diff options
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 92 |
1 files changed, 51 insertions, 41 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index ae571a199f2f..1ec635f54994 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -129,8 +129,8 @@ struct bnx2x_mac_vals { u32 xmac_val; u32 emac_addr; u32 emac_val; - u32 umac_addr; - u32 umac_val; + u32 umac_addr[2]; + u32 umac_val[2]; u32 bmac_addr; u32 bmac_val[2]; }; @@ -7866,6 +7866,20 @@ int bnx2x_init_hw_func_cnic(struct bnx2x *bp) return 0; } +/* previous driver DMAE transaction may have occurred when pre-boot stage ended + * and boot began, or when kdump kernel was loaded. Either case would invalidate + * the addresses of the transaction, resulting in was-error bit set in the pci + * causing all hw-to-host pcie transactions to timeout. If this happened we want + * to clear the interrupt which detected this from the pglueb and the was done + * bit + */ +static void bnx2x_clean_pglue_errors(struct bnx2x *bp) +{ + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, + 1 << BP_ABS_FUNC(bp)); +} + static int bnx2x_init_hw_func(struct bnx2x *bp) { int port = BP_PORT(bp); @@ -7958,8 +7972,7 @@ static int bnx2x_init_hw_func(struct bnx2x *bp) bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase); - if (!CHIP_IS_E1x(bp)) - REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, func); + bnx2x_clean_pglue_errors(bp); bnx2x_init_block(bp, BLOCK_ATC, init_phase); bnx2x_init_block(bp, BLOCK_DMAE, init_phase); @@ -10141,6 +10154,25 @@ static u32 bnx2x_get_pretend_reg(struct bnx2x *bp) return base + (BP_ABS_FUNC(bp)) * stride; } +static bool bnx2x_prev_unload_close_umac(struct bnx2x *bp, + u8 port, u32 reset_reg, + struct bnx2x_mac_vals *vals) +{ + u32 mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port; + u32 base_addr; + + if (!(mask & reset_reg)) + return false; + + BNX2X_DEV_INFO("Disable umac Rx %02x\n", port); + base_addr = port ? GRCBASE_UMAC1 : GRCBASE_UMAC0; + vals->umac_addr[port] = base_addr + UMAC_REG_COMMAND_CONFIG; + vals->umac_val[port] = REG_RD(bp, vals->umac_addr[port]); + REG_WR(bp, vals->umac_addr[port], 0); + + return true; +} + static void bnx2x_prev_unload_close_mac(struct bnx2x *bp, struct bnx2x_mac_vals *vals) { @@ -10149,10 +10181,7 @@ static void bnx2x_prev_unload_close_mac(struct bnx2x *bp, u8 port = BP_PORT(bp); /* reset addresses as they also mark which values were changed */ - vals->bmac_addr = 0; - vals->umac_addr = 0; - vals->xmac_addr = 0; - vals->emac_addr = 0; + memset(vals, 0, sizeof(*vals)); reset_reg = REG_RD(bp, MISC_REG_RESET_REG_2); @@ -10201,15 +10230,11 @@ static void bnx2x_prev_unload_close_mac(struct bnx2x *bp, REG_WR(bp, vals->xmac_addr, 0); mac_stopped = true; } - mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port; - if (mask & reset_reg) { - BNX2X_DEV_INFO("Disable umac Rx\n"); - base_addr = BP_PORT(bp) ? GRCBASE_UMAC1 : GRCBASE_UMAC0; - vals->umac_addr = base_addr + UMAC_REG_COMMAND_CONFIG; - vals->umac_val = REG_RD(bp, vals->umac_addr); - REG_WR(bp, vals->umac_addr, 0); - mac_stopped = true; - } + + mac_stopped |= bnx2x_prev_unload_close_umac(bp, 0, + reset_reg, vals); + mac_stopped |= bnx2x_prev_unload_close_umac(bp, 1, + reset_reg, vals); } if (mac_stopped) @@ -10505,8 +10530,11 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) /* Close the MAC Rx to prevent BRB from filling up */ bnx2x_prev_unload_close_mac(bp, &mac_vals); - /* close LLH filters towards the BRB */ + /* close LLH filters for both ports towards the BRB */ bnx2x_set_rx_filter(&bp->link_params, 0); + bp->link_params.port ^= 1; + bnx2x_set_rx_filter(&bp->link_params, 0); + bp->link_params.port ^= 1; /* Check if the UNDI driver was previously loaded */ if (bnx2x_prev_is_after_undi(bp)) { @@ -10553,8 +10581,10 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) if (mac_vals.xmac_addr) REG_WR(bp, mac_vals.xmac_addr, mac_vals.xmac_val); - if (mac_vals.umac_addr) - REG_WR(bp, mac_vals.umac_addr, mac_vals.umac_val); + if (mac_vals.umac_addr[0]) + REG_WR(bp, mac_vals.umac_addr[0], mac_vals.umac_val[0]); + if (mac_vals.umac_addr[1]) + REG_WR(bp, mac_vals.umac_addr[1], mac_vals.umac_val[1]); if (mac_vals.emac_addr) REG_WR(bp, mac_vals.emac_addr, mac_vals.emac_val); if (mac_vals.bmac_addr) { @@ -10571,26 +10601,6 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) return bnx2x_prev_mcp_done(bp); } -/* previous driver DMAE transaction may have occurred when pre-boot stage ended - * and boot began, or when kdump kernel was loaded. Either case would invalidate - * the addresses of the transaction, resulting in was-error bit set in the pci - * causing all hw-to-host pcie transactions to timeout. If this happened we want - * to clear the interrupt which detected this from the pglueb and the was done - * bit - */ -static void bnx2x_prev_interrupted_dmae(struct bnx2x *bp) -{ - if (!CHIP_IS_E1x(bp)) { - u32 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS); - if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) { - DP(BNX2X_MSG_SP, - "'was error' bit was found to be set in pglueb upon startup. Clearing\n"); - REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, - 1 << BP_FUNC(bp)); - } - } -} - static int bnx2x_prev_unload(struct bnx2x *bp) { int time_counter = 10; @@ -10600,7 +10610,7 @@ static int bnx2x_prev_unload(struct bnx2x *bp) /* clear hw from errors which may have resulted from an interrupted * dmae transaction. */ - bnx2x_prev_interrupted_dmae(bp); + bnx2x_clean_pglue_errors(bp); /* Release previously held locks */ hw_lock_reg = (BP_FUNC(bp) <= 5) ? |