diff options
-rw-r--r-- | arch/powerpc/platforms/powermac/cpufreq_64.c | 496 |
1 files changed, 449 insertions, 47 deletions
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c index 39150342c6f1..a4b50c4109c2 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -28,6 +28,7 @@ #include <asm/cputable.h> #include <asm/time.h> #include <asm/smu.h> +#include <asm/pmac_pfunc.h> #undef DEBUG @@ -85,6 +86,10 @@ static u32 *g5_pmode_data; static int g5_pmode_max; static int g5_pmode_cur; +static void (*g5_switch_volt)(int speed_mode); +static int (*g5_switch_freq)(int speed_mode); +static int (*g5_query_freq)(void); + static DECLARE_MUTEX(g5_switch_mutex); @@ -92,9 +97,11 @@ static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ static int g5_fvt_count; /* number of op. points */ static int g5_fvt_cur; /* current op. point */ -/* ----------------- real hardware interface */ +/* + * SMU based voltage switching for Neo2 platforms + */ -static void g5_switch_volt(int speed_mode) +static void g5_smu_switch_volt(int speed_mode) { struct smu_simple_cmd cmd; @@ -105,26 +112,57 @@ static void g5_switch_volt(int speed_mode) wait_for_completion(&comp); } -static int g5_switch_freq(int speed_mode) +/* + * Platform function based voltage/vdnap switching for Neo2 + */ + +static struct pmf_function *pfunc_set_vdnap0; +static struct pmf_function *pfunc_vdnap0_complete; + +static void g5_vdnap_switch_volt(int speed_mode) { - struct cpufreq_freqs freqs; - int to; + struct pmf_args args; + u32 slew, done = 0; + unsigned long timeout; - if (g5_pmode_cur == speed_mode) - return 0; + slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0; + args.count = 1; + args.u[0].p = &slew; - down(&g5_switch_mutex); + pmf_call_one(pfunc_set_vdnap0, &args); - freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; - freqs.new = g5_cpu_freqs[speed_mode].frequency; - freqs.cpu = 0; + /* It's an irq GPIO so we should be able to just block here, + * I'll do that later after I've properly tested the IRQ code for + * platform functions + */ + timeout = jiffies + HZ/10; + while(!time_after(jiffies, timeout)) { + args.count = 1; + args.u[0].p = &done; + pmf_call_one(pfunc_vdnap0_complete, &args); + if (done) + break; + msleep(1); + } + if (done == 0) + printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); +} - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + +/* + * SCOM based frequency switching for 970FX rev3 + */ +static int g5_scom_switch_freq(int speed_mode) +{ + unsigned long flags; + int to; /* If frequency is going up, first ramp up the voltage */ if (speed_mode < g5_pmode_cur) g5_switch_volt(speed_mode); + local_irq_save(flags); + /* Clear PCR high */ scom970_write(SCOM_PCR, 0); /* Clear PCR low */ @@ -147,6 +185,8 @@ static int g5_switch_freq(int speed_mode) udelay(100); } + local_irq_restore(flags); + /* If frequency is going down, last ramp the voltage */ if (speed_mode > g5_pmode_cur) g5_switch_volt(speed_mode); @@ -154,14 +194,10 @@ static int g5_switch_freq(int speed_mode) g5_pmode_cur = speed_mode; ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - up(&g5_switch_mutex); - return 0; } -static int g5_query_freq(void) +static int g5_scom_query_freq(void) { unsigned long psr = scom970_read(SCOM_PSR); int i; @@ -173,7 +209,104 @@ static int g5_query_freq(void) return i; } -/* ----------------- cpufreq bookkeeping */ +/* + * Platform function based voltage switching for PowerMac7,2 & 7,3 + */ + +static struct pmf_function *pfunc_cpu0_volt_high; +static struct pmf_function *pfunc_cpu0_volt_low; +static struct pmf_function *pfunc_cpu1_volt_high; +static struct pmf_function *pfunc_cpu1_volt_low; + +static void g5_pfunc_switch_volt(int speed_mode) +{ + if (speed_mode == CPUFREQ_HIGH) { + if (pfunc_cpu0_volt_high) + pmf_call_one(pfunc_cpu0_volt_high, NULL); + if (pfunc_cpu1_volt_high) + pmf_call_one(pfunc_cpu1_volt_high, NULL); + } else { + if (pfunc_cpu0_volt_low) + pmf_call_one(pfunc_cpu0_volt_low, NULL); + if (pfunc_cpu1_volt_low) + pmf_call_one(pfunc_cpu1_volt_low, NULL); + } + msleep(10); /* should be faster , to fix */ +} + +/* + * Platform function based frequency switching for PowerMac7,2 & 7,3 + */ + +static struct pmf_function *pfunc_cpu_setfreq_high; +static struct pmf_function *pfunc_cpu_setfreq_low; +static struct pmf_function *pfunc_cpu_getfreq; +static struct pmf_function *pfunc_slewing_done;; + +static int g5_pfunc_switch_freq(int speed_mode) +{ + struct pmf_args args; + u32 done = 0; + unsigned long timeout; + + /* If frequency is going up, first ramp up the voltage */ + if (speed_mode < g5_pmode_cur) + g5_switch_volt(speed_mode); + + /* Do it */ + if (speed_mode == CPUFREQ_HIGH) + pmf_call_one(pfunc_cpu_setfreq_high, NULL); + else + pmf_call_one(pfunc_cpu_setfreq_low, NULL); + + /* It's an irq GPIO so we should be able to just block here, + * I'll do that later after I've properly tested the IRQ code for + * platform functions + */ + timeout = jiffies + HZ/10; + while(!time_after(jiffies, timeout)) { + args.count = 1; + args.u[0].p = &done; + pmf_call_one(pfunc_slewing_done, &args); + if (done) + break; + msleep(1); + } + if (done == 0) + printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); + + /* If frequency is going down, last ramp the voltage */ + if (speed_mode > g5_pmode_cur) + g5_switch_volt(speed_mode); + + g5_pmode_cur = speed_mode; + ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; + + return 0; +} + +static int g5_pfunc_query_freq(void) +{ + struct pmf_args args; + u32 val = 0; + + args.count = 1; + args.u[0].p = &val; + pmf_call_one(pfunc_cpu_getfreq, &args); + return val ? CPUFREQ_HIGH : CPUFREQ_LOW; +} + +/* + * Fake voltage switching for platforms with missing support + */ + +static void g5_dummy_switch_volt(int speed_mode) +{ +} + +/* + * Common interface to the cpufreq core + */ static int g5_cpufreq_verify(struct cpufreq_policy *policy) { @@ -183,13 +316,30 @@ static int g5_cpufreq_verify(struct cpufreq_policy *policy) static int g5_cpufreq_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { - unsigned int newstate = 0; + unsigned int newstate = 0; + struct cpufreq_freqs freqs; + int rc; if (cpufreq_frequency_table_target(policy, g5_cpu_freqs, target_freq, relation, &newstate)) return -EINVAL; - return g5_switch_freq(newstate); + if (g5_pmode_cur == newstate) + return 0; + + down(&g5_switch_mutex); + + freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; + freqs.new = g5_cpu_freqs[newstate].frequency; + freqs.cpu = 0; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + rc = g5_switch_freq(newstate); + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + up(&g5_switch_mutex); + + return rc; } static unsigned int g5_cpufreq_get_speed(unsigned int cpu) @@ -205,6 +355,7 @@ static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) policy->governor = CPUFREQ_DEFAULT_GOVERNOR; policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; policy->cur = g5_cpu_freqs[g5_query_freq()].frequency; + policy->cpus = cpu_possible_map; cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu); return cpufreq_frequency_table_cpuinfo(policy, @@ -224,19 +375,39 @@ static struct cpufreq_driver g5_cpufreq_driver = { }; -static int __init g5_cpufreq_init(void) +static int __init g5_neo2_cpufreq_init(struct device_node *cpus) { struct device_node *cpunode; unsigned int psize, ssize; - struct smu_sdbp_header *shdr; unsigned long max_freq; - u32 *valp; + char *freq_method, *volt_method; + u32 *valp, pvr_hi; + int use_volts_vdnap = 0; + int use_volts_smu = 0; int rc = -ENODEV; - /* Look for CPU and SMU nodes */ - cpunode = of_find_node_by_type(NULL, "cpu"); - if (!cpunode) { - DBG("No CPU node !\n"); + /* Check supported platforms */ + if (machine_is_compatible("PowerMac8,1") || + machine_is_compatible("PowerMac8,2") || + machine_is_compatible("PowerMac9,1")) + use_volts_smu = 1; + else if (machine_is_compatible("PowerMac11,2")) + use_volts_vdnap = 1; + else + return -ENODEV; + + /* Get first CPU node */ + for (cpunode = NULL; + (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { + u32 *reg = + (u32 *)get_property(cpunode, "reg", NULL); + if (reg == NULL || (*reg) != 0) + continue; + if (!strcmp(cpunode->type, "cpu")) + break; + } + if (cpunode == NULL) { + printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n"); return -ENODEV; } @@ -246,8 +417,9 @@ static int __init g5_cpufreq_init(void) DBG("No cpu-version property !\n"); goto bail_noprops; } - if (((*valp) >> 16) != 0x3c) { - DBG("Wrong CPU version: %08x\n", *valp); + pvr_hi = (*valp) >> 16; + if (pvr_hi != 0x3c && pvr_hi != 0x44) { + printk(KERN_ERR "cpufreq: Unsupported CPU version\n"); goto bail_noprops; } @@ -259,18 +431,50 @@ static int __init g5_cpufreq_init(void) } g5_pmode_max = psize / sizeof(u32) - 1; - /* Look for the FVT table */ - shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); - if (!shdr) - goto bail_noprops; - g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; - ssize = (shdr->len * sizeof(u32)) - sizeof(struct smu_sdbp_header); - g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt); - g5_fvt_cur = 0; - - /* Sanity checking */ - if (g5_fvt_count < 1 || g5_pmode_max < 1) - goto bail_noprops; + if (use_volts_smu) { + struct smu_sdbp_header *shdr; + + /* Look for the FVT table */ + shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); + if (!shdr) + goto bail_noprops; + g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; + ssize = (shdr->len * sizeof(u32)) - + sizeof(struct smu_sdbp_header); + g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt); + g5_fvt_cur = 0; + + /* Sanity checking */ + if (g5_fvt_count < 1 || g5_pmode_max < 1) + goto bail_noprops; + + g5_switch_volt = g5_smu_switch_volt; + volt_method = "SMU"; + } else if (use_volts_vdnap) { + struct device_node *root; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_ERR "cpufreq: Can't find root of " + "device tree\n"); + goto bail_noprops; + } + pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0"); + pfunc_vdnap0_complete = + pmf_find_function(root, "slewing-done"); + if (pfunc_set_vdnap0 == NULL || + pfunc_vdnap0_complete == NULL) { + printk(KERN_ERR "cpufreq: Can't find required " + "platform function\n"); + goto bail_noprops; + } + + g5_switch_volt = g5_vdnap_switch_volt; + volt_method = "GPIO"; + } else { + g5_switch_volt = g5_dummy_switch_volt; + volt_method = "none"; + } /* * From what I see, clock-frequency is always the maximal frequency. @@ -286,19 +490,23 @@ static int __init g5_cpufreq_init(void) g5_cpu_freqs[0].frequency = max_freq; g5_cpu_freqs[1].frequency = max_freq/2; - /* Check current frequency */ - g5_pmode_cur = g5_query_freq(); - if (g5_pmode_cur > 1) - /* We don't support anything but 1:1 and 1:2, fixup ... */ - g5_pmode_cur = 1; + /* Set callbacks */ + g5_switch_freq = g5_scom_switch_freq; + g5_query_freq = g5_scom_query_freq; + freq_method = "SCOM"; /* Force apply current frequency to make sure everything is in * sync (voltage is right for example). Firmware may leave us with * a strange setting ... */ - g5_switch_freq(g5_pmode_cur); + g5_switch_volt(CPUFREQ_HIGH); + msleep(10); + g5_pmode_cur = -1; + g5_switch_freq(g5_query_freq()); printk(KERN_INFO "Registering G5 CPU frequency driver\n"); + printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n", + freq_method, volt_method); printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", g5_cpu_freqs[1].frequency/1000, g5_cpu_freqs[0].frequency/1000, @@ -317,6 +525,200 @@ static int __init g5_cpufreq_init(void) return rc; } +static int __init g5_pm72_cpufreq_init(struct device_node *cpus) +{ + struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL; + u8 *eeprom = NULL; + u32 *valp; + u64 max_freq, min_freq, ih, il; + int has_volt = 1, rc = 0; + + /* Get first CPU node */ + for (cpunode = NULL; + (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { + if (!strcmp(cpunode->type, "cpu")) + break; + } + if (cpunode == NULL) { + printk(KERN_ERR "cpufreq: Can't find any CPU node\n"); + return -ENODEV; + } + + /* Lookup the cpuid eeprom node */ + cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0"); + if (cpuid != NULL) + eeprom = (u8 *)get_property(cpuid, "cpuid", NULL); + if (eeprom == NULL) { + printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n"); + rc = -ENODEV; + goto bail; + } + + /* Lookup the i2c hwclock */ + for (hwclock = NULL; + (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){ + char *loc = get_property(hwclock, "hwctrl-location", NULL); + if (loc == NULL) + continue; + if (strcmp(loc, "CPU CLOCK")) + continue; + if (!get_property(hwclock, "platform-get-frequency", NULL)) + continue; + break; + } + if (hwclock == NULL) { + printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n"); + rc = -ENODEV; + goto bail; + } + + DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name); + + /* Now get all the platform functions */ + pfunc_cpu_getfreq = + pmf_find_function(hwclock, "get-frequency"); + pfunc_cpu_setfreq_high = + pmf_find_function(hwclock, "set-frequency-high"); + pfunc_cpu_setfreq_low = + pmf_find_function(hwclock, "set-frequency-low"); + pfunc_slewing_done = + pmf_find_function(hwclock, "slewing-done"); + pfunc_cpu0_volt_high = + pmf_find_function(hwclock, "set-voltage-high-0"); + pfunc_cpu0_volt_low = + pmf_find_function(hwclock, "set-voltage-low-0"); + pfunc_cpu1_volt_high = + pmf_find_function(hwclock, "set-voltage-high-1"); + pfunc_cpu1_volt_low = + pmf_find_function(hwclock, "set-voltage-low-1"); + + /* Check we have minimum requirements */ + if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL || + pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) { + printk(KERN_ERR "cpufreq: Can't find platform functions !\n"); + rc = -ENODEV; + goto bail; + } + + /* Check that we have complete sets */ + if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) { + pmf_put_function(pfunc_cpu0_volt_high); + pmf_put_function(pfunc_cpu0_volt_low); + pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL; + has_volt = 0; + } + if (!has_volt || + pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) { + pmf_put_function(pfunc_cpu1_volt_high); + pmf_put_function(pfunc_cpu1_volt_low); + pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL; + } + + /* Note: The device tree also contains a "platform-set-values" + * function for which I haven't quite figured out the usage. It + * might have to be called on init and/or wakeup, I'm not too sure + * but things seem to work fine without it so far ... + */ + + /* Get max frequency from device-tree */ + valp = (u32 *)get_property(cpunode, "clock-frequency", NULL); + if (!valp) { + printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n"); + rc = -ENODEV; + goto bail; + } + + max_freq = (*valp)/1000; + + /* Now calculate reduced frequency by using the cpuid input freq + * ratio. This requires 64 bits math unless we are willing to lose + * some precision + */ + ih = *((u32 *)(eeprom + 0x10)); + il = *((u32 *)(eeprom + 0x20)); + min_freq = 0; + if (ih != 0 && il != 0) + min_freq = (max_freq * il) / ih; + + /* Sanity check */ + if (min_freq >= max_freq || min_freq < 1000) { + printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n"); + rc = -ENODEV; + goto bail; + } + g5_cpu_freqs[0].frequency = max_freq; + g5_cpu_freqs[1].frequency = min_freq; + + /* Set callbacks */ + g5_switch_volt = g5_pfunc_switch_volt; + g5_switch_freq = g5_pfunc_switch_freq; + g5_query_freq = g5_pfunc_query_freq; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + g5_switch_volt(CPUFREQ_HIGH); + msleep(10); + g5_pmode_cur = -1; + g5_switch_freq(g5_query_freq()); + + printk(KERN_INFO "Registering G5 CPU frequency driver\n"); + printk(KERN_INFO "Frequency method: i2c/pfunc, " + "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + g5_cpu_freqs[1].frequency/1000, + g5_cpu_freqs[0].frequency/1000, + g5_cpu_freqs[g5_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&g5_cpufreq_driver); + bail: + if (rc != 0) { + pmf_put_function(pfunc_cpu_getfreq); + pmf_put_function(pfunc_cpu_setfreq_high); + pmf_put_function(pfunc_cpu_setfreq_low); + pmf_put_function(pfunc_slewing_done); + pmf_put_function(pfunc_cpu0_volt_high); + pmf_put_function(pfunc_cpu0_volt_low); + pmf_put_function(pfunc_cpu1_volt_high); + pmf_put_function(pfunc_cpu1_volt_low); + } + of_node_put(hwclock); + of_node_put(cpuid); + of_node_put(cpunode); + + return rc; +} + +static int __init g5_rm31_cpufreq_init(struct device_node *cpus) +{ + /* NYI */ + return 0; +} + +static int __init g5_cpufreq_init(void) +{ + struct device_node *cpus; + int rc; + + cpus = of_find_node_by_path("/cpus"); + if (cpus == NULL) { + DBG("No /cpus node !\n"); + return -ENODEV; + } + + if (machine_is_compatible("PowerMac7,2") || + machine_is_compatible("PowerMac7,3")) + rc = g5_pm72_cpufreq_init(cpus); + else if (machine_is_compatible("RackMac3,1")) + rc = g5_rm31_cpufreq_init(cpus); + else + rc = g5_neo2_cpufreq_init(cpus); + + of_node_put(cpus); + return rc; +} + module_init(g5_cpufreq_init); |