summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/hsi/omap-ssi.txt13
-rw-r--r--drivers/hsi/clients/hsi_char.c4
-rw-r--r--drivers/hsi/controllers/omap_ssi_core.c6
3 files changed, 15 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
index b8eca3c7810d..955e335e7e56 100644
--- a/Documentation/devicetree/bindings/hsi/omap-ssi.txt
+++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
@@ -1,10 +1,12 @@
OMAP SSI controller bindings
-OMAP Synchronous Serial Interface (SSI) controller implements a legacy
-variant of MIPI's High Speed Synchronous Serial Interface (HSI).
+OMAP3's Synchronous Serial Interface (SSI) controller implements a
+legacy variant of MIPI's High Speed Synchronous Serial Interface (HSI),
+while the controller found inside OMAP4 is supposed to be fully compliant
+with the HSI standard.
Required properties:
-- compatible: Should include "ti,omap3-ssi".
+- compatible: Should include "ti,omap3-ssi" or "ti,omap4-hsi"
- reg-names: Contains the values "sys" and "gdd" (in this order).
- reg: Contains a matching register specifier for each entry
in reg-names.
@@ -27,6 +29,7 @@ Each port is represented as a sub-node of the ti,omap3-ssi device.
Required Port sub-node properties:
- compatible: Should be set to the following value
ti,omap3-ssi-port (applicable to OMAP34xx devices)
+ ti,omap4-hsi-port (applicable to OMAP44xx devices)
- reg-names: Contains the values "tx" and "rx" (in this order).
- reg: Contains a matching register specifier for each entry
in reg-names.
@@ -38,6 +41,10 @@ Required Port sub-node properties:
property. If it's missing the port will not be
enabled.
+Optional properties:
+- ti,hwmods: Shall contain TI interconnect module name if needed
+ by the SoC
+
Example for Nokia N900:
ssi-controller@48058000 {
diff --git a/drivers/hsi/clients/hsi_char.c b/drivers/hsi/clients/hsi_char.c
index 57f70c28fa38..cf9c2a332ad8 100644
--- a/drivers/hsi/clients/hsi_char.c
+++ b/drivers/hsi/clients/hsi_char.c
@@ -773,13 +773,13 @@ static int __init hsc_init(void)
if ((max_data_size < 4) || (max_data_size > 0x10000) ||
(max_data_size & (max_data_size - 1))) {
- pr_err("Invalid max read/write data size");
+ pr_err("Invalid max read/write data size\n");
return -EINVAL;
}
ret = hsi_register_client_driver(&hsc_driver);
if (ret) {
- pr_err("Error while registering HSI/SSI driver %d", ret);
+ pr_err("Error while registering HSI/SSI driver %d\n", ret);
return ret;
}
diff --git a/drivers/hsi/controllers/omap_ssi_core.c b/drivers/hsi/controllers/omap_ssi_core.c
index 88e48b346916..41a09f506803 100644
--- a/drivers/hsi/controllers/omap_ssi_core.c
+++ b/drivers/hsi/controllers/omap_ssi_core.c
@@ -334,7 +334,7 @@ static int ssi_clk_event(struct notifier_block *nb, unsigned long event,
case POST_RATE_CHANGE:
dev_dbg(&ssi->device, "post rate change (%lu -> %lu)\n",
clk_data->old_rate, clk_data->new_rate);
- omap_ssi->fck_rate = DIV_ROUND_CLOSEST(clk_data->new_rate, 1000); /* KHz */
+ omap_ssi->fck_rate = DIV_ROUND_CLOSEST(clk_data->new_rate, 1000); /* kHz */
for (i = 0; i < ssi->num_ports; i++) {
omap_port = omap_ssi->port[i];
@@ -467,9 +467,9 @@ static int ssi_hw_init(struct hsi_controller *ssi)
}
/* Resetting GDD */
writel_relaxed(SSI_SWRESET, omap_ssi->gdd + SSI_GDD_GRST_REG);
- /* Get FCK rate in KHz */
+ /* Get FCK rate in kHz */
omap_ssi->fck_rate = DIV_ROUND_CLOSEST(ssi_get_clk_rate(ssi), 1000);
- dev_dbg(&ssi->device, "SSI fck rate %lu KHz\n", omap_ssi->fck_rate);
+ dev_dbg(&ssi->device, "SSI fck rate %lu kHz\n", omap_ssi->fck_rate);
writel_relaxed(SSI_CLK_AUTOGATING_ON, omap_ssi->sys + SSI_GDD_GCR_REG);
omap_ssi->gdd_gcr = SSI_CLK_AUTOGATING_ON;