summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/powerpc/booting-without-of.txt4
-rw-r--r--arch/powerpc/configs/chrp32_defconfig1378
-rw-r--r--arch/powerpc/configs/mpc834x_itx_defconfig1336
-rw-r--r--arch/powerpc/kernel/btext.c20
-rw-r--r--arch/powerpc/kernel/ibmebus.c9
-rw-r--r--arch/powerpc/kernel/irq.c653
-rw-r--r--arch/powerpc/kernel/legacy_serial.c57
-rw-r--r--arch/powerpc/kernel/misc_64.S10
-rw-r--r--arch/powerpc/kernel/pci_32.c37
-rw-r--r--arch/powerpc/kernel/pci_64.c33
-rw-r--r--arch/powerpc/kernel/prom.c454
-rw-r--r--arch/powerpc/kernel/prom_init.c20
-rw-r--r--arch/powerpc/kernel/prom_parse.c443
-rw-r--r--arch/powerpc/kernel/rtas_pci.c17
-rw-r--r--arch/powerpc/kernel/setup_32.c2
-rw-r--r--arch/powerpc/kernel/setup_64.c17
-rw-r--r--arch/powerpc/kernel/vio.c12
-rw-r--r--arch/powerpc/platforms/83xx/Kconfig11
-rw-r--r--arch/powerpc/platforms/83xx/Makefile1
-rw-r--r--arch/powerpc/platforms/83xx/mpc834x_itx.c156
-rw-r--r--arch/powerpc/platforms/83xx/mpc834x_itx.h23
-rw-r--r--arch/powerpc/platforms/cell/interrupt.c419
-rw-r--r--arch/powerpc/platforms/cell/interrupt.h19
-rw-r--r--arch/powerpc/platforms/cell/setup.c22
-rw-r--r--arch/powerpc/platforms/cell/spider-pic.c394
-rw-r--r--arch/powerpc/platforms/cell/spu_base.c119
-rw-r--r--arch/powerpc/platforms/chrp/pci.c11
-rw-r--r--arch/powerpc/platforms/chrp/setup.c101
-rw-r--r--arch/powerpc/platforms/chrp/smp.c1
-rw-r--r--arch/powerpc/platforms/iseries/irq.c105
-rw-r--r--arch/powerpc/platforms/iseries/irq.h2
-rw-r--r--arch/powerpc/platforms/iseries/setup.c8
-rw-r--r--arch/powerpc/platforms/maple/pci.c17
-rw-r--r--arch/powerpc/platforms/maple/setup.c94
-rw-r--r--arch/powerpc/platforms/powermac/bootx_init.c33
-rw-r--r--arch/powerpc/platforms/powermac/low_i2c.c9
-rw-r--r--arch/powerpc/platforms/powermac/nvram.c5
-rw-r--r--arch/powerpc/platforms/powermac/pci.c68
-rw-r--r--arch/powerpc/platforms/powermac/pfunc_base.c13
-rw-r--r--arch/powerpc/platforms/powermac/pic.c422
-rw-r--r--arch/powerpc/platforms/powermac/pmac.h2
-rw-r--r--arch/powerpc/platforms/powermac/setup.c3
-rw-r--r--arch/powerpc/platforms/pseries/ras.c82
-rw-r--r--arch/powerpc/platforms/pseries/setup.c244
-rw-r--r--arch/powerpc/platforms/pseries/smp.c32
-rw-r--r--arch/powerpc/platforms/pseries/xics.c718
-rw-r--r--arch/powerpc/platforms/pseries/xics.h17
-rw-r--r--arch/powerpc/sysdev/Makefile5
-rw-r--r--arch/powerpc/sysdev/i8259.c163
-rw-r--r--arch/powerpc/sysdev/mpic.c482
-rw-r--r--arch/ppc/syslib/Makefile2
-rw-r--r--arch/ppc/syslib/i8259.c212
-rw-r--r--drivers/block/swim3.c230
-rw-r--r--drivers/char/hvsi.c7
-rw-r--r--drivers/macintosh/macio-adb.c19
-rw-r--r--drivers/macintosh/macio_asic.c152
-rw-r--r--drivers/macintosh/smu.c6
-rw-r--r--drivers/macintosh/via-cuda.c24
-rw-r--r--drivers/macintosh/via-pmu.c33
-rw-r--r--drivers/net/mace.c4
-rw-r--r--drivers/serial/pmac_zilog.c6
-rw-r--r--drivers/video/offb.c284
-rw-r--r--include/asm-powerpc/i8259.h8
-rw-r--r--include/asm-powerpc/irq.h358
-rw-r--r--include/asm-powerpc/machdep.h2
-rw-r--r--include/asm-powerpc/mpic.h67
-rw-r--r--include/asm-powerpc/prom.h98
-rw-r--r--include/asm-powerpc/spu.h1
-rw-r--r--kernel/irq/chip.c5
-rw-r--r--sound/aoa/core/snd-aoa-gpio-feature.c7
-rw-r--r--sound/aoa/soundbus/i2sbus/i2sbus-core.c7
-rw-r--r--sound/oss/dmasound/dmasound_awacs.c16
-rw-r--r--sound/ppc/pmac.c33
-rw-r--r--sound/ppc/tumbler.c8
74 files changed, 7149 insertions, 2743 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 217e51768b87..3c62e66e1fcc 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1436,9 +1436,9 @@ platforms are moved over to use the flattened-device-tree model.
interrupts = <1d 3>;
interrupt-parent = <40000>;
num-channels = <4>;
- channel-fifo-len = <24>;
+ channel-fifo-len = <18>;
exec-units-mask = <000000fe>;
- descriptor-types-mask = <073f1127>;
+ descriptor-types-mask = <012b0ebf>;
};
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
new file mode 100644
index 000000000000..0fa010a63a8e
--- /dev/null
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -0,0 +1,1378 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Mon Jul 3 12:08:41 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+
+#
+# Processor support
+#
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Block layer
+#
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
+CONFIG_PPC_CHRP=y
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_MPIC=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+# CONFIG_MMIO_NVRAM is not set
+CONFIG_PPC_MPC106=y
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_KEXEC is not set
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ISA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_I8259=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
+# CONFIG_IP_NF_QUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_FD=y
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_SL82C105=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_NCR53C406A is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+# CONFIG_TULIP is not set
+CONFIG_DE4X5=y
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+CONFIG_VIA_RHINE=y
+# CONFIG_VIA_RHINE_MMIO is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_MV643XX_ETH_0 is not set
+# CONFIG_MV643XX_ETH_1 is not set
+# CONFIG_MV643XX_ETH_2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_PCSPKR is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_RTAS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_NVRAM=y
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_HYDRA is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_MACMODES=y
+CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+# CONFIG_FB_MATROX_I2C is not set
+# CONFIG_FB_MATROX_MULTIHEAD is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+CONFIG_FB_ATY=y
+CONFIG_FB_ATY_CT=y
+# CONFIG_FB_ATY_GENERIC_LCD is not set
+CONFIG_FB_ATY_GX=y
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+CONFIG_FB_3DFX=y
+# CONFIG_FB_3DFX_ACCEL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUGGER=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig
new file mode 100644
index 000000000000..fc2d9789adc8
--- /dev/null
+++ b/arch/powerpc/configs/mpc834x_itx_defconfig
@@ -0,0 +1,1336 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Fri Jun 30 17:53:25 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_DEFAULT_UIMAGE=y
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_83xx=y
+CONFIG_PPC_FPU=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_SMP is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_PPC_GEN550=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Platform support
+#
+# CONFIG_MPC834x_SYS is not set
+CONFIG_MPC834x_ITX=y
+CONFIG_MPC834x=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xfe000000
+CONFIG_MTD_PHYSMAP_LEN=0x1000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+# CONFIG_BLK_DEV_IDE is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+CONFIG_SCSI_SATA=y
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+CONFIG_SCSI_SATA_SIL=y
+# CONFIG_SCSI_SATA_SIL24 is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID456 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+CONFIG_CICADA_PHY=y
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_MPC83xx=y
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_NET2280=y
+CONFIG_USB_NET2280=y
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_IOATDMA=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_BOOTX_TEXT=y
+CONFIG_SERIAL_TEXT_DEBUG=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index a6920919d68e..f4e5e14ee2b6 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -111,7 +111,7 @@ void __init btext_setup_display(int width, int height, int depth, int pitch,
logicalDisplayBase = (unsigned char *)address;
dispDeviceBase = (unsigned char *)address;
dispDeviceRowBytes = pitch;
- dispDeviceDepth = depth;
+ dispDeviceDepth = depth == 15 ? 16 : depth;
dispDeviceRect[0] = dispDeviceRect[1] = 0;
dispDeviceRect[2] = width;
dispDeviceRect[3] = height;
@@ -160,20 +160,28 @@ int btext_initialize(struct device_node *np)
unsigned long address = 0;
u32 *prop;
- prop = (u32 *)get_property(np, "width", NULL);
+ prop = (u32 *)get_property(np, "linux,bootx-width", NULL);
+ if (prop == NULL)
+ prop = (u32 *)get_property(np, "width", NULL);
if (prop == NULL)
return -EINVAL;
width = *prop;
- prop = (u32 *)get_property(np, "height", NULL);
+ prop = (u32 *)get_property(np, "linux,bootx-height", NULL);
+ if (prop == NULL)
+ prop = (u32 *)get_property(np, "height", NULL);
if (prop == NULL)
return -EINVAL;
height = *prop;
- prop = (u32 *)get_property(np, "depth", NULL);
+ prop = (u32 *)get_property(np, "linux,bootx-depth", NULL);
+ if (prop == NULL)
+ prop = (u32 *)get_property(np, "depth", NULL);
if (prop == NULL)
return -EINVAL;
depth = *prop;
pitch = width * ((depth + 7) / 8);
- prop = (u32 *)get_property(np, "linebytes", NULL);
+ prop = (u32 *)get_property(np, "linux,bootx-linebytes", NULL);
+ if (prop == NULL)
+ prop = (u32 *)get_property(np, "linebytes", NULL);
if (prop)
pitch = *prop;
if (pitch == 1)
@@ -194,7 +202,7 @@ int btext_initialize(struct device_node *np)
g_max_loc_Y = height / 16;
dispDeviceBase = (unsigned char *)address;
dispDeviceRowBytes = pitch;
- dispDeviceDepth = depth;
+ dispDeviceDepth = depth == 15 ? 16 : depth;
dispDeviceRect[0] = dispDeviceRect[1] = 0;
dispDeviceRect[2] = width;
dispDeviceRect[3] = height;
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index e47d40ac6f39..97ddc02a3d42 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -323,13 +323,11 @@ int ibmebus_request_irq(struct ibmebus_dev *dev,
unsigned long irq_flags, const char * devname,
void *dev_id)
{
- unsigned int irq = virt_irq_create_mapping(ist);
+ unsigned int irq = irq_create_mapping(NULL, ist, 0);
if (irq == NO_IRQ)
return -EINVAL;
- irq = irq_offset_up(irq);
-
return request_irq(irq, handler,
irq_flags, devname, dev_id);
}
@@ -337,12 +335,9 @@ EXPORT_SYMBOL(ibmebus_request_irq);
void ibmebus_free_irq(struct ibmebus_dev *dev, u32 ist, void *dev_id)
{
- unsigned int irq = virt_irq_create_mapping(ist);
+ unsigned int irq = irq_find_mapping(NULL, ist);
- irq = irq_offset_up(irq);
free_irq(irq, dev_id);
-
- return;
}
EXPORT_SYMBOL(ibmebus_free_irq);
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index e3774f6b57cc..8cf987809c66 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -29,6 +29,8 @@
* to reduce code space and undefined function references.
*/
+#undef DEBUG
+
#include <linux/module.h>
#include <linux/threads.h>
#include <linux/kernel_stat.h>
@@ -46,7 +48,10 @@
#include <linux/cpumask.h>
#include <linux/profile.h>
#include <linux/bitops.h>
-#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/radix-tree.h>
+#include <linux/mutex.h>
+#include <linux/bootmem.h>
#include <asm/uaccess.h>
#include <asm/system.h>
@@ -57,39 +62,38 @@
#include <asm/prom.h>
#include <asm/ptrace.h>
#include <asm/machdep.h>
+#include <asm/udbg.h>
#ifdef CONFIG_PPC_ISERIES
#include <asm/paca.h>
#endif
int __irq_offset_value;
-#ifdef CONFIG_PPC32
-EXPORT_SYMBOL(__irq_offset_value);
-#endif
-
static int ppc_spurious_interrupts;
#ifdef CONFIG_PPC32
-#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
+EXPORT_SYMBOL(__irq_offset_value);
+atomic_t ppc_n_lost_interrupts;
+#ifndef CONFIG_PPC_MERGE
+#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-atomic_t ppc_n_lost_interrupts;
+#endif
#ifdef CONFIG_TAU_INT
extern int tau_initialized;
extern int tau_interrupts(int);
#endif
+#endif /* CONFIG_PPC32 */
#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
extern atomic_t ipi_recv;
extern atomic_t ipi_sent;
#endif
-#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PPC64
EXPORT_SYMBOL(irq_desc);
int distribute_irqs = 1;
-u64 ppc64_interrupt_controller;
#endif /* CONFIG_PPC64 */
int show_interrupts(struct seq_file *p, void *v)
@@ -182,7 +186,7 @@ void fixup_irqs(cpumask_t map)
void do_IRQ(struct pt_regs *regs)
{
- int irq;
+ unsigned int irq;
#ifdef CONFIG_IRQSTACKS
struct thread_info *curtp, *irqtp;
#endif
@@ -213,22 +217,26 @@ void do_IRQ(struct pt_regs *regs)
*/
irq = ppc_md.get_irq(regs);
- if (irq >= 0) {
+ if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
#ifdef CONFIG_IRQSTACKS
/* Switch to the irq stack to handle this */
curtp = current_thread_info();
irqtp = hardirq_ctx[smp_processor_id()];
if (curtp != irqtp) {
+ struct irq_desc *desc = irq_desc + irq;
+ void *handler = desc->handle_irq;
+ if (handler == NULL)
+ handler = &__do_IRQ;
irqtp->task = curtp->task;
irqtp->flags = 0;
- call___do_IRQ(irq, regs, irqtp);
+ call_handle_irq(irq, desc, regs, irqtp, handler);
irqtp->task = NULL;
if (irqtp->flags)
set_bits(irqtp->flags, &curtp->flags);
} else
#endif
- __do_IRQ(irq, regs);
- } else if (irq != -2)
+ generic_handle_irq(irq, regs);
+ } else if (irq != NO_IRQ_IGNORE)
/* That's not SMP safe ... but who cares ? */
ppc_spurious_interrupts++;
@@ -245,191 +253,562 @@ void do_IRQ(struct pt_regs *regs)
void __init init_IRQ(void)
{
+ ppc_md.init_IRQ();
#ifdef CONFIG_PPC64
- static int once = 0;
+ irq_ctx_init();
+#endif
+}
+
+
+#ifdef CONFIG_IRQSTACKS
+struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
+struct thread_info *hardirq_ctx[NR_CPUS] __read_mostly;
+
+void irq_ctx_init(void)
+{
+ struct thread_info *tp;
+ int i;
+
+ for_each_possible_cpu(i) {
+ memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
+ tp = softirq_ctx[i];
+ tp->cpu = i;
+ tp->preempt_count = SOFTIRQ_OFFSET;
+
+ memset((void *)hardirq_ctx[i], 0, THREAD_SIZE);
+ tp = hardirq_ctx[i];
+ tp->cpu = i;
+ tp->preempt_count = HARDIRQ_OFFSET;
+ }
+}
+
+static inline void do_softirq_onstack(void)
+{
+ struct thread_info *curtp, *irqtp;
+
+ curtp = current_thread_info();
+ irqtp = softirq_ctx[smp_processor_id()];
+ irqtp->task = curtp->task;
+ call_do_softirq(irqtp);
+ irqtp->task = NULL;
+}
- if (once)
+#else
+#define do_softirq_onstack() __do_softirq()
+#endif /* CONFIG_IRQSTACKS */
+
+void do_softirq(void)
+{
+ unsigned long flags;
+
+ if (in_interrupt())
return;
- once++;
+ local_irq_save(flags);
-#endif
- ppc_md.init_IRQ();
-#ifdef CONFIG_PPC64
- irq_ctx_init();
-#endif
+ if (local_softirq_pending())
+ do_softirq_onstack();
+
+ local_irq_restore(flags);
}
+EXPORT_SYMBOL(do_softirq);
+
-#ifdef CONFIG_PPC64
/*
- * Virtual IRQ mapping code, used on systems with XICS interrupt controllers.
+ * IRQ controller and virtual interrupts
*/
-#define UNDEFINED_IRQ 0xffffffff
-unsigned int virt_irq_to_real_map[NR_IRQS];
+#ifdef CONFIG_PPC_MERGE
-/*
- * Don't use virtual irqs 0, 1, 2 for devices.
- * The pcnet32 driver considers interrupt numbers < 2 to be invalid,
- * and 2 is the XICS IPI interrupt.
- * We limit virtual irqs to __irq_offet_value less than virt_irq_max so
- * that when we offset them we don't end up with an interrupt
- * number >= virt_irq_max.
- */
-#define MIN_VIRT_IRQ 3
+static LIST_HEAD(irq_hosts);
+static spinlock_t irq_big_lock = SPIN_LOCK_UNLOCKED;
-unsigned int virt_irq_max;
-static unsigned int max_virt_irq;
-static unsigned int nr_virt_irqs;
+struct irq_map_entry irq_map[NR_IRQS];
+static unsigned int irq_virq_count = NR_IRQS;
+static struct irq_host *irq_default_host;
-void
-virt_irq_init(void)
+struct irq_host *irq_alloc_host(unsigned int revmap_type,
+ unsigned int revmap_arg,
+ struct irq_host_ops *ops,
+ irq_hw_number_t inval_irq)
{
- int i;
+ struct irq_host *host;
+ unsigned int size = sizeof(struct irq_host);
+ unsigned int i;
+ unsigned int *rmap;
+ unsigned long flags;
+
+ /* Allocate structure and revmap table if using linear mapping */
+ if (revmap_type == IRQ_HOST_MAP_LINEAR)
+ size += revmap_arg * sizeof(unsigned int);
+ if (mem_init_done)
+ host = kzalloc(size, GFP_KERNEL);
+ else {
+ host = alloc_bootmem(size);
+ if (host)
+ memset(host, 0, size);
+ }
+ if (host == NULL)
+ return NULL;
- if ((virt_irq_max == 0) || (virt_irq_max > (NR_IRQS - 1)))
- virt_irq_max = NR_IRQS - 1;
- max_virt_irq = virt_irq_max - __irq_offset_value;
- nr_virt_irqs = max_virt_irq - MIN_VIRT_IRQ + 1;
+ /* Fill structure */
+ host->revmap_type = revmap_type;
+ host->inval_irq = inval_irq;
+ host->ops = ops;
- for (i = 0; i < NR_IRQS; i++)
- virt_irq_to_real_map[i] = UNDEFINED_IRQ;
+ spin_lock_irqsave(&irq_big_lock, flags);
+
+ /* If it's a legacy controller, check for duplicates and
+ * mark it as allocated (we use irq 0 host pointer for that
+ */
+ if (revmap_type == IRQ_HOST_MAP_LEGACY) {
+ if (irq_map[0].host != NULL) {
+ spin_unlock_irqrestore(&irq_big_lock, flags);
+ /* If we are early boot, we can't free the structure,
+ * too bad...
+ * this will be fixed once slab is made available early
+ * instead of the current cruft
+ */
+ if (mem_init_done)
+ kfree(host);
+ return NULL;
+ }
+ irq_map[0].host = host;
+ }
+
+ list_add(&host->link, &irq_hosts);
+ spin_unlock_irqrestore(&irq_big_lock, flags);
+
+ /* Additional setups per revmap type */
+ switch(revmap_type) {
+ case IRQ_HOST_MAP_LEGACY:
+ /* 0 is always the invalid number for legacy */
+ host->inval_irq = 0;
+ /* setup us as the host for all legacy interrupts */
+ for (i = 1; i < NUM_ISA_INTERRUPTS; i++) {
+ irq_map[i].hwirq = 0;
+ smp_wmb();
+ irq_map[i].host = host;
+ smp_wmb();
+
+ /* Clear some flags */
+ get_irq_desc(i)->status
+ &= ~(IRQ_NOREQUEST | IRQ_LEVEL);
+
+ /* Legacy flags are left to default at this point,
+ * one can then use irq_create_mapping() to
+ * explicitely change them
+ */
+ ops->map(host, i, i, 0);
+ }
+ break;
+ case IRQ_HOST_MAP_LINEAR:
+ rmap = (unsigned int *)(host + 1);
+ for (i = 0; i < revmap_arg; i++)
+ rmap[i] = IRQ_NONE;
+ host->revmap_data.linear.size = revmap_arg;
+ smp_wmb();
+ host->revmap_data.linear.revmap = rmap;
+ break;
+ default:
+ break;
+ }
+
+ pr_debug("irq: Allocated host of type %d @0x%p\n", revmap_type, host);
+
+ return host;
}
-/* Create a mapping for a real_irq if it doesn't already exist.
- * Return the virtual irq as a convenience.
- */
-int virt_irq_create_mapping(unsigned int real_irq)
+struct irq_host *irq_find_host(struct device_node *node)
{
- unsigned int virq, first_virq;
- static int warned;
+ struct irq_host *h, *found = NULL;
+ unsigned long flags;
+
+ /* We might want to match the legacy controller last since
+ * it might potentially be set to match all interrupts in
+ * the absence of a device node. This isn't a problem so far
+ * yet though...
+ */
+ spin_lock_irqsave(&irq_big_lock, flags);
+ list_for_each_entry(h, &irq_hosts, link)
+ if (h->ops->match == NULL || h->ops->match(h, node)) {
+ found = h;
+ break;
+ }
+ spin_unlock_irqrestore(&irq_big_lock, flags);
+ return found;
+}
+EXPORT_SYMBOL_GPL(irq_find_host);
+
+void irq_set_default_host(struct irq_host *host)
+{
+ pr_debug("irq: Default host set to @0x%p\n", host);
- if (ppc64_interrupt_controller == IC_OPEN_PIC)
- return real_irq; /* no mapping for openpic (for now) */
+ irq_default_host = host;
+}
- if (ppc64_interrupt_controller == IC_CELL_PIC)
- return real_irq; /* no mapping for iic either */
+void irq_set_virq_count(unsigned int count)
+{
+ pr_debug("irq: Trying to set virq count to %d\n", count);
- /* don't map interrupts < MIN_VIRT_IRQ */
- if (real_irq < MIN_VIRT_IRQ) {
- virt_irq_to_real_map[real_irq] = real_irq;
- return real_irq;
+ BUG_ON(count < NUM_ISA_INTERRUPTS);
+ if (count < NR_IRQS)
+ irq_virq_count = count;
+}
+
+unsigned int irq_create_mapping(struct irq_host *host,
+ irq_hw_number_t hwirq,
+ unsigned int flags)
+{
+ unsigned int virq, hint;
+
+ pr_debug("irq: irq_create_mapping(0x%p, 0x%lx, 0x%x)\n",
+ host, hwirq, flags);
+
+ /* Look for default host if nececssary */
+ if (host == NULL)
+ host = irq_default_host;
+ if (host == NULL) {
+ printk(KERN_WARNING "irq_create_mapping called for"
+ " NULL host, hwirq=%lx\n", hwirq);
+ WARN_ON(1);
+ return NO_IRQ;
}
+ pr_debug("irq: -> using host @%p\n", host);
- /* map to a number between MIN_VIRT_IRQ and max_virt_irq */
- virq = real_irq;
- if (virq > max_virt_irq)
- virq = (virq % nr_virt_irqs) + MIN_VIRT_IRQ;
-
- /* search for this number or a free slot */
- first_virq = virq;
- while (virt_irq_to_real_map[virq] != UNDEFINED_IRQ) {
- if (virt_irq_to_real_map[virq] == real_irq)
- return virq;
- if (++virq > max_virt_irq)
- virq = MIN_VIRT_IRQ;
- if (virq == first_virq)
- goto nospace; /* oops, no free slots */
+ /* Check if mapping already exist, if it does, call
+ * host->ops->map() to update the flags
+ */
+ virq = irq_find_mapping(host, hwirq);
+ if (virq != IRQ_NONE) {
+ pr_debug("irq: -> existing mapping on virq %d\n", virq);
+ host->ops->map(host, virq, hwirq, flags);
+ return virq;
}
- virt_irq_to_real_map[virq] = real_irq;
+ /* Get a virtual interrupt number */
+ if (host->revmap_type == IRQ_HOST_MAP_LEGACY) {
+ /* Handle legacy */
+ virq = (unsigned int)hwirq;
+ if (virq == 0 || virq >= NUM_ISA_INTERRUPTS)
+ return NO_IRQ;
+ return virq;
+ } else {
+ /* Allocate a virtual interrupt number */
+ hint = hwirq % irq_virq_count;
+ virq = irq_alloc_virt(host, 1, hint);
+ if (virq == NO_IRQ) {
+ pr_debug("irq: -> virq allocation failed\n");
+ return NO_IRQ;
+ }
+ }
+ pr_debug("irq: -> obtained virq %d\n", virq);
+
+ /* Clear some flags */
+ get_irq_desc(virq)->status &= ~(IRQ_NOREQUEST | IRQ_LEVEL);
+
+ /* map it */
+ if (host->ops->map(host, virq, hwirq, flags)) {
+ pr_debug("irq: -> mapping failed, freeing\n");
+ irq_free_virt(virq, 1);
+ return NO_IRQ;
+ }
+ smp_wmb();
+ irq_map[virq].hwirq = hwirq;
+ smp_mb();
return virq;
+}
+EXPORT_SYMBOL_GPL(irq_create_mapping);
+
+extern unsigned int irq_create_of_mapping(struct device_node *controller,
+ u32 *intspec, unsigned int intsize)
+{
+ struct irq_host *host;
+ irq_hw_number_t hwirq;
+ unsigned int flags = IRQ_TYPE_NONE;
- nospace:
- if (!warned) {
- printk(KERN_CRIT "Interrupt table is full\n");
- printk(KERN_CRIT "Increase virt_irq_max (currently %d) "
- "in your kernel sources and rebuild.\n", virt_irq_max);
- warned = 1;
+ if (controller == NULL)
+ host = irq_default_host;
+ else
+ host = irq_find_host(controller);
+ if (host == NULL)
+ return NO_IRQ;
+
+ /* If host has no translation, then we assume interrupt line */
+ if (host->ops->xlate == NULL)
+ hwirq = intspec[0];
+ else {
+ if (host->ops->xlate(host, controller, intspec, intsize,
+ &hwirq, &flags))
+ return NO_IRQ;
}
- return NO_IRQ;
+
+ return irq_create_mapping(host, hwirq, flags);
}
+EXPORT_SYMBOL_GPL(irq_create_of_mapping);
-/*
- * In most cases will get a hit on the very first slot checked in the
- * virt_irq_to_real_map. Only when there are a large number of
- * IRQs will this be expensive.
- */
-unsigned int real_irq_to_virt_slowpath(unsigned int real_irq)
+unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
{
- unsigned int virq;
- unsigned int first_virq;
+ struct of_irq oirq;
- virq = real_irq;
+ if (of_irq_map_one(dev, index, &oirq))
+ return NO_IRQ;
- if (virq > max_virt_irq)
- virq = (virq % nr_virt_irqs) + MIN_VIRT_IRQ;
+ return irq_create_of_mapping(oirq.controller, oirq.specifier,
+ oirq.size);
+}
+EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
- first_virq = virq;
+void irq_dispose_mapping(unsigned int virq)
+{
+ struct irq_host *host = irq_map[virq].host;
+ irq_hw_number_t hwirq;
+ unsigned long flags;
- do {
- if (virt_irq_to_real_map[virq] == real_irq)
- return virq;
+ WARN_ON (host == NULL);
+ if (host == NULL)
+ return;
- virq++;
+ /* Never unmap legacy interrupts */
+ if (host->revmap_type == IRQ_HOST_MAP_LEGACY)
+ return;
- if (virq >= max_virt_irq)
- virq = 0;
+ /* remove chip and handler */
+ set_irq_chip_and_handler(virq, NULL, NULL);
+
+ /* Make sure it's completed */
+ synchronize_irq(virq);
+
+ /* Tell the PIC about it */
+ if (host->ops->unmap)
+ host->ops->unmap(host, virq);
+ smp_mb();
+
+ /* Clear reverse map */
+ hwirq = irq_map[virq].hwirq;
+ switch(host->revmap_type) {
+ case IRQ_HOST_MAP_LINEAR:
+ if (hwirq < host->revmap_data.linear.size)
+ host->revmap_data.linear.revmap[hwirq] = IRQ_NONE;
+ break;
+ case IRQ_HOST_MAP_TREE:
+ /* Check if radix tree allocated yet */
+ if (host->revmap_data.tree.gfp_mask == 0)
+ break;
+ /* XXX radix tree not safe ! remove lock whem it becomes safe
+ * and use some RCU sync to make sure everything is ok before we
+ * can re-use that map entry
+ */
+ spin_lock_irqsave(&irq_big_lock, flags);
+ radix_tree_delete(&host->revmap_data.tree, hwirq);
+ spin_unlock_irqrestore(&irq_big_lock, flags);
+ break;
+ }
- } while (first_virq != virq);
+ /* Destroy map */
+ smp_mb();
+ irq_map[virq].hwirq = host->inval_irq;
- return NO_IRQ;
+ /* Set some flags */
+ get_irq_desc(virq)->status |= IRQ_NOREQUEST;
+ /* Free it */
+ irq_free_virt(virq, 1);
}
-#endif /* CONFIG_PPC64 */
+EXPORT_SYMBOL_GPL(irq_dispose_mapping);
-#ifdef CONFIG_IRQSTACKS
-struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
-struct thread_info *hardirq_ctx[NR_CPUS] __read_mostly;
+unsigned int irq_find_mapping(struct irq_host *host,
+ irq_hw_number_t hwirq)
+{
+ unsigned int i;
+ unsigned int hint = hwirq % irq_virq_count;
+
+ /* Look for default host if nececssary */
+ if (host == NULL)
+ host = irq_default_host;
+ if (host == NULL)
+ return NO_IRQ;
+
+ /* legacy -> bail early */
+ if (host->revmap_type == IRQ_HOST_MAP_LEGACY)
+ return hwirq;
+
+ /* Slow path does a linear search of the map */
+ if (hint < NUM_ISA_INTERRUPTS)
+ hint = NUM_ISA_INTERRUPTS;
+ i = hint;
+ do {
+ if (irq_map[i].host == host &&
+ irq_map[i].hwirq == hwirq)
+ return i;
+ i++;
+ if (i >= irq_virq_count)
+ i = NUM_ISA_INTERRUPTS;
+ } while(i != hint);
+ return NO_IRQ;
+}
+EXPORT_SYMBOL_GPL(irq_find_mapping);
-void irq_ctx_init(void)
+
+unsigned int irq_radix_revmap(struct irq_host *host,
+ irq_hw_number_t hwirq)
{
- struct thread_info *tp;
- int i;
+ struct radix_tree_root *tree;
+ struct irq_map_entry *ptr;
+ unsigned int virq;
+ unsigned long flags;
- for_each_possible_cpu(i) {
- memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
- tp = softirq_ctx[i];
- tp->cpu = i;
- tp->preempt_count = SOFTIRQ_OFFSET;
+ WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE);
- memset((void *)hardirq_ctx[i], 0, THREAD_SIZE);
- tp = hardirq_ctx[i];
- tp->cpu = i;
- tp->preempt_count = HARDIRQ_OFFSET;
+ /* Check if the radix tree exist yet. We test the value of
+ * the gfp_mask for that. Sneaky but saves another int in the
+ * structure. If not, we fallback to slow mode
+ */
+ tree = &host->revmap_data.tree;
+ if (tree->gfp_mask == 0)
+ return irq_find_mapping(host, hwirq);
+
+ /* XXX Current radix trees are NOT SMP safe !!! Remove that lock
+ * when that is fixed (when Nick's patch gets in
+ */
+ spin_lock_irqsave(&irq_big_lock, flags);
+
+ /* Now try to resolve */
+ ptr = radix_tree_lookup(tree, hwirq);
+ /* Found it, return */
+ if (ptr) {
+ virq = ptr - irq_map;
+ goto bail;
}
+
+ /* If not there, try to insert it */
+ virq = irq_find_mapping(host, hwirq);
+ if (virq != NO_IRQ)
+ radix_tree_insert(tree, virq, &irq_map[virq]);
+ bail:
+ spin_unlock_irqrestore(&irq_big_lock, flags);
+ return virq;
}
-static inline void do_softirq_onstack(void)
+unsigned int irq_linear_revmap(struct irq_host *host,
+ irq_hw_number_t hwirq)
{
- struct thread_info *curtp, *irqtp;
+ unsigned int *revmap;
- curtp = current_thread_info();
- irqtp = softirq_ctx[smp_processor_id()];
- irqtp->task = curtp->task;
- call_do_softirq(irqtp);
- irqtp->task = NULL;
+ WARN_ON(host->revmap_type != IRQ_HOST_MAP_LINEAR);
+
+ /* Check revmap bounds */
+ if (unlikely(hwirq >= host->revmap_data.linear.size))
+ return irq_find_mapping(host, hwirq);
+
+ /* Check if revmap was allocated */
+ revmap = host->revmap_data.linear.revmap;
+ if (unlikely(revmap == NULL))
+ return irq_find_mapping(host, hwirq);
+
+ /* Fill up revmap with slow path if no mapping found */
+ if (unlikely(revmap[hwirq] == NO_IRQ))
+ revmap[hwirq] = irq_find_mapping(host, hwirq);
+
+ return revmap[hwirq];
}
-#else
-#define do_softirq_onstack() __do_softirq()
-#endif /* CONFIG_IRQSTACKS */
+unsigned int irq_alloc_virt(struct irq_host *host,
+ unsigned int count,
+ unsigned int hint)
+{
+ unsigned long flags;
+ unsigned int i, j, found = NO_IRQ;
+ unsigned int limit = irq_virq_count - count;
-void do_softirq(void)
+ if (count == 0 || count > (irq_virq_count - NUM_ISA_INTERRUPTS))
+ return NO_IRQ;
+
+ spin_lock_irqsave(&irq_big_lock, flags);
+
+ /* Use hint for 1 interrupt if any */
+ if (count == 1 && hint >= NUM_ISA_INTERRUPTS &&
+ hint < irq_virq_count && irq_map[hint].host == NULL) {
+ found = hint;
+ goto hint_found;
+ }
+
+ /* Look for count consecutive numbers in the allocatable
+ * (non-legacy) space
+ */
+ for (i = NUM_ISA_INTERRUPTS; i <= limit; ) {
+ for (j = i; j < (i + count); j++)
+ if (irq_map[j].host != NULL) {
+ i = j + 1;
+ continue;
+ }
+ found = i;
+ break;
+ }
+ if (found == NO_IRQ) {
+ spin_unlock_irqrestore(&irq_big_lock, flags);
+ return NO_IRQ;
+ }
+ hint_found:
+ for (i = found; i < (found + count); i++) {
+ irq_map[i].hwirq = host->inval_irq;
+ smp_wmb();
+ irq_map[i].host = host;
+ }
+ spin_unlock_irqrestore(&irq_big_lock, flags);
+ return found;
+}
+
+void irq_free_virt(unsigned int virq, unsigned int count)
{
unsigned long flags;
+ unsigned int i;
- if (in_interrupt())
- return;
+ WARN_ON (virq < NUM_ISA_INTERRUPTS);
+ WARN_ON (count == 0 || (virq + count) > irq_virq_count);
- local_irq_save(flags);
+ spin_lock_irqsave(&irq_big_lock, flags);
+ for (i = virq; i < (virq + count); i++) {
+ struct irq_host *host;
- if (local_softirq_pending())
- do_softirq_onstack();
+ if (i < NUM_ISA_INTERRUPTS ||
+ (virq + count) > irq_virq_count)
+ continue;
- local_irq_restore(flags);
+ host = irq_map[i].host;
+ irq_map[i].hwirq = host->inval_irq;
+ smp_wmb();
+ irq_map[i].host = NULL;
+ }
+ spin_unlock_irqrestore(&irq_big_lock, flags);
}
-EXPORT_SYMBOL(do_softirq);
+
+void irq_early_init(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < NR_IRQS; i++)
+ get_irq_desc(i)->status |= IRQ_NOREQUEST;
+}
+
+/* We need to create the radix trees late */
+static int irq_late_init(void)
+{
+ struct irq_host *h;
+ unsigned long flags;
+
+ spin_lock_irqsave(&irq_big_lock, flags);
+ list_for_each_entry(h, &irq_hosts, link) {
+ if (h->revmap_type == IRQ_HOST_MAP_TREE)
+ INIT_RADIX_TREE(&h->revmap_data.tree, GFP_ATOMIC);
+ }
+ spin_unlock_irqrestore(&irq_big_lock, flags);
+
+ return 0;
+}
+arch_initcall(irq_late_init);
+
+#endif /* CONFIG_PPC_MERGE */
#ifdef CONFIG_PCI_MSI
int pci_enable_msi(struct pci_dev * pdev)
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 4cf0b971976b..7e98e778b52f 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -28,6 +28,7 @@ static struct legacy_serial_info {
struct device_node *np;
unsigned int speed;
unsigned int clock;
+ int irq_check_parent;
phys_addr_t taddr;
} legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
static unsigned int legacy_serial_count;
@@ -36,7 +37,7 @@ static int legacy_serial_console = -1;
static int __init add_legacy_port(struct device_node *np, int want_index,
int iotype, phys_addr_t base,
phys_addr_t taddr, unsigned long irq,
- upf_t flags)
+ upf_t flags, int irq_check_parent)
{
u32 *clk, *spd, clock = BASE_BAUD * 16;
int index;
@@ -68,7 +69,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
if (legacy_serial_infos[index].np != 0) {
/* if we still have some room, move it, else override */
if (legacy_serial_count < MAX_LEGACY_SERIAL_PORTS) {
- printk(KERN_INFO "Moved legacy port %d -> %d\n",
+ printk(KERN_DEBUG "Moved legacy port %d -> %d\n",
index, legacy_serial_count);
legacy_serial_ports[legacy_serial_count] =
legacy_serial_ports[index];
@@ -76,7 +77,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
legacy_serial_infos[index];
legacy_serial_count++;
} else {
- printk(KERN_INFO "Replacing legacy port %d\n", index);
+ printk(KERN_DEBUG "Replacing legacy port %d\n", index);
}
}
@@ -95,10 +96,11 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
legacy_serial_infos[index].np = of_node_get(np);
legacy_serial_infos[index].clock = clock;
legacy_serial_infos[index].speed = spd ? *spd : 0;
+ legacy_serial_infos[index].irq_check_parent = irq_check_parent;
- printk(KERN_INFO "Found legacy serial port %d for %s\n",
+ printk(KERN_DEBUG "Found legacy serial port %d for %s\n",
index, np->full_name);
- printk(KERN_INFO " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
+ printk(KERN_DEBUG " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
(iotype == UPIO_PORT) ? "port" : "mem",
(unsigned long long)base, (unsigned long long)taddr, irq,
legacy_serial_ports[index].uartclk,
@@ -126,11 +128,13 @@ static int __init add_legacy_soc_port(struct device_node *np,
return -1;
addr = of_translate_address(soc_dev, addrp);
+ if (addr == OF_BAD_ADDR)
+ return -1;
/* Add port, irq will be dealt with later. We passed a translated
* IO port value. It will be fixed up later along with the irq
*/
- return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags);
+ return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
}
static int __init add_legacy_isa_port(struct device_node *np,
@@ -141,6 +145,8 @@ static int __init add_legacy_isa_port(struct device_node *np,
int index = -1;
phys_addr_t taddr;
+ DBG(" -> add_legacy_isa_port(%s)\n", np->full_name);
+
/* Get the ISA port number */
reg = (u32 *)get_property(np, "reg", NULL);
if (reg == NULL)
@@ -161,9 +167,12 @@ static int __init add_legacy_isa_port(struct device_node *np,
/* Translate ISA address */
taddr = of_translate_address(np, reg);
+ if (taddr == OF_BAD_ADDR)
+ return -1;
/* Add port, irq will be dealt with later */
- return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, NO_IRQ, UPF_BOOT_AUTOCONF);
+ return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr,
+ NO_IRQ, UPF_BOOT_AUTOCONF, 0);
}
@@ -176,6 +185,8 @@ static int __init add_legacy_pci_port(struct device_node *np,
unsigned int flags;
int iotype, index = -1, lindex = 0;
+ DBG(" -> add_legacy_pci_port(%s)\n", np->full_name);
+
/* We only support ports that have a clock frequency properly
* encoded in the device-tree (that is have an fcode). Anything
* else can't be used that early and will be normally probed by
@@ -194,6 +205,8 @@ static int __init add_legacy_pci_port(struct device_node *np,
/* We only support BAR 0 for now */
iotype = (flags & IORESOURCE_MEM) ? UPIO_MEM : UPIO_PORT;
addr = of_translate_address(pci_dev, addrp);
+ if (addr == OF_BAD_ADDR)
+ return -1;
/* Set the IO base to the same as the translated address for MMIO,
* or to the domain local IO base for PIO (it will be fixed up later)
@@ -231,7 +244,8 @@ static int __init add_legacy_pci_port(struct device_node *np,
/* Add port, irq will be dealt with later. We passed a translated
* IO port value. It will be fixed up later along with the irq
*/
- return add_legacy_port(np, index, iotype, base, addr, NO_IRQ, UPF_BOOT_AUTOCONF);
+ return add_legacy_port(np, index, iotype, base, addr, NO_IRQ,
+ UPF_BOOT_AUTOCONF, np != pci_dev);
}
#endif
@@ -362,27 +376,22 @@ static void __init fixup_port_irq(int index,
struct device_node *np,
struct plat_serial8250_port *port)
{
+ unsigned int virq;
+
DBG("fixup_port_irq(%d)\n", index);
- /* Check for interrupts in that node */
- if (np->n_intrs > 0) {
- port->irq = np->intrs[0].line;
- DBG(" port %d (%s), irq=%d\n",
- index, np->full_name, port->irq);
- return;
+ virq = irq_of_parse_and_map(np, 0);
+ if (virq == NO_IRQ && legacy_serial_infos[index].irq_check_parent) {
+ np = of_get_parent(np);
+ if (np == NULL)
+ return;
+ virq = irq_of_parse_and_map(np, 0);
+ of_node_put(np);
}
-
- /* Check for interrupts in the parent */
- np = of_get_parent(np);
- if (np == NULL)
+ if (virq == NO_IRQ)
return;
- if (np->n_intrs > 0) {
- port->irq = np->intrs[0].line;
- DBG(" port %d (%s), irq=%d\n",
- index, np->full_name, port->irq);
- }
- of_node_put(np);
+ port->irq = virq;
}
static void __init fixup_port_pio(int index,
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 0c3c70d115c6..bfb407fc1aa1 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -51,12 +51,14 @@ _GLOBAL(call_do_softirq)
mtlr r0
blr
-_GLOBAL(call___do_IRQ)
+_GLOBAL(call_handle_irq)
+ ld r8,0(r7)
mflr r0
std r0,16(r1)
- stdu r1,THREAD_SIZE-112(r5)
- mr r1,r5
- bl .__do_IRQ
+ mtctr r8
+ stdu r1,THREAD_SIZE-112(r6)
+ mr r1,r6
+ bctrl
ld r1,0(r1)
ld r0,16(r1)
mtlr r0
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 1333335c474e..898dae8ab6d9 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -1404,6 +1404,43 @@ pcibios_update_irq(struct pci_dev *dev, int irq)
/* XXX FIXME - update OF device tree node interrupt property */
}
+#ifdef CONFIG_PPC_MERGE
+/* XXX This is a copy of the ppc64 version. This is temporary until we start
+ * merging the 2 PCI layers
+ */
+/*
+ * Reads the interrupt pin to determine if interrupt is use by card.
+ * If the interrupt is used, then gets the interrupt line from the
+ * openfirmware and sets it in the pci_dev and pci_config line.
+ */
+int pci_read_irq_line(struct pci_dev *pci_dev)
+{
+ struct of_irq oirq;
+ unsigned int virq;
+
+ DBG("Try to map irq for %s...\n", pci_name(pci_dev));
+
+ if (of_irq_map_pci(pci_dev, &oirq)) {
+ DBG(" -> failed !\n");
+ return -1;
+ }
+
+ DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
+ oirq.size, oirq.specifier[0], oirq.controller->full_name);
+
+ virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size);
+ if(virq == NO_IRQ) {
+ DBG(" -> failed to map !\n");
+ return -1;
+ }
+ pci_dev->irq = virq;
+ pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, virq);
+
+ return 0;
+}
+EXPORT_SYMBOL(pci_read_irq_line);
+#endif /* CONFIG_PPC_MERGE */
+
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
u16 cmd, old_cmd;
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index bea8451fb57b..efc0b5559ee0 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -398,12 +398,8 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
} else {
dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
dev->rom_base_reg = PCI_ROM_ADDRESS;
+ /* Maybe do a default OF mapping here */
dev->irq = NO_IRQ;
- if (node->n_intrs > 0) {
- dev->irq = node->intrs[0].line;
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
- dev->irq);
- }
}
pci_parse_of_addrs(node, dev);
@@ -1288,23 +1284,26 @@ EXPORT_SYMBOL(pcibios_fixup_bus);
*/
int pci_read_irq_line(struct pci_dev *pci_dev)
{
- u8 intpin;
- struct device_node *node;
-
- pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &intpin);
- if (intpin == 0)
- return 0;
+ struct of_irq oirq;
+ unsigned int virq;
- node = pci_device_to_OF_node(pci_dev);
- if (node == NULL)
- return -1;
+ DBG("Try to map irq for %s...\n", pci_name(pci_dev));
- if (node->n_intrs == 0)
+ if (of_irq_map_pci(pci_dev, &oirq)) {
+ DBG(" -> failed !\n");
return -1;
+ }
- pci_dev->irq = node->intrs[0].line;
+ DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
+ oirq.size, oirq.specifier[0], oirq.controller->full_name);
- pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, pci_dev->irq);
+ virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size);
+ if(virq == NO_IRQ) {
+ DBG(" -> failed to map !\n");
+ return -1;
+ }
+ pci_dev->irq = virq;
+ pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, virq);
return 0;
}
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 4c524cb52184..a1787ffb6319 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -30,6 +30,7 @@
#include <linux/module.h>
#include <linux/kexec.h>
#include <linux/debugfs.h>
+#include <linux/irq.h>
#include <asm/prom.h>
#include <asm/rtas.h>
@@ -86,424 +87,6 @@ static DEFINE_RWLOCK(devtree_lock);
/* export that to outside world */
struct device_node *of_chosen;
-struct device_node *dflt_interrupt_controller;
-int num_interrupt_controllers;
-
-/*
- * Wrapper for allocating memory for various data that needs to be
- * attached to device nodes as they are processed at boot or when
- * added to the device tree later (e.g. DLPAR). At boot there is
- * already a region reserved so we just increment *mem_start by size;
- * otherwise we call kmalloc.
- */
-static void * prom_alloc(unsigned long size, unsigned long *mem_start)
-{
- unsigned long tmp;
-
- if (!mem_start)
- return kmalloc(size, GFP_KERNEL);
-
- tmp = *mem_start;
- *mem_start += size;
- return (void *)tmp;
-}
-
-/*
- * Find the device_node with a given phandle.
- */
-static struct device_node * find_phandle(phandle ph)
-{
- struct device_node *np;
-
- for (np = allnodes; np != 0; np = np->allnext)
- if (np->linux_phandle == ph)
- return np;
- return NULL;
-}
-
-/*
- * Find the interrupt parent of a node.
- */
-static struct device_node * __devinit intr_parent(struct device_node *p)
-{
- phandle *parp;
-
- parp = (phandle *) get_property(p, "interrupt-parent", NULL);
- if (parp == NULL)
- return p->parent;
- p = find_phandle(*parp);
- if (p != NULL)
- return p;
- /*
- * On a powermac booted with BootX, we don't get to know the
- * phandles for any nodes, so find_phandle will return NULL.
- * Fortunately these machines only have one interrupt controller
- * so there isn't in fact any ambiguity. -- paulus
- */
- if (num_interrupt_controllers == 1)
- p = dflt_interrupt_controller;
- return p;
-}
-
-/*
- * Find out the size of each entry of the interrupts property
- * for a node.
- */
-int __devinit prom_n_intr_cells(struct device_node *np)
-{
- struct device_node *p;
- unsigned int *icp;
-
- for (p = np; (p = intr_parent(p)) != NULL; ) {
- icp = (unsigned int *)
- get_property(p, "#interrupt-cells", NULL);
- if (icp != NULL)
- return *icp;
- if (get_property(p, "interrupt-controller", NULL) != NULL
- || get_property(p, "interrupt-map", NULL) != NULL) {
- printk("oops, node %s doesn't have #interrupt-cells\n",
- p->full_name);
- return 1;
- }
- }
-#ifdef DEBUG_IRQ
- printk("prom_n_intr_cells failed for %s\n", np->full_name);
-#endif
- return 1;
-}
-
-/*
- * Map an interrupt from a device up to the platform interrupt
- * descriptor.
- */
-static int __devinit map_interrupt(unsigned int **irq, struct device_node **ictrler,
- struct device_node *np, unsigned int *ints,
- int nintrc)
-{
- struct device_node *p, *ipar;
- unsigned int *imap, *imask, *ip;
- int i, imaplen, match;
- int newintrc = 0, newaddrc = 0;
- unsigned int *reg;
- int naddrc;
-
- reg = (unsigned int *) get_property(np, "reg", NULL);
- naddrc = prom_n_addr_cells(np);
- p = intr_parent(np);
- while (p != NULL) {
- if (get_property(p, "interrupt-controller", NULL) != NULL)
- /* this node is an interrupt controller, stop here */
- break;
- imap = (unsigned int *)
- get_property(p, "interrupt-map", &imaplen);
- if (imap == NULL) {
- p = intr_parent(p);
- continue;
- }
- imask = (unsigned int *)
- get_property(p, "interrupt-map-mask", NULL);
- if (imask == NULL) {
- printk("oops, %s has interrupt-map but no mask\n",
- p->full_name);
- return 0;
- }
- imaplen /= sizeof(unsigned int);
- match = 0;
- ipar = NULL;
- while (imaplen > 0 && !match) {
- /* check the child-interrupt field */
- match = 1;
- for (i = 0; i < naddrc && match; ++i)
- match = ((reg[i] ^ imap[i]) & imask[i]) == 0;
- for (; i < naddrc + nintrc && match; ++i)
- match = ((ints[i-naddrc] ^ imap[i]) & imask[i]) == 0;
- imap += naddrc + nintrc;
- imaplen -= naddrc + nintrc;
- /* grab the interrupt parent */
- ipar = find_phandle((phandle) *imap++);
- --imaplen;
- if (ipar == NULL && num_interrupt_controllers == 1)
- /* cope with BootX not giving us phandles */
- ipar = dflt_interrupt_controller;
- if (ipar == NULL) {
- printk("oops, no int parent %x in map of %s\n",
- imap[-1], p->full_name);
- return 0;
- }
- /* find the parent's # addr and intr cells */
- ip = (unsigned int *)
- get_property(ipar, "#interrupt-cells", NULL);
- if (ip == NULL) {
- printk("oops, no #interrupt-cells on %s\n",
- ipar->full_name);
- return 0;
- }
- newintrc = *ip;
- ip = (unsigned int *)
- get_property(ipar, "#address-cells", NULL);
- newaddrc = (ip == NULL)? 0: *ip;
- imap += newaddrc + newintrc;
- imaplen -= newaddrc + newintrc;
- }
- if (imaplen < 0) {
- printk("oops, error decoding int-map on %s, len=%d\n",
- p->full_name, imaplen);
- return 0;
- }
- if (!match) {
-#ifdef DEBUG_IRQ
- printk("oops, no match in %s int-map for %s\n",
- p->full_name, np->full_name);
-#endif
- return 0;
- }
- p = ipar;
- naddrc = newaddrc;
- nintrc = newintrc;
- ints = imap - nintrc;
- reg = ints - naddrc;
- }
- if (p == NULL) {
-#ifdef DEBUG_IRQ
- printk("hmmm, int tree for %s doesn't have ctrler\n",
- np->full_name);
-#endif
- return 0;
- }
- *irq = ints;
- *ictrler = p;
- return nintrc;
-}
-
-static unsigned char map_isa_senses[4] = {
- IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE,
- IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE,
- IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE,
- IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE
-};
-
-static unsigned char map_mpic_senses[4] = {
- IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE,
- IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE,
- /* 2 seems to be used for the 8259 cascade... */
- IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE,
- IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE,
-};
-
-static int __devinit finish_node_interrupts(struct device_node *np,
- unsigned long *mem_start,
- int measure_only)
-{
- unsigned int *ints;
- int intlen, intrcells, intrcount;
- int i, j, n, sense;
- unsigned int *irq, virq;
- struct device_node *ic;
- int trace = 0;
-
- //#define TRACE(fmt...) do { if (trace) { printk(fmt); mdelay(1000); } } while(0)
-#define TRACE(fmt...)
-
- if (!strcmp(np->name, "smu-doorbell"))
- trace = 1;
-
- TRACE("Finishing SMU doorbell ! num_interrupt_controllers = %d\n",
- num_interrupt_controllers);
-
- if (num_interrupt_controllers == 0) {
- /*
- * Old machines just have a list of interrupt numbers
- * and no interrupt-controller nodes.
- */
- ints = (unsigned int *) get_property(np, "AAPL,interrupts",
- &intlen);
- /* XXX old interpret_pci_props looked in parent too */
- /* XXX old interpret_macio_props looked for interrupts
- before AAPL,interrupts */
- if (ints == NULL)
- ints = (unsigned int *) get_property(np, "interrupts",
- &intlen);
- if (ints == NULL)
- return 0;
-
- np->n_intrs = intlen / sizeof(unsigned int);
- np->intrs = prom_alloc(np->n_intrs * sizeof(np->intrs[0]),
- mem_start);
- if (!np->intrs)
- return -ENOMEM;
- if (measure_only)
- return 0;
-
- for (i = 0; i < np->n_intrs; ++i) {
- np->intrs[i].line = *ints++;
- np->intrs[i].sense = IRQ_SENSE_LEVEL
- | IRQ_POLARITY_NEGATIVE;
- }
- return 0;
- }
-
- ints = (unsigned int *) get_property(np, "interrupts", &intlen);
- TRACE("ints=%p, intlen=%d\n", ints, intlen);
- if (ints == NULL)
- return 0;
- intrcells = prom_n_intr_cells(np);
- intlen /= intrcells * sizeof(unsigned int);
- TRACE("intrcells=%d, new intlen=%d\n", intrcells, intlen);
- np->intrs = prom_alloc(intlen * sizeof(*(np->intrs)), mem_start);
- if (!np->intrs)
- return -ENOMEM;
-
- if (measure_only)
- return 0;
-
- intrcount = 0;
- for (i = 0; i < intlen; ++i, ints += intrcells) {
- n = map_interrupt(&irq, &ic, np, ints, intrcells);
- TRACE("map, irq=%d, ic=%p, n=%d\n", irq, ic, n);
- if (n <= 0)
- continue;
-
- /* don't map IRQ numbers under a cascaded 8259 controller */
- if (ic && device_is_compatible(ic, "chrp,iic")) {
- np->intrs[intrcount].line = irq[0];
- sense = (n > 1)? (irq[1] & 3): 3;
- np->intrs[intrcount].sense = map_isa_senses[sense];
- } else {
- virq = virt_irq_create_mapping(irq[0]);
- TRACE("virq=%d\n", virq);
-#ifdef CONFIG_PPC64
- if (virq == NO_IRQ) {
- printk(KERN_CRIT "Could not allocate interrupt"
- " number for %s\n", np->full_name);
- continue;
- }
-#endif
- np->intrs[intrcount].line = irq_offset_up(virq);
- sense = (n > 1)? (irq[1] & 3): 1;
-
- /* Apple uses bits in there in a different way, let's
- * only keep the real sense bit on macs
- */
- if (machine_is(powermac))
- sense &= 0x1;
- np->intrs[intrcount].sense = map_mpic_senses[sense];
- }
-
-#ifdef CONFIG_PPC64
- /* We offset irq numbers for the u3 MPIC by 128 in PowerMac */
- if (machine_is(powermac) && ic && ic->parent) {
- char *name = get_property(ic->parent, "name", NULL);
- if (name && !strcmp(name, "u3"))
- np->intrs[intrcount].line += 128;
- else if (!(name && (!strcmp(name, "mac-io") ||
- !strcmp(name, "u4"))))
- /* ignore other cascaded controllers, such as
- the k2-sata-root */
- break;
- }
-#endif /* CONFIG_PPC64 */
- if (n > 2) {
- printk("hmmm, got %d intr cells for %s:", n,
- np->full_name);
- for (j = 0; j < n; ++j)
- printk(" %d", irq[j]);
- printk("\n");
- }
- ++intrcount;
- }
- np->n_intrs = intrcount;
-
- return 0;
-}
-
-static int __devinit finish_node(struct device_node *np,
- unsigned long *mem_start,
- int measure_only)
-{
- struct device_node *child;
- int rc = 0;
-
- rc = finish_node_interrupts(np, mem_start, measure_only);
- if (rc)
- goto out;
-
- for (child = np->child; child != NULL; child = child->sibling) {
- rc = finish_node(child, mem_start, measure_only);
- if (rc)
- goto out;
- }
-out:
- return rc;
-}
-
-static void __init scan_interrupt_controllers(void)
-{
- struct device_node *np;
- int n = 0;
- char *name, *ic;
- int iclen;
-
- for (np = allnodes; np != NULL; np = np->allnext) {
- ic = get_property(np, "interrupt-controller", &iclen);
- name = get_property(np, "name", NULL);
- /* checking iclen makes sure we don't get a false
- match on /chosen.interrupt_controller */
- if ((name != NULL
- && strcmp(name, "interrupt-controller") == 0)
- || (ic != NULL && iclen == 0
- && strcmp(name, "AppleKiwi"))) {
- if (n == 0)
- dflt_interrupt_controller = np;
- ++n;
- }
- }
- num_interrupt_controllers = n;
-}
-
-/**
- * finish_device_tree is called once things are running normally
- * (i.e. with text and data mapped to the address they were linked at).
- * It traverses the device tree and fills in some of the additional,
- * fields in each node like {n_}addrs and {n_}intrs, the virt interrupt
- * mapping is also initialized at this point.
- */
-void __init finish_device_tree(void)
-{
- unsigned long start, end, size = 0;
-
- DBG(" -> finish_device_tree\n");
-
-#ifdef CONFIG_PPC64
- /* Initialize virtual IRQ map */
- virt_irq_init();
-#endif
- scan_interrupt_controllers();
-
- /*
- * Finish device-tree (pre-parsing some properties etc...)
- * We do this in 2 passes. One with "measure_only" set, which
- * will only measure the amount of memory needed, then we can
- * allocate that memory, and call finish_node again. However,
- * we must be careful as most routines will fail nowadays when
- * prom_alloc() returns 0, so we must make sure our first pass
- * doesn't start at 0. We pre-initialize size to 16 for that
- * reason and then remove those additional 16 bytes
- */
- size = 16;
- finish_node(allnodes, &size, 1);
- size -= 16;
-
- if (0 == size)
- end = start = 0;
- else
- end = start = (unsigned long)__va(lmb_alloc(size, 128));
-
- finish_node(allnodes, &end, 0);
- BUG_ON(end != start + size);
-
- DBG(" <- finish_device_tree\n");
-}
-
static inline char *find_flat_dt_string(u32 offset)
{
return ((char *)initial_boot_params) +
@@ -1389,27 +972,6 @@ prom_n_size_cells(struct device_node* np)
EXPORT_SYMBOL(prom_n_size_cells);
/**
- * Work out the sense (active-low level / active-high edge)
- * of each interrupt from the device tree.
- */
-void __init prom_get_irq_senses(unsigned char *senses, int off, int max)
-{
- struct device_node *np;
- int i, j;
-
- /* default to level-triggered */
- memset(senses, IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE, max - off);
-
- for (np = allnodes; np != 0; np = np->allnext) {
- for (j = 0; j < np->n_intrs; j++) {
- i = np->intrs[j].line;
- if (i >= off && i < max)
- senses[i-off] = np->intrs[j].sense;
- }
- }
-}
-
-/**
* Construct and return a list of the device_nodes with a given name.
*/
struct device_node *find_devices(const char *name)
@@ -1808,7 +1370,6 @@ static void of_node_release(struct kref *kref)
node->deadprops = NULL;
}
}
- kfree(node->intrs);
kfree(node->full_name);
kfree(node->data);
kfree(node);
@@ -1881,13 +1442,7 @@ void of_detach_node(const struct device_node *np)
#ifdef CONFIG_PPC_PSERIES
/*
* Fix up the uninitialized fields in a new device node:
- * name, type, n_addrs, addrs, n_intrs, intrs, and pci-specific fields
- *
- * A lot of boot-time code is duplicated here, because functions such
- * as finish_node_interrupts, interpret_pci_props, etc. cannot use the
- * slab allocator.
- *
- * This should probably be split up into smaller chunks.
+ * name, type and pci-specific fields
*/
static int of_finish_dynamic_node(struct device_node *node)
@@ -1928,8 +1483,6 @@ static int prom_reconfig_notifier(struct notifier_block *nb,
switch (action) {
case PSERIES_RECONFIG_ADD:
err = of_finish_dynamic_node(node);
- if (!err)
- finish_node(node, NULL, 0);
if (err < 0) {
printk(KERN_ERR "finish_node returned %d\n", err);
err = NOTIFY_BAD;
@@ -1975,8 +1528,7 @@ struct property *of_find_property(struct device_node *np, const char *name,
* Find a property with a given name for a given node
* and return the value.
*/
-unsigned char *get_property(struct device_node *np, const char *name,
- int *lenp)
+void *get_property(struct device_node *np, const char *name, int *lenp)
{
struct property *pp = of_find_property(np,name,lenp);
return pp ? pp->value : NULL;
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 1e95a9f8cda1..ebd501a59abd 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1990,12 +1990,22 @@ static void __init flatten_device_tree(void)
static void __init fixup_device_tree_maple(void)
{
phandle isa;
+ u32 rloc = 0x01002000; /* IO space; PCI device = 4 */
u32 isa_ranges[6];
-
- isa = call_prom("finddevice", 1, 1, ADDR("/ht@0/isa@4"));
+ char *name;
+
+ name = "/ht@0/isa@4";
+ isa = call_prom("finddevice", 1, 1, ADDR(name));
+ if (!PHANDLE_VALID(isa)) {
+ name = "/ht@0/isa@6";
+ isa = call_prom("finddevice", 1, 1, ADDR(name));
+ rloc = 0x01003000; /* IO space; PCI device = 6 */
+ }
if (!PHANDLE_VALID(isa))
return;
+ if (prom_getproplen(isa, "ranges") != 12)
+ return;
if (prom_getprop(isa, "ranges", isa_ranges, sizeof(isa_ranges))
== PROM_ERROR)
return;
@@ -2005,15 +2015,15 @@ static void __init fixup_device_tree_maple(void)
isa_ranges[2] != 0x00010000)
return;
- prom_printf("fixing up bogus ISA range on Maple...\n");
+ prom_printf("Fixing up bogus ISA range on Maple/Apache...\n");
isa_ranges[0] = 0x1;
isa_ranges[1] = 0x0;
- isa_ranges[2] = 0x01002000; /* IO space; PCI device = 4 */
+ isa_ranges[2] = rloc;
isa_ranges[3] = 0x0;
isa_ranges[4] = 0x0;
isa_ranges[5] = 0x00010000;
- prom_setprop(isa, "/ht@0/isa@4", "ranges",
+ prom_setprop(isa, name, "ranges",
isa_ranges, sizeof(isa_ranges));
}
#else
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 45df420383cc..21009b1f7869 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -38,14 +38,6 @@ static void of_dump_addr(const char *s, u32 *addr, int na)
static void of_dump_addr(const char *s, u32 *addr, int na) { }
#endif
-/* Read a big address */
-static inline u64 of_read_addr(u32 *cell, int size)
-{
- u64 r = 0;
- while (size--)
- r = (r << 32) | *(cell++);
- return r;
-}
/* Callbacks for bus specific translators */
struct of_bus {
@@ -77,9 +69,9 @@ static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna)
{
u64 cp, s, da;
- cp = of_read_addr(range, na);
- s = of_read_addr(range + na + pna, ns);
- da = of_read_addr(addr, na);
+ cp = of_read_number(range, na);
+ s = of_read_number(range + na + pna, ns);
+ da = of_read_number(addr, na);
DBG("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n",
cp, s, da);
@@ -91,7 +83,7 @@ static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna)
static int of_bus_default_translate(u32 *addr, u64 offset, int na)
{
- u64 a = of_read_addr(addr, na);
+ u64 a = of_read_number(addr, na);
memset(addr, 0, na * 4);
a += offset;
if (na > 1)
@@ -135,9 +127,9 @@ static u64 of_bus_pci_map(u32 *addr, u32 *range, int na, int ns, int pna)
return OF_BAD_ADDR;
/* Read address values, skipping high cell */
- cp = of_read_addr(range + 1, na - 1);
- s = of_read_addr(range + na + pna, ns);
- da = of_read_addr(addr + 1, na - 1);
+ cp = of_read_number(range + 1, na - 1);
+ s = of_read_number(range + na + pna, ns);
+ da = of_read_number(addr + 1, na - 1);
DBG("OF: PCI map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
@@ -195,9 +187,9 @@ static u64 of_bus_isa_map(u32 *addr, u32 *range, int na, int ns, int pna)
return OF_BAD_ADDR;
/* Read address values, skipping high cell */
- cp = of_read_addr(range + 1, na - 1);
- s = of_read_addr(range + na + pna, ns);
- da = of_read_addr(addr + 1, na - 1);
+ cp = of_read_number(range + 1, na - 1);
+ s = of_read_number(range + na + pna, ns);
+ da = of_read_number(addr + 1, na - 1);
DBG("OF: ISA map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
@@ -295,7 +287,7 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus,
*/
ranges = (u32 *)get_property(parent, "ranges", &rlen);
if (ranges == NULL || rlen == 0) {
- offset = of_read_addr(addr, na);
+ offset = of_read_number(addr, na);
memset(addr, 0, pna * 4);
DBG("OF: no ranges, 1:1 translation\n");
goto finish;
@@ -378,7 +370,7 @@ u64 of_translate_address(struct device_node *dev, u32 *in_addr)
/* If root, we have finished */
if (parent == NULL) {
DBG("OF: reached root node\n");
- result = of_read_addr(addr, na);
+ result = of_read_number(addr, na);
break;
}
@@ -442,7 +434,7 @@ u32 *of_get_address(struct device_node *dev, int index, u64 *size,
for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
if (i == index) {
if (size)
- *size = of_read_addr(prop + na, ns);
+ *size = of_read_number(prop + na, ns);
if (flags)
*flags = bus->get_flags(prop);
return prop;
@@ -484,7 +476,7 @@ u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) {
if (size)
- *size = of_read_addr(prop + na, ns);
+ *size = of_read_number(prop + na, ns);
if (flags)
*flags = bus->get_flags(prop);
return prop;
@@ -565,11 +557,414 @@ void of_parse_dma_window(struct device_node *dn, unsigned char *dma_window_prop,
prop = get_property(dn, "#address-cells", NULL);
cells = prop ? *(u32 *)prop : prom_n_addr_cells(dn);
- *phys = of_read_addr(dma_window, cells);
+ *phys = of_read_number(dma_window, cells);
dma_window += cells;
prop = get_property(dn, "ibm,#dma-size-cells", NULL);
cells = prop ? *(u32 *)prop : prom_n_size_cells(dn);
- *size = of_read_addr(dma_window, cells);
+ *size = of_read_number(dma_window, cells);
+}
+
+/*
+ * Interrupt remapper
+ */
+
+static unsigned int of_irq_workarounds;
+static struct device_node *of_irq_dflt_pic;
+
+static struct device_node *of_irq_find_parent(struct device_node *child)
+{
+ struct device_node *p;
+ phandle *parp;
+
+ if (!of_node_get(child))
+ return NULL;
+
+ do {
+ parp = (phandle *)get_property(child, "interrupt-parent", NULL);
+ if (parp == NULL)
+ p = of_get_parent(child);
+ else {
+ if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
+ p = of_node_get(of_irq_dflt_pic);
+ else
+ p = of_find_node_by_phandle(*parp);
+ }
+ of_node_put(child);
+ child = p;
+ } while (p && get_property(p, "#interrupt-cells", NULL) == NULL);
+
+ return p;
+}
+
+static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
+{
+ return (((pin - 1) + slot) % 4) + 1;
}
+
+/* This doesn't need to be called if you don't have any special workaround
+ * flags to pass
+ */
+void of_irq_map_init(unsigned int flags)
+{
+ of_irq_workarounds = flags;
+
+ /* OldWorld, don't bother looking at other things */
+ if (flags & OF_IMAP_OLDWORLD_MAC)
+ return;
+
+ /* If we don't have phandles, let's try to locate a default interrupt
+ * controller (happens when booting with BootX). We do a first match
+ * here, hopefully, that only ever happens on machines with one
+ * controller.
+ */
+ if (flags & OF_IMAP_NO_PHANDLE) {
+ struct device_node *np;
+
+ for(np = NULL; (np = of_find_all_nodes(np)) != NULL;) {
+ if (get_property(np, "interrupt-controller", NULL)
+ == NULL)
+ continue;
+ /* Skip /chosen/interrupt-controller */
+ if (strcmp(np->name, "chosen") == 0)
+ continue;
+ /* It seems like at least one person on this planet wants
+ * to use BootX on a machine with an AppleKiwi controller
+ * which happens to pretend to be an interrupt
+ * controller too.
+ */
+ if (strcmp(np->name, "AppleKiwi") == 0)
+ continue;
+ /* I think we found one ! */
+ of_irq_dflt_pic = np;
+ break;
+ }
+ }
+
+}
+
+int of_irq_map_raw(struct device_node *parent, u32 *intspec, u32 *addr,
+ struct of_irq *out_irq)
+{
+ struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
+ u32 *tmp, *imap, *imask;
+ u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
+ int imaplen, match, i;
+
+ ipar = of_node_get(parent);
+
+ /* First get the #interrupt-cells property of the current cursor
+ * that tells us how to interpret the passed-in intspec. If there
+ * is none, we are nice and just walk up the tree
+ */
+ do {
+ tmp = (u32 *)get_property(ipar, "#interrupt-cells", NULL);
+ if (tmp != NULL) {
+ intsize = *tmp;
+ break;
+ }
+ tnode = ipar;
+ ipar = of_irq_find_parent(ipar);
+ of_node_put(tnode);
+ } while (ipar);
+ if (ipar == NULL) {
+ DBG(" -> no parent found !\n");
+ goto fail;
+ }
+
+ DBG("of_irq_map_raw: ipar=%s, size=%d\n", ipar->full_name, intsize);
+
+ /* Look for this #address-cells. We have to implement the old linux
+ * trick of looking for the parent here as some device-trees rely on it
+ */
+ old = of_node_get(ipar);
+ do {
+ tmp = (u32 *)get_property(old, "#address-cells", NULL);
+ tnode = of_get_parent(old);
+ of_node_put(old);
+ old = tnode;
+ } while(old && tmp == NULL);
+ of_node_put(old);
+ old = NULL;
+ addrsize = (tmp == NULL) ? 2 : *tmp;
+
+ DBG(" -> addrsize=%d\n", addrsize);
+
+ /* Now start the actual "proper" walk of the interrupt tree */
+ while (ipar != NULL) {
+ /* Now check if cursor is an interrupt-controller and if it is
+ * then we are done
+ */
+ if (get_property(ipar, "interrupt-controller", NULL) != NULL) {
+ DBG(" -> got it !\n");
+ memcpy(out_irq->specifier, intspec,
+ intsize * sizeof(u32));
+ out_irq->size = intsize;
+ out_irq->controller = ipar;
+ of_node_put(old);
+ return 0;
+ }
+
+ /* Now look for an interrupt-map */
+ imap = (u32 *)get_property(ipar, "interrupt-map", &imaplen);
+ /* No interrupt map, check for an interrupt parent */
+ if (imap == NULL) {
+ DBG(" -> no map, getting parent\n");
+ newpar = of_irq_find_parent(ipar);
+ goto skiplevel;
+ }
+ imaplen /= sizeof(u32);
+
+ /* Look for a mask */
+ imask = (u32 *)get_property(ipar, "interrupt-map-mask", NULL);
+
+ /* If we were passed no "reg" property and we attempt to parse
+ * an interrupt-map, then #address-cells must be 0.
+ * Fail if it's not.
+ */
+ if (addr == NULL && addrsize != 0) {
+ DBG(" -> no reg passed in when needed !\n");
+ goto fail;
+ }
+
+ /* Parse interrupt-map */
+ match = 0;
+ while (imaplen > (addrsize + intsize + 1) && !match) {
+ /* Compare specifiers */
+ match = 1;
+ for (i = 0; i < addrsize && match; ++i) {
+ u32 mask = imask ? imask[i] : 0xffffffffu;
+ match = ((addr[i] ^ imap[i]) & mask) == 0;
+ }
+ for (; i < (addrsize + intsize) && match; ++i) {
+ u32 mask = imask ? imask[i] : 0xffffffffu;
+ match =
+ ((intspec[i-addrsize] ^ imap[i]) & mask) == 0;
+ }
+ imap += addrsize + intsize;
+ imaplen -= addrsize + intsize;
+
+ DBG(" -> match=%d (imaplen=%d)\n", match, imaplen);
+
+ /* Get the interrupt parent */
+ if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
+ newpar = of_node_get(of_irq_dflt_pic);
+ else
+ newpar = of_find_node_by_phandle((phandle)*imap);
+ imap++;
+ --imaplen;
+
+ /* Check if not found */
+ if (newpar == NULL) {
+ DBG(" -> imap parent not found !\n");
+ goto fail;
+ }
+
+ /* Get #interrupt-cells and #address-cells of new
+ * parent
+ */
+ tmp = (u32 *)get_property(newpar, "#interrupt-cells",
+ NULL);
+ if (tmp == NULL) {
+ DBG(" -> parent lacks #interrupt-cells !\n");
+ goto fail;
+ }
+ newintsize = *tmp;
+ tmp = (u32 *)get_property(newpar, "#address-cells",
+ NULL);
+ newaddrsize = (tmp == NULL) ? 0 : *tmp;
+
+ DBG(" -> newintsize=%d, newaddrsize=%d\n",
+ newintsize, newaddrsize);
+
+ /* Check for malformed properties */
+ if (imaplen < (newaddrsize + newintsize))
+ goto fail;
+
+ imap += newaddrsize + newintsize;
+ imaplen -= newaddrsize + newintsize;
+
+ DBG(" -> imaplen=%d\n", imaplen);
+ }
+ if (!match)
+ goto fail;
+
+ of_node_put(old);
+ old = of_node_get(newpar);
+ addrsize = newaddrsize;
+ intsize = newintsize;
+ intspec = imap - intsize;
+ addr = intspec - addrsize;
+
+ skiplevel:
+ /* Iterate again with new parent */
+ DBG(" -> new parent: %s\n", newpar ? newpar->full_name : "<>");
+ of_node_put(ipar);
+ ipar = newpar;
+ newpar = NULL;
+ }
+ fail:
+ of_node_put(ipar);
+ of_node_put(old);
+ of_node_put(newpar);
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(of_irq_map_raw);
+
+#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
+static int of_irq_map_oldworld(struct device_node *device, int index,
+ struct of_irq *out_irq)
+{
+ u32 *ints;
+ int intlen;
+
+ /*
+ * Old machines just have a list of interrupt numbers
+ * and no interrupt-controller nodes.
+ */
+ ints = (u32 *) get_property(device, "AAPL,interrupts", &intlen);
+ if (ints == NULL)
+ return -EINVAL;
+ intlen /= sizeof(u32);
+
+ if (index >= intlen)
+ return -EINVAL;
+
+ out_irq->controller = NULL;
+ out_irq->specifier[0] = ints[index];
+ out_irq->size = 1;
+
+ return 0;
+}
+#else /* defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) */
+static int of_irq_map_oldworld(struct device_node *device, int index,
+ struct of_irq *out_irq)
+{
+ return -EINVAL;
+}
+#endif /* !(defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)) */
+
+int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq)
+{
+ struct device_node *p;
+ u32 *intspec, *tmp, intsize, intlen, *addr;
+ int res;
+
+ DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index);
+
+ /* OldWorld mac stuff is "special", handle out of line */
+ if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC)
+ return of_irq_map_oldworld(device, index, out_irq);
+
+ /* Get the interrupts property */
+ intspec = (u32 *)get_property(device, "interrupts", &intlen);
+ if (intspec == NULL)
+ return -EINVAL;
+ intlen /= sizeof(u32);
+
+ /* Get the reg property (if any) */
+ addr = (u32 *)get_property(device, "reg", NULL);
+
+ /* Look for the interrupt parent. */
+ p = of_irq_find_parent(device);
+ if (p == NULL)
+ return -EINVAL;
+
+ /* Get size of interrupt specifier */
+ tmp = (u32 *)get_property(p, "#interrupt-cells", NULL);
+ if (tmp == NULL) {
+ of_node_put(p);
+ return -EINVAL;
+ }
+ intsize = *tmp;
+
+ /* Check index */
+ if (index * intsize >= intlen)
+ return -EINVAL;
+
+ /* Get new specifier and map it */
+ res = of_irq_map_raw(p, intspec + index * intsize, addr, out_irq);
+ of_node_put(p);
+ return res;
+}
+EXPORT_SYMBOL_GPL(of_irq_map_one);
+
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+{
+ struct device_node *dn, *ppnode;
+ struct pci_dev *ppdev;
+ u32 lspec;
+ u32 laddr[3];
+ u8 pin;
+ int rc;
+
+ /* Check if we have a device node, if yes, fallback to standard OF
+ * parsing
+ */
+ dn = pci_device_to_OF_node(pdev);
+ if (dn)
+ return of_irq_map_one(dn, 0, out_irq);
+
+ /* Ok, we don't, time to have fun. Let's start by building up an
+ * interrupt spec. we assume #interrupt-cells is 1, which is standard
+ * for PCI. If you do different, then don't use that routine.
+ */
+ rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
+ if (rc != 0)
+ return rc;
+ /* No pin, exit */
+ if (pin == 0)
+ return -ENODEV;
+
+ /* Now we walk up the PCI tree */
+ lspec = pin;
+ for (;;) {
+ /* Get the pci_dev of our parent */
+ ppdev = pdev->bus->self;
+
+ /* Ouch, it's a host bridge... */
+ if (ppdev == NULL) {
+#ifdef CONFIG_PPC64
+ ppnode = pci_bus_to_OF_node(pdev->bus);
+#else
+ struct pci_controller *host;
+ host = pci_bus_to_host(pdev->bus);
+ ppnode = host ? host->arch_data : NULL;
+#endif
+ /* No node for host bridge ? give up */
+ if (ppnode == NULL)
+ return -EINVAL;
+ } else
+ /* We found a P2P bridge, check if it has a node */
+ ppnode = pci_device_to_OF_node(ppdev);
+
+ /* Ok, we have found a parent with a device-node, hand over to
+ * the OF parsing code.
+ * We build a unit address from the linux device to be used for
+ * resolution. Note that we use the linux bus number which may
+ * not match your firmware bus numbering.
+ * Fortunately, in most cases, interrupt-map-mask doesn't include
+ * the bus number as part of the matching.
+ * You should still be careful about that though if you intend
+ * to rely on this function (you ship a firmware that doesn't
+ * create device nodes for all PCI devices).
+ */
+ if (ppnode)
+ break;
+
+ /* We can only get here if we hit a P2P bridge with no node,
+ * let's do standard swizzling and try again
+ */
+ lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec);
+ pdev = ppdev;
+ }
+
+ laddr[0] = (pdev->bus->number << 16)
+ | (pdev->devfn << 8);
+ laddr[1] = laddr[2] = 0;
+ return of_irq_map_raw(ppnode, &lspec, laddr, out_irq);
+}
+EXPORT_SYMBOL_GPL(of_irq_map_pci);
+
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 6eb7e49b394a..cda022657324 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -297,19 +297,9 @@ unsigned long __init find_and_init_phbs(void)
struct device_node *node;
struct pci_controller *phb;
unsigned int index;
- unsigned int root_size_cells = 0;
- unsigned int *opprop = NULL;
struct device_node *root = of_find_node_by_path("/");
- if (ppc64_interrupt_controller == IC_OPEN_PIC) {
- opprop = (unsigned int *)get_property(root,
- "platform-open-pic", NULL);
- }
-
- root_size_cells = prom_n_size_cells(root);
-
index = 0;
-
for (node = of_get_next_child(root, NULL);
node != NULL;
node = of_get_next_child(root, node)) {
@@ -324,13 +314,6 @@ unsigned long __init find_and_init_phbs(void)
setup_phb(node, phb);
pci_process_bridge_OF_ranges(phb, node, 0);
pci_setup_phb_io(phb, index == 0);
-#ifdef CONFIG_PPC_PSERIES
- /* XXX This code need serious fixing ... --BenH */
- if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) {
- int addr = root_size_cells * (index + 2) - 1;
- mpic_assign_isu(pSeries_mpic, index, opprop[addr]);
- }
-#endif
index++;
}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index ba7cd50d820d..e0df2ba1ab9f 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -51,7 +51,6 @@
extern void bootx_init(unsigned long r4, unsigned long phys);
-boot_infos_t *boot_infos;
struct ide_machdep_calls ppc_ide_md;
int boot_cpuid;
@@ -240,7 +239,6 @@ void __init setup_arch(char **cmdline_p)
ppc_md.init_early();
find_legacy_serial_ports();
- finish_device_tree();
smp_setup_cpu_maps();
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index ac7276c40685..fd1785e4c9bb 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -361,12 +361,15 @@ void __init setup_system(void)
/*
* Fill the ppc64_caches & systemcfg structures with informations
- * retrieved from the device-tree. Need to be called before
- * finish_device_tree() since the later requires some of the
- * informations filled up here to properly parse the interrupt tree.
+ * retrieved from the device-tree.
*/
initialize_cache_info();
+ /*
+ * Initialize irq remapping subsystem
+ */
+ irq_early_init();
+
#ifdef CONFIG_PPC_RTAS
/*
* Initialize RTAS if available
@@ -394,12 +397,6 @@ void __init setup_system(void)
find_legacy_serial_ports();
/*
- * "Finish" the device-tree, that is do the actual parsing of
- * some of the properties like the interrupt map
- */
- finish_device_tree();
-
- /*
* Initialize xmon
*/
#ifdef CONFIG_XMON_DEFAULT
@@ -427,8 +424,6 @@ void __init setup_system(void)
printk("-----------------------------------------------------\n");
printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size);
- printk("ppc64_interrupt_controller = 0x%ld\n",
- ppc64_interrupt_controller);
printk("physicalMemorySize = 0x%lx\n", lmb_phys_mem_size());
printk("ppc64_caches.dcache_line_size = 0x%x\n",
ppc64_caches.dline_size);
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index cdf5867838a6..fad8580f9081 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -218,7 +218,6 @@ struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node)
{
struct vio_dev *viodev;
unsigned int *unit_address;
- unsigned int *irq_p;
/* we need the 'device_type' property, in order to match with drivers */
if (of_node->type == NULL) {
@@ -243,16 +242,7 @@ struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node)
viodev->dev.platform_data = of_node_get(of_node);
- viodev->irq = NO_IRQ;
- irq_p = (unsigned int *)get_property(of_node, "interrupts", NULL);
- if (irq_p) {
- int virq = virt_irq_create_mapping(*irq_p);
- if (virq == NO_IRQ) {
- printk(KERN_ERR "Unable to allocate interrupt "
- "number for %s\n", of_node->full_name);
- } else
- viodev->irq = irq_offset_up(virq);
- }
+ viodev->irq = irq_of_parse_and_map(of_node, 0);
snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%x", *unit_address);
viodev->name = of_node->name;
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 7675e675dce1..5fe7b7faf45f 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -16,12 +16,21 @@ config MPC834x_SYS
3 PCI slots. The PIBs PCI initialization is the bootloader's
responsiblilty.
+config MPC834x_ITX
+ bool "Freescale MPC834x ITX"
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the MPC 834x ITX evaluation board.
+
+ Be aware that PCI initialization is the bootloader's
+ responsiblilty.
+
endchoice
config MPC834x
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
- default y if MPC834x_SYS
+ default y if MPC834x_SYS || MPC834x_ITX
endmenu
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 5c72367441a8..9387a110d28a 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -4,3 +4,4 @@
obj-y := misc.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o
+obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
new file mode 100644
index 000000000000..b46305645d38
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -0,0 +1,156 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc834x_itx.c
+ *
+ * MPC834x ITX board specific routines
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc83xx.h"
+
+#include <platforms/83xx/mpc834x_sys.h>
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+#ifdef CONFIG_PCI
+static int
+mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {PIRQB, PIRQC, PIRQD, PIRQA}, /* idsel 0x0e */
+ {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x0f */
+ {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x10 */
+ };
+
+ const long min_idsel = 0x0e, max_idsel = 0x10, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+#endif /* CONFIG_PCI */
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc834x_itx_setup_arch(void)
+{
+ struct device_node *np;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc834x_itx_setup_arch()", 0);
+
+ np = of_find_node_by_type(NULL, "cpu");
+ if (np != 0) {
+ unsigned int *fp =
+ (int *)get_property(np, "clock-frequency", NULL);
+ if (fp != 0)
+ loops_per_jiffy = *fp / HZ;
+ else
+ loops_per_jiffy = 50000000 / HZ;
+ of_node_put(np);
+ }
+#ifdef CONFIG_PCI
+ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+ add_bridge(np);
+
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_map_irq = mpc83xx_map_irq;
+ ppc_md.pci_exclude_device = mpc83xx_exclude_device;
+#endif
+
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+}
+
+void __init mpc834x_itx_init_IRQ(void)
+{
+ u8 senses[8] = {
+ 0, /* EXT 0 */
+ IRQ_SENSE_LEVEL, /* EXT 1 */
+ IRQ_SENSE_LEVEL, /* EXT 2 */
+ 0, /* EXT 3 */
+#ifdef CONFIG_PCI
+ IRQ_SENSE_LEVEL, /* EXT 4 */
+ IRQ_SENSE_LEVEL, /* EXT 5 */
+ IRQ_SENSE_LEVEL, /* EXT 6 */
+ IRQ_SENSE_LEVEL, /* EXT 7 */
+#else
+ 0, /* EXT 4 */
+ 0, /* EXT 5 */
+ 0, /* EXT 6 */
+ 0, /* EXT 7 */
+#endif
+ };
+
+ ipic_init(get_immrbase() + 0x00700, 0, 0, senses, 8);
+
+ /* Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ ipic_set_default_priority();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc834x_itx_probe(void)
+{
+ /* We always match for now, eventually we should look at the flat
+ dev tree to ensure this is the board we are suppose to run on
+ */
+ return 1;
+}
+
+define_machine(mpc834x_itx) {
+ .name = "MPC834x ITX",
+ .probe = mpc834x_itx_probe,
+ .setup_arch = mpc834x_itx_setup_arch,
+ .init_IRQ = mpc834x_itx_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.h b/arch/powerpc/platforms/83xx/mpc834x_itx.h
new file mode 100644
index 000000000000..174ca4ef55f3
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.h
@@ -0,0 +1,23 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc834x_itx.h
+ *
+ * MPC834X ITX common board definitions
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC83XX_ITX_H__
+#define __MACH_MPC83XX_ITX_H__
+
+#define PIRQA MPC83xx_IRQ_EXT4
+#define PIRQB MPC83xx_IRQ_EXT5
+#define PIRQC MPC83xx_IRQ_EXT6
+#define PIRQD MPC83xx_IRQ_EXT7
+
+#endif /* __MACH_MPC83XX_ITX_H__ */
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 22da1335445a..9d5da7896892 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -1,6 +1,9 @@
/*
* Cell Internal Interrupt Controller
*
+ * Copyright (C) 2006 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ * IBM, Corp.
+ *
* (C) Copyright IBM Deutschland Entwicklung GmbH 2005
*
* Author: Arnd Bergmann <arndb@de.ibm.com>
@@ -25,11 +28,13 @@
#include <linux/module.h>
#include <linux/percpu.h>
#include <linux/types.h>
+#include <linux/ioport.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
#include <asm/ptrace.h>
+#include <asm/machdep.h>
#include "interrupt.h"
#include "cbe_regs.h"
@@ -37,231 +42,65 @@
struct iic {
struct cbe_iic_thread_regs __iomem *regs;
u8 target_id;
+ u8 eoi_stack[16];
+ int eoi_ptr;
+ struct irq_host *host;
};
static DEFINE_PER_CPU(struct iic, iic);
+#define IIC_NODE_COUNT 2
+static struct irq_host *iic_hosts[IIC_NODE_COUNT];
-void iic_local_enable(void)
+/* Convert between "pending" bits and hw irq number */
+static irq_hw_number_t iic_pending_to_hwnum(struct cbe_iic_pending_bits bits)
{
- struct iic *iic = &__get_cpu_var(iic);
- u64 tmp;
-
- /*
- * There seems to be a bug that is present in DD2.x CPUs
- * and still only partially fixed in DD3.1.
- * This bug causes a value written to the priority register
- * not to make it there, resulting in a system hang unless we
- * write it again.
- * Masking with 0xf0 is done because the Cell BE does not
- * implement the lower four bits of the interrupt priority,
- * they always read back as zeroes, although future CPUs
- * might implement different bits.
- */
- do {
- out_be64(&iic->regs->prio, 0xff);
- tmp = in_be64(&iic->regs->prio);
- } while ((tmp & 0xf0) != 0xf0);
-}
-
-void iic_local_disable(void)
-{
- out_be64(&__get_cpu_var(iic).regs->prio, 0x0);
-}
+ unsigned char unit = bits.source & 0xf;
-static unsigned int iic_startup(unsigned int irq)
-{
- return 0;
+ if (bits.flags & CBE_IIC_IRQ_IPI)
+ return IIC_IRQ_IPI0 | (bits.prio >> 4);
+ else if (bits.class <= 3)
+ return (bits.class << 4) | unit;
+ else
+ return IIC_IRQ_INVALID;
}
-static void iic_enable(unsigned int irq)
+static void iic_mask(unsigned int irq)
{
- iic_local_enable();
}
-static void iic_disable(unsigned int irq)
+static void iic_unmask(unsigned int irq)
{
}
-static void iic_end(unsigned int irq)
+static void iic_eoi(unsigned int irq)
{
- iic_local_enable();
+ struct iic *iic = &__get_cpu_var(iic);
+ out_be64(&iic->regs->prio, iic->eoi_stack[--iic->eoi_ptr]);
+ BUG_ON(iic->eoi_ptr < 0);
}
-static struct hw_interrupt_type iic_pic = {
+static struct irq_chip iic_chip = {
.typename = " CELL-IIC ",
- .startup = iic_startup,
- .enable = iic_enable,
- .disable = iic_disable,
- .end = iic_end,
+ .mask = iic_mask,
+ .unmask = iic_unmask,
+ .eoi = iic_eoi,
};
-static int iic_external_get_irq(struct cbe_iic_pending_bits pending)
-{
- int irq;
- unsigned char node, unit;
-
- node = pending.source >> 4;
- unit = pending.source & 0xf;
- irq = -1;
-
- /*
- * This mapping is specific to the Cell Broadband
- * Engine. We might need to get the numbers
- * from the device tree to support future CPUs.
- */
- switch (unit) {
- case 0x00:
- case 0x0b:
- /*
- * One of these units can be connected
- * to an external interrupt controller.
- */
- if (pending.class != 2)
- break;
- irq = IIC_EXT_OFFSET
- + spider_get_irq(node)
- + node * IIC_NODE_STRIDE;
- break;
- case 0x01 ... 0x04:
- case 0x07 ... 0x0a:
- /*
- * These units are connected to the SPEs
- */
- if (pending.class > 2)
- break;
- irq = IIC_SPE_OFFSET
- + pending.class * IIC_CLASS_STRIDE
- + node * IIC_NODE_STRIDE
- + unit;
- break;
- }
- if (irq == -1)
- printk(KERN_WARNING "Unexpected interrupt class %02x, "
- "source %02x, prio %02x, cpu %02x\n", pending.class,
- pending.source, pending.prio, smp_processor_id());
- return irq;
-}
-
/* Get an IRQ number from the pending state register of the IIC */
-int iic_get_irq(struct pt_regs *regs)
+static unsigned int iic_get_irq(struct pt_regs *regs)
{
- struct iic *iic;
- int irq;
- struct cbe_iic_pending_bits pending;
-
- iic = &__get_cpu_var(iic);
- *(unsigned long *) &pending =
- in_be64((unsigned long __iomem *) &iic->regs->pending_destr);
-
- irq = -1;
- if (pending.flags & CBE_IIC_IRQ_VALID) {
- if (pending.flags & CBE_IIC_IRQ_IPI) {
- irq = IIC_IPI_OFFSET + (pending.prio >> 4);
-/*
- if (irq > 0x80)
- printk(KERN_WARNING "Unexpected IPI prio %02x"
- "on CPU %02x\n", pending.prio,
- smp_processor_id());
-*/
- } else {
- irq = iic_external_get_irq(pending);
- }
- }
- return irq;
-}
-
-/* hardcoded part to be compatible with older firmware */
-
-static int setup_iic_hardcoded(void)
-{
- struct device_node *np;
- int nodeid, cpu;
- unsigned long regs;
- struct iic *iic;
-
- for_each_possible_cpu(cpu) {
- iic = &per_cpu(iic, cpu);
- nodeid = cpu/2;
-
- for (np = of_find_node_by_type(NULL, "cpu");
- np;
- np = of_find_node_by_type(np, "cpu")) {
- if (nodeid == *(int *)get_property(np, "node-id", NULL))
- break;
- }
-
- if (!np) {
- printk(KERN_WARNING "IIC: CPU %d not found\n", cpu);
- iic->regs = NULL;
- iic->target_id = 0xff;
- return -ENODEV;
- }
-
- regs = *(long *)get_property(np, "iic", NULL);
-
- /* hack until we have decided on the devtree info */
- regs += 0x400;
- if (cpu & 1)
- regs += 0x20;
-
- printk(KERN_INFO "IIC for CPU %d at %lx\n", cpu, regs);
- iic->regs = ioremap(regs, sizeof(struct cbe_iic_thread_regs));
- iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe);
- }
-
- return 0;
-}
-
-static int setup_iic(void)
-{
- struct device_node *dn;
- unsigned long *regs;
- char *compatible;
- unsigned *np, found = 0;
- struct iic *iic = NULL;
-
- for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
- compatible = (char *)get_property(dn, "compatible", NULL);
-
- if (!compatible) {
- printk(KERN_WARNING "no compatible property found !\n");
- continue;
- }
-
- if (strstr(compatible, "IBM,CBEA-Internal-Interrupt-Controller"))
- regs = (unsigned long *)get_property(dn,"reg", NULL);
- else
- continue;
-
- if (!regs)
- printk(KERN_WARNING "IIC: no reg property\n");
-
- np = (unsigned int *)get_property(dn, "ibm,interrupt-server-ranges", NULL);
-
- if (!np) {
- printk(KERN_WARNING "IIC: CPU association not found\n");
- iic->regs = NULL;
- iic->target_id = 0xff;
- return -ENODEV;
- }
-
- iic = &per_cpu(iic, np[0]);
- iic->regs = ioremap(regs[0], sizeof(struct cbe_iic_thread_regs));
- iic->target_id = ((np[0] & 2) << 3) + ((np[0] & 1) ? 0xf : 0xe);
- printk("IIC for CPU %d at %lx mapped to %p\n", np[0], regs[0], iic->regs);
-
- iic = &per_cpu(iic, np[1]);
- iic->regs = ioremap(regs[2], sizeof(struct cbe_iic_thread_regs));
- iic->target_id = ((np[1] & 2) << 3) + ((np[1] & 1) ? 0xf : 0xe);
- printk("IIC for CPU %d at %lx mapped to %p\n", np[1], regs[2], iic->regs);
-
- found++;
- }
-
- if (found)
- return 0;
- else
- return -ENODEV;
+ struct cbe_iic_pending_bits pending;
+ struct iic *iic;
+
+ iic = &__get_cpu_var(iic);
+ *(unsigned long *) &pending =
+ in_be64((unsigned long __iomem *) &iic->regs->pending_destr);
+ iic->eoi_stack[++iic->eoi_ptr] = pending.prio;
+ BUG_ON(iic->eoi_ptr > 15);
+ if (pending.flags & CBE_IIC_IRQ_VALID)
+ return irq_linear_revmap(iic->host,
+ iic_pending_to_hwnum(pending));
+ return NO_IRQ;
}
#ifdef CONFIG_SMP
@@ -269,12 +108,12 @@ static int setup_iic(void)
/* Use the highest interrupt priorities for IPI */
static inline int iic_ipi_to_irq(int ipi)
{
- return IIC_IPI_OFFSET + IIC_NUM_IPIS - 1 - ipi;
+ return IIC_IRQ_IPI0 + IIC_NUM_IPIS - 1 - ipi;
}
static inline int iic_irq_to_ipi(int irq)
{
- return IIC_NUM_IPIS - 1 - (irq - IIC_IPI_OFFSET);
+ return IIC_NUM_IPIS - 1 - (irq - IIC_IRQ_IPI0);
}
void iic_setup_cpu(void)
@@ -293,22 +132,51 @@ u8 iic_get_target_id(int cpu)
}
EXPORT_SYMBOL_GPL(iic_get_target_id);
+struct irq_host *iic_get_irq_host(int node)
+{
+ if (node < 0 || node >= IIC_NODE_COUNT)
+ return NULL;
+ return iic_hosts[node];
+}
+EXPORT_SYMBOL_GPL(iic_get_irq_host);
+
+
static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
{
- smp_message_recv(iic_irq_to_ipi(irq), regs);
+ int ipi = (int)(long)dev_id;
+
+ smp_message_recv(ipi, regs);
+
return IRQ_HANDLED;
}
static void iic_request_ipi(int ipi, const char *name)
{
- int irq;
-
- irq = iic_ipi_to_irq(ipi);
- /* IPIs are marked IRQF_DISABLED as they must run with irqs
- * disabled */
- get_irq_desc(irq)->chip = &iic_pic;
- get_irq_desc(irq)->status |= IRQ_PER_CPU;
- request_irq(irq, iic_ipi_action, IRQF_DISABLED, name, NULL);
+ int node, virq;
+
+ for (node = 0; node < IIC_NODE_COUNT; node++) {
+ char *rname;
+ if (iic_hosts[node] == NULL)
+ continue;
+ virq = irq_create_mapping(iic_hosts[node],
+ iic_ipi_to_irq(ipi), 0);
+ if (virq == NO_IRQ) {
+ printk(KERN_ERR
+ "iic: failed to map IPI %s on node %d\n",
+ name, node);
+ continue;
+ }
+ rname = kzalloc(strlen(name) + 16, GFP_KERNEL);
+ if (rname)
+ sprintf(rname, "%s node %d", name, node);
+ else
+ rname = (char *)name;
+ if (request_irq(virq, iic_ipi_action, IRQF_DISABLED,
+ rname, (void *)(long)ipi))
+ printk(KERN_ERR
+ "iic: failed to request IPI %s on node %d\n",
+ name, node);
+ }
}
void iic_request_IPIs(void)
@@ -319,34 +187,119 @@ void iic_request_IPIs(void)
iic_request_ipi(PPC_MSG_DEBUGGER_BREAK, "IPI-debug");
#endif /* CONFIG_DEBUGGER */
}
+
#endif /* CONFIG_SMP */
-static void iic_setup_spe_handlers(void)
+
+static int iic_host_match(struct irq_host *h, struct device_node *node)
+{
+ return h->host_data != NULL && node == h->host_data;
+}
+
+static int iic_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw, unsigned int flags)
+{
+ if (hw < IIC_IRQ_IPI0)
+ set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq);
+ else
+ set_irq_chip_and_handler(virq, &iic_chip, handle_percpu_irq);
+ return 0;
+}
+
+static int iic_host_xlate(struct irq_host *h, struct device_node *ct,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+
+{
+ /* Currently, we don't translate anything. That needs to be fixed as
+ * we get better defined device-trees. iic interrupts have to be
+ * explicitely mapped by whoever needs them
+ */
+ return -ENODEV;
+}
+
+static struct irq_host_ops iic_host_ops = {
+ .match = iic_host_match,
+ .map = iic_host_map,
+ .xlate = iic_host_xlate,
+};
+
+static void __init init_one_iic(unsigned int hw_cpu, unsigned long addr,
+ struct irq_host *host)
{
- int be, isrc;
+ /* XXX FIXME: should locate the linux CPU number from the HW cpu
+ * number properly. We are lucky for now
+ */
+ struct iic *iic = &per_cpu(iic, hw_cpu);
+
+ iic->regs = ioremap(addr, sizeof(struct cbe_iic_thread_regs));
+ BUG_ON(iic->regs == NULL);
- /* Assume two threads per BE are present */
- for (be=0; be < num_present_cpus() / 2; be++) {
- for (isrc = 0; isrc < IIC_CLASS_STRIDE * 3; isrc++) {
- int irq = IIC_NODE_STRIDE * be + IIC_SPE_OFFSET + isrc;
- get_irq_desc(irq)->chip = &iic_pic;
+ iic->target_id = ((hw_cpu & 2) << 3) | ((hw_cpu & 1) ? 0xf : 0xe);
+ iic->eoi_stack[0] = 0xff;
+ iic->host = host;
+ out_be64(&iic->regs->prio, 0);
+
+ printk(KERN_INFO "IIC for CPU %d at %lx mapped to %p, target id 0x%x\n",
+ hw_cpu, addr, iic->regs, iic->target_id);
+}
+
+static int __init setup_iic(void)
+{
+ struct device_node *dn;
+ struct resource r0, r1;
+ struct irq_host *host;
+ int found = 0;
+ u32 *np;
+
+ for (dn = NULL;
+ (dn = of_find_node_by_name(dn,"interrupt-controller")) != NULL;) {
+ if (!device_is_compatible(dn,
+ "IBM,CBEA-Internal-Interrupt-Controller"))
+ continue;
+ np = (u32 *)get_property(dn, "ibm,interrupt-server-ranges",
+ NULL);
+ if (np == NULL) {
+ printk(KERN_WARNING "IIC: CPU association not found\n");
+ of_node_put(dn);
+ return -ENODEV;
+ }
+ if (of_address_to_resource(dn, 0, &r0) ||
+ of_address_to_resource(dn, 1, &r1)) {
+ printk(KERN_WARNING "IIC: Can't resolve addresses\n");
+ of_node_put(dn);
+ return -ENODEV;
}
+ host = NULL;
+ if (found < IIC_NODE_COUNT) {
+ host = irq_alloc_host(IRQ_HOST_MAP_LINEAR,
+ IIC_SOURCE_COUNT,
+ &iic_host_ops,
+ IIC_IRQ_INVALID);
+ iic_hosts[found] = host;
+ BUG_ON(iic_hosts[found] == NULL);
+ iic_hosts[found]->host_data = of_node_get(dn);
+ found++;
+ }
+ init_one_iic(np[0], r0.start, host);
+ init_one_iic(np[1], r1.start, host);
}
+
+ if (found)
+ return 0;
+ else
+ return -ENODEV;
}
-void iic_init_IRQ(void)
+void __init iic_init_IRQ(void)
{
- int cpu, irq_offset;
- struct iic *iic;
-
+ /* Discover and initialize iics */
if (setup_iic() < 0)
- setup_iic_hardcoded();
+ panic("IIC: Failed to initialize !\n");
- irq_offset = 0;
- for_each_possible_cpu(cpu) {
- iic = &per_cpu(iic, cpu);
- if (iic->regs)
- out_be64(&iic->regs->prio, 0xff);
- }
- iic_setup_spe_handlers();
+ /* Set master interrupt handling function */
+ ppc_md.get_irq = iic_get_irq;
+
+ /* Enable on current CPU */
+ iic_setup_cpu();
}
diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h
index 799f77d98f96..5560a92ec3ab 100644
--- a/arch/powerpc/platforms/cell/interrupt.h
+++ b/arch/powerpc/platforms/cell/interrupt.h
@@ -37,27 +37,24 @@
*/
enum {
- IIC_EXT_OFFSET = 0x00, /* Start of south bridge IRQs */
- IIC_NUM_EXT = 0x40, /* Number of south bridge IRQs */
- IIC_SPE_OFFSET = 0x40, /* Start of SPE interrupts */
- IIC_CLASS_STRIDE = 0x10, /* SPE IRQs per class */
- IIC_IPI_OFFSET = 0x70, /* Start of IPI IRQs */
- IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */
- IIC_NODE_STRIDE = 0x80, /* Total IRQs per node */
+ IIC_IRQ_INVALID = 0xff,
+ IIC_IRQ_MAX = 0x3f,
+ IIC_IRQ_EXT_IOIF0 = 0x20,
+ IIC_IRQ_EXT_IOIF1 = 0x2b,
+ IIC_IRQ_IPI0 = 0x40,
+ IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */
+ IIC_SOURCE_COUNT = 0x50,
};
extern void iic_init_IRQ(void);
-extern int iic_get_irq(struct pt_regs *regs);
extern void iic_cause_IPI(int cpu, int mesg);
extern void iic_request_IPIs(void);
extern void iic_setup_cpu(void);
-extern void iic_local_enable(void);
-extern void iic_local_disable(void);
extern u8 iic_get_target_id(int cpu);
+extern struct irq_host *iic_get_irq_host(int node);
extern void spider_init_IRQ(void);
-extern int spider_get_irq(int node);
#endif
#endif /* ASM_CELL_PIC_H */
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index d8c2a29b3c15..282987d6d4a2 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -49,6 +49,7 @@
#include <asm/irq.h>
#include <asm/spu.h>
#include <asm/spu_priv1.h>
+#include <asm/udbg.h>
#include "interrupt.h"
#include "iommu.h"
@@ -79,10 +80,22 @@ static void cell_progress(char *s, unsigned short hex)
printk("*** %04x : %s\n", hex, s ? s : "");
}
+static void __init cell_pcibios_fixup(void)
+{
+ struct pci_dev *dev = NULL;
+
+ for_each_pci_dev(dev)
+ pci_read_irq_line(dev);
+}
+
+static void __init cell_init_irq(void)
+{
+ iic_init_IRQ();
+ spider_init_IRQ();
+}
+
static void __init cell_setup_arch(void)
{
- ppc_md.init_IRQ = iic_init_IRQ;
- ppc_md.get_irq = iic_get_irq;
#ifdef CONFIG_SPU_BASE
spu_priv1_ops = &spu_priv1_mmio_ops;
#endif
@@ -108,7 +121,6 @@ static void __init cell_setup_arch(void)
/* Find and initialize PCI host bridges */
init_pci_config_tokens();
find_and_init_phbs();
- spider_init_IRQ();
cbe_pervasive_init();
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
@@ -126,8 +138,6 @@ static void __init cell_init_early(void)
cell_init_iommu();
- ppc64_interrupt_controller = IC_CELL_PIC;
-
DBG(" <- cell_init_early()\n");
}
@@ -173,6 +183,8 @@ define_machine(cell) {
.calibrate_decr = generic_calibrate_decr,
.check_legacy_ioport = cell_check_legacy_ioport,
.progress = cell_progress,
+ .init_IRQ = cell_init_irq,
+ .pcibios_fixup = cell_pcibios_fixup,
#ifdef CONFIG_KEXEC
.machine_kexec = default_machine_kexec,
.machine_kexec_prepare = default_machine_kexec_prepare,
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index 7c3a0b6d34fd..ae7ef88f1a37 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -22,6 +22,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/ioport.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
@@ -56,184 +57,313 @@ enum {
REISWAITEN = 0x508, /* Reissue Wait Control*/
};
-static void __iomem *spider_pics[4];
+#define SPIDER_CHIP_COUNT 4
+#define SPIDER_SRC_COUNT 64
+#define SPIDER_IRQ_INVALID 63
-static void __iomem *spider_get_pic(int irq)
-{
- int node = irq / IIC_NODE_STRIDE;
- irq %= IIC_NODE_STRIDE;
-
- if (irq >= IIC_EXT_OFFSET &&
- irq < IIC_EXT_OFFSET + IIC_NUM_EXT &&
- spider_pics)
- return spider_pics[node];
- return NULL;
-}
+struct spider_pic {
+ struct irq_host *host;
+ struct device_node *of_node;
+ void __iomem *regs;
+ unsigned int node_id;
+};
+static struct spider_pic spider_pics[SPIDER_CHIP_COUNT];
-static int spider_get_nr(unsigned int irq)
+static struct spider_pic *spider_virq_to_pic(unsigned int virq)
{
- return (irq % IIC_NODE_STRIDE) - IIC_EXT_OFFSET;
+ return irq_map[virq].host->host_data;
}
-static void __iomem *spider_get_irq_config(int irq)
+static void __iomem *spider_get_irq_config(struct spider_pic *pic,
+ unsigned int src)
{
- void __iomem *pic;
- pic = spider_get_pic(irq);
- return pic + TIR_CFGA + 8 * spider_get_nr(irq);
+ return pic->regs + TIR_CFGA + 8 * src;
}
-static void spider_enable_irq(unsigned int irq)
+static void spider_unmask_irq(unsigned int virq)
{
- int nodeid = (irq / IIC_NODE_STRIDE) * 0x10;
- void __iomem *cfg = spider_get_irq_config(irq);
- irq = spider_get_nr(irq);
+ struct spider_pic *pic = spider_virq_to_pic(virq);
+ void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq);
- out_be32(cfg, (in_be32(cfg) & ~0xf0)| 0x3107000eu | nodeid);
- out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq);
+ /* We use no locking as we should be covered by the descriptor lock
+ * for access to invidual source configuration registers
+ */
+ out_be32(cfg, in_be32(cfg) | 0x30000000u);
}
-static void spider_disable_irq(unsigned int irq)
+static void spider_mask_irq(unsigned int virq)
{
- void __iomem *cfg = spider_get_irq_config(irq);
- irq = spider_get_nr(irq);
+ struct spider_pic *pic = spider_virq_to_pic(virq);
+ void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq);
+ /* We use no locking as we should be covered by the descriptor lock
+ * for access to invidual source configuration registers
+ */
out_be32(cfg, in_be32(cfg) & ~0x30000000u);
}
-static unsigned int spider_startup_irq(unsigned int irq)
+static void spider_ack_irq(unsigned int virq)
{
- spider_enable_irq(irq);
- return 0;
-}
+ struct spider_pic *pic = spider_virq_to_pic(virq);
+ unsigned int src = irq_map[virq].hwirq;
-static void spider_shutdown_irq(unsigned int irq)
-{
- spider_disable_irq(irq);
-}
+ /* Reset edge detection logic if necessary
+ */
+ if (get_irq_desc(virq)->status & IRQ_LEVEL)
+ return;
-static void spider_end_irq(unsigned int irq)
-{
- spider_enable_irq(irq);
-}
+ /* Only interrupts 47 to 50 can be set to edge */
+ if (src < 47 || src > 50)
+ return;
-static void spider_ack_irq(unsigned int irq)
-{
- spider_disable_irq(irq);
- iic_local_enable();
+ /* Perform the clear of the edge logic */
+ out_be32(pic->regs + TIR_EDC, 0x100 | (src & 0xf));
}
-static struct hw_interrupt_type spider_pic = {
+static struct irq_chip spider_pic = {
.typename = " SPIDER ",
- .startup = spider_startup_irq,
- .shutdown = spider_shutdown_irq,
- .enable = spider_enable_irq,
- .disable = spider_disable_irq,
+ .unmask = spider_unmask_irq,
+ .mask = spider_mask_irq,
.ack = spider_ack_irq,
- .end = spider_end_irq,
};
-int spider_get_irq(int node)
+static int spider_host_match(struct irq_host *h, struct device_node *node)
{
- unsigned long cs;
- void __iomem *regs = spider_pics[node];
-
- cs = in_be32(regs + TIR_CS) >> 24;
-
- if (cs == 63)
- return -1;
- else
- return cs;
+ struct spider_pic *pic = h->host_data;
+ return node == pic->of_node;
}
-/* hardcoded part to be compatible with older firmware */
-
-void spider_init_IRQ_hardcoded(void)
+static int spider_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw, unsigned int flags)
{
- int node;
- long spiderpic;
- long pics[] = { 0x24000008000, 0x34000008000 };
- int n;
-
- pr_debug("%s(%d): Using hardcoded defaults\n", __FUNCTION__, __LINE__);
-
- for (node = 0; node < num_present_cpus()/2; node++) {
- spiderpic = pics[node];
- printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic);
- spider_pics[node] = ioremap(spiderpic, 0x800);
- for (n = 0; n < IIC_NUM_EXT; n++) {
- int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
- get_irq_desc(irq)->chip = &spider_pic;
- }
-
- /* do not mask any interrupts because of level */
- out_be32(spider_pics[node] + TIR_MSK, 0x0);
-
- /* disable edge detection clear */
- /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
-
- /* enable interrupt packets to be output */
- out_be32(spider_pics[node] + TIR_PIEN,
- in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
-
- /* Enable the interrupt detection enable bit. Do this last! */
- out_be32(spider_pics[node] + TIR_DEN,
- in_be32(spider_pics[node] + TIR_DEN) | 0x1);
+ unsigned int sense = flags & IRQ_TYPE_SENSE_MASK;
+ struct spider_pic *pic = h->host_data;
+ void __iomem *cfg = spider_get_irq_config(pic, hw);
+ int level = 0;
+ u32 ic;
+
+ /* Note that only level high is supported for most interrupts */
+ if (sense != IRQ_TYPE_NONE && sense != IRQ_TYPE_LEVEL_HIGH &&
+ (hw < 47 || hw > 50))
+ return -EINVAL;
+
+ /* Decode sense type */
+ switch(sense) {
+ case IRQ_TYPE_EDGE_RISING:
+ ic = 0x3;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ ic = 0x2;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ ic = 0x0;
+ level = 1;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ case IRQ_TYPE_NONE:
+ ic = 0x1;
+ level = 1;
+ break;
+ default:
+ return -EINVAL;
}
-}
-void spider_init_IRQ(void)
-{
- long spider_reg;
- struct device_node *dn;
- char *compatible;
- int n, node = 0;
+ /* Configure the source. One gross hack that was there before and
+ * that I've kept around is the priority to the BE which I set to
+ * be the same as the interrupt source number. I don't know wether
+ * that's supposed to make any kind of sense however, we'll have to
+ * decide that, but for now, I'm not changing the behaviour.
+ */
+ out_be32(cfg, (ic << 24) | (0x7 << 16) | (pic->node_id << 4) | 0xe);
+ out_be32(cfg + 4, (0x2 << 16) | (hw & 0xff));
+
+ if (level)
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(virq, &spider_pic, handle_level_irq);
+ return 0;
+}
- for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
- compatible = (char *)get_property(dn, "compatible", NULL);
+static int spider_host_xlate(struct irq_host *h, struct device_node *ct,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_flags)
- if (!compatible)
- continue;
+{
+ /* Spider interrupts have 2 cells, first is the interrupt source,
+ * second, well, I don't know for sure yet ... We mask the top bits
+ * because old device-trees encode a node number in there
+ */
+ *out_hwirq = intspec[0] & 0x3f;
+ *out_flags = IRQ_TYPE_LEVEL_HIGH;
+ return 0;
+}
- if (strstr(compatible, "CBEA,platform-spider-pic"))
- spider_reg = *(long *)get_property(dn,"reg", NULL);
- else if (strstr(compatible, "sti,platform-spider-pic")) {
- spider_init_IRQ_hardcoded();
- return;
- } else
- continue;
+static struct irq_host_ops spider_host_ops = {
+ .match = spider_host_match,
+ .map = spider_host_map,
+ .xlate = spider_host_xlate,
+};
- if (!spider_reg)
- printk("interrupt controller does not have reg property !\n");
+static void spider_irq_cascade(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
+{
+ struct spider_pic *pic = desc->handler_data;
+ unsigned int cs, virq;
- n = prom_n_addr_cells(dn);
+ cs = in_be32(pic->regs + TIR_CS) >> 24;
+ if (cs == SPIDER_IRQ_INVALID)
+ virq = NO_IRQ;
+ else
+ virq = irq_linear_revmap(pic->host, cs);
+ if (virq != NO_IRQ)
+ generic_handle_irq(virq, regs);
+ desc->chip->eoi(irq);
+}
- if ( n != 2)
- printk("reg property with invalid number of elements \n");
+/* For hooking up the cascace we have a problem. Our device-tree is
+ * crap and we don't know on which BE iic interrupt we are hooked on at
+ * least not the "standard" way. We can reconstitute it based on two
+ * informations though: which BE node we are connected to and wether
+ * we are connected to IOIF0 or IOIF1. Right now, we really only care
+ * about the IBM cell blade and we know that its firmware gives us an
+ * interrupt-map property which is pretty strange.
+ */
+static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
+{
+ unsigned int virq;
+ u32 *imap, *tmp;
+ int imaplen, intsize, unit;
+ struct device_node *iic;
+ struct irq_host *iic_host;
+
+#if 0 /* Enable that when we have a way to retreive the node as well */
+ /* First, we check wether we have a real "interrupts" in the device
+ * tree in case the device-tree is ever fixed
+ */
+ struct of_irq oirq;
+ if (of_irq_map_one(pic->of_node, 0, &oirq) == 0) {
+ virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+ oirq.size);
+ goto bail;
+ }
+#endif
+
+ /* Now do the horrible hacks */
+ tmp = (u32 *)get_property(pic->of_node, "#interrupt-cells", NULL);
+ if (tmp == NULL)
+ return NO_IRQ;
+ intsize = *tmp;
+ imap = (u32 *)get_property(pic->of_node, "interrupt-map", &imaplen);
+ if (imap == NULL || imaplen < (intsize + 1))
+ return NO_IRQ;
+ iic = of_find_node_by_phandle(imap[intsize]);
+ if (iic == NULL)
+ return NO_IRQ;
+ imap += intsize + 1;
+ tmp = (u32 *)get_property(iic, "#interrupt-cells", NULL);
+ if (tmp == NULL)
+ return NO_IRQ;
+ intsize = *tmp;
+ /* Assume unit is last entry of interrupt specifier */
+ unit = imap[intsize - 1];
+ /* Ok, we have a unit, now let's try to get the node */
+ tmp = (u32 *)get_property(iic, "ibm,interrupt-server-ranges", NULL);
+ if (tmp == NULL) {
+ of_node_put(iic);
+ return NO_IRQ;
+ }
+ /* ugly as hell but works for now */
+ pic->node_id = (*tmp) >> 1;
+ of_node_put(iic);
+
+ /* Ok, now let's get cracking. You may ask me why I just didn't match
+ * the iic host from the iic OF node, but that way I'm still compatible
+ * with really really old old firmwares for which we don't have a node
+ */
+ iic_host = iic_get_irq_host(pic->node_id);
+ if (iic_host == NULL)
+ return NO_IRQ;
+ /* Manufacture an IIC interrupt number of class 2 */
+ virq = irq_create_mapping(iic_host, 0x20 | unit, 0);
+ if (virq == NO_IRQ)
+ printk(KERN_ERR "spider_pic: failed to map cascade !");
+ return virq;
+}
- spider_pics[node] = ioremap(spider_reg, 0x800);
- printk("SPIDER addr: %lx with %i addr_cells mapped to %p\n",
- spider_reg, n, spider_pics[node]);
+static void __init spider_init_one(struct device_node *of_node, int chip,
+ unsigned long addr)
+{
+ struct spider_pic *pic = &spider_pics[chip];
+ int i, virq;
+
+ /* Map registers */
+ pic->regs = ioremap(addr, 0x1000);
+ if (pic->regs == NULL)
+ panic("spider_pic: can't map registers !");
+
+ /* Allocate a host */
+ pic->host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, SPIDER_SRC_COUNT,
+ &spider_host_ops, SPIDER_IRQ_INVALID);
+ if (pic->host == NULL)
+ panic("spider_pic: can't allocate irq host !");
+ pic->host->host_data = pic;
+
+ /* Fill out other bits */
+ pic->of_node = of_node_get(of_node);
+
+ /* Go through all sources and disable them */
+ for (i = 0; i < SPIDER_SRC_COUNT; i++) {
+ void __iomem *cfg = pic->regs + TIR_CFGA + 8 * i;
+ out_be32(cfg, in_be32(cfg) & ~0x30000000u);
+ }
- for (n = 0; n < IIC_NUM_EXT; n++) {
- int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
- get_irq_desc(irq)->chip = &spider_pic;
- }
+ /* do not mask any interrupts because of level */
+ out_be32(pic->regs + TIR_MSK, 0x0);
- /* do not mask any interrupts because of level */
- out_be32(spider_pics[node] + TIR_MSK, 0x0);
+ /* enable interrupt packets to be output */
+ out_be32(pic->regs + TIR_PIEN, in_be32(pic->regs + TIR_PIEN) | 0x1);
- /* disable edge detection clear */
- /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
+ /* Hook up the cascade interrupt to the iic and nodeid */
+ virq = spider_find_cascade_and_node(pic);
+ if (virq == NO_IRQ)
+ return;
+ set_irq_data(virq, pic);
+ set_irq_chained_handler(virq, spider_irq_cascade);
- /* enable interrupt packets to be output */
- out_be32(spider_pics[node] + TIR_PIEN,
- in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
+ printk(KERN_INFO "spider_pic: node %d, addr: 0x%lx %s\n",
+ pic->node_id, addr, of_node->full_name);
- /* Enable the interrupt detection enable bit. Do this last! */
- out_be32(spider_pics[node] + TIR_DEN,
- in_be32(spider_pics[node] + TIR_DEN) | 0x1);
+ /* Enable the interrupt detection enable bit. Do this last! */
+ out_be32(pic->regs + TIR_DEN, in_be32(pic->regs + TIR_DEN) | 0x1);
+}
- node++;
+void __init spider_init_IRQ(void)
+{
+ struct resource r;
+ struct device_node *dn;
+ int chip = 0;
+
+ /* XXX node numbers are totally bogus. We _hope_ we get the device
+ * nodes in the right order here but that's definitely not guaranteed,
+ * we need to get the node from the device tree instead.
+ * There is currently no proper property for it (but our whole
+ * device-tree is bogus anyway) so all we can do is pray or maybe test
+ * the address and deduce the node-id
+ */
+ for (dn = NULL;
+ (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
+ if (device_is_compatible(dn, "CBEA,platform-spider-pic")) {
+ if (of_address_to_resource(dn, 0, &r)) {
+ printk(KERN_WARNING "spider-pic: Failed\n");
+ continue;
+ }
+ } else if (device_is_compatible(dn, "sti,platform-spider-pic")
+ && (chip < 2)) {
+ static long hard_coded_pics[] =
+ { 0x24000008000, 0x34000008000 };
+ r.start = hard_coded_pics[chip];
+ } else
+ continue;
+ spider_init_one(dn, chip++, r.start);
}
}
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 656c1ef5f4ad..5d2313a6c82b 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -264,51 +264,57 @@ spu_irq_class_2(int irq, void *data, struct pt_regs *regs)
return stat ? IRQ_HANDLED : IRQ_NONE;
}
-static int
-spu_request_irqs(struct spu *spu)
+static int spu_request_irqs(struct spu *spu)
{
- int ret;
- int irq_base;
-
- irq_base = IIC_NODE_STRIDE * spu->node + IIC_SPE_OFFSET;
-
- snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number);
- ret = request_irq(irq_base + spu->isrc,
- spu_irq_class_0, IRQF_DISABLED, spu->irq_c0, spu);
- if (ret)
- goto out;
-
- snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number);
- ret = request_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc,
- spu_irq_class_1, IRQF_DISABLED, spu->irq_c1, spu);
- if (ret)
- goto out1;
+ int ret = 0;
- snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number);
- ret = request_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc,
- spu_irq_class_2, IRQF_DISABLED, spu->irq_c2, spu);
- if (ret)
- goto out2;
- goto out;
+ if (spu->irqs[0] != NO_IRQ) {
+ snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0",
+ spu->number);
+ ret = request_irq(spu->irqs[0], spu_irq_class_0,
+ IRQF_DISABLED,
+ spu->irq_c0, spu);
+ if (ret)
+ goto bail0;
+ }
+ if (spu->irqs[1] != NO_IRQ) {
+ snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1",
+ spu->number);
+ ret = request_irq(spu->irqs[1], spu_irq_class_1,
+ IRQF_DISABLED,
+ spu->irq_c1, spu);
+ if (ret)
+ goto bail1;
+ }
+ if (spu->irqs[2] != NO_IRQ) {
+ snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2",
+ spu->number);
+ ret = request_irq(spu->irqs[2], spu_irq_class_2,
+ IRQF_DISABLED,
+ spu->irq_c2, spu);
+ if (ret)
+ goto bail2;
+ }
+ return 0;
-out2:
- free_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, spu);
-out1:
- free_irq(irq_base + spu->isrc, spu);
-out:
+bail2:
+ if (spu->irqs[1] != NO_IRQ)
+ free_irq(spu->irqs[1], spu);
+bail1:
+ if (spu->irqs[0] != NO_IRQ)
+ free_irq(spu->irqs[0], spu);
+bail0:
return ret;
}
-static void
-spu_free_irqs(struct spu *spu)
+static void spu_free_irqs(struct spu *spu)
{
- int irq_base;
-
- irq_base = IIC_NODE_STRIDE * spu->node + IIC_SPE_OFFSET;
-
- free_irq(irq_base + spu->isrc, spu);
- free_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, spu);
- free_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc, spu);
+ if (spu->irqs[0] != NO_IRQ)
+ free_irq(spu->irqs[0], spu);
+ if (spu->irqs[1] != NO_IRQ)
+ free_irq(spu->irqs[1], spu);
+ if (spu->irqs[2] != NO_IRQ)
+ free_irq(spu->irqs[2], spu);
}
static LIST_HEAD(spu_list);
@@ -559,17 +565,38 @@ static void spu_unmap(struct spu *spu)
iounmap((u8 __iomem *)spu->local_store);
}
+/* This function shall be abstracted for HV platforms */
+static int __init spu_map_interrupts(struct spu *spu, struct device_node *np)
+{
+ struct irq_host *host;
+ unsigned int isrc;
+ u32 *tmp;
+
+ host = iic_get_irq_host(spu->node);
+ if (host == NULL)
+ return -ENODEV;
+
+ /* Get the interrupt source from the device-tree */
+ tmp = (u32 *)get_property(np, "isrc", NULL);
+ if (!tmp)
+ return -ENODEV;
+ spu->isrc = isrc = tmp[0];
+
+ /* Now map interrupts of all 3 classes */
+ spu->irqs[0] = irq_create_mapping(host, 0x00 | isrc, 0);
+ spu->irqs[1] = irq_create_mapping(host, 0x10 | isrc, 0);
+ spu->irqs[2] = irq_create_mapping(host, 0x20 | isrc, 0);
+
+ /* Right now, we only fail if class 2 failed */
+ return spu->irqs[2] == NO_IRQ ? -EINVAL : 0;
+}
+
static int __init spu_map_device(struct spu *spu, struct device_node *node)
{
char *prop;
int ret;
ret = -ENODEV;
- prop = get_property(node, "isrc", NULL);
- if (!prop)
- goto out;
- spu->isrc = *(unsigned int *)prop;
-
spu->name = get_property(node, "name", NULL);
if (!spu->name)
goto out;
@@ -636,7 +663,8 @@ static int spu_create_sysdev(struct spu *spu)
return ret;
}
- sysdev_create_file(&spu->sysdev, &attr_isrc);
+ if (spu->isrc != 0)
+ sysdev_create_file(&spu->sysdev, &attr_isrc);
sysfs_add_device_to_node(&spu->sysdev, spu->nid);
return 0;
@@ -668,6 +696,9 @@ static int __init create_spu(struct device_node *spe)
spu->nid = of_node_to_nid(spe);
if (spu->nid == -1)
spu->nid = 0;
+ ret = spu_map_interrupts(spu, spe);
+ if (ret)
+ goto out_unmap;
spin_lock_init(&spu->register_lock);
spu_mfc_sdr_set(spu, mfspr(SPRN_SDR1));
spu_mfc_sr1_set(spu, 0x33);
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 66c253498803..6802cdc3168a 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -18,7 +18,6 @@
#include <asm/machdep.h>
#include <asm/sections.h>
#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
#include <asm/grackle.h>
#include <asm/rtas.h>
@@ -161,15 +160,9 @@ void __init
chrp_pcibios_fixup(void)
{
struct pci_dev *dev = NULL;
- struct device_node *np;
- /* PCI interrupts are controlled by the OpenPIC */
- for_each_pci_dev(dev) {
- np = pci_device_to_OF_node(dev);
- if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0))
- dev->irq = np->intrs[0].line;
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
- }
+ for_each_pci_dev(dev)
+ pci_read_irq_line(dev);
}
#define PRG_CL_RESET_VALID 0x00010000
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 1f1771b212b4..bb10171132fa 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -59,7 +59,7 @@ void rtas_indicator_progress(char *, unsigned short);
int _chrp_type;
EXPORT_SYMBOL(_chrp_type);
-struct mpic *chrp_mpic;
+static struct mpic *chrp_mpic;
/* Used for doing CHRP event-scans */
DEFINE_PER_CPU(struct timer_list, heartbeat_timer);
@@ -315,24 +315,32 @@ chrp_event_scan(unsigned long unused)
jiffies + event_scan_interval);
}
+static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
+{
+ unsigned int cascade_irq = i8259_irq(regs);
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq, regs);
+ desc->chip->eoi(irq);
+}
+
/*
* Finds the open-pic node and sets up the mpic driver.
*/
static void __init chrp_find_openpic(void)
{
struct device_node *np, *root;
- int len, i, j, irq_count;
+ int len, i, j;
int isu_size, idu_size;
unsigned int *iranges, *opprop = NULL;
int oplen = 0;
unsigned long opaddr;
int na = 1;
- unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS];
- np = find_type_devices("open-pic");
+ np = of_find_node_by_type(NULL, "open-pic");
if (np == NULL)
return;
- root = find_path_device("/");
+ root = of_find_node_by_path("/");
if (root) {
opprop = (unsigned int *) get_property
(root, "platform-open-pic", &oplen);
@@ -343,19 +351,15 @@ static void __init chrp_find_openpic(void)
oplen /= na * sizeof(unsigned int);
} else {
struct resource r;
- if (of_address_to_resource(np, 0, &r))
- return;
+ if (of_address_to_resource(np, 0, &r)) {
+ goto bail;
+ }
opaddr = r.start;
oplen = 0;
}
printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
- irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */
- prom_get_irq_senses(init_senses, NUM_ISA_INTERRUPTS, NR_IRQS - 4);
- /* i8259 cascade is always positive level */
- init_senses[0] = IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE;
-
iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len);
if (iranges == NULL)
len = 0; /* non-distributed mpic */
@@ -382,15 +386,12 @@ static void __init chrp_find_openpic(void)
if (len > 1)
isu_size = iranges[3];
- chrp_mpic = mpic_alloc(opaddr, MPIC_PRIMARY,
- isu_size, NUM_ISA_INTERRUPTS, irq_count,
- NR_IRQS - 4, init_senses, irq_count,
- " MPIC ");
+ chrp_mpic = mpic_alloc(np, opaddr, MPIC_PRIMARY,
+ isu_size, 0, " MPIC ");
if (chrp_mpic == NULL) {
printk(KERN_ERR "Failed to allocate MPIC structure\n");
- return;
+ goto bail;
}
-
j = na - 1;
for (i = 1; i < len; ++i) {
iranges += 2;
@@ -402,7 +403,10 @@ static void __init chrp_find_openpic(void)
}
mpic_init(chrp_mpic);
- mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL);
+ ppc_md.get_irq = mpic_get_irq;
+ bail:
+ of_node_put(root);
+ of_node_put(np);
}
#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
@@ -413,14 +417,34 @@ static struct irqaction xmon_irqaction = {
};
#endif
-void __init chrp_init_IRQ(void)
+static void __init chrp_find_8259(void)
{
- struct device_node *np;
+ struct device_node *np, *pic = NULL;
unsigned long chrp_int_ack = 0;
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
- struct device_node *kbd;
-#endif
+ unsigned int cascade_irq;
+
+ /* Look for cascade */
+ for_each_node_by_type(np, "interrupt-controller")
+ if (device_is_compatible(np, "chrp,iic")) {
+ pic = np;
+ break;
+ }
+ /* Ok, 8259 wasn't found. We need to handle the case where
+ * we have a pegasos that claims to be chrp but doesn't have
+ * a proper interrupt tree
+ */
+ if (pic == NULL && chrp_mpic != NULL) {
+ printk(KERN_ERR "i8259: Not found in device-tree"
+ " assuming no legacy interrupts\n");
+ return;
+ }
+ /* Look for intack. In a perfect world, we would look for it on
+ * the ISA bus that holds the 8259 but heh... Works that way. If
+ * we ever see a problem, we can try to re-use the pSeries code here.
+ * Also, Pegasos-type platforms don't have a proper node to start
+ * from anyway
+ */
for (np = find_devices("pci"); np != NULL; np = np->next) {
unsigned int *addrp = (unsigned int *)
get_property(np, "8259-interrupt-acknowledge", NULL);
@@ -431,11 +455,29 @@ void __init chrp_init_IRQ(void)
break;
}
if (np == NULL)
- printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n");
+ printk(KERN_WARNING "Cannot find PCI interrupt acknowledge"
+ " address, polling\n");
+
+ i8259_init(pic, chrp_int_ack);
+ if (ppc_md.get_irq == NULL)
+ ppc_md.get_irq = i8259_irq;
+ if (chrp_mpic != NULL) {
+ cascade_irq = irq_of_parse_and_map(pic, 0);
+ if (cascade_irq == NO_IRQ)
+ printk(KERN_ERR "i8259: failed to map cascade irq\n");
+ else
+ set_irq_chained_handler(cascade_irq,
+ chrp_8259_cascade);
+ }
+}
+void __init chrp_init_IRQ(void)
+{
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+ struct device_node *kbd;
+#endif
chrp_find_openpic();
-
- i8259_init(chrp_int_ack, 0);
+ chrp_find_8259();
if (_chrp_type == _CHRP_Pegasos)
ppc_md.get_irq = i8259_irq;
@@ -520,10 +562,6 @@ static int __init chrp_probe(void)
DMA_MODE_READ = 0x44;
DMA_MODE_WRITE = 0x48;
isa_io_base = CHRP_ISA_IO_BASE; /* default value */
- ppc_do_canonicalize_irqs = 1;
-
- /* Assume we have an 8259... */
- __irq_offset_value = NUM_ISA_INTERRUPTS;
return 1;
}
@@ -535,7 +573,6 @@ define_machine(chrp) {
.init = chrp_init2,
.show_cpuinfo = chrp_show_cpuinfo,
.init_IRQ = chrp_init_IRQ,
- .get_irq = mpic_get_irq,
.pcibios_fixup = chrp_pcibios_fixup,
.restart = rtas_restart,
.power_off = rtas_power_off,
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index c298ca1ea680..1d2307e87c30 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -29,7 +29,6 @@
#include <asm/smp.h>
#include <asm/residual.h>
#include <asm/time.h>
-#include <asm/open_pic.h>
#include <asm/machdep.h>
#include <asm/smp.h>
#include <asm/mpic.h>
diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c
index f70e820e7304..2275e64f3152 100644
--- a/arch/powerpc/platforms/iseries/irq.c
+++ b/arch/powerpc/platforms/iseries/irq.c
@@ -162,27 +162,6 @@ static void pci_event_handler(struct HvLpEvent *event, struct pt_regs *regs)
printk(KERN_ERR "pci_event_handler: NULL event received\n");
}
-/*
- * This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c
- * It must be called before the bus walk.
- */
-void __init iSeries_init_IRQ(void)
-{
- /* Register PCI event handler and open an event path */
- int ret;
-
- ret = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
- &pci_event_handler);
- if (ret == 0) {
- ret = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
- if (ret != 0)
- printk(KERN_ERR "iseries_init_IRQ: open event path "
- "failed with rc 0x%x\n", ret);
- } else
- printk(KERN_ERR "iseries_init_IRQ: register handler "
- "failed with rc 0x%x\n", ret);
-}
-
#define REAL_IRQ_TO_SUBBUS(irq) (((irq) >> 14) & 0xff)
#define REAL_IRQ_TO_BUS(irq) ((((irq) >> 6) & 0xff) + 1)
#define REAL_IRQ_TO_IDSEL(irq) ((((irq) >> 3) & 7) + 1)
@@ -196,7 +175,7 @@ static void iseries_enable_IRQ(unsigned int irq)
{
u32 bus, dev_id, function, mask;
const u32 sub_bus = 0;
- unsigned int rirq = virt_irq_to_real_map[irq];
+ unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
/* The IRQ has already been locked by the caller */
bus = REAL_IRQ_TO_BUS(rirq);
@@ -213,7 +192,7 @@ static unsigned int iseries_startup_IRQ(unsigned int irq)
{
u32 bus, dev_id, function, mask;
const u32 sub_bus = 0;
- unsigned int rirq = virt_irq_to_real_map[irq];
+ unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
bus = REAL_IRQ_TO_BUS(rirq);
function = REAL_IRQ_TO_FUNC(rirq);
@@ -254,7 +233,7 @@ static void iseries_shutdown_IRQ(unsigned int irq)
{
u32 bus, dev_id, function, mask;
const u32 sub_bus = 0;
- unsigned int rirq = virt_irq_to_real_map[irq];
+ unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
/* irq should be locked by the caller */
bus = REAL_IRQ_TO_BUS(rirq);
@@ -277,7 +256,7 @@ static void iseries_disable_IRQ(unsigned int irq)
{
u32 bus, dev_id, function, mask;
const u32 sub_bus = 0;
- unsigned int rirq = virt_irq_to_real_map[irq];
+ unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
/* The IRQ has already been locked by the caller */
bus = REAL_IRQ_TO_BUS(rirq);
@@ -291,19 +270,19 @@ static void iseries_disable_IRQ(unsigned int irq)
static void iseries_end_IRQ(unsigned int irq)
{
- unsigned int rirq = virt_irq_to_real_map[irq];
+ unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
HvCallPci_eoi(REAL_IRQ_TO_BUS(rirq), REAL_IRQ_TO_SUBBUS(rirq),
(REAL_IRQ_TO_IDSEL(rirq) << 4) + REAL_IRQ_TO_FUNC(rirq));
}
-static hw_irq_controller iSeries_IRQ_handler = {
- .typename = "iSeries irq controller",
- .startup = iseries_startup_IRQ,
- .shutdown = iseries_shutdown_IRQ,
- .enable = iseries_enable_IRQ,
- .disable = iseries_disable_IRQ,
- .end = iseries_end_IRQ
+static struct irq_chip iseries_pic = {
+ .typename = "iSeries irq controller",
+ .startup = iseries_startup_IRQ,
+ .shutdown = iseries_shutdown_IRQ,
+ .unmask = iseries_enable_IRQ,
+ .mask = iseries_disable_IRQ,
+ .eoi = iseries_end_IRQ
};
/*
@@ -314,17 +293,14 @@ static hw_irq_controller iSeries_IRQ_handler = {
int __init iSeries_allocate_IRQ(HvBusNumber bus,
HvSubBusNumber sub_bus, u32 bsubbus)
{
- int virtirq;
unsigned int realirq;
u8 idsel = ISERIES_GET_DEVICE_FROM_SUBBUS(bsubbus);
u8 function = ISERIES_GET_FUNCTION_FROM_SUBBUS(bsubbus);
realirq = (((((sub_bus << 8) + (bus - 1)) << 3) + (idsel - 1)) << 3)
+ function;
- virtirq = virt_irq_create_mapping(realirq);
- irq_desc[virtirq].chip = &iSeries_IRQ_handler;
- return virtirq;
+ return irq_create_mapping(NULL, realirq, IRQ_TYPE_NONE);
}
#endif /* CONFIG_PCI */
@@ -332,10 +308,9 @@ int __init iSeries_allocate_IRQ(HvBusNumber bus,
/*
* Get the next pending IRQ.
*/
-int iSeries_get_irq(struct pt_regs *regs)
+unsigned int iSeries_get_irq(struct pt_regs *regs)
{
- /* -2 means ignore this interrupt */
- int irq = -2;
+ int irq = NO_IRQ_IGNORE;
#ifdef CONFIG_SMP
if (get_lppaca()->int_dword.fields.ipi_cnt) {
@@ -358,9 +333,57 @@ int iSeries_get_irq(struct pt_regs *regs)
}
spin_unlock(&pending_irqs_lock);
if (irq >= NR_IRQS)
- irq = -2;
+ irq = NO_IRQ_IGNORE;
}
#endif
return irq;
}
+
+static int iseries_irq_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw, unsigned int flags)
+{
+ set_irq_chip_and_handler(virq, &iseries_pic, handle_fasteoi_irq);
+
+ return 0;
+}
+
+static struct irq_host_ops iseries_irq_host_ops = {
+ .map = iseries_irq_host_map,
+};
+
+/*
+ * This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c
+ * It must be called before the bus walk.
+ */
+void __init iSeries_init_IRQ(void)
+{
+ /* Register PCI event handler and open an event path */
+ struct irq_host *host;
+ int ret;
+
+ /*
+ * The Hypervisor only allows us up to 256 interrupt
+ * sources (the irq number is passed in a u8).
+ */
+ irq_set_virq_count(256);
+
+ /* Create irq host. No need for a revmap since HV will give us
+ * back our virtual irq number
+ */
+ host = irq_alloc_host(IRQ_HOST_MAP_NOMAP, 0, &iseries_irq_host_ops, 0);
+ BUG_ON(host == NULL);
+ irq_set_default_host(host);
+
+ ret = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
+ &pci_event_handler);
+ if (ret == 0) {
+ ret = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
+ if (ret != 0)
+ printk(KERN_ERR "iseries_init_IRQ: open event path "
+ "failed with rc 0x%x\n", ret);
+ } else
+ printk(KERN_ERR "iseries_init_IRQ: register handler "
+ "failed with rc 0x%x\n", ret);
+}
+
diff --git a/arch/powerpc/platforms/iseries/irq.h b/arch/powerpc/platforms/iseries/irq.h
index 188aa808abd7..1ee8985140e5 100644
--- a/arch/powerpc/platforms/iseries/irq.h
+++ b/arch/powerpc/platforms/iseries/irq.h
@@ -4,6 +4,6 @@
extern void iSeries_init_IRQ(void);
extern int iSeries_allocate_IRQ(HvBusNumber, HvSubBusNumber, u32);
extern void iSeries_activate_IRQs(void);
-extern int iSeries_get_irq(struct pt_regs *);
+extern unsigned int iSeries_get_irq(struct pt_regs *);
#endif /* _ISERIES_IRQ_H */
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index c877074745b2..c9605d773a77 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -294,8 +294,6 @@ static void __init iSeries_init_early(void)
{
DBG(" -> iSeries_init_early()\n");
- ppc64_interrupt_controller = IC_ISERIES;
-
#if defined(CONFIG_BLK_DEV_INITRD)
/*
* If the init RAM disk has been configured and there is
@@ -659,12 +657,6 @@ static int __init iseries_probe(void)
powerpc_firmware_features |= FW_FEATURE_ISERIES;
powerpc_firmware_features |= FW_FEATURE_LPAR;
- /*
- * The Hypervisor only allows us up to 256 interrupt
- * sources (the irq number is passed in a u8).
- */
- virt_irq_max = 255;
-
hpte_init_iSeries();
return 1;
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index f7170ff86dab..63a1670d3bfd 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -443,18 +443,23 @@ void __init maple_pci_init(void)
int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
{
struct device_node *np;
- int irq = channel ? 15 : 14;
+ unsigned int defirq = channel ? 15 : 14;
+ unsigned int irq;
if (pdev->vendor != PCI_VENDOR_ID_AMD ||
pdev->device != PCI_DEVICE_ID_AMD_8111_IDE)
- return irq;
+ return defirq;
np = pci_device_to_OF_node(pdev);
if (np == NULL)
- return irq;
- if (np->n_intrs < 2)
- return irq;
- return np->intrs[channel & 0x1].line;
+ return defirq;
+ irq = irq_of_parse_and_map(np, channel & 0x1);
+ if (irq == NO_IRQ) {
+ printk("Failed to map onboard IDE interrupt for channel %d\n",
+ channel);
+ return defirq;
+ }
+ return irq;
}
/* XXX: To remove once all firmwares are ok */
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 5cf90c28b141..cb528c9de4c3 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -11,7 +11,7 @@
*
*/
-#define DEBUG
+#undef DEBUG
#include <linux/init.h>
#include <linux/errno.h>
@@ -198,50 +198,81 @@ static void __init maple_init_early(void)
{
DBG(" -> maple_init_early\n");
- /* Setup interrupt mapping options */
- ppc64_interrupt_controller = IC_OPEN_PIC;
-
iommu_init_early_dart();
DBG(" <- maple_init_early\n");
}
-
-static __init void maple_init_IRQ(void)
+/*
+ * This is almost identical to pSeries and CHRP. We need to make that
+ * code generic at one point, with appropriate bits in the device-tree to
+ * identify the presence of an HT APIC
+ */
+static void __init maple_init_IRQ(void)
{
- struct device_node *root;
+ struct device_node *root, *np, *mpic_node = NULL;
unsigned int *opprop;
- unsigned long opic_addr;
+ unsigned long openpic_addr = 0;
+ int naddr, n, i, opplen, has_isus = 0;
struct mpic *mpic;
- unsigned char senses[128];
- int n;
+ unsigned int flags = MPIC_PRIMARY;
- DBG(" -> maple_init_IRQ\n");
+ /* Locate MPIC in the device-tree. Note that there is a bug
+ * in Maple device-tree where the type of the controller is
+ * open-pic and not interrupt-controller
+ */
+ for_each_node_by_type(np, "open-pic") {
+ mpic_node = np;
+ break;
+ }
+ if (mpic_node == NULL) {
+ printk(KERN_ERR
+ "Failed to locate the MPIC interrupt controller\n");
+ return;
+ }
- /* XXX: Non standard, replace that with a proper openpic/mpic node
- * in the device-tree. Find the Open PIC if present */
+ /* Find address list in /platform-open-pic */
root = of_find_node_by_path("/");
- opprop = (unsigned int *) get_property(root,
- "platform-open-pic", NULL);
- if (opprop == 0)
- panic("OpenPIC not found !\n");
-
- n = prom_n_addr_cells(root);
- for (opic_addr = 0; n > 0; --n)
- opic_addr = (opic_addr << 32) + *opprop++;
+ naddr = prom_n_addr_cells(root);
+ opprop = (unsigned int *) get_property(root, "platform-open-pic",
+ &opplen);
+ if (opprop != 0) {
+ openpic_addr = of_read_number(opprop, naddr);
+ has_isus = (opplen > naddr);
+ printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n",
+ openpic_addr, has_isus);
+ }
of_node_put(root);
- /* Obtain sense values from device-tree */
- prom_get_irq_senses(senses, 0, 128);
+ BUG_ON(openpic_addr == 0);
+
+ /* Check for a big endian MPIC */
+ if (get_property(np, "big-endian", NULL) != NULL)
+ flags |= MPIC_BIG_ENDIAN;
- mpic = mpic_alloc(opic_addr,
- MPIC_PRIMARY | MPIC_BIG_ENDIAN |
- MPIC_BROKEN_U3 | MPIC_WANTS_RESET,
- 0, 0, 128, 128, senses, 128, "U3-MPIC");
+ /* XXX Maple specific bits */
+ flags |= MPIC_BROKEN_U3 | MPIC_WANTS_RESET;
+
+ /* Setup the openpic driver. More device-tree junks, we hard code no
+ * ISUs for now. I'll have to revisit some stuffs with the folks doing
+ * the firmware for those
+ */
+ mpic = mpic_alloc(mpic_node, openpic_addr, flags,
+ /*has_isus ? 16 :*/ 0, 0, " MPIC ");
BUG_ON(mpic == NULL);
- mpic_init(mpic);
- DBG(" <- maple_init_IRQ\n");
+ /* Add ISUs */
+ opplen /= sizeof(u32);
+ for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
+ unsigned long isuaddr = of_read_number(opprop + i, naddr);
+ mpic_assign_isu(mpic, n, isuaddr);
+ }
+
+ /* All ISUs are setup, complete initialization */
+ mpic_init(mpic);
+ ppc_md.get_irq = mpic_get_irq;
+ of_node_put(mpic_node);
+ of_node_put(root);
}
static void __init maple_progress(char *s, unsigned short hex)
@@ -256,7 +287,9 @@ static void __init maple_progress(char *s, unsigned short hex)
static int __init maple_probe(void)
{
unsigned long root = of_get_flat_dt_root();
- if (!of_flat_dt_is_compatible(root, "Momentum,Maple"))
+
+ if (!of_flat_dt_is_compatible(root, "Momentum,Maple") &&
+ !of_flat_dt_is_compatible(root, "Momentum,Apache"))
return 0;
/*
* On U3, the DART (iommu) must be allocated now since it
@@ -277,7 +310,6 @@ define_machine(maple_md) {
.setup_arch = maple_setup_arch,
.init_early = maple_init_early,
.init_IRQ = maple_init_IRQ,
- .get_irq = mpic_get_irq,
.pcibios_fixup = maple_pcibios_fixup,
.pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq,
.restart = maple_restart,
diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c
index cb257aeb91f6..e63d52f227ee 100644
--- a/arch/powerpc/platforms/powermac/bootx_init.c
+++ b/arch/powerpc/platforms/powermac/bootx_init.c
@@ -162,6 +162,8 @@ static void __init bootx_add_chosen_props(unsigned long base,
{
u32 val;
+ bootx_dt_add_prop("linux,bootx", NULL, 0, mem_end);
+
if (bootx_info->kernelParamsOffset) {
char *args = (char *)((unsigned long)bootx_info) +
bootx_info->kernelParamsOffset;
@@ -181,8 +183,25 @@ static void __init bootx_add_chosen_props(unsigned long base,
static void __init bootx_add_display_props(unsigned long base,
unsigned long *mem_end)
{
+ boot_infos_t *bi = bootx_info;
+ u32 tmp;
+
bootx_dt_add_prop("linux,boot-display", NULL, 0, mem_end);
bootx_dt_add_prop("linux,opened", NULL, 0, mem_end);
+ tmp = bi->dispDeviceDepth;
+ bootx_dt_add_prop("linux,bootx-depth", &tmp, 4, mem_end);
+ tmp = bi->dispDeviceRect[2] - bi->dispDeviceRect[0];
+ bootx_dt_add_prop("linux,bootx-width", &tmp, 4, mem_end);
+ tmp = bi->dispDeviceRect[3] - bi->dispDeviceRect[1];
+ bootx_dt_add_prop("linux,bootx-height", &tmp, 4, mem_end);
+ tmp = bi->dispDeviceRowBytes;
+ bootx_dt_add_prop("linux,bootx-linebytes", &tmp, 4, mem_end);
+ tmp = (u32)bi->dispDeviceBase;
+ if (tmp == 0)
+ tmp = (u32)bi->logicalDisplayBase;
+ tmp += bi->dispDeviceRect[1] * bi->dispDeviceRowBytes;
+ tmp += bi->dispDeviceRect[0] * ((bi->dispDeviceDepth + 7) / 8);
+ bootx_dt_add_prop("linux,bootx-addr", &tmp, 4, mem_end);
}
static void __init bootx_dt_add_string(char *s, unsigned long *mem_end)
@@ -211,7 +230,7 @@ static void __init bootx_scan_dt_build_strings(unsigned long base,
if (!strcmp(namep, "/chosen")) {
DBG(" detected /chosen ! adding properties names !\n");
- bootx_dt_add_string("linux,platform", mem_end);
+ bootx_dt_add_string("linux,bootx", mem_end);
bootx_dt_add_string("linux,stdout-path", mem_end);
bootx_dt_add_string("linux,initrd-start", mem_end);
bootx_dt_add_string("linux,initrd-end", mem_end);
@@ -222,6 +241,11 @@ static void __init bootx_scan_dt_build_strings(unsigned long base,
DBG(" detected display ! adding properties names !\n");
bootx_dt_add_string("linux,boot-display", mem_end);
bootx_dt_add_string("linux,opened", mem_end);
+ bootx_dt_add_string("linux,bootx-depth", mem_end);
+ bootx_dt_add_string("linux,bootx-width", mem_end);
+ bootx_dt_add_string("linux,bootx-height", mem_end);
+ bootx_dt_add_string("linux,bootx-linebytes", mem_end);
+ bootx_dt_add_string("linux,bootx-addr", mem_end);
strncpy(bootx_disp_path, namep, 255);
}
@@ -443,7 +467,14 @@ void __init bootx_init(unsigned long r3, unsigned long r4)
if (!BOOT_INFO_IS_V2_COMPATIBLE(bi))
bi->logicalDisplayBase = bi->dispDeviceBase;
+ /* Fixup depth 16 -> 15 as that's what MacOS calls 16bpp */
+ if (bi->dispDeviceDepth == 16)
+ bi->dispDeviceDepth = 15;
+
#ifdef CONFIG_BOOTX_TEXT
+ ptr = (unsigned long)bi->logicalDisplayBase;
+ ptr += bi->dispDeviceRect[1] * bi->dispDeviceRowBytes;
+ ptr += bi->dispDeviceRect[0] * ((bi->dispDeviceDepth + 7) / 8);
btext_setup_display(bi->dispDeviceRect[2] - bi->dispDeviceRect[0],
bi->dispDeviceRect[3] - bi->dispDeviceRect[1],
bi->dispDeviceDepth, bi->dispDeviceRowBytes,
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index ceafaf52a668..8677f50c2586 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -522,10 +522,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
host->speed = KW_I2C_MODE_25KHZ;
break;
}
- if (np->n_intrs > 0)
- host->irq = np->intrs[0].line;
- else
- host->irq = NO_IRQ;
+ host->irq = irq_of_parse_and_map(np, 0);
+ if (host->irq == NO_IRQ)
+ printk(KERN_WARNING
+ "low_i2c: Failed to map interrupt for %s\n",
+ np->full_name);
host->base = ioremap((*addrp), 0x1000);
if (host->base == NULL) {
diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c
index 41fa2409482a..6a36ea9bf673 100644
--- a/arch/powerpc/platforms/powermac/nvram.c
+++ b/arch/powerpc/platforms/powermac/nvram.c
@@ -29,6 +29,8 @@
#include <asm/machdep.h>
#include <asm/nvram.h>
+#include "pmac.h"
+
#define DEBUG
#ifdef DEBUG
@@ -80,9 +82,6 @@ static int nvram_partitions[3];
// XXX Turn that into a sem
static DEFINE_SPINLOCK(nv_lock);
-extern int pmac_newworld;
-extern int system_running;
-
static int (*core99_write_bank)(int bank, u8* datas);
static int (*core99_erase_bank)(int bank);
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index d524a915aa86..556b349797e8 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -46,6 +46,9 @@ static int has_uninorth;
static struct pci_controller *u3_agp;
static struct pci_controller *u4_pcie;
static struct pci_controller *u3_ht;
+#define has_second_ohare 0
+#else
+static int has_second_ohare;
#endif /* CONFIG_PPC64 */
extern u8 pci_cache_line_size;
@@ -647,6 +650,33 @@ static void __init init_p2pbridge(void)
early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val);
}
+static void __init init_second_ohare(void)
+{
+ struct device_node *np = of_find_node_by_name(NULL, "pci106b,7");
+ unsigned char bus, devfn;
+ unsigned short cmd;
+
+ if (np == NULL)
+ return;
+
+ /* This must run before we initialize the PICs since the second
+ * ohare hosts a PIC that will be accessed there.
+ */
+ if (pci_device_from_OF_node(np, &bus, &devfn) == 0) {
+ struct pci_controller* hose =
+ pci_find_hose_for_OF_device(np);
+ if (!hose) {
+ printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
+ return;
+ }
+ early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ cmd &= ~PCI_COMMAND_IO;
+ early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
+ }
+ has_second_ohare = 1;
+}
+
/*
* Some Apple desktop machines have a NEC PD720100A USB2 controller
* on the motherboard. Open Firmware, on these, will disable the
@@ -688,9 +718,6 @@ static void __init fixup_nec_usb2(void)
" EHCI, fixing up...\n");
data &= ~1UL;
early_write_config_dword(hose, bus, devfn, 0xe4, data);
- early_write_config_byte(hose, bus,
- devfn | 2, PCI_INTERRUPT_LINE,
- nec->intrs[0].line);
}
}
}
@@ -958,32 +985,28 @@ static int __init add_bridge(struct device_node *dev)
return 0;
}
-static void __init pcibios_fixup_OF_interrupts(void)
+void __init pmac_pcibios_fixup(void)
{
struct pci_dev* dev = NULL;
- /*
- * Open Firmware often doesn't initialize the
- * PCI_INTERRUPT_LINE config register properly, so we
- * should find the device node and apply the interrupt
- * obtained from the OF device-tree
- */
for_each_pci_dev(dev) {
- struct device_node *node;
- node = pci_device_to_OF_node(dev);
- /* this is the node, see if it has interrupts */
- if (node && node->n_intrs > 0)
- dev->irq = node->intrs[0].line;
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ /* Read interrupt from the device-tree */
+ pci_read_irq_line(dev);
+
+ /* Fixup interrupt for the modem/ethernet combo controller.
+ * on machines with a second ohare chip.
+ * The number in the device tree (27) is bogus (correct for
+ * the ethernet-only board but not the combo ethernet/modem
+ * board). The real interrupt is 28 on the second controller
+ * -> 28+32 = 60.
+ */
+ if (has_second_ohare &&
+ dev->vendor == PCI_VENDOR_ID_DEC &&
+ dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS)
+ dev->irq = irq_create_mapping(NULL, 60, 0);
}
}
-void __init pmac_pcibios_fixup(void)
-{
- /* Fixup interrupts according to OF tree */
- pcibios_fixup_OF_interrupts();
-}
-
#ifdef CONFIG_PPC64
static void __init pmac_fixup_phb_resources(void)
{
@@ -1071,6 +1094,7 @@ void __init pmac_pci_init(void)
#else /* CONFIG_PPC64 */
init_p2pbridge();
+ init_second_ohare();
fixup_nec_usb2();
/* We are still having some issues with the Xserve G4, enabling
diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c
index d6eab8b3f7de..6d66359ec8c8 100644
--- a/arch/powerpc/platforms/powermac/pfunc_base.c
+++ b/arch/powerpc/platforms/powermac/pfunc_base.c
@@ -24,19 +24,18 @@ static irqreturn_t macio_gpio_irq(int irq, void *data, struct pt_regs *regs)
static int macio_do_gpio_irq_enable(struct pmf_function *func)
{
- if (func->node->n_intrs < 1)
+ unsigned int irq = irq_of_parse_and_map(func->node, 0);
+ if (irq == NO_IRQ)
return -EINVAL;
-
- return request_irq(func->node->intrs[0].line, macio_gpio_irq, 0,
- func->node->name, func);
+ return request_irq(irq, macio_gpio_irq, 0, func->node->name, func);
}
static int macio_do_gpio_irq_disable(struct pmf_function *func)
{
- if (func->node->n_intrs < 1)
+ unsigned int irq = irq_of_parse_and_map(func->node, 0);
+ if (irq == NO_IRQ)
return -EINVAL;
-
- free_irq(func->node->intrs[0].line, func);
+ free_irq(irq, func);
return 0;
}
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index c9b09a9e6050..3d328bc1f7e0 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -65,39 +65,36 @@ static u32 level_mask[4];
static DEFINE_SPINLOCK(pmac_pic_lock);
-#define GATWICK_IRQ_POOL_SIZE 10
-static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
-
#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+static int pmac_irq_cascade = -1;
+static struct irq_host *pmac_pic_host;
-/*
- * Mark an irq as "lost". This is only used on the pmac
- * since it can lose interrupts (see pmac_set_irq_mask).
- * -- Cort
- */
-void __set_lost(unsigned long irq_nr, int nokick)
+static void __pmac_retrigger(unsigned int irq_nr)
{
- if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) {
+ if (irq_nr >= max_real_irqs && pmac_irq_cascade > 0) {
+ __set_bit(irq_nr, ppc_lost_interrupts);
+ irq_nr = pmac_irq_cascade;
+ mb();
+ }
+ if (!__test_and_set_bit(irq_nr, ppc_lost_interrupts)) {
atomic_inc(&ppc_n_lost_interrupts);
- if (!nokick)
- set_dec(1);
+ set_dec(1);
}
}
-static void pmac_mask_and_ack_irq(unsigned int irq_nr)
+static void pmac_mask_and_ack_irq(unsigned int virq)
{
- unsigned long bit = 1UL << (irq_nr & 0x1f);
- int i = irq_nr >> 5;
+ unsigned int src = irq_map[virq].hwirq;
+ unsigned long bit = 1UL << (virq & 0x1f);
+ int i = virq >> 5;
unsigned long flags;
- if ((unsigned)irq_nr >= max_irqs)
- return;
-
- clear_bit(irq_nr, ppc_cached_irq_mask);
- if (test_and_clear_bit(irq_nr, ppc_lost_interrupts))
- atomic_dec(&ppc_n_lost_interrupts);
spin_lock_irqsave(&pmac_pic_lock, flags);
+ __clear_bit(src, ppc_cached_irq_mask);
+ if (__test_and_clear_bit(src, ppc_lost_interrupts))
+ atomic_dec(&ppc_n_lost_interrupts);
out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
out_le32(&pmac_irq_hw[i]->ack, bit);
do {
@@ -109,16 +106,29 @@ static void pmac_mask_and_ack_irq(unsigned int irq_nr)
spin_unlock_irqrestore(&pmac_pic_lock, flags);
}
-static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
+static void pmac_ack_irq(unsigned int virq)
+{
+ unsigned int src = irq_map[virq].hwirq;
+ unsigned long bit = 1UL << (src & 0x1f);
+ int i = src >> 5;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmac_pic_lock, flags);
+ if (__test_and_clear_bit(src, ppc_lost_interrupts))
+ atomic_dec(&ppc_n_lost_interrupts);
+ out_le32(&pmac_irq_hw[i]->ack, bit);
+ (void)in_le32(&pmac_irq_hw[i]->ack);
+ spin_unlock_irqrestore(&pmac_pic_lock, flags);
+}
+
+static void __pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
{
unsigned long bit = 1UL << (irq_nr & 0x1f);
int i = irq_nr >> 5;
- unsigned long flags;
if ((unsigned)irq_nr >= max_irqs)
return;
- spin_lock_irqsave(&pmac_pic_lock, flags);
/* enable unmasked interrupts */
out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
@@ -135,71 +145,78 @@ static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
* the bit in the flag register or request another interrupt.
*/
if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level))
- __set_lost((ulong)irq_nr, nokicklost);
- spin_unlock_irqrestore(&pmac_pic_lock, flags);
+ __pmac_retrigger(irq_nr);
}
/* When an irq gets requested for the first client, if it's an
* edge interrupt, we clear any previous one on the controller
*/
-static unsigned int pmac_startup_irq(unsigned int irq_nr)
+static unsigned int pmac_startup_irq(unsigned int virq)
{
- unsigned long bit = 1UL << (irq_nr & 0x1f);
- int i = irq_nr >> 5;
+ unsigned long flags;
+ unsigned int src = irq_map[virq].hwirq;
+ unsigned long bit = 1UL << (src & 0x1f);
+ int i = src >> 5;
- if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
+ spin_lock_irqsave(&pmac_pic_lock, flags);
+ if ((irq_desc[virq].status & IRQ_LEVEL) == 0)
out_le32(&pmac_irq_hw[i]->ack, bit);
- set_bit(irq_nr, ppc_cached_irq_mask);
- pmac_set_irq_mask(irq_nr, 0);
+ __set_bit(src, ppc_cached_irq_mask);
+ __pmac_set_irq_mask(src, 0);
+ spin_unlock_irqrestore(&pmac_pic_lock, flags);
return 0;
}
-static void pmac_mask_irq(unsigned int irq_nr)
+static void pmac_mask_irq(unsigned int virq)
{
- clear_bit(irq_nr, ppc_cached_irq_mask);
- pmac_set_irq_mask(irq_nr, 0);
- mb();
+ unsigned long flags;
+ unsigned int src = irq_map[virq].hwirq;
+
+ spin_lock_irqsave(&pmac_pic_lock, flags);
+ __clear_bit(src, ppc_cached_irq_mask);
+ __pmac_set_irq_mask(src, 0);
+ spin_unlock_irqrestore(&pmac_pic_lock, flags);
}
-static void pmac_unmask_irq(unsigned int irq_nr)
+static void pmac_unmask_irq(unsigned int virq)
{
- set_bit(irq_nr, ppc_cached_irq_mask);
- pmac_set_irq_mask(irq_nr, 0);
+ unsigned long flags;
+ unsigned int src = irq_map[virq].hwirq;
+
+ spin_lock_irqsave(&pmac_pic_lock, flags);
+ __set_bit(src, ppc_cached_irq_mask);
+ __pmac_set_irq_mask(src, 0);
+ spin_unlock_irqrestore(&pmac_pic_lock, flags);
}
-static void pmac_end_irq(unsigned int irq_nr)
+static int pmac_retrigger(unsigned int virq)
{
- if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
- && irq_desc[irq_nr].action) {
- set_bit(irq_nr, ppc_cached_irq_mask);
- pmac_set_irq_mask(irq_nr, 1);
- }
-}
+ unsigned long flags;
+ spin_lock_irqsave(&pmac_pic_lock, flags);
+ __pmac_retrigger(irq_map[virq].hwirq);
+ spin_unlock_irqrestore(&pmac_pic_lock, flags);
+ return 1;
+}
-struct hw_interrupt_type pmac_pic = {
+static struct irq_chip pmac_pic = {
.typename = " PMAC-PIC ",
.startup = pmac_startup_irq,
- .enable = pmac_unmask_irq,
- .disable = pmac_mask_irq,
- .ack = pmac_mask_and_ack_irq,
- .end = pmac_end_irq,
-};
-
-struct hw_interrupt_type gatwick_pic = {
- .typename = " GATWICK ",
- .startup = pmac_startup_irq,
- .enable = pmac_unmask_irq,
- .disable = pmac_mask_irq,
- .ack = pmac_mask_and_ack_irq,
- .end = pmac_end_irq,
+ .mask = pmac_mask_irq,
+ .ack = pmac_ack_irq,
+ .mask_ack = pmac_mask_and_ack_irq,
+ .unmask = pmac_unmask_irq,
+ .retrigger = pmac_retrigger,
};
static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs)
{
+ unsigned long flags;
int irq, bits;
+ int rc = IRQ_NONE;
+ spin_lock_irqsave(&pmac_pic_lock, flags);
for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
int i = irq >> 5;
bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
@@ -209,17 +226,20 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs)
if (bits == 0)
continue;
irq += __ilog2(bits);
+ spin_unlock_irqrestore(&pmac_pic_lock, flags);
__do_IRQ(irq, regs);
- return IRQ_HANDLED;
+ spin_lock_irqsave(&pmac_pic_lock, flags);
+ rc = IRQ_HANDLED;
}
- printk("gatwick irq not from gatwick pic\n");
- return IRQ_NONE;
+ spin_unlock_irqrestore(&pmac_pic_lock, flags);
+ return rc;
}
-static int pmac_get_irq(struct pt_regs *regs)
+static unsigned int pmac_pic_get_irq(struct pt_regs *regs)
{
int irq;
unsigned long bits = 0;
+ unsigned long flags;
#ifdef CONFIG_SMP
void psurge_smp_message_recv(struct pt_regs *);
@@ -227,9 +247,10 @@ static int pmac_get_irq(struct pt_regs *regs)
/* IPI's are a hack on the powersurge -- Cort */
if ( smp_processor_id() != 0 ) {
psurge_smp_message_recv(regs);
- return -2; /* ignore, already handled */
+ return NO_IRQ_IGNORE; /* ignore, already handled */
}
#endif /* CONFIG_SMP */
+ spin_lock_irqsave(&pmac_pic_lock, flags);
for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
int i = irq >> 5;
bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
@@ -241,133 +262,10 @@ static int pmac_get_irq(struct pt_regs *regs)
irq += __ilog2(bits);
break;
}
-
- return irq;
-}
-
-/* This routine will fix some missing interrupt values in the device tree
- * on the gatwick mac-io controller used by some PowerBooks
- *
- * Walking of OF nodes could use a bit more fixing up here, but it's not
- * very important as this is all boot time code on static portions of the
- * device-tree.
- *
- * However, the modifications done to "intrs" will have to be removed and
- * replaced with proper updates of the "interrupts" properties or
- * AAPL,interrupts, yet to be decided, once the dynamic parsing is there.
- */
-static void __init pmac_fix_gatwick_interrupts(struct device_node *gw,
- int irq_base)
-{
- struct device_node *node;
- int count;
-
- memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool));
- count = 0;
- for (node = NULL; (node = of_get_next_child(gw, node)) != NULL;) {
- /* Fix SCC */
- if ((strcasecmp(node->name, "escc") == 0) && node->child) {
- if (node->child->n_intrs < 3) {
- node->child->intrs = &gatwick_int_pool[count];
- count += 3;
- }
- node->child->n_intrs = 3;
- node->child->intrs[0].line = 15+irq_base;
- node->child->intrs[1].line = 4+irq_base;
- node->child->intrs[2].line = 5+irq_base;
- printk(KERN_INFO "irq: fixed SCC on gatwick"
- " (%d,%d,%d)\n",
- node->child->intrs[0].line,
- node->child->intrs[1].line,
- node->child->intrs[2].line);
- }
- /* Fix media-bay & left SWIM */
- if (strcasecmp(node->name, "media-bay") == 0) {
- struct device_node* ya_node;
-
- if (node->n_intrs == 0)
- node->intrs = &gatwick_int_pool[count++];
- node->n_intrs = 1;
- node->intrs[0].line = 29+irq_base;
- printk(KERN_INFO "irq: fixed media-bay on gatwick"
- " (%d)\n", node->intrs[0].line);
-
- ya_node = node->child;
- while(ya_node) {
- if (strcasecmp(ya_node->name, "floppy") == 0) {
- if (ya_node->n_intrs < 2) {
- ya_node->intrs = &gatwick_int_pool[count];
- count += 2;
- }
- ya_node->n_intrs = 2;
- ya_node->intrs[0].line = 19+irq_base;
- ya_node->intrs[1].line = 1+irq_base;
- printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n",
- ya_node->intrs[0].line, ya_node->intrs[1].line);
- }
- if (strcasecmp(ya_node->name, "ata4") == 0) {
- if (ya_node->n_intrs < 2) {
- ya_node->intrs = &gatwick_int_pool[count];
- count += 2;
- }
- ya_node->n_intrs = 2;
- ya_node->intrs[0].line = 14+irq_base;
- ya_node->intrs[1].line = 3+irq_base;
- printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n",
- ya_node->intrs[0].line, ya_node->intrs[1].line);
- }
- ya_node = ya_node->sibling;
- }
- }
- }
- if (count > 10) {
- printk("WARNING !! Gatwick interrupt pool overflow\n");
- printk(" GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE);
- printk(" requested = %d\n", count);
- }
-}
-
-/*
- * The PowerBook 3400/2400/3500 can have a combo ethernet/modem
- * card which includes an ohare chip that acts as a second interrupt
- * controller. If we find this second ohare, set it up and fix the
- * interrupt value in the device tree for the ethernet chip.
- */
-static void __init enable_second_ohare(struct device_node *np)
-{
- unsigned char bus, devfn;
- unsigned short cmd;
- struct device_node *ether;
-
- /* This code doesn't strictly belong here, it could be part of
- * either the PCI initialisation or the feature code. It's kept
- * here for historical reasons.
- */
- if (pci_device_from_OF_node(np, &bus, &devfn) == 0) {
- struct pci_controller* hose =
- pci_find_hose_for_OF_device(np);
- if (!hose) {
- printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
- return;
- }
- early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
- cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
- cmd &= ~PCI_COMMAND_IO;
- early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
- }
-
- /* Fix interrupt for the modem/ethernet combo controller. The number
- * in the device tree (27) is bogus (correct for the ethernet-only
- * board but not the combo ethernet/modem board).
- * The real interrupt is 28 on the second controller -> 28+32 = 60.
- */
- ether = of_find_node_by_name(NULL, "pci1011,14");
- if (ether && ether->n_intrs > 0) {
- ether->intrs[0].line = 60;
- printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n",
- ether->intrs[0].line);
- }
- of_node_put(ether);
+ spin_unlock_irqrestore(&pmac_pic_lock, flags);
+ if (unlikely(irq < 0))
+ return NO_IRQ;
+ return irq_linear_revmap(pmac_pic_host, irq);
}
#ifdef CONFIG_XMON
@@ -386,17 +284,60 @@ static struct irqaction gatwick_cascade_action = {
.name = "cascade",
};
+static int pmac_pic_host_match(struct irq_host *h, struct device_node *node)
+{
+ /* We match all, we don't always have a node anyway */
+ return 1;
+}
+
+static int pmac_pic_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw, unsigned int flags)
+{
+ struct irq_desc *desc = get_irq_desc(virq);
+ int level;
+
+ if (hw >= max_irqs)
+ return -EINVAL;
+
+ /* Mark level interrupts, set delayed disable for edge ones and set
+ * handlers
+ */
+ level = !!(level_mask[hw >> 5] & (1UL << (hw & 0x1f)));
+ if (level)
+ desc->status |= IRQ_LEVEL;
+ else
+ desc->status |= IRQ_DELAYED_DISABLE;
+ set_irq_chip_and_handler(virq, &pmac_pic, level ?
+ handle_level_irq : handle_edge_irq);
+ return 0;
+}
+
+static int pmac_pic_host_xlate(struct irq_host *h, struct device_node *ct,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq,
+ unsigned int *out_flags)
+
+{
+ *out_hwirq = *intspec;
+ return 0;
+}
+
+static struct irq_host_ops pmac_pic_host_ops = {
+ .match = pmac_pic_host_match,
+ .map = pmac_pic_host_map,
+ .xlate = pmac_pic_host_xlate,
+};
+
static void __init pmac_pic_probe_oldstyle(void)
{
int i;
- int irq_cascade = -1;
struct device_node *master = NULL;
struct device_node *slave = NULL;
u8 __iomem *addr;
struct resource r;
/* Set our get_irq function */
- ppc_md.get_irq = pmac_get_irq;
+ ppc_md.get_irq = pmac_pic_get_irq;
/*
* Find the interrupt controller type & node
@@ -414,7 +355,6 @@ static void __init pmac_pic_probe_oldstyle(void)
if (slave) {
max_irqs = 64;
level_mask[1] = OHARE_LEVEL_MASK;
- enable_second_ohare(slave);
}
} else if ((master = of_find_node_by_name(NULL, "mac-io")) != NULL) {
max_irqs = max_real_irqs = 64;
@@ -438,14 +378,18 @@ static void __init pmac_pic_probe_oldstyle(void)
max_irqs = 128;
level_mask[2] = HEATHROW_LEVEL_MASK;
level_mask[3] = 0;
- pmac_fix_gatwick_interrupts(slave, max_real_irqs);
}
}
BUG_ON(master == NULL);
- /* Set the handler for the main PIC */
- for ( i = 0; i < max_real_irqs ; i++ )
- irq_desc[i].chip = &pmac_pic;
+ /*
+ * Allocate an irq host
+ */
+ pmac_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, max_irqs,
+ &pmac_pic_host_ops,
+ max_irqs);
+ BUG_ON(pmac_pic_host == NULL);
+ irq_set_default_host(pmac_pic_host);
/* Get addresses of first controller if we have a node for it */
BUG_ON(of_address_to_resource(master, 0, &r));
@@ -472,39 +416,38 @@ static void __init pmac_pic_probe_oldstyle(void)
pmac_irq_hw[i++] =
(volatile struct pmac_irq_hw __iomem *)
(addr + 0x10);
- irq_cascade = slave->intrs[0].line;
+ pmac_irq_cascade = irq_of_parse_and_map(slave, 0);
printk(KERN_INFO "irq: Found slave Apple PIC %s for %d irqs"
" cascade: %d\n", slave->full_name,
- max_irqs - max_real_irqs, irq_cascade);
+ max_irqs - max_real_irqs, pmac_irq_cascade);
}
of_node_put(slave);
- /* disable all interrupts in all controllers */
+ /* Disable all interrupts in all controllers */
for (i = 0; i * 32 < max_irqs; ++i)
out_le32(&pmac_irq_hw[i]->enable, 0);
- /* mark level interrupts */
- for (i = 0; i < max_irqs; i++)
- if (level_mask[i >> 5] & (1UL << (i & 0x1f)))
- irq_desc[i].status = IRQ_LEVEL;
+ /* Hookup cascade irq */
+ if (slave && pmac_irq_cascade != NO_IRQ)
+ setup_irq(pmac_irq_cascade, &gatwick_cascade_action);
- /* Setup handlers for secondary controller and hook cascade irq*/
- if (slave) {
- for ( i = max_real_irqs ; i < max_irqs ; i++ )
- irq_desc[i].chip = &gatwick_pic;
- setup_irq(irq_cascade, &gatwick_cascade_action);
- }
printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs);
#ifdef CONFIG_XMON
- setup_irq(20, &xmon_action);
+ setup_irq(irq_create_mapping(NULL, 20, 0), &xmon_action);
#endif
}
#endif /* CONFIG_PPC32 */
-static int pmac_u3_cascade(struct pt_regs *regs, void *data)
+static void pmac_u3_cascade(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
{
- return mpic_get_one_irq((struct mpic *)data, regs);
+ struct mpic *mpic = desc->handler_data;
+
+ unsigned int cascade_irq = mpic_get_one_irq(mpic, regs);
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq, regs);
+ desc->chip->eoi(irq);
}
static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
@@ -514,21 +457,20 @@ static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
int nmi_irq;
pswitch = of_find_node_by_name(NULL, "programmer-switch");
- if (pswitch && pswitch->n_intrs) {
- nmi_irq = pswitch->intrs[0].line;
- mpic_irq_set_priority(nmi_irq, 9);
- setup_irq(nmi_irq, &xmon_action);
+ if (pswitch) {
+ nmi_irq = irq_of_parse_and_map(pswitch, 0);
+ if (nmi_irq != NO_IRQ) {
+ mpic_irq_set_priority(nmi_irq, 9);
+ setup_irq(nmi_irq, &xmon_action);
+ }
+ of_node_put(pswitch);
}
- of_node_put(pswitch);
#endif /* defined(CONFIG_XMON) && defined(CONFIG_PPC32) */
}
static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
int master)
{
- unsigned char senses[128];
- int offset = master ? 0 : 128;
- int count = master ? 128 : 124;
const char *name = master ? " MPIC 1 " : " MPIC 2 ";
struct resource r;
struct mpic *mpic;
@@ -541,8 +483,6 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0);
- prom_get_irq_senses(senses, offset, offset + count);
-
flags |= MPIC_WANTS_RESET;
if (get_property(np, "big-endian", NULL))
flags |= MPIC_BIG_ENDIAN;
@@ -553,8 +493,7 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
if (master && (flags & MPIC_BIG_ENDIAN))
flags |= MPIC_BROKEN_U3;
- mpic = mpic_alloc(r.start, flags, 0, offset, count, master ? 252 : 0,
- senses, count, name);
+ mpic = mpic_alloc(np, r.start, flags, 0, 0, name);
if (mpic == NULL)
return NULL;
@@ -567,6 +506,7 @@ static int __init pmac_pic_probe_mpic(void)
{
struct mpic *mpic1, *mpic2;
struct device_node *np, *master = NULL, *slave = NULL;
+ unsigned int cascade;
/* We can have up to 2 MPICs cascaded */
for (np = NULL; (np = of_find_node_by_type(np, "open-pic"))
@@ -603,8 +543,15 @@ static int __init pmac_pic_probe_mpic(void)
of_node_put(master);
/* No slave, let's go out */
- if (slave == NULL || slave->n_intrs < 1)
+ if (slave == NULL)
+ return 0;
+
+ /* Get/Map slave interrupt */
+ cascade = irq_of_parse_and_map(slave, 0);
+ if (cascade == NO_IRQ) {
+ printk(KERN_ERR "Failed to map cascade IRQ\n");
return 0;
+ }
mpic2 = pmac_setup_one_mpic(slave, 0);
if (mpic2 == NULL) {
@@ -612,7 +559,8 @@ static int __init pmac_pic_probe_mpic(void)
of_node_put(slave);
return 0;
}
- mpic_setup_cascade(slave->intrs[0].line, pmac_u3_cascade, mpic2);
+ set_irq_data(cascade, mpic2);
+ set_irq_chained_handler(cascade, pmac_u3_cascade);
of_node_put(slave);
return 0;
@@ -621,6 +569,19 @@ static int __init pmac_pic_probe_mpic(void)
void __init pmac_pic_init(void)
{
+ unsigned int flags = 0;
+
+ /* We configure the OF parsing based on our oldworld vs. newworld
+ * platform type and wether we were booted by BootX.
+ */
+#ifdef CONFIG_PPC32
+ if (!pmac_newworld)
+ flags |= OF_IMAP_OLDWORLD_MAC;
+ if (get_property(of_chosen, "linux,bootx", NULL) != NULL)
+ flags |= OF_IMAP_NO_PHANDLE;
+ of_irq_map_init(flags);
+#endif /* CONFIG_PPC_32 */
+
/* We first try to detect Apple's new Core99 chipset, since mac-io
* is quite different on those machines and contains an IBM MPIC2.
*/
@@ -643,6 +604,7 @@ unsigned long sleep_save_mask[2];
/* This used to be passed by the PMU driver but that link got
* broken with the new driver model. We use this tweak for now...
+ * We really want to do things differently though...
*/
static int pmacpic_find_viaint(void)
{
@@ -656,7 +618,7 @@ static int pmacpic_find_viaint(void)
np = of_find_node_by_name(NULL, "via-pmu");
if (np == NULL)
goto not_found;
- viaint = np->intrs[0].line;
+ viaint = irq_of_parse_and_map(np, 0);;
#endif /* CONFIG_ADB_PMU */
not_found:
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
index 21c7b0f8f329..94e7b24b840b 100644
--- a/arch/powerpc/platforms/powermac/pmac.h
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -12,6 +12,8 @@
struct rtc_time;
+extern int pmac_newworld;
+
extern long pmac_time_init(void);
extern unsigned long pmac_get_boot_time(void);
extern void pmac_get_rtc_time(struct rtc_time *);
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 8654b5f07836..31a9da769fa2 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -613,9 +613,6 @@ static void __init pmac_init_early(void)
udbg_adb_init(!!strstr(cmd_line, "btextdbg"));
#ifdef CONFIG_PPC64
- /* Setup interrupt mapping options */
- ppc64_interrupt_controller = IC_OPEN_PIC;
-
iommu_init_early_dart();
#endif
}
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 9639c66b453d..9df783088b61 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -72,32 +72,62 @@ static irqreturn_t ras_error_interrupt(int irq, void *dev_id,
/* #define DEBUG */
-static void request_ras_irqs(struct device_node *np, char *propname,
+
+static void request_ras_irqs(struct device_node *np,
irqreturn_t (*handler)(int, void *, struct pt_regs *),
const char *name)
{
- unsigned int *ireg, len, i;
- int virq, n_intr;
-
- ireg = (unsigned int *)get_property(np, propname, &len);
- if (ireg == NULL)
- return;
- n_intr = prom_n_intr_cells(np);
- len /= n_intr * sizeof(*ireg);
-
- for (i = 0; i < len; i++) {
- virq = virt_irq_create_mapping(*ireg);
- if (virq == NO_IRQ) {
- printk(KERN_ERR "Unable to allocate interrupt "
- "number for %s\n", np->full_name);
- return;
+ int i, index, count = 0;
+ struct of_irq oirq;
+ u32 *opicprop;
+ unsigned int opicplen;
+ unsigned int virqs[16];
+
+ /* Check for obsolete "open-pic-interrupt" property. If present, then
+ * map those interrupts using the default interrupt host and default
+ * trigger
+ */
+ opicprop = (u32 *)get_property(np, "open-pic-interrupt", &opicplen);
+ if (opicprop) {
+ opicplen /= sizeof(u32);
+ for (i = 0; i < opicplen; i++) {
+ if (count > 15)
+ break;
+ virqs[count] = irq_create_mapping(NULL, *(opicprop++),
+ IRQ_TYPE_NONE);
+ if (virqs[count] == NO_IRQ)
+ printk(KERN_ERR "Unable to allocate interrupt "
+ "number for %s\n", np->full_name);
+ else
+ count++;
+
}
- if (request_irq(irq_offset_up(virq), handler, 0, name, NULL)) {
+ }
+ /* Else use normal interrupt tree parsing */
+ else {
+ /* First try to do a proper OF tree parsing */
+ for (index = 0; of_irq_map_one(np, index, &oirq) == 0;
+ index++) {
+ if (count > 15)
+ break;
+ virqs[count] = irq_create_of_mapping(oirq.controller,
+ oirq.specifier,
+ oirq.size);
+ if (virqs[count] == NO_IRQ)
+ printk(KERN_ERR "Unable to allocate interrupt "
+ "number for %s\n", np->full_name);
+ else
+ count++;
+ }
+ }
+
+ /* Now request them */
+ for (i = 0; i < count; i++) {
+ if (request_irq(virqs[i], handler, 0, name, NULL)) {
printk(KERN_ERR "Unable to request interrupt %d for "
- "%s\n", irq_offset_up(virq), np->full_name);
+ "%s\n", virqs[i], np->full_name);
return;
}
- ireg += n_intr;
}
}
@@ -115,20 +145,14 @@ static int __init init_ras_IRQ(void)
/* Internal Errors */
np = of_find_node_by_path("/event-sources/internal-errors");
if (np != NULL) {
- request_ras_irqs(np, "open-pic-interrupt", ras_error_interrupt,
- "RAS_ERROR");
- request_ras_irqs(np, "interrupts", ras_error_interrupt,
- "RAS_ERROR");
+ request_ras_irqs(np, ras_error_interrupt, "RAS_ERROR");
of_node_put(np);
}
/* EPOW Events */
np = of_find_node_by_path("/event-sources/epow-events");
if (np != NULL) {
- request_ras_irqs(np, "open-pic-interrupt", ras_epow_interrupt,
- "RAS_EPOW");
- request_ras_irqs(np, "interrupts", ras_epow_interrupt,
- "RAS_EPOW");
+ request_ras_irqs(np, ras_epow_interrupt, "RAS_EPOW");
of_node_put(np);
}
@@ -162,7 +186,7 @@ ras_epow_interrupt(int irq, void *dev_id, struct pt_regs * regs)
status = rtas_call(ras_check_exception_token, 6, 1, NULL,
RAS_VECTOR_OFFSET,
- virt_irq_to_real(irq_offset_down(irq)),
+ irq_map[irq].hwirq,
RTAS_EPOW_WARNING | RTAS_POWERMGM_EVENTS,
critical, __pa(&ras_log_buf),
rtas_get_error_log_max());
@@ -198,7 +222,7 @@ ras_error_interrupt(int irq, void *dev_id, struct pt_regs * regs)
status = rtas_call(ras_check_exception_token, 6, 1, NULL,
RAS_VECTOR_OFFSET,
- virt_irq_to_real(irq_offset_down(irq)),
+ irq_map[irq].hwirq,
RTAS_INTERNAL_ERROR, 1 /*Time Critical */,
__pa(&ras_log_buf),
rtas_get_error_log_max());
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 999509d28af8..54a52437265c 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -76,6 +76,9 @@
#define DBG(fmt...)
#endif
+/* move those away to a .h */
+extern void smp_init_pseries_mpic(void);
+extern void smp_init_pseries_xics(void);
extern void find_udbg_vterm(void);
int fwnmi_active; /* TRUE if an FWNMI handler is present */
@@ -83,7 +86,7 @@ int fwnmi_active; /* TRUE if an FWNMI handler is present */
static void pseries_shared_idle_sleep(void);
static void pseries_dedicated_idle_sleep(void);
-struct mpic *pSeries_mpic;
+static struct device_node *pSeries_mpic_node;
static void pSeries_show_cpuinfo(struct seq_file *m)
{
@@ -118,63 +121,92 @@ static void __init fwnmi_init(void)
fwnmi_active = 1;
}
-static void __init pSeries_init_mpic(void)
+void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
{
- unsigned int *addrp;
- struct device_node *np;
- unsigned long intack = 0;
-
- /* All ISUs are setup, complete initialization */
- mpic_init(pSeries_mpic);
-
- /* Check what kind of cascade ACK we have */
- if (!(np = of_find_node_by_name(NULL, "pci"))
- || !(addrp = (unsigned int *)
- get_property(np, "8259-interrupt-acknowledge", NULL)))
- printk(KERN_ERR "Cannot find pci to get ack address\n");
- else
- intack = addrp[prom_n_addr_cells(np)-1];
- of_node_put(np);
-
- /* Setup the legacy interrupts & controller */
- i8259_init(intack, 0);
-
- /* Hook cascade to mpic */
- mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL);
+ unsigned int cascade_irq = i8259_irq(regs);
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq, regs);
+ desc->chip->eoi(irq);
}
-static void __init pSeries_setup_mpic(void)
+static void __init pseries_mpic_init_IRQ(void)
{
+ struct device_node *np, *old, *cascade = NULL;
+ unsigned int *addrp;
+ unsigned long intack = 0;
unsigned int *opprop;
unsigned long openpic_addr = 0;
- unsigned char senses[NR_IRQS - NUM_ISA_INTERRUPTS];
- struct device_node *root;
- int irq_count;
+ unsigned int cascade_irq;
+ int naddr, n, i, opplen;
+ struct mpic *mpic;
- /* Find the Open PIC if present */
- root = of_find_node_by_path("/");
- opprop = (unsigned int *) get_property(root, "platform-open-pic", NULL);
+ np = of_find_node_by_path("/");
+ naddr = prom_n_addr_cells(np);
+ opprop = (unsigned int *) get_property(np, "platform-open-pic", &opplen);
if (opprop != 0) {
- int n = prom_n_addr_cells(root);
-
- for (openpic_addr = 0; n > 0; --n)
- openpic_addr = (openpic_addr << 32) + *opprop++;
+ openpic_addr = of_read_number(opprop, naddr);
printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
}
- of_node_put(root);
+ of_node_put(np);
BUG_ON(openpic_addr == 0);
- /* Get the sense values from OF */
- prom_get_irq_senses(senses, NUM_ISA_INTERRUPTS, NR_IRQS);
-
/* Setup the openpic driver */
- irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */
- pSeries_mpic = mpic_alloc(openpic_addr, MPIC_PRIMARY,
- 16, 16, irq_count, /* isu size, irq offset, irq count */
- NR_IRQS - 4, /* ipi offset */
- senses, irq_count, /* sense & sense size */
- " MPIC ");
+ mpic = mpic_alloc(pSeries_mpic_node, openpic_addr,
+ MPIC_PRIMARY,
+ 16, 250, /* isu size, irq count */
+ " MPIC ");
+ BUG_ON(mpic == NULL);
+
+ /* Add ISUs */
+ opplen /= sizeof(u32);
+ for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
+ unsigned long isuaddr = of_read_number(opprop + i, naddr);
+ mpic_assign_isu(mpic, n, isuaddr);
+ }
+
+ /* All ISUs are setup, complete initialization */
+ mpic_init(mpic);
+
+ /* Look for cascade */
+ for_each_node_by_type(np, "interrupt-controller")
+ if (device_is_compatible(np, "chrp,iic")) {
+ cascade = np;
+ break;
+ }
+ if (cascade == NULL)
+ return;
+
+ cascade_irq = irq_of_parse_and_map(cascade, 0);
+ if (cascade == NO_IRQ) {
+ printk(KERN_ERR "xics: failed to map cascade interrupt");
+ return;
+ }
+
+ /* Check ACK type */
+ for (old = of_node_get(cascade); old != NULL ; old = np) {
+ np = of_get_parent(old);
+ of_node_put(old);
+ if (np == NULL)
+ break;
+ if (strcmp(np->name, "pci") != 0)
+ continue;
+ addrp = (u32 *)get_property(np, "8259-interrupt-acknowledge",
+ NULL);
+ if (addrp == NULL)
+ continue;
+ naddr = prom_n_addr_cells(np);
+ intack = addrp[naddr-1];
+ if (naddr > 1)
+ intack |= ((unsigned long)addrp[naddr-2]) << 32;
+ }
+ if (intack)
+ printk(KERN_DEBUG "mpic: PCI 8259 intack at 0x%016lx\n",
+ intack);
+ i8259_init(cascade, intack);
+ of_node_put(cascade);
+ set_irq_chained_handler(cascade_irq, pseries_8259_cascade);
}
static void pseries_lpar_enable_pmcs(void)
@@ -192,23 +224,67 @@ static void pseries_lpar_enable_pmcs(void)
get_lppaca()->pmcregs_in_use = 1;
}
-static void __init pSeries_setup_arch(void)
+#ifdef CONFIG_KEXEC
+static void pseries_kexec_cpu_down_mpic(int crash_shutdown, int secondary)
{
- /* Fixup ppc_md depending on the type of interrupt controller */
- if (ppc64_interrupt_controller == IC_OPEN_PIC) {
- ppc_md.init_IRQ = pSeries_init_mpic;
- ppc_md.get_irq = mpic_get_irq;
- /* Allocate the mpic now, so that find_and_init_phbs() can
- * fill the ISUs */
- pSeries_setup_mpic();
- } else {
- ppc_md.init_IRQ = xics_init_IRQ;
- ppc_md.get_irq = xics_get_irq;
+ mpic_teardown_this_cpu(secondary);
+}
+
+static void pseries_kexec_cpu_down_xics(int crash_shutdown, int secondary)
+{
+ /* Don't risk a hypervisor call if we're crashing */
+ if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) {
+ unsigned long vpa = __pa(get_lppaca());
+
+ if (unregister_vpa(hard_smp_processor_id(), vpa)) {
+ printk("VPA deregistration of cpu %u (hw_cpu_id %d) "
+ "failed\n", smp_processor_id(),
+ hard_smp_processor_id());
+ }
}
+ xics_teardown_cpu(secondary);
+}
+#endif /* CONFIG_KEXEC */
+static void __init pseries_discover_pic(void)
+{
+ struct device_node *np;
+ char *typep;
+
+ for (np = NULL; (np = of_find_node_by_name(np,
+ "interrupt-controller"));) {
+ typep = (char *)get_property(np, "compatible", NULL);
+ if (strstr(typep, "open-pic")) {
+ pSeries_mpic_node = of_node_get(np);
+ ppc_md.init_IRQ = pseries_mpic_init_IRQ;
+ ppc_md.get_irq = mpic_get_irq;
+#ifdef CONFIG_KEXEC
+ ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic;
+#endif
+#ifdef CONFIG_SMP
+ smp_init_pseries_mpic();
+#endif
+ return;
+ } else if (strstr(typep, "ppc-xicp")) {
+ ppc_md.init_IRQ = xics_init_IRQ;
+#ifdef CONFIG_KEXEC
+ ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics;
+#endif
#ifdef CONFIG_SMP
- smp_init_pSeries();
+ smp_init_pseries_xics();
#endif
+ return;
+ }
+ }
+ printk(KERN_ERR "pSeries_discover_pic: failed to recognize"
+ " interrupt-controller\n");
+}
+
+static void __init pSeries_setup_arch(void)
+{
+ /* Discover PIC type and setup ppc_md accordingly */
+ pseries_discover_pic();
+
/* openpic global configuration register (64-bit format). */
/* openpic Interrupt Source Unit pointer (64-bit format). */
/* python0 facility area (mmio) (64-bit format) REAL address. */
@@ -260,41 +336,11 @@ static int __init pSeries_init_panel(void)
}
arch_initcall(pSeries_init_panel);
-static void __init pSeries_discover_pic(void)
-{
- struct device_node *np;
- char *typep;
-
- /*
- * Setup interrupt mapping options that are needed for finish_device_tree
- * to properly parse the OF interrupt tree & do the virtual irq mapping
- */
- __irq_offset_value = NUM_ISA_INTERRUPTS;
- ppc64_interrupt_controller = IC_INVALID;
- for (np = NULL; (np = of_find_node_by_name(np, "interrupt-controller"));) {
- typep = (char *)get_property(np, "compatible", NULL);
- if (strstr(typep, "open-pic")) {
- ppc64_interrupt_controller = IC_OPEN_PIC;
- break;
- } else if (strstr(typep, "ppc-xicp")) {
- ppc64_interrupt_controller = IC_PPC_XIC;
- break;
- }
- }
- if (ppc64_interrupt_controller == IC_INVALID)
- printk("pSeries_discover_pic: failed to recognize"
- " interrupt-controller\n");
-
-}
-
static void pSeries_mach_cpu_die(void)
{
local_irq_disable();
idle_task_exit();
- /* Some hardware requires clearing the CPPR, while other hardware does not
- * it is safe either way
- */
- pSeriesLP_cppr_info(0, 0);
+ xics_teardown_cpu(0);
rtas_stop_self();
/* Should never get here... */
BUG();
@@ -332,8 +378,6 @@ static void __init pSeries_init_early(void)
iommu_init_early_pSeries();
- pSeries_discover_pic();
-
DBG(" <- pSeries_init_early()\n");
}
@@ -505,27 +549,6 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus)
return PCI_PROBE_NORMAL;
}
-#ifdef CONFIG_KEXEC
-static void pseries_kexec_cpu_down(int crash_shutdown, int secondary)
-{
- /* Don't risk a hypervisor call if we're crashing */
- if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) {
- unsigned long vpa = __pa(get_lppaca());
-
- if (unregister_vpa(hard_smp_processor_id(), vpa)) {
- printk("VPA deregistration of cpu %u (hw_cpu_id %d) "
- "failed\n", smp_processor_id(),
- hard_smp_processor_id());
- }
- }
-
- if (ppc64_interrupt_controller == IC_OPEN_PIC)
- mpic_teardown_this_cpu(secondary);
- else
- xics_teardown_cpu(secondary);
-}
-#endif
-
define_machine(pseries) {
.name = "pSeries",
.probe = pSeries_probe,
@@ -550,7 +573,6 @@ define_machine(pseries) {
.system_reset_exception = pSeries_system_reset_exception,
.machine_check_exception = pSeries_machine_check_exception,
#ifdef CONFIG_KEXEC
- .kexec_cpu_down = pseries_kexec_cpu_down,
.machine_kexec = default_machine_kexec,
.machine_kexec_prepare = default_machine_kexec_prepare,
.machine_crash_shutdown = default_machine_crash_shutdown,
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 4ad144df49c2..ac61098ff401 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -416,27 +416,12 @@ static struct smp_ops_t pSeries_xics_smp_ops = {
#endif
/* This is called very early */
-void __init smp_init_pSeries(void)
+static void __init smp_init_pseries(void)
{
int i;
DBG(" -> smp_init_pSeries()\n");
- switch (ppc64_interrupt_controller) {
-#ifdef CONFIG_MPIC
- case IC_OPEN_PIC:
- smp_ops = &pSeries_mpic_smp_ops;
- break;
-#endif
-#ifdef CONFIG_XICS
- case IC_PPC_XIC:
- smp_ops = &pSeries_xics_smp_ops;
- break;
-#endif
- default:
- panic("Invalid interrupt controller");
- }
-
#ifdef CONFIG_HOTPLUG_CPU
smp_ops->cpu_disable = pSeries_cpu_disable;
smp_ops->cpu_die = pSeries_cpu_die;
@@ -471,3 +456,18 @@ void __init smp_init_pSeries(void)
DBG(" <- smp_init_pSeries()\n");
}
+#ifdef CONFIG_MPIC
+void __init smp_init_pseries_mpic(void)
+{
+ smp_ops = &pSeries_mpic_smp_ops;
+
+ smp_init_pseries();
+}
+#endif
+
+void __init smp_init_pseries_xics(void)
+{
+ smp_ops = &pSeries_xics_smp_ops;
+
+ smp_init_pseries();
+}
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 2ffebe31cb2d..716972aa9777 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -8,6 +8,9 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+
+#undef DEBUG
+
#include <linux/types.h>
#include <linux/threads.h>
#include <linux/kernel.h>
@@ -19,6 +22,7 @@
#include <linux/gfp.h>
#include <linux/radix-tree.h>
#include <linux/cpu.h>
+
#include <asm/firmware.h>
#include <asm/prom.h>
#include <asm/io.h>
@@ -31,26 +35,6 @@
#include "xics.h"
-static unsigned int xics_startup(unsigned int irq);
-static void xics_enable_irq(unsigned int irq);
-static void xics_disable_irq(unsigned int irq);
-static void xics_mask_and_ack_irq(unsigned int irq);
-static void xics_end_irq(unsigned int irq);
-static void xics_set_affinity(unsigned int irq_nr, cpumask_t cpumask);
-
-static struct hw_interrupt_type xics_pic = {
- .typename = " XICS ",
- .startup = xics_startup,
- .enable = xics_enable_irq,
- .disable = xics_disable_irq,
- .ack = xics_mask_and_ack_irq,
- .end = xics_end_irq,
- .set_affinity = xics_set_affinity
-};
-
-/* This is used to map real irq numbers to virtual */
-static struct radix_tree_root irq_map = RADIX_TREE_INIT(GFP_ATOMIC);
-
#define XICS_IPI 2
#define XICS_IRQ_SPURIOUS 0
@@ -81,12 +65,12 @@ struct xics_ipl {
static struct xics_ipl __iomem *xics_per_cpu[NR_CPUS];
-static int xics_irq_8259_cascade = 0;
-static int xics_irq_8259_cascade_real = 0;
static unsigned int default_server = 0xFF;
static unsigned int default_distrib_server = 0;
static unsigned int interrupt_server_size = 8;
+static struct irq_host *xics_host;
+
/*
* XICS only has a single IPI, so encode the messages per CPU
*/
@@ -98,48 +82,34 @@ static int ibm_set_xive;
static int ibm_int_on;
static int ibm_int_off;
-typedef struct {
- int (*xirr_info_get)(int cpu);
- void (*xirr_info_set)(int cpu, int val);
- void (*cppr_info)(int cpu, u8 val);
- void (*qirr_info)(int cpu, u8 val);
-} xics_ops;
+/* Direct HW low level accessors */
-/* SMP */
-static int pSeries_xirr_info_get(int n_cpu)
+static inline unsigned int direct_xirr_info_get(int n_cpu)
{
return in_be32(&xics_per_cpu[n_cpu]->xirr.word);
}
-static void pSeries_xirr_info_set(int n_cpu, int value)
+static inline void direct_xirr_info_set(int n_cpu, int value)
{
out_be32(&xics_per_cpu[n_cpu]->xirr.word, value);
}
-static void pSeries_cppr_info(int n_cpu, u8 value)
+static inline void direct_cppr_info(int n_cpu, u8 value)
{
out_8(&xics_per_cpu[n_cpu]->xirr.bytes[0], value);
}
-static void pSeries_qirr_info(int n_cpu, u8 value)
+static inline void direct_qirr_info(int n_cpu, u8 value)
{
out_8(&xics_per_cpu[n_cpu]->qirr.bytes[0], value);
}
-static xics_ops pSeries_ops = {
- pSeries_xirr_info_get,
- pSeries_xirr_info_set,
- pSeries_cppr_info,
- pSeries_qirr_info
-};
-static xics_ops *ops = &pSeries_ops;
+/* LPAR low level accessors */
-/* LPAR */
-
static inline long plpar_eoi(unsigned long xirr)
{
return plpar_hcall_norets(H_EOI, xirr);
@@ -161,7 +131,7 @@ static inline long plpar_xirr(unsigned long *xirr_ret)
return plpar_hcall(H_XIRR, 0, 0, 0, 0, xirr_ret, &dummy, &dummy);
}
-static int pSeriesLP_xirr_info_get(int n_cpu)
+static inline unsigned int lpar_xirr_info_get(int n_cpu)
{
unsigned long lpar_rc;
unsigned long return_value;
@@ -169,10 +139,10 @@ static int pSeriesLP_xirr_info_get(int n_cpu)
lpar_rc = plpar_xirr(&return_value);
if (lpar_rc != H_SUCCESS)
panic(" bad return code xirr - rc = %lx \n", lpar_rc);
- return (int)return_value;
+ return (unsigned int)return_value;
}
-static void pSeriesLP_xirr_info_set(int n_cpu, int value)
+static inline void lpar_xirr_info_set(int n_cpu, int value)
{
unsigned long lpar_rc;
unsigned long val64 = value & 0xffffffff;
@@ -183,7 +153,7 @@ static void pSeriesLP_xirr_info_set(int n_cpu, int value)
val64);
}
-void pSeriesLP_cppr_info(int n_cpu, u8 value)
+static inline void lpar_cppr_info(int n_cpu, u8 value)
{
unsigned long lpar_rc;
@@ -192,7 +162,7 @@ void pSeriesLP_cppr_info(int n_cpu, u8 value)
panic("bad return code cppr - rc = %lx\n", lpar_rc);
}
-static void pSeriesLP_qirr_info(int n_cpu , u8 value)
+static inline void lpar_qirr_info(int n_cpu , u8 value)
{
unsigned long lpar_rc;
@@ -201,43 +171,16 @@ static void pSeriesLP_qirr_info(int n_cpu , u8 value)
panic("bad return code qirr - rc = %lx\n", lpar_rc);
}
-xics_ops pSeriesLP_ops = {
- pSeriesLP_xirr_info_get,
- pSeriesLP_xirr_info_set,
- pSeriesLP_cppr_info,
- pSeriesLP_qirr_info
-};
-
-static unsigned int xics_startup(unsigned int virq)
-{
- unsigned int irq;
-
- irq = irq_offset_down(virq);
- if (radix_tree_insert(&irq_map, virt_irq_to_real(irq),
- &virt_irq_to_real_map[irq]) == -ENOMEM)
- printk(KERN_CRIT "Out of memory creating real -> virtual"
- " IRQ mapping for irq %u (real 0x%x)\n",
- virq, virt_irq_to_real(irq));
- xics_enable_irq(virq);
- return 0; /* return value is ignored */
-}
-static unsigned int real_irq_to_virt(unsigned int real_irq)
-{
- unsigned int *ptr;
+/* High level handlers and init code */
- ptr = radix_tree_lookup(&irq_map, real_irq);
- if (ptr == NULL)
- return NO_IRQ;
- return ptr - virt_irq_to_real_map;
-}
#ifdef CONFIG_SMP
-static int get_irq_server(unsigned int irq)
+static int get_irq_server(unsigned int virq)
{
unsigned int server;
/* For the moment only implement delivery to all cpus or one cpu */
- cpumask_t cpumask = irq_desc[irq].affinity;
+ cpumask_t cpumask = irq_desc[virq].affinity;
cpumask_t tmp = CPU_MASK_NONE;
if (!distribute_irqs)
@@ -258,23 +201,28 @@ static int get_irq_server(unsigned int irq)
}
#else
-static int get_irq_server(unsigned int irq)
+static int get_irq_server(unsigned int virq)
{
return default_server;
}
#endif
-static void xics_enable_irq(unsigned int virq)
+
+static void xics_unmask_irq(unsigned int virq)
{
unsigned int irq;
int call_status;
unsigned int server;
- irq = virt_irq_to_real(irq_offset_down(virq));
- if (irq == XICS_IPI)
+ pr_debug("xics: unmask virq %d\n", virq);
+
+ irq = (unsigned int)irq_map[virq].hwirq;
+ pr_debug(" -> map to hwirq 0x%x\n", irq);
+ if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
return;
server = get_irq_server(virq);
+
call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server,
DEFAULT_PRIORITY);
if (call_status != 0) {
@@ -293,7 +241,7 @@ static void xics_enable_irq(unsigned int virq)
}
}
-static void xics_disable_real_irq(unsigned int irq)
+static void xics_mask_real_irq(unsigned int irq)
{
int call_status;
unsigned int server;
@@ -318,75 +266,86 @@ static void xics_disable_real_irq(unsigned int irq)
}
}
-static void xics_disable_irq(unsigned int virq)
+static void xics_mask_irq(unsigned int virq)
{
unsigned int irq;
- irq = virt_irq_to_real(irq_offset_down(virq));
- xics_disable_real_irq(irq);
+ pr_debug("xics: mask virq %d\n", virq);
+
+ irq = (unsigned int)irq_map[virq].hwirq;
+ if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
+ return;
+ xics_mask_real_irq(irq);
+}
+
+static unsigned int xics_startup(unsigned int virq)
+{
+ unsigned int irq;
+
+ /* force a reverse mapping of the interrupt so it gets in the cache */
+ irq = (unsigned int)irq_map[virq].hwirq;
+ irq_radix_revmap(xics_host, irq);
+
+ /* unmask it */
+ xics_unmask_irq(virq);
+ return 0;
}
-static void xics_end_irq(unsigned int irq)
+static void xics_eoi_direct(unsigned int virq)
{
int cpu = smp_processor_id();
+ unsigned int irq = (unsigned int)irq_map[virq].hwirq;
iosync();
- ops->xirr_info_set(cpu, ((0xff << 24) |
- (virt_irq_to_real(irq_offset_down(irq)))));
-
+ direct_xirr_info_set(cpu, (0xff << 24) | irq);
}
-static void xics_mask_and_ack_irq(unsigned int irq)
+
+static void xics_eoi_lpar(unsigned int virq)
{
int cpu = smp_processor_id();
+ unsigned int irq = (unsigned int)irq_map[virq].hwirq;
- if (irq < irq_offset_value()) {
- i8259_pic.ack(irq);
- iosync();
- ops->xirr_info_set(cpu, ((0xff<<24) |
- xics_irq_8259_cascade_real));
- iosync();
- }
+ iosync();
+ lpar_xirr_info_set(cpu, (0xff << 24) | irq);
}
-int xics_get_irq(struct pt_regs *regs)
+static inline unsigned int xics_remap_irq(unsigned int vec)
{
- unsigned int cpu = smp_processor_id();
- unsigned int vec;
- int irq;
+ unsigned int irq;
- vec = ops->xirr_info_get(cpu);
- /* (vec >> 24) == old priority */
vec &= 0x00ffffff;
- /* for sanity, this had better be < NR_IRQS - 16 */
- if (vec == xics_irq_8259_cascade_real) {
- irq = i8259_irq(regs);
- xics_end_irq(irq_offset_up(xics_irq_8259_cascade));
- } else if (vec == XICS_IRQ_SPURIOUS) {
- irq = -1;
- } else {
- irq = real_irq_to_virt(vec);
- if (irq == NO_IRQ)
- irq = real_irq_to_virt_slowpath(vec);
- if (irq == NO_IRQ) {
- printk(KERN_ERR "Interrupt %u (real) is invalid,"
- " disabling it.\n", vec);
- xics_disable_real_irq(vec);
- } else
- irq = irq_offset_up(irq);
- }
- return irq;
+ if (vec == XICS_IRQ_SPURIOUS)
+ return NO_IRQ;
+ irq = irq_radix_revmap(xics_host, vec);
+ if (likely(irq != NO_IRQ))
+ return irq;
+
+ printk(KERN_ERR "Interrupt %u (real) is invalid,"
+ " disabling it.\n", vec);
+ xics_mask_real_irq(vec);
+ return NO_IRQ;
}
-#ifdef CONFIG_SMP
+static unsigned int xics_get_irq_direct(struct pt_regs *regs)
+{
+ unsigned int cpu = smp_processor_id();
-static irqreturn_t xics_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
+ return xics_remap_irq(direct_xirr_info_get(cpu));
+}
+
+static unsigned int xics_get_irq_lpar(struct pt_regs *regs)
{
- int cpu = smp_processor_id();
+ unsigned int cpu = smp_processor_id();
+
+ return xics_remap_irq(lpar_xirr_info_get(cpu));
+}
- ops->qirr_info(cpu, 0xff);
+#ifdef CONFIG_SMP
+static irqreturn_t xics_ipi_dispatch(int cpu, struct pt_regs *regs)
+{
WARN_ON(cpu_is_offline(cpu));
while (xics_ipi_message[cpu].value) {
@@ -418,18 +377,88 @@ static irqreturn_t xics_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
return IRQ_HANDLED;
}
+static irqreturn_t xics_ipi_action_direct(int irq, void *dev_id, struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+
+ direct_qirr_info(cpu, 0xff);
+
+ return xics_ipi_dispatch(cpu, regs);
+}
+
+static irqreturn_t xics_ipi_action_lpar(int irq, void *dev_id, struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+
+ lpar_qirr_info(cpu, 0xff);
+
+ return xics_ipi_dispatch(cpu, regs);
+}
+
void xics_cause_IPI(int cpu)
{
- ops->qirr_info(cpu, IPI_PRIORITY);
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ lpar_qirr_info(cpu, IPI_PRIORITY);
+ else
+ direct_qirr_info(cpu, IPI_PRIORITY);
}
+
#endif /* CONFIG_SMP */
+static void xics_set_cpu_priority(int cpu, unsigned char cppr)
+{
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ lpar_cppr_info(cpu, cppr);
+ else
+ direct_cppr_info(cpu, cppr);
+ iosync();
+}
+
+static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
+{
+ unsigned int irq;
+ int status;
+ int xics_status[2];
+ unsigned long newmask;
+ cpumask_t tmp = CPU_MASK_NONE;
+
+ irq = (unsigned int)irq_map[virq].hwirq;
+ if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
+ return;
+
+ status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
+
+ if (status) {
+ printk(KERN_ERR "xics_set_affinity: irq=%u ibm,get-xive "
+ "returns %d\n", irq, status);
+ return;
+ }
+
+ /* For the moment only implement delivery to all cpus or one cpu */
+ if (cpus_equal(cpumask, CPU_MASK_ALL)) {
+ newmask = default_distrib_server;
+ } else {
+ cpus_and(tmp, cpu_online_map, cpumask);
+ if (cpus_empty(tmp))
+ return;
+ newmask = get_hard_smp_processor_id(first_cpu(tmp));
+ }
+
+ status = rtas_call(ibm_set_xive, 3, 1, NULL,
+ irq, newmask, xics_status[1]);
+
+ if (status) {
+ printk(KERN_ERR "xics_set_affinity: irq=%u ibm,set-xive "
+ "returns %d\n", irq, status);
+ return;
+ }
+}
+
void xics_setup_cpu(void)
{
int cpu = smp_processor_id();
- ops->cppr_info(cpu, 0xff);
- iosync();
+ xics_set_cpu_priority(cpu, 0xff);
/*
* Put the calling processor into the GIQ. This is really only
@@ -442,72 +471,266 @@ void xics_setup_cpu(void)
(1UL << interrupt_server_size) - 1 - default_distrib_server, 1);
}
-void xics_init_IRQ(void)
+
+static struct irq_chip xics_pic_direct = {
+ .typename = " XICS ",
+ .startup = xics_startup,
+ .mask = xics_mask_irq,
+ .unmask = xics_unmask_irq,
+ .eoi = xics_eoi_direct,
+ .set_affinity = xics_set_affinity
+};
+
+
+static struct irq_chip xics_pic_lpar = {
+ .typename = " XICS ",
+ .startup = xics_startup,
+ .mask = xics_mask_irq,
+ .unmask = xics_unmask_irq,
+ .eoi = xics_eoi_lpar,
+ .set_affinity = xics_set_affinity
+};
+
+
+static int xics_host_match(struct irq_host *h, struct device_node *node)
+{
+ /* IBM machines have interrupt parents of various funky types for things
+ * like vdevices, events, etc... The trick we use here is to match
+ * everything here except the legacy 8259 which is compatible "chrp,iic"
+ */
+ return !device_is_compatible(node, "chrp,iic");
+}
+
+static int xics_host_map_direct(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw, unsigned int flags)
+{
+ unsigned int sense = flags & IRQ_TYPE_SENSE_MASK;
+
+ pr_debug("xics: map_direct virq %d, hwirq 0x%lx, flags: 0x%x\n",
+ virq, hw, flags);
+
+ if (sense && sense != IRQ_TYPE_LEVEL_LOW)
+ printk(KERN_WARNING "xics: using unsupported sense 0x%x"
+ " for irq %d (h: 0x%lx)\n", flags, virq, hw);
+
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(virq, &xics_pic_direct, handle_fasteoi_irq);
+ return 0;
+}
+
+static int xics_host_map_lpar(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw, unsigned int flags)
+{
+ unsigned int sense = flags & IRQ_TYPE_SENSE_MASK;
+
+ pr_debug("xics: map_lpar virq %d, hwirq 0x%lx, flags: 0x%x\n",
+ virq, hw, flags);
+
+ if (sense && sense != IRQ_TYPE_LEVEL_LOW)
+ printk(KERN_WARNING "xics: using unsupported sense 0x%x"
+ " for irq %d (h: 0x%lx)\n", flags, virq, hw);
+
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(virq, &xics_pic_lpar, handle_fasteoi_irq);
+ return 0;
+}
+
+static int xics_host_xlate(struct irq_host *h, struct device_node *ct,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+
+{
+ /* Current xics implementation translates everything
+ * to level. It is not technically right for MSIs but this
+ * is irrelevant at this point. We might get smarter in the future
+ */
+ *out_hwirq = intspec[0];
+ *out_flags = IRQ_TYPE_LEVEL_LOW;
+
+ return 0;
+}
+
+static struct irq_host_ops xics_host_direct_ops = {
+ .match = xics_host_match,
+ .map = xics_host_map_direct,
+ .xlate = xics_host_xlate,
+};
+
+static struct irq_host_ops xics_host_lpar_ops = {
+ .match = xics_host_match,
+ .map = xics_host_map_lpar,
+ .xlate = xics_host_xlate,
+};
+
+static void __init xics_init_host(void)
+{
+ struct irq_host_ops *ops;
+
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ ops = &xics_host_lpar_ops;
+ else
+ ops = &xics_host_direct_ops;
+ xics_host = irq_alloc_host(IRQ_HOST_MAP_TREE, 0, ops,
+ XICS_IRQ_SPURIOUS);
+ BUG_ON(xics_host == NULL);
+ irq_set_default_host(xics_host);
+}
+
+static void __init xics_map_one_cpu(int hw_id, unsigned long addr,
+ unsigned long size)
{
+#ifdef CONFIG_SMP
int i;
- unsigned long intr_size = 0;
- struct device_node *np;
- uint *ireg, ilen, indx = 0;
- unsigned long intr_base = 0;
- struct xics_interrupt_node {
- unsigned long addr;
- unsigned long size;
- } intnodes[NR_CPUS];
- ppc64_boot_msg(0x20, "XICS Init");
+ /* This may look gross but it's good enough for now, we don't quite
+ * have a hard -> linux processor id matching.
+ */
+ for_each_possible_cpu(i) {
+ if (!cpu_present(i))
+ continue;
+ if (hw_id == get_hard_smp_processor_id(i)) {
+ xics_per_cpu[i] = ioremap(addr, size);
+ return;
+ }
+ }
+#else
+ if (hw_id != 0)
+ return;
+ xics_per_cpu[0] = ioremap(addr, size);
+#endif /* CONFIG_SMP */
+}
- ibm_get_xive = rtas_token("ibm,get-xive");
- ibm_set_xive = rtas_token("ibm,set-xive");
- ibm_int_on = rtas_token("ibm,int-on");
- ibm_int_off = rtas_token("ibm,int-off");
+static void __init xics_init_one_node(struct device_node *np,
+ unsigned int *indx)
+{
+ unsigned int ilen;
+ u32 *ireg;
- np = of_find_node_by_type(NULL, "PowerPC-External-Interrupt-Presentation");
- if (!np)
- panic("xics_init_IRQ: can't find interrupt presentation");
+ /* This code does the theorically broken assumption that the interrupt
+ * server numbers are the same as the hard CPU numbers.
+ * This happens to be the case so far but we are playing with fire...
+ * should be fixed one of these days. -BenH.
+ */
+ ireg = (u32 *)get_property(np, "ibm,interrupt-server-ranges", NULL);
-nextnode:
- ireg = (uint *)get_property(np, "ibm,interrupt-server-ranges", NULL);
+ /* Do that ever happen ? we'll know soon enough... but even good'old
+ * f80 does have that property ..
+ */
+ WARN_ON(ireg == NULL);
if (ireg) {
/*
* set node starting index for this node
*/
- indx = *ireg;
+ *indx = *ireg;
}
-
- ireg = (uint *)get_property(np, "reg", &ilen);
+ ireg = (u32 *)get_property(np, "reg", &ilen);
if (!ireg)
panic("xics_init_IRQ: can't find interrupt reg property");
- while (ilen) {
- intnodes[indx].addr = (unsigned long)*ireg++ << 32;
- ilen -= sizeof(uint);
- intnodes[indx].addr |= *ireg++;
- ilen -= sizeof(uint);
- intnodes[indx].size = (unsigned long)*ireg++ << 32;
- ilen -= sizeof(uint);
- intnodes[indx].size |= *ireg++;
- ilen -= sizeof(uint);
- indx++;
- if (indx >= NR_CPUS) break;
+ while (ilen >= (4 * sizeof(u32))) {
+ unsigned long addr, size;
+
+ /* XXX Use proper OF parsing code here !!! */
+ addr = (unsigned long)*ireg++ << 32;
+ ilen -= sizeof(u32);
+ addr |= *ireg++;
+ ilen -= sizeof(u32);
+ size = (unsigned long)*ireg++ << 32;
+ ilen -= sizeof(u32);
+ size |= *ireg++;
+ ilen -= sizeof(u32);
+ xics_map_one_cpu(*indx, addr, size);
+ (*indx)++;
+ }
+}
+
+
+static void __init xics_setup_8259_cascade(void)
+{
+ struct device_node *np, *old, *found = NULL;
+ int cascade, naddr;
+ u32 *addrp;
+ unsigned long intack = 0;
+
+ for_each_node_by_type(np, "interrupt-controller")
+ if (device_is_compatible(np, "chrp,iic")) {
+ found = np;
+ break;
+ }
+ if (found == NULL) {
+ printk(KERN_DEBUG "xics: no ISA interrupt controller\n");
+ return;
+ }
+ cascade = irq_of_parse_and_map(found, 0);
+ if (cascade == NO_IRQ) {
+ printk(KERN_ERR "xics: failed to map cascade interrupt");
+ return;
+ }
+ pr_debug("xics: cascade mapped to irq %d\n", cascade);
+
+ for (old = of_node_get(found); old != NULL ; old = np) {
+ np = of_get_parent(old);
+ of_node_put(old);
+ if (np == NULL)
+ break;
+ if (strcmp(np->name, "pci") != 0)
+ continue;
+ addrp = (u32 *)get_property(np, "8259-interrupt-acknowledge", NULL);
+ if (addrp == NULL)
+ continue;
+ naddr = prom_n_addr_cells(np);
+ intack = addrp[naddr-1];
+ if (naddr > 1)
+ intack |= ((unsigned long)addrp[naddr-2]) << 32;
+ }
+ if (intack)
+ printk(KERN_DEBUG "xics: PCI 8259 intack at 0x%016lx\n", intack);
+ i8259_init(found, intack);
+ of_node_put(found);
+ set_irq_chained_handler(cascade, pseries_8259_cascade);
+}
+
+void __init xics_init_IRQ(void)
+{
+ int i;
+ struct device_node *np;
+ u32 *ireg, ilen, indx = 0;
+ int found = 0;
+
+ ppc64_boot_msg(0x20, "XICS Init");
+
+ ibm_get_xive = rtas_token("ibm,get-xive");
+ ibm_set_xive = rtas_token("ibm,set-xive");
+ ibm_int_on = rtas_token("ibm,int-on");
+ ibm_int_off = rtas_token("ibm,int-off");
+
+ for_each_node_by_type(np, "PowerPC-External-Interrupt-Presentation") {
+ found = 1;
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ break;
+ xics_init_one_node(np, &indx);
}
+ if (found == 0)
+ return;
- np = of_find_node_by_type(np, "PowerPC-External-Interrupt-Presentation");
- if ((indx < NR_CPUS) && np) goto nextnode;
+ xics_init_host();
/* Find the server numbers for the boot cpu. */
for (np = of_find_node_by_type(NULL, "cpu");
np;
np = of_find_node_by_type(np, "cpu")) {
- ireg = (uint *)get_property(np, "reg", &ilen);
+ ireg = (u32 *)get_property(np, "reg", &ilen);
if (ireg && ireg[0] == get_hard_smp_processor_id(boot_cpuid)) {
- ireg = (uint *)get_property(np, "ibm,ppc-interrupt-gserver#s",
- &ilen);
+ ireg = (u32 *)get_property(np,
+ "ibm,ppc-interrupt-gserver#s",
+ &ilen);
i = ilen / sizeof(int);
if (ireg && i > 0) {
default_server = ireg[0];
- default_distrib_server = ireg[i-1]; /* take last element */
+ /* take last element */
+ default_distrib_server = ireg[i-1];
}
- ireg = (uint *)get_property(np,
+ ireg = (u32 *)get_property(np,
"ibm,interrupt-server#-size", NULL);
if (ireg)
interrupt_server_size = *ireg;
@@ -516,135 +739,48 @@ nextnode:
}
of_node_put(np);
- intr_base = intnodes[0].addr;
- intr_size = intnodes[0].size;
-
- np = of_find_node_by_type(NULL, "interrupt-controller");
- if (!np) {
- printk(KERN_DEBUG "xics: no ISA interrupt controller\n");
- xics_irq_8259_cascade_real = -1;
- xics_irq_8259_cascade = -1;
- } else {
- ireg = (uint *) get_property(np, "interrupts", NULL);
- if (!ireg)
- panic("xics_init_IRQ: can't find ISA interrupts property");
-
- xics_irq_8259_cascade_real = *ireg;
- xics_irq_8259_cascade
- = virt_irq_create_mapping(xics_irq_8259_cascade_real);
- i8259_init(0, 0);
- of_node_put(np);
- }
-
if (firmware_has_feature(FW_FEATURE_LPAR))
- ops = &pSeriesLP_ops;
- else {
-#ifdef CONFIG_SMP
- for_each_possible_cpu(i) {
- int hard_id;
-
- /* FIXME: Do this dynamically! --RR */
- if (!cpu_present(i))
- continue;
-
- hard_id = get_hard_smp_processor_id(i);
- xics_per_cpu[i] = ioremap(intnodes[hard_id].addr,
- intnodes[hard_id].size);
- }
-#else
- xics_per_cpu[0] = ioremap(intr_base, intr_size);
-#endif /* CONFIG_SMP */
- }
-
- for (i = irq_offset_value(); i < NR_IRQS; ++i)
- get_irq_desc(i)->chip = &xics_pic;
+ ppc_md.get_irq = xics_get_irq_lpar;
+ else
+ ppc_md.get_irq = xics_get_irq_direct;
xics_setup_cpu();
+ xics_setup_8259_cascade();
+
ppc64_boot_msg(0x21, "XICS Done");
}
-/*
- * We cant do this in init_IRQ because we need the memory subsystem up for
- * request_irq()
- */
-static int __init xics_setup_i8259(void)
-{
- if (ppc64_interrupt_controller == IC_PPC_XIC &&
- xics_irq_8259_cascade != -1) {
- if (request_irq(irq_offset_up(xics_irq_8259_cascade),
- no_action, 0, "8259 cascade", NULL))
- printk(KERN_ERR "xics_setup_i8259: couldn't get 8259 "
- "cascade\n");
- }
- return 0;
-}
-arch_initcall(xics_setup_i8259);
#ifdef CONFIG_SMP
void xics_request_IPIs(void)
{
- virt_irq_to_real_map[XICS_IPI] = XICS_IPI;
+ unsigned int ipi;
+
+ ipi = irq_create_mapping(xics_host, XICS_IPI, 0);
+ BUG_ON(ipi == NO_IRQ);
/*
* IPIs are marked IRQF_DISABLED as they must run with irqs
* disabled
*/
- request_irq(irq_offset_up(XICS_IPI), xics_ipi_action,
- IRQF_DISABLED, "IPI", NULL);
- get_irq_desc(irq_offset_up(XICS_IPI))->status |= IRQ_PER_CPU;
-}
-#endif
-
-static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
-{
- unsigned int irq;
- int status;
- int xics_status[2];
- unsigned long newmask;
- cpumask_t tmp = CPU_MASK_NONE;
-
- irq = virt_irq_to_real(irq_offset_down(virq));
- if (irq == XICS_IPI || irq == NO_IRQ)
- return;
-
- status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
-
- if (status) {
- printk(KERN_ERR "xics_set_affinity: irq=%u ibm,get-xive "
- "returns %d\n", irq, status);
- return;
- }
-
- /* For the moment only implement delivery to all cpus or one cpu */
- if (cpus_equal(cpumask, CPU_MASK_ALL)) {
- newmask = default_distrib_server;
- } else {
- cpus_and(tmp, cpu_online_map, cpumask);
- if (cpus_empty(tmp))
- return;
- newmask = get_hard_smp_processor_id(first_cpu(tmp));
- }
-
- status = rtas_call(ibm_set_xive, 3, 1, NULL,
- irq, newmask, xics_status[1]);
-
- if (status) {
- printk(KERN_ERR "xics_set_affinity: irq=%u ibm,set-xive "
- "returns %d\n", irq, status);
- return;
- }
+ set_irq_handler(ipi, handle_percpu_irq);
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ request_irq(ipi, xics_ipi_action_lpar, IRQF_DISABLED,
+ "IPI", NULL);
+ else
+ request_irq(ipi, xics_ipi_action_direct, IRQF_DISABLED,
+ "IPI", NULL);
}
+#endif /* CONFIG_SMP */
void xics_teardown_cpu(int secondary)
{
int cpu = smp_processor_id();
+ unsigned int ipi;
+ struct irq_desc *desc;
- ops->cppr_info(cpu, 0x00);
- iosync();
-
- /* Clear IPI */
- ops->qirr_info(cpu, 0xff);
+ xics_set_cpu_priority(cpu, 0);
/*
* we need to EOI the IPI if we got here from kexec down IPI
@@ -653,7 +789,13 @@ void xics_teardown_cpu(int secondary)
* should we be flagging idle loop instead?
* or creating some task to be scheduled?
*/
- ops->xirr_info_set(cpu, XICS_IPI);
+
+ ipi = irq_find_mapping(xics_host, XICS_IPI);
+ if (ipi == XICS_IRQ_SPURIOUS)
+ return;
+ desc = get_irq_desc(ipi);
+ if (desc->chip && desc->chip->eoi)
+ desc->chip->eoi(XICS_IPI);
/*
* Some machines need to have at least one cpu in the GIQ,
@@ -661,8 +803,8 @@ void xics_teardown_cpu(int secondary)
*/
if (secondary)
rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
- (1UL << interrupt_server_size) - 1 -
- default_distrib_server, 0);
+ (1UL << interrupt_server_size) - 1 -
+ default_distrib_server, 0);
}
#ifdef CONFIG_HOTPLUG_CPU
@@ -674,8 +816,7 @@ void xics_migrate_irqs_away(void)
unsigned int irq, virq, cpu = smp_processor_id();
/* Reject any interrupt that was queued to us... */
- ops->cppr_info(cpu, 0);
- iosync();
+ xics_set_cpu_priority(cpu, 0);
/* remove ourselves from the global interrupt queue */
status = rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
@@ -683,24 +824,23 @@ void xics_migrate_irqs_away(void)
WARN_ON(status < 0);
/* Allow IPIs again... */
- ops->cppr_info(cpu, DEFAULT_PRIORITY);
- iosync();
+ xics_set_cpu_priority(cpu, DEFAULT_PRIORITY);
for_each_irq(virq) {
- irq_desc_t *desc;
+ struct irq_desc *desc;
int xics_status[2];
unsigned long flags;
/* We cant set affinity on ISA interrupts */
- if (virq < irq_offset_value())
+ if (virq < NUM_ISA_INTERRUPTS)
continue;
-
- desc = get_irq_desc(virq);
- irq = virt_irq_to_real(irq_offset_down(virq));
-
+ if (irq_map[virq].host != xics_host)
+ continue;
+ irq = (unsigned int)irq_map[virq].hwirq;
/* We need to get IPIs still. */
- if (irq == XICS_IPI || irq == NO_IRQ)
+ if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
continue;
+ desc = get_irq_desc(virq);
/* We only need to migrate enabled IRQS */
if (desc == NULL || desc->chip == NULL
diff --git a/arch/powerpc/platforms/pseries/xics.h b/arch/powerpc/platforms/pseries/xics.h
index e14c70868f1d..6ee1055b0ffb 100644
--- a/arch/powerpc/platforms/pseries/xics.h
+++ b/arch/powerpc/platforms/pseries/xics.h
@@ -14,13 +14,12 @@
#include <linux/cache.h>
-void xics_init_IRQ(void);
-int xics_get_irq(struct pt_regs *);
-void xics_setup_cpu(void);
-void xics_teardown_cpu(int secondary);
-void xics_cause_IPI(int cpu);
-void xics_request_IPIs(void);
-void xics_migrate_irqs_away(void);
+extern void xics_init_IRQ(void);
+extern void xics_setup_cpu(void);
+extern void xics_teardown_cpu(int secondary);
+extern void xics_cause_IPI(int cpu);
+extern void xics_request_IPIs(void);
+extern void xics_migrate_irqs_away(void);
/* first argument is ignored for now*/
void pSeriesLP_cppr_info(int n_cpu, u8 value);
@@ -31,4 +30,8 @@ struct xics_ipi_struct {
extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
+struct irq_desc;
+extern void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs);
+
#endif /* _POWERPC_KERNEL_XICS_H */
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 054bd8b41ef5..cebfae242602 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -4,7 +4,6 @@ endif
obj-$(CONFIG_MPIC) += mpic.o
obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
-obj-$(CONFIG_PPC_I8259) += i8259.o
obj-$(CONFIG_PPC_MPC106) += grackle.o
obj-$(CONFIG_BOOKE) += dcr.o
obj-$(CONFIG_40x) += dcr.o
@@ -14,3 +13,7 @@ obj-$(CONFIG_PPC_83xx) += ipic.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_PPC_TODC) += todc.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
+
+ifeq ($(CONFIG_PPC_MERGE),y)
+obj-$(CONFIG_PPC_I8259) += i8259.o
+ endif
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index 1a3ef1ab9d6e..72c73a6105cd 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -6,11 +6,16 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+#undef DEBUG
+
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
#include <asm/io.h>
#include <asm/i8259.h>
+#include <asm/prom.h>
static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */
@@ -20,7 +25,8 @@ static unsigned char cached_8259[2] = { 0xff, 0xff };
static DEFINE_SPINLOCK(i8259_lock);
-static int i8259_pic_irq_offset;
+static struct device_node *i8259_node;
+static struct irq_host *i8259_host;
/*
* Acknowledge the IRQ using either the PCI host bridge's interrupt
@@ -28,16 +34,18 @@ static int i8259_pic_irq_offset;
* which is called. It should be noted that polling is broken on some
* IBM and Motorola PReP boxes so we must use the int-ack feature on them.
*/
-int i8259_irq(struct pt_regs *regs)
+unsigned int i8259_irq(struct pt_regs *regs)
{
int irq;
-
- spin_lock(&i8259_lock);
+ int lock = 0;
/* Either int-ack or poll for the IRQ */
if (pci_intack)
irq = readb(pci_intack);
else {
+ spin_lock(&i8259_lock);
+ lock = 1;
+
/* Perform an interrupt acknowledge cycle on controller 1. */
outb(0x0C, 0x20); /* prepare for poll */
irq = inb(0x20) & 7;
@@ -62,16 +70,13 @@ int i8259_irq(struct pt_regs *regs)
if (!pci_intack)
outb(0x0B, 0x20); /* ISR register */
if(~inb(0x20) & 0x80)
- irq = -1;
- }
+ irq = NO_IRQ;
+ } else if (irq == 0xff)
+ irq = NO_IRQ;
- spin_unlock(&i8259_lock);
- return irq + i8259_pic_irq_offset;
-}
-
-int i8259_irq_cascade(struct pt_regs *regs, void *unused)
-{
- return i8259_irq(regs);
+ if (lock)
+ spin_unlock(&i8259_lock);
+ return irq;
}
static void i8259_mask_and_ack_irq(unsigned int irq_nr)
@@ -79,7 +84,6 @@ static void i8259_mask_and_ack_irq(unsigned int irq_nr)
unsigned long flags;
spin_lock_irqsave(&i8259_lock, flags);
- irq_nr -= i8259_pic_irq_offset;
if (irq_nr > 7) {
cached_A1 |= 1 << (irq_nr-8);
inb(0xA1); /* DUMMY */
@@ -105,8 +109,9 @@ static void i8259_mask_irq(unsigned int irq_nr)
{
unsigned long flags;
+ pr_debug("i8259_mask_irq(%d)\n", irq_nr);
+
spin_lock_irqsave(&i8259_lock, flags);
- irq_nr -= i8259_pic_irq_offset;
if (irq_nr < 8)
cached_21 |= 1 << irq_nr;
else
@@ -119,8 +124,9 @@ static void i8259_unmask_irq(unsigned int irq_nr)
{
unsigned long flags;
+ pr_debug("i8259_unmask_irq(%d)\n", irq_nr);
+
spin_lock_irqsave(&i8259_lock, flags);
- irq_nr -= i8259_pic_irq_offset;
if (irq_nr < 8)
cached_21 &= ~(1 << irq_nr);
else
@@ -129,19 +135,11 @@ static void i8259_unmask_irq(unsigned int irq_nr)
spin_unlock_irqrestore(&i8259_lock, flags);
}
-static void i8259_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))
- && irq_desc[irq].action)
- i8259_unmask_irq(irq);
-}
-
-struct hw_interrupt_type i8259_pic = {
- .typename = " i8259 ",
- .enable = i8259_unmask_irq,
- .disable = i8259_mask_irq,
- .ack = i8259_mask_and_ack_irq,
- .end = i8259_end_irq,
+static struct irq_chip i8259_pic = {
+ .typename = " i8259 ",
+ .mask = i8259_mask_irq,
+ .unmask = i8259_unmask_irq,
+ .mask_ack = i8259_mask_and_ack_irq,
};
static struct resource pic1_iores = {
@@ -165,25 +163,84 @@ static struct resource pic_edgectrl_iores = {
.flags = IORESOURCE_BUSY,
};
-static struct irqaction i8259_irqaction = {
- .handler = no_action,
- .flags = IRQF_DISABLED,
- .mask = CPU_MASK_NONE,
- .name = "82c59 secondary cascade",
+static int i8259_host_match(struct irq_host *h, struct device_node *node)
+{
+ return i8259_node == NULL || i8259_node == node;
+}
+
+static int i8259_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw, unsigned int flags)
+{
+ pr_debug("i8259_host_map(%d, 0x%lx)\n", virq, hw);
+
+ /* We block the internal cascade */
+ if (hw == 2)
+ get_irq_desc(virq)->status |= IRQ_NOREQUEST;
+
+ /* We use the level stuff only for now, we might want to
+ * be more cautious here but that works for now
+ */
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(virq, &i8259_pic, handle_level_irq);
+ return 0;
+}
+
+static void i8259_host_unmap(struct irq_host *h, unsigned int virq)
+{
+ /* Make sure irq is masked in hardware */
+ i8259_mask_irq(virq);
+
+ /* remove chip and handler */
+ set_irq_chip_and_handler(virq, NULL, NULL);
+
+ /* Make sure it's completed */
+ synchronize_irq(virq);
+}
+
+static int i8259_host_xlate(struct irq_host *h, struct device_node *ct,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+ static unsigned char map_isa_senses[4] = {
+ IRQ_TYPE_LEVEL_LOW,
+ IRQ_TYPE_LEVEL_HIGH,
+ IRQ_TYPE_EDGE_FALLING,
+ IRQ_TYPE_EDGE_RISING,
+ };
+
+ *out_hwirq = intspec[0];
+ if (intsize > 1 && intspec[1] < 4)
+ *out_flags = map_isa_senses[intspec[1]];
+ else
+ *out_flags = IRQ_TYPE_NONE;
+
+ return 0;
+}
+
+static struct irq_host_ops i8259_host_ops = {
+ .match = i8259_host_match,
+ .map = i8259_host_map,
+ .unmap = i8259_host_unmap,
+ .xlate = i8259_host_xlate,
};
-/*
- * i8259_init()
- * intack_addr - PCI interrupt acknowledge (real) address which will return
- * the active irq from the 8259
+/****
+ * i8259_init - Initialize the legacy controller
+ * @node: device node of the legacy PIC (can be NULL, but then, it will match
+ * all interrupts, so beware)
+ * @intack_addr: PCI interrupt acknowledge (real) address which will return
+ * the active irq from the 8259
*/
-void __init i8259_init(unsigned long intack_addr, int offset)
+void i8259_init(struct device_node *node, unsigned long intack_addr)
{
unsigned long flags;
- int i;
+ /* initialize the controller */
spin_lock_irqsave(&i8259_lock, flags);
- i8259_pic_irq_offset = offset;
+
+ /* Mask all first */
+ outb(0xff, 0xA1);
+ outb(0xff, 0x21);
/* init master interrupt controller */
outb(0x11, 0x20); /* Start init sequence */
@@ -197,21 +254,36 @@ void __init i8259_init(unsigned long intack_addr, int offset)
outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
outb(0x01, 0xA1); /* Select 8086 mode */
+ /* That thing is slow */
+ udelay(100);
+
/* always read ISR */
outb(0x0B, 0x20);
outb(0x0B, 0xA0);
- /* Mask all interrupts */
+ /* Unmask the internal cascade */
+ cached_21 &= ~(1 << 2);
+
+ /* Set interrupt masks */
outb(cached_A1, 0xA1);
outb(cached_21, 0x21);
spin_unlock_irqrestore(&i8259_lock, flags);
- for (i = 0; i < NUM_ISA_INTERRUPTS; ++i)
- irq_desc[offset + i].chip = &i8259_pic;
+ /* create a legacy host */
+ if (node)
+ i8259_node = of_node_get(node);
+ i8259_host = irq_alloc_host(IRQ_HOST_MAP_LEGACY, 0, &i8259_host_ops, 0);
+ if (i8259_host == NULL) {
+ printk(KERN_ERR "i8259: failed to allocate irq host !\n");
+ return;
+ }
/* reserve our resources */
- setup_irq(offset + 2, &i8259_irqaction);
+ /* XXX should we continue doing that ? it seems to cause problems
+ * with further requesting of PCI IO resources for that range...
+ * need to look into it.
+ */
request_resource(&ioport_resource, &pic1_iores);
request_resource(&ioport_resource, &pic2_iores);
request_resource(&ioport_resource, &pic_edgectrl_iores);
@@ -219,4 +291,5 @@ void __init i8259_init(unsigned long intack_addr, int offset)
if (intack_addr != 0)
pci_intack = ioremap(intack_addr, 1);
+ printk(KERN_INFO "i8259 legacy interrupt controller initialized\n");
}
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 7e469358895f..7d31d7cc392d 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -100,8 +100,8 @@ static inline u32 _mpic_cpu_read(struct mpic *mpic, unsigned int reg)
if (mpic->flags & MPIC_PRIMARY)
cpu = hard_smp_processor_id();
-
- return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN, mpic->cpuregs[cpu], reg);
+ return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN,
+ mpic->cpuregs[cpu], reg);
}
static inline void _mpic_cpu_write(struct mpic *mpic, unsigned int reg, u32 value)
@@ -340,27 +340,19 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic)
#endif /* CONFIG_MPIC_BROKEN_U3 */
+#define mpic_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
+
/* Find an mpic associated with a given linux interrupt */
static struct mpic *mpic_find(unsigned int irq, unsigned int *is_ipi)
{
- struct mpic *mpic = mpics;
-
- while(mpic) {
- /* search IPIs first since they may override the main interrupts */
- if (irq >= mpic->ipi_offset && irq < (mpic->ipi_offset + 4)) {
- if (is_ipi)
- *is_ipi = 1;
- return mpic;
- }
- if (irq >= mpic->irq_offset &&
- irq < (mpic->irq_offset + mpic->irq_count)) {
- if (is_ipi)
- *is_ipi = 0;
- return mpic;
- }
- mpic = mpic -> next;
- }
- return NULL;
+ unsigned int src = mpic_irq_to_hw(irq);
+
+ if (irq < NUM_ISA_INTERRUPTS)
+ return NULL;
+ if (is_ipi)
+ *is_ipi = (src >= MPIC_VEC_IPI_0 && src <= MPIC_VEC_IPI_3);
+
+ return irq_desc[irq].chip_data;
}
/* Convert a cpu mask from logical to physical cpu numbers. */
@@ -378,14 +370,14 @@ static inline u32 mpic_physmask(u32 cpumask)
/* Get the mpic structure from the IPI number */
static inline struct mpic * mpic_from_ipi(unsigned int ipi)
{
- return container_of(irq_desc[ipi].chip, struct mpic, hc_ipi);
+ return irq_desc[ipi].chip_data;
}
#endif
/* Get the mpic structure from the irq number */
static inline struct mpic * mpic_from_irq(unsigned int irq)
{
- return container_of(irq_desc[irq].chip, struct mpic, hc_irq);
+ return irq_desc[irq].chip_data;
}
/* Send an EOI */
@@ -398,9 +390,7 @@ static inline void mpic_eoi(struct mpic *mpic)
#ifdef CONFIG_SMP
static irqreturn_t mpic_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
{
- struct mpic *mpic = dev_id;
-
- smp_message_recv(irq - mpic->ipi_offset, regs);
+ smp_message_recv(mpic_irq_to_hw(irq) - MPIC_VEC_IPI_0, regs);
return IRQ_HANDLED;
}
#endif /* CONFIG_SMP */
@@ -410,11 +400,11 @@ static irqreturn_t mpic_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
*/
-static void mpic_enable_irq(unsigned int irq)
+static void mpic_unmask_irq(unsigned int irq)
{
unsigned int loops = 100000;
struct mpic *mpic = mpic_from_irq(irq);
- unsigned int src = irq - mpic->irq_offset;
+ unsigned int src = mpic_irq_to_hw(irq);
DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, irq, src);
@@ -429,39 +419,13 @@ static void mpic_enable_irq(unsigned int irq)
break;
}
} while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK);
-
-#ifdef CONFIG_MPIC_BROKEN_U3
- if (mpic->flags & MPIC_BROKEN_U3) {
- unsigned int src = irq - mpic->irq_offset;
- if (mpic_is_ht_interrupt(mpic, src) &&
- (irq_desc[irq].status & IRQ_LEVEL))
- mpic_ht_end_irq(mpic, src);
- }
-#endif /* CONFIG_MPIC_BROKEN_U3 */
-}
-
-static unsigned int mpic_startup_irq(unsigned int irq)
-{
-#ifdef CONFIG_MPIC_BROKEN_U3
- struct mpic *mpic = mpic_from_irq(irq);
- unsigned int src = irq - mpic->irq_offset;
-#endif /* CONFIG_MPIC_BROKEN_U3 */
-
- mpic_enable_irq(irq);
-
-#ifdef CONFIG_MPIC_BROKEN_U3
- if (mpic_is_ht_interrupt(mpic, src))
- mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status);
-#endif /* CONFIG_MPIC_BROKEN_U3 */
-
- return 0;
}
-static void mpic_disable_irq(unsigned int irq)
+static void mpic_mask_irq(unsigned int irq)
{
unsigned int loops = 100000;
struct mpic *mpic = mpic_from_irq(irq);
- unsigned int src = irq - mpic->irq_offset;
+ unsigned int src = mpic_irq_to_hw(irq);
DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src);
@@ -478,23 +442,58 @@ static void mpic_disable_irq(unsigned int irq)
} while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK));
}
-static void mpic_shutdown_irq(unsigned int irq)
+static void mpic_end_irq(unsigned int irq)
{
+ struct mpic *mpic = mpic_from_irq(irq);
+
+#ifdef DEBUG_IRQ
+ DBG("%s: end_irq: %d\n", mpic->name, irq);
+#endif
+ /* We always EOI on end_irq() even for edge interrupts since that
+ * should only lower the priority, the MPIC should have properly
+ * latched another edge interrupt coming in anyway
+ */
+
+ mpic_eoi(mpic);
+}
+
#ifdef CONFIG_MPIC_BROKEN_U3
+
+static void mpic_unmask_ht_irq(unsigned int irq)
+{
struct mpic *mpic = mpic_from_irq(irq);
- unsigned int src = irq - mpic->irq_offset;
+ unsigned int src = mpic_irq_to_hw(irq);
- if (mpic_is_ht_interrupt(mpic, src))
- mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status);
+ mpic_unmask_irq(irq);
-#endif /* CONFIG_MPIC_BROKEN_U3 */
+ if (irq_desc[irq].status & IRQ_LEVEL)
+ mpic_ht_end_irq(mpic, src);
+}
+
+static unsigned int mpic_startup_ht_irq(unsigned int irq)
+{
+ struct mpic *mpic = mpic_from_irq(irq);
+ unsigned int src = mpic_irq_to_hw(irq);
+
+ mpic_unmask_irq(irq);
+ mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status);
- mpic_disable_irq(irq);
+ return 0;
}
-static void mpic_end_irq(unsigned int irq)
+static void mpic_shutdown_ht_irq(unsigned int irq)
{
struct mpic *mpic = mpic_from_irq(irq);
+ unsigned int src = mpic_irq_to_hw(irq);
+
+ mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status);
+ mpic_mask_irq(irq);
+}
+
+static void mpic_end_ht_irq(unsigned int irq)
+{
+ struct mpic *mpic = mpic_from_irq(irq);
+ unsigned int src = mpic_irq_to_hw(irq);
#ifdef DEBUG_IRQ
DBG("%s: end_irq: %d\n", mpic->name, irq);
@@ -504,30 +503,25 @@ static void mpic_end_irq(unsigned int irq)
* latched another edge interrupt coming in anyway
*/
-#ifdef CONFIG_MPIC_BROKEN_U3
- if (mpic->flags & MPIC_BROKEN_U3) {
- unsigned int src = irq - mpic->irq_offset;
- if (mpic_is_ht_interrupt(mpic, src) &&
- (irq_desc[irq].status & IRQ_LEVEL))
- mpic_ht_end_irq(mpic, src);
- }
-#endif /* CONFIG_MPIC_BROKEN_U3 */
-
+ if (irq_desc[irq].status & IRQ_LEVEL)
+ mpic_ht_end_irq(mpic, src);
mpic_eoi(mpic);
}
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
#ifdef CONFIG_SMP
-static void mpic_enable_ipi(unsigned int irq)
+static void mpic_unmask_ipi(unsigned int irq)
{
struct mpic *mpic = mpic_from_ipi(irq);
- unsigned int src = irq - mpic->ipi_offset;
+ unsigned int src = mpic_irq_to_hw(irq) - MPIC_VEC_IPI_0;
DBG("%s: enable_ipi: %d (ipi %d)\n", mpic->name, irq, src);
mpic_ipi_write(src, mpic_ipi_read(src) & ~MPIC_VECPRI_MASK);
}
-static void mpic_disable_ipi(unsigned int irq)
+static void mpic_mask_ipi(unsigned int irq)
{
/* NEVER disable an IPI... that's just plain wrong! */
}
@@ -551,29 +545,176 @@ static void mpic_end_ipi(unsigned int irq)
static void mpic_set_affinity(unsigned int irq, cpumask_t cpumask)
{
struct mpic *mpic = mpic_from_irq(irq);
+ unsigned int src = mpic_irq_to_hw(irq);
cpumask_t tmp;
cpus_and(tmp, cpumask, cpu_online_map);
- mpic_irq_write(irq - mpic->irq_offset, MPIC_IRQ_DESTINATION,
+ mpic_irq_write(src, MPIC_IRQ_DESTINATION,
mpic_physmask(cpus_addr(tmp)[0]));
}
+static unsigned int mpic_flags_to_vecpri(unsigned int flags, int *level)
+{
+ unsigned int vecpri;
+
+ /* Now convert sense value */
+ switch(flags & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_EDGE_RISING:
+ vecpri = MPIC_VECPRI_SENSE_EDGE |
+ MPIC_VECPRI_POLARITY_POSITIVE;
+ *level = 0;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ vecpri = MPIC_VECPRI_SENSE_EDGE |
+ MPIC_VECPRI_POLARITY_NEGATIVE;
+ *level = 0;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ vecpri = MPIC_VECPRI_SENSE_LEVEL |
+ MPIC_VECPRI_POLARITY_POSITIVE;
+ *level = 1;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ default:
+ vecpri = MPIC_VECPRI_SENSE_LEVEL |
+ MPIC_VECPRI_POLARITY_NEGATIVE;
+ *level = 1;
+ }
+ return vecpri;
+}
+
+static struct irq_chip mpic_irq_chip = {
+ .mask = mpic_mask_irq,
+ .unmask = mpic_unmask_irq,
+ .eoi = mpic_end_irq,
+};
+
+#ifdef CONFIG_SMP
+static struct irq_chip mpic_ipi_chip = {
+ .mask = mpic_mask_ipi,
+ .unmask = mpic_unmask_ipi,
+ .eoi = mpic_end_ipi,
+};
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_MPIC_BROKEN_U3
+static struct irq_chip mpic_irq_ht_chip = {
+ .startup = mpic_startup_ht_irq,
+ .shutdown = mpic_shutdown_ht_irq,
+ .mask = mpic_mask_irq,
+ .unmask = mpic_unmask_ht_irq,
+ .eoi = mpic_end_ht_irq,
+};
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
+
+static int mpic_host_match(struct irq_host *h, struct device_node *node)
+{
+ struct mpic *mpic = h->host_data;
+
+ /* Exact match, unless mpic node is NULL */
+ return mpic->of_node == NULL || mpic->of_node == node;
+}
+
+static int mpic_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw, unsigned int flags)
+{
+ struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_chip *chip;
+ struct mpic *mpic = h->host_data;
+ unsigned int vecpri = MPIC_VECPRI_SENSE_LEVEL |
+ MPIC_VECPRI_POLARITY_NEGATIVE;
+ int level;
+
+ pr_debug("mpic: map virq %d, hwirq 0x%lx, flags: 0x%x\n",
+ virq, hw, flags);
+
+ if (hw == MPIC_VEC_SPURRIOUS)
+ return -EINVAL;
+#ifdef CONFIG_SMP
+ else if (hw >= MPIC_VEC_IPI_0) {
+ WARN_ON(!(mpic->flags & MPIC_PRIMARY));
+
+ pr_debug("mpic: mapping as IPI\n");
+ set_irq_chip_data(virq, mpic);
+ set_irq_chip_and_handler(virq, &mpic->hc_ipi,
+ handle_percpu_irq);
+ return 0;
+ }
+#endif /* CONFIG_SMP */
+
+ if (hw >= mpic->irq_count)
+ return -EINVAL;
+
+ /* If no sense provided, check default sense array */
+ if (((flags & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_NONE) &&
+ mpic->senses && hw < mpic->senses_count)
+ flags |= mpic->senses[hw];
+
+ vecpri = mpic_flags_to_vecpri(flags, &level);
+ if (level)
+ desc->status |= IRQ_LEVEL;
+ chip = &mpic->hc_irq;
+
+#ifdef CONFIG_MPIC_BROKEN_U3
+ /* Check for HT interrupts, override vecpri */
+ if (mpic_is_ht_interrupt(mpic, hw)) {
+ vecpri &= ~(MPIC_VECPRI_SENSE_MASK |
+ MPIC_VECPRI_POLARITY_MASK);
+ vecpri |= MPIC_VECPRI_POLARITY_POSITIVE;
+ chip = &mpic->hc_ht_irq;
+ }
+#endif
+
+ /* Reconfigure irq */
+ vecpri |= MPIC_VECPRI_MASK | hw | (8 << MPIC_VECPRI_PRIORITY_SHIFT);
+ mpic_irq_write(hw, MPIC_IRQ_VECTOR_PRI, vecpri);
+
+ pr_debug("mpic: mapping as IRQ\n");
+
+ set_irq_chip_data(virq, mpic);
+ set_irq_chip_and_handler(virq, chip, handle_fasteoi_irq);
+ return 0;
+}
+
+static int mpic_host_xlate(struct irq_host *h, struct device_node *ct,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+
+{
+ static unsigned char map_mpic_senses[4] = {
+ IRQ_TYPE_EDGE_RISING,
+ IRQ_TYPE_LEVEL_LOW,
+ IRQ_TYPE_LEVEL_HIGH,
+ IRQ_TYPE_EDGE_FALLING,
+ };
+
+ *out_hwirq = intspec[0];
+ if (intsize > 1 && intspec[1] < 4)
+ *out_flags = map_mpic_senses[intspec[1]];
+ else
+ *out_flags = IRQ_TYPE_NONE;
+
+ return 0;
+}
+
+static struct irq_host_ops mpic_host_ops = {
+ .match = mpic_host_match,
+ .map = mpic_host_map,
+ .xlate = mpic_host_xlate,
+};
/*
* Exported functions
*/
-
-struct mpic * __init mpic_alloc(unsigned long phys_addr,
+struct mpic * __init mpic_alloc(struct device_node *node,
+ unsigned long phys_addr,
unsigned int flags,
unsigned int isu_size,
- unsigned int irq_offset,
unsigned int irq_count,
- unsigned int ipi_offset,
- unsigned char *senses,
- unsigned int senses_count,
const char *name)
{
struct mpic *mpic;
@@ -585,33 +726,38 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr,
if (mpic == NULL)
return NULL;
-
memset(mpic, 0, sizeof(struct mpic));
mpic->name = name;
+ mpic->of_node = node ? of_node_get(node) : NULL;
+ mpic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 256,
+ &mpic_host_ops,
+ MPIC_VEC_SPURRIOUS);
+ if (mpic->irqhost == NULL) {
+ of_node_put(node);
+ return NULL;
+ }
+
+ mpic->irqhost->host_data = mpic;
+ mpic->hc_irq = mpic_irq_chip;
mpic->hc_irq.typename = name;
- mpic->hc_irq.startup = mpic_startup_irq;
- mpic->hc_irq.shutdown = mpic_shutdown_irq;
- mpic->hc_irq.enable = mpic_enable_irq;
- mpic->hc_irq.disable = mpic_disable_irq;
- mpic->hc_irq.end = mpic_end_irq;
if (flags & MPIC_PRIMARY)
mpic->hc_irq.set_affinity = mpic_set_affinity;
+#ifdef CONFIG_MPIC_BROKEN_U3
+ mpic->hc_ht_irq = mpic_irq_ht_chip;
+ mpic->hc_ht_irq.typename = name;
+ if (flags & MPIC_PRIMARY)
+ mpic->hc_ht_irq.set_affinity = mpic_set_affinity;
+#endif /* CONFIG_MPIC_BROKEN_U3 */
#ifdef CONFIG_SMP
+ mpic->hc_ipi = mpic_ipi_chip;
mpic->hc_ipi.typename = name;
- mpic->hc_ipi.enable = mpic_enable_ipi;
- mpic->hc_ipi.disable = mpic_disable_ipi;
- mpic->hc_ipi.end = mpic_end_ipi;
#endif /* CONFIG_SMP */
mpic->flags = flags;
mpic->isu_size = isu_size;
- mpic->irq_offset = irq_offset;
mpic->irq_count = irq_count;
- mpic->ipi_offset = ipi_offset;
mpic->num_sources = 0; /* so far */
- mpic->senses = senses;
- mpic->senses_count = senses_count;
/* Map the global registers */
mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x1000);
@@ -679,8 +825,10 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr,
mpic->next = mpics;
mpics = mpic;
- if (flags & MPIC_PRIMARY)
+ if (flags & MPIC_PRIMARY) {
mpic_primary = mpic;
+ irq_set_default_host(mpic->irqhost);
+ }
return mpic;
}
@@ -697,26 +845,10 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
mpic->num_sources = isu_first + mpic->isu_size;
}
-void __init mpic_setup_cascade(unsigned int irq, mpic_cascade_t handler,
- void *data)
+void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count)
{
- struct mpic *mpic = mpic_find(irq, NULL);
- unsigned long flags;
-
- /* Synchronization here is a bit dodgy, so don't try to replace cascade
- * interrupts on the fly too often ... but normally it's set up at boot.
- */
- spin_lock_irqsave(&mpic_lock, flags);
- if (mpic->cascade)
- mpic_disable_irq(mpic->cascade_vec + mpic->irq_offset);
- mpic->cascade = NULL;
- wmb();
- mpic->cascade_vec = irq - mpic->irq_offset;
- mpic->cascade_data = data;
- wmb();
- mpic->cascade = handler;
- mpic_enable_irq(irq);
- spin_unlock_irqrestore(&mpic_lock, flags);
+ mpic->senses = senses;
+ mpic->senses_count = count;
}
void __init mpic_init(struct mpic *mpic)
@@ -724,6 +856,11 @@ void __init mpic_init(struct mpic *mpic)
int i;
BUG_ON(mpic->num_sources == 0);
+ WARN_ON(mpic->num_sources > MPIC_VEC_IPI_0);
+
+ /* Sanitize source count */
+ if (mpic->num_sources > MPIC_VEC_IPI_0)
+ mpic->num_sources = MPIC_VEC_IPI_0;
printk(KERN_INFO "mpic: Initializing for %d sources\n", mpic->num_sources);
@@ -747,12 +884,6 @@ void __init mpic_init(struct mpic *mpic)
MPIC_VECPRI_MASK |
(10 << MPIC_VECPRI_PRIORITY_SHIFT) |
(MPIC_VEC_IPI_0 + i));
-#ifdef CONFIG_SMP
- if (!(mpic->flags & MPIC_PRIMARY))
- continue;
- irq_desc[mpic->ipi_offset+i].status |= IRQ_PER_CPU;
- irq_desc[mpic->ipi_offset+i].chip = &mpic->hc_ipi;
-#endif /* CONFIG_SMP */
}
/* Initialize interrupt sources */
@@ -763,31 +894,21 @@ void __init mpic_init(struct mpic *mpic)
/* Do the HT PIC fixups on U3 broken mpic */
DBG("MPIC flags: %x\n", mpic->flags);
if ((mpic->flags & MPIC_BROKEN_U3) && (mpic->flags & MPIC_PRIMARY))
- mpic_scan_ht_pics(mpic);
+ mpic_scan_ht_pics(mpic);
#endif /* CONFIG_MPIC_BROKEN_U3 */
for (i = 0; i < mpic->num_sources; i++) {
/* start with vector = source number, and masked */
u32 vecpri = MPIC_VECPRI_MASK | i | (8 << MPIC_VECPRI_PRIORITY_SHIFT);
- int level = 0;
+ int level = 1;
- /* if it's an IPI, we skip it */
- if ((mpic->irq_offset + i) >= (mpic->ipi_offset + i) &&
- (mpic->irq_offset + i) < (mpic->ipi_offset + i + 4))
- continue;
-
/* do senses munging */
- if (mpic->senses && i < mpic->senses_count) {
- if (mpic->senses[i] & IRQ_SENSE_LEVEL)
- vecpri |= MPIC_VECPRI_SENSE_LEVEL;
- if (mpic->senses[i] & IRQ_POLARITY_POSITIVE)
- vecpri |= MPIC_VECPRI_POLARITY_POSITIVE;
- } else
+ if (mpic->senses && i < mpic->senses_count)
+ vecpri = mpic_flags_to_vecpri(mpic->senses[i],
+ &level);
+ else
vecpri |= MPIC_VECPRI_SENSE_LEVEL;
- /* remember if it was a level interrupts */
- level = (vecpri & MPIC_VECPRI_SENSE_LEVEL);
-
/* deal with broken U3 */
if (mpic->flags & MPIC_BROKEN_U3) {
#ifdef CONFIG_MPIC_BROKEN_U3
@@ -808,12 +929,6 @@ void __init mpic_init(struct mpic *mpic)
mpic_irq_write(i, MPIC_IRQ_VECTOR_PRI, vecpri);
mpic_irq_write(i, MPIC_IRQ_DESTINATION,
1 << hard_smp_processor_id());
-
- /* init linux descriptors */
- if (i < mpic->irq_count) {
- irq_desc[mpic->irq_offset+i].status = level ? IRQ_LEVEL : 0;
- irq_desc[mpic->irq_offset+i].chip = &mpic->hc_irq;
- }
}
/* Init spurrious vector */
@@ -854,19 +969,20 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
{
int is_ipi;
struct mpic *mpic = mpic_find(irq, &is_ipi);
+ unsigned int src = mpic_irq_to_hw(irq);
unsigned long flags;
u32 reg;
spin_lock_irqsave(&mpic_lock, flags);
if (is_ipi) {
- reg = mpic_ipi_read(irq - mpic->ipi_offset) &
+ reg = mpic_ipi_read(src - MPIC_VEC_IPI_0) &
~MPIC_VECPRI_PRIORITY_MASK;
- mpic_ipi_write(irq - mpic->ipi_offset,
+ mpic_ipi_write(src - MPIC_VEC_IPI_0,
reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
} else {
- reg = mpic_irq_read(irq - mpic->irq_offset,MPIC_IRQ_VECTOR_PRI)
+ reg = mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI)
& ~MPIC_VECPRI_PRIORITY_MASK;
- mpic_irq_write(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI,
+ mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI,
reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
}
spin_unlock_irqrestore(&mpic_lock, flags);
@@ -876,14 +992,15 @@ unsigned int mpic_irq_get_priority(unsigned int irq)
{
int is_ipi;
struct mpic *mpic = mpic_find(irq, &is_ipi);
+ unsigned int src = mpic_irq_to_hw(irq);
unsigned long flags;
u32 reg;
spin_lock_irqsave(&mpic_lock, flags);
if (is_ipi)
- reg = mpic_ipi_read(irq - mpic->ipi_offset);
+ reg = mpic_ipi_read(src = MPIC_VEC_IPI_0);
else
- reg = mpic_irq_read(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI);
+ reg = mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI);
spin_unlock_irqrestore(&mpic_lock, flags);
return (reg & MPIC_VECPRI_PRIORITY_MASK) >> MPIC_VECPRI_PRIORITY_SHIFT;
}
@@ -978,37 +1095,20 @@ void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask)
mpic_physmask(cpu_mask & cpus_addr(cpu_online_map)[0]));
}
-int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs)
+unsigned int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs)
{
- u32 irq;
+ u32 src;
- irq = mpic_cpu_read(MPIC_CPU_INTACK) & MPIC_VECPRI_VECTOR_MASK;
+ src = mpic_cpu_read(MPIC_CPU_INTACK) & MPIC_VECPRI_VECTOR_MASK;
#ifdef DEBUG_LOW
- DBG("%s: get_one_irq(): %d\n", mpic->name, irq);
+ DBG("%s: get_one_irq(): %d\n", mpic->name, src);
#endif
- if (mpic->cascade && irq == mpic->cascade_vec) {
-#ifdef DEBUG_LOW
- DBG("%s: cascading ...\n", mpic->name);
-#endif
- irq = mpic->cascade(regs, mpic->cascade_data);
- mpic_eoi(mpic);
- return irq;
- }
- if (unlikely(irq == MPIC_VEC_SPURRIOUS))
- return -1;
- if (irq < MPIC_VEC_IPI_0) {
-#ifdef DEBUG_IRQ
- DBG("%s: irq %d\n", mpic->name, irq + mpic->irq_offset);
-#endif
- return irq + mpic->irq_offset;
- }
-#ifdef DEBUG_IPI
- DBG("%s: ipi %d !\n", mpic->name, irq - MPIC_VEC_IPI_0);
-#endif
- return irq - MPIC_VEC_IPI_0 + mpic->ipi_offset;
+ if (unlikely(src == MPIC_VEC_SPURRIOUS))
+ return NO_IRQ;
+ return irq_linear_revmap(mpic->irqhost, src);
}
-int mpic_get_irq(struct pt_regs *regs)
+unsigned int mpic_get_irq(struct pt_regs *regs)
{
struct mpic *mpic = mpic_primary;
@@ -1022,25 +1122,27 @@ int mpic_get_irq(struct pt_regs *regs)
void mpic_request_ipis(void)
{
struct mpic *mpic = mpic_primary;
-
+ int i;
+ static char *ipi_names[] = {
+ "IPI0 (call function)",
+ "IPI1 (reschedule)",
+ "IPI2 (unused)",
+ "IPI3 (debugger break)",
+ };
BUG_ON(mpic == NULL);
-
- printk("requesting IPIs ... \n");
- /*
- * IPIs are marked IRQF_DISABLED as they must run with irqs
- * disabled
- */
- request_irq(mpic->ipi_offset+0, mpic_ipi_action, IRQF_DISABLED,
- "IPI0 (call function)", mpic);
- request_irq(mpic->ipi_offset+1, mpic_ipi_action, IRQF_DISABLED,
- "IPI1 (reschedule)", mpic);
- request_irq(mpic->ipi_offset+2, mpic_ipi_action, IRQF_DISABLED,
- "IPI2 (unused)", mpic);
- request_irq(mpic->ipi_offset+3, mpic_ipi_action, IRQF_DISABLED,
- "IPI3 (debugger break)", mpic);
-
- printk("IPIs requested... \n");
+ printk(KERN_INFO "mpic: requesting IPIs ... \n");
+
+ for (i = 0; i < 4; i++) {
+ unsigned int vipi = irq_create_mapping(mpic->irqhost,
+ MPIC_VEC_IPI_0 + i, 0);
+ if (vipi == NO_IRQ) {
+ printk(KERN_ERR "Failed to map IPI %d\n", i);
+ break;
+ }
+ request_irq(vipi, mpic_ipi_action, IRQF_DISABLED,
+ ipi_names[i], mpic);
+ }
}
void smp_mpic_message_pass(int target, int msg)
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 490749ca88f9..2497bbc07e76 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -104,3 +104,5 @@ obj-$(CONFIG_PPC_MPC52xx) += mpc52xx_setup.o mpc52xx_pic.o \
ifeq ($(CONFIG_PPC_MPC52xx),y)
obj-$(CONFIG_PCI) += mpc52xx_pci.o
endif
+
+obj-$(CONFIG_PPC_I8259) += i8259.o
diff --git a/arch/ppc/syslib/i8259.c b/arch/ppc/syslib/i8259.c
new file mode 100644
index 000000000000..eb35353af837
--- /dev/null
+++ b/arch/ppc/syslib/i8259.c
@@ -0,0 +1,212 @@
+/*
+ * i8259 interrupt controller driver.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/i8259.h>
+
+static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */
+
+static unsigned char cached_8259[2] = { 0xff, 0xff };
+#define cached_A1 (cached_8259[0])
+#define cached_21 (cached_8259[1])
+
+static DEFINE_SPINLOCK(i8259_lock);
+
+static int i8259_pic_irq_offset;
+
+/*
+ * Acknowledge the IRQ using either the PCI host bridge's interrupt
+ * acknowledge feature or poll. How i8259_init() is called determines
+ * which is called. It should be noted that polling is broken on some
+ * IBM and Motorola PReP boxes so we must use the int-ack feature on them.
+ */
+int i8259_irq(struct pt_regs *regs)
+{
+ int irq;
+
+ spin_lock(&i8259_lock);
+
+ /* Either int-ack or poll for the IRQ */
+ if (pci_intack)
+ irq = readb(pci_intack);
+ else {
+ /* Perform an interrupt acknowledge cycle on controller 1. */
+ outb(0x0C, 0x20); /* prepare for poll */
+ irq = inb(0x20) & 7;
+ if (irq == 2 ) {
+ /*
+ * Interrupt is cascaded so perform interrupt
+ * acknowledge on controller 2.
+ */
+ outb(0x0C, 0xA0); /* prepare for poll */
+ irq = (inb(0xA0) & 7) + 8;
+ }
+ }
+
+ if (irq == 7) {
+ /*
+ * This may be a spurious interrupt.
+ *
+ * Read the interrupt status register (ISR). If the most
+ * significant bit is not set then there is no valid
+ * interrupt.
+ */
+ if (!pci_intack)
+ outb(0x0B, 0x20); /* ISR register */
+ if(~inb(0x20) & 0x80)
+ irq = -1;
+ }
+
+ spin_unlock(&i8259_lock);
+ return irq + i8259_pic_irq_offset;
+}
+
+static void i8259_mask_and_ack_irq(unsigned int irq_nr)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259_lock, flags);
+ irq_nr -= i8259_pic_irq_offset;
+ if (irq_nr > 7) {
+ cached_A1 |= 1 << (irq_nr-8);
+ inb(0xA1); /* DUMMY */
+ outb(cached_A1, 0xA1);
+ outb(0x20, 0xA0); /* Non-specific EOI */
+ outb(0x20, 0x20); /* Non-specific EOI to cascade */
+ } else {
+ cached_21 |= 1 << irq_nr;
+ inb(0x21); /* DUMMY */
+ outb(cached_21, 0x21);
+ outb(0x20, 0x20); /* Non-specific EOI */
+ }
+ spin_unlock_irqrestore(&i8259_lock, flags);
+}
+
+static void i8259_set_irq_mask(int irq_nr)
+{
+ outb(cached_A1,0xA1);
+ outb(cached_21,0x21);
+}
+
+static void i8259_mask_irq(unsigned int irq_nr)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259_lock, flags);
+ irq_nr -= i8259_pic_irq_offset;
+ if (irq_nr < 8)
+ cached_21 |= 1 << irq_nr;
+ else
+ cached_A1 |= 1 << (irq_nr-8);
+ i8259_set_irq_mask(irq_nr);
+ spin_unlock_irqrestore(&i8259_lock, flags);
+}
+
+static void i8259_unmask_irq(unsigned int irq_nr)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259_lock, flags);
+ irq_nr -= i8259_pic_irq_offset;
+ if (irq_nr < 8)
+ cached_21 &= ~(1 << irq_nr);
+ else
+ cached_A1 &= ~(1 << (irq_nr-8));
+ i8259_set_irq_mask(irq_nr);
+ spin_unlock_irqrestore(&i8259_lock, flags);
+}
+
+static struct irq_chip i8259_pic = {
+ .typename = " i8259 ",
+ .mask = i8259_mask_irq,
+ .unmask = i8259_unmask_irq,
+ .mask_ack = i8259_mask_and_ack_irq,
+};
+
+static struct resource pic1_iores = {
+ .name = "8259 (master)",
+ .start = 0x20,
+ .end = 0x21,
+ .flags = IORESOURCE_BUSY,
+};
+
+static struct resource pic2_iores = {
+ .name = "8259 (slave)",
+ .start = 0xa0,
+ .end = 0xa1,
+ .flags = IORESOURCE_BUSY,
+};
+
+static struct resource pic_edgectrl_iores = {
+ .name = "8259 edge control",
+ .start = 0x4d0,
+ .end = 0x4d1,
+ .flags = IORESOURCE_BUSY,
+};
+
+static struct irqaction i8259_irqaction = {
+ .handler = no_action,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "82c59 secondary cascade",
+};
+
+/*
+ * i8259_init()
+ * intack_addr - PCI interrupt acknowledge (real) address which will return
+ * the active irq from the 8259
+ */
+void __init i8259_init(unsigned long intack_addr, int offset)
+{
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&i8259_lock, flags);
+ i8259_pic_irq_offset = offset;
+
+ /* init master interrupt controller */
+ outb(0x11, 0x20); /* Start init sequence */
+ outb(0x00, 0x21); /* Vector base */
+ outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */
+ outb(0x01, 0x21); /* Select 8086 mode */
+
+ /* init slave interrupt controller */
+ outb(0x11, 0xA0); /* Start init sequence */
+ outb(0x08, 0xA1); /* Vector base */
+ outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
+ outb(0x01, 0xA1); /* Select 8086 mode */
+
+ /* always read ISR */
+ outb(0x0B, 0x20);
+ outb(0x0B, 0xA0);
+
+ /* Mask all interrupts */
+ outb(cached_A1, 0xA1);
+ outb(cached_21, 0x21);
+
+ spin_unlock_irqrestore(&i8259_lock, flags);
+
+ for (i = 0; i < NUM_ISA_INTERRUPTS; ++i) {
+ set_irq_chip_and_handler(offset + i, &i8259_pic,
+ handle_level_irq);
+ irq_desc[offset + i].status |= IRQ_LEVEL;
+ }
+
+ /* reserve our resources */
+ setup_irq(offset + 2, &i8259_irqaction);
+ request_resource(&ioport_resource, &pic1_iores);
+ request_resource(&ioport_resource, &pic2_iores);
+ request_resource(&ioport_resource, &pic_edgectrl_iores);
+
+ if (intack_addr != 0)
+ pci_intack = ioremap(intack_addr, 1);
+
+}
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index 3721e12135d9..cc42e762396f 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -250,8 +250,6 @@ static int floppy_open(struct inode *inode, struct file *filp);
static int floppy_release(struct inode *inode, struct file *filp);
static int floppy_check_change(struct gendisk *disk);
static int floppy_revalidate(struct gendisk *disk);
-static int swim3_add_device(struct device_node *swims);
-int swim3_init(void);
#ifndef CONFIG_PMAC_MEDIABAY
#define check_media_bay(which, what) 1
@@ -1011,114 +1009,63 @@ static struct block_device_operations floppy_fops = {
.revalidate_disk= floppy_revalidate,
};
-int swim3_init(void)
-{
- struct device_node *swim;
- int err = -ENOMEM;
- int i;
-
- swim = find_devices("floppy");
- while (swim && (floppy_count < MAX_FLOPPIES))
- {
- swim3_add_device(swim);
- swim = swim->next;
- }
-
- swim = find_devices("swim3");
- while (swim && (floppy_count < MAX_FLOPPIES))
- {
- swim3_add_device(swim);
- swim = swim->next;
- }
-
- if (!floppy_count)
- return -ENODEV;
-
- for (i = 0; i < floppy_count; i++) {
- disks[i] = alloc_disk(1);
- if (!disks[i])
- goto out;
- }
-
- if (register_blkdev(FLOPPY_MAJOR, "fd")) {
- err = -EBUSY;
- goto out;
- }
-
- swim3_queue = blk_init_queue(do_fd_request, &swim3_lock);
- if (!swim3_queue) {
- err = -ENOMEM;
- goto out_queue;
- }
-
- for (i = 0; i < floppy_count; i++) {
- struct gendisk *disk = disks[i];
- disk->major = FLOPPY_MAJOR;
- disk->first_minor = i;
- disk->fops = &floppy_fops;
- disk->private_data = &floppy_states[i];
- disk->queue = swim3_queue;
- disk->flags |= GENHD_FL_REMOVABLE;
- sprintf(disk->disk_name, "fd%d", i);
- set_capacity(disk, 2880);
- add_disk(disk);
- }
- return 0;
-
-out_queue:
- unregister_blkdev(FLOPPY_MAJOR, "fd");
-out:
- while (i--)
- put_disk(disks[i]);
- /* shouldn't we do something with results of swim_add_device()? */
- return err;
-}
-
-static int swim3_add_device(struct device_node *swim)
+static int swim3_add_device(struct macio_dev *mdev, int index)
{
+ struct device_node *swim = mdev->ofdev.node;
struct device_node *mediabay;
- struct floppy_state *fs = &floppy_states[floppy_count];
- struct resource res_reg, res_dma;
+ struct floppy_state *fs = &floppy_states[index];
+ int rc = -EBUSY;
- if (of_address_to_resource(swim, 0, &res_reg) ||
- of_address_to_resource(swim, 1, &res_dma)) {
- printk(KERN_ERR "swim3: Can't get addresses\n");
- return -EINVAL;
+ /* Check & Request resources */
+ if (macio_resource_count(mdev) < 2) {
+ printk(KERN_WARNING "ifd%d: no address for %s\n",
+ index, swim->full_name);
+ return -ENXIO;
}
- if (request_mem_region(res_reg.start, res_reg.end - res_reg.start + 1,
- " (reg)") == NULL) {
- printk(KERN_ERR "swim3: Can't request register space\n");
- return -EINVAL;
+ if (macio_irq_count(mdev) < 2) {
+ printk(KERN_WARNING "fd%d: no intrs for device %s\n",
+ index, swim->full_name);
}
- if (request_mem_region(res_dma.start, res_dma.end - res_dma.start + 1,
- " (dma)") == NULL) {
- release_mem_region(res_reg.start,
- res_reg.end - res_reg.start + 1);
- printk(KERN_ERR "swim3: Can't request DMA space\n");
- return -EINVAL;
+ if (macio_request_resource(mdev, 0, "swim3 (mmio)")) {
+ printk(KERN_ERR "fd%d: can't request mmio resource for %s\n",
+ index, swim->full_name);
+ return -EBUSY;
}
-
- if (swim->n_intrs < 2) {
- printk(KERN_INFO "swim3: expecting 2 intrs (n_intrs:%d)\n",
- swim->n_intrs);
- release_mem_region(res_reg.start,
- res_reg.end - res_reg.start + 1);
- release_mem_region(res_dma.start,
- res_dma.end - res_dma.start + 1);
- return -EINVAL;
+ if (macio_request_resource(mdev, 1, "swim3 (dma)")) {
+ printk(KERN_ERR "fd%d: can't request dma resource for %s\n",
+ index, swim->full_name);
+ macio_release_resource(mdev, 0);
+ return -EBUSY;
}
+ dev_set_drvdata(&mdev->ofdev.dev, fs);
- mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ? swim->parent : NULL;
+ mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ?
+ swim->parent : NULL;
if (mediabay == NULL)
pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1);
memset(fs, 0, sizeof(*fs));
spin_lock_init(&fs->lock);
fs->state = idle;
- fs->swim3 = (struct swim3 __iomem *)ioremap(res_reg.start, 0x200);
- fs->dma = (struct dbdma_regs __iomem *)ioremap(res_dma.start, 0x200);
- fs->swim3_intr = swim->intrs[0].line;
- fs->dma_intr = swim->intrs[1].line;
+ fs->swim3 = (struct swim3 __iomem *)
+ ioremap(macio_resource_start(mdev, 0), 0x200);
+ if (fs->swim3 == NULL) {
+ printk("fd%d: couldn't map registers for %s\n",
+ index, swim->full_name);
+ rc = -ENOMEM;
+ goto out_release;
+ }
+ fs->dma = (struct dbdma_regs __iomem *)
+ ioremap(macio_resource_start(mdev, 1), 0x200);
+ if (fs->dma == NULL) {
+ printk("fd%d: couldn't map DMA for %s\n",
+ index, swim->full_name);
+ iounmap(fs->swim3);
+ rc = -ENOMEM;
+ goto out_release;
+ }
+ fs->swim3_intr = macio_irq(mdev, 0);
+ fs->dma_intr = macio_irq(mdev, 1);;
fs->cur_cyl = -1;
fs->cur_sector = -1;
fs->secpercyl = 36;
@@ -1132,15 +1079,16 @@ static int swim3_add_device(struct device_node *swim)
st_le16(&fs->dma_cmd[1].command, DBDMA_STOP);
if (request_irq(fs->swim3_intr, swim3_interrupt, 0, "SWIM3", fs)) {
- printk(KERN_ERR "Couldn't get irq %d for SWIM3\n", fs->swim3_intr);
+ printk(KERN_ERR "fd%d: couldn't request irq %d for %s\n",
+ index, fs->swim3_intr, swim->full_name);
pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 0);
+ goto out_unmap;
return -EBUSY;
}
/*
if (request_irq(fs->dma_intr, fd_dma_interrupt, 0, "SWIM3-dma", fs)) {
printk(KERN_ERR "Couldn't get irq %d for SWIM3 DMA",
fs->dma_intr);
- pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 0);
return -EBUSY;
}
*/
@@ -1150,8 +1098,90 @@ static int swim3_add_device(struct device_node *swim)
printk(KERN_INFO "fd%d: SWIM3 floppy controller %s\n", floppy_count,
mediabay ? "in media bay" : "");
- floppy_count++;
-
+ return 0;
+
+ out_unmap:
+ iounmap(fs->dma);
+ iounmap(fs->swim3);
+
+ out_release:
+ macio_release_resource(mdev, 0);
+ macio_release_resource(mdev, 1);
+
+ return rc;
+}
+
+static int __devinit swim3_attach(struct macio_dev *mdev, const struct of_device_id *match)
+{
+ int i, rc;
+ struct gendisk *disk;
+
+ /* Add the drive */
+ rc = swim3_add_device(mdev, floppy_count);
+ if (rc)
+ return rc;
+
+ /* Now create the queue if not there yet */
+ if (swim3_queue == NULL) {
+ /* If we failed, there isn't much we can do as the driver is still
+ * too dumb to remove the device, just bail out
+ */
+ if (register_blkdev(FLOPPY_MAJOR, "fd"))
+ return 0;
+ swim3_queue = blk_init_queue(do_fd_request, &swim3_lock);
+ if (swim3_queue == NULL) {
+ unregister_blkdev(FLOPPY_MAJOR, "fd");
+ return 0;
+ }
+ }
+
+ /* Now register that disk. Same comment about failure handling */
+ i = floppy_count++;
+ disk = disks[i] = alloc_disk(1);
+ if (disk == NULL)
+ return 0;
+
+ disk->major = FLOPPY_MAJOR;
+ disk->first_minor = i;
+ disk->fops = &floppy_fops;
+ disk->private_data = &floppy_states[i];
+ disk->queue = swim3_queue;
+ disk->flags |= GENHD_FL_REMOVABLE;
+ sprintf(disk->disk_name, "fd%d", i);
+ set_capacity(disk, 2880);
+ add_disk(disk);
+
+ return 0;
+}
+
+static struct of_device_id swim3_match[] =
+{
+ {
+ .name = "swim3",
+ },
+ {
+ .compatible = "ohare-swim3"
+ },
+ {
+ .compatible = "swim3"
+ },
+};
+
+static struct macio_driver swim3_driver =
+{
+ .name = "swim3",
+ .match_table = swim3_match,
+ .probe = swim3_attach,
+#if 0
+ .suspend = swim3_suspend,
+ .resume = swim3_resume,
+#endif
+};
+
+
+int swim3_init(void)
+{
+ macio_register_driver(&swim3_driver);
return 0;
}
diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c
index 8dc205b275e3..56612a2dca6b 100644
--- a/drivers/char/hvsi.c
+++ b/drivers/char/hvsi.c
@@ -1299,13 +1299,12 @@ static int __init hvsi_console_init(void)
hp->inbuf_end = hp->inbuf;
hp->state = HVSI_CLOSED;
hp->vtermno = *vtermno;
- hp->virq = virt_irq_create_mapping(irq[0]);
+ hp->virq = irq_create_mapping(NULL, irq[0], 0);
if (hp->virq == NO_IRQ) {
printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n",
- __FUNCTION__, hp->virq);
+ __FUNCTION__, irq[0]);
continue;
- } else
- hp->virq = irq_offset_up(hp->virq);
+ }
hvsi_count++;
}
diff --git a/drivers/macintosh/macio-adb.c b/drivers/macintosh/macio-adb.c
index 314fc0830d90..4b08852c35ee 100644
--- a/drivers/macintosh/macio-adb.c
+++ b/drivers/macintosh/macio-adb.c
@@ -90,22 +90,12 @@ int macio_init(void)
{
struct device_node *adbs;
struct resource r;
+ unsigned int irq;
adbs = find_compatible_devices("adb", "chrp,adb0");
if (adbs == 0)
return -ENXIO;
-#if 0
- { int i = 0;
-
- printk("macio_adb_init: node = %p, addrs =", adbs->node);
- while(!of_address_to_resource(adbs, i, &r))
- printk(" %x(%x)", r.start, r.end - r.start);
- printk(", intrs =");
- for (i = 0; i < adbs->n_intrs; ++i)
- printk(" %x", adbs->intrs[i].line);
- printk("\n"); }
-#endif
if (of_address_to_resource(adbs, 0, &r))
return -ENXIO;
adb = ioremap(r.start, sizeof(struct adb_regs));
@@ -117,10 +107,9 @@ int macio_init(void)
out_8(&adb->active_lo.r, 0xff);
out_8(&adb->autopoll.r, APE);
- if (request_irq(adbs->intrs[0].line, macio_adb_interrupt,
- 0, "ADB", (void *)0)) {
- printk(KERN_ERR "ADB: can't get irq %d\n",
- adbs->intrs[0].line);
+ irq = irq_of_parse_and_map(adbs, 0);
+ if (request_irq(irq, macio_adb_interrupt, 0, "ADB", (void *)0)) {
+ printk(KERN_ERR "ADB: can't get irq %d\n", irq);
return -EAGAIN;
}
out_8(&adb->intr_enb.r, DFB | TAG);
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 40ae7b6a939d..80c0c665b5f6 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -280,75 +280,128 @@ static void macio_release_dev(struct device *dev)
static int macio_resource_quirks(struct device_node *np, struct resource *res,
int index)
{
- if (res->flags & IORESOURCE_MEM) {
- /* Grand Central has too large resource 0 on some machines */
- if (index == 0 && !strcmp(np->name, "gc"))
- res->end = res->start + 0x1ffff;
+ /* Only quirks for memory resources for now */
+ if ((res->flags & IORESOURCE_MEM) == 0)
+ return 0;
+
+ /* Grand Central has too large resource 0 on some machines */
+ if (index == 0 && !strcmp(np->name, "gc"))
+ res->end = res->start + 0x1ffff;
- /* Airport has bogus resource 2 */
- if (index >= 2 && !strcmp(np->name, "radio"))
- return 1;
+ /* Airport has bogus resource 2 */
+ if (index >= 2 && !strcmp(np->name, "radio"))
+ return 1;
#ifndef CONFIG_PPC64
- /* DBDMAs may have bogus sizes */
- if ((res->start & 0x0001f000) == 0x00008000)
- res->end = res->start + 0xff;
+ /* DBDMAs may have bogus sizes */
+ if ((res->start & 0x0001f000) == 0x00008000)
+ res->end = res->start + 0xff;
#endif /* CONFIG_PPC64 */
- /* ESCC parent eats child resources. We could have added a
- * level of hierarchy, but I don't really feel the need
- * for it
- */
- if (!strcmp(np->name, "escc"))
- return 1;
-
- /* ESCC has bogus resources >= 3 */
- if (index >= 3 && !(strcmp(np->name, "ch-a") &&
- strcmp(np->name, "ch-b")))
- return 1;
-
- /* Media bay has too many resources, keep only first one */
- if (index > 0 && !strcmp(np->name, "media-bay"))
- return 1;
-
- /* Some older IDE resources have bogus sizes */
- if (!(strcmp(np->name, "IDE") && strcmp(np->name, "ATA") &&
- strcmp(np->type, "ide") && strcmp(np->type, "ata"))) {
- if (index == 0 && (res->end - res->start) > 0xfff)
- res->end = res->start + 0xfff;
- if (index == 1 && (res->end - res->start) > 0xff)
- res->end = res->start + 0xff;
- }
+ /* ESCC parent eats child resources. We could have added a
+ * level of hierarchy, but I don't really feel the need
+ * for it
+ */
+ if (!strcmp(np->name, "escc"))
+ return 1;
+
+ /* ESCC has bogus resources >= 3 */
+ if (index >= 3 && !(strcmp(np->name, "ch-a") &&
+ strcmp(np->name, "ch-b")))
+ return 1;
+
+ /* Media bay has too many resources, keep only first one */
+ if (index > 0 && !strcmp(np->name, "media-bay"))
+ return 1;
+
+ /* Some older IDE resources have bogus sizes */
+ if (!(strcmp(np->name, "IDE") && strcmp(np->name, "ATA") &&
+ strcmp(np->type, "ide") && strcmp(np->type, "ata"))) {
+ if (index == 0 && (res->end - res->start) > 0xfff)
+ res->end = res->start + 0xfff;
+ if (index == 1 && (res->end - res->start) > 0xff)
+ res->end = res->start + 0xff;
}
return 0;
}
+static void macio_create_fixup_irq(struct macio_dev *dev, int index,
+ unsigned int line)
+{
+ unsigned int irq;
-static void macio_setup_interrupts(struct macio_dev *dev)
+ irq = irq_create_mapping(NULL, line, 0);
+ if (irq != NO_IRQ) {
+ dev->interrupt[index].start = irq;
+ dev->interrupt[index].flags = IORESOURCE_IRQ;
+ dev->interrupt[index].name = dev->ofdev.dev.bus_id;
+ }
+ if (dev->n_interrupts <= index)
+ dev->n_interrupts = index + 1;
+}
+
+static void macio_add_missing_resources(struct macio_dev *dev)
{
struct device_node *np = dev->ofdev.node;
- int i,j;
+ unsigned int irq_base;
+
+ /* Gatwick has some missing interrupts on child nodes */
+ if (dev->bus->chip->type != macio_gatwick)
+ return;
- /* For now, we use pre-parsed entries in the device-tree for
- * interrupt routing and addresses, but we should change that
- * to dynamically parsed entries and so get rid of most of the
- * clutter in struct device_node
+ /* irq_base is always 64 on gatwick. I have no cleaner way to get
+ * that value from here at this point
*/
- for (i = j = 0; i < np->n_intrs; i++) {
+ irq_base = 64;
+
+ /* Fix SCC */
+ if (strcmp(np->name, "ch-a") == 0) {
+ macio_create_fixup_irq(dev, 0, 15 + irq_base);
+ macio_create_fixup_irq(dev, 1, 4 + irq_base);
+ macio_create_fixup_irq(dev, 2, 5 + irq_base);
+ printk(KERN_INFO "macio: fixed SCC irqs on gatwick\n");
+ }
+
+ /* Fix media-bay */
+ if (strcmp(np->name, "media-bay") == 0) {
+ macio_create_fixup_irq(dev, 0, 29 + irq_base);
+ printk(KERN_INFO "macio: fixed media-bay irq on gatwick\n");
+ }
+
+ /* Fix left media bay childs */
+ if (dev->media_bay != NULL && strcmp(np->name, "floppy") == 0) {
+ macio_create_fixup_irq(dev, 0, 19 + irq_base);
+ macio_create_fixup_irq(dev, 1, 1 + irq_base);
+ printk(KERN_INFO "macio: fixed left floppy irqs\n");
+ }
+ if (dev->media_bay != NULL && strcasecmp(np->name, "ata4") == 0) {
+ macio_create_fixup_irq(dev, 0, 14 + irq_base);
+ macio_create_fixup_irq(dev, 0, 3 + irq_base);
+ printk(KERN_INFO "macio: fixed left ide irqs\n");
+ }
+}
+
+static void macio_setup_interrupts(struct macio_dev *dev)
+{
+ struct device_node *np = dev->ofdev.node;
+ unsigned int irq;
+ int i = 0, j = 0;
+
+ for (;;) {
struct resource *res = &dev->interrupt[j];
if (j >= MACIO_DEV_COUNT_IRQS)
break;
- res->start = np->intrs[i].line;
- res->flags = IORESOURCE_IO;
- if (np->intrs[j].sense)
- res->flags |= IORESOURCE_IRQ_LOWLEVEL;
- else
- res->flags |= IORESOURCE_IRQ_HIGHEDGE;
+ irq = irq_of_parse_and_map(np, i++);
+ if (irq == NO_IRQ)
+ break;
+ res->start = irq;
+ res->flags = IORESOURCE_IRQ;
res->name = dev->ofdev.dev.bus_id;
- if (macio_resource_quirks(np, res, i))
+ if (macio_resource_quirks(np, res, i - 1)) {
memset(res, 0, sizeof(struct resource));
- else
+ continue;
+ } else
j++;
}
dev->n_interrupts = j;
@@ -445,6 +498,7 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip,
/* Setup interrupts & resources */
macio_setup_interrupts(dev);
macio_setup_resources(dev, parent_res);
+ macio_add_missing_resources(dev);
/* Register with core */
if (of_device_register(&dev->ofdev) != 0) {
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index ff6d9bfdc3d2..f139a74696fe 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -497,8 +497,7 @@ int __init smu_init (void)
smu->doorbell = *data;
if (smu->doorbell < 0x50)
smu->doorbell += 0x50;
- if (np->n_intrs > 0)
- smu->db_irq = np->intrs[0].line;
+ smu->db_irq = irq_of_parse_and_map(np, 0);
of_node_put(np);
@@ -515,8 +514,7 @@ int __init smu_init (void)
smu->msg = *data;
if (smu->msg < 0x50)
smu->msg += 0x50;
- if (np->n_intrs > 0)
- smu->msg_irq = np->intrs[0].line;
+ smu->msg_irq = irq_of_parse_and_map(np, 0);
of_node_put(np);
} while(0);
diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c
index 6501db50fb83..69d5452fd22f 100644
--- a/drivers/macintosh/via-cuda.c
+++ b/drivers/macintosh/via-cuda.c
@@ -34,13 +34,6 @@
static volatile unsigned char __iomem *via;
static DEFINE_SPINLOCK(cuda_lock);
-#ifdef CONFIG_MAC
-#define CUDA_IRQ IRQ_MAC_ADB
-#define eieio()
-#else
-#define CUDA_IRQ vias->intrs[0].line
-#endif
-
/* VIA registers - spaced 0x200 bytes apart */
#define RS 0x200 /* skip between registers */
#define B 0 /* B-side data */
@@ -189,11 +182,24 @@ int __init find_via_cuda(void)
static int __init via_cuda_start(void)
{
+ unsigned int irq;
+
if (via == NULL)
return -ENODEV;
- if (request_irq(CUDA_IRQ, cuda_interrupt, 0, "ADB", cuda_interrupt)) {
- printk(KERN_ERR "cuda_init: can't get irq %d\n", CUDA_IRQ);
+#ifdef CONFIG_MAC
+ irq = IRQ_MAC_ADB;
+#else /* CONFIG_MAC */
+ irq = irq_of_parse_and_map(vias, 0);
+ if (irq == NO_IRQ) {
+ printk(KERN_ERR "via-cuda: can't map interrupts for %s\n",
+ vias->full_name);
+ return -ENODEV;
+ }
+#endif /* CONFIG_MAP */
+
+ if (request_irq(irq, cuda_interrupt, 0, "ADB", cuda_interrupt)) {
+ printk(KERN_ERR "via-cuda: can't request irq %d\n", irq);
return -EAGAIN;
}
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index c1193d34ec9e..06ca80bfd6b9 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -64,10 +64,6 @@
#include <asm/backlight.h>
#endif
-#ifdef CONFIG_PPC32
-#include <asm/open_pic.h>
-#endif
-
#include "via-pmu-event.h"
/* Some compile options */
@@ -151,7 +147,7 @@ static int pmu_fully_inited = 0;
static int pmu_has_adb;
static struct device_node *gpio_node;
static unsigned char __iomem *gpio_reg = NULL;
-static int gpio_irq = -1;
+static int gpio_irq = NO_IRQ;
static int gpio_irq_enabled = -1;
static volatile int pmu_suspended = 0;
static spinlock_t pmu_lock;
@@ -403,22 +399,21 @@ static int __init pmu_init(void)
*/
static int __init via_pmu_start(void)
{
+ unsigned int irq;
+
if (vias == NULL)
return -ENODEV;
batt_req.complete = 1;
-#ifndef CONFIG_PPC_MERGE
- if (pmu_kind == PMU_KEYLARGO_BASED)
- openpic_set_irq_priority(vias->intrs[0].line,
- OPENPIC_PRIORITY_DEFAULT + 1);
-#endif
-
- if (request_irq(vias->intrs[0].line, via_pmu_interrupt, 0, "VIA-PMU",
- (void *)0)) {
- printk(KERN_ERR "VIA-PMU: can't get irq %d\n",
- vias->intrs[0].line);
- return -EAGAIN;
+ irq = irq_of_parse_and_map(vias, 0);
+ if (irq == NO_IRQ) {
+ printk(KERN_ERR "via-pmu: can't map interruptn");
+ return -ENODEV;
+ }
+ if (request_irq(irq, via_pmu_interrupt, 0, "VIA-PMU", (void *)0)) {
+ printk(KERN_ERR "via-pmu: can't request irq %d\n", irq);
+ return -ENODEV;
}
if (pmu_kind == PMU_KEYLARGO_BASED) {
@@ -426,10 +421,10 @@ static int __init via_pmu_start(void)
if (gpio_node == NULL)
gpio_node = of_find_node_by_name(NULL,
"pmu-interrupt");
- if (gpio_node && gpio_node->n_intrs > 0)
- gpio_irq = gpio_node->intrs[0].line;
+ if (gpio_node)
+ gpio_irq = irq_of_parse_and_map(gpio_node, 0);
- if (gpio_irq != -1) {
+ if (gpio_irq != NO_IRQ) {
if (request_irq(gpio_irq, gpio1_interrupt, 0,
"GPIO1 ADB", (void *)0))
printk(KERN_ERR "pmu: can't get irq %d"
diff --git a/drivers/net/mace.c b/drivers/net/mace.c
index f2c0bf89f0c7..29e4b5aa6ead 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/mace.c
@@ -242,12 +242,12 @@ static int __devinit mace_probe(struct macio_dev *mdev, const struct of_device_i
}
rc = request_irq(mp->tx_dma_intr, mace_txdma_intr, 0, "MACE-txdma", dev);
if (rc) {
- printk(KERN_ERR "MACE: can't get irq %d\n", mace->intrs[1].line);
+ printk(KERN_ERR "MACE: can't get irq %d\n", mp->tx_dma_intr);
goto err_free_irq;
}
rc = request_irq(mp->rx_dma_intr, mace_rxdma_intr, 0, "MACE-rxdma", dev);
if (rc) {
- printk(KERN_ERR "MACE: can't get irq %d\n", mace->intrs[2].line);
+ printk(KERN_ERR "MACE: can't get irq %d\n", mp->rx_dma_intr);
goto err_free_tx_irq;
}
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 459c0231aef3..bfd2a22759eb 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1443,8 +1443,8 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
goto no_dma;
}
- uap->tx_dma_irq = np->intrs[1].line;
- uap->rx_dma_irq = np->intrs[2].line;
+ uap->tx_dma_irq = irq_of_parse_and_map(np, 1);
+ uap->rx_dma_irq = irq_of_parse_and_map(np, 2);
}
no_dma:
@@ -1491,7 +1491,7 @@ no_dma:
* Init remaining bits of "port" structure
*/
uap->port.iotype = UPIO_MEM;
- uap->port.irq = np->intrs[0].line;
+ uap->port.irq = irq_of_parse_and_map(np, 0);
uap->port.uartclk = ZS_CLOCK;
uap->port.fifosize = 1;
uap->port.ops = &pmz_pops;
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index bfeb11bd4712..71ce1fa45cf4 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -97,14 +97,43 @@ static int offb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
u_int transp, struct fb_info *info)
{
struct offb_par *par = (struct offb_par *) info->par;
+ int i, depth;
+ u32 *pal = info->pseudo_palette;
- if (!par->cmap_adr || regno > 255)
+ depth = info->var.bits_per_pixel;
+ if (depth == 16)
+ depth = (info->var.green.length == 5) ? 15 : 16;
+
+ if (regno > 255 ||
+ (depth == 16 && regno > 63) ||
+ (depth == 15 && regno > 31))
return 1;
+ if (regno < 16) {
+ switch (depth) {
+ case 15:
+ pal[regno] = (regno << 10) | (regno << 5) | regno;
+ break;
+ case 16:
+ pal[regno] = (regno << 11) | (regno << 5) | regno;
+ break;
+ case 24:
+ pal[regno] = (regno << 16) | (regno << 8) | regno;
+ break;
+ case 32:
+ i = (regno << 8) | regno;
+ pal[regno] = (i << 16) | i;
+ break;
+ }
+ }
+
red >>= 8;
green >>= 8;
blue >>= 8;
+ if (!par->cmap_adr)
+ return 0;
+
switch (par->cmap_type) {
case cmap_m64:
writeb(regno, par->cmap_adr);
@@ -141,20 +170,6 @@ static int offb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
break;
}
- if (regno < 16)
- switch (info->var.bits_per_pixel) {
- case 16:
- ((u16 *) (info->pseudo_palette))[regno] =
- (regno << 10) | (regno << 5) | regno;
- break;
- case 32:
- {
- int i = (regno << 8) | regno;
- ((u32 *) (info->pseudo_palette))[regno] =
- (i << 16) | i;
- break;
- }
- }
return 0;
}
@@ -223,81 +238,9 @@ int __init offb_init(void)
{
struct device_node *dp = NULL, *boot_disp = NULL;
-#if defined(CONFIG_BOOTX_TEXT) && defined(CONFIG_PPC32)
- struct device_node *macos_display = NULL;
-#endif
if (fb_get_options("offb", NULL))
return -ENODEV;
-#if defined(CONFIG_BOOTX_TEXT) && defined(CONFIG_PPC32)
- /* If we're booted from BootX... */
- if (boot_infos != 0) {
- unsigned long addr =
- (unsigned long) boot_infos->dispDeviceBase;
- u32 *addrp;
- u64 daddr, dsize;
- unsigned int flags;
-
- /* find the device node corresponding to the macos display */
- while ((dp = of_find_node_by_type(dp, "display"))) {
- int i;
-
- /*
- * Look for an AAPL,address property first.
- */
- unsigned int na;
- unsigned int *ap =
- (unsigned int *)get_property(dp, "AAPL,address",
- &na);
- if (ap != 0) {
- for (na /= sizeof(unsigned int); na > 0;
- --na, ++ap)
- if (*ap <= addr &&
- addr < *ap + 0x1000000) {
- macos_display = dp;
- goto foundit;
- }
- }
-
- /*
- * See if the display address is in one of the address
- * ranges for this display.
- */
- i = 0;
- for (;;) {
- addrp = of_get_address(dp, i++, &dsize, &flags);
- if (addrp == NULL)
- break;
- if (!(flags & IORESOURCE_MEM))
- continue;
- daddr = of_translate_address(dp, addrp);
- if (daddr == OF_BAD_ADDR)
- continue;
- if (daddr <= addr && addr < (daddr + dsize)) {
- macos_display = dp;
- goto foundit;
- }
- }
- foundit:
- if (macos_display) {
- printk(KERN_INFO "MacOS display is %s\n",
- dp->full_name);
- break;
- }
- }
-
- /* initialize it */
- offb_init_fb(macos_display ? macos_display->
- name : "MacOS display",
- macos_display ? macos_display->
- full_name : "MacOS display",
- boot_infos->dispDeviceRect[2],
- boot_infos->dispDeviceRect[3],
- boot_infos->dispDeviceDepth,
- boot_infos->dispDeviceRowBytes, addr, NULL);
- }
-#endif /* defined(CONFIG_BOOTX_TEXT) && defined(CONFIG_PPC32) */
-
for (dp = NULL; (dp = of_find_node_by_type(dp, "display"));) {
if (get_property(dp, "linux,opened", NULL) &&
get_property(dp, "linux,boot-display", NULL)) {
@@ -317,94 +260,93 @@ int __init offb_init(void)
static void __init offb_init_nodriver(struct device_node *dp)
{
- int *pp, i;
unsigned int len;
- int width = 640, height = 480, depth = 8, pitch;
- unsigned int flags, rsize, *up;
- u64 address = OF_BAD_ADDR;
- u32 *addrp;
+ int i, width = 640, height = 480, depth = 8, pitch = 640;
+ unsigned int flags, rsize, addr_prop = 0;
+ unsigned long max_size = 0;
+ u64 rstart, address = OF_BAD_ADDR;
+ u32 *pp, *addrp, *up;
u64 asize;
- if ((pp = (int *) get_property(dp, "depth", &len)) != NULL
- && len == sizeof(int))
+ pp = (u32 *)get_property(dp, "linux,bootx-depth", &len);
+ if (pp == NULL)
+ pp = (u32 *)get_property(dp, "depth", &len);
+ if (pp && len == sizeof(u32))
depth = *pp;
- if ((pp = (int *) get_property(dp, "width", &len)) != NULL
- && len == sizeof(int))
+
+ pp = (u32 *)get_property(dp, "linux,bootx-width", &len);
+ if (pp == NULL)
+ pp = (u32 *)get_property(dp, "width", &len);
+ if (pp && len == sizeof(u32))
width = *pp;
- if ((pp = (int *) get_property(dp, "height", &len)) != NULL
- && len == sizeof(int))
+
+ pp = (u32 *)get_property(dp, "linux,bootx-height", &len);
+ if (pp == NULL)
+ pp = (u32 *)get_property(dp, "height", &len);
+ if (pp && len == sizeof(u32))
height = *pp;
- if ((pp = (int *) get_property(dp, "linebytes", &len)) != NULL
- && len == sizeof(int)) {
+
+ pp = (u32 *)get_property(dp, "linux,bootx-linebytes", &len);
+ if (pp == NULL)
+ pp = (u32 *)get_property(dp, "linebytes", &len);
+ if (pp && len == sizeof(u32))
pitch = *pp;
- if (pitch == 1)
- pitch = 0x1000;
- } else
- pitch = width;
-
- rsize = (unsigned long)pitch * (unsigned long)height *
- (unsigned long)(depth / 8);
-
- /* Try to match device to a PCI device in order to get a properly
- * translated address rather then trying to decode the open firmware
- * stuff in various incorrect ways
- */
-#ifdef CONFIG_PCI
- /* First try to locate the PCI device if any */
- {
- struct pci_dev *pdev = NULL;
-
- for_each_pci_dev(pdev) {
- if (dp == pci_device_to_OF_node(pdev))
- break;
- }
- if (pdev) {
- for (i = 0; i < 6 && address == OF_BAD_ADDR; i++) {
- if ((pci_resource_flags(pdev, i) &
- IORESOURCE_MEM) &&
- (pci_resource_len(pdev, i) >= rsize))
- address = pci_resource_start(pdev, i);
- }
- pci_dev_put(pdev);
- }
- }
-#endif /* CONFIG_PCI */
-
- /* This one is dodgy, we may drop it ... */
- if (address == OF_BAD_ADDR &&
- (up = (unsigned *) get_property(dp, "address", &len)) != NULL &&
- len == sizeof(unsigned int))
- address = (u64) * up;
-
- if (address == OF_BAD_ADDR) {
- for (i = 0; (addrp = of_get_address(dp, i, &asize, &flags))
- != NULL; i++) {
- if (!(flags & IORESOURCE_MEM))
- continue;
- if (asize >= pitch * height * depth / 8)
- break;
- }
- if (addrp == NULL) {
- printk(KERN_ERR
- "no framebuffer address found for %s\n",
- dp->full_name);
- return;
- }
- address = of_translate_address(dp, addrp);
- if (address == OF_BAD_ADDR) {
- printk(KERN_ERR
- "can't translate framebuffer address for %s\n",
- dp->full_name);
- return;
+ else
+ pitch = width * ((depth + 7) / 8);
+
+ rsize = (unsigned long)pitch * (unsigned long)height;
+
+ /* Ok, now we try to figure out the address of the framebuffer.
+ *
+ * Unfortunately, Open Firmware doesn't provide a standard way to do
+ * so. All we can do is a dodgy heuristic that happens to work in
+ * practice. On most machines, the "address" property contains what
+ * we need, though not on Matrox cards found in IBM machines. What I've
+ * found that appears to give good results is to go through the PCI
+ * ranges and pick one that is both big enough and if possible encloses
+ * the "address" property. If none match, we pick the biggest
+ */
+ up = (u32 *)get_property(dp, "linux,bootx-addr", &len);
+ if (up == NULL)
+ up = (u32 *)get_property(dp, "address", &len);
+ if (up && len == sizeof(u32))
+ addr_prop = *up;
+
+ for (i = 0; (addrp = of_get_address(dp, i, &asize, &flags))
+ != NULL; i++) {
+ int match_addrp = 0;
+
+ if (!(flags & IORESOURCE_MEM))
+ continue;
+ if (asize < rsize)
+ continue;
+ rstart = of_translate_address(dp, addrp);
+ if (rstart == OF_BAD_ADDR)
+ continue;
+ if (addr_prop && (rstart <= addr_prop) &&
+ ((rstart + asize) >= (addr_prop + rsize)))
+ match_addrp = 1;
+ if (match_addrp) {
+ address = addr_prop;
+ break;
}
+ if (rsize > max_size) {
+ max_size = rsize;
+ address = OF_BAD_ADDR;
+ }
+ if (address == OF_BAD_ADDR)
+ address = rstart;
+ }
+ if (address == OF_BAD_ADDR && addr_prop)
+ address = (u64)addr_prop;
+ if (address != OF_BAD_ADDR) {
/* kludge for valkyrie */
if (strcmp(dp->name, "valkyrie") == 0)
address += 0x1000;
+ offb_init_fb(dp->name, dp->full_name, width, height, depth,
+ pitch, address, dp);
}
- offb_init_fb(dp->name, dp->full_name, width, height, depth,
- pitch, address, dp);
-
}
static void __init offb_init_fb(const char *name, const char *full_name,
@@ -412,7 +354,7 @@ static void __init offb_init_fb(const char *name, const char *full_name,
int pitch, unsigned long address,
struct device_node *dp)
{
- unsigned long res_size = pitch * height * depth / 8;
+ unsigned long res_size = pitch * height * (depth + 7) / 8;
struct offb_par *par = &default_par;
unsigned long res_start = address;
struct fb_fix_screeninfo *fix;
@@ -426,7 +368,7 @@ static void __init offb_init_fb(const char *name, const char *full_name,
printk(KERN_INFO
"Using unsupported %dx%d %s at %lx, depth=%d, pitch=%d\n",
width, height, name, address, depth, pitch);
- if (depth != 8 && depth != 16 && depth != 32) {
+ if (depth != 8 && depth != 15 && depth != 16 && depth != 32) {
printk(KERN_ERR "%s: can't use depth = %d\n", full_name,
depth);
release_mem_region(res_start, res_size);
@@ -502,7 +444,6 @@ static void __init offb_init_fb(const char *name, const char *full_name,
: */ FB_VISUAL_TRUECOLOR;
var->xoffset = var->yoffset = 0;
- var->bits_per_pixel = depth;
switch (depth) {
case 8:
var->bits_per_pixel = 8;
@@ -515,7 +456,7 @@ static void __init offb_init_fb(const char *name, const char *full_name,
var->transp.offset = 0;
var->transp.length = 0;
break;
- case 16: /* RGB 555 */
+ case 15: /* RGB 555 */
var->bits_per_pixel = 16;
var->red.offset = 10;
var->red.length = 5;
@@ -526,6 +467,17 @@ static void __init offb_init_fb(const char *name, const char *full_name,
var->transp.offset = 0;
var->transp.length = 0;
break;
+ case 16: /* RGB 565 */
+ var->bits_per_pixel = 16;
+ var->red.offset = 11;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 6;
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
case 32: /* RGB 888 */
var->bits_per_pixel = 32;
var->red.offset = 16;
diff --git a/include/asm-powerpc/i8259.h b/include/asm-powerpc/i8259.h
index 0392159e16e4..c80e113052cd 100644
--- a/include/asm-powerpc/i8259.h
+++ b/include/asm-powerpc/i8259.h
@@ -4,11 +4,13 @@
#include <linux/irq.h>
-extern struct hw_interrupt_type i8259_pic;
-
+#ifdef CONFIG_PPC_MERGE
+extern void i8259_init(struct device_node *node, unsigned long intack_addr);
+extern unsigned int i8259_irq(struct pt_regs *regs);
+#else
extern void i8259_init(unsigned long intack_addr, int offset);
extern int i8259_irq(struct pt_regs *regs);
-extern int i8259_irq_cascade(struct pt_regs *regs, void *unused);
+#endif
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_I8259_H */
diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h
index eb5f33e1977a..e05754752028 100644
--- a/include/asm-powerpc/irq.h
+++ b/include/asm-powerpc/irq.h
@@ -9,26 +9,14 @@
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/config.h>
#include <linux/threads.h>
+#include <linux/list.h>
+#include <linux/radix-tree.h>
#include <asm/types.h>
#include <asm/atomic.h>
-/* this number is used when no interrupt has been assigned */
-#define NO_IRQ (-1)
-
-/*
- * These constants are used for passing information about interrupt
- * signal polarity and level/edge sensing to the low-level PIC chip
- * drivers.
- */
-#define IRQ_SENSE_MASK 0x1
-#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */
-#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */
-
-#define IRQ_POLARITY_MASK 0x2
-#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */
-#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */
#define get_irq_desc(irq) (&irq_desc[(irq)])
@@ -36,50 +24,325 @@
#define for_each_irq(i) \
for ((i) = 0; (i) < NR_IRQS; ++(i))
-#ifdef CONFIG_PPC64
+extern atomic_t ppc_n_lost_interrupts;
-/*
- * Maximum number of interrupt sources that we can handle.
+#ifdef CONFIG_PPC_MERGE
+
+/* This number is used when no interrupt has been assigned */
+#define NO_IRQ (0)
+
+/* This is a special irq number to return from get_irq() to tell that
+ * no interrupt happened _and_ ignore it (don't count it as bad). Some
+ * platforms like iSeries rely on that.
*/
+#define NO_IRQ_IGNORE ((unsigned int)-1)
+
+/* Total number of virq in the platform (make it a CONFIG_* option ? */
#define NR_IRQS 512
-/* Interrupt numbers are virtual in case they are sparsely
- * distributed by the hardware.
+/* Number of irqs reserved for the legacy controller */
+#define NUM_ISA_INTERRUPTS 16
+
+/* This type is the placeholder for a hardware interrupt number. It has to
+ * be big enough to enclose whatever representation is used by a given
+ * platform.
+ */
+typedef unsigned long irq_hw_number_t;
+
+/* Interrupt controller "host" data structure. This could be defined as a
+ * irq domain controller. That is, it handles the mapping between hardware
+ * and virtual interrupt numbers for a given interrupt domain. The host
+ * structure is generally created by the PIC code for a given PIC instance
+ * (though a host can cover more than one PIC if they have a flat number
+ * model). It's the host callbacks that are responsible for setting the
+ * irq_chip on a given irq_desc after it's been mapped.
+ *
+ * The host code and data structures are fairly agnostic to the fact that
+ * we use an open firmware device-tree. We do have references to struct
+ * device_node in two places: in irq_find_host() to find the host matching
+ * a given interrupt controller node, and of course as an argument to its
+ * counterpart host->ops->match() callback. However, those are treated as
+ * generic pointers by the core and the fact that it's actually a device-node
+ * pointer is purely a convention between callers and implementation. This
+ * code could thus be used on other architectures by replacing those two
+ * by some sort of arch-specific void * "token" used to identify interrupt
+ * controllers.
*/
-extern unsigned int virt_irq_to_real_map[NR_IRQS];
+struct irq_host;
+struct radix_tree_root;
-/* The maximum virtual IRQ number that we support. This
- * can be set by the platform and will be reduced by the
- * value of __irq_offset_value. It defaults to and is
- * capped by (NR_IRQS - 1).
+/* Functions below are provided by the host and called whenever a new mapping
+ * is created or an old mapping is disposed. The host can then proceed to
+ * whatever internal data structures management is required. It also needs
+ * to setup the irq_desc when returning from map().
*/
-extern unsigned int virt_irq_max;
+struct irq_host_ops {
+ /* Match an interrupt controller device node to a host, returns
+ * 1 on a match
+ */
+ int (*match)(struct irq_host *h, struct device_node *node);
+
+ /* Create or update a mapping between a virtual irq number and a hw
+ * irq number. This can be called several times for the same mapping
+ * but with different flags, though unmap shall always be called
+ * before the virq->hw mapping is changed.
+ */
+ int (*map)(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw, unsigned int flags);
+
+ /* Dispose of such a mapping */
+ void (*unmap)(struct irq_host *h, unsigned int virq);
+
+ /* Translate device-tree interrupt specifier from raw format coming
+ * from the firmware to a irq_hw_number_t (interrupt line number) and
+ * trigger flags that can be passed to irq_create_mapping().
+ * If no translation is provided, raw format is assumed to be one cell
+ * for interrupt line and default sense.
+ */
+ int (*xlate)(struct irq_host *h, struct device_node *ctrler,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_flags);
+};
+
+struct irq_host {
+ struct list_head link;
+
+ /* type of reverse mapping technique */
+ unsigned int revmap_type;
+#define IRQ_HOST_MAP_LEGACY 0 /* legacy 8259, gets irqs 1..15 */
+#define IRQ_HOST_MAP_NOMAP 1 /* no fast reverse mapping */
+#define IRQ_HOST_MAP_LINEAR 2 /* linear map of interrupts */
+#define IRQ_HOST_MAP_TREE 3 /* radix tree */
+ union {
+ struct {
+ unsigned int size;
+ unsigned int *revmap;
+ } linear;
+ struct radix_tree_root tree;
+ } revmap_data;
+ struct irq_host_ops *ops;
+ void *host_data;
+ irq_hw_number_t inval_irq;
+};
+
+/* The main irq map itself is an array of NR_IRQ entries containing the
+ * associate host and irq number. An entry with a host of NULL is free.
+ * An entry can be allocated if it's free, the allocator always then sets
+ * hwirq first to the host's invalid irq number and then fills ops.
+ */
+struct irq_map_entry {
+ irq_hw_number_t hwirq;
+ struct irq_host *host;
+};
+
+extern struct irq_map_entry irq_map[NR_IRQS];
+
-/* Create a mapping for a real_irq if it doesn't already exist.
- * Return the virtual irq as a convenience.
+/***
+ * irq_alloc_host - Allocate a new irq_host data structure
+ * @node: device-tree node of the interrupt controller
+ * @revmap_type: type of reverse mapping to use
+ * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
+ * @ops: map/unmap host callbacks
+ * @inval_irq: provide a hw number in that host space that is always invalid
+ *
+ * Allocates and initialize and irq_host structure. Note that in the case of
+ * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns
+ * for all legacy interrupts except 0 (which is always the invalid irq for
+ * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by
+ * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated
+ * later during boot automatically (the reverse mapping will use the slow path
+ * until that happens).
+ */
+extern struct irq_host *irq_alloc_host(unsigned int revmap_type,
+ unsigned int revmap_arg,
+ struct irq_host_ops *ops,
+ irq_hw_number_t inval_irq);
+
+
+/***
+ * irq_find_host - Locates a host for a given device node
+ * @node: device-tree node of the interrupt controller
+ */
+extern struct irq_host *irq_find_host(struct device_node *node);
+
+
+/***
+ * irq_set_default_host - Set a "default" host
+ * @host: default host pointer
+ *
+ * For convenience, it's possible to set a "default" host that will be used
+ * whenever NULL is passed to irq_create_mapping(). It makes life easier for
+ * platforms that want to manipulate a few hard coded interrupt numbers that
+ * aren't properly represented in the device-tree.
+ */
+extern void irq_set_default_host(struct irq_host *host);
+
+
+/***
+ * irq_set_virq_count - Set the maximum number of virt irqs
+ * @count: number of linux virtual irqs, capped with NR_IRQS
+ *
+ * This is mainly for use by platforms like iSeries who want to program
+ * the virtual irq number in the controller to avoid the reverse mapping
+ */
+extern void irq_set_virq_count(unsigned int count);
+
+
+/***
+ * irq_create_mapping - Map a hardware interrupt into linux virq space
+ * @host: host owning this hardware interrupt or NULL for default host
+ * @hwirq: hardware irq number in that host space
+ * @flags: flags passed to the controller. contains the trigger type among
+ * others. Use IRQ_TYPE_* defined in include/linux/irq.h
+ *
+ * Only one mapping per hardware interrupt is permitted. Returns a linux
+ * virq number. The flags can be used to provide sense information to the
+ * controller (typically extracted from the device-tree). If no information
+ * is passed, the controller defaults will apply (for example, xics can only
+ * do edge so flags are irrelevant for some pseries specific irqs).
+ *
+ * The device-tree generally contains the trigger info in an encoding that is
+ * specific to a given type of controller. In that case, you can directly use
+ * host->ops->trigger_xlate() to translate that.
+ *
+ * It is recommended that new PICs that don't have existing OF bindings chose
+ * to use a representation of triggers identical to linux.
+ */
+extern unsigned int irq_create_mapping(struct irq_host *host,
+ irq_hw_number_t hwirq,
+ unsigned int flags);
+
+
+/***
+ * irq_dispose_mapping - Unmap an interrupt
+ * @virq: linux virq number of the interrupt to unmap
+ */
+extern void irq_dispose_mapping(unsigned int virq);
+
+/***
+ * irq_find_mapping - Find a linux virq from an hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a slow path, for use by generic code. It's expected that an
+ * irq controller implementation directly calls the appropriate low level
+ * mapping function.
*/
-int virt_irq_create_mapping(unsigned int real_irq);
-void virt_irq_init(void);
+extern unsigned int irq_find_mapping(struct irq_host *host,
+ irq_hw_number_t hwirq);
-static inline unsigned int virt_irq_to_real(unsigned int virt_irq)
+
+/***
+ * irq_radix_revmap - Find a linux virq from a hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a fast path, for use by irq controller code that uses radix tree
+ * revmaps
+ */
+extern unsigned int irq_radix_revmap(struct irq_host *host,
+ irq_hw_number_t hwirq);
+
+/***
+ * irq_linear_revmap - Find a linux virq from a hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a fast path, for use by irq controller code that uses linear
+ * revmaps. It does fallback to the slow path if the revmap doesn't exist
+ * yet and will create the revmap entry with appropriate locking
+ */
+
+extern unsigned int irq_linear_revmap(struct irq_host *host,
+ irq_hw_number_t hwirq);
+
+
+
+/***
+ * irq_alloc_virt - Allocate virtual irq numbers
+ * @host: host owning these new virtual irqs
+ * @count: number of consecutive numbers to allocate
+ * @hint: pass a hint number, the allocator will try to use a 1:1 mapping
+ *
+ * This is a low level function that is used internally by irq_create_mapping()
+ * and that can be used by some irq controllers implementations for things
+ * like allocating ranges of numbers for MSIs. The revmaps are left untouched.
+ */
+extern unsigned int irq_alloc_virt(struct irq_host *host,
+ unsigned int count,
+ unsigned int hint);
+
+/***
+ * irq_free_virt - Free virtual irq numbers
+ * @virq: virtual irq number of the first interrupt to free
+ * @count: number of interrupts to free
+ *
+ * This function is the opposite of irq_alloc_virt. It will not clear reverse
+ * maps, this should be done previously by unmap'ing the interrupt. In fact,
+ * all interrupts covered by the range being freed should have been unmapped
+ * prior to calling this.
+ */
+extern void irq_free_virt(unsigned int virq, unsigned int count);
+
+
+/* -- OF helpers -- */
+
+/* irq_create_of_mapping - Map a hardware interrupt into linux virq space
+ * @controller: Device node of the interrupt controller
+ * @inspec: Interrupt specifier from the device-tree
+ * @intsize: Size of the interrupt specifier from the device-tree
+ *
+ * This function is identical to irq_create_mapping except that it takes
+ * as input informations straight from the device-tree (typically the results
+ * of the of_irq_map_*() functions
+ */
+extern unsigned int irq_create_of_mapping(struct device_node *controller,
+ u32 *intspec, unsigned int intsize);
+
+
+/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space
+ * @device: Device node of the device whose interrupt is to be mapped
+ * @index: Index of the interrupt to map
+ *
+ * This function is a wrapper that chains of_irq_map_one() and
+ * irq_create_of_mapping() to make things easier to callers
+ */
+extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);
+
+/* -- End OF helpers -- */
+
+/***
+ * irq_early_init - Init irq remapping subsystem
+ */
+extern void irq_early_init(void);
+
+static __inline__ int irq_canonicalize(int irq)
{
- return virt_irq_to_real_map[virt_irq];
+ return irq;
}
-extern unsigned int real_irq_to_virt_slowpath(unsigned int real_irq);
+
+#else /* CONFIG_PPC_MERGE */
+
+/* This number is used when no interrupt has been assigned */
+#define NO_IRQ (-1)
+#define NO_IRQ_IGNORE (-2)
+
/*
- * List of interrupt controllers.
+ * These constants are used for passing information about interrupt
+ * signal polarity and level/edge sensing to the low-level PIC chip
+ * drivers.
*/
-#define IC_INVALID 0
-#define IC_OPEN_PIC 1
-#define IC_PPC_XIC 2
-#define IC_CELL_PIC 3
-#define IC_ISERIES 4
+#define IRQ_SENSE_MASK 0x1
+#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */
+#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */
-extern u64 ppc64_interrupt_controller;
+#define IRQ_POLARITY_MASK 0x2
+#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */
+#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */
-#else /* 32-bit */
#if defined(CONFIG_40x)
#include <asm/ibm4xx.h>
@@ -512,16 +775,11 @@ extern u64 ppc64_interrupt_controller;
#endif /* CONFIG_8260 */
-#endif
+#endif /* Whatever way too big #ifdef */
#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
/* pedantic: these are long because they are used with set_bit --RR */
extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-extern atomic_t ppc_n_lost_interrupts;
-
-#define virt_irq_create_mapping(x) (x)
-
-#endif
/*
* Because many systems have two overlapping names spaces for
@@ -560,6 +818,7 @@ static __inline__ int irq_canonicalize(int irq)
irq = 9;
return irq;
}
+#endif /* CONFIG_PPC_MERGE */
extern int distribute_irqs;
@@ -579,9 +838,8 @@ extern struct thread_info *softirq_ctx[NR_CPUS];
extern void irq_ctx_init(void);
extern void call_do_softirq(struct thread_info *tp);
-extern int call___do_IRQ(int irq, struct pt_regs *regs,
- struct thread_info *tp);
-
+extern int call_handle_irq(int irq, void *p1, void *p2,
+ struct thread_info *tp, void *func);
#else
#define irq_ctx_init()
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index eba133d149a7..c17c13742401 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -97,7 +97,7 @@ struct machdep_calls {
void (*show_percpuinfo)(struct seq_file *m, int i);
void (*init_IRQ)(void);
- int (*get_irq)(struct pt_regs *);
+ unsigned int (*get_irq)(struct pt_regs *);
#ifdef CONFIG_KEXEC
void (*kexec_cpu_down)(int crash_shutdown, int secondary);
#endif
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h
index f0d22ac34b96..eb241c99c457 100644
--- a/include/asm-powerpc/mpic.h
+++ b/include/asm-powerpc/mpic.h
@@ -114,9 +114,6 @@
#define MPIC_VEC_TIMER_1 248
#define MPIC_VEC_TIMER_0 247
-/* Type definition of the cascade handler */
-typedef int (*mpic_cascade_t)(struct pt_regs *regs, void *data);
-
#ifdef CONFIG_MPIC_BROKEN_U3
/* Fixup table entry */
struct mpic_irq_fixup
@@ -132,10 +129,19 @@ struct mpic_irq_fixup
/* The instance data of a given MPIC */
struct mpic
{
+ /* The device node of the interrupt controller */
+ struct device_node *of_node;
+
+ /* The remapper for this MPIC */
+ struct irq_host *irqhost;
+
/* The "linux" controller struct */
- hw_irq_controller hc_irq;
+ struct irq_chip hc_irq;
+#ifdef CONFIG_MPIC_BROKEN_U3
+ struct irq_chip hc_ht_irq;
+#endif
#ifdef CONFIG_SMP
- hw_irq_controller hc_ipi;
+ struct irq_chip hc_ipi;
#endif
const char *name;
/* Flags */
@@ -144,20 +150,12 @@ struct mpic
unsigned int isu_size;
unsigned int isu_shift;
unsigned int isu_mask;
- /* Offset of irq vector numbers */
- unsigned int irq_offset;
unsigned int irq_count;
- /* Offset of ipi vector numbers */
- unsigned int ipi_offset;
/* Number of sources */
unsigned int num_sources;
/* Number of CPUs */
unsigned int num_cpus;
- /* cascade handler */
- mpic_cascade_t cascade;
- void *cascade_data;
- unsigned int cascade_vec;
- /* senses array */
+ /* default senses array */
unsigned char *senses;
unsigned int senses_count;
@@ -213,14 +211,11 @@ struct mpic
* The values in the array start at the first source of the MPIC,
* that is senses[0] correspond to linux irq "irq_offset".
*/
-extern struct mpic *mpic_alloc(unsigned long phys_addr,
+extern struct mpic *mpic_alloc(struct device_node *node,
+ unsigned long phys_addr,
unsigned int flags,
unsigned int isu_size,
- unsigned int irq_offset,
unsigned int irq_count,
- unsigned int ipi_offset,
- unsigned char *senses,
- unsigned int senses_num,
const char *name);
/* Assign ISUs, to call before mpic_init()
@@ -232,22 +227,27 @@ extern struct mpic *mpic_alloc(unsigned long phys_addr,
extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
unsigned long phys_addr);
+/* Set default sense codes
+ *
+ * @mpic: controller
+ * @senses: array of sense codes
+ * @count: size of above array
+ *
+ * Optionally provide an array (indexed on hardware interrupt numbers
+ * for this MPIC) of default sense codes for the chip. Those are linux
+ * sense codes IRQ_TYPE_*
+ *
+ * The driver gets ownership of the pointer, don't dispose of it or
+ * anything like that. __init only.
+ */
+extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count);
+
+
/* Initialize the controller. After this has been called, none of the above
* should be called again for this mpic
*/
extern void mpic_init(struct mpic *mpic);
-/* Setup a cascade. Currently, only one cascade is supported this
- * way, though you can always do a normal request_irq() and add
- * other cascades this way. You should call this _after_ having
- * added all the ISUs
- *
- * @irq_no: "linux" irq number of the cascade (that is offset'ed vector)
- * @handler: cascade handler function
- */
-extern void mpic_setup_cascade(unsigned int irq_no, mpic_cascade_t hanlder,
- void *data);
-
/*
* All of the following functions must only be used after the
* ISUs have been assigned and the controller fully initialized
@@ -284,9 +284,9 @@ extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);
void smp_mpic_message_pass(int target, int msg);
/* Fetch interrupt from a given mpic */
-extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs);
+extern unsigned int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs);
/* This one gets to the primary mpic */
-extern int mpic_get_irq(struct pt_regs *regs);
+extern unsigned int mpic_get_irq(struct pt_regs *regs);
/* Set the EPIC clock ratio */
void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio);
@@ -294,8 +294,5 @@ void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio);
/* Enable/Disable EPIC serial interrupt mode */
void mpic_set_serial_int(struct mpic *mpic, int enable);
-/* global mpic for pSeries */
-extern struct mpic *pSeries_mpic;
-
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_MPIC_H */
diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h
index 010d186d095b..b095a285c84b 100644
--- a/include/asm-powerpc/prom.h
+++ b/include/asm-powerpc/prom.h
@@ -64,11 +64,6 @@ struct boot_param_header
typedef u32 phandle;
typedef u32 ihandle;
-struct interrupt_info {
- int line;
- int sense; /* +ve/-ve logic, edge or level, etc. */
-};
-
struct property {
char *name;
int length;
@@ -81,8 +76,6 @@ struct device_node {
char *type;
phandle node;
phandle linux_phandle;
- int n_intrs;
- struct interrupt_info *intrs;
char *full_name;
struct property *properties;
@@ -167,8 +160,8 @@ extern void unflatten_device_tree(void);
extern void early_init_devtree(void *);
extern int device_is_compatible(struct device_node *device, const char *);
extern int machine_is_compatible(const char *compat);
-extern unsigned char *get_property(struct device_node *node, const char *name,
- int *lenp);
+extern void *get_property(struct device_node *node, const char *name,
+ int *lenp);
extern void print_properties(struct device_node *node);
extern int prom_n_addr_cells(struct device_node* np);
extern int prom_n_size_cells(struct device_node* np);
@@ -204,6 +197,15 @@ extern int release_OF_resource(struct device_node* node, int index);
*/
+/* Helper to read a big number */
+static inline u64 of_read_number(u32 *cell, int size)
+{
+ u64 r = 0;
+ while (size--)
+ r = (r << 32) | *(cell++);
+ return r;
+}
+
/* Translate an OF address block into a CPU physical address
*/
#define OF_BAD_ADDR ((u64)-1)
@@ -240,5 +242,83 @@ extern void kdump_move_device_tree(void);
/* CPU OF node matching */
struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
+
+/*
+ * OF interrupt mapping
+ */
+
+/* This structure is returned when an interrupt is mapped. The controller
+ * field needs to be put() after use
+ */
+
+#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */
+
+struct of_irq {
+ struct device_node *controller; /* Interrupt controller node */
+ u32 size; /* Specifier size */
+ u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
+};
+
+/***
+ * of_irq_map_init - Initialize the irq remapper
+ * @flags: flags defining workarounds to enable
+ *
+ * Some machines have bugs in the device-tree which require certain workarounds
+ * to be applied. Call this before any interrupt mapping attempts to enable
+ * those workarounds.
+ */
+#define OF_IMAP_OLDWORLD_MAC 0x00000001
+#define OF_IMAP_NO_PHANDLE 0x00000002
+
+extern void of_irq_map_init(unsigned int flags);
+
+/***
+ * of_irq_map_raw - Low level interrupt tree parsing
+ * @parent: the device interrupt parent
+ * @intspec: interrupt specifier ("interrupts" property of the device)
+ * @addr: address specifier (start of "reg" property of the device)
+ * @out_irq: structure of_irq filled by this function
+ *
+ * Returns 0 on success and a negative number on error
+ *
+ * This function is a low-level interrupt tree walking function. It
+ * can be used to do a partial walk with synthetized reg and interrupts
+ * properties, for example when resolving PCI interrupts when no device
+ * node exist for the parent.
+ *
+ */
+
+extern int of_irq_map_raw(struct device_node *parent, u32 *intspec, u32 *addr,
+ struct of_irq *out_irq);
+
+
+/***
+ * of_irq_map_one - Resolve an interrupt for a device
+ * @device: the device whose interrupt is to be resolved
+ * @index: index of the interrupt to resolve
+ * @out_irq: structure of_irq filled by this function
+ *
+ * This function resolves an interrupt, walking the tree, for a given
+ * device-tree node. It's the high level pendant to of_irq_map_raw().
+ * It also implements the workarounds for OldWolrd Macs.
+ */
+extern int of_irq_map_one(struct device_node *device, int index,
+ struct of_irq *out_irq);
+
+/***
+ * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * @pdev: the device whose interrupt is to be resolved
+ * @out_irq: structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+struct pci_dev;
+extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
+
+
#endif /* __KERNEL__ */
#endif /* _POWERPC_PROM_H */
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index 9609d3ee8798..c02d105d8294 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -117,6 +117,7 @@ struct spu {
struct list_head sched_list;
int number;
int nid;
+ unsigned int irqs[3];
u32 isrc;
u32 node;
u64 flags;
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 54105bdfe20d..9336f2e89e40 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -261,10 +261,13 @@ handle_level_irq(unsigned int irq, struct irq_desc *desc, struct pt_regs *regs)
* keep it masked and get out of here
*/
action = desc->action;
- if (unlikely(!action || (desc->status & IRQ_DISABLED)))
+ if (unlikely(!action || (desc->status & IRQ_DISABLED))) {
+ desc->status |= IRQ_PENDING;
goto out;
+ }
desc->status |= IRQ_INPROGRESS;
+ desc->status &= ~IRQ_PENDING;
spin_unlock(&desc->lock);
action_ret = handle_IRQ_event(irq, regs, action);
diff --git a/sound/aoa/core/snd-aoa-gpio-feature.c b/sound/aoa/core/snd-aoa-gpio-feature.c
index bab97547a052..7ae0c0bdfad8 100644
--- a/sound/aoa/core/snd-aoa-gpio-feature.c
+++ b/sound/aoa/core/snd-aoa-gpio-feature.c
@@ -112,12 +112,7 @@ static struct device_node *get_gpio(char *name,
static void get_irq(struct device_node * np, int *irqptr)
{
- *irqptr = -1;
- if (!np)
- return;
- if (np->n_intrs != 1)
- return;
- *irqptr = np->intrs[0].line;
+ *irqptr = irq_of_parse_and_map(np, 0);
}
/* 0x4 is outenable, 0x1 is out, thus 4 or 5 */
diff --git a/sound/aoa/soundbus/i2sbus/i2sbus-core.c b/sound/aoa/soundbus/i2sbus/i2sbus-core.c
index f268dacdaa00..01c0724335a3 100644
--- a/sound/aoa/soundbus/i2sbus/i2sbus-core.c
+++ b/sound/aoa/soundbus/i2sbus/i2sbus-core.c
@@ -129,7 +129,7 @@ static int i2sbus_add_dev(struct macio_dev *macio,
if (strncmp(np->name, "i2s-", 4))
return 0;
- if (np->n_intrs != 3)
+ if (macio_irq_count(macio) != 3)
return 0;
dev = kzalloc(sizeof(struct i2sbus_dev), GFP_KERNEL);
@@ -183,9 +183,10 @@ static int i2sbus_add_dev(struct macio_dev *macio,
snprintf(dev->rnames[i], sizeof(dev->rnames[i]), rnames[i], np->name);
}
for (i=0;i<3;i++) {
- if (request_irq(np->intrs[i].line, ints[i], 0, dev->rnames[i], dev))
+ if (request_irq(macio_irq(macio, i), ints[i], 0,
+ dev->rnames[i], dev))
goto err;
- dev->interrupts[i] = np->intrs[i].line;
+ dev->interrupts[i] = macio_irq(macio, i);
}
for (i=0;i<3;i++) {
diff --git a/sound/oss/dmasound/dmasound_awacs.c b/sound/oss/dmasound/dmasound_awacs.c
index de454ca39226..4359903f4376 100644
--- a/sound/oss/dmasound/dmasound_awacs.c
+++ b/sound/oss/dmasound/dmasound_awacs.c
@@ -374,10 +374,7 @@ setup_audio_gpio(const char *name, const char* compatible, int *gpio_addr, int*
*gpio_pol = *pp;
else
*gpio_pol = 1;
- if (np->n_intrs > 0)
- return np->intrs[0].line;
-
- return 0;
+ return irq_of_parse_and_map(np, 0);
}
static inline void
@@ -2864,14 +2861,13 @@ printk("dmasound_pmac: couldn't find a Codec we can handle\n");
* other info if necessary (early AWACS we want to read chip ids)
*/
- if (of_get_address(io, 2, NULL, NULL) == NULL || io->n_intrs < 3) {
+ if (of_get_address(io, 2, NULL, NULL) == NULL) {
/* OK - maybe we need to use the 'awacs' node (on earlier
* machines).
*/
if (awacs_node) {
io = awacs_node ;
- if (of_get_address(io, 2, NULL, NULL) == NULL ||
- io->n_intrs < 3) {
+ if (of_get_address(io, 2, NULL, NULL) == NULL) {
printk("dmasound_pmac: can't use %s\n",
io->full_name);
return -ENODEV;
@@ -2940,9 +2936,9 @@ printk("dmasound_pmac: couldn't find a Codec we can handle\n");
if (awacs_revision == AWACS_SCREAMER && awacs)
awacs_recalibrate();
- awacs_irq = io->intrs[0].line;
- awacs_tx_irq = io->intrs[1].line;
- awacs_rx_irq = io->intrs[2].line;
+ awacs_irq = irq_of_parse_and_map(io, 0);
+ awacs_tx_irq = irq_of_parse_and_map(io, 1);
+ awacs_rx_irq = irq_of_parse_and_map(io, 2);
/* Hack for legacy crap that will be killed someday */
awacs_node = io;
diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index 90db9a1d1e0a..641430631505 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -1120,6 +1120,7 @@ int __init snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
struct snd_pmac *chip;
struct device_node *np;
int i, err;
+ unsigned int irq;
unsigned long ctrl_addr, txdma_addr, rxdma_addr;
static struct snd_device_ops ops = {
.dev_free = snd_pmac_dev_free,
@@ -1153,10 +1154,6 @@ int __init snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
if (chip->is_k2) {
static char *rnames[] = {
"Sound Control", "Sound DMA" };
- if (np->n_intrs < 3) {
- err = -ENODEV;
- goto __error;
- }
for (i = 0; i < 2; i ++) {
if (of_address_to_resource(np->parent, i,
&chip->rsrc[i])) {
@@ -1185,10 +1182,6 @@ int __init snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
} else {
static char *rnames[] = {
"Sound Control", "Sound Tx DMA", "Sound Rx DMA" };
- if (np->n_intrs < 3) {
- err = -ENODEV;
- goto __error;
- }
for (i = 0; i < 3; i ++) {
if (of_address_to_resource(np, i,
&chip->rsrc[i])) {
@@ -1220,28 +1213,30 @@ int __init snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
chip->playback.dma = ioremap(txdma_addr, 0x100);
chip->capture.dma = ioremap(rxdma_addr, 0x100);
if (chip->model <= PMAC_BURGUNDY) {
- if (request_irq(np->intrs[0].line, snd_pmac_ctrl_intr, 0,
+ irq = irq_of_parse_and_map(np, 0);
+ if (request_irq(irq, snd_pmac_ctrl_intr, 0,
"PMac", (void*)chip)) {
- snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n", np->intrs[0].line);
+ snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n",
+ irq);
err = -EBUSY;
goto __error;
}
- chip->irq = np->intrs[0].line;
+ chip->irq = irq;
}
- if (request_irq(np->intrs[1].line, snd_pmac_tx_intr, 0,
- "PMac Output", (void*)chip)) {
- snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n", np->intrs[1].line);
+ irq = irq_of_parse_and_map(np, 1);
+ if (request_irq(irq, snd_pmac_tx_intr, 0, "PMac Output", (void*)chip)){
+ snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n", irq);
err = -EBUSY;
goto __error;
}
- chip->tx_irq = np->intrs[1].line;
- if (request_irq(np->intrs[2].line, snd_pmac_rx_intr, 0,
- "PMac Input", (void*)chip)) {
- snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n", np->intrs[2].line);
+ chip->tx_irq = irq;
+ irq = irq_of_parse_and_map(np, 2);
+ if (request_irq(irq, snd_pmac_rx_intr, 0, "PMac Input", (void*)chip)) {
+ snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n", irq);
err = -EBUSY;
goto __error;
}
- chip->rx_irq = np->intrs[2].line;
+ chip->rx_irq = irq;
snd_pmac_sound_feature(chip, 1);
diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c
index 70e4ebc70260..692c61177678 100644
--- a/sound/ppc/tumbler.c
+++ b/sound/ppc/tumbler.c
@@ -1121,7 +1121,7 @@ static long tumbler_find_device(const char *device, const char *platform,
DBG("(I) GPIO device %s found, offset: %x, active state: %d !\n",
device, gp->addr, gp->active_state);
- return (node->n_intrs > 0) ? node->intrs[0].line : 0;
+ return irq_of_parse_and_map(node, 0);
}
/* reset audio */
@@ -1264,16 +1264,16 @@ static int __init tumbler_init(struct snd_pmac *chip)
&mix->line_mute, 1);
irq = tumbler_find_device("headphone-detect",
NULL, &mix->hp_detect, 0);
- if (irq < 0)
+ if (irq <= NO_IRQ)
irq = tumbler_find_device("headphone-detect",
NULL, &mix->hp_detect, 1);
- if (irq < 0)
+ if (irq <= NO_IRQ)
irq = tumbler_find_device("keywest-gpio15",
NULL, &mix->hp_detect, 1);
mix->headphone_irq = irq;
irq = tumbler_find_device("line-output-detect",
NULL, &mix->line_detect, 0);
- if (irq < 0)
+ if (irq <= NO_IRQ)
irq = tumbler_find_device("line-output-detect",
NULL, &mix->line_detect, 1);
mix->lineout_irq = irq;