diff options
| -rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 72 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_txrx.c | 21 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 26 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/i40evf/i40e_txrx.h | 8 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/i40evf/i40evf.h | 7 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c | 206 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/i40evf/i40evf_main.c | 10 |
7 files changed, 280 insertions, 70 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index 5cad80f157fb..92bc8846f1ba 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -1970,11 +1970,22 @@ static int i40e_set_phys_id(struct net_device *netdev, * 125us (8000 interrupts per second) == ITR(62) */ +/** + * __i40e_get_coalesce - get per-queue coalesce settings + * @netdev: the netdev to check + * @ec: ethtool coalesce data structure + * @queue: which queue to pick + * + * Gets the per-queue settings for coalescence. Specifically Rx and Tx usecs + * are per queue. If queue is <0 then we default to queue 0 as the + * representative value. + **/ static int __i40e_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec, int queue) { struct i40e_netdev_priv *np = netdev_priv(netdev); + struct i40e_ring *rx_ring, *tx_ring; struct i40e_vsi *vsi = np->vsi; ec->tx_max_coalesced_frames_irq = vsi->work_limit; @@ -1989,14 +2000,18 @@ static int __i40e_get_coalesce(struct net_device *netdev, return -EINVAL; } - if (ITR_IS_DYNAMIC(vsi->rx_rings[queue]->rx_itr_setting)) + rx_ring = vsi->rx_rings[queue]; + tx_ring = vsi->tx_rings[queue]; + + if (ITR_IS_DYNAMIC(rx_ring->rx_itr_setting)) ec->use_adaptive_rx_coalesce = 1; - if (ITR_IS_DYNAMIC(vsi->tx_rings[queue]->tx_itr_setting)) + if (ITR_IS_DYNAMIC(tx_ring->tx_itr_setting)) ec->use_adaptive_tx_coalesce = 1; - ec->rx_coalesce_usecs = vsi->rx_rings[queue]->rx_itr_setting & ~I40E_ITR_DYNAMIC; - ec->tx_coalesce_usecs = vsi->tx_rings[queue]->tx_itr_setting & ~I40E_ITR_DYNAMIC; + ec->rx_coalesce_usecs = rx_ring->rx_itr_setting & ~I40E_ITR_DYNAMIC; + ec->tx_coalesce_usecs = tx_ring->tx_itr_setting & ~I40E_ITR_DYNAMIC; + /* we use the _usecs_high to store/set the interrupt rate limit * that the hardware supports, that almost but not quite @@ -2010,18 +2025,44 @@ static int __i40e_get_coalesce(struct net_device *netdev, return 0; } +/** + * i40e_get_coalesce - get a netdev's coalesce settings + * @netdev: the netdev to check + * @ec: ethtool coalesce data structure + * + * Gets the coalesce settings for a particular netdev. Note that if user has + * modified per-queue settings, this only guarantees to represent queue 0. See + * __i40e_get_coalesce for more details. + **/ static int i40e_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec) { return __i40e_get_coalesce(netdev, ec, -1); } +/** + * i40e_get_per_queue_coalesce - gets coalesce settings for particular queue + * @netdev: netdev structure + * @ec: ethtool's coalesce settings + * @queue: the particular queue to read + * + * Will read a specific queue's coalesce settings + **/ static int i40e_get_per_queue_coalesce(struct net_device *netdev, u32 queue, struct ethtool_coalesce *ec) { return __i40e_get_coalesce(netdev, ec, queue); } +/** + * i40e_set_itr_per_queue - set ITR values for specific queue + * @vsi: the VSI to set values for + * @ec: coalesce settings from ethtool + * @queue: the queue to modify + * + * Change the ITR settings for a specific queue. + **/ + static void i40e_set_itr_per_queue(struct i40e_vsi *vsi, struct ethtool_coalesce *ec, int queue) @@ -2060,6 +2101,14 @@ static void i40e_set_itr_per_queue(struct i40e_vsi *vsi, i40e_flush(hw); } +/** + * __i40e_set_coalesce - set coalesce settings for particular queue + * @netdev: the netdev to change + * @ec: ethtool coalesce settings + * @queue: the queue to change + * + * Sets the coalesce settings for a particular queue. + **/ static int __i40e_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec, int queue) @@ -2120,12 +2169,27 @@ static int __i40e_set_coalesce(struct net_device *netdev, return 0; } +/** + * i40e_set_coalesce - set coalesce settings for every queue on the netdev + * @netdev: the netdev to change + * @ec: ethtool coalesce settings + * + * This will set each queue to the same coalesce settings. + **/ static int i40e_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec) { return __i40e_set_coalesce(netdev, ec, -1); } +/** + * i40e_set_per_queue_coalesce - set specific queue's coalesce settings + * @netdev: the netdev to change + * @ec: ethtool's coalesce settings + * @queue: the queue to change + * + * Sets the specified queue's coalesce settings. + **/ static int i40e_set_per_queue_coalesce(struct net_device *netdev, u32 queue, struct ethtool_coalesce *ec) { diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 5237c491af89..6287bf63c43c 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -1877,6 +1877,15 @@ static u32 i40e_buildreg_itr(const int type, const u16 itr) /* a small macro to shorten up some long lines */ #define INTREG I40E_PFINT_DYN_CTLN +static inline int get_rx_itr_enabled(struct i40e_vsi *vsi, int idx) +{ + return !!(vsi->rx_rings[idx]->rx_itr_setting); +} + +static inline int get_tx_itr_enabled(struct i40e_vsi *vsi, int idx) +{ + return !!(vsi->tx_rings[idx]->tx_itr_setting); +} /** * i40e_update_enable_itr - Update itr and re-enable MSIX interrupt @@ -1892,6 +1901,7 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, u32 rxval, txval; int vector; int idx = q_vector->v_idx; + int rx_itr_setting, tx_itr_setting; vector = (q_vector->v_idx + vsi->base_vector); @@ -1900,18 +1910,21 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, */ rxval = txval = i40e_buildreg_itr(I40E_ITR_NONE, 0); + rx_itr_setting = get_rx_itr_enabled(vsi, idx); + tx_itr_setting = get_tx_itr_enabled(vsi, idx); + if (q_vector->itr_countdown > 0 || - (!ITR_IS_DYNAMIC(vsi->rx_rings[idx]->rx_itr_setting) && - !ITR_IS_DYNAMIC(vsi->tx_rings[idx]->tx_itr_setting))) { + (!ITR_IS_DYNAMIC(rx_itr_setting) && + !ITR_IS_DYNAMIC(tx_itr_setting))) { goto enable_int; } - if (ITR_IS_DYNAMIC(vsi->rx_rings[idx]->rx_itr_setting)) { + if (ITR_IS_DYNAMIC(tx_itr_setting)) { rx = i40e_set_new_dynamic_itr(&q_vector->rx); rxval = i40e_buildreg_itr(I40E_RX_ITR, q_vector->rx.itr); } - if (ITR_IS_DYNAMIC(vsi->tx_rings[idx]->tx_itr_setting)) { + if (ITR_IS_DYNAMIC(tx_itr_setting)) { tx = i40e_set_new_dynamic_itr(&q_vector->tx); txval = i40e_buildreg_itr(I40E_TX_ITR, q_vector->tx.itr); } diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c index d4c6a767be94..75f2a2cdd738 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -1311,6 +1311,19 @@ static u32 i40e_buildreg_itr(const int type, const u16 itr) /* a small macro to shorten up some long lines */ #define INTREG I40E_VFINT_DYN_CTLN1 +static inline int get_rx_itr_enabled(struct i40e_vsi *vsi, int idx) +{ + struct i40evf_adapter *adapter = vsi->back; + + return !!(adapter->rx_rings[idx].rx_itr_setting); +} + +static inline int get_tx_itr_enabled(struct i40e_vsi *vsi, int idx) +{ + struct i40evf_adapter *adapter = vsi->back; + + return !!(adapter->tx_rings[idx].tx_itr_setting); +} /** * i40e_update_enable_itr - Update itr and re-enable MSIX interrupt @@ -1325,6 +1338,8 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, bool rx = false, tx = false; u32 rxval, txval; int vector; + int idx = q_vector->v_idx; + int rx_itr_setting, tx_itr_setting; vector = (q_vector->v_idx + vsi->base_vector); @@ -1333,18 +1348,21 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, */ rxval = txval = i40e_buildreg_itr(I40E_ITR_NONE, 0); + rx_itr_setting = get_rx_itr_enabled(vsi, idx); + tx_itr_setting = get_tx_itr_enabled(vsi, idx); + if (q_vector->itr_countdown > 0 || - (!ITR_IS_DYNAMIC(vsi->rx_itr_setting) && - !ITR_IS_DYNAMIC(vsi->tx_itr_setting))) { + (!ITR_IS_DYNAMIC(rx_itr_setting) && + !ITR_IS_DYNAMIC(tx_itr_setting))) { goto enable_int; } - if (ITR_IS_DYNAMIC(vsi->rx_itr_setting)) { + if (ITR_IS_DYNAMIC(rx_itr_setting)) { rx = i40e_set_new_dynamic_itr(&q_vector->rx); rxval = i40e_buildreg_itr(I40E_RX_ITR, q_vector->rx.itr); } - if (ITR_IS_DYNAMIC(vsi->tx_itr_setting)) { + if (ITR_IS_DYNAMIC(tx_itr_setting)) { tx = i40e_set_new_dynamic_itr(&q_vector->tx); txval = i40e_buildreg_itr(I40E_TX_ITR, q_vector->tx.itr); } diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h index 84e561cc0166..abcdecabbc56 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h @@ -287,6 +287,14 @@ struct i40e_ring { u8 dcb_tc; /* Traffic class of ring */ u8 __iomem *tail; + /* high bit set means dynamic, use accessors routines to read/write. + * hardware only supports 2us resolution for the ITR registers. + * these values always store the USER setting, and must be converted + * before programming to a register. + */ + u16 rx_itr_setting; + u16 tx_itr_setting; + u16 count; /* Number of descriptors */ u16 reg_idx; /* HW register index of the ring */ u16 rx_buf_len; diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h index dc00aaf94687..c5fd724313c7 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf.h +++ b/drivers/net/ethernet/intel/i40evf/i40evf.h @@ -59,13 +59,6 @@ struct i40e_vsi { unsigned long state; int base_vector; u16 work_limit; - /* high bit set means dynamic, use accessor routines to read/write. - * hardware only supports 2us resolution for the ITR registers. - * these values always store the USER setting, and must be converted - * before programming to a register. - */ - u16 rx_itr_setting; - u16 tx_itr_setting; u16 qs_handle; }; diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c b/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c index e17a15456266..a9940154eead 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c @@ -296,93 +296,207 @@ static int i40evf_set_ringparam(struct net_device *netdev, } /** - * i40evf_get_coalesce - Get interrupt coalescing settings - * @netdev: network interface device structure - * @ec: ethtool coalesce structure + * __i40evf_get_coalesce - get per-queue coalesce settings + * @netdev: the netdev to check + * @ec: ethtool coalesce data structure + * @queue: which queue to pick * - * Returns current coalescing settings. This is referred to elsewhere in the - * driver as Interrupt Throttle Rate, as this is how the hardware describes - * this functionality. + * Gets the per-queue settings for coalescence. Specifically Rx and Tx usecs + * are per queue. If queue is <0 then we default to queue 0 as the + * representative value. **/ -static int i40evf_get_coalesce(struct net_device *netdev, - struct ethtool_coalesce *ec) +static int __i40evf_get_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec, + int queue) { struct i40evf_adapter *adapter = netdev_priv(netdev); struct i40e_vsi *vsi = &adapter->vsi; + struct i40e_ring *rx_ring, *tx_ring; ec->tx_max_coalesced_frames = vsi->work_limit; ec->rx_max_coalesced_frames = vsi->work_limit; - if (ITR_IS_DYNAMIC(vsi->rx_itr_setting)) + /* Rx and Tx usecs per queue value. If user doesn't specify the + * queue, return queue 0's value to represent. + */ + if (queue < 0) + queue = 0; + else if (queue >= adapter->num_active_queues) + return -EINVAL; + + rx_ring = &adapter->rx_rings[queue]; + tx_ring = &adapter->tx_rings[queue]; + + if (ITR_IS_DYNAMIC(rx_ring->rx_itr_setting)) ec->use_adaptive_rx_coalesce = 1; - if (ITR_IS_DYNAMIC(vsi->tx_itr_setting)) + if (ITR_IS_DYNAMIC(tx_ring->tx_itr_setting)) ec->use_adaptive_tx_coalesce = 1; - ec->rx_coalesce_usecs = vsi->rx_itr_setting & ~I40E_ITR_DYNAMIC; - ec->tx_coalesce_usecs = vsi->tx_itr_setting & ~I40E_ITR_DYNAMIC; + ec->rx_coalesce_usecs = rx_ring->rx_itr_setting & ~I40E_ITR_DYNAMIC; + ec->tx_coalesce_usecs = tx_ring->tx_itr_setting & ~I40E_ITR_DYNAMIC; return 0; } /** - * i40evf_set_coalesce - Set interrupt coalescing settings + * i40evf_get_coalesce - Get interrupt coalescing settings * @netdev: network interface device structure * @ec: ethtool coalesce structure * - * Change current coalescing settings. + * Returns current coalescing settings. This is referred to elsewhere in the + * driver as Interrupt Throttle Rate, as this is how the hardware describes + * this functionality. Note that if per-queue settings have been modified this + * only represents the settings of queue 0. **/ -static int i40evf_set_coalesce(struct net_device *netdev, +static int i40evf_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec) { - struct i40evf_adapter *adapter = netdev_priv(netdev); - struct i40e_hw *hw = &adapter->hw; + return __i40evf_get_coalesce(netdev, ec, -1); +} + +/** + * i40evf_get_per_queue_coalesce - get coalesce values for specific queue + * @netdev: netdev to read + * @ec: coalesce settings from ethtool + * @queue: the queue to read + * + * Read specific queue's coalesce settings. + **/ +static int i40evf_get_per_queue_coalesce(struct net_device *netdev, + u32 queue, + struct ethtool_coalesce *ec) +{ + return __i40evf_get_coalesce(netdev, ec, queue); +} + +/** + * i40evf_set_itr_per_queue - set ITR values for specific queue + * @vsi: the VSI to set values for + * @ec: coalesce settings from ethtool + * @queue: the queue to modify + * + * Change the ITR settings for a specific queue. + **/ +static void i40evf_set_itr_per_queue(struct i40evf_adapter *adapter, + struct ethtool_coalesce *ec, + int queue) +{ struct i40e_vsi *vsi = &adapter->vsi; + struct i40e_hw *hw = &adapter->hw; struct i40e_q_vector *q_vector; + u16 vector; + + adapter->rx_rings[queue].rx_itr_setting = ec->rx_coalesce_usecs; + adapter->tx_rings[queue].tx_itr_setting = ec->tx_coalesce_usecs; + + if (ec->use_adaptive_rx_coalesce) + adapter->rx_rings[queue].rx_itr_setting |= I40E_ITR_DYNAMIC; + else + adapter->rx_rings[queue].rx_itr_setting &= ~I40E_ITR_DYNAMIC; + + if (ec->use_adaptive_tx_coalesce) + adapter->tx_rings[queue].tx_itr_setting |= I40E_ITR_DYNAMIC; + else + adapter->tx_rings[queue].tx_itr_setting &= ~I40E_ITR_DYNAMIC; + + q_vector = adapter->rx_rings[queue].q_vector; + q_vector->rx.itr = ITR_TO_REG(adapter->rx_rings[queue].rx_itr_setting); + vector = vsi->base_vector + q_vector->v_idx; + wr32(hw, I40E_VFINT_ITRN1(I40E_RX_ITR, vector - 1), q_vector->rx.itr); + + q_vector = adapter->tx_rings[queue].q_vector; + q_vector->tx.itr = ITR_TO_REG(adapter->tx_rings[queue].tx_itr_setting); + vector = vsi->base_vector + q_vector->v_idx; + wr32(hw, I40E_VFINT_ITRN1(I40E_TX_ITR, vector - 1), q_vector->tx.itr); + + i40e_flush(hw); +} + +/** + * __i40evf_set_coalesce - set coalesce settings for particular queue + * @netdev: the netdev to change + * @ec: ethtool coalesce settings + * @queue: the queue to change + * + * Sets the coalesce settings for a particular queue. + **/ +static int __i40evf_set_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec, + int queue) +{ + struct i40evf_adapter *adapter = netdev_priv(netdev); + struct i40e_vsi *vsi = &adapter->vsi; int i; if (ec->tx_max_coalesced_frames_irq || ec->rx_max_coalesced_frames_irq) vsi->work_limit = ec->tx_max_coalesced_frames_irq; - if ((ec->rx_coalesce_usecs >= (I40E_MIN_ITR << 1)) && - (ec->rx_coalesce_usecs <= (I40E_MAX_ITR << 1))) - vsi->rx_itr_setting = ec->rx_coalesce_usecs; - - else + if (ec->rx_coalesce_usecs == 0) { + if (ec->use_adaptive_rx_coalesce) + netif_info(adapter, drv, netdev, "rx-usecs=0, need to disable adaptive-rx for a complete disable\n"); + } else if ((ec->rx_coalesce_usecs < (I40E_MIN_ITR << 1)) || + (ec->rx_coalesce_usecs > (I40E_MAX_ITR << 1))) { + netif_info(adapter, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n"); return -EINVAL; + } - if ((ec->tx_coalesce_usecs >= (I40E_MIN_ITR << 1)) && - (ec->tx_coalesce_usecs <= (I40E_MAX_ITR << 1))) - vsi->tx_itr_setting = ec->tx_coalesce_usecs; - else if (ec->use_adaptive_tx_coalesce) - vsi->tx_itr_setting = (I40E_ITR_DYNAMIC | - ITR_REG_TO_USEC(I40E_ITR_RX_DEF)); else + if (ec->tx_coalesce_usecs == 0) { + if (ec->use_adaptive_tx_coalesce) + netif_info(adapter, drv, netdev, "tx-usecs=0, need to disable adaptive-tx for a complete disable\n"); + } else if ((ec->tx_coalesce_usecs < (I40E_MIN_ITR << 1)) || + (ec->tx_coalesce_usecs > (I40E_MAX_ITR << 1))) { + netif_info(adapter, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n"); return -EINVAL; + } - if (ec->use_adaptive_rx_coalesce) - vsi->rx_itr_setting |= I40E_ITR_DYNAMIC; - else - vsi->rx_itr_setting &= ~I40E_ITR_DYNAMIC; - - if (ec->use_adaptive_tx_coalesce) - vsi->tx_itr_setting |= I40E_ITR_DYNAMIC; - else - vsi->tx_itr_setting &= ~I40E_ITR_DYNAMIC; - - for (i = 0; i < adapter->num_msix_vectors - NONQ_VECS; i++) { - q_vector = &adapter->q_vectors[i]; - q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting); - wr32(hw, I40E_VFINT_ITRN1(0, i), q_vector->rx.itr); - q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting); - wr32(hw, I40E_VFINT_ITRN1(1, i), q_vector->tx.itr); - i40e_flush(hw); + /* Rx and Tx usecs has per queue value. If user doesn't specify the + * queue, apply to all queues. + */ + if (queue < 0) { + for (i = 0; i < adapter->num_active_queues; i++) + i40evf_set_itr_per_queue(adapter, ec, i); + } else if (queue < adapter->num_active_queues) { + i40evf_set_itr_per_queue(adapter, ec, queue); + } else { + netif_info(adapter, drv, netdev, "Invalid queue value, queue range is 0 - %d\n", + adapter->num_active_queues - 1); + return -EINVAL; } return 0; } /** + * i40evf_set_coalesce - Set interrupt coalescing settings + * @netdev: network interface device structure + * @ec: ethtool coalesce structure + * + * Change current coalescing settings for every queue. + **/ +static int i40evf_set_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec) +{ + return __i40evf_set_coalesce(netdev, ec, -1); +} + +/** + * i40evf_set_per_queue_coalesce - set specific queue's coalesce settings + * @netdev: the netdev to change + * @ec: ethtool's coalesce settings + * @queue: the queue to modify + * + * Modifies a specific queue's coalesce settings. + */ +static int i40evf_set_per_queue_coalesce(struct net_device *netdev, + u32 queue, + struct ethtool_coalesce *ec) +{ + return __i40evf_set_coalesce(netdev, ec, queue); +} + +/** * i40evf_get_rxnfc - command to get RX flow classification rules * @netdev: network interface device structure * @cmd: ethtool rxnfc command @@ -533,6 +647,8 @@ static const struct ethtool_ops i40evf_ethtool_ops = { .set_msglevel = i40evf_set_msglevel, .get_coalesce = i40evf_get_coalesce, .set_coalesce = i40evf_set_coalesce, + .get_per_queue_coalesce = i40evf_get_per_queue_coalesce, + .set_per_queue_coalesce = i40evf_set_per_queue_coalesce, .get_rxnfc = i40evf_get_rxnfc, .get_rxfh_indir_size = i40evf_get_rxfh_indir_size, .get_rxfh = i40evf_get_rxfh, diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 302c9743ef44..14372810fc27 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -370,7 +370,6 @@ i40evf_map_vector_to_rxq(struct i40evf_adapter *adapter, int v_idx, int r_idx) { struct i40e_q_vector *q_vector = &adapter->q_vectors[v_idx]; struct i40e_ring *rx_ring = &adapter->rx_rings[r_idx]; - struct i40e_vsi *vsi = &adapter->vsi; struct i40e_hw *hw = &adapter->hw; rx_ring->q_vector = q_vector; @@ -379,7 +378,7 @@ i40evf_map_vector_to_rxq(struct i40evf_adapter *adapter, int v_idx, int r_idx) q_vector->rx.ring = rx_ring; q_vector->rx.count++; q_vector->rx.latency_range = I40E_LOW_LATENCY; - q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting); + q_vector->rx.itr = ITR_TO_REG(rx_ring->rx_itr_setting); q_vector->ring_mask |= BIT(r_idx); q_vector->itr_countdown = ITR_COUNTDOWN_START; wr32(hw, I40E_VFINT_ITRN1(I40E_RX_ITR, v_idx - 1), q_vector->rx.itr); @@ -396,7 +395,6 @@ i40evf_map_vector_to_txq(struct i40evf_adapter *adapter, int v_idx, int t_idx) { struct i40e_q_vector *q_vector = &adapter->q_vectors[v_idx]; struct i40e_ring *tx_ring = &adapter->tx_rings[t_idx]; - struct i40e_vsi *vsi = &adapter->vsi; struct i40e_hw *hw = &adapter->hw; tx_ring->q_vector = q_vector; @@ -405,7 +403,7 @@ i40evf_map_vector_to_txq(struct i40evf_adapter *adapter, int v_idx, int t_idx) q_vector->tx.ring = tx_ring; q_vector->tx.count++; q_vector->tx.latency_range = I40E_LOW_LATENCY; - q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting); + q_vector->tx.itr = ITR_TO_REG(tx_ring->tx_itr_setting); q_vector->itr_countdown = ITR_COUNTDOWN_START; q_vector->num_ringpairs++; wr32(hw, I40E_VFINT_ITRN1(I40E_TX_ITR, v_idx - 1), q_vector->tx.itr); @@ -1162,6 +1160,7 @@ static int i40evf_alloc_queues(struct i40evf_adapter *adapter) tx_ring->netdev = adapter->netdev; tx_ring->dev = &adapter->pdev->dev; tx_ring->count = adapter->tx_desc_count; + tx_ring->tx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_TX_DEF); if (adapter->flags & I40E_FLAG_WB_ON_ITR_CAPABLE) tx_ring->flags |= I40E_TXR_FLAGS_WB_ON_ITR; @@ -1170,6 +1169,7 @@ static int i40evf_alloc_queues(struct i40evf_adapter *adapter) rx_ring->netdev = adapter->netdev; rx_ring->dev = &adapter->pdev->dev; rx_ring->count = adapter->rx_desc_count; + rx_ring->rx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_RX_DEF); } return 0; @@ -2277,8 +2277,6 @@ int i40evf_process_config(struct i40evf_adapter *adapter) adapter->vsi.back = adapter; adapter->vsi.base_vector = 1; adapter->vsi.work_limit = I40E_DEFAULT_IRQ_WORK; - adapter->vsi.rx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_RX_DEF); - adapter->vsi.tx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_TX_DEF); vsi->netdev = adapter->netdev; vsi->qs_handle = adapter->vsi_res->qset_handle; if (vfres->vf_offload_flags & I40E_VIRTCHNL_VF_OFFLOAD_RSS_PF) { |