summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/tty/Kconfig13
-rw-r--r--drivers/tty/Makefile1
-rw-r--r--drivers/tty/metag_da.c665
3 files changed, 0 insertions, 679 deletions
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index b811442c5ce6..75a71ebcb369 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -402,19 +402,6 @@ config GOLDFISH_TTY_EARLY_CONSOLE
default y if GOLDFISH_TTY=y
select SERIAL_EARLYCON
-config DA_TTY
- bool "DA TTY"
- depends on METAG_DA
- select SERIAL_NONSTANDARD
- help
- This enables a TTY on a Dash channel.
-
-config DA_CONSOLE
- bool "DA Console"
- depends on DA_TTY
- help
- This enables a console on a Dash channel.
-
config MIPS_EJTAG_FDC_TTY
bool "MIPS EJTAG Fast Debug Channel TTY"
depends on MIPS_CDMM
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index 8ce3a8661b31..47c71f43a397 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -32,7 +32,6 @@ obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o
obj-$(CONFIG_SYNCLINK) += synclink.o
obj-$(CONFIG_PPC_EPAPR_HV_BYTECHAN) += ehv_bytechan.o
obj-$(CONFIG_GOLDFISH_TTY) += goldfish.o
-obj-$(CONFIG_DA_TTY) += metag_da.o
obj-$(CONFIG_MIPS_EJTAG_FDC_TTY) += mips_ejtag_fdc.o
obj-$(CONFIG_VCC) += vcc.o
diff --git a/drivers/tty/metag_da.c b/drivers/tty/metag_da.c
deleted file mode 100644
index 99eaed4b2dbc..000000000000
--- a/drivers/tty/metag_da.c
+++ /dev/null
@@ -1,665 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * dashtty.c - tty driver for Dash channels interface.
- *
- * Copyright (C) 2007,2008,2012 Imagination Technologies
- */
-
-#include <linux/atomic.h>
-#include <linux/completion.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/kthread.h>
-#include <linux/moduleparam.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/serial.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/uaccess.h>
-
-#include <asm/da.h>
-
-/* Channel error codes */
-#define CONAOK 0
-#define CONERR 1
-#define CONBAD 2
-#define CONPRM 3
-#define CONADR 4
-#define CONCNT 5
-#define CONCBF 6
-#define CONCBE 7
-#define CONBSY 8
-
-/* Default channel for the console */
-#define CONSOLE_CHANNEL 1
-
-#define NUM_TTY_CHANNELS 6
-
-/* Auto allocate */
-#define DA_TTY_MAJOR 0
-
-/* A speedy poll rate helps the userland debug process connection response.
- * But, if you set it too high then no other userland processes get much
- * of a look in.
- */
-#define DA_TTY_POLL (HZ / 50)
-
-/*
- * A short put delay improves latency but has a high throughput overhead
- */
-#define DA_TTY_PUT_DELAY (HZ / 100)
-
-static atomic_t num_channels_need_poll = ATOMIC_INIT(0);
-
-static struct timer_list poll_timer;
-
-static struct tty_driver *channel_driver;
-
-static struct timer_list put_timer;
-static struct task_struct *dashtty_thread;
-
-/*
- * The console_poll parameter determines whether the console channel should be
- * polled for input.
- * By default the console channel isn't polled at all, in order to avoid the
- * overhead, but that means it isn't possible to have a login on /dev/console.
- */
-static bool console_poll;
-module_param(console_poll, bool, S_IRUGO);
-
-#define RX_BUF_SIZE 1024
-
-enum {
- INCHR = 1,
- OUTCHR,
- RDBUF,
- WRBUF,
- RDSTAT
-};
-
-/**
- * struct dashtty_port - Wrapper struct for dashtty tty_port.
- * @port: TTY port data
- * @rx_lock: Lock for rx_buf.
- * This protects between the poll timer and user context.
- * It's also held during read SWITCH operations.
- * @rx_buf: Read buffer
- * @xmit_lock: Lock for xmit_*, and port.xmit_buf.
- * This protects between user context and kernel thread.
- * It's also held during write SWITCH operations.
- * @xmit_cnt: Size of xmit buffer contents
- * @xmit_head: Head of xmit buffer where data is written
- * @xmit_tail: Tail of xmit buffer where data is read
- * @xmit_empty: Completion for xmit buffer being empty
- */
-struct dashtty_port {
- struct tty_port port;
- spinlock_t rx_lock;
- void *rx_buf;
- struct mutex xmit_lock;
- unsigned int xmit_cnt;
- unsigned int xmit_head;
- unsigned int xmit_tail;
- struct completion xmit_empty;
-};
-
-static struct dashtty_port dashtty_ports[NUM_TTY_CHANNELS];
-
-static atomic_t dashtty_xmit_cnt = ATOMIC_INIT(0);
-static wait_queue_head_t dashtty_waitqueue;
-
-/*
- * Low-level DA channel access routines
- */
-static int chancall(int in_bios_function, int in_channel,
- int in_arg2, void *in_arg3,
- void *in_arg4)
-{
- register int bios_function asm("D1Ar1") = in_bios_function;
- register int channel asm("D0Ar2") = in_channel;
- register int arg2 asm("D1Ar3") = in_arg2;
- register void *arg3 asm("D0Ar4") = in_arg3;
- register void *arg4 asm("D1Ar5") = in_arg4;
- register int bios_call asm("D0Ar6") = 3;
- register int result asm("D0Re0");
-
- asm volatile (
- "MSETL [A0StP++], %6,%4,%2\n\t"
- "ADD A0StP, A0StP, #8\n\t"
- "SWITCH #0x0C30208\n\t"
- "GETD %0, [A0StP+#-8]\n\t"
- "SUB A0StP, A0StP, #(4*6)+8\n\t"
- : "=d" (result) /* outs */
- : "d" (bios_function),
- "d" (channel),
- "d" (arg2),
- "d" (arg3),
- "d" (arg4),
- "d" (bios_call) /* ins */
- : "memory");
-
- return result;
-}
-
-/*
- * Attempts to fetch count bytes from channel and returns actual count.
- */
-static int fetch_data(unsigned int channel)
-{
- struct dashtty_port *dport = &dashtty_ports[channel];
- int received = 0;
-
- spin_lock_bh(&dport->rx_lock);
- /* check the port isn't being shut down */
- if (!dport->rx_buf)
- goto unlock;
- if (chancall(RDBUF, channel, RX_BUF_SIZE,
- (void *)dport->rx_buf, &received) == CONAOK) {
- if (received) {
- int space;
- unsigned char *cbuf;
-
- space = tty_prepare_flip_string(&dport->port, &cbuf,
- received);
-
- if (space <= 0)
- goto unlock;
-
- memcpy(cbuf, dport->rx_buf, space);
- tty_flip_buffer_push(&dport->port);
- }
- }
-unlock:
- spin_unlock_bh(&dport->rx_lock);
-
- return received;
-}
-
-/**
- * find_channel_to_poll() - Returns number of the next channel to poll.
- * Returns: The number of the next channel to poll, or -1 if none need
- * polling.
- */
-static int find_channel_to_poll(void)
-{
- static int last_polled_channel;
- int last = last_polled_channel;
- int chan;
- struct dashtty_port *dport;
-
- for (chan = last + 1; ; ++chan) {
- if (chan >= NUM_TTY_CHANNELS)
- chan = 0;
-
- dport = &dashtty_ports[chan];
- if (dport->rx_buf) {
- last_polled_channel = chan;
- return chan;
- }
-
- if (chan == last)
- break;
- }
- return -1;
-}
-
-/**
- * put_channel_data() - Write out a block of channel data.
- * @chan: DA channel number.
- *
- * Write a single block of data out to the debug adapter. If the circular buffer
- * is wrapped then only the first block is written.
- *
- * Returns: 1 if the remote buffer was too full to accept data.
- * 0 otherwise.
- */
-static int put_channel_data(unsigned int chan)
-{
- struct dashtty_port *dport;
- struct tty_struct *tty;
- int number_written;
- unsigned int count = 0;
-
- dport = &dashtty_ports[chan];
- mutex_lock(&dport->xmit_lock);
- if (dport->xmit_cnt) {
- count = min((unsigned int)(SERIAL_XMIT_SIZE - dport->xmit_tail),
- dport->xmit_cnt);
- chancall(WRBUF, chan, count,
- dport->port.xmit_buf + dport->xmit_tail,
- &number_written);
- dport->xmit_cnt -= number_written;
- if (!dport->xmit_cnt) {
- /* reset pointers to avoid wraps */
- dport->xmit_head = 0;
- dport->xmit_tail = 0;
- complete(&dport->xmit_empty);
- } else {
- dport->xmit_tail += number_written;
- if (dport->xmit_tail >= SERIAL_XMIT_SIZE)
- dport->xmit_tail -= SERIAL_XMIT_SIZE;
- }
- atomic_sub(number_written, &dashtty_xmit_cnt);
- }
- mutex_unlock(&dport->xmit_lock);
-
- /* if we've made more data available, wake up tty */
- if (count && number_written) {
- tty = tty_port_tty_get(&dport->port);
- if (tty) {
- tty_wakeup(tty);
- tty_kref_put(tty);
- }
- }
-
- /* did the write fail? */
- return count && !number_written;
-}
-
-/**
- * put_data() - Kernel thread to write out blocks of channel data to DA.
- * @arg: Unused.
- *
- * This kernel thread runs while @dashtty_xmit_cnt != 0, and loops over the
- * channels to write out any buffered data. If any of the channels stall due to
- * the remote buffer being full, a hold off happens to allow the debugger to
- * drain the buffer.
- */
-static int put_data(void *arg)
-{
- unsigned int chan, stall;
-
- __set_current_state(TASK_RUNNING);
- while (!kthread_should_stop()) {
- /*
- * For each channel see if there's anything to transmit in the
- * port's xmit_buf.
- */
- stall = 0;
- for (chan = 0; chan < NUM_TTY_CHANNELS; ++chan)
- stall += put_channel_data(chan);
-
- /*
- * If some of the buffers are full, hold off for a short while
- * to allow them to empty.
- */
- if (stall)
- msleep(25);
-
- wait_event_interruptible(dashtty_waitqueue,
- atomic_read(&dashtty_xmit_cnt));
- }
-
- return 0;
-}
-
-/*
- * This gets called every DA_TTY_POLL and polls the channels for data
- */
-static void dashtty_timer(struct timer_list *poll_timer)
-{
- int channel;
-
- /* If there are no ports open do nothing and don't poll again. */
- if (!atomic_read(&num_channels_need_poll))
- return;
-
- channel = find_channel_to_poll();
-
- /* Did we find a channel to poll? */
- if (channel >= 0)
- fetch_data(channel);
-
- mod_timer(poll_timer, jiffies + DA_TTY_POLL);
-}
-
-static void add_poll_timer(struct timer_list *poll_timer)
-{
- timer_setup(poll_timer, dashtty_timer, TIMER_PINNED);
- poll_timer->expires = jiffies + DA_TTY_POLL;
-
- /*
- * Always attach the timer to the boot CPU. The DA channels are per-CPU
- * so all polling should be from a single CPU.
- */
- add_timer_on(poll_timer, 0);
-}
-
-static int dashtty_port_activate(struct tty_port *port, struct tty_struct *tty)
-{
- struct dashtty_port *dport = container_of(port, struct dashtty_port,
- port);
- void *rx_buf;
-
- /* Allocate the buffer we use for writing data */
- if (tty_port_alloc_xmit_buf(port) < 0)
- goto err;
-
- /* Allocate the buffer we use for reading data */
- rx_buf = kzalloc(RX_BUF_SIZE, GFP_KERNEL);
- if (!rx_buf)
- goto err_free_xmit;
-
- spin_lock_bh(&dport->rx_lock);
- dport->rx_buf = rx_buf;
- spin_unlock_bh(&dport->rx_lock);
-
- /*
- * Don't add the poll timer if we're opening a console. This
- * avoids the overhead of polling the Dash but means it is not
- * possible to have a login on /dev/console.
- *
- */
- if (console_poll || dport != &dashtty_ports[CONSOLE_CHANNEL])
- if (atomic_inc_return(&num_channels_need_poll) == 1)
- add_poll_timer(&poll_timer);
-
- return 0;
-err_free_xmit:
- tty_port_free_xmit_buf(port);
-err:
- return -ENOMEM;
-}
-
-static void dashtty_port_shutdown(struct tty_port *port)
-{
- struct dashtty_port *dport = container_of(port, struct dashtty_port,
- port);
- void *rx_buf;
- unsigned int count;
-
- /* stop reading */
- if (console_poll || dport != &dashtty_ports[CONSOLE_CHANNEL])
- if (atomic_dec_and_test(&num_channels_need_poll))
- del_timer_sync(&poll_timer);
-
- mutex_lock(&dport->xmit_lock);
- count = dport->xmit_cnt;
- mutex_unlock(&dport->xmit_lock);
- if (count) {
- /*
- * There's still data to write out, so wake and wait for the
- * writer thread to drain the buffer.
- */
- del_timer(&put_timer);
- wake_up_interruptible(&dashtty_waitqueue);
- wait_for_completion(&dport->xmit_empty);
- }
-
- /* Null the read buffer (timer could still be running!) */
- spin_lock_bh(&dport->rx_lock);
- rx_buf = dport->rx_buf;
- dport->rx_buf = NULL;
- spin_unlock_bh(&dport->rx_lock);
- /* Free the read buffer */
- kfree(rx_buf);
-
- /* Free the write buffer */
- tty_port_free_xmit_buf(port);
-}
-
-static const struct tty_port_operations dashtty_port_ops = {
- .activate = dashtty_port_activate,
- .shutdown = dashtty_port_shutdown,
-};
-
-static int dashtty_install(struct tty_driver *driver, struct tty_struct *tty)
-{
- return tty_port_install(&dashtty_ports[tty->index].port, driver, tty);
-}
-
-static int dashtty_open(struct tty_struct *tty, struct file *filp)
-{
- return tty_port_open(tty->port, tty, filp);
-}
-
-static void dashtty_close(struct tty_struct *tty, struct file *filp)
-{
- return tty_port_close(tty->port, tty, filp);
-}
-
-static void dashtty_hangup(struct tty_struct *tty)
-{
- int channel;
- struct dashtty_port *dport;
-
- channel = tty->index;
- dport = &dashtty_ports[channel];
-
- /* drop any data in the xmit buffer */
- mutex_lock(&dport->xmit_lock);
- if (dport->xmit_cnt) {
- atomic_sub(dport->xmit_cnt, &dashtty_xmit_cnt);
- dport->xmit_cnt = 0;
- dport->xmit_head = 0;
- dport->xmit_tail = 0;
- complete(&dport->xmit_empty);
- }
- mutex_unlock(&dport->xmit_lock);
-
- tty_port_hangup(tty->port);
-}
-
-/**
- * dashtty_put_timer() - Delayed wake up of kernel thread.
- * @ignored: unused
- *
- * This timer function wakes up the kernel thread if any data exists in the
- * buffers. It is used to delay the expensive writeout until the writer has
- * stopped writing.
- */
-static void dashtty_put_timer(struct timer_list *unused)
-{
- if (atomic_read(&dashtty_xmit_cnt))
- wake_up_interruptible(&dashtty_waitqueue);
-}
-
-static int dashtty_write(struct tty_struct *tty, const unsigned char *buf,
- int total)
-{
- int channel, count, block;
- struct dashtty_port *dport;
-
- /* Determine the channel */
- channel = tty->index;
- dport = &dashtty_ports[channel];
-
- /*
- * Write to output buffer.
- *
- * The reason that we asynchronously write the buffer is because if we
- * were to write the buffer synchronously then because DA channels are
- * per-CPU the buffer would be written to the channel of whatever CPU
- * we're running on.
- *
- * What we actually want to happen is have all input and output done on
- * one CPU.
- */
- mutex_lock(&dport->xmit_lock);
- /* work out how many bytes we can write to the xmit buffer */
- total = min(total, (int)(SERIAL_XMIT_SIZE - dport->xmit_cnt));
- atomic_add(total, &dashtty_xmit_cnt);
- dport->xmit_cnt += total;
- /* write the actual bytes (may need splitting if it wraps) */
- for (count = total; count; count -= block) {
- block = min(count, (int)(SERIAL_XMIT_SIZE - dport->xmit_head));
- memcpy(dport->port.xmit_buf + dport->xmit_head, buf, block);
- dport->xmit_head += block;
- if (dport->xmit_head >= SERIAL_XMIT_SIZE)
- dport->xmit_head -= SERIAL_XMIT_SIZE;
- buf += block;
- }
- count = dport->xmit_cnt;
- /* xmit buffer no longer empty? */
- if (count)
- reinit_completion(&dport->xmit_empty);
- mutex_unlock(&dport->xmit_lock);
-
- if (total) {
- /*
- * If the buffer is full, wake up the kthread, otherwise allow
- * some more time for the buffer to fill up a bit before waking
- * it.
- */
- if (count == SERIAL_XMIT_SIZE) {
- del_timer(&put_timer);
- wake_up_interruptible(&dashtty_waitqueue);
- } else {
- mod_timer(&put_timer, jiffies + DA_TTY_PUT_DELAY);
- }
- }
- return total;
-}
-
-static int dashtty_write_room(struct tty_struct *tty)
-{
- struct dashtty_port *dport;
- int channel;
- int room;
-
- channel = tty->index;
- dport = &dashtty_ports[channel];
-
- /* report the space in the xmit buffer */
- mutex_lock(&dport->xmit_lock);
- room = SERIAL_XMIT_SIZE - dport->xmit_cnt;
- mutex_unlock(&dport->xmit_lock);
-
- return room;
-}
-
-static int dashtty_chars_in_buffer(struct tty_struct *tty)
-{
- struct dashtty_port *dport;
- int channel;
- int chars;
-
- channel = tty->index;
- dport = &dashtty_ports[channel];
-
- /* report the number of bytes in the xmit buffer */
- mutex_lock(&dport->xmit_lock);
- chars = dport->xmit_cnt;
- mutex_unlock(&dport->xmit_lock);
-
- return chars;
-}
-
-static const struct tty_operations dashtty_ops = {
- .install = dashtty_install,
- .open = dashtty_open,
- .close = dashtty_close,
- .hangup = dashtty_hangup,
- .write = dashtty_write,
- .write_room = dashtty_write_room,
- .chars_in_buffer = dashtty_chars_in_buffer,
-};
-
-static int __init dashtty_init(void)
-{
- int ret;
- int nport;
- struct dashtty_port *dport;
-
- if (!metag_da_enabled())
- return -ENODEV;
-
- channel_driver = tty_alloc_driver(NUM_TTY_CHANNELS,
- TTY_DRIVER_REAL_RAW);
- if (IS_ERR(channel_driver))
- return PTR_ERR(channel_driver);
-
- channel_driver->driver_name = "metag_da";
- channel_driver->name = "ttyDA";
- channel_driver->major = DA_TTY_MAJOR;
- channel_driver->minor_start = 0;
- channel_driver->type = TTY_DRIVER_TYPE_SERIAL;
- channel_driver->subtype = SERIAL_TYPE_NORMAL;
- channel_driver->init_termios = tty_std_termios;
- channel_driver->init_termios.c_cflag |= CLOCAL;
-
- tty_set_operations(channel_driver, &dashtty_ops);
- for (nport = 0; nport < NUM_TTY_CHANNELS; nport++) {
- dport = &dashtty_ports[nport];
- tty_port_init(&dport->port);
- dport->port.ops = &dashtty_port_ops;
- spin_lock_init(&dport->rx_lock);
- mutex_init(&dport->xmit_lock);
- /* the xmit buffer starts empty, i.e. completely written */
- init_completion(&dport->xmit_empty);
- complete(&dport->xmit_empty);
- }
-
- timer_setup(&put_timer, dashtty_put_timer, 0);
-
- init_waitqueue_head(&dashtty_waitqueue);
- dashtty_thread = kthread_create(put_data, NULL, "ttyDA");
- if (IS_ERR(dashtty_thread)) {
- pr_err("Couldn't create dashtty thread\n");
- ret = PTR_ERR(dashtty_thread);
- goto err_destroy_ports;
- }
- /*
- * Bind the writer thread to the boot CPU so it can't migrate.
- * DA channels are per-CPU and we want all channel I/O to be on a single
- * predictable CPU.
- */
- kthread_bind(dashtty_thread, 0);
- wake_up_process(dashtty_thread);
-
- ret = tty_register_driver(channel_driver);
-
- if (ret < 0) {
- pr_err("Couldn't install dashtty driver: err %d\n",
- ret);
- goto err_stop_kthread;
- }
-
- return 0;
-
-err_stop_kthread:
- kthread_stop(dashtty_thread);
-err_destroy_ports:
- for (nport = 0; nport < NUM_TTY_CHANNELS; nport++) {
- dport = &dashtty_ports[nport];
- tty_port_destroy(&dport->port);
- }
- put_tty_driver(channel_driver);
- return ret;
-}
-device_initcall(dashtty_init);
-
-#ifdef CONFIG_DA_CONSOLE
-
-static void dash_console_write(struct console *co, const char *s,
- unsigned int count)
-{
- int actually_written;
-
- chancall(WRBUF, CONSOLE_CHANNEL, count, (void *)s, &actually_written);
-}
-
-static struct tty_driver *dash_console_device(struct console *c, int *index)
-{
- *index = c->index;
- return channel_driver;
-}
-
-struct console dash_console = {
- .name = "ttyDA",
- .write = dash_console_write,
- .device = dash_console_device,
- .flags = CON_PRINTBUFFER,
- .index = 1,
-};
-
-#endif