, this function allows additional commands to run on - * destruction of the fence. Can be called from irq context. - * If pointer is set to NULL, kfree will get called instead. */ - struct dma_fence_ops { + /** + * @get_driver_name: + * + * Returns the driver name. This is a callback to allow drivers to + * compute the name at runtime, without having it to store permanently + * for each fence, or build a cache of some sort. + * + * This callback is mandatory. + */ const char * (*get_driver_name)(struct dma_fence *fence); + + /** + * @get_timeline_name: + * + * Return the name of the context this fence belongs to. This is a + * callback to allow drivers to compute the name at runtime, without + * having it to store permanently for each fence, or build a cache of + * some sort. + * + * This callback is mandatory. + */ const char * (*get_timeline_name)(struct dma_fence *fence); + + /** + * @enable_signaling: + * + * Enable software signaling of fence. + * + * For fence implementations that have the capability for hw->hw + * signaling, they can implement this op to enable the necessary + * interrupts, or insert commands into cmdstream, etc, to avoid these + * costly operations for the common case where only hw->hw + * synchronization is required. This is called in the first + * dma_fence_wait() or dma_fence_add_callback() path to let the fence + * implementation know that there is another driver waiting on the + * signal (ie. hw->sw case). + * + * This function can be called from atomic context, but not + * from irq context, so normal spinlocks can be used. + * + * A return value of false indicates the fence already passed, + * or some failure occurred that made it impossible to enable + * signaling. True indicates successful enabling. + * + * &dma_fence.error may be set in enable_signaling, but only when false + * is returned. + * + * Since many implementations can call dma_fence_signal() even when before + * @enable_signaling has been called there's a race window, where the + * dma_fence_signal() might result in the final fence reference being + * released and its memory freed. To avoid this, implementations of this + * callback should grab their own reference using dma_fence_get(), to be + * released when the fence is signalled (through e.g. the interrupt + * handler). + * + * This callback is mandatory. + */ bool (*enable_signaling)(struct dma_fence *fence); + + /** + * @signaled: + * + * Peek whether the fence is signaled, as a fastpath optimization for + * e.g. dma_fence_wait() or dma_fence_add_callback(). Note that this + * callback does not need to make any guarantees beyond that a fence + * once indicates as signalled must always return true from this + * callback. This callback may return false even if the fence has + * completed already, in this case information hasn't propogated throug + * the system yet. See also dma_fence_is_signaled(). + * + * May set &dma_fence.error if returning true. + * + * This callback is optional. + */ bool (*signaled)(struct dma_fence *fence); + + /** + * @wait: + * + * Custom wait implementation, or dma_fence_default_wait. + * + * Must not be NULL, set to dma_fence_default_wait for default implementation. + * the dma_fence_default_wait implementation should work for any fence, as long + * as enable_signaling works correctly. + * + * Must return -ERESTARTSYS if the wait is intr = true and the wait was + * interrupted, and remaining jiffies if fence has signaled, or 0 if wait + * timed out. Can also return other error values on custom implementations, + * which should be treated as if the fence is signaled. For example a hardware + * lockup could be reported like that. + * + * This callback is mandatory. + */ signed long (*wait)(struct dma_fence *fence, bool intr, signed long timeout); + + /** + * @release: + * + * Called on destruction of fence to release additional resources. + * Can be called from irq context. This callback is optional. If it is + * NULL, then dma_fence_free() is instead called as the default + * implementation. + */ void (*release)(struct dma_fence *fence); + /** + * @fill_driver_data: + * + * Callback to fill in free-form debug info. + * + * Returns amount of bytes filled, or negative error on failure. + * + * This callback is optional. + */ int (*fill_driver_data)(struct dma_fence *fence, void *data, int size); + + /** + * @fence_value_str: + * + * Callback to fill in free-form debug info specific to this fence, like + * the sequence number. + * + * This callback is optional. + */ void (*fence_value_str)(struct dma_fence *fence, char *str, int size); + + /** + * @timeline_value_str: + * + * Fills in the current value of the timeline as a string, like the + * sequence number. This should match what @fill_driver_data prints for + * the most recently signalled fence (assuming no delayed signalling). + */ void (*timeline_value_str)(struct dma_fence *fence, char *str, int size); }; @@ -189,7 +257,7 @@ void dma_fence_free(struct dma_fence *fence); /** * dma_fence_put - decreases refcount of the fence - * @fence: [in] fence to reduce refcount of + * @fence: fence to reduce refcount of */ static inline void dma_fence_put(struct dma_fence *fence) { @@ -199,7 +267,7 @@ static inline void dma_fence_put(struct dma_fence *fence) /** * dma_fence_get - increases refcount of the fence - * @fence: [in] fence to increase refcount of + * @fence: fence to increase refcount of * * Returns the same fence, with refcount increased by 1. */ @@ -213,7 +281,7 @@ static inline struct dma_fence *dma_fence_get(struct dma_fence *fence) /** * dma_fence_get_rcu - get a fence from a reservation_object_list with * rcu read lock - * @fence: [in] fence to increase refcount of + * @fence: fence to increase refcount of * * Function returns NULL if no refcount could be obtained, or the fence. */ @@ -227,7 +295,7 @@ static inline struct dma_fence *dma_fence_get_rcu(struct dma_fence *fence) /** * dma_fence_get_rcu_safe - acquire a reference to an RCU tracked fence - * @fencep: [in] pointer to fence to increase refcount of + * @fencep: pointer to fence to increase refcount of * * Function returns NULL if no refcount could be obtained, or the fence. * This function handles acquiring a reference to a fence that may be @@ -289,14 +357,16 @@ void dma_fence_enable_sw_signaling(struct dma_fence *fence); /** * dma_fence_is_signaled_locked - Return an indication if the fence * is signaled yet. - * @fence: [in] the fence to check + * @fence: the fence to check * * Returns true if the fence was already signaled, false if not. Since this * function doesn't enable signaling, it is not guaranteed to ever return - * true if dma_fence_add_callback, dma_fence_wait or - * dma_fence_enable_sw_signaling haven't been called before. + * true if dma_fence_add_callback(), dma_fence_wait() or + * dma_fence_enable_sw_signaling() haven't been called before. * - * This function requires fence->lock to be held. + * This function requires &dma_fence.lock to be held. + * + * See also dma_fence_is_signaled(). */ static inline bool dma_fence_is_signaled_locked(struct dma_fence *fence) @@ -314,17 +384,19 @@ dma_fence_is_signaled_locked(struct dma_fence *fence) /** * dma_fence_is_signaled - Return an indication if the fence is signaled yet. - * @fence: [in] the fence to check + * @fence: the fence to check * * Returns true if the fence was already signaled, false if not. Since this * function doesn't enable signaling, it is not guaranteed to ever return - * true if dma_fence_add_callback, dma_fence_wait or - * dma_fence_enable_sw_signaling haven't been called before. + * true if dma_fence_add_callback(), dma_fence_wait() or + * dma_fence_enable_sw_signaling() haven't been called before. * * It's recommended for seqno fences to call dma_fence_signal when the * operation is complete, it makes it possible to prevent issues from * wraparound between time of issue and time of use by checking the return * value of this function before calling hardware-specific wait instructions. + * + * See also dma_fence_is_signaled_locked(). */ static inline bool dma_fence_is_signaled(struct dma_fence *fence) @@ -342,8 +414,8 @@ dma_fence_is_signaled(struct dma_fence *fence) /** * __dma_fence_is_later - return if f1 is chronologically later than f2 - * @f1: [in] the first fence's seqno - * @f2: [in] the second fence's seqno from the same context + * @f1: the first fence's seqno + * @f2: the second fence's seqno from the same context * * Returns true if f1 is chronologically later than f2. Both fences must be * from the same context, since a seqno is not common across contexts. @@ -355,8 +427,8 @@ static inline bool __dma_fence_is_later(u32 f1, u32 f2) /** * dma_fence_is_later - return if f1 is chronologically later than f2 - * @f1: [in] the first fence from the same context - * @f2: [in] the second fence from the same context + * @f1: the first fence from the same context + * @f2: the second fence from the same context * * Returns true if f1 is chronologically later than f2. Both fences must be * from the same context, since a seqno is not re-used across contexts. @@ -372,8 +444,8 @@ static inline bool dma_fence_is_later(struct dma_fence *f1, /** * dma_fence_later - return the chronologically later fence - * @f1: [in] the first fence from the same context - * @f2: [in] the second fence from the same context + * @f1: the first fence from the same context + * @f2: the second fence from the same context * * Returns NULL if both fences are signaled, otherwise the fence that would be * signaled last. Both fences must be from the same context, since a seqno is @@ -398,7 +470,7 @@ static inline struct dma_fence *dma_fence_later(struct dma_fence *f1, /** * dma_fence_get_status_locked - returns the status upon completion - * @fence: [in] the dma_fence to query + * @fence: the dma_fence to query * * Drivers can supply an optional error status condition before they signal * the fence (to indicate whether the fence was completed due to an error @@ -422,8 +494,8 @@ int dma_fence_get_status(struct dma_fence *fence); /** * dma_fence_set_error - flag an error condition on the fence - * @fence: [in] the dma_fence - * @error: [in] the error to store + * @fence: the dma_fence + * @error: the error to store * * Drivers can supply an optional error status condition before they signal * the fence, to indicate that the fence was completed due to an error @@ -449,8 +521,8 @@ signed long dma_fence_wait_any_timeout(struct dma_fence **fences, /** * dma_fence_wait - sleep until the fence gets signaled - * @fence: [in] the fence to wait on - * @intr: [in] if true, do an interruptible wait + * @fence: the fence to wait on + * @intr: if true, do an interruptible wait * * This function will return -ERESTARTSYS if interrupted by a signal, * or 0 if the fence was signaled. Other error values may be @@ -459,6 +531,8 @@ signed long dma_fence_wait_any_timeout(struct dma_fence **fences, * Performs a synchronous wait on this fence. It is assumed the caller * directly or indirectly holds a reference to the fence, otherwise the * fence might be freed before return, resulting in undefined behavior. + * + * See also dma_fence_wait_timeout() and dma_fence_wait_any_timeout(). */ static inline signed long dma_fence_wait(struct dma_fence *fence, bool intr) { diff --git a/include/uapi/drm/drm.h b/include/uapi/drm/drm.h index 6fdff5945c8a..9c660e1688ab 100644 --- a/include/uapi/drm/drm.h +++ b/include/uapi/drm/drm.h @@ -680,6 +680,13 @@ struct drm_get_cap { */ #define DRM_CLIENT_CAP_ATOMIC 3 +/** + * DRM_CLIENT_CAP_ASPECT_RATIO + * + * If set to 1, the DRM core will provide aspect ratio information in modes. + */ +#define DRM_CLIENT_CAP_ASPECT_RATIO 4 + /** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */ struct drm_set_client_cap { __u64 capability; diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h index 50bcf4214ff9..4b3a1bb58e68 100644 --- a/include/uapi/drm/drm_mode.h +++ b/include/uapi/drm/drm_mode.h @@ -93,6 +93,8 @@ extern "C" { #define DRM_MODE_PICTURE_ASPECT_NONE 0 #define DRM_MODE_PICTURE_ASPECT_4_3 1 #define DRM_MODE_PICTURE_ASPECT_16_9 2 +#define DRM_MODE_PICTURE_ASPECT_64_27 3 +#define DRM_MODE_PICTURE_ASPECT_256_135 4 /* Aspect ratio flag bitmask (4 bits 22:19) */ #define DRM_MODE_FLAG_PIC_AR_MASK (0x0F<<19) @@ -102,6 +104,10 @@ extern "C" { (DRM_MODE_PICTURE_ASPECT_4_3<<19) #define DRM_MODE_FLAG_PIC_AR_16_9 \ (DRM_MODE_PICTURE_ASPECT_16_9<<19) +#define DRM_MODE_FLAG_PIC_AR_64_27 \ + (DRM_MODE_PICTURE_ASPECT_64_27<<19) +#define DRM_MODE_FLAG_PIC_AR_256_135 \ + (DRM_MODE_PICTURE_ASPECT_256_135<<19) #define DRM_MODE_FLAG_ALL (DRM_MODE_FLAG_PHSYNC | \ DRM_MODE_FLAG_NHSYNC | \ diff --git a/include/uapi/drm/v3d_drm.h b/include/uapi/drm/v3d_drm.h new file mode 100644 index 000000000000..7b6627783608 --- /dev/null +++ b/include/uapi/drm/v3d_drm.h @@ -0,0 +1,194 @@ +/* + * Copyright © 2014-2018 Broadcom + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ + +#ifndef _V3D_DRM_H_ +#define _V3D_DRM_H_ + +#include "drm.h" + +#if defined(__cplusplus) +extern "C" { +#endif + +#define DRM_V3D_SUBMIT_CL 0x00 +#define DRM_V3D_WAIT_BO 0x01 +#define DRM_V3D_CREATE_BO 0x02 +#define DRM_V3D_MMAP_BO 0x03 +#define DRM_V3D_GET_PARAM 0x04 +#define DRM_V3D_GET_BO_OFFSET 0x05 + +#define DRM_IOCTL_V3D_SUBMIT_CL DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_CL, struct drm_v3d_submit_cl) +#define DRM_IOCTL_V3D_WAIT_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_WAIT_BO, struct drm_v3d_wait_bo) +#define DRM_IOCTL_V3D_CREATE_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_CREATE_BO, struct drm_v3d_create_bo) +#define DRM_IOCTL_V3D_MMAP_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_MMAP_BO, struct drm_v3d_mmap_bo) +#define DRM_IOCTL_V3D_GET_PARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_GET_PARAM, struct drm_v3d_get_param) +#define DRM_IOCTL_V3D_GET_BO_OFFSET DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_GET_BO_OFFSET, struct drm_v3d_get_bo_offset) + +/** + * struct drm_v3d_submit_cl - ioctl argument for submitting commands to the 3D + * engine. + * + * This asks the kernel to have the GPU execute an optional binner + * command list, and a render command list. + */ +struct drm_v3d_submit_cl { + /* Pointer to the binner command list. + * + * This is the first set of commands executed, which runs the + * coordinate shader to determine where primitives land on the screen, + * then writes out the state updates and draw calls necessary per tile + * to the tile allocation BO. + */ + __u32 bcl_start; + + /** End address of the BCL (first byte after the BCL) */ + __u32 bcl_end; + + /* Offset of the render command list. + * + * This is the second set of commands executed, which will either + * execute the tiles that have been set up by the BCL, or a fixed set + * of tiles (in the case of RCL-only blits). + */ + __u32 rcl_start; + + /** End address of the RCL (first byte after the RCL) */ + __u32 rcl_end; + + /** An optional sync object to wait on before starting the BCL. */ + __u32 in_sync_bcl; + /** An optional sync object to wait on before starting the RCL. */ + __u32 in_sync_rcl; + /** An optional sync object to place the completion fence in. */ + __u32 out_sync; + + /* Offset of the tile alloc memory + * + * This is optional on V3D 3.3 (where the CL can set the value) but + * required on V3D 4.1. + */ + __u32 qma; + + /** Size of the tile alloc memory. */ + __u32 qms; + + /** Offset of the tile state data array. */ + __u32 qts; + + /* Pointer to a u32 array of the BOs that are referenced by the job. + */ + __u64 bo_handles; + + /* Number of BO handles passed in (size is that times 4). */ + __u32 bo_handle_count; + + /* Pad, must be zero-filled. */ + __u32 pad; +}; + +/** + * struct drm_v3d_wait_bo - ioctl argument for waiting for + * completion of the last DRM_V3D_SUBMIT_CL on a BO. + * + * This is useful for cases where multiple processes might be + * rendering to a BO and you want to wait for all rendering to be + * completed. + */ +struct drm_v3d_wait_bo { + __u32 handle; + __u32 pad; + __u64 timeout_ns; +}; + +/** + * struct drm_v3d_create_bo - ioctl argument for creating V3D BOs. + * + * There are currently no values for the flags argument, but it may be + * used in a future extension. + */ +struct drm_v3d_create_bo { + __u32 size; + __u32 flags; + /** Returned GEM handle for the BO. */ + __u32 handle; + /** + * Returned offset for the BO in the V3D address space. This offset + * is private to the DRM fd and is valid for the lifetime of the GEM + * handle. + * + * This offset value will always be nonzero, since various HW + * units treat 0 specially. + */ + __u32 offset; +}; + +/** + * struct drm_v3d_mmap_bo - ioctl argument for mapping V3D BOs. + * + * This doesn't actually perform an mmap. Instead, it returns the + * offset you need to use in an mmap on the DRM device node. This + * means that tools like valgrind end up knowing about the mapped + * memory. + * + * There are currently no values for the flags argument, but it may be + * used in a future extension. + */ +struct drm_v3d_mmap_bo { + /** Handle for the object being mapped. */ + __u32 handle; + __u32 flags; + /** offset into the drm node to use for subsequent mmap call. */ + __u64 offset; +}; + +enum drm_v3d_param { + DRM_V3D_PARAM_V3D_UIFCFG, + DRM_V3D_PARAM_V3D_HUB_IDENT1, + DRM_V3D_PARAM_V3D_HUB_IDENT2, + DRM_V3D_PARAM_V3D_HUB_IDENT3, + DRM_V3D_PARAM_V3D_CORE0_IDENT0, + DRM_V3D_PARAM_V3D_CORE0_IDENT1, + DRM_V3D_PARAM_V3D_CORE0_IDENT2, +}; + +struct drm_v3d_get_param { + __u32 param; + __u32 pad; + __u64 value; +}; + +/** + * Returns the offset for the BO in the V3D address space for this DRM fd. + * This is the same value returned by drm_v3d_create_bo, if that was called + * from this DRM fd. + */ +struct drm_v3d_get_bo_offset { + __u32 handle; + __u32 offset; +}; + +#if defined(__cplusplus) +} +#endif + +#endif /* _V3D_DRM_H_ */ diff --git a/include/uapi/drm/vc4_drm.h b/include/uapi/drm/vc4_drm.h index b95a0e11cb07..2cac6277a1d7 100644 --- a/include/uapi/drm/vc4_drm.h +++ b/include/uapi/drm/vc4_drm.h @@ -183,10 +183,17 @@ struct drm_vc4_submit_cl { /* ID of the perfmon to attach to this job. 0 means no perfmon. */ __u32 perfmonid; - /* Unused field to align this struct on 64 bits. Must be set to 0. - * If one ever needs to add an u32 field to this struct, this field - * can be used. + /* Syncobj handle to wait on. If set, processing of this render job + * will not start until the syncobj is signaled. 0 means ignore. */ + __u32 in_sync; + + /* Syncobj handle to export fence to. If set, the fence in the syncobj + * will be replaced with a fence that signals upon completion of this + * render job. 0 means ignore. + */ + __u32 out_sync; + __u32 pad2; }; diff --git a/include/uapi/linux/virtio_gpu.h b/include/uapi/linux/virtio_gpu.h index 4b04ead26cd9..f43c3c6171ff 100644 --- a/include/uapi/linux/virtio_gpu.h +++ b/include/uapi/linux/virtio_gpu.h @@ -260,6 +260,7 @@ struct virtio_gpu_cmd_submit { }; #define VIRTIO_GPU_CAPSET_VIRGL 1 +#define VIRTIO_GPU_CAPSET_VIRGL2 2 /* VIRTIO_GPU_CMD_GET_CAPSET_INFO */ struct virtio_gpu_get_capset_info { |