diff options
| -rw-r--r-- | drivers/nvme/host/pci.c | 13 |
1 files changed, 10 insertions, 3 deletions
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index db160cee42ad..108e109e99f1 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2846,7 +2846,7 @@ static int nvme_resume(struct device *dev) struct nvme_dev *ndev = pci_get_drvdata(to_pci_dev(dev)); struct nvme_ctrl *ctrl = &ndev->ctrl; - if (pm_resume_via_firmware() || !ctrl->npss || + if (ndev->last_ps == U32_MAX || nvme_set_power_state(ctrl, ndev->last_ps) != 0) nvme_reset_ctrl(ctrl); return 0; @@ -2859,6 +2859,8 @@ static int nvme_suspend(struct device *dev) struct nvme_ctrl *ctrl = &ndev->ctrl; int ret = -EBUSY; + ndev->last_ps = U32_MAX; + /* * The platform does not remove power for a kernel managed suspend so * use host managed nvme power settings for lowest idle power if @@ -2866,8 +2868,14 @@ static int nvme_suspend(struct device *dev) * shutdown. But if the firmware is involved after the suspend or the * device does not support any non-default power states, shut down the * device fully. + * + * If ASPM is not enabled for the device, shut down the device and allow + * the PCI bus layer to put it into D3 in order to take the PCIe link + * down, so as to allow the platform to achieve its minimum low-power + * state (which may not be possible if the link is up). */ - if (pm_suspend_via_firmware() || !ctrl->npss) { + if (pm_suspend_via_firmware() || !ctrl->npss || + !pcie_aspm_enabled(pdev)) { nvme_dev_disable(ndev, true); return 0; } @@ -2880,7 +2888,6 @@ static int nvme_suspend(struct device *dev) ctrl->state != NVME_CTRL_ADMIN_ONLY) goto unfreeze; - ndev->last_ps = 0; ret = nvme_get_power_state(ctrl, &ndev->last_ps); if (ret < 0) goto unfreeze; |