summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt4
-rw-r--r--arch/arm/mach-at91/Kconfig23
-rw-r--r--drivers/clocksource/Kconfig14
-rw-r--r--drivers/clocksource/Makefile2
-rw-r--r--drivers/clocksource/timer-atmel-tcb.c (renamed from drivers/clocksource/tcb_clksrc.c)126
-rw-r--r--drivers/clocksource/timer-milbeaut.c66
-rw-r--r--drivers/clocksource/timer-sun4i.c5
-rw-r--r--drivers/clocksource/timer-tegra20.c63
-rw-r--r--drivers/misc/Kconfig24
-rw-r--r--drivers/misc/atmel_tclib.c5
-rw-r--r--drivers/pwm/pwm-atmel-tcb.c2
-rw-r--r--include/soc/at91/atmel_tcb.h (renamed from include/linux/atmel_tc.h)4
12 files changed, 202 insertions, 136 deletions
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
index 5c2e23574ca0..3da9d515c03a 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
@@ -2,7 +2,9 @@ Allwinner A1X SoCs Timer Controller
Required properties:
-- compatible : should be "allwinner,sun4i-a10-timer"
+- compatible : should be one of the following:
+ "allwinner,sun4i-a10-timer"
+ "allwinner,suniv-f1c100s-timer"
- reg : Specifies base physical address and size of the registers.
- interrupts : The interrupt of the first timer
- clocks: phandle to the source clock (usually a 24 MHz fixed clock)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 01b1bdb4fb6e..a2220e522f62 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -104,6 +104,29 @@ config SOC_AT91SAM9
AT91SAM9X35
AT91SAM9XE
+comment "Clocksource driver selection"
+
+config ATMEL_CLOCKSOURCE_PIT
+ bool "Periodic Interval Timer (PIT) support"
+ depends on SOC_AT91SAM9 || SOC_SAMA5
+ default SOC_AT91SAM9 || SOC_SAMA5
+ select ATMEL_PIT
+ help
+ Select this to get a clocksource based on the Atmel Periodic Interval
+ Timer. It has a relatively low resolution and the TC Block clocksource
+ should be preferred.
+
+config ATMEL_CLOCKSOURCE_TCB
+ bool "Timer Counter Blocks (TCB) support"
+ default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAMA5
+ select ATMEL_TCB_CLKSRC
+ help
+ Select this to get a high precision clocksource based on a
+ TC block with a 5+ MHz base clock rate.
+ On platforms with 16-bit counters, two timer channels are combined
+ to make a single 32-bit timer.
+ It can also be used as a clock event device supporting oneshot mode.
+
config HAVE_AT91_UTMI
bool
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 48321488f0fd..6bcaa4e2e72c 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -387,7 +387,7 @@ config ARM_GLOBAL_TIMER
This options enables support for the ARM global timer unit
config ARM_TIMER_SP804
- bool "Support for Dual Timer SP804 module"
+ bool "Support for Dual Timer SP804 module" if COMPILE_TEST
depends on GENERIC_SCHED_CLOCK && CLKDEV_LOOKUP
select CLKSRC_MMIO
select TIMER_OF if OF
@@ -407,8 +407,11 @@ config ARMV7M_SYSTICK
This options enables support for the ARMv7M system timer unit
config ATMEL_PIT
+ bool "Atmel PIT support" if COMPILE_TEST
+ depends on HAS_IOMEM
select TIMER_OF if OF
- def_bool SOC_AT91SAM9 || SOC_SAMA5
+ help
+ Support for the Periodic Interval Timer found on Atmel SoCs.
config ATMEL_ST
bool "Atmel ST timer support" if COMPILE_TEST
@@ -418,6 +421,13 @@ config ATMEL_ST
help
Support for the Atmel ST timer.
+config ATMEL_TCB_CLKSRC
+ bool "Atmel TC Block timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ select TIMER_OF if OF
+ help
+ Support for Timer Counter Blocks on Atmel SoCs.
+
config CLKSRC_EXYNOS_MCT
bool "Exynos multi core timer driver" if COMPILE_TEST
depends on ARM || ARM64
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index dba4eff880de..236858fa7fbf 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -3,7 +3,7 @@ obj-$(CONFIG_TIMER_OF) += timer-of.o
obj-$(CONFIG_TIMER_PROBE) += timer-probe.o
obj-$(CONFIG_ATMEL_PIT) += timer-atmel-pit.o
obj-$(CONFIG_ATMEL_ST) += timer-atmel-st.o
-obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o
+obj-$(CONFIG_ATMEL_TCB_CLKSRC) += timer-atmel-tcb.o
obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o
obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += timer-cs5535.o
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/timer-atmel-tcb.c
index f987027ca566..6ed31f9def7e 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/timer-atmel-tcb.c
@@ -9,9 +9,11 @@
#include <linux/err.h>
#include <linux/ioport.h>
#include <linux/io.h>
-#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
#include <linux/syscore_ops.h>
-#include <linux/atmel_tc.h>
+#include <soc/at91/atmel_tcb.h>
/*
@@ -28,13 +30,6 @@
* source, used in either periodic or oneshot mode. This runs
* at 32 KiHZ, and can handle delays of up to two seconds.
*
- * A boot clocksource and clockevent source are also currently needed,
- * unless the relevant platforms (ARM/AT91, AVR32/AT32) are changed so
- * this code can be used when init_timers() is called, well before most
- * devices are set up. (Some low end AT91 parts, which can run uClinux,
- * have only the timers in one TC block... they currently don't support
- * the tclib code, because of that initialization issue.)
- *
* REVISIT behavior during system suspend states... we should disable
* all clocks and save the power. Easily done for clockevent devices,
* but clocksources won't necessarily get the needed notifications.
@@ -112,7 +107,6 @@ static void tc_clksrc_resume(struct clocksource *cs)
}
static struct clocksource clksrc = {
- .name = "tcb_clksrc",
.rating = 200,
.read = tc_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
@@ -121,6 +115,16 @@ static struct clocksource clksrc = {
.resume = tc_clksrc_resume,
};
+static u64 notrace tc_sched_clock_read(void)
+{
+ return tc_get_cycles(&clksrc);
+}
+
+static u64 notrace tc_sched_clock_read32(void)
+{
+ return tc_get_cycles32(&clksrc);
+}
+
#ifdef CONFIG_GENERIC_CLOCKEVENTS
struct tc_clkevt_device {
@@ -214,7 +218,6 @@ static int tc_next_event(unsigned long delta, struct clock_event_device *d)
static struct tc_clkevt_device clkevt = {
.clkevt = {
- .name = "tc_clkevt",
.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT,
/* Should be lower than at91rm9200's system timer */
@@ -330,39 +333,74 @@ static void __init tcb_setup_single_chan(struct atmel_tc *tc, int mck_divisor_id
writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
}
-static int __init tcb_clksrc_init(void)
-{
- static char bootinfo[] __initdata
- = KERN_DEBUG "%s: tc%d at %d.%03d MHz\n";
+static const u8 atmel_tcb_divisors[5] = { 2, 8, 32, 128, 0, };
+
+static const struct of_device_id atmel_tcb_of_match[] = {
+ { .compatible = "atmel,at91rm9200-tcb", .data = (void *)16, },
+ { .compatible = "atmel,at91sam9x5-tcb", .data = (void *)32, },
+ { /* sentinel */ }
+};
- struct platform_device *pdev;
- struct atmel_tc *tc;
+static int __init tcb_clksrc_init(struct device_node *node)
+{
+ struct atmel_tc tc;
struct clk *t0_clk;
+ const struct of_device_id *match;
+ u64 (*tc_sched_clock)(void);
u32 rate, divided_rate = 0;
int best_divisor_idx = -1;
int clk32k_divisor_idx = -1;
+ int bits;
int i;
int ret;
- tc = atmel_tc_alloc(CONFIG_ATMEL_TCB_CLKSRC_BLOCK);
- if (!tc) {
- pr_debug("can't alloc TC for clocksource\n");
- return -ENODEV;
+ /* Protect against multiple calls */
+ if (tcaddr)
+ return 0;
+
+ tc.regs = of_iomap(node->parent, 0);
+ if (!tc.regs)
+ return -ENXIO;
+
+ t0_clk = of_clk_get_by_name(node->parent, "t0_clk");
+ if (IS_ERR(t0_clk))
+ return PTR_ERR(t0_clk);
+
+ tc.slow_clk = of_clk_get_by_name(node->parent, "slow_clk");
+ if (IS_ERR(tc.slow_clk))
+ return PTR_ERR(tc.slow_clk);
+
+ tc.clk[0] = t0_clk;
+ tc.clk[1] = of_clk_get_by_name(node->parent, "t1_clk");
+ if (IS_ERR(tc.clk[1]))
+ tc.clk[1] = t0_clk;
+ tc.clk[2] = of_clk_get_by_name(node->parent, "t2_clk");
+ if (IS_ERR(tc.clk[2]))
+ tc.clk[2] = t0_clk;
+
+ tc.irq[2] = of_irq_get(node->parent, 2);
+ if (tc.irq[2] <= 0) {
+ tc.irq[2] = of_irq_get(node->parent, 0);
+ if (tc.irq[2] <= 0)
+ return -EINVAL;
}
- tcaddr = tc->regs;
- pdev = tc->pdev;
- t0_clk = tc->clk[0];
+ match = of_match_node(atmel_tcb_of_match, node->parent);
+ bits = (uintptr_t)match->data;
+
+ for (i = 0; i < ARRAY_SIZE(tc.irq); i++)
+ writel(ATMEL_TC_ALL_IRQ, tc.regs + ATMEL_TC_REG(i, IDR));
+
ret = clk_prepare_enable(t0_clk);
if (ret) {
pr_debug("can't enable T0 clk\n");
- goto err_free_tc;
+ return ret;
}
/* How fast will we be counting? Pick something over 5 MHz. */
rate = (u32) clk_get_rate(t0_clk);
- for (i = 0; i < 5; i++) {
- unsigned divisor = atmel_tc_divisors[i];
+ for (i = 0; i < ARRAY_SIZE(atmel_tcb_divisors); i++) {
+ unsigned divisor = atmel_tcb_divisors[i];
unsigned tmp;
/* remember 32 KiHz clock for later */
@@ -381,27 +419,31 @@ static int __init tcb_clksrc_init(void)
best_divisor_idx = i;
}
-
- printk(bootinfo, clksrc.name, CONFIG_ATMEL_TCB_CLKSRC_BLOCK,
- divided_rate / 1000000,
+ clksrc.name = kbasename(node->parent->full_name);
+ clkevt.clkevt.name = kbasename(node->parent->full_name);
+ pr_debug("%s at %d.%03d MHz\n", clksrc.name, divided_rate / 1000000,
((divided_rate % 1000000) + 500) / 1000);
- if (tc->tcb_config && tc->tcb_config->counter_width == 32) {
+ tcaddr = tc.regs;
+
+ if (bits == 32) {
/* use apropriate function to read 32 bit counter */
clksrc.read = tc_get_cycles32;
/* setup ony channel 0 */
- tcb_setup_single_chan(tc, best_divisor_idx);
+ tcb_setup_single_chan(&tc, best_divisor_idx);
+ tc_sched_clock = tc_sched_clock_read32;
} else {
- /* tclib will give us three clocks no matter what the
+ /* we have three clocks no matter what the
* underlying platform supports.
*/
- ret = clk_prepare_enable(tc->clk[1]);
+ ret = clk_prepare_enable(tc.clk[1]);
if (ret) {
pr_debug("can't enable T1 clk\n");
goto err_disable_t0;
}
/* setup both channel 0 & 1 */
- tcb_setup_dual_chan(tc, best_divisor_idx);
+ tcb_setup_dual_chan(&tc, best_divisor_idx);
+ tc_sched_clock = tc_sched_clock_read;
}
/* and away we go! */
@@ -410,24 +452,26 @@ static int __init tcb_clksrc_init(void)
goto err_disable_t1;
/* channel 2: periodic and oneshot timer support */
- ret = setup_clkevents(tc, clk32k_divisor_idx);
+ ret = setup_clkevents(&tc, clk32k_divisor_idx);
if (ret)
goto err_unregister_clksrc;
+ sched_clock_register(tc_sched_clock, 32, divided_rate);
+
return 0;
err_unregister_clksrc:
clocksource_unregister(&clksrc);
err_disable_t1:
- if (!tc->tcb_config || tc->tcb_config->counter_width != 32)
- clk_disable_unprepare(tc->clk[1]);
+ if (bits != 32)
+ clk_disable_unprepare(tc.clk[1]);
err_disable_t0:
clk_disable_unprepare(t0_clk);
-err_free_tc:
- atmel_tc_free(tc);
+ tcaddr = NULL;
+
return ret;
}
-arch_initcall(tcb_clksrc_init);
+TIMER_OF_DECLARE(atmel_tcb_clksrc, "atmel,tcb-timer", tcb_clksrc_init);
diff --git a/drivers/clocksource/timer-milbeaut.c b/drivers/clocksource/timer-milbeaut.c
index f2019a88e3ee..fa9fb4eacade 100644
--- a/drivers/clocksource/timer-milbeaut.c
+++ b/drivers/clocksource/timer-milbeaut.c
@@ -26,8 +26,8 @@
#define MLB_TMR_TMCSR_CSL_DIV2 0
#define MLB_TMR_DIV_CNT 2
-#define MLB_TMR_SRC_CH (1)
-#define MLB_TMR_EVT_CH (0)
+#define MLB_TMR_SRC_CH 1
+#define MLB_TMR_EVT_CH 0
#define MLB_TMR_SRC_CH_OFS (MLB_TMR_REGSZPCH * MLB_TMR_SRC_CH)
#define MLB_TMR_EVT_CH_OFS (MLB_TMR_REGSZPCH * MLB_TMR_EVT_CH)
@@ -43,6 +43,8 @@
#define MLB_TMR_EVT_TMRLR2_OFS (MLB_TMR_EVT_CH_OFS + MLB_TMR_TMRLR2_OFS)
#define MLB_TIMER_RATING 500
+#define MLB_TIMER_ONESHOT 0
+#define MLB_TIMER_PERIODIC 1
static irqreturn_t mlb_timer_interrupt(int irq, void *dev_id)
{
@@ -59,27 +61,53 @@ static irqreturn_t mlb_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int mlb_set_state_periodic(struct clock_event_device *clk)
+static void mlb_evt_timer_start(struct timer_of *to, bool periodic)
{
- struct timer_of *to = to_timer_of(clk);
u32 val = MLB_TMR_TMCSR_CSL_DIV2;
+ val |= MLB_TMR_TMCSR_CNTE | MLB_TMR_TMCSR_TRG | MLB_TMR_TMCSR_INTE;
+ if (periodic)
+ val |= MLB_TMR_TMCSR_RELD;
writel_relaxed(val, timer_of_base(to) + MLB_TMR_EVT_TMCSR_OFS);
+}
- writel_relaxed(to->of_clk.period, timer_of_base(to) +
- MLB_TMR_EVT_TMRLR1_OFS);
- val |= MLB_TMR_TMCSR_RELD | MLB_TMR_TMCSR_CNTE |
- MLB_TMR_TMCSR_TRG | MLB_TMR_TMCSR_INTE;
+static void mlb_evt_timer_stop(struct timer_of *to)
+{
+ u32 val = readl_relaxed(timer_of_base(to) + MLB_TMR_EVT_TMCSR_OFS);
+
+ val &= ~MLB_TMR_TMCSR_CNTE;
writel_relaxed(val, timer_of_base(to) + MLB_TMR_EVT_TMCSR_OFS);
+}
+
+static void mlb_evt_timer_register_count(struct timer_of *to, unsigned long cnt)
+{
+ writel_relaxed(cnt, timer_of_base(to) + MLB_TMR_EVT_TMRLR1_OFS);
+}
+
+static int mlb_set_state_periodic(struct clock_event_device *clk)
+{
+ struct timer_of *to = to_timer_of(clk);
+
+ mlb_evt_timer_stop(to);
+ mlb_evt_timer_register_count(to, to->of_clk.period);
+ mlb_evt_timer_start(to, MLB_TIMER_PERIODIC);
return 0;
}
static int mlb_set_state_oneshot(struct clock_event_device *clk)
{
struct timer_of *to = to_timer_of(clk);
- u32 val = MLB_TMR_TMCSR_CSL_DIV2;
- writel_relaxed(val, timer_of_base(to) + MLB_TMR_EVT_TMCSR_OFS);
+ mlb_evt_timer_stop(to);
+ mlb_evt_timer_start(to, MLB_TIMER_ONESHOT);
+ return 0;
+}
+
+static int mlb_set_state_shutdown(struct clock_event_device *clk)
+{
+ struct timer_of *to = to_timer_of(clk);
+
+ mlb_evt_timer_stop(to);
return 0;
}
@@ -88,22 +116,21 @@ static int mlb_clkevt_next_event(unsigned long event,
{
struct timer_of *to = to_timer_of(clk);
- writel_relaxed(event, timer_of_base(to) + MLB_TMR_EVT_TMRLR1_OFS);
- writel_relaxed(MLB_TMR_TMCSR_CSL_DIV2 |
- MLB_TMR_TMCSR_CNTE | MLB_TMR_TMCSR_INTE |
- MLB_TMR_TMCSR_TRG, timer_of_base(to) +
- MLB_TMR_EVT_TMCSR_OFS);
+ mlb_evt_timer_stop(to);
+ mlb_evt_timer_register_count(to, event);
+ mlb_evt_timer_start(to, MLB_TIMER_ONESHOT);
return 0;
}
static int mlb_config_clock_source(struct timer_of *to)
{
- writel_relaxed(0, timer_of_base(to) + MLB_TMR_SRC_TMCSR_OFS);
- writel_relaxed(~0, timer_of_base(to) + MLB_TMR_SRC_TMR_OFS);
+ u32 val = MLB_TMR_TMCSR_CSL_DIV2;
+
+ writel_relaxed(val, timer_of_base(to) + MLB_TMR_SRC_TMCSR_OFS);
writel_relaxed(~0, timer_of_base(to) + MLB_TMR_SRC_TMRLR1_OFS);
writel_relaxed(~0, timer_of_base(to) + MLB_TMR_SRC_TMRLR2_OFS);
- writel_relaxed(BIT(4) | BIT(1) | BIT(0), timer_of_base(to) +
- MLB_TMR_SRC_TMCSR_OFS);
+ val |= MLB_TMR_TMCSR_RELD | MLB_TMR_TMCSR_CNTE | MLB_TMR_TMCSR_TRG;
+ writel_relaxed(val, timer_of_base(to) + MLB_TMR_SRC_TMCSR_OFS);
return 0;
}
@@ -123,6 +150,7 @@ static struct timer_of to = {
.features = CLOCK_EVT_FEAT_DYNIRQ | CLOCK_EVT_FEAT_ONESHOT,
.set_state_oneshot = mlb_set_state_oneshot,
.set_state_periodic = mlb_set_state_periodic,
+ .set_state_shutdown = mlb_set_state_shutdown,
.set_next_event = mlb_clkevt_next_event,
},
diff --git a/drivers/clocksource/timer-sun4i.c b/drivers/clocksource/timer-sun4i.c
index 6e0180aaf784..65f38f6ca714 100644
--- a/drivers/clocksource/timer-sun4i.c
+++ b/drivers/clocksource/timer-sun4i.c
@@ -186,7 +186,8 @@ static int __init sun4i_timer_init(struct device_node *node)
*/
if (of_machine_is_compatible("allwinner,sun4i-a10") ||
of_machine_is_compatible("allwinner,sun5i-a13") ||
- of_machine_is_compatible("allwinner,sun5i-a10s"))
+ of_machine_is_compatible("allwinner,sun5i-a10s") ||
+ of_machine_is_compatible("allwinner,suniv-f1c100s"))
sched_clock_register(sun4i_timer_sched_read, 32,
timer_of_rate(&to));
@@ -218,3 +219,5 @@ static int __init sun4i_timer_init(struct device_node *node)
}
TIMER_OF_DECLARE(sun4i, "allwinner,sun4i-a10-timer",
sun4i_timer_init);
+TIMER_OF_DECLARE(suniv, "allwinner,suniv-f1c100s-timer",
+ sun4i_timer_init);
diff --git a/drivers/clocksource/timer-tegra20.c b/drivers/clocksource/timer-tegra20.c
index fdb3d795a409..919b3568c495 100644
--- a/drivers/clocksource/timer-tegra20.c
+++ b/drivers/clocksource/timer-tegra20.c
@@ -60,9 +60,6 @@
static u32 usec_config;
static void __iomem *timer_reg_base;
#ifdef CONFIG_ARM
-static void __iomem *rtc_base;
-static struct timespec64 persistent_ts;
-static u64 persistent_ms, last_persistent_ms;
static struct delay_timer tegra_delay_timer;
#endif
@@ -199,40 +196,30 @@ static unsigned long tegra_delay_timer_read_counter_long(void)
return readl(timer_reg_base + TIMERUS_CNTR_1US);
}
+static struct timer_of suspend_rtc_to = {
+ .flags = TIMER_OF_BASE | TIMER_OF_CLOCK,
+};
+
/*
* tegra_rtc_read - Reads the Tegra RTC registers
* Care must be taken that this funciton is not called while the
* tegra_rtc driver could be executing to avoid race conditions
* on the RTC shadow register
*/
-static u64 tegra_rtc_read_ms(void)
+static u64 tegra_rtc_read_ms(struct clocksource *cs)
{
- u32 ms = readl(rtc_base + RTC_MILLISECONDS);
- u32 s = readl(rtc_base + RTC_SHADOW_SECONDS);
+ u32 ms = readl(timer_of_base(&suspend_rtc_to) + RTC_MILLISECONDS);
+ u32 s = readl(timer_of_base(&suspend_rtc_to) + RTC_SHADOW_SECONDS);
return (u64)s * MSEC_PER_SEC + ms;
}
-/*
- * tegra_read_persistent_clock64 - Return time from a persistent clock.
- *
- * Reads the time from a source which isn't disabled during PM, the
- * 32k sync timer. Convert the cycles elapsed since last read into
- * nsecs and adds to a monotonically increasing timespec64.
- * Care must be taken that this funciton is not called while the
- * tegra_rtc driver could be executing to avoid race conditions
- * on the RTC shadow register
- */
-static void tegra_read_persistent_clock64(struct timespec64 *ts)
-{
- u64 delta;
-
- last_persistent_ms = persistent_ms;
- persistent_ms = tegra_rtc_read_ms();
- delta = persistent_ms - last_persistent_ms;
-
- timespec64_add_ns(&persistent_ts, delta * NSEC_PER_MSEC);
- *ts = persistent_ts;
-}
+static struct clocksource suspend_rtc_clocksource = {
+ .name = "tegra_suspend_timer",
+ .rating = 200,
+ .read = tegra_rtc_read_ms,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP,
+};
#endif
static int tegra_timer_common_init(struct device_node *np, struct timer_of *to)
@@ -385,25 +372,15 @@ out:
static int __init tegra20_init_rtc(struct device_node *np)
{
- struct clk *clk;
+ int ret;
- rtc_base = of_iomap(np, 0);
- if (!rtc_base) {
- pr_err("Can't map RTC registers\n");
- return -ENXIO;
- }
+ ret = timer_of_init(np, &suspend_rtc_to);
+ if (ret)
+ return ret;
- /*
- * rtc registers are used by read_persistent_clock, keep the rtc clock
- * enabled
- */
- clk = of_clk_get(np, 0);
- if (IS_ERR(clk))
- pr_warn("Unable to get rtc-tegra clock\n");
- else
- clk_prepare_enable(clk);
+ clocksource_register_hz(&suspend_rtc_clocksource, 1000);
- return register_persistent_clock(tegra_read_persistent_clock64);
+ return 0;
}
TIMER_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
#endif
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index b80cb6af0cb4..6a0365b2332c 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -59,30 +59,6 @@ config ATMEL_TCLIB
blocks found on many Atmel processors. This facilitates using
these blocks by different drivers despite processor differences.
-config ATMEL_TCB_CLKSRC
- bool "TC Block Clocksource"
- depends on ATMEL_TCLIB
- default y
- help
- Select this to get a high precision clocksource based on a
- TC block with a 5+ MHz base clock rate. Two timer channels
- are combined to make a single 32-bit timer.
-
- When GENERIC_CLOCKEVENTS is defined, the third timer channel
- may be used as a clock event device supporting oneshot mode
- (delays of up to two seconds) based on the 32 KiHz clock.
-
-config ATMEL_TCB_CLKSRC_BLOCK
- int
- depends on ATMEL_TCB_CLKSRC
- default 0
- range 0 1
- help
- Some chips provide more than one TC block, so you have the
- choice of which one to use for the clock framework. The other
- TC can be used for other purposes, such as PWM generation and
- interval timing.
-
config DUMMY_IRQ
tristate "Dummy IRQ handler"
default n
diff --git a/drivers/misc/atmel_tclib.c b/drivers/misc/atmel_tclib.c
index ac24a4bd63f7..2c6850ef0e9c 100644
--- a/drivers/misc/atmel_tclib.c
+++ b/drivers/misc/atmel_tclib.c
@@ -1,4 +1,3 @@
-#include <linux/atmel_tc.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/init.h>
@@ -10,6 +9,7 @@
#include <linux/slab.h>
#include <linux/export.h>
#include <linux/of.h>
+#include <soc/at91/atmel_tcb.h>
/*
* This is a thin library to solve the problem of how to portably allocate
@@ -111,6 +111,9 @@ static int __init tc_probe(struct platform_device *pdev)
struct resource *r;
unsigned int i;
+ if (of_get_child_count(pdev->dev.of_node))
+ return -EBUSY;
+
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return -EINVAL;
diff --git a/drivers/pwm/pwm-atmel-tcb.c b/drivers/pwm/pwm-atmel-tcb.c
index 0d0f8376bc35..7da1fdb4d269 100644
--- a/drivers/pwm/pwm-atmel-tcb.c
+++ b/drivers/pwm/pwm-atmel-tcb.c
@@ -17,10 +17,10 @@
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/platform_device.h>
-#include <linux/atmel_tc.h>
#include <linux/pwm.h>
#include <linux/of_device.h>
#include <linux/slab.h>
+#include <soc/at91/atmel_tcb.h>
#define NPWM 6
diff --git a/include/linux/atmel_tc.h b/include/soc/at91/atmel_tcb.h
index 468fdfa643f0..c3c7200ce151 100644
--- a/include/linux/atmel_tc.h
+++ b/include/soc/at91/atmel_tcb.h
@@ -7,8 +7,8 @@
* (at your option) any later version.
*/
-#ifndef ATMEL_TC_H
-#define ATMEL_TC_H
+#ifndef __SOC_ATMEL_TCB_H
+#define __SOC_ATMEL_TCB_H
#include <linux/compiler.h>
#include <linux/list.h>