summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/sprd.txt11
-rw-r--r--Documentation/devicetree/bindings/serial/digicolor-usart.txt27
-rw-r--r--Documentation/devicetree/bindings/serial/sirf-uart.txt4
-rw-r--r--Documentation/devicetree/bindings/serial/sprd-uart.txt7
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt2
-rw-r--r--Documentation/kernel-parameters.txt12
-rw-r--r--arch/arm/boot/dts/exynos4210-origen.dts1
-rw-r--r--arch/arm/boot/dts/exynos4210-smdkv310.dts1
-rw-r--r--arch/arm/boot/dts/exynos4210-trats.dts1
-rw-r--r--arch/arm/boot/dts/exynos4210-universal_c210.dts1
-rw-r--r--arch/arm/boot/dts/exynos4412-odroid-common.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos4412-origen.dts1
-rw-r--r--arch/arm/boot/dts/exynos4412-smdk4412.dts1
-rw-r--r--arch/arm/boot/dts/exynos4412-tiny4412.dts4
-rw-r--r--arch/arm/boot/dts/exynos4412-trats2.dts1
-rw-r--r--arch/x86/include/asm/intel-mid.h3
-rw-r--r--arch/x86/kernel/early_printk.c187
-rw-r--r--arch/x86/platform/intel-mid/device_libs/Makefile2
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_max3111.c35
-rw-r--r--arch/x86/platform/intel-mid/early_printk_intel_mid.c220
-rw-r--r--drivers/bluetooth/hci_ath.c15
-rw-r--r--drivers/pnp/driver.c2
-rw-r--r--drivers/tty/amiserial.c2
-rw-r--r--drivers/tty/ehv_bytechan.c1
-rw-r--r--drivers/tty/isicom.c2
-rw-r--r--drivers/tty/n_tty.c254
-rw-r--r--drivers/tty/pty.c31
-rw-r--r--drivers/tty/rocket.c4
-rw-r--r--drivers/tty/serial/8250/8250_core.c230
-rw-r--r--drivers/tty/serial/8250/8250_dma.c6
-rw-r--r--drivers/tty/serial/8250/8250_dw.c11
-rw-r--r--drivers/tty/serial/8250/8250_early.c13
-rw-r--r--drivers/tty/serial/8250/8250_omap.c88
-rw-r--r--drivers/tty/serial/8250/8250_pci.c4
-rw-r--r--drivers/tty/serial/8250/8250_pnp.c8
-rw-r--r--drivers/tty/serial/8250/Kconfig19
-rw-r--r--drivers/tty/serial/Kconfig54
-rw-r--r--drivers/tty/serial/Makefile4
-rw-r--r--drivers/tty/serial/altera_jtaguart.c1
-rw-r--r--drivers/tty/serial/altera_uart.c1
-rw-r--r--drivers/tty/serial/atmel_serial.c153
-rw-r--r--drivers/tty/serial/digicolor-usart.c560
-rw-r--r--drivers/tty/serial/etraxfs-uart.c996
-rw-r--r--drivers/tty/serial/fsl_lpuart.c135
-rw-r--r--drivers/tty/serial/imx.c190
-rw-r--r--drivers/tty/serial/mcf.c7
-rw-r--r--drivers/tty/serial/men_z135_uart.c155
-rw-r--r--drivers/tty/serial/mrst_max3110.c909
-rw-r--r--drivers/tty/serial/mrst_max3110.h61
-rw-r--r--drivers/tty/serial/msm_serial.c27
-rw-r--r--drivers/tty/serial/mxs-auart.c55
-rw-r--r--drivers/tty/serial/of_serial.c13
-rw-r--r--drivers/tty/serial/omap-serial.c37
-rw-r--r--drivers/tty/serial/samsung.c680
-rw-r--r--drivers/tty/serial/samsung.h42
-rw-r--r--drivers/tty/serial/serial_core.c111
-rw-r--r--drivers/tty/serial/sh-sci.c25
-rw-r--r--drivers/tty/serial/sirfsoc_uart.c40
-rw-r--r--drivers/tty/serial/sirfsoc_uart.h4
-rw-r--r--drivers/tty/serial/sprd_serial.c793
-rw-r--r--drivers/tty/serial/xilinx_uartps.c10
-rw-r--r--drivers/tty/tty_buffer.c6
-rw-r--r--drivers/tty/tty_ioctl.c3
-rw-r--r--drivers/tty/tty_mutex.c18
-rw-r--r--drivers/tty/vt/vt.c18
-rw-r--r--include/linux/pnp.h12
-rw-r--r--include/linux/serial_8250.h4
-rw-r--r--include/linux/serial_core.h22
-rw-r--r--include/linux/serial_s3c.h28
-rw-r--r--include/linux/tty.h25
-rw-r--r--include/linux/vt_buffer.h4
-rw-r--r--include/uapi/linux/serial_core.h12
-rw-r--r--include/uapi/linux/serial_reg.h3
73 files changed, 4523 insertions, 1910 deletions
diff --git a/Documentation/devicetree/bindings/arm/sprd.txt b/Documentation/devicetree/bindings/arm/sprd.txt
new file mode 100644
index 000000000000..31a629dc75b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sprd.txt
@@ -0,0 +1,11 @@
+Spreadtrum SoC Platforms Device Tree Bindings
+----------------------------------------------------
+
+Sharkl64 is a Spreadtrum's SoC Platform which is based
+on ARM 64-bit processor.
+
+SC9836 openphone board with SC9836 SoC based on the
+Sharkl64 Platform shall have the following properties.
+
+Required root node properties:
+ - compatible = "sprd,sc9836-openphone", "sprd,sc9836";
diff --git a/Documentation/devicetree/bindings/serial/digicolor-usart.txt b/Documentation/devicetree/bindings/serial/digicolor-usart.txt
new file mode 100644
index 000000000000..2d3ede66889d
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/digicolor-usart.txt
@@ -0,0 +1,27 @@
+Binding for Conexant Digicolor USART
+
+Note: this binding is only applicable for using the USART peripheral as
+UART. USART also support synchronous serial protocols like SPI and I2S. Use
+the binding that matches the wiring of your system.
+
+Required properties:
+- compatible : should be "cnxt,cx92755-usart".
+- reg: Should contain USART controller registers location and length.
+- interrupts: Should contain a single USART controller interrupt.
+- clocks: Must contain phandles to the USART clock
+ See ../clocks/clock-bindings.txt for details.
+
+Note: Each UART port should have an alias correctly numbered
+in "aliases" node.
+
+Example:
+ aliases {
+ serial0 = &uart0;
+ };
+
+ uart0: uart@f0000740 {
+ compatible = "cnxt,cx92755-usart";
+ reg = <0xf0000740 0x20>;
+ clocks = <&main_clk>;
+ interrupts = <44>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/sirf-uart.txt b/Documentation/devicetree/bindings/serial/sirf-uart.txt
index 3acdd969edf1..f0c39261c5d4 100644
--- a/Documentation/devicetree/bindings/serial/sirf-uart.txt
+++ b/Documentation/devicetree/bindings/serial/sirf-uart.txt
@@ -2,7 +2,7 @@
Required properties:
- compatible : Should be "sirf,prima2-uart", "sirf, prima2-usp-uart",
- "sirf,marco-uart" or "sirf,marco-bt-uart" which means
+ "sirf,atlas7-uart" or "sirf,atlas7-bt-uart" which means
uart located in BT module and used for BT.
- reg : Offset and length of the register set for the device
- interrupts : Should contain uart interrupt
@@ -37,7 +37,7 @@ usp@b0090000 {
for uart use in BT module,
uart6: uart@11000000 {
cell-index = <6>;
- compatible = "sirf,marco-bt-uart", "sirf,marco-uart";
+ compatible = "sirf,atlas7-bt-uart", "sirf,atlas7-uart";
reg = <0x11000000 0x1000>;
interrupts = <0 100 0>;
clocks = <&clks 138>, <&clks 140>, <&clks 141>;
diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt
new file mode 100644
index 000000000000..2aff0f22c9fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.txt
@@ -0,0 +1,7 @@
+* Spreadtrum serial UART
+
+Required properties:
+- compatible: must be "sprd,sc9836-uart"
+- reg: offset and length of the register set for the device
+- interrupts: exactly one interrupt specifier
+- clocks: phandles to input clocks.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 1eb6444a48c4..cba613f8aa4f 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -37,6 +37,7 @@ chrp Common Hardware Reference Platform
chunghwa Chunghwa Picture Tubes Ltd.
cirrus Cirrus Logic, Inc.
cnm Chips&Media, Inc.
+cnxt Conexant Systems, Inc.
cortina Cortina Systems, Inc.
cosmic Cosmic Circuits
crystalfontz Crystalfontz America, Inc.
@@ -162,6 +163,7 @@ snps Synopsys, Inc.
solidrun SolidRun
sony Sony Corporation
spansion Spansion Inc.
+sprd Spreadtrum Communications Inc.
st STMicroelectronics
ste ST-Ericsson
stericsson ST-Ericsson
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a89e32637570..bfcb1a62a7b4 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -970,6 +970,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
smh Use ARM semihosting calls for early console.
+ s3c2410,<addr>
+ s3c2412,<addr>
+ s3c2440,<addr>
+ s3c6400,<addr>
+ s5pv210,<addr>
+ exynos4210,<addr>
+ Use early console provided by serial driver available
+ on Samsung SoCs, requires selecting proper type and
+ a correct base address of the selected UART port. The
+ serial port must already be setup and configured.
+ Options are not yet supported.
+
earlyprintk= [X86,SH,BLACKFIN,ARM,M68k]
earlyprintk=vga
earlyprintk=efi
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index f767c425d0b5..b81146141402 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -31,6 +31,7 @@
chosen {
bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
+ stdout-path = &serial_2;
};
regulators {
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 676e6e0c8cf3..86216fff1b4f 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -27,6 +27,7 @@
chosen {
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
+ stdout-path = &serial_1;
};
sdhci@12530000 {
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 720836205546..a406df3d6df8 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -28,6 +28,7 @@
chosen {
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+ stdout-path = &serial_2;
};
regulators {
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index aaf0cae4f5e8..6effb13f98a6 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -26,6 +26,7 @@
chosen {
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
+ stdout-path = &serial_2;
};
sysram@02020000 {
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index abd63366298a..2c43d1859308 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -12,6 +12,10 @@
#include "exynos4412.dtsi"
/ {
+ chosen {
+ stdout-path = &serial_1;
+ };
+
firmware@0204F000 {
compatible = "samsung,secure-firmware";
reg = <0x0204F000 0x1000>;
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index de15114fd07c..bd8b73077d41 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -26,6 +26,7 @@
chosen {
bootargs ="console=ttySAC2,115200";
+ stdout-path = &serial_2;
};
firmware@0203F000 {
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index ded0b70f7644..b9256afbcc68 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -25,6 +25,7 @@
chosen {
bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
+ stdout-path = &serial_1;
};
g2d@10800000 {
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
index ea6929d9c621..d46fd4c2aeaa 100644
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -18,6 +18,10 @@
model = "FriendlyARM TINY4412 board based on Exynos4412";
compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4";
+ chosen {
+ stdout-path = &serial_0;
+ };
+
memory {
reg = <0x40000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 29231b452643..5fbb01335a0f 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -32,6 +32,7 @@
chosen {
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+ stdout-path = &serial_2;
};
firmware@0204F000 {
diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index e34e097b6f9d..705d35708a50 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -136,9 +136,6 @@ extern enum intel_mid_timer_options intel_mid_timer_options;
#define SFI_MTMR_MAX_NUM 8
#define SFI_MRTC_MAX 8
-extern struct console early_mrst_console;
-extern void mrst_early_console_init(void);
-
extern struct console early_hsu_console;
extern void hsu_early_console_init(const char *);
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 01d1c187c9f9..a62536a1be88 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -19,6 +19,7 @@
#include <linux/usb/ehci_def.h>
#include <linux/efi.h>
#include <asm/efi.h>
+#include <asm/pci_x86.h>
/* Simple VGA output */
#define VGABASE (__ISA_IO_base + 0xb8000)
@@ -76,7 +77,7 @@ static struct console early_vga_console = {
/* Serial functions loosely based on a similar package from Klaus P. Gerlicher */
-static int early_serial_base = 0x3f8; /* ttyS0 */
+static unsigned long early_serial_base = 0x3f8; /* ttyS0 */
#define XMTRDY 0x20
@@ -94,13 +95,40 @@ static int early_serial_base = 0x3f8; /* ttyS0 */
#define DLL 0 /* Divisor Latch Low */
#define DLH 1 /* Divisor latch High */
+static void mem32_serial_out(unsigned long addr, int offset, int value)
+{
+ uint32_t *vaddr = (uint32_t *)addr;
+ /* shift implied by pointer type */
+ writel(value, vaddr + offset);
+}
+
+static unsigned int mem32_serial_in(unsigned long addr, int offset)
+{
+ uint32_t *vaddr = (uint32_t *)addr;
+ /* shift implied by pointer type */
+ return readl(vaddr + offset);
+}
+
+static unsigned int io_serial_in(unsigned long addr, int offset)
+{
+ return inb(addr + offset);
+}
+
+static void io_serial_out(unsigned long addr, int offset, int value)
+{
+ outb(value, addr + offset);
+}
+
+static unsigned int (*serial_in)(unsigned long addr, int offset) = io_serial_in;
+static void (*serial_out)(unsigned long addr, int offset, int value) = io_serial_out;
+
static int early_serial_putc(unsigned char ch)
{
unsigned timeout = 0xffff;
- while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
+ while ((serial_in(early_serial_base, LSR) & XMTRDY) == 0 && --timeout)
cpu_relax();
- outb(ch, early_serial_base + TXR);
+ serial_out(early_serial_base, TXR, ch);
return timeout ? 0 : -1;
}
@@ -114,13 +142,28 @@ static void early_serial_write(struct console *con, const char *s, unsigned n)
}
}
+static __init void early_serial_hw_init(unsigned divisor)
+{
+ unsigned char c;
+
+ serial_out(early_serial_base, LCR, 0x3); /* 8n1 */
+ serial_out(early_serial_base, IER, 0); /* no interrupt */
+ serial_out(early_serial_base, FCR, 0); /* no fifo */
+ serial_out(early_serial_base, MCR, 0x3); /* DTR + RTS */
+
+ c = serial_in(early_serial_base, LCR);
+ serial_out(early_serial_base, LCR, c | DLAB);
+ serial_out(early_serial_base, DLL, divisor & 0xff);
+ serial_out(early_serial_base, DLH, (divisor >> 8) & 0xff);
+ serial_out(early_serial_base, LCR, c & ~DLAB);
+}
+
#define DEFAULT_BAUD 9600
static __init void early_serial_init(char *s)
{
- unsigned char c;
unsigned divisor;
- unsigned baud = DEFAULT_BAUD;
+ unsigned long baud = DEFAULT_BAUD;
char *e;
if (*s == ',')
@@ -145,24 +188,124 @@ static __init void early_serial_init(char *s)
s++;
}
- outb(0x3, early_serial_base + LCR); /* 8n1 */
- outb(0, early_serial_base + IER); /* no interrupt */
- outb(0, early_serial_base + FCR); /* no fifo */
- outb(0x3, early_serial_base + MCR); /* DTR + RTS */
+ if (*s) {
+ if (kstrtoul(s, 0, &baud) < 0 || baud == 0)
+ baud = DEFAULT_BAUD;
+ }
+
+ /* Convert from baud to divisor value */
+ divisor = 115200 / baud;
+
+ /* These will always be IO based ports */
+ serial_in = io_serial_in;
+ serial_out = io_serial_out;
+
+ /* Set up the HW */
+ early_serial_hw_init(divisor);
+}
+
+#ifdef CONFIG_PCI
+/*
+ * early_pci_serial_init()
+ *
+ * This function is invoked when the early_printk param starts with "pciserial"
+ * The rest of the param should be ",B:D.F,baud" where B, D & F describe the
+ * location of a PCI device that must be a UART device.
+ */
+static __init void early_pci_serial_init(char *s)
+{
+ unsigned divisor;
+ unsigned long baud = DEFAULT_BAUD;
+ u8 bus, slot, func;
+ uint32_t classcode, bar0;
+ uint16_t cmdreg;
+ char *e;
+
+
+ /*
+ * First, part the param to get the BDF values
+ */
+ if (*s == ',')
+ ++s;
+
+ if (*s == 0)
+ return;
+
+ bus = (u8)simple_strtoul(s, &e, 16);
+ s = e;
+ if (*s != ':')
+ return;
+ ++s;
+ slot = (u8)simple_strtoul(s, &e, 16);
+ s = e;
+ if (*s != '.')
+ return;
+ ++s;
+ func = (u8)simple_strtoul(s, &e, 16);
+ s = e;
+
+ /* A baud might be following */
+ if (*s == ',')
+ s++;
+
+ /*
+ * Second, find the device from the BDF
+ */
+ cmdreg = read_pci_config(bus, slot, func, PCI_COMMAND);
+ classcode = read_pci_config(bus, slot, func, PCI_CLASS_REVISION);
+ bar0 = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0);
+
+ /*
+ * Verify it is a UART type device
+ */
+ if (((classcode >> 16 != PCI_CLASS_COMMUNICATION_MODEM) &&
+ (classcode >> 16 != PCI_CLASS_COMMUNICATION_SERIAL)) ||
+ (((classcode >> 8) & 0xff) != 0x02)) /* 16550 I/F at BAR0 */
+ return;
+
+ /*
+ * Determine if it is IO or memory mapped
+ */
+ if (bar0 & 0x01) {
+ /* it is IO mapped */
+ serial_in = io_serial_in;
+ serial_out = io_serial_out;
+ early_serial_base = bar0&0xfffffffc;
+ write_pci_config(bus, slot, func, PCI_COMMAND,
+ cmdreg|PCI_COMMAND_IO);
+ } else {
+ /* It is memory mapped - assume 32-bit alignment */
+ serial_in = mem32_serial_in;
+ serial_out = mem32_serial_out;
+ /* WARNING! assuming the address is always in the first 4G */
+ early_serial_base =
+ (unsigned long)early_ioremap(bar0 & 0xfffffff0, 0x10);
+ write_pci_config(bus, slot, func, PCI_COMMAND,
+ cmdreg|PCI_COMMAND_MEMORY);
+ }
+ /*
+ * Lastly, initalize the hardware
+ */
if (*s) {
- baud = simple_strtoul(s, &e, 0);
- if (baud == 0 || s == e)
+ if (strcmp(s, "nocfg") == 0)
+ /* Sometimes, we want to leave the UART alone
+ * and assume the BIOS has set it up correctly.
+ * "nocfg" tells us this is the case, and we
+ * should do no more setup.
+ */
+ return;
+ if (kstrtoul(s, 0, &baud) < 0 || baud == 0)
baud = DEFAULT_BAUD;
}
+ /* Convert from baud to divisor value */
divisor = 115200 / baud;
- c = inb(early_serial_base + LCR);
- outb(c | DLAB, early_serial_base + LCR);
- outb(divisor & 0xff, early_serial_base + DLL);
- outb((divisor >> 8) & 0xff, early_serial_base + DLH);
- outb(c & ~DLAB, early_serial_base + LCR);
+
+ /* Set up the HW */
+ early_serial_hw_init(divisor);
}
+#endif
static struct console early_serial_console = {
.name = "earlyser",
@@ -210,6 +353,13 @@ static int __init setup_early_printk(char *buf)
early_serial_init(buf + 4);
early_console_register(&early_serial_console, keep);
}
+#ifdef CONFIG_PCI
+ if (!strncmp(buf, "pciserial", 9)) {
+ early_pci_serial_init(buf + 9);
+ early_console_register(&early_serial_console, keep);
+ buf += 9; /* Keep from match the above "serial" */
+ }
+#endif
if (!strncmp(buf, "vga", 3) &&
boot_params.screen_info.orig_video_isVGA == 1) {
max_xpos = boot_params.screen_info.orig_video_cols;
@@ -226,11 +376,6 @@ static int __init setup_early_printk(char *buf)
early_console_register(&xenboot_console, keep);
#endif
#ifdef CONFIG_EARLY_PRINTK_INTEL_MID
- if (!strncmp(buf, "mrst", 4)) {
- mrst_early_console_init();
- early_console_register(&early_mrst_console, keep);
- }
-
if (!strncmp(buf, "hsu", 3)) {
hsu_early_console_init(buf + 3);
early_console_register(&early_hsu_console, keep);
diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile
index af9307f2cc28..91ec9f8704bf 100644
--- a/arch/x86/platform/intel-mid/device_libs/Makefile
+++ b/arch/x86/platform/intel-mid/device_libs/Makefile
@@ -16,8 +16,6 @@ obj-$(subst m,y,$(CONFIG_INPUT_MPU3050)) += platform_mpu3050.o
obj-$(subst m,y,$(CONFIG_INPUT_BMA150)) += platform_bma023.o
obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
obj-$(subst m,y,$(CONFIG_DRM_MEDFIELD)) += platform_tc35876x.o
-# SPI Devices
-obj-$(subst m,y,$(CONFIG_SERIAL_MRST_MAX3110)) += platform_max3111.o
# MISC Devices
obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
obj-$(subst m,y,$(CONFIG_INTEL_MID_WATCHDOG)) += platform_wdt.o
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_max3111.c b/arch/x86/platform/intel-mid/device_libs/platform_max3111.c
deleted file mode 100644
index afd1df94e0e5..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_max3111.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * platform_max3111.c: max3111 platform data initilization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <asm/intel-mid.h>
-
-static void __init *max3111_platform_data(void *info)
-{
- struct spi_board_info *spi_info = info;
- int intr = get_gpio_by_name("max3111_int");
-
- spi_info->mode = SPI_MODE_0;
- if (intr == -1)
- return NULL;
- spi_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- return NULL;
-}
-
-static const struct devs_id max3111_dev_id __initconst = {
- .name = "spi_max3111",
- .type = SFI_DEV_TYPE_SPI,
- .get_platform_data = &max3111_platform_data,
-};
-
-sfi_device(max3111_dev_id);
diff --git a/arch/x86/platform/intel-mid/early_printk_intel_mid.c b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
index e0bd082a80e0..4e720829ab90 100644
--- a/arch/x86/platform/intel-mid/early_printk_intel_mid.c
+++ b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
@@ -10,15 +10,13 @@
*/
/*
- * This file implements two early consoles named mrst and hsu.
- * mrst is based on Maxim3110 spi-uart device, it exists in both
- * Moorestown and Medfield platforms, while hsu is based on a High
- * Speed UART device which only exists in the Medfield platform
+ * This file implements early console named hsu.
+ * hsu is based on a High Speed UART device which only exists in the Medfield
+ * platform
*/
#include <linux/serial_reg.h>
#include <linux/serial_mfd.h>
-#include <linux/kmsg_dump.h>
#include <linux/console.h>
#include <linux/kernel.h>
#include <linux/delay.h>
@@ -28,216 +26,6 @@
#include <asm/pgtable.h>
#include <asm/intel-mid.h>
-#define MRST_SPI_TIMEOUT 0x200000
-#define MRST_REGBASE_SPI0 0xff128000
-#define MRST_REGBASE_SPI1 0xff128400
-#define MRST_CLK_SPI0_REG 0xff11d86c
-
-/* Bit fields in CTRLR0 */
-#define SPI_DFS_OFFSET 0
-
-#define SPI_FRF_OFFSET 4
-#define SPI_FRF_SPI 0x0
-#define SPI_FRF_SSP 0x1
-#define SPI_FRF_MICROWIRE 0x2
-#define SPI_FRF_RESV 0x3
-
-#define SPI_MODE_OFFSET 6
-#define SPI_SCPH_OFFSET 6
-#define SPI_SCOL_OFFSET 7
-#define SPI_TMOD_OFFSET 8
-#define SPI_TMOD_TR 0x0 /* xmit & recv */
-#define SPI_TMOD_TO 0x1 /* xmit only */
-#define SPI_TMOD_RO 0x2 /* recv only */
-#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */
-
-#define SPI_SLVOE_OFFSET 10
-#define SPI_SRL_OFFSET 11
-#define SPI_CFS_OFFSET 12
-
-/* Bit fields in SR, 7 bits */
-#define SR_MASK 0x7f /* cover 7 bits */
-#define SR_BUSY (1 << 0)
-#define SR_TF_NOT_FULL (1 << 1)
-#define SR_TF_EMPT (1 << 2)
-#define SR_RF_NOT_EMPT (1 << 3)
-#define SR_RF_FULL (1 << 4)
-#define SR_TX_ERR (1 << 5)
-#define SR_DCOL (1 << 6)
-
-struct dw_spi_reg {
- u32 ctrl0;
- u32 ctrl1;
- u32 ssienr;
- u32 mwcr;
- u32 ser;
- u32 baudr;
- u32 txfltr;
- u32 rxfltr;
- u32 txflr;
- u32 rxflr;
- u32 sr;
- u32 imr;
- u32 isr;
- u32 risr;
- u32 txoicr;
- u32 rxoicr;
- u32 rxuicr;
- u32 msticr;
- u32 icr;
- u32 dmacr;
- u32 dmatdlr;
- u32 dmardlr;
- u32 idr;
- u32 version;
-
- /* Currently operates as 32 bits, though only the low 16 bits matter */
- u32 dr;
-} __packed;
-
-#define dw_readl(dw, name) __raw_readl(&(dw)->name)
-#define dw_writel(dw, name, val) __raw_writel((val), &(dw)->name)
-
-/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */
-static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0;
-
-static u32 *pclk_spi0;
-/* Always contains an accessible address, start with 0 */
-static struct dw_spi_reg *pspi;
-
-static struct kmsg_dumper dw_dumper;
-static int dumper_registered;
-
-static void dw_kmsg_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason)
-{
- static char line[1024];
- size_t len;
-
- /* When run to this, we'd better re-init the HW */
- mrst_early_console_init();
-
- while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len))
- early_mrst_console.write(&early_mrst_console, line, len);
-}
-
-/* Set the ratio rate to 115200, 8n1, IRQ disabled */
-static void max3110_write_config(void)
-{
- u16 config;
-
- config = 0xc001;
- dw_writel(pspi, dr, config);
-}
-
-/* Translate char to a eligible word and send to max3110 */
-static void max3110_write_data(char c)
-{
- u16 data;
-
- data = 0x8000 | c;
- dw_writel(pspi, dr, data);
-}
-
-void mrst_early_console_init(void)
-{
- u32 ctrlr0 = 0;
- u32 spi0_cdiv;
- u32 freq; /* Freqency info only need be searched once */
-
- /* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */
- pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
- MRST_CLK_SPI0_REG);
- spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9;
- freq = 100000000 / (spi0_cdiv + 1);
-
- if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL)
- mrst_spi_paddr = MRST_REGBASE_SPI1;
-
- pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
- mrst_spi_paddr);
-
- /* Disable SPI controller */
- dw_writel(pspi, ssienr, 0);
-
- /* Set control param, 8 bits, transmit only mode */
- ctrlr0 = dw_readl(pspi, ctrl0);
-
- ctrlr0 &= 0xfcc0;
- ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET)
- | (SPI_TMOD_TO << SPI_TMOD_OFFSET);
- dw_writel(pspi, ctrl0, ctrlr0);
-
- /*
- * Change the spi0 clk to comply with 115200 bps, use 100000 to
- * calculate the clk dividor to make the clock a little slower
- * than real baud rate.
- */
- dw_writel(pspi, baudr, freq/100000);
-
- /* Disable all INT for early phase */
- dw_writel(pspi, imr, 0x0);
-
- /* Set the cs to spi-uart */
- dw_writel(pspi, ser, 0x2);
-
- /* Enable the HW, the last step for HW init */
- dw_writel(pspi, ssienr, 0x1);
-
- /* Set the default configuration */
- max3110_write_config();
-
- /* Register the kmsg dumper */
- if (!dumper_registered) {
- dw_dumper.dump = dw_kmsg_dump;
- kmsg_dump_register(&dw_dumper);
- dumper_registered = 1;
- }
-}
-
-/* Slave select should be called in the read/write function */
-static void early_mrst_spi_putc(char c)
-{
- unsigned int timeout;
- u32 sr;
-
- timeout = MRST_SPI_TIMEOUT;
- /* Early putc needs to make sure the TX FIFO is not full */
- while (--timeout) {
- sr = dw_readl(pspi, sr);
- if (!(sr & SR_TF_NOT_FULL))
- cpu_relax();
- else
- break;
- }
-
- if (!timeout)
- pr_warn("MRST earlycon: timed out\n");
- else
- max3110_write_data(c);
-}
-
-/* Early SPI only uses polling mode */
-static void early_mrst_spi_write(struct console *con, const char *str,
- unsigned n)
-{
- int i;
-
- for (i = 0; i < n && *str; i++) {
- if (*str == '\n')
- early_mrst_spi_putc('\r');
- early_mrst_spi_putc(*str);
- str++;
- }
-}
-
-struct console early_mrst_console = {
- .name = "earlymrst",
- .write = early_mrst_spi_write,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
/*
* Following is the early console based on Medfield HSU (High
* Speed UART) device.
@@ -259,7 +47,7 @@ void hsu_early_console_init(const char *s)
port = clamp_val(port, 0, 2);
paddr = HSU_PORT_BASE + port * 0x80;
- phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr);
+ phsu = (void __iomem *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr);
/* Disable FIFO */
writeb(0x0, phsu + UART_FCR);
diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c
index 2ff6dfd2d3f0..9c4dcf4c62ea 100644
--- a/drivers/bluetooth/hci_ath.c
+++ b/drivers/bluetooth/hci_ath.c
@@ -51,33 +51,22 @@ struct ath_struct {
static int ath_wakeup_ar3k(struct tty_struct *tty)
{
- struct ktermios ktermios;
int status = tty->driver->ops->tiocmget(tty);
if (status & TIOCM_CTS)
return status;
- /* Disable Automatic RTSCTS */
- ktermios = tty->termios;
- ktermios.c_cflag &= ~CRTSCTS;
- tty_set_termios(tty, &ktermios);
-
/* Clear RTS first */
- status = tty->driver->ops->tiocmget(tty);
+ tty->driver->ops->tiocmget(tty);
tty->driver->ops->tiocmset(tty, 0x00, TIOCM_RTS);
mdelay(20);
/* Set RTS, wake up board */
- status = tty->driver->ops->tiocmget(tty);
+ tty->driver->ops->tiocmget(tty);
tty->driver->ops->tiocmset(tty, TIOCM_RTS, 0x00);
mdelay(20);
status = tty->driver->ops->tiocmget(tty);
-
- /* Enable Automatic RTSCTS */
- ktermios.c_cflag |= CRTSCTS;
- status = tty_set_termios(tty, &ktermios);
-
return status;
}
diff --git a/drivers/pnp/driver.c b/drivers/pnp/driver.c
index f748cc8cbb03..4e57d3370368 100644
--- a/drivers/pnp/driver.c
+++ b/drivers/pnp/driver.c
@@ -182,7 +182,7 @@ static int __pnp_bus_suspend(struct device *dev, pm_message_t state)
return error;
}
- if (pnp_dev->protocol->suspend)
+ if (pnp_can_suspend(pnp_dev))
pnp_dev->protocol->suspend(pnp_dev, state);
return 0;
}
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index d9f85f95eb2a..b2d760055952 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -931,7 +931,7 @@ static void rs_send_xchar(struct tty_struct *tty, char ch)
struct serial_state *info = tty->driver_data;
unsigned long flags;
- if (serial_paranoia_check(info, tty->name, "rs_send_char"))
+ if (serial_paranoia_check(info, tty->name, "rs_send_xchar"))
return;
info->x_char = ch;
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index 3c60923b0957..342b36b9ad35 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -112,7 +112,6 @@ static void disable_tx_interrupt(struct ehv_bc_data *bc)
static int find_console_handle(void)
{
struct device_node *np = of_stdout;
- const char *sprop = NULL;
const uint32_t *iprop;
/* We don't care what the aliased node is actually called. We only
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index 59ed783c4bcd..2054427992e0 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -1055,7 +1055,7 @@ static int isicom_send_break(struct tty_struct *tty, int length)
outw(0x8000 | ((port->channel) << (card->shift_count)) | 0x3, base);
outw((length & 0xff) << 8 | 0x00, base);
- outw((length & 0xff00), base);
+ outw((length & 0xff00u), base);
InterruptTheCard(base);
unlock_card(card);
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 4ddfa60c9222..cf6e0f2e1331 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -90,6 +90,7 @@
struct n_tty_data {
/* producer-published */
size_t read_head;
+ size_t commit_head;
size_t canon_head;
size_t echo_head;
size_t echo_commit;
@@ -161,36 +162,11 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
return put_user(x, ptr);
}
-static int receive_room(struct tty_struct *tty)
-{
- struct n_tty_data *ldata = tty->disc_data;
- int left;
-
- if (I_PARMRK(tty)) {
- /* Multiply read_cnt by 3, since each byte might take up to
- * three times as many spaces when PARMRK is set (depending on
- * its flags, e.g. parity error). */
- left = N_TTY_BUF_SIZE - read_cnt(ldata) * 3 - 1;
- } else
- left = N_TTY_BUF_SIZE - read_cnt(ldata) - 1;
-
- /*
- * If we are doing input canonicalization, and there are no
- * pending newlines, let characters through without limit, so
- * that erase characters will be handled. Other excess
- * characters will be beeped.
- */
- if (left <= 0)
- left = ldata->icanon && ldata->canon_head == ldata->read_tail;
-
- return left;
-}
-
/**
- * n_tty_set_room - receive space
+ * n_tty_kick_worker - start input worker (if required)
* @tty: terminal
*
- * Re-schedules the flip buffer work if space just became available.
+ * Re-schedules the flip buffer work if it may have stopped
*
* Caller holds exclusive termios_rwsem
* or
@@ -198,12 +174,12 @@ static int receive_room(struct tty_struct *tty)
* holds non-exclusive termios_rwsem
*/
-static void n_tty_set_room(struct tty_struct *tty)
+static void n_tty_kick_worker(struct tty_struct *tty)
{
struct n_tty_data *ldata = tty->disc_data;
- /* Did this open up the receive buffer? We may need to flip */
- if (unlikely(ldata->no_room) && receive_room(tty)) {
+ /* Did the input worker stop? Restart it */
+ if (unlikely(ldata->no_room)) {
ldata->no_room = 0;
WARN_RATELIMIT(tty->port->itty == NULL,
@@ -224,7 +200,7 @@ static ssize_t chars_in_buffer(struct tty_struct *tty)
ssize_t n = 0;
if (!ldata->icanon)
- n = read_cnt(ldata);
+ n = ldata->commit_head - ldata->read_tail;
else
n = ldata->canon_head - ldata->read_tail;
return n;
@@ -247,17 +223,20 @@ static void n_tty_write_wakeup(struct tty_struct *tty)
static void n_tty_check_throttle(struct tty_struct *tty)
{
- if (tty->driver->type == TTY_DRIVER_TYPE_PTY)
- return;
+ struct n_tty_data *ldata = tty->disc_data;
+
/*
* Check the remaining room for the input canonicalization
* mode. We don't want to throttle the driver if we're in
* canonical mode and don't have a newline yet!
*/
+ if (ldata->icanon && ldata->canon_head == ldata->read_tail)
+ return;
+
while (1) {
int throttled;
tty_set_flow_change(tty, TTY_THROTTLE_SAFE);
- if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE)
+ if (N_TTY_BUF_SIZE - read_cnt(ldata) >= TTY_THRESHOLD_THROTTLE)
break;
throttled = tty_throttle_safe(tty);
if (!throttled)
@@ -274,7 +253,7 @@ static void n_tty_check_unthrottle(struct tty_struct *tty)
return;
if (!tty->count)
return;
- n_tty_set_room(tty);
+ n_tty_kick_worker(tty);
n_tty_write_wakeup(tty->link);
if (waitqueue_active(&tty->link->write_wait))
wake_up_interruptible_poll(&tty->link->write_wait, POLLOUT);
@@ -296,7 +275,7 @@ static void n_tty_check_unthrottle(struct tty_struct *tty)
break;
if (!tty->count)
break;
- n_tty_set_room(tty);
+ n_tty_kick_worker(tty);
unthrottled = tty_unthrottle_safe(tty);
if (!unthrottled)
break;
@@ -313,10 +292,6 @@ static void n_tty_check_unthrottle(struct tty_struct *tty)
*
* n_tty_receive_buf()/producer path:
* caller holds non-exclusive termios_rwsem
- * modifies read_head
- *
- * read_head is only considered 'published' if canonical mode is
- * not active.
*/
static inline void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
@@ -340,6 +315,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
{
ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
ldata->echo_head = ldata->echo_tail = ldata->echo_commit = 0;
+ ldata->commit_head = 0;
ldata->echo_mark = 0;
ldata->line_start = 0;
@@ -379,7 +355,7 @@ static void n_tty_flush_buffer(struct tty_struct *tty)
{
down_write(&tty->termios_rwsem);
reset_buffer_flags(tty->disc_data);
- n_tty_set_room(tty);
+ n_tty_kick_worker(tty);
if (tty->link)
n_tty_packet_mode_flush(tty);
@@ -987,10 +963,6 @@ static inline void finish_erasing(struct n_tty_data *ldata)
*
* n_tty_receive_buf()/producer path:
* caller holds non-exclusive termios_rwsem
- * modifies read_head
- *
- * Modifying the read_head is not considered a publish in this context
- * because canonical mode is active -- only canon_head publishes
*/
static void eraser(unsigned char c, struct tty_struct *tty)
@@ -1118,16 +1090,45 @@ static void eraser(unsigned char c, struct tty_struct *tty)
* Called when a signal is being sent due to terminal input.
* Called from the driver receive_buf path so serialized.
*
+ * Performs input and output flush if !NOFLSH. In this context, the echo
+ * buffer is 'output'. The signal is processed first to alert any current
+ * readers or writers to discontinue and exit their i/o loops.
+ *
* Locking: ctrl_lock
*/
static void isig(int sig, struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
struct pid *tty_pgrp = tty_get_pgrp(tty);
if (tty_pgrp) {
kill_pgrp(tty_pgrp, sig, 1);
put_pid(tty_pgrp);
}
+
+ if (!L_NOFLSH(tty)) {
+ up_read(&tty->termios_rwsem);
+ down_write(&tty->termios_rwsem);
+
+ /* clear echo buffer */
+ mutex_lock(&ldata->output_lock);
+ ldata->echo_head = ldata->echo_tail = 0;
+ ldata->echo_mark = ldata->echo_commit = 0;
+ mutex_unlock(&ldata->output_lock);
+
+ /* clear output buffer */
+ tty_driver_flush_buffer(tty);
+
+ /* clear input buffer */
+ reset_buffer_flags(tty->disc_data);
+
+ /* notify pty master of flush */
+ if (tty->link)
+ n_tty_packet_mode_flush(tty);
+
+ up_write(&tty->termios_rwsem);
+ down_read(&tty->termios_rwsem);
+ }
}
/**
@@ -1139,7 +1140,6 @@ static void isig(int sig, struct tty_struct *tty)
*
* n_tty_receive_buf()/producer path:
* caller holds non-exclusive termios_rwsem
- * publishes read_head via put_tty_queue()
*
* Note: may get exclusive termios_rwsem if flushing input buffer
*/
@@ -1152,13 +1152,6 @@ static void n_tty_receive_break(struct tty_struct *tty)
return;
if (I_BRKINT(tty)) {
isig(SIGINT, tty);
- if (!L_NOFLSH(tty)) {
- /* flushing needs exclusive termios_rwsem */
- up_read(&tty->termios_rwsem);
- n_tty_flush_buffer(tty);
- tty_driver_flush_buffer(tty);
- down_read(&tty->termios_rwsem);
- }
return;
}
if (I_PARMRK(tty)) {
@@ -1209,7 +1202,6 @@ static void n_tty_receive_overrun(struct tty_struct *tty)
*
* n_tty_receive_buf()/producer path:
* caller holds non-exclusive termios_rwsem
- * publishes read_head via put_tty_queue()
*/
static void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c)
{
@@ -1233,13 +1225,7 @@ static void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c)
static void
n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c)
{
- if (!L_NOFLSH(tty)) {
- /* flushing needs exclusive termios_rwsem */
- up_read(&tty->termios_rwsem);
- n_tty_flush_buffer(tty);
- tty_driver_flush_buffer(tty);
- down_read(&tty->termios_rwsem);
- }
+ isig(signal, tty);
if (I_IXON(tty))
start_tty(tty);
if (L_ECHO(tty)) {
@@ -1247,7 +1233,6 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c)
commit_echoes(tty);
} else
process_echoes(tty);
- isig(signal, tty);
return;
}
@@ -1263,7 +1248,6 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c)
* n_tty_receive_buf()/producer path:
* caller holds non-exclusive termios_rwsem
* publishes canon_head if canonical mode is active
- * otherwise, publishes read_head via put_tty_queue()
*
* Returns 1 if LNEXT was received, else returns 0
*/
@@ -1376,7 +1360,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
handle_newline:
set_bit(ldata->read_head & (N_TTY_BUF_SIZE - 1), ldata->read_flags);
put_tty_queue(c, ldata);
- ldata->canon_head = ldata->read_head;
+ smp_store_release(&ldata->canon_head, ldata->read_head);
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
wake_up_interruptible_poll(&tty->read_wait, POLLIN);
@@ -1512,23 +1496,6 @@ n_tty_receive_char_lnext(struct tty_struct *tty, unsigned char c, char flag)
n_tty_receive_char_flagged(tty, c, flag);
}
-/**
- * n_tty_receive_buf - data receive
- * @tty: terminal device
- * @cp: buffer
- * @fp: flag buffer
- * @count: characters
- *
- * Called by the terminal driver when a block of characters has
- * been received. This function must be called from soft contexts
- * not from interrupt context. The driver is responsible for making
- * calls one at a time and in order (or using flush_to_ldisc)
- *
- * n_tty_receive_buf()/producer path:
- * claims non-exclusive termios_rwsem
- * publishes read_head and canon_head
- */
-
static void
n_tty_receive_buf_real_raw(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
@@ -1537,16 +1504,14 @@ n_tty_receive_buf_real_raw(struct tty_struct *tty, const unsigned char *cp,
size_t n, head;
head = ldata->read_head & (N_TTY_BUF_SIZE - 1);
- n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head);
- n = min_t(size_t, count, n);
+ n = min_t(size_t, count, N_TTY_BUF_SIZE - head);
memcpy(read_buf_addr(ldata, head), cp, n);
ldata->read_head += n;
cp += n;
count -= n;
head = ldata->read_head & (N_TTY_BUF_SIZE - 1);
- n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head);
- n = min_t(size_t, count, n);
+ n = min_t(size_t, count, N_TTY_BUF_SIZE - head);
memcpy(read_buf_addr(ldata, head), cp, n);
ldata->read_head += n;
}
@@ -1676,32 +1641,98 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
tty->ops->flush_chars(tty);
}
- if ((!ldata->icanon && (read_cnt(ldata) >= ldata->minimum_to_wake)) ||
- L_EXTPROC(tty)) {
+ if (ldata->icanon && !L_EXTPROC(tty))
+ return;
+
+ /* publish read_head to consumer */
+ smp_store_release(&ldata->commit_head, ldata->read_head);
+
+ if ((read_cnt(ldata) >= ldata->minimum_to_wake) || L_EXTPROC(tty)) {
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
wake_up_interruptible_poll(&tty->read_wait, POLLIN);
}
}
+/**
+ * n_tty_receive_buf_common - process input
+ * @tty: device to receive input
+ * @cp: input chars
+ * @fp: flags for each char (if NULL, all chars are TTY_NORMAL)
+ * @count: number of input chars in @cp
+ *
+ * Called by the terminal driver when a block of characters has
+ * been received. This function must be called from soft contexts
+ * not from interrupt context. The driver is responsible for making
+ * calls one at a time and in order (or using flush_to_ldisc)
+ *
+ * Returns the # of input chars from @cp which were processed.
+ *
+ * In canonical mode, the maximum line length is 4096 chars (including
+ * the line termination char); lines longer than 4096 chars are
+ * truncated. After 4095 chars, input data is still processed but
+ * not stored. Overflow processing ensures the tty can always
+ * receive more input until at least one line can be read.
+ *
+ * In non-canonical mode, the read buffer will only accept 4095 chars;
+ * this provides the necessary space for a newline char if the input
+ * mode is switched to canonical.
+ *
+ * Note it is possible for the read buffer to _contain_ 4096 chars
+ * in non-canonical mode: the read buffer could already contain the
+ * maximum canon line of 4096 chars when the mode is switched to
+ * non-canonical.
+ *
+ * n_tty_receive_buf()/producer path:
+ * claims non-exclusive termios_rwsem
+ * publishes commit_head or canon_head
+ */
static int
n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count, int flow)
{
struct n_tty_data *ldata = tty->disc_data;
- int room, n, rcvd = 0;
+ int room, n, rcvd = 0, overflow;
down_read(&tty->termios_rwsem);
while (1) {
- room = receive_room(tty);
+ /*
+ * When PARMRK is set, each input char may take up to 3 chars
+ * in the read buf; reduce the buffer space avail by 3x
+ *
+ * If we are doing input canonicalization, and there are no
+ * pending newlines, let characters through without limit, so
+ * that erase characters will be handled. Other excess
+ * characters will be beeped.
+ *
+ * paired with store in *_copy_from_read_buf() -- guarantees
+ * the consumer has loaded the data in read_buf up to the new
+ * read_tail (so this producer will not overwrite unread data)
+ */
+ size_t tail = smp_load_acquire(&ldata->read_tail);
+
+ room = N_TTY_BUF_SIZE - (ldata->read_head - tail);
+ if (I_PARMRK(tty))
+ room = (room + 2) / 3;
+ room--;
+ if (room <= 0) {
+ overflow = ldata->icanon && ldata->canon_head == tail;
+ if (overflow && room < 0)
+ ldata->read_head--;
+ room = overflow;
+ ldata->no_room = flow && !room;
+ } else
+ overflow = 0;
+
n = min(count, room);
- if (!n) {
- if (flow && !room)
- ldata->no_room = 1;
+ if (!n)
break;
- }
- __receive_buf(tty, cp, fp, n);
+
+ /* ignore parity errors if handling overflow */
+ if (!overflow || !fp || *fp != TTY_PARITY)
+ __receive_buf(tty, cp, fp, n);
+
cp += n;
if (fp)
fp += n;
@@ -1710,7 +1741,17 @@ n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp,
}
tty->receive_room = room;
- n_tty_check_throttle(tty);
+
+ /* Unthrottle if handling overflow on pty */
+ if (tty->driver->type == TTY_DRIVER_TYPE_PTY) {
+ if (overflow) {
+ tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE);
+ tty_unthrottle_safe(tty);
+ __tty_set_flow_change(tty, 0);
+ }
+ } else
+ n_tty_check_throttle(tty);
+
up_read(&tty->termios_rwsem);
return rcvd;
@@ -1764,6 +1805,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
ldata->canon_head = ldata->read_head;
ldata->push = 1;
}
+ ldata->commit_head = ldata->read_head;
ldata->erasing = 0;
ldata->lnext = 0;
}
@@ -1817,7 +1859,6 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
else
ldata->real_raw = 0;
}
- n_tty_set_room(tty);
/*
* Fix tty hang when I_IXON(tty) is cleared, but the tty
* been stopped by STOP_CHAR(tty) before it.
@@ -1905,7 +1946,7 @@ static inline int input_available_p(struct tty_struct *tty, int poll)
if (ldata->icanon && !L_EXTPROC(tty))
return ldata->canon_head != ldata->read_tail;
else
- return read_cnt(ldata) >= amt;
+ return ldata->commit_head - ldata->read_tail >= amt;
}
/**
@@ -1937,10 +1978,11 @@ static int copy_from_read_buf(struct tty_struct *tty,
int retval;
size_t n;
bool is_eof;
+ size_t head = smp_load_acquire(&ldata->commit_head);
size_t tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1);
retval = 0;
- n = min(read_cnt(ldata), N_TTY_BUF_SIZE - tail);
+ n = min(head - ldata->read_tail, N_TTY_BUF_SIZE - tail);
n = min(*nr, n);
if (n) {
retval = copy_to_user(*b, read_buf_addr(ldata, tail), n);
@@ -1948,9 +1990,10 @@ static int copy_from_read_buf(struct tty_struct *tty,
is_eof = n == 1 && read_buf(ldata, tail) == EOF_CHAR(tty);
tty_audit_add_data(tty, read_buf_addr(ldata, tail), n,
ldata->icanon);
- ldata->read_tail += n;
+ smp_store_release(&ldata->read_tail, ldata->read_tail + n);
/* Turn single EOF into zero-length read */
- if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata))
+ if (L_EXTPROC(tty) && ldata->icanon && is_eof &&
+ (head == ldata->read_tail))
n = 0;
*b += n;
*nr -= n;
@@ -1993,7 +2036,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
bool eof_push = 0;
/* N.B. avoid overrun if nr == 0 */
- n = min(*nr, read_cnt(ldata));
+ n = min(*nr, smp_load_acquire(&ldata->canon_head) - ldata->read_tail);
if (!n)
return 0;
@@ -2043,8 +2086,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
if (found)
clear_bit(eol, ldata->read_flags);
- smp_mb__after_atomic();
- ldata->read_tail += c;
+ smp_store_release(&ldata->read_tail, ldata->read_tail + c);
if (found) {
if (!ldata->push)
@@ -2130,6 +2172,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
ssize_t retval = 0;
long timeout;
int packet;
+ size_t tail;
c = job_control(tty, file);
if (c < 0)
@@ -2166,6 +2209,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
}
packet = tty->packet;
+ tail = ldata->read_tail;
add_wait_queue(&tty->read_wait, &wait);
while (nr) {
@@ -2208,7 +2252,6 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
retval = -ERESTARTSYS;
break;
}
- n_tty_set_room(tty);
up_read(&tty->termios_rwsem);
timeout = wait_woken(&wait, TASK_INTERRUPTIBLE,
@@ -2253,7 +2296,8 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
if (time)
timeout = time;
}
- n_tty_set_room(tty);
+ if (tail != ldata->read_tail)
+ n_tty_kick_worker(tty);
up_read(&tty->termios_rwsem);
remove_wait_queue(&tty->read_wait, &wait);
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index a9d256d6e909..e72ee629cead 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -88,19 +88,6 @@ static void pty_unthrottle(struct tty_struct *tty)
}
/**
- * pty_space - report space left for writing
- * @to: tty we are writing into
- *
- * Limit the buffer space used by ptys to 8k.
- */
-
-static int pty_space(struct tty_struct *to)
-{
- int n = tty_buffer_space_avail(to->port);
- return min(n, 8192);
-}
-
-/**
* pty_write - write to a pty
* @tty: the tty we write from
* @buf: kernel buffer of data
@@ -141,7 +128,7 @@ static int pty_write_room(struct tty_struct *tty)
{
if (tty->stopped)
return 0;
- return pty_space(tty->link);
+ return tty_buffer_space_avail(tty->link->port);
}
/**
@@ -210,6 +197,9 @@ static int pty_signal(struct tty_struct *tty, int sig)
{
struct pid *pgrp;
+ if (sig != SIGINT && sig != SIGQUIT && sig != SIGTSTP)
+ return -EINVAL;
+
if (tty->link) {
pgrp = tty_get_pgrp(tty->link);
if (pgrp)
@@ -222,10 +212,16 @@ static int pty_signal(struct tty_struct *tty, int sig)
static void pty_flush_buffer(struct tty_struct *tty)
{
struct tty_struct *to = tty->link;
+ struct tty_ldisc *ld;
if (!to)
return;
- /* tty_buffer_flush(to); FIXME */
+
+ ld = tty_ldisc_ref(to);
+ tty_buffer_flush(to, ld);
+ if (ld)
+ tty_ldisc_deref(ld);
+
if (to->packet) {
spin_lock_irq(&tty->ctrl_lock);
tty->ctrl_status |= TIOCPKT_FLUSHWRITE;
@@ -399,6 +395,7 @@ static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty,
goto err_put_module;
tty_set_lock_subclass(o_tty);
+ lockdep_set_subclass(&o_tty->termios_rwsem, TTY_LOCK_SLAVE);
if (legacy) {
/* We always use new tty termios data so we can do this
@@ -429,10 +426,14 @@ static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty,
o_tty->link = tty;
tty_port_init(ports[0]);
tty_port_init(ports[1]);
+ tty_buffer_set_limit(ports[0], 8192);
+ tty_buffer_set_limit(ports[1], 8192);
o_tty->port = ports[0];
tty->port = ports[1];
o_tty->port->itty = o_tty;
+ tty_buffer_set_lock_subclass(o_tty->port);
+
tty_driver_kref_get(driver);
tty->count++;
o_tty->count++;
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 383c4c796637..c8dd8dc31086 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -1390,7 +1390,7 @@ static void rp_unthrottle(struct tty_struct *tty)
tty->ldisc.chars_in_buffer(tty));
#endif
- if (rocket_paranoia_check(info, "rp_throttle"))
+ if (rocket_paranoia_check(info, "rp_unthrottle"))
return;
if (I_IXOFF(tty))
@@ -1458,7 +1458,7 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout)
orig_jiffies = jiffies;
#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
- printk(KERN_INFO "In RP_wait_until_sent(%d) (jiff=%lu)...\n", timeout,
+ printk(KERN_INFO "In %s(%d) (jiff=%lu)...\n", __func__, timeout,
jiffies);
printk(KERN_INFO "cps=%d...\n", info->cps);
#endif
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 11c66856ba2f..e3b9570a1eff 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -329,6 +329,17 @@ static const struct serial8250_config uart_config[] = {
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.flags = UART_CAP_FIFO | UART_CAP_AFE,
},
+/* tx_loadsz is set to 63-bytes instead of 64-bytes to implement
+workaround of errata A-008006 which states that tx_loadsz should be
+configured less than Maximum supported fifo bytes */
+ [PORT_16550A_FSL64] = {
+ .name = "16550A_FSL64",
+ .fifo_size = 64,
+ .tx_loadsz = 63,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
+ UART_FCR7_64BYTE,
+ .flags = UART_CAP_FIFO,
+ },
};
/* Uart divisor latch read */
@@ -956,7 +967,17 @@ static void autoconfig_16550a(struct uart_8250_port *up)
up->port.type = PORT_16650;
up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
} else {
- DEBUG_AUTOCONF("Motorola 8xxx DUART ");
+ serial_out(up, UART_LCR, 0);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR7_64BYTE);
+ status1 = serial_in(up, UART_IIR) >> 5;
+ serial_out(up, UART_FCR, 0);
+ serial_out(up, UART_LCR, 0);
+
+ if (status1 == 7)
+ up->port.type = PORT_16550A_FSL64;
+ else
+ DEBUG_AUTOCONF("Motorola 8xxx DUART ");
}
serial_out(up, UART_EFR, 0);
return;
@@ -1355,9 +1376,11 @@ static void serial8250_start_tx(struct uart_port *port)
struct uart_8250_port *up = up_to_u8250p(port);
serial8250_rpm_get_tx(up);
- if (up->dma && !up->dma->tx_dma(up)) {
+
+ if (up->dma && !up->dma->tx_dma(up))
return;
- } else if (!(up->ier & UART_IER_THRI)) {
+
+ if (!(up->ier & UART_IER_THRI)) {
up->ier |= UART_IER_THRI;
serial_port_out(port, UART_IER, up->ier);
@@ -1365,7 +1388,7 @@ static void serial8250_start_tx(struct uart_port *port)
unsigned char lsr;
lsr = serial_in(up, UART_LSR);
up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
- if (lsr & UART_LSR_TEMT)
+ if (lsr & UART_LSR_THRE)
serial8250_tx_chars(up);
}
}
@@ -1924,7 +1947,7 @@ static unsigned int serial8250_get_mctrl(struct uart_port *port)
return ret;
}
-static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
struct uart_8250_port *up = up_to_u8250p(port);
unsigned char mcr = 0;
@@ -1944,6 +1967,14 @@ static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
serial_port_out(port, UART_MCR, mcr);
}
+EXPORT_SYMBOL_GPL(serial8250_do_set_mctrl);
+
+static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ if (port->set_mctrl)
+ return port->set_mctrl(port, mctrl);
+ return serial8250_do_set_mctrl(port, mctrl);
+}
static void serial8250_break_ctl(struct uart_port *port, int break_state)
{
@@ -2382,13 +2413,34 @@ static void serial8250_shutdown(struct uart_port *port)
serial8250_do_shutdown(port);
}
-static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
+/*
+ * XR17V35x UARTs have an extra fractional divisor register (DLD)
+ * Calculate divisor with extra 4-bit fractional portion
+ */
+static unsigned int xr17v35x_get_divisor(struct uart_8250_port *up,
+ unsigned int baud,
+ unsigned int *frac)
+{
+ struct uart_port *port = &up->port;
+ unsigned int quot_16;
+
+ quot_16 = DIV_ROUND_CLOSEST(port->uartclk, baud);
+ *frac = quot_16 & 0x0f;
+
+ return quot_16 >> 4;
+}
+
+static unsigned int serial8250_get_divisor(struct uart_8250_port *up,
+ unsigned int baud,
+ unsigned int *frac)
{
+ struct uart_port *port = &up->port;
unsigned int quot;
/*
* Handle magic divisors for baud rates above baud_base on
* SMSC SuperIO chips.
+ *
*/
if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
baud == (port->uartclk/4))
@@ -2396,22 +2448,26 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int
else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
baud == (port->uartclk/8))
quot = 0x8002;
+ else if (up->port.type == PORT_XR17V35X)
+ quot = xr17v35x_get_divisor(up, baud, frac);
else
quot = uart_get_divisor(port, baud);
+ /*
+ * Oxford Semi 952 rev B workaround
+ */
+ if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0)
+ quot++;
+
return quot;
}
-void
-serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
+static unsigned char serial8250_compute_lcr(struct uart_8250_port *up,
+ tcflag_t c_cflag)
{
- struct uart_8250_port *up = up_to_u8250p(port);
unsigned char cval;
- unsigned long flags;
- unsigned int baud, quot;
- switch (termios->c_cflag & CSIZE) {
+ switch (c_cflag & CSIZE) {
case CS5:
cval = UART_LCR_WLEN5;
break;
@@ -2427,33 +2483,80 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
break;
}
- if (termios->c_cflag & CSTOPB)
+ if (c_cflag & CSTOPB)
cval |= UART_LCR_STOP;
- if (termios->c_cflag & PARENB) {
+ if (c_cflag & PARENB) {
cval |= UART_LCR_PARITY;
if (up->bugs & UART_BUG_PARITY)
up->fifo_bug = true;
}
- if (!(termios->c_cflag & PARODD))
+ if (!(c_cflag & PARODD))
cval |= UART_LCR_EPAR;
#ifdef CMSPAR
- if (termios->c_cflag & CMSPAR)
+ if (c_cflag & CMSPAR)
cval |= UART_LCR_SPAR;
#endif
+ return cval;
+}
+
+static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
+ unsigned int quot, unsigned int quot_frac)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+
+ /* Workaround to enable 115200 baud on OMAP1510 internal ports */
+ if (is_omap1510_8250(up)) {
+ if (baud == 115200) {
+ quot = 1;
+ serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1);
+ } else
+ serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0);
+ }
+
+ /*
+ * For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2,
+ * otherwise just set DLAB
+ */
+ if (up->capabilities & UART_NATSEMI)
+ serial_port_out(port, UART_LCR, 0xe0);
+ else
+ serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB);
+
+ serial_dl_write(up, quot);
+
+ /* XR17V35x UARTs have an extra fractional divisor register (DLD) */
+ if (up->port.type == PORT_XR17V35X)
+ serial_port_out(port, 0x2, quot_frac);
+}
+
+void
+serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ unsigned char cval;
+ unsigned long flags;
+ unsigned int baud, quot, frac = 0;
+
+ cval = serial8250_compute_lcr(up, termios->c_cflag);
+
/*
* Ask the core to calculate the divisor for us.
*/
baud = uart_get_baud_rate(port, termios, old,
port->uartclk / 16 / 0xffff,
port->uartclk / 16);
- quot = serial8250_get_divisor(port, baud);
+ quot = serial8250_get_divisor(up, baud, &frac);
/*
- * Oxford Semi 952 rev B workaround
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
*/
- if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0)
- quot++;
+ serial8250_rpm_get(up);
+ spin_lock_irqsave(&port->lock, flags);
+
+ up->lcr = cval; /* Save computed LCR */
if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
/* NOTE: If fifo_bug is not set, a user can set RX_trigger. */
@@ -2478,13 +2581,6 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
}
/*
- * Ok, we're now changing the port state. Do it with
- * interrupts disabled.
- */
- serial8250_rpm_get(up);
- spin_lock_irqsave(&port->lock, flags);
-
- /*
* Update the per-port timeout.
*/
uart_update_timeout(port, termios->c_cflag, baud);
@@ -2548,43 +2644,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
serial_port_out(port, UART_EFR, efr);
}
- /* Workaround to enable 115200 baud on OMAP1510 internal ports */
- if (is_omap1510_8250(up)) {
- if (baud == 115200) {
- quot = 1;
- serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1);
- } else
- serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0);
- }
-
- /*
- * For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2,
- * otherwise just set DLAB
- */
- if (up->capabilities & UART_NATSEMI)
- serial_port_out(port, UART_LCR, 0xe0);
- else
- serial_port_out(port, UART_LCR, cval | UART_LCR_DLAB);
-
- serial_dl_write(up, quot);
-
- /*
- * XR17V35x UARTs have an extra fractional divisor register (DLD)
- *
- * We need to recalculate all of the registers, because DLM and DLL
- * are already rounded to a whole integer.
- *
- * When recalculating we use a 32x clock instead of a 16x clock to
- * allow 1-bit for rounding in the fractional part.
- */
- if (up->port.type == PORT_XR17V35X) {
- unsigned int baud_x32 = (port->uartclk * 2) / baud;
- u16 quot = baud_x32 / 32;
- u8 quot_frac = DIV_ROUND_CLOSEST(baud_x32 % 32, 2);
-
- serial_dl_write(up, quot);
- serial_port_out(port, 0x2, quot_frac & 0xf);
- }
+ serial8250_set_divisor(port, baud, quot, frac);
/*
* LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
@@ -2593,8 +2653,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
if (port->type == PORT_16750)
serial_port_out(port, UART_FCR, up->fcr);
- serial_port_out(port, UART_LCR, cval); /* reset DLAB */
- up->lcr = cval; /* Save LCR */
+ serial_port_out(port, UART_LCR, up->lcr); /* reset DLAB */
if (port->type != PORT_16750) {
/* emulated UARTs (Lucent Venus 167x) need two steps */
if (up->fcr & UART_FCR_ENABLE_FIFO)
@@ -3208,6 +3267,27 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
else
serial_port_out(port, UART_IER, 0);
+ /* check scratch reg to see if port powered off during system sleep */
+ if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) {
+ struct ktermios termios;
+ unsigned int baud, quot, frac = 0;
+
+ termios.c_cflag = port->cons->cflag;
+ if (port->state->port.tty && termios.c_cflag == 0)
+ termios.c_cflag = port->state->port.tty->termios.c_cflag;
+
+ baud = uart_get_baud_rate(port, &termios, NULL,
+ port->uartclk / 16 / 0xffff,
+ port->uartclk / 16);
+ quot = serial8250_get_divisor(up, baud, &frac);
+
+ serial8250_set_divisor(port, baud, quot, frac);
+ serial_port_out(port, UART_LCR, up->lcr);
+ serial_port_out(port, UART_MCR, UART_MCR_DTR | UART_MCR_RTS);
+
+ up->canary = 0;
+ }
+
uart_console_write(port, s, count, serial8250_console_putchar);
/*
@@ -3358,7 +3438,17 @@ int __init early_serial_setup(struct uart_port *port)
*/
void serial8250_suspend_port(int line)
{
- uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port);
+ struct uart_8250_port *up = &serial8250_ports[line];
+ struct uart_port *port = &up->port;
+
+ if (!console_suspend_enabled && uart_console(port) &&
+ port->type != PORT_8250) {
+ unsigned char canary = 0xa5;
+ serial_out(up, UART_SCR, canary);
+ up->canary = canary;
+ }
+
+ uart_suspend_port(&serial8250_reg, port);
}
/**
@@ -3372,6 +3462,8 @@ void serial8250_resume_port(int line)
struct uart_8250_port *up = &serial8250_ports[line];
struct uart_port *port = &up->port;
+ up->canary = 0;
+
if (up->capabilities & UART_NATSEMI) {
/* Ensure it's still in high speed mode */
serial_port_out(port, UART_LCR, 0xE0);
@@ -3605,6 +3697,8 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
/* Possibly override set_termios call */
if (up->port.set_termios)
uart->port.set_termios = up->port.set_termios;
+ if (up->port.set_mctrl)
+ uart->port.set_mctrl = up->port.set_mctrl;
if (up->port.startup)
uart->port.startup = up->port.startup;
if (up->port.shutdown)
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index fcd7ac6af2fc..21d01a491405 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -59,7 +59,6 @@ static void __dma_rx_complete(void *param)
dma->rx_running = 0;
dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
- dmaengine_terminate_all(dma->rxchan);
count = dma->rx_size - state.residue;
@@ -81,6 +80,10 @@ int serial8250_tx_dma(struct uart_8250_port *p)
return 0;
dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ if (dma->tx_size < p->port.fifosize) {
+ ret = -EINVAL;
+ goto err;
+ }
desc = dmaengine_prep_slave_single(dma->txchan,
dma->tx_addr + xmit->tail,
@@ -131,6 +134,7 @@ int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
if (dma->rx_running) {
dmaengine_pause(dma->rxchan);
__dma_rx_complete(p);
+ dmaengine_terminate_all(dma->rxchan);
}
return -ETIMEDOUT;
default:
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 555de07db593..e60116235836 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -351,10 +351,20 @@ static int dw8250_probe_of(struct uart_port *p,
static int dw8250_probe_acpi(struct uart_8250_port *up,
struct dw8250_data *data)
{
+ const struct acpi_device_id *id;
struct uart_port *p = &up->port;
dw8250_setup_port(up);
+ id = acpi_match_device(p->dev->driver->acpi_match_table, p->dev);
+ if (!id)
+ return -ENODEV;
+
+ if (!p->uartclk)
+ if (device_property_read_u32(p->dev, "clock-frequency",
+ &p->uartclk))
+ return -EINVAL;
+
p->iotype = UPIO_MEM32;
p->serial_in = dw8250_serial_in32;
p->serial_out = dw8250_serial_out32;
@@ -577,6 +587,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = {
{ "INT3435", 0 },
{ "80860F0A", 0 },
{ "8086228A", 0 },
+ { "APMC0D08", 0},
{ },
};
MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 4858b8a99d3b..c31a22b4f845 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -93,15 +93,18 @@ static void __init early_serial8250_write(struct console *console,
struct uart_port *port = &early_device->port;
unsigned int ier;
- /* Save the IER and disable interrupts */
+ /* Save the IER and disable interrupts preserving the UUE bit */
ier = serial8250_early_in(port, UART_IER);
- serial8250_early_out(port, UART_IER, 0);
+ if (ier)
+ serial8250_early_out(port, UART_IER, ier & UART_IER_UUE);
uart_console_write(port, s, count, serial_putc);
/* Wait for transmitter to become empty and restore the IER */
wait_for_xmitr(port);
- serial8250_early_out(port, UART_IER, ier);
+
+ if (ier)
+ serial8250_early_out(port, UART_IER, ier);
}
static unsigned int __init probe_baud(struct uart_port *port)
@@ -124,9 +127,11 @@ static void __init init_port(struct earlycon_device *device)
struct uart_port *port = &device->port;
unsigned int divisor;
unsigned char c;
+ unsigned int ier;
serial8250_early_out(port, UART_LCR, 0x3); /* 8n1 */
- serial8250_early_out(port, UART_IER, 0); /* no interrupt */
+ ier = serial8250_early_in(port, UART_IER);
+ serial8250_early_out(port, UART_IER, ier & UART_IER_UUE); /* no interrupt */
serial8250_early_out(port, UART_FCR, 0); /* no fifo */
serial8250_early_out(port, UART_MCR, 0x3); /* DTR + RTS */
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 96b69bfd773f..fe6d2e51da09 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -106,6 +106,28 @@ static u32 uart_read(struct uart_8250_port *up, u32 reg)
return readl(up->port.membase + (reg << up->port.regshift));
}
+static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ struct omap8250_priv *priv = up->port.private_data;
+ u8 lcr;
+
+ serial8250_do_set_mctrl(port, mctrl);
+
+ /*
+ * Turn off autoRTS if RTS is lowered and restore autoRTS setting
+ * if RTS is raised
+ */
+ lcr = serial_in(up, UART_LCR);
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+ if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
+ priv->efr |= UART_EFR_RTS;
+ else
+ priv->efr &= ~UART_EFR_RTS;
+ serial_out(up, UART_EFR, priv->efr);
+ serial_out(up, UART_LCR, lcr);
+}
+
/*
* Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460)
* The access to uart register after MDR1 Access
@@ -397,12 +419,12 @@ static void omap_8250_set_termios(struct uart_port *port,
priv->efr = 0;
up->mcr &= ~(UART_MCR_RTS | UART_MCR_XONANY);
- if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) {
- /* Enable AUTORTS and AUTOCTS */
- priv->efr |= UART_EFR_CTS | UART_EFR_RTS;
+ up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF);
- /* Ensure MCR RTS is asserted */
- up->mcr |= UART_MCR_RTS;
+ if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) {
+ /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */
+ up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
+ priv->efr |= UART_EFR_CTS;
} else if (up->port.flags & UPF_SOFT_FLOW) {
/*
* IXON Flag:
@@ -417,8 +439,10 @@ static void omap_8250_set_termios(struct uart_port *port,
* Enable XON/XOFF flow control on output.
* Transmit XON1, XOFF1
*/
- if (termios->c_iflag & IXOFF)
+ if (termios->c_iflag & IXOFF) {
+ up->port.status |= UPSTAT_AUTOXOFF;
priv->efr |= OMAP_UART_SW_TX;
+ }
/*
* IXANY Flag:
@@ -450,18 +474,18 @@ static void omap_8250_set_termios(struct uart_port *port,
static void omap_8250_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- struct omap8250_priv *priv = up->port.private_data;
+ struct uart_8250_port *up = up_to_u8250p(port);
+ u8 efr;
pm_runtime_get_sync(port->dev);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_out(up, UART_EFR, priv->efr | UART_EFR_ECB);
+ efr = serial_in(up, UART_EFR);
+ serial_out(up, UART_EFR, efr | UART_EFR_ECB);
serial_out(up, UART_LCR, 0);
serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_out(up, UART_EFR, priv->efr);
+ serial_out(up, UART_EFR, efr);
serial_out(up, UART_LCR, 0);
pm_runtime_mark_last_busy(port->dev);
@@ -1007,6 +1031,7 @@ static int omap8250_probe(struct platform_device *pdev)
up.capabilities |= UART_CAP_RPM;
#endif
up.port.set_termios = omap_8250_set_termios;
+ up.port.set_mctrl = omap8250_set_mctrl;
up.port.pm = omap_8250_pm;
up.port.startup = omap_8250_startup;
up.port.shutdown = omap_8250_shutdown;
@@ -1248,6 +1273,46 @@ static int omap8250_runtime_resume(struct device *dev)
}
#endif
+#ifdef CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP
+static int __init omap8250_console_fixup(void)
+{
+ char *omap_str;
+ char *options;
+ u8 idx;
+
+ if (strstr(boot_command_line, "console=ttyS"))
+ /* user set a ttyS based name for the console */
+ return 0;
+
+ omap_str = strstr(boot_command_line, "console=ttyO");
+ if (!omap_str)
+ /* user did not set ttyO based console, so we don't care */
+ return 0;
+
+ omap_str += 12;
+ if ('0' <= *omap_str && *omap_str <= '9')
+ idx = *omap_str - '0';
+ else
+ return 0;
+
+ omap_str++;
+ if (omap_str[0] == ',') {
+ omap_str++;
+ options = omap_str;
+ } else {
+ options = NULL;
+ }
+
+ add_preferred_console("ttyS", idx, options);
+ pr_err("WARNING: Your 'console=ttyO%d' has been replaced by 'ttyS%d'\n",
+ idx, idx);
+ pr_err("This ensures that you still see kernel messages. Please\n");
+ pr_err("update your kernel commandline.\n");
+ return 0;
+}
+console_initcall(omap8250_console_fixup);
+#endif
+
static const struct dev_pm_ops omap8250_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(omap8250_suspend, omap8250_resume)
SET_RUNTIME_PM_OPS(omap8250_runtime_suspend,
@@ -1269,7 +1334,6 @@ static struct platform_driver omap8250_platform_driver = {
.name = "omap8250",
.pm = &omap8250_dev_pm_ops,
.of_match_table = omap8250_dt_ids,
- .owner = THIS_MODULE,
},
.probe = omap8250_probe,
.remove = omap8250_remove,
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index d1f8dc6aabcb..daf2c82984e9 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -221,13 +221,13 @@ pci_hp_diva_setup(struct serial_private *priv,
*/
static int pci_inteli960ni_init(struct pci_dev *dev)
{
- unsigned long oldval;
+ u32 oldval;
if (!(dev->subsystem_device & 0x1000))
return -ENODEV;
/* is firmware started? */
- pci_read_config_dword(dev, 0x44, (void *)&oldval);
+ pci_read_config_dword(dev, 0x44, &oldval);
if (oldval == 0x00001000L) { /* RESET value */
dev_dbg(&dev->dev, "Local i960 firmware missing\n");
return -ENODEV;
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 682a2fbe5c06..50a09cd76d50 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -426,7 +426,7 @@ static int serial_pnp_guess_board(struct pnp_dev *dev)
static int
serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
- struct uart_8250_port uart;
+ struct uart_8250_port uart, *port;
int ret, line, flags = dev_id->driver_data;
if (flags & UNKNOWN_DEV) {
@@ -471,6 +471,10 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
if (line < 0 || (flags & CIR_PORT))
return -ENODEV;
+ port = serial8250_get_port(line);
+ if (uart_console(&port->port))
+ dev->capabilities |= PNP_CONSOLE;
+
pnp_set_drvdata(dev, (void *)((long)line + 1));
return 0;
}
@@ -478,6 +482,8 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
static void serial_pnp_remove(struct pnp_dev *dev)
{
long line = (long)pnp_get_drvdata(dev);
+
+ dev->capabilities &= ~PNP_CONSOLE;
if (line)
serial8250_unregister_port(line - 1);
}
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 0fcbcd29502f..6f7f2d753def 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -308,6 +308,25 @@ config SERIAL_8250_OMAP
This driver uses ttyS instead of ttyO.
+config SERIAL_8250_OMAP_TTYO_FIXUP
+ bool "Replace ttyO with ttyS"
+ depends on SERIAL_8250_OMAP=y && SERIAL_8250_CONSOLE
+ default y
+ help
+ This option replaces the "console=ttyO" argument with the matching
+ ttyS argument if the user did not specified it on the command line.
+ This ensures that the user can see the kernel output during boot
+ which he wouldn't see otherwise. The getty has still to be configured
+ for ttyS instead of ttyO regardless of this option.
+ This option is intended for people who "automatically" enable this
+ driver without knowing that this driver requires a different console=
+ argument. If you read this, please keep this option disabled and
+ instead update your kernel command line. If you prepare a kernel for a
+ distribution or other kind of larger user base then you probably want
+ to keep this option enabled. Otherwise people might complain about a
+ not booting kernel because the serial console remains silent in case
+ they forgot to update the command line.
+
config SERIAL_8250_FINTEK
tristate "Support for Fintek F81216A LPC to 4 UART"
depends on SERIAL_8250 && PNP
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index c79b43cd6014..5d916c7a216b 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -241,6 +241,7 @@ config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
depends on PLAT_SAMSUNG || ARCH_EXYNOS
select SERIAL_CORE
+ select SERIAL_EARLYCON
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
providing /dev/ttySAC0, 1 and 2 (note, some machines may not
@@ -482,16 +483,6 @@ config SERIAL_SA1100_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
-config SERIAL_MRST_MAX3110
- tristate "SPI UART driver for Max3110"
- depends on SPI_DW_PCI
- select SERIAL_CORE
- select SERIAL_CORE_CONSOLE
- help
- This is the UART protocol driver for the MAX3110 device on
- the Intel Moorestown platform. On other systems use the max3100
- driver.
-
config SERIAL_MFD_HSU
tristate "Medfield High Speed UART support"
depends on PCI
@@ -1094,6 +1085,16 @@ config SERIAL_VT8500_CONSOLE
depends on SERIAL_VT8500=y
select SERIAL_CORE_CONSOLE
+config SERIAL_ETRAXFS
+ bool "ETRAX FS serial port support"
+ depends on ETRAX_ARCH_V32 && OF
+ select SERIAL_CORE
+
+config SERIAL_ETRAXFS_CONSOLE
+ bool "ETRAX FS serial console support"
+ depends on SERIAL_ETRAXFS
+ select SERIAL_CORE_CONSOLE
+
config SERIAL_NETX
tristate "NetX serial port support"
depends on ARCH_NETX
@@ -1549,6 +1550,21 @@ config SERIAL_FSL_LPUART_CONSOLE
If you have enabled the lpuart serial port on the Freescale SoCs,
you can make it the console by answering Y to this option.
+config SERIAL_CONEXANT_DIGICOLOR
+ tristate "Conexant Digicolor CX92xxx USART serial port support"
+ depends on OF
+ select SERIAL_CORE
+ help
+ Support for the on-chip USART on Conexant Digicolor SoCs.
+
+config SERIAL_CONEXANT_DIGICOLOR_CONSOLE
+ bool "Console on Conexant Digicolor serial port"
+ depends on SERIAL_CONEXANT_DIGICOLOR=y
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have enabled the USART serial port on Conexant Digicolor
+ SoCs, you can make it the console by answering Y to this option.
+
config SERIAL_ST_ASC
tristate "ST ASC serial port support"
select SERIAL_CORE
@@ -1577,6 +1593,24 @@ config SERIAL_MEN_Z135
This driver can also be build as a module. If so, the module will be called
men_z135_uart.ko
+config SERIAL_SPRD
+ tristate "Support for Spreadtrum serial"
+ depends on ARCH_SPRD
+ select SERIAL_CORE
+ help
+ This enables the driver for the Spreadtrum's serial.
+
+config SERIAL_SPRD_CONSOLE
+ bool "Spreadtrum UART console support"
+ depends on SERIAL_SPRD=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Support for early debug console using Spreadtrum's serial. This enables
+ the console before standard serial driver is probed. This is enabled
+ with "earlycon" on the kernel command line. The console is
+ enabled when early_param is processed.
+
endmenu
config SERIAL_MCTRL_GPIO
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 9a548acf5fdc..599be4b05a26 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_SERIAL_MPSC) += mpsc.o
obj-$(CONFIG_SERIAL_MESON) += meson_uart.o
obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
+obj-$(CONFIG_SERIAL_ETRAXFS) += etraxfs-uart.o
obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o
obj-$(CONFIG_SERIAL_SC16IS7XX) += sc16is7xx.o
obj-$(CONFIG_SERIAL_JSM) += jsm/
@@ -77,7 +78,6 @@ obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o
-obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o
obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o
obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o
obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
@@ -92,7 +92,9 @@ obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
obj-$(CONFIG_SERIAL_ARC) += arc_uart.o
obj-$(CONFIG_SERIAL_RP2) += rp2.o
obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o
+obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR) += digicolor-usart.o
obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o
+obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
# GPIOLIB helpers for modem control lines
obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index 192d0435bb86..0fefdd8931a2 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -441,6 +441,7 @@ static int altera_jtaguart_probe(struct platform_device *pdev)
port->iotype = SERIAL_IO_MEM;
port->ops = &altera_jtaguart_ops;
port->flags = UPF_BOOT_AUTOCONF;
+ port->dev = &pdev->dev;
uart_add_one_port(&altera_jtaguart_driver, port);
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index eb15a50623cb..b2859fe07e14 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -589,6 +589,7 @@ static int altera_uart_probe(struct platform_device *pdev)
port->iotype = SERIAL_IO_MEM;
port->ops = &altera_uart_ops;
port->flags = UPF_BOOT_AUTOCONF;
+ port->dev = &pdev->dev;
platform_set_drvdata(pdev, port);
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 4d848a29e223..846552bff67d 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -341,13 +341,37 @@ static u_int atmel_tx_empty(struct uart_port *port)
static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
{
unsigned int control = 0;
- unsigned int mode;
+ unsigned int mode = UART_GET_MR(port);
+ unsigned int rts_paused, rts_ready;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ /* override mode to RS485 if needed, otherwise keep the current mode */
+ if (port->rs485.flags & SER_RS485_ENABLED) {
+ if ((port->rs485.delay_rts_after_send) > 0)
+ UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
+ mode &= ~ATMEL_US_USMODE;
+ mode |= ATMEL_US_USMODE_RS485;
+ }
+
+ /* set the RTS line state according to the mode */
+ if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) {
+ /* force RTS line to high level */
+ rts_paused = ATMEL_US_RTSEN;
+
+ /* give the control of the RTS line back to the hardware */
+ rts_ready = ATMEL_US_RTSDIS;
+ } else {
+ /* force RTS line to high level */
+ rts_paused = ATMEL_US_RTSDIS;
+
+ /* force RTS line to low level */
+ rts_ready = ATMEL_US_RTSEN;
+ }
+
if (mctrl & TIOCM_RTS)
- control |= ATMEL_US_RTSEN;
+ control |= rts_ready;
else
- control |= ATMEL_US_RTSDIS;
+ control |= rts_paused;
if (mctrl & TIOCM_DTR)
control |= ATMEL_US_DTREN;
@@ -359,23 +383,12 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
mctrl_gpio_set(atmel_port->gpios, mctrl);
/* Local loopback mode? */
- mode = UART_GET_MR(port) & ~ATMEL_US_CHMODE;
+ mode &= ~ATMEL_US_CHMODE;
if (mctrl & TIOCM_LOOP)
mode |= ATMEL_US_CHMODE_LOC_LOOP;
else
mode |= ATMEL_US_CHMODE_NORMAL;
- /* Resetting serial mode to RS232 (0x0) */
- mode &= ~ATMEL_US_USMODE;
-
- if (port->rs485.flags & SER_RS485_ENABLED) {
- dev_dbg(port->dev, "Setting UART to RS485\n");
- if ((port->rs485.delay_rts_after_send) > 0)
- UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
- mode |= ATMEL_US_USMODE_RS485;
- } else {
- dev_dbg(port->dev, "Setting UART to RS232\n");
- }
UART_PUT_MR(port, mode);
}
@@ -725,7 +738,11 @@ static void atmel_complete_tx_dma(void *arg)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
- /* Do we really need this? */
+ /*
+ * xmit is a circular buffer so, if we have just send data from
+ * xmit->tail to the end of xmit->buf, now we have to transmit the
+ * remaining data from the beginning of xmit->buf to xmit->head.
+ */
if (!uart_circ_empty(xmit))
tasklet_schedule(&atmel_port->tasklet);
@@ -784,17 +801,17 @@ static void atmel_tx_dma(struct uart_port *port)
BUG_ON(!sg_dma_len(sg));
desc = dmaengine_prep_slave_sg(chan,
- sg,
- 1,
- DMA_MEM_TO_DEV,
- DMA_PREP_INTERRUPT |
- DMA_CTRL_ACK);
+ sg,
+ 1,
+ DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
if (!desc) {
dev_err(port->dev, "Failed to send via dma!\n");
return;
}
- dma_sync_sg_for_device(port->dev, sg, 1, DMA_MEM_TO_DEV);
+ dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
atmel_port->desc_tx = desc;
desc->callback = atmel_complete_tx_dma;
@@ -927,7 +944,7 @@ static void atmel_rx_from_dma(struct uart_port *port)
dma_sync_sg_for_cpu(port->dev,
&atmel_port->sg_rx,
1,
- DMA_DEV_TO_MEM);
+ DMA_FROM_DEVICE);
/*
* ring->head points to the end of data already written by the DMA.
@@ -974,7 +991,7 @@ static void atmel_rx_from_dma(struct uart_port *port)
dma_sync_sg_for_device(port->dev,
&atmel_port->sg_rx,
1,
- DMA_DEV_TO_MEM);
+ DMA_FROM_DEVICE);
/*
* Drop the lock here since it might end up calling
@@ -1012,13 +1029,13 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
/* UART circular rx buffer is an aligned page. */
BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
sg_set_page(&atmel_port->sg_rx,
- virt_to_page(ring->buf),
- ATMEL_SERIAL_RINGSIZE,
- (int)ring->buf & ~PAGE_MASK);
- nent = dma_map_sg(port->dev,
- &atmel_port->sg_rx,
- 1,
- DMA_FROM_DEVICE);
+ virt_to_page(ring->buf),
+ ATMEL_SERIAL_RINGSIZE,
+ (int)ring->buf & ~PAGE_MASK);
+ nent = dma_map_sg(port->dev,
+ &atmel_port->sg_rx,
+ 1,
+ DMA_FROM_DEVICE);
if (!nent) {
dev_dbg(port->dev, "need to release resource of dma\n");
@@ -1047,11 +1064,11 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
* each one is half ring buffer size
*/
desc = dmaengine_prep_dma_cyclic(atmel_port->chan_rx,
- sg_dma_address(&atmel_port->sg_rx),
- sg_dma_len(&atmel_port->sg_rx),
- sg_dma_len(&atmel_port->sg_rx)/2,
- DMA_DEV_TO_MEM,
- DMA_PREP_INTERRUPT);
+ sg_dma_address(&atmel_port->sg_rx),
+ sg_dma_len(&atmel_port->sg_rx),
+ sg_dma_len(&atmel_port->sg_rx)/2,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT);
desc->callback = atmel_complete_rx_dma;
desc->callback_param = port;
atmel_port->desc_rx = desc;
@@ -1921,12 +1938,14 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
unsigned long flags;
- unsigned int mode, imr, quot, baud;
+ unsigned int old_mode, mode, imr, quot, baud;
- /* Get current mode register */
- mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL
- | ATMEL_US_NBSTOP | ATMEL_US_PAR
- | ATMEL_US_USMODE);
+ /* save the current mode register */
+ mode = old_mode = UART_GET_MR(port);
+
+ /* reset the mode, clock divisor, parity, stop bits and data size */
+ mode &= ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP |
+ ATMEL_US_PAR | ATMEL_US_USMODE);
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
quot = uart_get_divisor(port, baud);
@@ -1971,12 +1990,6 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
} else
mode |= ATMEL_US_PAR_NONE;
- /* hardware handshake (RTS/CTS) */
- if (termios->c_cflag & CRTSCTS)
- mode |= ATMEL_US_USMODE_HWHS;
- else
- mode |= ATMEL_US_USMODE_NORMAL;
-
spin_lock_irqsave(&port->lock, flags);
port->read_status_mask = ATMEL_US_OVRE;
@@ -2020,18 +2033,40 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
/* disable receiver and transmitter */
UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
- /* Resetting serial mode to RS232 (0x0) */
- mode &= ~ATMEL_US_USMODE;
-
+ /* mode */
if (port->rs485.flags & SER_RS485_ENABLED) {
if ((port->rs485.delay_rts_after_send) > 0)
UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
+ } else if (termios->c_cflag & CRTSCTS) {
+ /* RS232 with hardware handshake (RTS/CTS) */
+ mode |= ATMEL_US_USMODE_HWHS;
+ } else {
+ /* RS232 without hadware handshake */
+ mode |= ATMEL_US_USMODE_NORMAL;
}
- /* set the parity, stop bits and data size */
+ /* set the mode, clock divisor, parity, stop bits and data size */
UART_PUT_MR(port, mode);
+ /*
+ * when switching the mode, set the RTS line state according to the
+ * new mode, otherwise keep the former state
+ */
+ if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) {
+ unsigned int rts_state;
+
+ if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) {
+ /* let the hardware control the RTS line */
+ rts_state = ATMEL_US_RTSDIS;
+ } else {
+ /* force RTS line to low level */
+ rts_state = ATMEL_US_RTSEN;
+ }
+
+ UART_PUT_CR(port, rts_state);
+ }
+
/* set the baud rate */
UART_PUT_BRGR(port, quot);
UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
@@ -2565,7 +2600,7 @@ static int atmel_serial_probe(struct platform_device *pdev)
ret = atmel_init_port(port, pdev);
if (ret)
- goto err;
+ goto err_clear_bit;
if (!atmel_use_pdc_rx(&port->uart)) {
ret = -ENOMEM;
@@ -2596,6 +2631,12 @@ static int atmel_serial_probe(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 1);
platform_set_drvdata(pdev, port);
+ /*
+ * The peripheral clock has been disabled by atmel_init_port():
+ * enable it before accessing I/O registers
+ */
+ clk_prepare_enable(port->clk);
+
if (rs485_enabled) {
UART_PUT_MR(&port->uart, ATMEL_US_USMODE_NORMAL);
UART_PUT_CR(&port->uart, ATMEL_US_RTSEN);
@@ -2606,6 +2647,12 @@ static int atmel_serial_probe(struct platform_device *pdev)
*/
atmel_get_ip_name(&port->uart);
+ /*
+ * The peripheral clock can now safely be disabled till the port
+ * is used
+ */
+ clk_disable_unprepare(port->clk);
+
return 0;
err_add_port:
@@ -2616,6 +2663,8 @@ err_alloc_ring:
clk_put(port->clk);
port->clk = NULL;
}
+err_clear_bit:
+ clear_bit(port->uart.line, atmel_ports_in_use);
err:
return ret;
}
diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c
new file mode 100644
index 000000000000..a80cdad114f3
--- /dev/null
+++ b/drivers/tty/serial/digicolor-usart.c
@@ -0,0 +1,560 @@
+/*
+ * Driver for Conexant Digicolor serial ports (USART)
+ *
+ * Author: Baruch Siach <baruch@tkos.co.il>
+ *
+ * Copyright (C) 2014 Paradox Innovation Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+#define UA_ENABLE 0x00
+#define UA_ENABLE_ENABLE BIT(0)
+
+#define UA_CONTROL 0x01
+#define UA_CONTROL_RX_ENABLE BIT(0)
+#define UA_CONTROL_TX_ENABLE BIT(1)
+#define UA_CONTROL_SOFT_RESET BIT(2)
+
+#define UA_STATUS 0x02
+#define UA_STATUS_PARITY_ERR BIT(0)
+#define UA_STATUS_FRAME_ERR BIT(1)
+#define UA_STATUS_OVERRUN_ERR BIT(2)
+#define UA_STATUS_TX_READY BIT(6)
+
+#define UA_CONFIG 0x03
+#define UA_CONFIG_CHAR_LEN BIT(0)
+#define UA_CONFIG_STOP_BITS BIT(1)
+#define UA_CONFIG_PARITY BIT(2)
+#define UA_CONFIG_ODD_PARITY BIT(4)
+
+#define UA_EMI_REC 0x04
+
+#define UA_HBAUD_LO 0x08
+#define UA_HBAUD_HI 0x09
+
+#define UA_STATUS_FIFO 0x0a
+#define UA_STATUS_FIFO_RX_EMPTY BIT(2)
+#define UA_STATUS_FIFO_RX_INT_ALMOST BIT(3)
+#define UA_STATUS_FIFO_TX_FULL BIT(4)
+#define UA_STATUS_FIFO_TX_INT_ALMOST BIT(7)
+
+#define UA_CONFIG_FIFO 0x0b
+#define UA_CONFIG_FIFO_RX_THRESH 7
+#define UA_CONFIG_FIFO_RX_FIFO_MODE BIT(3)
+#define UA_CONFIG_FIFO_TX_FIFO_MODE BIT(7)
+
+#define UA_INTFLAG_CLEAR 0x1c
+#define UA_INTFLAG_SET 0x1d
+#define UA_INT_ENABLE 0x1e
+#define UA_INT_STATUS 0x1f
+
+#define UA_INT_TX BIT(0)
+#define UA_INT_RX BIT(1)
+
+#define DIGICOLOR_USART_NR 3
+
+/*
+ * We use the 16 bytes hardware FIFO to buffer Rx traffic. Rx interrupt is
+ * only produced when the FIFO is filled more than a certain configurable
+ * threshold. Unfortunately, there is no way to set this threshold below half
+ * FIFO. This means that we must periodically poll the FIFO status register to
+ * see whether there are waiting Rx bytes.
+ */
+
+struct digicolor_port {
+ struct uart_port port;
+ struct delayed_work rx_poll_work;
+};
+
+static struct uart_port *digicolor_ports[DIGICOLOR_USART_NR];
+
+static bool digicolor_uart_tx_full(struct uart_port *port)
+{
+ return !!(readb_relaxed(port->membase + UA_STATUS_FIFO) &
+ UA_STATUS_FIFO_TX_FULL);
+}
+
+static bool digicolor_uart_rx_empty(struct uart_port *port)
+{
+ return !!(readb_relaxed(port->membase + UA_STATUS_FIFO) &
+ UA_STATUS_FIFO_RX_EMPTY);
+}
+
+static void digicolor_uart_stop_tx(struct uart_port *port)
+{
+ u8 int_enable = readb_relaxed(port->membase + UA_INT_ENABLE);
+
+ int_enable &= ~UA_INT_TX;
+ writeb_relaxed(int_enable, port->membase + UA_INT_ENABLE);
+}
+
+static void digicolor_uart_start_tx(struct uart_port *port)
+{
+ u8 int_enable = readb_relaxed(port->membase + UA_INT_ENABLE);
+
+ int_enable |= UA_INT_TX;
+ writeb_relaxed(int_enable, port->membase + UA_INT_ENABLE);
+}
+
+static void digicolor_uart_stop_rx(struct uart_port *port)
+{
+ u8 int_enable = readb_relaxed(port->membase + UA_INT_ENABLE);
+
+ int_enable &= ~UA_INT_RX;
+ writeb_relaxed(int_enable, port->membase + UA_INT_ENABLE);
+}
+
+static void digicolor_rx_poll(struct work_struct *work)
+{
+ struct digicolor_port *dp =
+ container_of(to_delayed_work(work),
+ struct digicolor_port, rx_poll_work);
+
+ if (!digicolor_uart_rx_empty(&dp->port))
+ /* force RX interrupt */
+ writeb_relaxed(UA_INT_RX, dp->port.membase + UA_INTFLAG_SET);
+
+ schedule_delayed_work(&dp->rx_poll_work, msecs_to_jiffies(100));
+}
+
+static void digicolor_uart_rx(struct uart_port *port)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ while (1) {
+ u8 status, ch;
+ unsigned int ch_flag;
+
+ if (digicolor_uart_rx_empty(port))
+ break;
+
+ ch = readb_relaxed(port->membase + UA_EMI_REC);
+ status = readb_relaxed(port->membase + UA_STATUS);
+
+ port->icount.rx++;
+ ch_flag = TTY_NORMAL;
+
+ if (status) {
+ if (status & UA_STATUS_PARITY_ERR)
+ port->icount.parity++;
+ else if (status & UA_STATUS_FRAME_ERR)
+ port->icount.frame++;
+ else if (status & UA_STATUS_OVERRUN_ERR)
+ port->icount.overrun++;
+
+ status &= port->read_status_mask;
+
+ if (status & UA_STATUS_PARITY_ERR)
+ ch_flag = TTY_PARITY;
+ else if (status & UA_STATUS_FRAME_ERR)
+ ch_flag = TTY_FRAME;
+ else if (status & UA_STATUS_OVERRUN_ERR)
+ ch_flag = TTY_OVERRUN;
+ }
+
+ if (status & port->ignore_status_mask)
+ continue;
+
+ uart_insert_char(port, status, UA_STATUS_OVERRUN_ERR, ch,
+ ch_flag);
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ tty_flip_buffer_push(&port->state->port);
+}
+
+static void digicolor_uart_tx(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned long flags;
+
+ if (digicolor_uart_tx_full(port))
+ return;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ if (port->x_char) {
+ writeb_relaxed(port->x_char, port->membase + UA_EMI_REC);
+ port->icount.tx++;
+ port->x_char = 0;
+ goto out;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ digicolor_uart_stop_tx(port);
+ goto out;
+ }
+
+ while (!uart_circ_empty(xmit)) {
+ writeb(xmit->buf[xmit->tail], port->membase + UA_EMI_REC);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+
+ if (digicolor_uart_tx_full(port))
+ break;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+out:
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static irqreturn_t digicolor_uart_int(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ u8 int_status = readb_relaxed(port->membase + UA_INT_STATUS);
+
+ writeb_relaxed(UA_INT_RX | UA_INT_TX,
+ port->membase + UA_INTFLAG_CLEAR);
+
+ if (int_status & UA_INT_RX)
+ digicolor_uart_rx(port);
+ if (int_status & UA_INT_TX)
+ digicolor_uart_tx(port);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int digicolor_uart_tx_empty(struct uart_port *port)
+{
+ u8 status = readb_relaxed(port->membase + UA_STATUS);
+
+ return (status & UA_STATUS_TX_READY) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int digicolor_uart_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CTS;
+}
+
+static void digicolor_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static void digicolor_uart_break_ctl(struct uart_port *port, int state)
+{
+}
+
+static int digicolor_uart_startup(struct uart_port *port)
+{
+ struct digicolor_port *dp =
+ container_of(port, struct digicolor_port, port);
+
+ writeb_relaxed(UA_ENABLE_ENABLE, port->membase + UA_ENABLE);
+ writeb_relaxed(UA_CONTROL_SOFT_RESET, port->membase + UA_CONTROL);
+ writeb_relaxed(0, port->membase + UA_CONTROL);
+
+ writeb_relaxed(UA_CONFIG_FIFO_RX_FIFO_MODE
+ | UA_CONFIG_FIFO_TX_FIFO_MODE | UA_CONFIG_FIFO_RX_THRESH,
+ port->membase + UA_CONFIG_FIFO);
+ writeb_relaxed(UA_STATUS_FIFO_RX_INT_ALMOST,
+ port->membase + UA_STATUS_FIFO);
+ writeb_relaxed(UA_CONTROL_RX_ENABLE | UA_CONTROL_TX_ENABLE,
+ port->membase + UA_CONTROL);
+ writeb_relaxed(UA_INT_TX | UA_INT_RX,
+ port->membase + UA_INT_ENABLE);
+
+ schedule_delayed_work(&dp->rx_poll_work, msecs_to_jiffies(100));
+
+ return 0;
+}
+
+static void digicolor_uart_shutdown(struct uart_port *port)
+{
+ struct digicolor_port *dp =
+ container_of(port, struct digicolor_port, port);
+
+ writeb_relaxed(0, port->membase + UA_ENABLE);
+ cancel_delayed_work_sync(&dp->rx_poll_work);
+}
+
+static void digicolor_uart_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned int baud, divisor;
+ u8 config = 0;
+ unsigned long flags;
+
+ /* Mask termios capabilities we don't support */
+ termios->c_cflag &= ~CMSPAR;
+ termios->c_iflag &= ~(BRKINT | IGNBRK);
+
+ /* Limit baud rates so that we don't need the fractional divider */
+ baud = uart_get_baud_rate(port, termios, old,
+ port->uartclk / (0x10000*16),
+ port->uartclk / 256);
+ divisor = uart_get_divisor(port, baud) - 1;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS7:
+ break;
+ case CS8:
+ default:
+ config |= UA_CONFIG_CHAR_LEN;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ config |= UA_CONFIG_STOP_BITS;
+
+ if (termios->c_cflag & PARENB) {
+ config |= UA_CONFIG_PARITY;
+ if (termios->c_cflag & PARODD)
+ config |= UA_CONFIG_ODD_PARITY;
+ }
+
+ /* Set read status mask */
+ port->read_status_mask = UA_STATUS_OVERRUN_ERR;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= UA_STATUS_PARITY_ERR
+ | UA_STATUS_FRAME_ERR;
+
+ /* Set status ignore mask */
+ port->ignore_status_mask = 0;
+ if (!(termios->c_cflag & CREAD))
+ port->ignore_status_mask |= UA_STATUS_OVERRUN_ERR
+ | UA_STATUS_PARITY_ERR | UA_STATUS_FRAME_ERR;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ writeb_relaxed(config, port->membase + UA_CONFIG);
+ writeb_relaxed(divisor & 0xff, port->membase + UA_HBAUD_LO);
+ writeb_relaxed(divisor >> 8, port->membase + UA_HBAUD_HI);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *digicolor_uart_type(struct uart_port *port)
+{
+ return (port->type == PORT_DIGICOLOR) ? "DIGICOLOR USART" : NULL;
+}
+
+static void digicolor_uart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_DIGICOLOR;
+}
+
+static void digicolor_uart_release_port(struct uart_port *port)
+{
+}
+
+static int digicolor_uart_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static const struct uart_ops digicolor_uart_ops = {
+ .tx_empty = digicolor_uart_tx_empty,
+ .set_mctrl = digicolor_uart_set_mctrl,
+ .get_mctrl = digicolor_uart_get_mctrl,
+ .stop_tx = digicolor_uart_stop_tx,
+ .start_tx = digicolor_uart_start_tx,
+ .stop_rx = digicolor_uart_stop_rx,
+ .break_ctl = digicolor_uart_break_ctl,
+ .startup = digicolor_uart_startup,
+ .shutdown = digicolor_uart_shutdown,
+ .set_termios = digicolor_uart_set_termios,
+ .type = digicolor_uart_type,
+ .config_port = digicolor_uart_config_port,
+ .release_port = digicolor_uart_release_port,
+ .request_port = digicolor_uart_request_port,
+};
+
+static void digicolor_uart_console_putchar(struct uart_port *port, int ch)
+{
+ while (digicolor_uart_tx_full(port))
+ cpu_relax();
+
+ writeb_relaxed(ch, port->membase + UA_EMI_REC);
+}
+
+static void digicolor_uart_console_write(struct console *co, const char *c,
+ unsigned n)
+{
+ struct uart_port *port = digicolor_ports[co->index];
+ u8 status;
+ unsigned long flags;
+ int locked = 1;
+
+ if (oops_in_progress)
+ locked = spin_trylock_irqsave(&port->lock, flags);
+ else
+ spin_lock_irqsave(&port->lock, flags);
+
+ uart_console_write(port, c, n, digicolor_uart_console_putchar);
+
+ if (locked)
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /* Wait for transmitter to become empty */
+ do {
+ status = readb_relaxed(port->membase + UA_STATUS);
+ } while ((status & UA_STATUS_TX_READY) == 0);
+}
+
+static int digicolor_uart_console_setup(struct console *co, char *options)
+{
+ int baud = 115200, bits = 8, parity = 'n', flow = 'n';
+ struct uart_port *port;
+
+ if (co->index < 0 || co->index >= DIGICOLOR_USART_NR)
+ return -EINVAL;
+
+ port = digicolor_ports[co->index];
+ if (!port)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct console digicolor_console = {
+ .name = "ttyS",
+ .device = uart_console_device,
+ .write = digicolor_uart_console_write,
+ .setup = digicolor_uart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+static struct uart_driver digicolor_uart = {
+ .driver_name = "digicolor-usart",
+ .dev_name = "ttyS",
+ .nr = DIGICOLOR_USART_NR,
+};
+
+static int digicolor_uart_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret, index;
+ struct digicolor_port *dp;
+ struct resource *res;
+ struct clk *uart_clk;
+
+ if (!np) {
+ dev_err(&pdev->dev, "Missing device tree node\n");
+ return -ENXIO;
+ }
+
+ index = of_alias_get_id(np, "serial");
+ if (index < 0 || index >= DIGICOLOR_USART_NR)
+ return -EINVAL;
+
+ dp = devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
+ if (!dp)
+ return -ENOMEM;
+
+ uart_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(uart_clk))
+ return PTR_ERR(uart_clk);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ dp->port.mapbase = res->start;
+ dp->port.membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(dp->port.membase))
+ return PTR_ERR(dp->port.membase);
+
+ dp->port.irq = platform_get_irq(pdev, 0);
+ if (IS_ERR_VALUE(dp->port.irq))
+ return dp->port.irq;
+
+ dp->port.iotype = UPIO_MEM;
+ dp->port.uartclk = clk_get_rate(uart_clk);
+ dp->port.fifosize = 16;
+ dp->port.dev = &pdev->dev;
+ dp->port.ops = &digicolor_uart_ops;
+ dp->port.line = index;
+ dp->port.type = PORT_DIGICOLOR;
+ spin_lock_init(&dp->port.lock);
+
+ digicolor_ports[index] = &dp->port;
+ platform_set_drvdata(pdev, &dp->port);
+
+ INIT_DELAYED_WORK(&dp->rx_poll_work, digicolor_rx_poll);
+
+ ret = devm_request_irq(&pdev->dev, dp->port.irq, digicolor_uart_int, 0,
+ dev_name(&pdev->dev), &dp->port);
+ if (ret)
+ return ret;
+
+ return uart_add_one_port(&digicolor_uart, &dp->port);
+}
+
+static int digicolor_uart_remove(struct platform_device *pdev)
+{
+ struct uart_port *port = platform_get_drvdata(pdev);
+
+ uart_remove_one_port(&digicolor_uart, port);
+
+ return 0;
+}
+
+static const struct of_device_id digicolor_uart_dt_ids[] = {
+ { .compatible = "cnxt,cx92755-usart", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, digicolor_uart_dt_ids);
+
+static struct platform_driver digicolor_uart_platform = {
+ .driver = {
+ .name = "digicolor-usart",
+ .of_match_table = of_match_ptr(digicolor_uart_dt_ids),
+ },
+ .probe = digicolor_uart_probe,
+ .remove = digicolor_uart_remove,
+};
+
+static int __init digicolor_uart_init(void)
+{
+ int ret;
+
+ if (IS_ENABLED(CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE)) {
+ digicolor_uart.cons = &digicolor_console;
+ digicolor_console.data = &digicolor_uart;
+ }
+
+ ret = uart_register_driver(&digicolor_uart);
+ if (ret)
+ return ret;
+
+ return platform_driver_register(&digicolor_uart_platform);
+}
+module_init(digicolor_uart_init);
+
+static void __exit digicolor_uart_exit(void)
+{
+ platform_driver_unregister(&digicolor_uart_platform);
+ uart_unregister_driver(&digicolor_uart);
+}
+module_exit(digicolor_uart_exit);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Conexant Digicolor USART serial driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/etraxfs-uart.c b/drivers/tty/serial/etraxfs-uart.c
new file mode 100644
index 000000000000..a57301a6fe42
--- /dev/null
+++ b/drivers/tty/serial/etraxfs-uart.c
@@ -0,0 +1,996 @@
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/tty_flip.h>
+#include <linux/of.h>
+#include <linux/gpio.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <hwregs/ser_defs.h>
+
+#define DRV_NAME "etraxfs-uart"
+#define UART_NR CONFIG_ETRAX_SERIAL_PORTS
+
+#define MODIFY_REG(instance, reg, var) \
+ do { \
+ if (REG_RD_INT(ser, instance, reg) != \
+ REG_TYPE_CONV(int, reg_ser_##reg, var)) \
+ REG_WR(ser, instance, reg, var); \
+ } while (0)
+
+struct uart_cris_port {
+ struct uart_port port;
+
+ int initialized;
+ int irq;
+
+ void __iomem *regi_ser;
+
+ struct gpio_desc *dtr_pin;
+ struct gpio_desc *dsr_pin;
+ struct gpio_desc *ri_pin;
+ struct gpio_desc *cd_pin;
+
+ int write_ongoing;
+};
+
+static struct uart_driver etraxfs_uart_driver;
+static struct uart_port *console_port;
+static int console_baud = 115200;
+static struct uart_cris_port *etraxfs_uart_ports[UART_NR];
+
+static void cris_serial_port_init(struct uart_port *port, int line);
+static void etraxfs_uart_stop_rx(struct uart_port *port);
+static inline void etraxfs_uart_start_tx_bottom(struct uart_port *port);
+
+#ifdef CONFIG_SERIAL_ETRAXFS_CONSOLE
+static void
+cris_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_cris_port *up;
+ int i;
+ reg_ser_r_stat_din stat;
+ reg_ser_rw_tr_dma_en tr_dma_en, old;
+
+ up = etraxfs_uart_ports[co->index];
+
+ if (!up)
+ return;
+
+ /* Switch to manual mode. */
+ tr_dma_en = old = REG_RD(ser, up->regi_ser, rw_tr_dma_en);
+ if (tr_dma_en.en == regk_ser_yes) {
+ tr_dma_en.en = regk_ser_no;
+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en);
+ }
+
+ /* Send data. */
+ for (i = 0; i < count; i++) {
+ /* LF -> CRLF */
+ if (s[i] == '\n') {
+ do {
+ stat = REG_RD(ser, up->regi_ser, r_stat_din);
+ } while (!stat.tr_rdy);
+ REG_WR_INT(ser, up->regi_ser, rw_dout, '\r');
+ }
+ /* Wait until transmitter is ready and send. */
+ do {
+ stat = REG_RD(ser, up->regi_ser, r_stat_din);
+ } while (!stat.tr_rdy);
+ REG_WR_INT(ser, up->regi_ser, rw_dout, s[i]);
+ }
+
+ /* Restore mode. */
+ if (tr_dma_en.en != old.en)
+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, old);
+}
+
+static int __init
+cris_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index < 0 || co->index >= UART_NR)
+ co->index = 0;
+ port = &etraxfs_uart_ports[co->index]->port;
+ console_port = port;
+
+ co->flags |= CON_CONSDEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ console_baud = baud;
+ cris_serial_port_init(port, co->index);
+ uart_set_options(port, co, baud, parity, bits, flow);
+
+ return 0;
+}
+
+static struct tty_driver *cris_console_device(struct console *co, int *index)
+{
+ struct uart_driver *p = co->data;
+ *index = co->index;
+ return p->tty_driver;
+}
+
+static struct console cris_console = {
+ .name = "ttyS",
+ .write = cris_console_write,
+ .device = cris_console_device,
+ .setup = cris_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &etraxfs_uart_driver,
+};
+#endif /* CONFIG_SERIAL_ETRAXFS_CONSOLE */
+
+static struct uart_driver etraxfs_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = UART_NR,
+#ifdef CONFIG_SERIAL_ETRAXFS_CONSOLE
+ .cons = &cris_console,
+#endif /* CONFIG_SERIAL_ETRAXFS_CONSOLE */
+};
+
+static inline int crisv32_serial_get_rts(struct uart_cris_port *up)
+{
+ void __iomem *regi_ser = up->regi_ser;
+ /*
+ * Return what the user has controlled rts to or
+ * what the pin is? (if auto_rts is used it differs during tx)
+ */
+ reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din);
+
+ return !(rstat.rts_n == regk_ser_active);
+}
+
+/*
+ * A set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive
+ * 0=0V , 1=3.3V
+ */
+static inline void crisv32_serial_set_rts(struct uart_cris_port *up,
+ int set, int force)
+{
+ void __iomem *regi_ser = up->regi_ser;
+
+ unsigned long flags;
+ reg_ser_rw_rec_ctrl rec_ctrl;
+
+ local_irq_save(flags);
+ rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
+
+ if (set)
+ rec_ctrl.rts_n = regk_ser_active;
+ else
+ rec_ctrl.rts_n = regk_ser_inactive;
+ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
+ local_irq_restore(flags);
+}
+
+static inline int crisv32_serial_get_cts(struct uart_cris_port *up)
+{
+ void __iomem *regi_ser = up->regi_ser;
+ reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din);
+
+ return (rstat.cts_n == regk_ser_active);
+}
+
+/*
+ * Send a single character for XON/XOFF purposes. We do it in this separate
+ * function instead of the alternative support port.x_char, in the ...start_tx
+ * function, so we don't mix up this case with possibly enabling transmission
+ * of queued-up data (in case that's disabled after *receiving* an XOFF or
+ * negative CTS). This function is used for both DMA and non-DMA case; see HW
+ * docs specifically blessing sending characters manually when DMA for
+ * transmission is enabled and running. We may be asked to transmit despite
+ * the transmitter being disabled by a ..._stop_tx call so we need to enable
+ * it temporarily but restore the state afterwards.
+ */
+static void etraxfs_uart_send_xchar(struct uart_port *port, char ch)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ reg_ser_rw_dout dout = { .data = ch };
+ reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes };
+ reg_ser_r_stat_din rstat;
+ reg_ser_rw_tr_ctrl prev_tr_ctrl, tr_ctrl;
+ void __iomem *regi_ser = up->regi_ser;
+ unsigned long flags;
+
+ /*
+ * Wait for tr_rdy in case a character is already being output. Make
+ * sure we have integrity between the register reads and the writes
+ * below, but don't busy-wait with interrupts off and the port lock
+ * taken.
+ */
+ spin_lock_irqsave(&port->lock, flags);
+ do {
+ spin_unlock_irqrestore(&port->lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
+ prev_tr_ctrl = tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
+ rstat = REG_RD(ser, regi_ser, r_stat_din);
+ } while (!rstat.tr_rdy);
+
+ /*
+ * Ack an interrupt if one was just issued for the previous character
+ * that was output. This is required for non-DMA as the interrupt is
+ * used as the only indicator that the transmitter is ready and it
+ * isn't while this x_char is being transmitted.
+ */
+ REG_WR(ser, regi_ser, rw_ack_intr, ack_intr);
+
+ /* Enable the transmitter in case it was disabled. */
+ tr_ctrl.stop = 0;
+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
+
+ /*
+ * Finally, send the blessed character; nothing should stop it now,
+ * except for an xoff-detected state, which we'll handle below.
+ */
+ REG_WR(ser, regi_ser, rw_dout, dout);
+ up->port.icount.tx++;
+
+ /* There might be an xoff state to clear. */
+ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
+
+ /*
+ * Clear any xoff state that *may* have been there to
+ * inhibit transmission of the character.
+ */
+ if (rstat.xoff_detect) {
+ reg_ser_rw_xoff_clr xoff_clr = { .clr = 1 };
+ reg_ser_rw_tr_dma_en tr_dma_en;
+
+ REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr);
+ tr_dma_en = REG_RD(ser, regi_ser, rw_tr_dma_en);
+
+ /*
+ * If we had an xoff state but cleared it, instead sneak in a
+ * disabled state for the transmitter, after the character we
+ * sent. Thus we keep the port disabled, just as if the xoff
+ * state was still in effect (or actually, as if stop_tx had
+ * been called, as we stop DMA too).
+ */
+ prev_tr_ctrl.stop = 1;
+
+ tr_dma_en.en = 0;
+ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en);
+ }
+
+ /* Restore "previous" enabled/disabled state of the transmitter. */
+ REG_WR(ser, regi_ser, rw_tr_ctrl, prev_tr_ctrl);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * Do not spin_lock_irqsave or disable interrupts by other means here; it's
+ * already done by the caller.
+ */
+static void etraxfs_uart_start_tx(struct uart_port *port)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+
+ /* we have already done below if a write is ongoing */
+ if (up->write_ongoing)
+ return;
+
+ /* Signal that write is ongoing */
+ up->write_ongoing = 1;
+
+ etraxfs_uart_start_tx_bottom(port);
+}
+
+static inline void etraxfs_uart_start_tx_bottom(struct uart_port *port)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ void __iomem *regi_ser = up->regi_ser;
+ reg_ser_rw_tr_ctrl tr_ctrl;
+ reg_ser_rw_intr_mask intr_mask;
+
+ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
+ tr_ctrl.stop = regk_ser_no;
+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
+ intr_mask = REG_RD(ser, regi_ser, rw_intr_mask);
+ intr_mask.tr_rdy = regk_ser_yes;
+ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask);
+}
+
+/*
+ * This function handles both the DMA and non-DMA case by ordering the
+ * transmitter to stop of after the current character. We don't need to wait
+ * for any such character to be completely transmitted; we do that where it
+ * matters, like in etraxfs_uart_set_termios. Don't busy-wait here; see
+ * Documentation/serial/driver: this function is called within
+ * spin_lock_irq{,save} and thus separate ones would be disastrous (when SMP).
+ * There's no documented need to set the txd pin to any particular value;
+ * break setting is controlled solely by etraxfs_uart_break_ctl.
+ */
+static void etraxfs_uart_stop_tx(struct uart_port *port)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ void __iomem *regi_ser = up->regi_ser;
+ reg_ser_rw_tr_ctrl tr_ctrl;
+ reg_ser_rw_intr_mask intr_mask;
+ reg_ser_rw_tr_dma_en tr_dma_en = {0};
+ reg_ser_rw_xoff_clr xoff_clr = {0};
+
+ /*
+ * For the non-DMA case, we'd get a tr_rdy interrupt that we're not
+ * interested in as we're not transmitting any characters. For the
+ * DMA case, that interrupt is already turned off, but no reason to
+ * waste code on conditionals here.
+ */
+ intr_mask = REG_RD(ser, regi_ser, rw_intr_mask);
+ intr_mask.tr_rdy = regk_ser_no;
+ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask);
+
+ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
+ tr_ctrl.stop = 1;
+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
+
+ /*
+ * Always clear possible hardware xoff-detected state here, no need to
+ * unnecessary consider mctrl settings and when they change. We clear
+ * it here rather than in start_tx: both functions are called as the
+ * effect of XOFF processing, but start_tx is also called when upper
+ * levels tell the driver that there are more characters to send, so
+ * avoid adding code there.
+ */
+ xoff_clr.clr = 1;
+ REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr);
+
+ /*
+ * Disable transmitter DMA, so that if we're in XON/XOFF, we can send
+ * those single characters without also giving go-ahead for queued up
+ * DMA data.
+ */
+ tr_dma_en.en = 0;
+ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en);
+
+ /*
+ * Make sure that write_ongoing is reset when stopping tx.
+ */
+ up->write_ongoing = 0;
+}
+
+static void etraxfs_uart_stop_rx(struct uart_port *port)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ void __iomem *regi_ser = up->regi_ser;
+ reg_ser_rw_rec_ctrl rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
+
+ rec_ctrl.en = regk_ser_no;
+ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
+}
+
+static void etraxfs_uart_enable_ms(struct uart_port *port)
+{
+}
+
+static void check_modem_status(struct uart_cris_port *up)
+{
+}
+
+static unsigned int etraxfs_uart_tx_empty(struct uart_port *port)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ unsigned long flags;
+ unsigned int ret;
+ reg_ser_r_stat_din rstat = {0};
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
+ ret = rstat.tr_empty ? TIOCSER_TEMT : 0;
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return ret;
+}
+static unsigned int etraxfs_uart_get_mctrl(struct uart_port *port)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ unsigned int ret;
+
+ ret = 0;
+ if (crisv32_serial_get_rts(up))
+ ret |= TIOCM_RTS;
+ /* DTR is active low */
+ if (up->dtr_pin && !gpiod_get_raw_value(up->dtr_pin))
+ ret |= TIOCM_DTR;
+ /* CD is active low */
+ if (up->cd_pin && !gpiod_get_raw_value(up->cd_pin))
+ ret |= TIOCM_CD;
+ /* RI is active low */
+ if (up->ri_pin && !gpiod_get_raw_value(up->ri_pin))
+ ret |= TIOCM_RI;
+ /* DSR is active low */
+ if (up->dsr_pin && !gpiod_get_raw_value(up->dsr_pin))
+ ret |= TIOCM_DSR;
+ if (crisv32_serial_get_cts(up))
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void etraxfs_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+
+ crisv32_serial_set_rts(up, mctrl & TIOCM_RTS ? 1 : 0, 0);
+ /* DTR is active low */
+ if (up->dtr_pin)
+ gpiod_set_raw_value(up->dtr_pin, mctrl & TIOCM_DTR ? 0 : 1);
+ /* RI is active low */
+ if (up->ri_pin)
+ gpiod_set_raw_value(up->ri_pin, mctrl & TIOCM_RNG ? 0 : 1);
+ /* CD is active low */
+ if (up->cd_pin)
+ gpiod_set_raw_value(up->cd_pin, mctrl & TIOCM_CD ? 0 : 1);
+}
+
+static void etraxfs_uart_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ unsigned long flags;
+ reg_ser_rw_tr_ctrl tr_ctrl;
+ reg_ser_rw_tr_dma_en tr_dma_en;
+ reg_ser_rw_intr_mask intr_mask;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ tr_ctrl = REG_RD(ser, up->regi_ser, rw_tr_ctrl);
+ tr_dma_en = REG_RD(ser, up->regi_ser, rw_tr_dma_en);
+ intr_mask = REG_RD(ser, up->regi_ser, rw_intr_mask);
+
+ if (break_state != 0) { /* Send break */
+ /*
+ * We need to disable DMA (if used) or tr_rdy interrupts if no
+ * DMA. No need to make this conditional on use of DMA;
+ * disabling will be a no-op for the other mode.
+ */
+ intr_mask.tr_rdy = regk_ser_no;
+ tr_dma_en.en = 0;
+
+ /*
+ * Stop transmission and set the txd pin to 0 after the
+ * current character. The txd setting will take effect after
+ * any current transmission has completed.
+ */
+ tr_ctrl.stop = 1;
+ tr_ctrl.txd = 0;
+ } else {
+ /* Re-enable the serial interrupt. */
+ intr_mask.tr_rdy = regk_ser_yes;
+
+ tr_ctrl.stop = 0;
+ tr_ctrl.txd = 1;
+ }
+ REG_WR(ser, up->regi_ser, rw_tr_ctrl, tr_ctrl);
+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en);
+ REG_WR(ser, up->regi_ser, rw_intr_mask, intr_mask);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void
+transmit_chars_no_dma(struct uart_cris_port *up)
+{
+ int max_count;
+ struct circ_buf *xmit = &up->port.state->xmit;
+
+ void __iomem *regi_ser = up->regi_ser;
+ reg_ser_r_stat_din rstat;
+ reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes };
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ /* No more to send, so disable the interrupt. */
+ reg_ser_rw_intr_mask intr_mask;
+
+ intr_mask = REG_RD(ser, regi_ser, rw_intr_mask);
+ intr_mask.tr_rdy = 0;
+ intr_mask.tr_empty = 0;
+ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask);
+ up->write_ongoing = 0;
+ return;
+ }
+
+ /* If the serport is fast, we send up to max_count bytes before
+ exiting the loop. */
+ max_count = 64;
+ do {
+ reg_ser_rw_dout dout = { .data = xmit->buf[xmit->tail] };
+
+ REG_WR(ser, regi_ser, rw_dout, dout);
+ REG_WR(ser, regi_ser, rw_ack_intr, ack_intr);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
+ up->port.icount.tx++;
+ if (xmit->head == xmit->tail)
+ break;
+ rstat = REG_RD(ser, regi_ser, r_stat_din);
+ } while ((--max_count > 0) && rstat.tr_rdy);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+}
+
+static void receive_chars_no_dma(struct uart_cris_port *up)
+{
+ reg_ser_rs_stat_din stat_din;
+ reg_ser_r_stat_din rstat;
+ struct tty_port *port;
+ struct uart_icount *icount;
+ int max_count = 16;
+ char flag;
+ reg_ser_rw_ack_intr ack_intr = { 0 };
+
+ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
+ icount = &up->port.icount;
+ port = &up->port.state->port;
+
+ do {
+ stat_din = REG_RD(ser, up->regi_ser, rs_stat_din);
+
+ flag = TTY_NORMAL;
+ ack_intr.dav = 1;
+ REG_WR(ser, up->regi_ser, rw_ack_intr, ack_intr);
+ icount->rx++;
+
+ if (stat_din.framing_err | stat_din.par_err | stat_din.orun) {
+ if (stat_din.data == 0x00 &&
+ stat_din.framing_err) {
+ /* Most likely a break. */
+ flag = TTY_BREAK;
+ icount->brk++;
+ } else if (stat_din.par_err) {
+ flag = TTY_PARITY;
+ icount->parity++;
+ } else if (stat_din.orun) {
+ flag = TTY_OVERRUN;
+ icount->overrun++;
+ } else if (stat_din.framing_err) {
+ flag = TTY_FRAME;
+ icount->frame++;
+ }
+ }
+
+ /*
+ * If this becomes important, we probably *could* handle this
+ * gracefully by keeping track of the unhandled character.
+ */
+ if (!tty_insert_flip_char(port, stat_din.data, flag))
+ panic("%s: No tty buffer space", __func__);
+ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
+ } while (rstat.dav && (max_count-- > 0));
+ spin_unlock(&up->port.lock);
+ tty_flip_buffer_push(port);
+ spin_lock(&up->port.lock);
+}
+
+static irqreturn_t
+ser_interrupt(int irq, void *dev_id)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)dev_id;
+ void __iomem *regi_ser;
+ int handled = 0;
+
+ spin_lock(&up->port.lock);
+
+ regi_ser = up->regi_ser;
+
+ if (regi_ser) {
+ reg_ser_r_masked_intr masked_intr;
+
+ masked_intr = REG_RD(ser, regi_ser, r_masked_intr);
+ /*
+ * Check what interrupts are active before taking
+ * actions. If DMA is used the interrupt shouldn't
+ * be enabled.
+ */
+ if (masked_intr.dav) {
+ receive_chars_no_dma(up);
+ handled = 1;
+ }
+ check_modem_status(up);
+
+ if (masked_intr.tr_rdy) {
+ transmit_chars_no_dma(up);
+ handled = 1;
+ }
+ }
+ spin_unlock(&up->port.lock);
+ return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+static int etraxfs_uart_get_poll_char(struct uart_port *port)
+{
+ reg_ser_rs_stat_din stat;
+ reg_ser_rw_ack_intr ack_intr = { 0 };
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+
+ do {
+ stat = REG_RD(ser, up->regi_ser, rs_stat_din);
+ } while (!stat.dav);
+
+ /* Ack the data_avail interrupt. */
+ ack_intr.dav = 1;
+ REG_WR(ser, up->regi_ser, rw_ack_intr, ack_intr);
+
+ return stat.data;
+}
+
+static void etraxfs_uart_put_poll_char(struct uart_port *port,
+ unsigned char c)
+{
+ reg_ser_r_stat_din stat;
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+
+ do {
+ stat = REG_RD(ser, up->regi_ser, r_stat_din);
+ } while (!stat.tr_rdy);
+ REG_WR_INT(ser, up->regi_ser, rw_dout, c);
+}
+#endif /* CONFIG_CONSOLE_POLL */
+
+static int etraxfs_uart_startup(struct uart_port *port)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ unsigned long flags;
+ reg_ser_rw_intr_mask ser_intr_mask = {0};
+
+ ser_intr_mask.dav = regk_ser_yes;
+
+ if (request_irq(etraxfs_uart_ports[port->line]->irq, ser_interrupt,
+ 0, DRV_NAME, etraxfs_uart_ports[port->line]))
+ panic("irq ser%d", port->line);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ REG_WR(ser, up->regi_ser, rw_intr_mask, ser_intr_mask);
+
+ etraxfs_uart_set_mctrl(&up->port, up->port.mctrl);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return 0;
+}
+
+static void etraxfs_uart_shutdown(struct uart_port *port)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ etraxfs_uart_stop_tx(port);
+ etraxfs_uart_stop_rx(port);
+
+ free_irq(etraxfs_uart_ports[port->line]->irq,
+ etraxfs_uart_ports[port->line]);
+
+ etraxfs_uart_set_mctrl(&up->port, up->port.mctrl);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+}
+
+static void
+etraxfs_uart_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ unsigned long flags;
+ reg_ser_rw_xoff xoff;
+ reg_ser_rw_xoff_clr xoff_clr = {0};
+ reg_ser_rw_tr_ctrl tx_ctrl = {0};
+ reg_ser_rw_tr_dma_en tx_dma_en = {0};
+ reg_ser_rw_rec_ctrl rx_ctrl = {0};
+ reg_ser_rw_tr_baud_div tx_baud_div = {0};
+ reg_ser_rw_rec_baud_div rx_baud_div = {0};
+ int baud;
+
+ if (old &&
+ termios->c_cflag == old->c_cflag &&
+ termios->c_iflag == old->c_iflag)
+ return;
+
+ /* Tx: 8 bit, no/even parity, 1 stop bit, no cts. */
+ tx_ctrl.base_freq = regk_ser_f29_493;
+ tx_ctrl.en = 0;
+ tx_ctrl.stop = 0;
+ tx_ctrl.auto_rts = regk_ser_no;
+ tx_ctrl.txd = 1;
+ tx_ctrl.auto_cts = 0;
+ /* Rx: 8 bit, no/even parity. */
+ rx_ctrl.dma_err = regk_ser_stop;
+ rx_ctrl.sampling = regk_ser_majority;
+ rx_ctrl.timeout = 1;
+
+ rx_ctrl.rts_n = regk_ser_inactive;
+
+ /* Common for tx and rx: 8N1. */
+ tx_ctrl.data_bits = regk_ser_bits8;
+ rx_ctrl.data_bits = regk_ser_bits8;
+ tx_ctrl.par = regk_ser_even;
+ rx_ctrl.par = regk_ser_even;
+ tx_ctrl.par_en = regk_ser_no;
+ rx_ctrl.par_en = regk_ser_no;
+
+ tx_ctrl.stop_bits = regk_ser_bits1;
+
+ /*
+ * Change baud-rate and write it to the hardware.
+ *
+ * baud_clock = base_freq / (divisor*8)
+ * divisor = base_freq / (baud_clock * 8)
+ * base_freq is either:
+ * off, ext, 29.493MHz, 32.000 MHz, 32.768 MHz or 100 MHz
+ * 20.493MHz is used for standard baudrates
+ */
+
+ /*
+ * For the console port we keep the original baudrate here. Not very
+ * beautiful.
+ */
+ if ((port != console_port) || old)
+ baud = uart_get_baud_rate(port, termios, old, 0,
+ port->uartclk / 8);
+ else
+ baud = console_baud;
+
+ tx_baud_div.div = 29493000 / (8 * baud);
+ /* Rx uses same as tx. */
+ rx_baud_div.div = tx_baud_div.div;
+ rx_ctrl.base_freq = tx_ctrl.base_freq;
+
+ if ((termios->c_cflag & CSIZE) == CS7) {
+ /* Set 7 bit mode. */
+ tx_ctrl.data_bits = regk_ser_bits7;
+ rx_ctrl.data_bits = regk_ser_bits7;
+ }
+
+ if (termios->c_cflag & CSTOPB) {
+ /* Set 2 stop bit mode. */
+ tx_ctrl.stop_bits = regk_ser_bits2;
+ }
+
+ if (termios->c_cflag & PARENB) {
+ /* Enable parity. */
+ tx_ctrl.par_en = regk_ser_yes;
+ rx_ctrl.par_en = regk_ser_yes;
+ }
+
+ if (termios->c_cflag & CMSPAR) {
+ if (termios->c_cflag & PARODD) {
+ /* Set mark parity if PARODD and CMSPAR. */
+ tx_ctrl.par = regk_ser_mark;
+ rx_ctrl.par = regk_ser_mark;
+ } else {
+ tx_ctrl.par = regk_ser_space;
+ rx_ctrl.par = regk_ser_space;
+ }
+ } else {
+ if (termios->c_cflag & PARODD) {
+ /* Set odd parity. */
+ tx_ctrl.par = regk_ser_odd;
+ rx_ctrl.par = regk_ser_odd;
+ }
+ }
+
+ if (termios->c_cflag & CRTSCTS) {
+ /* Enable automatic CTS handling. */
+ tx_ctrl.auto_cts = regk_ser_yes;
+ }
+
+ /* Make sure the tx and rx are enabled. */
+ tx_ctrl.en = regk_ser_yes;
+ rx_ctrl.en = regk_ser_yes;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ tx_dma_en.en = 0;
+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en);
+
+ /* Actually write the control regs (if modified) to the hardware. */
+ uart_update_timeout(port, termios->c_cflag, port->uartclk/8);
+ MODIFY_REG(up->regi_ser, rw_rec_baud_div, rx_baud_div);
+ MODIFY_REG(up->regi_ser, rw_rec_ctrl, rx_ctrl);
+
+ MODIFY_REG(up->regi_ser, rw_tr_baud_div, tx_baud_div);
+ MODIFY_REG(up->regi_ser, rw_tr_ctrl, tx_ctrl);
+
+ tx_dma_en.en = 0;
+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en);
+
+ xoff = REG_RD(ser, up->regi_ser, rw_xoff);
+
+ if (up->port.state && up->port.state->port.tty &&
+ (up->port.state->port.tty->termios.c_iflag & IXON)) {
+ xoff.chr = STOP_CHAR(up->port.state->port.tty);
+ xoff.automatic = regk_ser_yes;
+ } else
+ xoff.automatic = regk_ser_no;
+
+ MODIFY_REG(up->regi_ser, rw_xoff, xoff);
+
+ /*
+ * Make sure we don't start in an automatically shut-off state due to
+ * a previous early exit.
+ */
+ xoff_clr.clr = 1;
+ REG_WR(ser, up->regi_ser, rw_xoff_clr, xoff_clr);
+
+ etraxfs_uart_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static const char *
+etraxfs_uart_type(struct uart_port *port)
+{
+ return "CRISv32";
+}
+
+static void etraxfs_uart_release_port(struct uart_port *port)
+{
+}
+
+static int etraxfs_uart_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void etraxfs_uart_config_port(struct uart_port *port, int flags)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+
+ up->port.type = PORT_CRIS;
+}
+
+static const struct uart_ops etraxfs_uart_pops = {
+ .tx_empty = etraxfs_uart_tx_empty,
+ .set_mctrl = etraxfs_uart_set_mctrl,
+ .get_mctrl = etraxfs_uart_get_mctrl,
+ .stop_tx = etraxfs_uart_stop_tx,
+ .start_tx = etraxfs_uart_start_tx,
+ .send_xchar = etraxfs_uart_send_xchar,
+ .stop_rx = etraxfs_uart_stop_rx,
+ .enable_ms = etraxfs_uart_enable_ms,
+ .break_ctl = etraxfs_uart_break_ctl,
+ .startup = etraxfs_uart_startup,
+ .shutdown = etraxfs_uart_shutdown,
+ .set_termios = etraxfs_uart_set_termios,
+ .type = etraxfs_uart_type,
+ .release_port = etraxfs_uart_release_port,
+ .request_port = etraxfs_uart_request_port,
+ .config_port = etraxfs_uart_config_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = etraxfs_uart_get_poll_char,
+ .poll_put_char = etraxfs_uart_put_poll_char,
+#endif
+};
+
+static void cris_serial_port_init(struct uart_port *port, int line)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+
+ if (up->initialized)
+ return;
+ up->initialized = 1;
+ port->line = line;
+ spin_lock_init(&port->lock);
+ port->ops = &etraxfs_uart_pops;
+ port->irq = up->irq;
+ port->iobase = (unsigned long) up->regi_ser;
+ port->uartclk = 29493000;
+
+ /*
+ * We can't fit any more than 255 here (unsigned char), though
+ * actually UART_XMIT_SIZE characters could be pending output.
+ * At time of this writing, the definition of "fifosize" is here the
+ * amount of characters that can be pending output after a start_tx call
+ * until tx_empty returns 1: see serial_core.c:uart_wait_until_sent.
+ * This matters for timeout calculations unfortunately, but keeping
+ * larger amounts at the DMA wouldn't win much so let's just play nice.
+ */
+ port->fifosize = 255;
+ port->flags = UPF_BOOT_AUTOCONF;
+}
+
+static int etraxfs_uart_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct uart_cris_port *up;
+ int dev_id;
+
+ if (!np)
+ return -ENODEV;
+
+ dev_id = of_alias_get_id(np, "serial");
+ if (dev_id < 0)
+ dev_id = 0;
+
+ if (dev_id >= UART_NR)
+ return -EINVAL;
+
+ if (etraxfs_uart_ports[dev_id])
+ return -EBUSY;
+
+ up = devm_kzalloc(&pdev->dev, sizeof(struct uart_cris_port),
+ GFP_KERNEL);
+ if (!up)
+ return -ENOMEM;
+
+ up->irq = irq_of_parse_and_map(np, 0);
+ up->regi_ser = of_iomap(np, 0);
+ up->dtr_pin = devm_gpiod_get_optional(&pdev->dev, "dtr");
+ up->dsr_pin = devm_gpiod_get_optional(&pdev->dev, "dsr");
+ up->ri_pin = devm_gpiod_get_optional(&pdev->dev, "ri");
+ up->cd_pin = devm_gpiod_get_optional(&pdev->dev, "cd");
+ up->port.dev = &pdev->dev;
+ cris_serial_port_init(&up->port, dev_id);
+
+ etraxfs_uart_ports[dev_id] = up;
+ platform_set_drvdata(pdev, &up->port);
+ uart_add_one_port(&etraxfs_uart_driver, &up->port);
+
+ return 0;
+}
+
+static int etraxfs_uart_remove(struct platform_device *pdev)
+{
+ struct uart_port *port;
+
+ port = platform_get_drvdata(pdev);
+ uart_remove_one_port(&etraxfs_uart_driver, port);
+ etraxfs_uart_ports[pdev->id] = NULL;
+
+ return 0;
+}
+
+static const struct of_device_id etraxfs_uart_dt_ids[] = {
+ { .compatible = "axis,etraxfs-uart" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, etraxfs_uart_dt_ids);
+
+static struct platform_driver etraxfs_uart_platform_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = of_match_ptr(etraxfs_uart_dt_ids),
+ },
+ .probe = etraxfs_uart_probe,
+ .remove = etraxfs_uart_remove,
+};
+
+static int __init etraxfs_uart_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&etraxfs_uart_driver);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&etraxfs_uart_platform_driver);
+ if (ret)
+ uart_unregister_driver(&etraxfs_uart_driver);
+
+ return ret;
+}
+
+static void __exit etraxfs_uart_exit(void)
+{
+ platform_driver_unregister(&etraxfs_uart_platform_driver);
+ uart_unregister_driver(&etraxfs_uart_driver);
+}
+
+module_init(etraxfs_uart_init);
+module_exit(etraxfs_uart_exit);
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index e7cde3a9566d..b1893f3f88f1 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -237,7 +237,8 @@ struct lpuart_port {
unsigned int rxfifo_size;
bool lpuart32;
- bool lpuart_dma_use;
+ bool lpuart_dma_tx_use;
+ bool lpuart_dma_rx_use;
struct dma_chan *dma_tx_chan;
struct dma_chan *dma_rx_chan;
struct dma_async_tx_descriptor *dma_tx_desc;
@@ -454,6 +455,15 @@ static int lpuart_dma_rx(struct lpuart_port *sport)
return 0;
}
+static void lpuart_flush_buffer(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+ if (sport->lpuart_dma_tx_use) {
+ dmaengine_terminate_all(sport->dma_tx_chan);
+ sport->dma_tx_in_progress = 0;
+ }
+}
+
static void lpuart_dma_rx_complete(void *arg)
{
struct lpuart_port *sport = arg;
@@ -461,6 +471,7 @@ static void lpuart_dma_rx_complete(void *arg)
unsigned long flags;
async_tx_ack(sport->dma_rx_desc);
+ mod_timer(&sport->lpuart_timer, jiffies + sport->dma_rx_timeout);
spin_lock_irqsave(&sport->port.lock, flags);
@@ -506,9 +517,6 @@ static inline void lpuart_prepare_rx(struct lpuart_port *sport)
spin_lock_irqsave(&sport->port.lock, flags);
- init_timer(&sport->lpuart_timer);
- sport->lpuart_timer.function = lpuart_timer_func;
- sport->lpuart_timer.data = (unsigned long)sport;
sport->lpuart_timer.expires = jiffies + sport->dma_rx_timeout;
add_timer(&sport->lpuart_timer);
@@ -571,7 +579,7 @@ static void lpuart_start_tx(struct uart_port *port)
temp = readb(port->membase + UARTCR2);
writeb(temp | UARTCR2_TIE, port->membase + UARTCR2);
- if (sport->lpuart_dma_use) {
+ if (sport->lpuart_dma_tx_use) {
if (!uart_circ_empty(xmit) && !sport->dma_tx_in_progress)
lpuart_prepare_tx(sport);
} else {
@@ -758,19 +766,19 @@ out:
static irqreturn_t lpuart_int(int irq, void *dev_id)
{
struct lpuart_port *sport = dev_id;
- unsigned char sts;
+ unsigned char sts, crdma;
sts = readb(sport->port.membase + UARTSR1);
+ crdma = readb(sport->port.membase + UARTCR5);
- if (sts & UARTSR1_RDRF) {
- if (sport->lpuart_dma_use)
+ if (sts & UARTSR1_RDRF && !(crdma & UARTCR5_RDMAS)) {
+ if (sport->lpuart_dma_rx_use)
lpuart_prepare_rx(sport);
else
lpuart_rxint(irq, dev_id);
}
- if (sts & UARTSR1_TDRE &&
- !(readb(sport->port.membase + UARTCR5) & UARTCR5_TDMAS)) {
- if (sport->lpuart_dma_use)
+ if (sts & UARTSR1_TDRE && !(crdma & UARTCR5_TDMAS)) {
+ if (sport->lpuart_dma_tx_use)
lpuart_pio_tx(sport);
else
lpuart_txint(irq, dev_id);
@@ -953,26 +961,17 @@ static int lpuart_dma_tx_request(struct uart_port *port)
{
struct lpuart_port *sport = container_of(port,
struct lpuart_port, port);
- struct dma_chan *tx_chan;
struct dma_slave_config dma_tx_sconfig;
dma_addr_t dma_bus;
unsigned char *dma_buf;
int ret;
- tx_chan = dma_request_slave_channel(sport->port.dev, "tx");
-
- if (!tx_chan) {
- dev_err(sport->port.dev, "Dma tx channel request failed!\n");
- return -ENODEV;
- }
-
- dma_bus = dma_map_single(tx_chan->device->dev,
+ dma_bus = dma_map_single(sport->dma_tx_chan->device->dev,
sport->port.state->xmit.buf,
UART_XMIT_SIZE, DMA_TO_DEVICE);
- if (dma_mapping_error(tx_chan->device->dev, dma_bus)) {
+ if (dma_mapping_error(sport->dma_tx_chan->device->dev, dma_bus)) {
dev_err(sport->port.dev, "dma_map_single tx failed\n");
- dma_release_channel(tx_chan);
return -ENOMEM;
}
@@ -981,16 +980,14 @@ static int lpuart_dma_tx_request(struct uart_port *port)
dma_tx_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
dma_tx_sconfig.dst_maxburst = sport->txfifo_size;
dma_tx_sconfig.direction = DMA_MEM_TO_DEV;
- ret = dmaengine_slave_config(tx_chan, &dma_tx_sconfig);
+ ret = dmaengine_slave_config(sport->dma_tx_chan, &dma_tx_sconfig);
if (ret < 0) {
dev_err(sport->port.dev,
"Dma slave config failed, err = %d\n", ret);
- dma_release_channel(tx_chan);
return ret;
}
- sport->dma_tx_chan = tx_chan;
sport->dma_tx_buf_virt = dma_buf;
sport->dma_tx_buf_bus = dma_bus;
sport->dma_tx_in_progress = 0;
@@ -1002,34 +999,24 @@ static int lpuart_dma_rx_request(struct uart_port *port)
{
struct lpuart_port *sport = container_of(port,
struct lpuart_port, port);
- struct dma_chan *rx_chan;
struct dma_slave_config dma_rx_sconfig;
dma_addr_t dma_bus;
unsigned char *dma_buf;
int ret;
- rx_chan = dma_request_slave_channel(sport->port.dev, "rx");
-
- if (!rx_chan) {
- dev_err(sport->port.dev, "Dma rx channel request failed!\n");
- return -ENODEV;
- }
-
dma_buf = devm_kzalloc(sport->port.dev,
FSL_UART_RX_DMA_BUFFER_SIZE, GFP_KERNEL);
if (!dma_buf) {
dev_err(sport->port.dev, "Dma rx alloc failed\n");
- dma_release_channel(rx_chan);
return -ENOMEM;
}
- dma_bus = dma_map_single(rx_chan->device->dev, dma_buf,
+ dma_bus = dma_map_single(sport->dma_rx_chan->device->dev, dma_buf,
FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
- if (dma_mapping_error(rx_chan->device->dev, dma_bus)) {
+ if (dma_mapping_error(sport->dma_rx_chan->device->dev, dma_bus)) {
dev_err(sport->port.dev, "dma_map_single rx failed\n");
- dma_release_channel(rx_chan);
return -ENOMEM;
}
@@ -1037,16 +1024,14 @@ static int lpuart_dma_rx_request(struct uart_port *port)
dma_rx_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
dma_rx_sconfig.src_maxburst = 1;
dma_rx_sconfig.direction = DMA_DEV_TO_MEM;
- ret = dmaengine_slave_config(rx_chan, &dma_rx_sconfig);
+ ret = dmaengine_slave_config(sport->dma_rx_chan, &dma_rx_sconfig);
if (ret < 0) {
dev_err(sport->port.dev,
"Dma slave config failed, err = %d\n", ret);
- dma_release_channel(rx_chan);
return ret;
}
- sport->dma_rx_chan = rx_chan;
sport->dma_rx_buf_virt = dma_buf;
sport->dma_rx_buf_bus = dma_bus;
sport->dma_rx_in_progress = 0;
@@ -1058,31 +1043,24 @@ static void lpuart_dma_tx_free(struct uart_port *port)
{
struct lpuart_port *sport = container_of(port,
struct lpuart_port, port);
- struct dma_chan *dma_chan;
dma_unmap_single(sport->port.dev, sport->dma_tx_buf_bus,
UART_XMIT_SIZE, DMA_TO_DEVICE);
- dma_chan = sport->dma_tx_chan;
- sport->dma_tx_chan = NULL;
+
sport->dma_tx_buf_bus = 0;
sport->dma_tx_buf_virt = NULL;
- dma_release_channel(dma_chan);
}
static void lpuart_dma_rx_free(struct uart_port *port)
{
struct lpuart_port *sport = container_of(port,
struct lpuart_port, port);
- struct dma_chan *dma_chan;
dma_unmap_single(sport->port.dev, sport->dma_rx_buf_bus,
FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
- dma_chan = sport->dma_rx_chan;
- sport->dma_rx_chan = NULL;
sport->dma_rx_buf_bus = 0;
sport->dma_rx_buf_virt = NULL;
- dma_release_channel(dma_chan);
}
static int lpuart_startup(struct uart_port *port)
@@ -1101,14 +1079,21 @@ static int lpuart_startup(struct uart_port *port)
sport->rxfifo_size = 0x1 << (((temp >> UARTPFIFO_RXSIZE_OFF) &
UARTPFIFO_FIFOSIZE_MASK) + 1);
- /* Whether use dma support by dma request results */
- if (lpuart_dma_tx_request(port) || lpuart_dma_rx_request(port)) {
- sport->lpuart_dma_use = false;
- } else {
- sport->lpuart_dma_use = true;
+ if (sport->dma_rx_chan && !lpuart_dma_rx_request(port)) {
+ sport->lpuart_dma_rx_use = true;
+ setup_timer(&sport->lpuart_timer, lpuart_timer_func,
+ (unsigned long)sport);
+ } else
+ sport->lpuart_dma_rx_use = false;
+
+
+ if (sport->dma_tx_chan && !lpuart_dma_tx_request(port)) {
+ sport->lpuart_dma_tx_use = true;
temp = readb(port->membase + UARTCR5);
+ temp &= ~UARTCR5_RDMAS;
writeb(temp | UARTCR5_TDMAS, port->membase + UARTCR5);
- }
+ } else
+ sport->lpuart_dma_tx_use = false;
ret = devm_request_irq(port->dev, port->irq, lpuart_int, 0,
DRIVER_NAME, sport);
@@ -1179,10 +1164,13 @@ static void lpuart_shutdown(struct uart_port *port)
devm_free_irq(port->dev, port->irq, sport);
- if (sport->lpuart_dma_use) {
- lpuart_dma_tx_free(port);
- lpuart_dma_rx_free(port);
+ if (sport->lpuart_dma_rx_use) {
+ lpuart_dma_rx_free(&sport->port);
+ del_timer_sync(&sport->lpuart_timer);
}
+
+ if (sport->lpuart_dma_tx_use)
+ lpuart_dma_tx_free(&sport->port);
}
static void lpuart32_shutdown(struct uart_port *port)
@@ -1304,7 +1292,7 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
/* update the per-port timeout */
uart_update_timeout(port, termios->c_cflag, baud);
- if (sport->lpuart_dma_use) {
+ if (sport->lpuart_dma_rx_use) {
/* Calculate delay for 1.5 DMA buffers */
sport->dma_rx_timeout = (sport->port.timeout - HZ / 50) *
FSL_UART_RX_DMA_BUFFER_SIZE * 3 /
@@ -1517,6 +1505,7 @@ static struct uart_ops lpuart_pops = {
.release_port = lpuart_release_port,
.config_port = lpuart_config_port,
.verify_port = lpuart_verify_port,
+ .flush_buffer = lpuart_flush_buffer,
};
static struct uart_ops lpuart32_pops = {
@@ -1535,6 +1524,7 @@ static struct uart_ops lpuart32_pops = {
.release_port = lpuart_release_port,
.config_port = lpuart_config_port,
.verify_port = lpuart_verify_port,
+ .flush_buffer = lpuart_flush_buffer,
};
static struct lpuart_port *lpuart_ports[UART_NR];
@@ -1833,6 +1823,16 @@ static int lpuart_probe(struct platform_device *pdev)
return ret;
}
+ sport->dma_tx_chan = dma_request_slave_channel(sport->port.dev, "tx");
+ if (!sport->dma_tx_chan)
+ dev_info(sport->port.dev, "DMA tx channel request failed, "
+ "operating without tx DMA\n");
+
+ sport->dma_rx_chan = dma_request_slave_channel(sport->port.dev, "rx");
+ if (!sport->dma_rx_chan)
+ dev_info(sport->port.dev, "DMA rx channel request failed, "
+ "operating without rx DMA\n");
+
return 0;
}
@@ -1844,6 +1844,12 @@ static int lpuart_remove(struct platform_device *pdev)
clk_disable_unprepare(sport->clk);
+ if (sport->dma_tx_chan)
+ dma_release_channel(sport->dma_tx_chan);
+
+ if (sport->dma_rx_chan)
+ dma_release_channel(sport->dma_rx_chan);
+
return 0;
}
@@ -1851,6 +1857,19 @@ static int lpuart_remove(struct platform_device *pdev)
static int lpuart_suspend(struct device *dev)
{
struct lpuart_port *sport = dev_get_drvdata(dev);
+ unsigned long temp;
+
+ if (sport->lpuart32) {
+ /* disable Rx/Tx and interrupts */
+ temp = lpuart32_read(sport->port.membase + UARTCTRL);
+ temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE);
+ lpuart32_write(temp, sport->port.membase + UARTCTRL);
+ } else {
+ /* disable Rx/Tx and interrupts */
+ temp = readb(sport->port.membase + UARTCR2);
+ temp &= ~(UARTCR2_TE | UARTCR2_TIE | UARTCR2_TCIE);
+ writeb(temp, sport->port.membase + UARTCR2);
+ }
uart_suspend_port(&lpuart_reg, &sport->port);
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 4c5e9092e2d7..0eb29b1c47ac 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -74,6 +74,7 @@
#define IMX21_UTS 0xb4 /* UART Test Register on all other i.mx*/
/* UART Control Register Bit Fields.*/
+#define URXD_DUMMY_READ (1<<16)
#define URXD_CHARRDY (1<<15)
#define URXD_ERR (1<<14)
#define URXD_OVRRUN (1<<13)
@@ -463,13 +464,17 @@ static void imx_enable_ms(struct uart_port *port)
mod_timer(&sport->timer, jiffies);
}
+static void imx_dma_tx(struct imx_port *sport);
static inline void imx_transmit_buffer(struct imx_port *sport)
{
struct circ_buf *xmit = &sport->port.state->xmit;
+ unsigned long temp;
if (sport->port.x_char) {
/* Send next char */
writel(sport->port.x_char, sport->port.membase + URTX0);
+ sport->port.icount.tx++;
+ sport->port.x_char = 0;
return;
}
@@ -478,6 +483,22 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
return;
}
+ if (sport->dma_is_enabled) {
+ /*
+ * We've just sent a X-char Ensure the TX DMA is enabled
+ * and the TX IRQ is disabled.
+ **/
+ temp = readl(sport->port.membase + UCR1);
+ temp &= ~UCR1_TXMPTYEN;
+ if (sport->dma_is_txing) {
+ temp |= UCR1_TDMAEN;
+ writel(temp, sport->port.membase + UCR1);
+ } else {
+ writel(temp, sport->port.membase + UCR1);
+ imx_dma_tx(sport);
+ }
+ }
+
while (!uart_circ_empty(xmit) &&
!(readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL)) {
/* send xmit->buf[xmit->tail]
@@ -500,26 +521,39 @@ static void dma_tx_callback(void *data)
struct scatterlist *sgl = &sport->tx_sgl[0];
struct circ_buf *xmit = &sport->port.state->xmit;
unsigned long flags;
+ unsigned long temp;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
dma_unmap_sg(sport->port.dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE);
- sport->dma_is_txing = 0;
+ temp = readl(sport->port.membase + UCR1);
+ temp &= ~UCR1_TDMAEN;
+ writel(temp, sport->port.membase + UCR1);
/* update the stat */
- spin_lock_irqsave(&sport->port.lock, flags);
xmit->tail = (xmit->tail + sport->tx_bytes) & (UART_XMIT_SIZE - 1);
sport->port.icount.tx += sport->tx_bytes;
- spin_unlock_irqrestore(&sport->port.lock, flags);
dev_dbg(sport->port.dev, "we finish the TX DMA.\n");
- uart_write_wakeup(&sport->port);
+ sport->dma_is_txing = 0;
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&sport->port);
if (waitqueue_active(&sport->dma_wait)) {
wake_up(&sport->dma_wait);
dev_dbg(sport->port.dev, "exit in %s.\n", __func__);
return;
}
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+ if (!uart_circ_empty(xmit) && !uart_tx_stopped(&sport->port))
+ imx_dma_tx(sport);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
static void imx_dma_tx(struct imx_port *sport)
@@ -529,24 +563,23 @@ static void imx_dma_tx(struct imx_port *sport)
struct dma_async_tx_descriptor *desc;
struct dma_chan *chan = sport->dma_chan_tx;
struct device *dev = sport->port.dev;
- enum dma_status status;
+ unsigned long temp;
int ret;
- status = dmaengine_tx_status(chan, (dma_cookie_t)0, NULL);
- if (DMA_IN_PROGRESS == status)
+ if (sport->dma_is_txing)
return;
sport->tx_bytes = uart_circ_chars_pending(xmit);
- if (xmit->tail > xmit->head && xmit->head > 0) {
+ if (xmit->tail < xmit->head) {
+ sport->dma_tx_nents = 1;
+ sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes);
+ } else {
sport->dma_tx_nents = 2;
sg_init_table(sgl, 2);
sg_set_buf(sgl, xmit->buf + xmit->tail,
UART_XMIT_SIZE - xmit->tail);
sg_set_buf(sgl + 1, xmit->buf, xmit->head);
- } else {
- sport->dma_tx_nents = 1;
- sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes);
}
ret = dma_map_sg(dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE);
@@ -557,6 +590,8 @@ static void imx_dma_tx(struct imx_port *sport)
desc = dmaengine_prep_slave_sg(chan, sgl, sport->dma_tx_nents,
DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
if (!desc) {
+ dma_unmap_sg(dev, sgl, sport->dma_tx_nents,
+ DMA_TO_DEVICE);
dev_err(dev, "We cannot prepare for the TX slave dma!\n");
return;
}
@@ -565,6 +600,11 @@ static void imx_dma_tx(struct imx_port *sport)
dev_dbg(dev, "TX: prepare to send %lu bytes by DMA.\n",
uart_circ_chars_pending(xmit));
+
+ temp = readl(sport->port.membase + UCR1);
+ temp |= UCR1_TDMAEN;
+ writel(temp, sport->port.membase + UCR1);
+
/* fire it */
sport->dma_is_txing = 1;
dmaengine_submit(desc);
@@ -590,13 +630,6 @@ static void imx_start_tx(struct uart_port *port)
temp &= ~(UCR1_RRDYEN);
writel(temp, sport->port.membase + UCR1);
}
- /* Clear any pending ORE flag before enabling interrupt */
- temp = readl(sport->port.membase + USR2);
- writel(temp | USR2_ORE, sport->port.membase + USR2);
-
- temp = readl(sport->port.membase + UCR4);
- temp |= UCR4_OREN;
- writel(temp, sport->port.membase + UCR4);
if (!sport->dma_is_enabled) {
temp = readl(sport->port.membase + UCR1);
@@ -614,15 +647,21 @@ static void imx_start_tx(struct uart_port *port)
}
if (sport->dma_is_enabled) {
- /* FIXME: port->x_char must be transmitted if != 0 */
+ if (sport->port.x_char) {
+ /* We have X-char to send, so enable TX IRQ and
+ * disable TX DMA to let TX interrupt to send X-char */
+ temp = readl(sport->port.membase + UCR1);
+ temp &= ~UCR1_TDMAEN;
+ temp |= UCR1_TXMPTYEN;
+ writel(temp, sport->port.membase + UCR1);
+ return;
+ }
+
if (!uart_circ_empty(&port->state->xmit) &&
!uart_tx_stopped(port))
imx_dma_tx(sport);
return;
}
-
- if (readl(sport->port.membase + uts_reg(sport)) & UTS_TXEMPTY)
- imx_transmit_buffer(sport);
}
static irqreturn_t imx_rtsint(int irq, void *dev_id)
@@ -694,7 +733,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
continue;
}
- rx &= sport->port.read_status_mask;
+ rx &= (sport->port.read_status_mask | 0xFF);
if (rx & URXD_BRK)
flg = TTY_BREAK;
@@ -710,6 +749,9 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
#endif
}
+ if (sport->port.ignore_status_mask & URXD_DUMMY_READ)
+ goto out;
+
tty_insert_flip_char(port, rx, flg);
}
@@ -727,6 +769,9 @@ static int start_rx_dma(struct imx_port *sport);
static void imx_dma_rxint(struct imx_port *sport)
{
unsigned long temp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
temp = readl(sport->port.membase + USR2);
if ((temp & USR2_RDR) && !sport->dma_is_rxing) {
@@ -740,6 +785,8 @@ static void imx_dma_rxint(struct imx_port *sport)
/* tell the DMA to receive the data. */
start_rx_dma(sport);
}
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
static irqreturn_t imx_int(int irq, void *dev_id)
@@ -869,6 +916,9 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
static void imx_rx_dma_done(struct imx_port *sport)
{
unsigned long temp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
/* Enable this interrupt when the RXFIFO is empty. */
temp = readl(sport->port.membase + UCR1);
@@ -880,6 +930,8 @@ static void imx_rx_dma_done(struct imx_port *sport)
/* Is the shutdown waiting for us? */
if (waitqueue_active(&sport->dma_wait))
wake_up(&sport->dma_wait);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
/*
@@ -910,12 +962,26 @@ static void dma_rx_callback(void *data)
dev_dbg(sport->port.dev, "We get %d bytes.\n", count);
if (count) {
- tty_insert_flip_string(port, sport->rx_buf, count);
+ if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ))
+ tty_insert_flip_string(port, sport->rx_buf, count);
tty_flip_buffer_push(port);
start_rx_dma(sport);
- } else
+ } else if (readl(sport->port.membase + USR2) & USR2_RDR) {
+ /*
+ * start rx_dma directly once data in RXFIFO, more efficient
+ * than before:
+ * 1. call imx_rx_dma_done to stop dma if no data received
+ * 2. wait next RDR interrupt to start dma transfer.
+ */
+ start_rx_dma(sport);
+ } else {
+ /*
+ * stop dma to prevent too many IDLE event trigged if no data
+ * in RXFIFO
+ */
imx_rx_dma_done(sport);
+ }
}
static int start_rx_dma(struct imx_port *sport)
@@ -935,6 +1001,7 @@ static int start_rx_dma(struct imx_port *sport)
desc = dmaengine_prep_slave_sg(chan, sgl, 1, DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT);
if (!desc) {
+ dma_unmap_sg(dev, sgl, 1, DMA_FROM_DEVICE);
dev_err(dev, "We cannot prepare for the RX slave dma!\n");
return -EINVAL;
}
@@ -1108,12 +1175,20 @@ static int imx_startup(struct uart_port *port)
while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0))
udelay(1);
+ /* Can we enable the DMA support? */
+ if (is_imx6q_uart(sport) && !uart_console(port) &&
+ !sport->dma_is_inited)
+ imx_uart_dma_init(sport);
+
spin_lock_irqsave(&sport->port.lock, flags);
/*
* Finally, clear and enable interrupts
*/
writel(USR1_RTSD, sport->port.membase + USR1);
+ if (sport->dma_is_inited && !sport->dma_is_enabled)
+ imx_enable_dma(sport);
+
temp = readl(sport->port.membase + UCR1);
temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
@@ -1124,6 +1199,14 @@ static int imx_startup(struct uart_port *port)
writel(temp, sport->port.membase + UCR1);
+ /* Clear any pending ORE flag before enabling interrupt */
+ temp = readl(sport->port.membase + USR2);
+ writel(temp | USR2_ORE, sport->port.membase + USR2);
+
+ temp = readl(sport->port.membase + UCR4);
+ temp |= UCR4_OREN;
+ writel(temp, sport->port.membase + UCR4);
+
temp = readl(sport->port.membase + UCR2);
temp |= (UCR2_RXEN | UCR2_TXEN);
if (!sport->have_rtscts)
@@ -1189,9 +1272,11 @@ static void imx_shutdown(struct uart_port *port)
dmaengine_terminate_all(sport->dma_chan_tx);
dmaengine_terminate_all(sport->dma_chan_rx);
}
+ spin_lock_irqsave(&sport->port.lock, flags);
imx_stop_tx(port);
imx_stop_rx(port);
imx_disable_dma(sport);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
imx_uart_dma_exit(sport);
}
@@ -1233,11 +1318,48 @@ static void imx_shutdown(struct uart_port *port)
static void imx_flush_buffer(struct uart_port *port)
{
struct imx_port *sport = (struct imx_port *)port;
+ struct scatterlist *sgl = &sport->tx_sgl[0];
+ unsigned long temp;
+ int i = 100, ubir, ubmr, ubrc, uts;
- if (sport->dma_is_enabled) {
- sport->tx_bytes = 0;
- dmaengine_terminate_all(sport->dma_chan_tx);
+ if (!sport->dma_chan_tx)
+ return;
+
+ sport->tx_bytes = 0;
+ dmaengine_terminate_all(sport->dma_chan_tx);
+ if (sport->dma_is_txing) {
+ dma_unmap_sg(sport->port.dev, sgl, sport->dma_tx_nents,
+ DMA_TO_DEVICE);
+ temp = readl(sport->port.membase + UCR1);
+ temp &= ~UCR1_TDMAEN;
+ writel(temp, sport->port.membase + UCR1);
+ sport->dma_is_txing = false;
}
+
+ /*
+ * According to the Reference Manual description of the UART SRST bit:
+ * "Reset the transmit and receive state machines,
+ * all FIFOs and register USR1, USR2, UBIR, UBMR, UBRC, URXD, UTXD
+ * and UTS[6-3]". As we don't need to restore the old values from
+ * USR1, USR2, URXD, UTXD, only save/restore the other four registers
+ */
+ ubir = readl(sport->port.membase + UBIR);
+ ubmr = readl(sport->port.membase + UBMR);
+ ubrc = readl(sport->port.membase + UBRC);
+ uts = readl(sport->port.membase + IMX21_UTS);
+
+ temp = readl(sport->port.membase + UCR2);
+ temp &= ~UCR2_SRST;
+ writel(temp, sport->port.membase + UCR2);
+
+ while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0))
+ udelay(1);
+
+ /* Restore the registers */
+ writel(ubir, sport->port.membase + UBIR);
+ writel(ubmr, sport->port.membase + UBMR);
+ writel(ubrc, sport->port.membase + UBRC);
+ writel(uts, sport->port.membase + IMX21_UTS);
}
static void
@@ -1280,11 +1402,6 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
if (sport->have_rtscts) {
ucr2 &= ~UCR2_IRTS;
ucr2 |= UCR2_CTSC;
-
- /* Can we enable the DMA support? */
- if (is_imx6q_uart(sport) && !uart_console(port)
- && !sport->dma_is_inited)
- imx_uart_dma_init(sport);
} else {
termios->c_cflag &= ~CRTSCTS;
}
@@ -1319,7 +1436,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
*/
sport->port.ignore_status_mask = 0;
if (termios->c_iflag & IGNPAR)
- sport->port.ignore_status_mask |= URXD_PRERR;
+ sport->port.ignore_status_mask |= URXD_PRERR | URXD_FRMERR;
if (termios->c_iflag & IGNBRK) {
sport->port.ignore_status_mask |= URXD_BRK;
/*
@@ -1330,6 +1447,9 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
sport->port.ignore_status_mask |= URXD_OVRRUN;
}
+ if ((termios->c_cflag & CREAD) == 0)
+ sport->port.ignore_status_mask |= URXD_DUMMY_READ;
+
/*
* Update the per-port timeout.
*/
@@ -1403,8 +1523,6 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
imx_enable_ms(&sport->port);
- if (sport->dma_is_inited && !sport->dma_is_enabled)
- imx_enable_dma(sport);
spin_unlock_irqrestore(&sport->port.lock, flags);
}
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index 10496672dfdb..a9b0ab38a68c 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -3,7 +3,7 @@
/*
* mcf.c -- Freescale ColdFire UART driver
*
- * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
+ * (C) Copyright 2003-2007, Greg Ungerer <gerg@uclinux.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -198,7 +198,6 @@ static void mcf_shutdown(struct uart_port *port)
static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
- struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
unsigned long flags;
unsigned int baud, baudclk;
#if defined(CONFIG_M5272)
@@ -441,7 +440,6 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser)
/* Enable or disable the RS485 support */
static int mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
{
- struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
unsigned char mr1, mr2;
/* Get mode registers */
@@ -631,6 +629,7 @@ static int mcf_probe(struct platform_device *pdev)
port->mapbase = platp[i].mapbase;
port->membase = (platp[i].membase) ? platp[i].membase :
(unsigned char __iomem *) platp[i].mapbase;
+ port->dev = &pdev->dev;
port->iotype = SERIAL_IO_MEM;
port->irq = platp[i].irq;
port->uartclk = MCF_BUSCLK;
@@ -702,7 +701,7 @@ static void __exit mcf_exit(void)
module_init(mcf_init);
module_exit(mcf_exit);
-MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>");
+MODULE_AUTHOR("Greg Ungerer <gerg@uclinux.org>");
MODULE_DESCRIPTION("Freescale ColdFire UART driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:mcfuart");
diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c
index 517cd073dc08..35c55505b3eb 100644
--- a/drivers/tty/serial/men_z135_uart.c
+++ b/drivers/tty/serial/men_z135_uart.c
@@ -23,7 +23,6 @@
#define MEN_Z135_MAX_PORTS 12
#define MEN_Z135_BASECLK 29491200
#define MEN_Z135_FIFO_SIZE 1024
-#define MEN_Z135_NUM_MSI_VECTORS 2
#define MEN_Z135_FIFO_WATERMARK 1020
#define MEN_Z135_STAT_REG 0x0
@@ -34,12 +33,11 @@
#define MEN_Z135_CONF_REG 0x808
#define MEN_Z135_UART_FREQ 0x80c
#define MEN_Z135_BAUD_REG 0x810
-#define MENZ135_TIMEOUT 0x814
+#define MEN_Z135_TIMEOUT 0x814
#define MEN_Z135_MEM_SIZE 0x818
-#define IS_IRQ(x) ((x) & 1)
-#define IRQ_ID(x) (((x) >> 1) & 7)
+#define IRQ_ID(x) ((x) & 0x1f)
#define MEN_Z135_IER_RXCIEN BIT(0) /* RX Space IRQ */
#define MEN_Z135_IER_TXCIEN BIT(1) /* TX Space IRQ */
@@ -94,11 +92,11 @@
#define MEN_Z135_LSR_TEXP BIT(6)
#define MEN_Z135_LSR_RXFIFOERR BIT(7)
-#define MEN_Z135_IRQ_ID_MST 0
-#define MEN_Z135_IRQ_ID_TSA 1
-#define MEN_Z135_IRQ_ID_RDA 2
-#define MEN_Z135_IRQ_ID_RLS 3
-#define MEN_Z135_IRQ_ID_CTI 6
+#define MEN_Z135_IRQ_ID_RLS BIT(0)
+#define MEN_Z135_IRQ_ID_RDA BIT(1)
+#define MEN_Z135_IRQ_ID_CTI BIT(2)
+#define MEN_Z135_IRQ_ID_TSA BIT(3)
+#define MEN_Z135_IRQ_ID_MST BIT(4)
#define LCR(x) (((x) >> MEN_Z135_LCR_SHIFT) & 0xff)
@@ -118,12 +116,18 @@ static int align;
module_param(align, int, S_IRUGO);
MODULE_PARM_DESC(align, "Keep hardware FIFO write pointer aligned, default 0");
+static uint rx_timeout;
+module_param(rx_timeout, uint, S_IRUGO);
+MODULE_PARM_DESC(rx_timeout, "RX timeout. "
+ "Timeout in seconds = (timeout_reg * baud_reg * 4) / freq_reg");
+
struct men_z135_port {
struct uart_port port;
struct mcb_device *mdev;
unsigned char *rxbuf;
u32 stat_reg;
spinlock_t lock;
+ bool automode;
};
#define to_men_z135(port) container_of((port), struct men_z135_port, port)
@@ -180,12 +184,16 @@ static inline void men_z135_reg_clr(struct men_z135_port *uart,
*/
static void men_z135_handle_modem_status(struct men_z135_port *uart)
{
- if (uart->stat_reg & MEN_Z135_MSR_DDCD)
+ u8 msr;
+
+ msr = (uart->stat_reg >> 8) & 0xff;
+
+ if (msr & MEN_Z135_MSR_DDCD)
uart_handle_dcd_change(&uart->port,
- uart->stat_reg & ~MEN_Z135_MSR_DCD);
- if (uart->stat_reg & MEN_Z135_MSR_DCTS)
+ msr & MEN_Z135_MSR_DCD);
+ if (msr & MEN_Z135_MSR_DCTS)
uart_handle_cts_change(&uart->port,
- uart->stat_reg & ~MEN_Z135_MSR_CTS);
+ msr & MEN_Z135_MSR_CTS);
}
static void men_z135_handle_lsr(struct men_z135_port *uart)
@@ -322,7 +330,8 @@ static void men_z135_handle_tx(struct men_z135_port *uart)
txfree = MEN_Z135_FIFO_WATERMARK - txc;
if (txfree <= 0) {
- pr_err("Not enough room in TX FIFO have %d, need %d\n",
+ dev_err(&uart->mdev->dev,
+ "Not enough room in TX FIFO have %d, need %d\n",
txfree, qlen);
goto irq_en;
}
@@ -373,43 +382,54 @@ out:
* @irq: The IRQ number
* @data: Pointer to UART port
*
- * Check IIR register to see which tasklet to start.
+ * Check IIR register to find the cause of the interrupt and handle it.
+ * It is possible that multiple interrupts reason bits are set and reading
+ * the IIR is a destructive read, so we always need to check for all possible
+ * interrupts and handle them.
*/
static irqreturn_t men_z135_intr(int irq, void *data)
{
struct men_z135_port *uart = (struct men_z135_port *)data;
struct uart_port *port = &uart->port;
+ bool handled = false;
+ unsigned long flags;
int irq_id;
uart->stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
- /* IRQ pending is low active */
- if (IS_IRQ(uart->stat_reg))
- return IRQ_NONE;
-
irq_id = IRQ_ID(uart->stat_reg);
- switch (irq_id) {
- case MEN_Z135_IRQ_ID_MST:
- men_z135_handle_modem_status(uart);
- break;
- case MEN_Z135_IRQ_ID_TSA:
- men_z135_handle_tx(uart);
- break;
- case MEN_Z135_IRQ_ID_CTI:
- dev_dbg(&uart->mdev->dev, "Character Timeout Indication\n");
- /* Fallthrough */
- case MEN_Z135_IRQ_ID_RDA:
- /* Reading data clears RX IRQ */
- men_z135_handle_rx(uart);
- break;
- case MEN_Z135_IRQ_ID_RLS:
+
+ if (!irq_id)
+ goto out;
+
+ spin_lock_irqsave(&port->lock, flags);
+ /* It's save to write to IIR[7:6] RXC[9:8] */
+ iowrite8(irq_id, port->membase + MEN_Z135_STAT_REG);
+
+ if (irq_id & MEN_Z135_IRQ_ID_RLS) {
men_z135_handle_lsr(uart);
- break;
- default:
- dev_warn(&uart->mdev->dev, "Unknown IRQ id %d\n", irq_id);
- return IRQ_NONE;
+ handled = true;
+ }
+
+ if (irq_id & (MEN_Z135_IRQ_ID_RDA | MEN_Z135_IRQ_ID_CTI)) {
+ if (irq_id & MEN_Z135_IRQ_ID_CTI)
+ dev_dbg(&uart->mdev->dev, "Character Timeout Indication\n");
+ men_z135_handle_rx(uart);
+ handled = true;
+ }
+
+ if (irq_id & MEN_Z135_IRQ_ID_TSA) {
+ men_z135_handle_tx(uart);
+ handled = true;
}
- return IRQ_HANDLED;
+ if (irq_id & MEN_Z135_IRQ_ID_MST) {
+ men_z135_handle_modem_status(uart);
+ handled = true;
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
+out:
+ return IRQ_RETVAL(handled);
}
/**
@@ -464,21 +484,37 @@ static unsigned int men_z135_tx_empty(struct uart_port *port)
*/
static void men_z135_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- struct men_z135_port *uart = to_men_z135(port);
- u32 conf_reg = 0;
+ u32 old;
+ u32 conf_reg;
+ conf_reg = old = ioread32(port->membase + MEN_Z135_CONF_REG);
if (mctrl & TIOCM_RTS)
conf_reg |= MEN_Z135_MCR_RTS;
+ else
+ conf_reg &= ~MEN_Z135_MCR_RTS;
+
if (mctrl & TIOCM_DTR)
conf_reg |= MEN_Z135_MCR_DTR;
+ else
+ conf_reg &= ~MEN_Z135_MCR_DTR;
+
if (mctrl & TIOCM_OUT1)
conf_reg |= MEN_Z135_MCR_OUT1;
+ else
+ conf_reg &= ~MEN_Z135_MCR_OUT1;
+
if (mctrl & TIOCM_OUT2)
conf_reg |= MEN_Z135_MCR_OUT2;
+ else
+ conf_reg &= ~MEN_Z135_MCR_OUT2;
+
if (mctrl & TIOCM_LOOP)
conf_reg |= MEN_Z135_MCR_LOOP;
+ else
+ conf_reg &= ~MEN_Z135_MCR_LOOP;
- men_z135_reg_set(uart, MEN_Z135_CONF_REG, conf_reg);
+ if (conf_reg != old)
+ iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG);
}
/**
@@ -490,12 +526,9 @@ static void men_z135_set_mctrl(struct uart_port *port, unsigned int mctrl)
static unsigned int men_z135_get_mctrl(struct uart_port *port)
{
unsigned int mctrl = 0;
- u32 stat_reg;
u8 msr;
- stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
-
- msr = ~((stat_reg >> 8) & 0xff);
+ msr = ioread8(port->membase + MEN_Z135_STAT_REG + 1);
if (msr & MEN_Z135_MSR_CTS)
mctrl |= TIOCM_CTS;
@@ -524,6 +557,19 @@ static void men_z135_stop_tx(struct uart_port *port)
men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
}
+/*
+ * men_z135_disable_ms() - Disable Modem Status
+ * port: The UART port
+ *
+ * Enable Modem Status IRQ.
+ */
+static void men_z135_disable_ms(struct uart_port *port)
+{
+ struct men_z135_port *uart = to_men_z135(port);
+
+ men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_MSIEN);
+}
+
/**
* men_z135_start_tx() - Start transmitting characters
* @port: The UART port
@@ -535,6 +581,9 @@ static void men_z135_start_tx(struct uart_port *port)
{
struct men_z135_port *uart = to_men_z135(port);
+ if (uart->automode)
+ men_z135_disable_ms(port);
+
men_z135_handle_tx(uart);
}
@@ -584,6 +633,9 @@ static int men_z135_startup(struct uart_port *port)
iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG);
+ if (rx_timeout)
+ iowrite32(rx_timeout, port->membase + MEN_Z135_TIMEOUT);
+
return 0;
}
@@ -603,6 +655,7 @@ static void men_z135_set_termios(struct uart_port *port,
struct ktermios *termios,
struct ktermios *old)
{
+ struct men_z135_port *uart = to_men_z135(port);
unsigned int baud;
u32 conf_reg;
u32 bd_reg;
@@ -643,6 +696,16 @@ static void men_z135_set_termios(struct uart_port *port,
} else
lcr |= MEN_Z135_PAR_DIS << MEN_Z135_PEN_SHIFT;
+ conf_reg |= MEN_Z135_IER_MSIEN;
+ if (termios->c_cflag & CRTSCTS) {
+ conf_reg |= MEN_Z135_MCR_RCFC;
+ uart->automode = true;
+ termios->c_cflag &= ~CLOCAL;
+ } else {
+ conf_reg &= ~MEN_Z135_MCR_RCFC;
+ uart->automode = false;
+ }
+
termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
conf_reg |= lcr << MEN_Z135_LCR_SHIFT;
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
deleted file mode 100644
index 77239d5e620d..000000000000
--- a/drivers/tty/serial/mrst_max3110.c
+++ /dev/null
@@ -1,909 +0,0 @@
-/*
- * mrst_max3110.c - spi uart protocol driver for Maxim 3110
- *
- * Copyright (c) 2008-2010, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/*
- * Note:
- * 1. From Max3110 spec, the Rx FIFO has 8 words, while the Tx FIFO only has
- * 1 word. If SPI master controller doesn't support sclk frequency change,
- * then the char need be sent out one by one with some delay
- *
- * 2. Currently only RX available interrupt is used, no need for waiting TXE
- * interrupt for a low speed UART device
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#ifdef CONFIG_MAGIC_SYSRQ
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#include <linux/kthread.h>
-#include <linux/spi/spi.h>
-#include <linux/pm.h>
-
-#include "mrst_max3110.h"
-
-#define UART_TX_NEEDED 1
-#define CON_TX_NEEDED 2
-#define BIT_IRQ_PENDING 3
-
-struct uart_max3110 {
- struct uart_port port;
- struct spi_device *spi;
- char name[SPI_NAME_SIZE];
-
- wait_queue_head_t wq;
- struct task_struct *main_thread;
- struct task_struct *read_thread;
- struct mutex thread_mutex;
- struct mutex io_mutex;
-
- u32 baud;
- u16 cur_conf;
- u8 clock;
- u8 parity, word_7bits;
- u16 irq;
-
- unsigned long uart_flags;
-
- /* console related */
- struct circ_buf con_xmit;
-};
-
-/* global data structure, may need be removed */
-static struct uart_max3110 *pmax;
-
-static int receive_chars(struct uart_max3110 *max,
- unsigned short *str, int len);
-static int max3110_read_multi(struct uart_max3110 *max);
-static void max3110_con_receive(struct uart_max3110 *max);
-
-static int max3110_write_then_read(struct uart_max3110 *max,
- const void *txbuf, void *rxbuf, unsigned len, int always_fast)
-{
- struct spi_device *spi = max->spi;
- struct spi_message message;
- struct spi_transfer x;
- int ret;
-
- mutex_lock(&max->io_mutex);
- spi_message_init(&message);
- memset(&x, 0, sizeof x);
- x.len = len;
- x.tx_buf = txbuf;
- x.rx_buf = rxbuf;
- spi_message_add_tail(&x, &message);
-
- if (always_fast)
- x.speed_hz = spi->max_speed_hz;
- else if (max->baud)
- x.speed_hz = max->baud;
-
- /* Do the i/o */
- ret = spi_sync(spi, &message);
- mutex_unlock(&max->io_mutex);
- return ret;
-}
-
-/* Write a 16b word to the device */
-static int max3110_out(struct uart_max3110 *max, const u16 out)
-{
- void *buf;
- u16 *obuf, *ibuf;
- int ret;
-
- buf = kzalloc(8, GFP_KERNEL | GFP_DMA);
- if (!buf)
- return -ENOMEM;
-
- obuf = buf;
- ibuf = buf + 4;
- *obuf = out;
- ret = max3110_write_then_read(max, obuf, ibuf, 2, 1);
- if (ret) {
- pr_warn("%s: get err msg %d when sending 0x%x\n",
- __func__, ret, out);
- goto exit;
- }
-
- receive_chars(max, ibuf, 1);
-
-exit:
- kfree(buf);
- return ret;
-}
-
-/*
- * This is usually used to read data from SPIC RX FIFO, which doesn't
- * need any delay like flushing character out.
- *
- * Return how many valide bytes are read back
- */
-static int max3110_read_multi(struct uart_max3110 *max)
-{
- void *buf;
- u16 *obuf, *ibuf;
- int ret, blen;
-
- blen = M3110_RX_FIFO_DEPTH * sizeof(u16);
- buf = kzalloc(blen * 2, GFP_KERNEL | GFP_DMA);
- if (!buf)
- return 0;
-
- /* tx/rx always have the same length */
- obuf = buf;
- ibuf = buf + blen;
-
- if (max3110_write_then_read(max, obuf, ibuf, blen, 1)) {
- kfree(buf);
- return 0;
- }
-
- ret = receive_chars(max, ibuf, M3110_RX_FIFO_DEPTH);
-
- kfree(buf);
- return ret;
-}
-
-static void serial_m3110_con_putchar(struct uart_port *port, int ch)
-{
- struct uart_max3110 *max =
- container_of(port, struct uart_max3110, port);
- struct circ_buf *xmit = &max->con_xmit;
-
- if (uart_circ_chars_free(xmit)) {
- xmit->buf[xmit->head] = (char)ch;
- xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1);
- }
-}
-
-/*
- * Print a string to the serial port trying not to disturb
- * any possible real use of the port...
- *
- * The console_lock must be held when we get here.
- */
-static void serial_m3110_con_write(struct console *co,
- const char *s, unsigned int count)
-{
- if (!pmax)
- return;
-
- uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar);
-
- if (!test_and_set_bit(CON_TX_NEEDED, &pmax->uart_flags))
- wake_up(&pmax->wq);
-}
-
-static int __init
-serial_m3110_con_setup(struct console *co, char *options)
-{
- struct uart_max3110 *max = pmax;
- int baud = 115200;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- pr_info("setting up console\n");
-
- if (co->index == -1)
- co->index = 0;
-
- if (!max) {
- pr_err("pmax is NULL, return\n");
- return -ENODEV;
- }
-
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
-
- return uart_set_options(&max->port, co, baud, parity, bits, flow);
-}
-
-static struct tty_driver *serial_m3110_con_device(struct console *co,
- int *index)
-{
- struct uart_driver *p = co->data;
- *index = co->index;
- return p->tty_driver;
-}
-
-static struct uart_driver serial_m3110_reg;
-static struct console serial_m3110_console = {
- .name = "ttyS",
- .write = serial_m3110_con_write,
- .device = serial_m3110_con_device,
- .setup = serial_m3110_con_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &serial_m3110_reg,
-};
-
-static unsigned int serial_m3110_tx_empty(struct uart_port *port)
-{
- return 1;
-}
-
-static void serial_m3110_stop_tx(struct uart_port *port)
-{
- return;
-}
-
-/* stop_rx will be called in spin_lock env */
-static void serial_m3110_stop_rx(struct uart_port *port)
-{
- return;
-}
-
-#define WORDS_PER_XFER 128
-static void send_circ_buf(struct uart_max3110 *max,
- struct circ_buf *xmit)
-{
- void *buf;
- u16 *obuf, *ibuf;
- int i, len, blen, dma_size, left, ret = 0;
-
-
- dma_size = WORDS_PER_XFER * sizeof(u16) * 2;
- buf = kzalloc(dma_size, GFP_KERNEL | GFP_DMA);
- if (!buf)
- return;
- obuf = buf;
- ibuf = buf + dma_size/2;
-
- while (!uart_circ_empty(xmit)) {
- left = uart_circ_chars_pending(xmit);
- while (left) {
- len = min(left, WORDS_PER_XFER);
- blen = len * sizeof(u16);
- memset(ibuf, 0, blen);
-
- for (i = 0; i < len; i++) {
- obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG;
- xmit->tail = (xmit->tail + 1) &
- (UART_XMIT_SIZE - 1);
- }
-
- /* Fail to send msg to console is not very critical */
-
- ret = max3110_write_then_read(max, obuf, ibuf, blen, 0);
- if (ret)
- pr_warn("%s: get err msg %d\n", __func__, ret);
-
- receive_chars(max, ibuf, len);
-
- max->port.icount.tx += len;
- left -= len;
- }
- }
-
- kfree(buf);
-}
-
-static void transmit_char(struct uart_max3110 *max)
-{
- struct uart_port *port = &max->port;
- struct circ_buf *xmit = &port->state->xmit;
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(port))
- return;
-
- send_circ_buf(max, xmit);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- serial_m3110_stop_tx(port);
-}
-
-/*
- * This will be called by uart_write() and tty_write, can't
- * go to sleep
- */
-static void serial_m3110_start_tx(struct uart_port *port)
-{
- struct uart_max3110 *max =
- container_of(port, struct uart_max3110, port);
-
- if (!test_and_set_bit(UART_TX_NEEDED, &max->uart_flags))
- wake_up(&max->wq);
-}
-
-static int
-receive_chars(struct uart_max3110 *max, unsigned short *str, int len)
-{
- struct uart_port *port = &max->port;
- struct tty_port *tport;
- char buf[M3110_RX_FIFO_DEPTH];
- int r, w, usable;
-
- /* If uart is not opened, just return */
- if (!port->state)
- return 0;
-
- tport = &port->state->port;
-
- for (r = 0, w = 0; r < len; r++) {
- if (str[r] & MAX3110_BREAK &&
- uart_handle_break(port))
- continue;
-
- if (str[r] & MAX3110_READ_DATA_AVAILABLE) {
- if (uart_handle_sysrq_char(port, str[r] & 0xff))
- continue;
-
- buf[w++] = str[r] & 0xff;
- }
- }
-
- if (!w)
- return 0;
-
- for (r = 0; w; r += usable, w -= usable) {
- usable = tty_buffer_request_room(tport, w);
- if (usable) {
- tty_insert_flip_string(tport, buf + r, usable);
- port->icount.rx += usable;
- }
- }
- tty_flip_buffer_push(tport);
-
- return r;
-}
-
-/*
- * This routine will be used in read_thread or RX IRQ handling,
- * it will first do one round buffer read(8 words), if there is some
- * valid RX data, will try to read 5 more rounds till all data
- * is read out.
- *
- * Use stack space as data buffer to save some system load, and chose
- * 504 Btyes as a threadhold to do a bulk push to upper tty layer when
- * receiving bulk data, a much bigger buffer may cause stack overflow
- */
-static void max3110_con_receive(struct uart_max3110 *max)
-{
- int loop = 1, num;
-
- do {
- num = max3110_read_multi(max);
-
- if (num) {
- loop = 5;
- }
- } while (--loop);
-}
-
-static int max3110_main_thread(void *_max)
-{
- struct uart_max3110 *max = _max;
- wait_queue_head_t *wq = &max->wq;
- int ret = 0;
- struct circ_buf *xmit = &max->con_xmit;
-
- pr_info("start main thread\n");
-
- do {
- wait_event_interruptible(*wq,
- max->uart_flags || kthread_should_stop());
-
- mutex_lock(&max->thread_mutex);
-
- if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags))
- max3110_con_receive(max);
-
- /* first handle console output */
- if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags))
- send_circ_buf(max, xmit);
-
- /* handle uart output */
- if (test_and_clear_bit(UART_TX_NEEDED, &max->uart_flags))
- transmit_char(max);
-
- mutex_unlock(&max->thread_mutex);
-
- } while (!kthread_should_stop());
-
- return ret;
-}
-
-static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
-{
- struct uart_max3110 *max = dev_id;
-
- /* max3110's irq is a falling edge, not level triggered,
- * so no need to disable the irq */
-
- if (!test_and_set_bit(BIT_IRQ_PENDING, &max->uart_flags))
- wake_up(&max->wq);
-
- return IRQ_HANDLED;
-}
-
-/* if don't use RX IRQ, then need a thread to polling read */
-static int max3110_read_thread(void *_max)
-{
- struct uart_max3110 *max = _max;
-
- pr_info("start read thread\n");
- do {
- /*
- * If can't acquire the mutex, it means the main thread
- * is running which will also perform the rx job
- */
- if (mutex_trylock(&max->thread_mutex)) {
- max3110_con_receive(max);
- mutex_unlock(&max->thread_mutex);
- }
-
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(HZ / 20);
- } while (!kthread_should_stop());
-
- return 0;
-}
-
-static int serial_m3110_startup(struct uart_port *port)
-{
- struct uart_max3110 *max =
- container_of(port, struct uart_max3110, port);
- u16 config = 0;
- int ret = 0;
-
- if (port->line != 0) {
- pr_err("uart port startup failed\n");
- return -1;
- }
-
- /* Disable all IRQ and config it to 115200, 8n1 */
- config = WC_TAG | WC_FIFO_ENABLE
- | WC_1_STOPBITS
- | WC_8BIT_WORD
- | WC_BAUD_DR2;
-
- /* as we use thread to handle tx/rx, need set low latency */
- port->state->port.low_latency = 1;
-
- if (max->irq) {
- /* Enable RX IRQ only */
- config |= WC_RXA_IRQ_ENABLE;
- } else {
- /* If IRQ is disabled, start a read thread for input data */
- max->read_thread =
- kthread_run(max3110_read_thread, max, "max3110_read");
- if (IS_ERR(max->read_thread)) {
- ret = PTR_ERR(max->read_thread);
- max->read_thread = NULL;
- pr_err("Can't create read thread!\n");
- return ret;
- }
- }
-
- ret = max3110_out(max, config);
- if (ret) {
- if (max->read_thread)
- kthread_stop(max->read_thread);
- max->read_thread = NULL;
- return ret;
- }
-
- max->cur_conf = config;
- return 0;
-}
-
-static void serial_m3110_shutdown(struct uart_port *port)
-{
- struct uart_max3110 *max =
- container_of(port, struct uart_max3110, port);
- u16 config;
-
- if (max->read_thread) {
- kthread_stop(max->read_thread);
- max->read_thread = NULL;
- }
-
- /* Disable interrupts from this port */
- config = WC_TAG | WC_SW_SHDI;
- max3110_out(max, config);
-}
-
-static void serial_m3110_release_port(struct uart_port *port)
-{
-}
-
-static int serial_m3110_request_port(struct uart_port *port)
-{
- return 0;
-}
-
-static void serial_m3110_config_port(struct uart_port *port, int flags)
-{
- port->type = PORT_MAX3100;
-}
-
-static int
-serial_m3110_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- /* we don't want the core code to modify any port params */
- return -EINVAL;
-}
-
-
-static const char *serial_m3110_type(struct uart_port *port)
-{
- struct uart_max3110 *max =
- container_of(port, struct uart_max3110, port);
- return max->name;
-}
-
-static void
-serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
-{
- struct uart_max3110 *max =
- container_of(port, struct uart_max3110, port);
- unsigned char cval;
- unsigned int baud, parity = 0;
- int clk_div = -1;
- u16 new_conf = max->cur_conf;
-
- switch (termios->c_cflag & CSIZE) {
- case CS7:
- cval = UART_LCR_WLEN7;
- new_conf |= WC_7BIT_WORD;
- break;
- default:
- /* We only support CS7 & CS8 */
- termios->c_cflag &= ~CSIZE;
- termios->c_cflag |= CS8;
- case CS8:
- cval = UART_LCR_WLEN8;
- new_conf |= WC_8BIT_WORD;
- break;
- }
-
- baud = uart_get_baud_rate(port, termios, old, 0, 230400);
-
- /* First calc the div for 1.8MHZ clock case */
- switch (baud) {
- case 300:
- clk_div = WC_BAUD_DR384;
- break;
- case 600:
- clk_div = WC_BAUD_DR192;
- break;
- case 1200:
- clk_div = WC_BAUD_DR96;
- break;
- case 2400:
- clk_div = WC_BAUD_DR48;
- break;
- case 4800:
- clk_div = WC_BAUD_DR24;
- break;
- case 9600:
- clk_div = WC_BAUD_DR12;
- break;
- case 19200:
- clk_div = WC_BAUD_DR6;
- break;
- case 38400:
- clk_div = WC_BAUD_DR3;
- break;
- case 57600:
- clk_div = WC_BAUD_DR2;
- break;
- case 115200:
- clk_div = WC_BAUD_DR1;
- break;
- case 230400:
- if (max->clock & MAX3110_HIGH_CLK)
- break;
- default:
- /* Pick the previous baud rate */
- baud = max->baud;
- clk_div = max->cur_conf & WC_BAUD_DIV_MASK;
- tty_termios_encode_baud_rate(termios, baud, baud);
- }
-
- if (max->clock & MAX3110_HIGH_CLK) {
- clk_div += 1;
- /* High clk version max3110 doesn't support B300 */
- if (baud == 300) {
- baud = 600;
- clk_div = WC_BAUD_DR384;
- }
- if (baud == 230400)
- clk_div = WC_BAUD_DR1;
- tty_termios_encode_baud_rate(termios, baud, baud);
- }
-
- new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div;
-
- if (unlikely(termios->c_cflag & CMSPAR))
- termios->c_cflag &= ~CMSPAR;
-
- if (termios->c_cflag & CSTOPB)
- new_conf |= WC_2_STOPBITS;
- else
- new_conf &= ~WC_2_STOPBITS;
-
- if (termios->c_cflag & PARENB) {
- new_conf |= WC_PARITY_ENABLE;
- parity |= UART_LCR_PARITY;
- } else
- new_conf &= ~WC_PARITY_ENABLE;
-
- if (!(termios->c_cflag & PARODD))
- parity |= UART_LCR_EPAR;
- max->parity = parity;
-
- uart_update_timeout(port, termios->c_cflag, baud);
-
- new_conf |= WC_TAG;
- if (new_conf != max->cur_conf) {
- if (!max3110_out(max, new_conf)) {
- max->cur_conf = new_conf;
- max->baud = baud;
- }
- }
-}
-
-/* Don't handle hw handshaking */
-static unsigned int serial_m3110_get_mctrl(struct uart_port *port)
-{
- return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR;
-}
-
-static void serial_m3110_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-}
-
-static void serial_m3110_break_ctl(struct uart_port *port, int break_state)
-{
-}
-
-static void serial_m3110_pm(struct uart_port *port, unsigned int state,
- unsigned int oldstate)
-{
-}
-
-static struct uart_ops serial_m3110_ops = {
- .tx_empty = serial_m3110_tx_empty,
- .set_mctrl = serial_m3110_set_mctrl,
- .get_mctrl = serial_m3110_get_mctrl,
- .stop_tx = serial_m3110_stop_tx,
- .start_tx = serial_m3110_start_tx,
- .stop_rx = serial_m3110_stop_rx,
- .break_ctl = serial_m3110_break_ctl,
- .startup = serial_m3110_startup,
- .shutdown = serial_m3110_shutdown,
- .set_termios = serial_m3110_set_termios,
- .pm = serial_m3110_pm,
- .type = serial_m3110_type,
- .release_port = serial_m3110_release_port,
- .request_port = serial_m3110_request_port,
- .config_port = serial_m3110_config_port,
- .verify_port = serial_m3110_verify_port,
-};
-
-static struct uart_driver serial_m3110_reg = {
- .owner = THIS_MODULE,
- .driver_name = "MRST serial",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
- .nr = 1,
- .cons = &serial_m3110_console,
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int serial_m3110_suspend(struct device *dev)
-{
- struct spi_device *spi = to_spi_device(dev);
- struct uart_max3110 *max = spi_get_drvdata(spi);
-
- if (max->irq > 0)
- disable_irq(max->irq);
- uart_suspend_port(&serial_m3110_reg, &max->port);
- max3110_out(max, max->cur_conf | WC_SW_SHDI);
- return 0;
-}
-
-static int serial_m3110_resume(struct device *dev)
-{
- struct spi_device *spi = to_spi_device(dev);
- struct uart_max3110 *max = spi_get_drvdata(spi);
-
- max3110_out(max, max->cur_conf);
- uart_resume_port(&serial_m3110_reg, &max->port);
- if (max->irq > 0)
- enable_irq(max->irq);
- return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(serial_m3110_pm_ops, serial_m3110_suspend,
- serial_m3110_resume);
-#define SERIAL_M3110_PM_OPS (&serial_m3110_pm_ops)
-
-#else
-#define SERIAL_M3110_PM_OPS NULL
-#endif
-
-static int serial_m3110_probe(struct spi_device *spi)
-{
- struct uart_max3110 *max;
- void *buffer;
- u16 res;
- int ret = 0;
-
- max = kzalloc(sizeof(*max), GFP_KERNEL);
- if (!max)
- return -ENOMEM;
-
- /* Set spi info */
- spi->bits_per_word = 16;
- max->clock = MAX3110_HIGH_CLK;
-
- spi_setup(spi);
-
- max->port.type = PORT_MAX3100;
- max->port.fifosize = 2; /* Only have 16b buffer */
- max->port.ops = &serial_m3110_ops;
- max->port.line = 0;
- max->port.dev = &spi->dev;
- max->port.uartclk = 115200;
-
- max->spi = spi;
- strcpy(max->name, spi->modalias);
- max->irq = (u16)spi->irq;
-
- mutex_init(&max->thread_mutex);
- mutex_init(&max->io_mutex);
-
- max->word_7bits = 0;
- max->parity = 0;
- max->baud = 0;
-
- max->cur_conf = 0;
- max->uart_flags = 0;
-
- /* Check if reading configuration register returns something sane */
-
- res = RC_TAG;
- ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0);
- if (ret < 0 || res == 0 || res == 0xffff) {
- dev_dbg(&spi->dev, "MAX3111 deemed not present (conf reg %04x)",
- res);
- ret = -ENODEV;
- goto err_get_page;
- }
-
- buffer = (void *)__get_free_page(GFP_KERNEL);
- if (!buffer) {
- ret = -ENOMEM;
- goto err_get_page;
- }
- max->con_xmit.buf = buffer;
- max->con_xmit.head = 0;
- max->con_xmit.tail = 0;
-
- init_waitqueue_head(&max->wq);
-
- max->main_thread = kthread_run(max3110_main_thread,
- max, "max3110_main");
- if (IS_ERR(max->main_thread)) {
- ret = PTR_ERR(max->main_thread);
- goto err_kthread;
- }
-
- if (max->irq) {
- ret = request_irq(max->irq, serial_m3110_irq,
- IRQ_TYPE_EDGE_FALLING, "max3110", max);
- if (ret) {
- max->irq = 0;
- dev_warn(&spi->dev,
- "unable to allocate IRQ, will use polling method\n");
- }
- }
-
- spi_set_drvdata(spi, max);
- pmax = max;
-
- /* Give membase a psudo value to pass serial_core's check */
- max->port.membase = (unsigned char __iomem *)0xff110000;
- uart_add_one_port(&serial_m3110_reg, &max->port);
-
- return 0;
-
-err_kthread:
- free_page((unsigned long)buffer);
-err_get_page:
- kfree(max);
- return ret;
-}
-
-static int serial_m3110_remove(struct spi_device *dev)
-{
- struct uart_max3110 *max = spi_get_drvdata(dev);
-
- if (!max)
- return 0;
-
- uart_remove_one_port(&serial_m3110_reg, &max->port);
-
- free_page((unsigned long)max->con_xmit.buf);
-
- if (max->irq)
- free_irq(max->irq, max);
-
- if (max->main_thread)
- kthread_stop(max->main_thread);
-
- kfree(max);
- return 0;
-}
-
-static struct spi_driver uart_max3110_driver = {
- .driver = {
- .name = "spi_max3111",
- .owner = THIS_MODULE,
- .pm = SERIAL_M3110_PM_OPS,
- },
- .probe = serial_m3110_probe,
- .remove = serial_m3110_remove,
-};
-
-static int __init serial_m3110_init(void)
-{
- int ret = 0;
-
- ret = uart_register_driver(&serial_m3110_reg);
- if (ret)
- return ret;
-
- ret = spi_register_driver(&uart_max3110_driver);
- if (ret)
- uart_unregister_driver(&serial_m3110_reg);
-
- return ret;
-}
-
-static void __exit serial_m3110_exit(void)
-{
- spi_unregister_driver(&uart_max3110_driver);
- uart_unregister_driver(&serial_m3110_reg);
-}
-
-module_init(serial_m3110_init);
-module_exit(serial_m3110_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("spi:max3110-uart");
diff --git a/drivers/tty/serial/mrst_max3110.h b/drivers/tty/serial/mrst_max3110.h
deleted file mode 100644
index 35af0739513b..000000000000
--- a/drivers/tty/serial/mrst_max3110.h
+++ /dev/null
@@ -1,61 +0,0 @@
-#ifndef _MRST_MAX3110_H
-#define _MRST_MAX3110_H
-
-#define MAX3110_HIGH_CLK 0x1 /* 3.6864 MHZ */
-#define MAX3110_LOW_CLK 0x0 /* 1.8432 MHZ */
-
-/* status bits for all 4 MAX3110 operate modes */
-#define MAX3110_READ_DATA_AVAILABLE (1 << 15)
-#define MAX3110_WRITE_BUF_EMPTY (1 << 14)
-#define MAX3110_BREAK (1 << 10)
-
-#define WC_TAG (3 << 14)
-#define RC_TAG (1 << 14)
-#define WD_TAG (2 << 14)
-#define RD_TAG (0 << 14)
-
-/* bits def for write configuration */
-#define WC_FIFO_ENABLE_MASK (1 << 13)
-#define WC_FIFO_ENABLE (0 << 13)
-
-#define WC_SW_SHDI (1 << 12)
-
-#define WC_IRQ_MASK (0xF << 8)
-#define WC_TXE_IRQ_ENABLE (1 << 11) /* TX empty irq */
-#define WC_RXA_IRQ_ENABLE (1 << 10) /* RX available irq */
-#define WC_PAR_HIGH_IRQ_ENABLE (1 << 9)
-#define WC_REC_ACT_IRQ_ENABLE (1 << 8)
-
-#define WC_IRDA_ENABLE (1 << 7)
-
-#define WC_STOPBITS_MASK (1 << 6)
-#define WC_2_STOPBITS (1 << 6)
-#define WC_1_STOPBITS (0 << 6)
-
-#define WC_PARITY_ENABLE_MASK (1 << 5)
-#define WC_PARITY_ENABLE (1 << 5)
-
-#define WC_WORDLEN_MASK (1 << 4)
-#define WC_7BIT_WORD (1 << 4)
-#define WC_8BIT_WORD (0 << 4)
-
-#define WC_BAUD_DIV_MASK (0xF)
-#define WC_BAUD_DR1 (0x0)
-#define WC_BAUD_DR2 (0x1)
-#define WC_BAUD_DR4 (0x2)
-#define WC_BAUD_DR8 (0x3)
-#define WC_BAUD_DR16 (0x4)
-#define WC_BAUD_DR32 (0x5)
-#define WC_BAUD_DR64 (0x6)
-#define WC_BAUD_DR128 (0x7)
-#define WC_BAUD_DR3 (0x8)
-#define WC_BAUD_DR6 (0x9)
-#define WC_BAUD_DR12 (0xA)
-#define WC_BAUD_DR24 (0xB)
-#define WC_BAUD_DR48 (0xC)
-#define WC_BAUD_DR96 (0xD)
-#define WC_BAUD_DR192 (0xE)
-#define WC_BAUD_DR384 (0xF)
-
-#define M3110_RX_FIFO_DEPTH 8
-#endif
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index c88b522ccd73..b73889c8ed4b 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -920,14 +920,15 @@ static void msm_console_write(struct console *co, const char *s,
static int __init msm_console_setup(struct console *co, char *options)
{
struct uart_port *port;
- struct msm_port *msm_port;
- int baud = 0, flow, bits, parity;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
if (unlikely(co->index >= UART_NR || co->index < 0))
return -ENXIO;
port = get_port_from_line(co->index);
- msm_port = UART_TO_MSM(port);
if (unlikely(!port->membase))
return -ENXIO;
@@ -937,23 +938,6 @@ static int __init msm_console_setup(struct console *co, char *options)
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
- bits = 8;
- parity = 'n';
- flow = 'n';
- msm_write(port, UART_MR2_BITS_PER_CHAR_8 | UART_MR2_STOP_BIT_LEN_ONE,
- UART_MR2); /* 8N1 */
-
- if (baud < 300 || baud > 115200)
- baud = 115200;
- msm_set_baud_rate(port, baud);
-
- msm_reset(port);
-
- if (msm_port->is_uartdm) {
- msm_write(port, UART_CR_CMD_PROTECTION_EN, UART_CR);
- msm_write(port, UART_CR_TX_ENABLE, UART_CR);
- }
-
pr_info("msm_serial: console setup on port #%d\n", port->line);
return uart_set_options(port, co, baud, parity, bits, flow);
@@ -1142,9 +1126,6 @@ static int __init msm_serial_init(void)
static void __exit msm_serial_exit(void)
{
-#ifdef CONFIG_SERIAL_MSM_CONSOLE
- unregister_console(&msm_console);
-#endif
platform_driver_unregister(&msm_platform_driver);
uart_unregister_driver(&msm_uart_driver);
}
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index ec553f8eb218..d1298b6cc68e 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -152,8 +152,6 @@ struct mxs_auart_port {
unsigned int mctrl_prev;
enum mxs_auart_type devtype;
- unsigned int irq;
-
struct clk *clk;
struct device *dev;
@@ -1228,37 +1226,32 @@ static int mxs_auart_probe(struct platform_device *pdev)
of_match_device(mxs_auart_dt_ids, &pdev->dev);
struct mxs_auart_port *s;
u32 version;
- int ret = 0;
+ int ret, irq;
struct resource *r;
- s = kzalloc(sizeof(struct mxs_auart_port), GFP_KERNEL);
- if (!s) {
- ret = -ENOMEM;
- goto out;
- }
+ s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
+ if (!s)
+ return -ENOMEM;
ret = serial_mxs_probe_dt(s, pdev);
if (ret > 0)
s->port.line = pdev->id < 0 ? 0 : pdev->id;
else if (ret < 0)
- goto out_free;
+ return ret;
if (of_id) {
pdev->id_entry = of_id->data;
s->devtype = pdev->id_entry->driver_data;
}
- s->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(s->clk)) {
- ret = PTR_ERR(s->clk);
- goto out_free;
- }
+ s->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(s->clk))
+ return PTR_ERR(s->clk);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!r) {
- ret = -ENXIO;
- goto out_free_clk;
- }
+ if (!r)
+ return -ENXIO;
+
s->port.mapbase = r->start;
s->port.membase = ioremap(r->start, resource_size(r));
@@ -1271,11 +1264,15 @@ static int mxs_auart_probe(struct platform_device *pdev)
s->mctrl_prev = 0;
- s->irq = platform_get_irq(pdev, 0);
- s->port.irq = s->irq;
- ret = request_irq(s->irq, mxs_auart_irq_handle, 0, dev_name(&pdev->dev), s);
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ s->port.irq = irq;
+ ret = devm_request_irq(&pdev->dev, irq, mxs_auart_irq_handle, 0,
+ dev_name(&pdev->dev), s);
if (ret)
- goto out_free_clk;
+ return ret;
platform_set_drvdata(pdev, s);
@@ -1288,7 +1285,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
*/
ret = mxs_auart_request_gpio_irq(s);
if (ret)
- goto out_free_irq;
+ return ret;
auart_port[s->port.line] = s;
@@ -1307,14 +1304,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
out_free_gpio_irq:
mxs_auart_free_gpio_irq(s);
-out_free_irq:
auart_port[pdev->id] = NULL;
- free_irq(s->irq, s);
-out_free_clk:
- clk_put(s->clk);
-out_free:
- kfree(s);
-out:
return ret;
}
@@ -1323,13 +1313,8 @@ static int mxs_auart_remove(struct platform_device *pdev)
struct mxs_auart_port *s = platform_get_drvdata(pdev);
uart_remove_one_port(&auart_driver, &s->port);
-
auart_port[pdev->id] = NULL;
-
mxs_auart_free_gpio_irq(s);
- clk_put(s->clk);
- free_irq(s->irq, s);
- kfree(s);
return 0;
}
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 64f1bab7e9d7..7ff61e24a195 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -102,6 +102,11 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
if (of_property_read_u32(np, "fifo-size", &prop) == 0)
port->fifosize = prop;
+ /* Check for a fixed line number */
+ ret = of_alias_get_id(np, "serial");
+ if (ret >= 0)
+ port->line = ret;
+
port->irq = irq_of_parse_and_map(np, 0);
port->iotype = UPIO_MEM;
if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
@@ -128,6 +133,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
if (of_find_property(np, "no-loopback-test", NULL))
port->flags |= UPF_SKIP_TEST;
+ ret = of_alias_get_id(np, "serial");
+ if (ret >= 0)
+ port->line = ret;
+
port->dev = &ofdev->dev;
switch (type) {
@@ -331,6 +340,10 @@ static struct of_device_id of_platform_serial_table[] = {
.data = (void *)PORT_ALTR_16550_F64, },
{ .compatible = "altr,16550-FIFO128",
.data = (void *)PORT_ALTR_16550_F128, },
+ { .compatible = "mrvl,mmp-uart",
+ .data = (void *)PORT_XSCALE, },
+ { .compatible = "mrvl,pxa-uart",
+ .data = (void *)PORT_XSCALE, },
#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
{ .compatible = "ibm,qpace-nwp-serial",
.data = (void *)PORT_NWPSERIAL, },
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 2e1073da6719..10256fa04b40 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -63,7 +63,7 @@
#define UART_ERRATA_i202_MDR1_ACCESS BIT(0)
#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1)
-#define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/
+#define DEFAULT_CLK_SPEED 48000000 /* 48Mhz */
/* SCR register bitmasks */
#define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7)
@@ -93,7 +93,7 @@
/* WER = 0x7F
* Enable module level wakeup in WER reg
*/
-#define OMAP_UART_WER_MOD_WKUP 0X7F
+#define OMAP_UART_WER_MOD_WKUP 0x7F
/* Enable XON/XOFF flow control on output */
#define OMAP_UART_SW_TX 0x08
@@ -114,7 +114,7 @@ struct uart_omap_dma {
dma_addr_t tx_buf_dma_phys;
unsigned int uart_base;
/*
- * Buffer for rx dma.It is not required for tx because the buffer
+ * Buffer for rx dma. It is not required for tx because the buffer
* comes from port structure.
*/
unsigned char *rx_buf;
@@ -151,7 +151,7 @@ struct uart_omap_port {
int use_dma;
/*
* Some bits in registers are cleared on a read, so they must
- * be saved whenever the register is read but the bits will not
+ * be saved whenever the register is read, but the bits will not
* be immediately processed.
*/
unsigned int lsr_break_flag;
@@ -681,7 +681,7 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port)
static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
struct uart_omap_port *up = to_uart_omap_port(port);
- unsigned char mcr = 0, old_mcr;
+ unsigned char mcr = 0, old_mcr, lcr;
dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->port.line);
if (mctrl & TIOCM_RTS)
@@ -701,6 +701,17 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
UART_MCR_DTR | UART_MCR_RTS);
up->mcr = old_mcr | mcr;
serial_out(up, UART_MCR, up->mcr);
+
+ /* Turn off autoRTS if RTS is lowered; restore autoRTS if RTS raised */
+ lcr = serial_in(up, UART_LCR);
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+ if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
+ up->efr |= UART_EFR_RTS;
+ else
+ up->efr &= UART_EFR_RTS;
+ serial_out(up, UART_EFR, up->efr);
+ serial_out(up, UART_LCR, lcr);
+
pm_runtime_mark_last_busy(up->dev);
pm_runtime_put_autosuspend(up->dev);
}
@@ -756,8 +767,6 @@ static int serial_omap_startup(struct uart_port *port)
* (they will be reenabled in set_termios())
*/
serial_omap_clear_fifos(up);
- /* For Hardware flow control */
- serial_out(up, UART_MCR, UART_MCR_RTS);
/*
* Clear the interrupt registers.
@@ -1053,12 +1062,12 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG);
- if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) {
- /* Enable AUTORTS and AUTOCTS */
- up->efr |= UART_EFR_CTS | UART_EFR_RTS;
+ up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF);
- /* Ensure MCR RTS is asserted */
- up->mcr |= UART_MCR_RTS;
+ if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) {
+ /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */
+ up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
+ up->efr |= UART_EFR_CTS;
} else {
/* Disable AUTORTS and AUTOCTS */
up->efr &= ~(UART_EFR_CTS | UART_EFR_RTS);
@@ -1081,8 +1090,10 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
* Enable XON/XOFF flow control on output.
* Transmit XON1, XOFF1
*/
- if (termios->c_iflag & IXOFF)
+ if (termios->c_iflag & IXOFF) {
+ up->port.status |= UPSTAT_AUTOXOFF;
up->efr |= OMAP_UART_SW_TX;
+ }
/*
* IXANY Flag:
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 107e80722575..af821a908720 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -28,6 +28,9 @@
#define SUPPORT_SYSRQ
#endif
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/io.h>
@@ -78,6 +81,10 @@ static void dbg(const char *fmt, ...)
#define S3C24XX_SERIAL_MAJOR 204
#define S3C24XX_SERIAL_MINOR 64
+#define S3C24XX_TX_PIO 1
+#define S3C24XX_TX_DMA 2
+#define S3C24XX_RX_PIO 1
+#define S3C24XX_RX_DMA 2
/* macros to change one thing to another */
#define tx_enabled(port) ((port)->unused[0])
@@ -154,39 +161,272 @@ static void s3c24xx_serial_rx_disable(struct uart_port *port)
static void s3c24xx_serial_stop_tx(struct uart_port *port)
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
+ struct s3c24xx_uart_dma *dma = ourport->dma;
+ struct circ_buf *xmit = &port->state->xmit;
+ struct dma_tx_state state;
+ int count;
- if (tx_enabled(port)) {
- if (s3c24xx_serial_has_interrupt_mask(port))
- __set_bit(S3C64XX_UINTM_TXD,
- portaddrl(port, S3C64XX_UINTM));
- else
- disable_irq_nosync(ourport->tx_irq);
- tx_enabled(port) = 0;
- if (port->flags & UPF_CONS_FLOW)
- s3c24xx_serial_rx_enable(port);
+ if (!tx_enabled(port))
+ return;
+
+ if (s3c24xx_serial_has_interrupt_mask(port))
+ __set_bit(S3C64XX_UINTM_TXD,
+ portaddrl(port, S3C64XX_UINTM));
+ else
+ disable_irq_nosync(ourport->tx_irq);
+
+ if (dma && dma->tx_chan && ourport->tx_in_progress == S3C24XX_TX_DMA) {
+ dmaengine_pause(dma->tx_chan);
+ dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
+ dmaengine_terminate_all(dma->tx_chan);
+ dma_sync_single_for_cpu(ourport->port.dev,
+ dma->tx_transfer_addr, dma->tx_size, DMA_TO_DEVICE);
+ async_tx_ack(dma->tx_desc);
+ count = dma->tx_bytes_requested - state.residue;
+ xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+ port->icount.tx += count;
}
+
+ tx_enabled(port) = 0;
+ ourport->tx_in_progress = 0;
+
+ if (port->flags & UPF_CONS_FLOW)
+ s3c24xx_serial_rx_enable(port);
+
+ ourport->tx_mode = 0;
}
-static void s3c24xx_serial_start_tx(struct uart_port *port)
+static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport);
+
+static void s3c24xx_serial_tx_dma_complete(void *args)
+{
+ struct s3c24xx_uart_port *ourport = args;
+ struct uart_port *port = &ourport->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ struct s3c24xx_uart_dma *dma = ourport->dma;
+ struct dma_tx_state state;
+ unsigned long flags;
+ int count;
+
+
+ dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
+ count = dma->tx_bytes_requested - state.residue;
+ async_tx_ack(dma->tx_desc);
+
+ dma_sync_single_for_cpu(ourport->port.dev, dma->tx_transfer_addr,
+ dma->tx_size, DMA_TO_DEVICE);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+ port->icount.tx += count;
+ ourport->tx_in_progress = 0;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ s3c24xx_serial_start_next_tx(ourport);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
+{
+ struct uart_port *port = &ourport->port;
+ u32 ucon;
+
+ /* Mask Tx interrupt */
+ if (s3c24xx_serial_has_interrupt_mask(port))
+ __set_bit(S3C64XX_UINTM_TXD,
+ portaddrl(port, S3C64XX_UINTM));
+ else
+ disable_irq_nosync(ourport->tx_irq);
+
+ /* Enable tx dma mode */
+ ucon = rd_regl(port, S3C2410_UCON);
+ ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK);
+ ucon |= (dma_get_cache_alignment() >= 16) ?
+ S3C64XX_UCON_TXBURST_16 : S3C64XX_UCON_TXBURST_1;
+ ucon |= S3C64XX_UCON_TXMODE_DMA;
+ wr_regl(port, S3C2410_UCON, ucon);
+
+ ourport->tx_mode = S3C24XX_TX_DMA;
+}
+
+static void enable_tx_pio(struct s3c24xx_uart_port *ourport)
+{
+ struct uart_port *port = &ourport->port;
+ u32 ucon, ufcon;
+
+ /* Set ufcon txtrig */
+ ourport->tx_in_progress = S3C24XX_TX_PIO;
+ ufcon = rd_regl(port, S3C2410_UFCON);
+ wr_regl(port, S3C2410_UFCON, ufcon);
+
+ /* Enable tx pio mode */
+ ucon = rd_regl(port, S3C2410_UCON);
+ ucon &= ~(S3C64XX_UCON_TXMODE_MASK);
+ ucon |= S3C64XX_UCON_TXMODE_CPU;
+ wr_regl(port, S3C2410_UCON, ucon);
+
+ /* Unmask Tx interrupt */
+ if (s3c24xx_serial_has_interrupt_mask(port))
+ __clear_bit(S3C64XX_UINTM_TXD,
+ portaddrl(port, S3C64XX_UINTM));
+ else
+ enable_irq(ourport->tx_irq);
+
+ ourport->tx_mode = S3C24XX_TX_PIO;
+}
+
+static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport)
+{
+ if (ourport->tx_mode != S3C24XX_TX_PIO)
+ enable_tx_pio(ourport);
+}
+
+static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport,
+ unsigned int count)
+{
+ struct uart_port *port = &ourport->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ struct s3c24xx_uart_dma *dma = ourport->dma;
+
+
+ if (ourport->tx_mode != S3C24XX_TX_DMA)
+ enable_tx_dma(ourport);
+
+ while (xmit->tail & (dma_get_cache_alignment() - 1)) {
+ if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
+ return 0;
+ wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ count--;
+ }
+
+ dma->tx_size = count & ~(dma_get_cache_alignment() - 1);
+ dma->tx_transfer_addr = dma->tx_addr + xmit->tail;
+
+ dma_sync_single_for_device(ourport->port.dev, dma->tx_transfer_addr,
+ dma->tx_size, DMA_TO_DEVICE);
+
+ dma->tx_desc = dmaengine_prep_slave_single(dma->tx_chan,
+ dma->tx_transfer_addr, dma->tx_size,
+ DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
+ if (!dma->tx_desc) {
+ dev_err(ourport->port.dev, "Unable to get desc for Tx\n");
+ return -EIO;
+ }
+
+ dma->tx_desc->callback = s3c24xx_serial_tx_dma_complete;
+ dma->tx_desc->callback_param = ourport;
+ dma->tx_bytes_requested = dma->tx_size;
+
+ ourport->tx_in_progress = S3C24XX_TX_DMA;
+ dma->tx_cookie = dmaengine_submit(dma->tx_desc);
+ dma_async_issue_pending(dma->tx_chan);
+ return 0;
+}
+
+static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport)
+{
+ struct uart_port *port = &ourport->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned long count;
+
+ /* Get data size up to the end of buffer */
+ count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+
+ if (!count) {
+ s3c24xx_serial_stop_tx(port);
+ return;
+ }
+
+ if (!ourport->dma || !ourport->dma->tx_chan || count < port->fifosize)
+ s3c24xx_serial_start_tx_pio(ourport);
+ else
+ s3c24xx_serial_start_tx_dma(ourport, count);
+}
+
+void s3c24xx_serial_start_tx(struct uart_port *port)
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
+ struct circ_buf *xmit = &port->state->xmit;
if (!tx_enabled(port)) {
if (port->flags & UPF_CONS_FLOW)
s3c24xx_serial_rx_disable(port);
- if (s3c24xx_serial_has_interrupt_mask(port))
- __clear_bit(S3C64XX_UINTM_TXD,
- portaddrl(port, S3C64XX_UINTM));
- else
- enable_irq(ourport->tx_irq);
tx_enabled(port) = 1;
+ if (!ourport->dma || !ourport->dma->tx_chan)
+ s3c24xx_serial_start_tx_pio(ourport);
+ }
+
+ if (ourport->dma && ourport->dma->tx_chan) {
+ if (!uart_circ_empty(xmit) && !ourport->tx_in_progress)
+ s3c24xx_serial_start_next_tx(ourport);
+ }
+}
+
+static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport,
+ struct tty_port *tty, int count)
+{
+ struct s3c24xx_uart_dma *dma = ourport->dma;
+ int copied;
+
+ if (!count)
+ return;
+
+ dma_sync_single_for_cpu(ourport->port.dev, dma->rx_addr,
+ dma->rx_size, DMA_FROM_DEVICE);
+
+ ourport->port.icount.rx += count;
+ if (!tty) {
+ dev_err(ourport->port.dev, "No tty port\n");
+ return;
+ }
+ copied = tty_insert_flip_string(tty,
+ ((unsigned char *)(ourport->dma->rx_buf)), count);
+ if (copied != count) {
+ WARN_ON(1);
+ dev_err(ourport->port.dev, "RxData copy to tty layer failed\n");
+ }
+}
+
+static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
+ unsigned long ufstat);
+
+static void uart_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
+{
+ struct uart_port *port = &ourport->port;
+ struct tty_port *tty = &port->state->port;
+ unsigned int ch, ufstat;
+ unsigned int count;
+
+ ufstat = rd_regl(port, S3C2410_UFSTAT);
+ count = s3c24xx_serial_rx_fifocnt(ourport, ufstat);
+
+ if (!count)
+ return;
+
+ while (count-- > 0) {
+ ch = rd_regb(port, S3C2410_URXH);
+
+ ourport->port.icount.rx++;
+ tty_insert_flip_char(tty, ch, TTY_NORMAL);
}
+
+ tty_flip_buffer_push(tty);
}
static void s3c24xx_serial_stop_rx(struct uart_port *port)
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
+ struct s3c24xx_uart_dma *dma = ourport->dma;
+ struct tty_port *t = &port->state->port;
+ struct dma_tx_state state;
+ enum dma_status dma_status;
+ unsigned int received;
if (rx_enabled(port)) {
dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
@@ -197,6 +437,17 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port)
disable_irq_nosync(ourport->rx_irq);
rx_enabled(port) = 0;
}
+ if (dma && dma->rx_chan) {
+ dmaengine_pause(dma->tx_chan);
+ dma_status = dmaengine_tx_status(dma->rx_chan,
+ dma->rx_cookie, &state);
+ if (dma_status == DMA_IN_PROGRESS ||
+ dma_status == DMA_PAUSED) {
+ received = dma->rx_bytes_requested - state.residue;
+ dmaengine_terminate_all(dma->rx_chan);
+ s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
+ }
+ }
}
static inline struct s3c24xx_uart_info
@@ -228,12 +479,157 @@ static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
}
+static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport);
+static void s3c24xx_serial_rx_dma_complete(void *args)
+{
+ struct s3c24xx_uart_port *ourport = args;
+ struct uart_port *port = &ourport->port;
+
+ struct s3c24xx_uart_dma *dma = ourport->dma;
+ struct tty_port *t = &port->state->port;
+ struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
+
+ struct dma_tx_state state;
+ unsigned long flags;
+ int received;
+
+ dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state);
+ received = dma->rx_bytes_requested - state.residue;
+ async_tx_ack(dma->rx_desc);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ if (received)
+ s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
+
+ if (tty) {
+ tty_flip_buffer_push(t);
+ tty_kref_put(tty);
+ }
+
+ s3c64xx_start_rx_dma(ourport);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport)
+{
+ struct s3c24xx_uart_dma *dma = ourport->dma;
+
+ dma_sync_single_for_device(ourport->port.dev, dma->rx_addr,
+ dma->rx_size, DMA_FROM_DEVICE);
+
+ dma->rx_desc = dmaengine_prep_slave_single(dma->rx_chan,
+ dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT);
+ if (!dma->rx_desc) {
+ dev_err(ourport->port.dev, "Unable to get desc for Rx\n");
+ return;
+ }
+
+ dma->rx_desc->callback = s3c24xx_serial_rx_dma_complete;
+ dma->rx_desc->callback_param = ourport;
+ dma->rx_bytes_requested = dma->rx_size;
+
+ dma->rx_cookie = dmaengine_submit(dma->rx_desc);
+ dma_async_issue_pending(dma->rx_chan);
+}
/* ? - where has parity gone?? */
#define S3C2410_UERSTAT_PARITY (0x1000)
-static irqreturn_t
-s3c24xx_serial_rx_chars(int irq, void *dev_id)
+static void enable_rx_dma(struct s3c24xx_uart_port *ourport)
+{
+ struct uart_port *port = &ourport->port;
+ unsigned int ucon;
+
+ /* set Rx mode to DMA mode */
+ ucon = rd_regl(port, S3C2410_UCON);
+ ucon &= ~(S3C64XX_UCON_RXBURST_MASK |
+ S3C64XX_UCON_TIMEOUT_MASK |
+ S3C64XX_UCON_EMPTYINT_EN |
+ S3C64XX_UCON_DMASUS_EN |
+ S3C64XX_UCON_TIMEOUT_EN |
+ S3C64XX_UCON_RXMODE_MASK);
+ ucon |= S3C64XX_UCON_RXBURST_16 |
+ 0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
+ S3C64XX_UCON_EMPTYINT_EN |
+ S3C64XX_UCON_TIMEOUT_EN |
+ S3C64XX_UCON_RXMODE_DMA;
+ wr_regl(port, S3C2410_UCON, ucon);
+
+ ourport->rx_mode = S3C24XX_RX_DMA;
+}
+
+static void enable_rx_pio(struct s3c24xx_uart_port *ourport)
+{
+ struct uart_port *port = &ourport->port;
+ unsigned int ucon;
+
+ /* set Rx mode to DMA mode */
+ ucon = rd_regl(port, S3C2410_UCON);
+ ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK |
+ S3C64XX_UCON_EMPTYINT_EN |
+ S3C64XX_UCON_DMASUS_EN |
+ S3C64XX_UCON_TIMEOUT_EN |
+ S3C64XX_UCON_RXMODE_MASK);
+ ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
+ S3C64XX_UCON_TIMEOUT_EN |
+ S3C64XX_UCON_RXMODE_CPU;
+ wr_regl(port, S3C2410_UCON, ucon);
+
+ ourport->rx_mode = S3C24XX_RX_PIO;
+}
+
+static irqreturn_t s3c24xx_serial_rx_chars_dma(int irq, void *dev_id)
+{
+ unsigned int utrstat, ufstat, received;
+ struct s3c24xx_uart_port *ourport = dev_id;
+ struct uart_port *port = &ourport->port;
+ struct s3c24xx_uart_dma *dma = ourport->dma;
+ struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
+ struct tty_port *t = &port->state->port;
+ unsigned long flags;
+ struct dma_tx_state state;
+
+ utrstat = rd_regl(port, S3C2410_UTRSTAT);
+ ufstat = rd_regl(port, S3C2410_UFSTAT);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) {
+ s3c64xx_start_rx_dma(ourport);
+ if (ourport->rx_mode == S3C24XX_RX_PIO)
+ enable_rx_dma(ourport);
+ goto finish;
+ }
+
+ if (ourport->rx_mode == S3C24XX_RX_DMA) {
+ dmaengine_pause(dma->rx_chan);
+ dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state);
+ dmaengine_terminate_all(dma->rx_chan);
+ received = dma->rx_bytes_requested - state.residue;
+ s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
+
+ enable_rx_pio(ourport);
+ }
+
+ uart_rx_drain_fifo(ourport);
+
+ if (tty) {
+ tty_flip_buffer_push(t);
+ tty_kref_put(tty);
+ }
+
+ wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT);
+
+finish:
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t s3c24xx_serial_rx_chars_pio(int irq, void *dev_id)
{
struct s3c24xx_uart_port *ourport = dev_id;
struct uart_port *port = &ourport->port;
@@ -324,16 +720,33 @@ out:
return IRQ_HANDLED;
}
+
+static irqreturn_t s3c24xx_serial_rx_chars(int irq, void *dev_id)
+{
+ struct s3c24xx_uart_port *ourport = dev_id;
+
+ if (ourport->dma && ourport->dma->rx_chan)
+ return s3c24xx_serial_rx_chars_dma(irq, dev_id);
+ return s3c24xx_serial_rx_chars_pio(irq, dev_id);
+}
+
static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
{
struct s3c24xx_uart_port *ourport = id;
struct uart_port *port = &ourport->port;
struct circ_buf *xmit = &port->state->xmit;
unsigned long flags;
- int count = port->fifosize;
+ int count;
spin_lock_irqsave(&port->lock, flags);
+ count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+
+ if (ourport->dma && ourport->dma->tx_chan && count >= port->fifosize) {
+ s3c24xx_serial_start_tx_dma(ourport, count);
+ goto out;
+ }
+
if (port->x_char) {
wr_regb(port, S3C2410_UTXH, port->x_char);
port->icount.tx++;
@@ -352,6 +765,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
/* try and drain the buffer... */
+ count = port->fifosize;
while (!uart_circ_empty(xmit) && count-- > 0) {
if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
break;
@@ -453,6 +867,93 @@ static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
spin_unlock_irqrestore(&port->lock, flags);
}
+static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
+{
+ struct s3c24xx_uart_dma *dma = p->dma;
+ dma_cap_mask_t mask;
+ unsigned long flags;
+
+ /* Default slave configuration parameters */
+ dma->rx_conf.direction = DMA_DEV_TO_MEM;
+ dma->rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma->rx_conf.src_addr = p->port.mapbase + S3C2410_URXH;
+ dma->rx_conf.src_maxburst = 16;
+
+ dma->tx_conf.direction = DMA_MEM_TO_DEV;
+ dma->tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma->tx_conf.dst_addr = p->port.mapbase + S3C2410_UTXH;
+ if (dma_get_cache_alignment() >= 16)
+ dma->tx_conf.dst_maxburst = 16;
+ else
+ dma->tx_conf.dst_maxburst = 1;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ dma->rx_chan = dma_request_slave_channel_compat(mask, dma->fn,
+ dma->rx_param, p->port.dev, "rx");
+ if (!dma->rx_chan)
+ return -ENODEV;
+
+ dmaengine_slave_config(dma->rx_chan, &dma->rx_conf);
+
+ dma->tx_chan = dma_request_slave_channel_compat(mask, dma->fn,
+ dma->tx_param, p->port.dev, "tx");
+ if (!dma->tx_chan) {
+ dma_release_channel(dma->rx_chan);
+ return -ENODEV;
+ }
+
+ dmaengine_slave_config(dma->tx_chan, &dma->tx_conf);
+
+ /* RX buffer */
+ dma->rx_size = PAGE_SIZE;
+
+ dma->rx_buf = kmalloc(dma->rx_size, GFP_KERNEL);
+
+ if (!dma->rx_buf) {
+ dma_release_channel(dma->rx_chan);
+ dma_release_channel(dma->tx_chan);
+ return -ENOMEM;
+ }
+
+ dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf,
+ dma->rx_size, DMA_FROM_DEVICE);
+
+ spin_lock_irqsave(&p->port.lock, flags);
+
+ /* TX buffer */
+ dma->tx_addr = dma_map_single(dma->tx_chan->device->dev,
+ p->port.state->xmit.buf,
+ UART_XMIT_SIZE, DMA_TO_DEVICE);
+
+ spin_unlock_irqrestore(&p->port.lock, flags);
+
+ return 0;
+}
+
+static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
+{
+ struct s3c24xx_uart_dma *dma = p->dma;
+
+ if (dma->rx_chan) {
+ dmaengine_terminate_all(dma->rx_chan);
+ dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr,
+ dma->rx_size, DMA_FROM_DEVICE);
+ kfree(dma->rx_buf);
+ dma_release_channel(dma->rx_chan);
+ dma->rx_chan = NULL;
+ }
+
+ if (dma->tx_chan) {
+ dmaengine_terminate_all(dma->tx_chan);
+ dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr,
+ UART_XMIT_SIZE, DMA_TO_DEVICE);
+ dma_release_channel(dma->tx_chan);
+ dma->tx_chan = NULL;
+ }
+}
+
static void s3c24xx_serial_shutdown(struct uart_port *port)
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
@@ -478,6 +979,11 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
wr_regl(port, S3C64XX_UINTP, 0xf);
wr_regl(port, S3C64XX_UINTM, 0xf);
}
+
+ if (ourport->dma)
+ s3c24xx_serial_release_dma(ourport);
+
+ ourport->tx_in_progress = 0;
}
static int s3c24xx_serial_startup(struct uart_port *port)
@@ -529,12 +1035,21 @@ err:
static int s3c64xx_serial_startup(struct uart_port *port)
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
+ unsigned long flags;
+ unsigned int ufcon;
int ret;
dbg("s3c64xx_serial_startup: port=%p (%08llx,%p)\n",
port, (unsigned long long)port->mapbase, port->membase);
wr_regl(port, S3C64XX_UINTM, 0xf);
+ if (ourport->dma) {
+ ret = s3c24xx_serial_request_dma(ourport);
+ if (ret < 0) {
+ dev_warn(port->dev, "DMA request failed\n");
+ return ret;
+ }
+ }
ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED,
s3c24xx_serial_portname(port), ourport);
@@ -549,8 +1064,20 @@ static int s3c64xx_serial_startup(struct uart_port *port)
tx_enabled(port) = 0;
ourport->tx_claimed = 1;
+ spin_lock_irqsave(&port->lock, flags);
+
+ ufcon = rd_regl(port, S3C2410_UFCON);
+ ufcon |= S3C2410_UFCON_RESETRX | S3C2410_UFCON_RESETTX |
+ S5PV210_UFCON_RXTRIG8;
+ wr_regl(port, S3C2410_UFCON, ufcon);
+
+ enable_rx_pio(ourport);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
/* Enable Rx Interrupt */
__clear_bit(S3C64XX_UINTM_RXD, portaddrl(port, S3C64XX_UINTM));
+
dbg("s3c64xx_serial_startup ok\n");
return ret;
}
@@ -1209,6 +1736,18 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
ret = platform_get_irq(platdev, 1);
if (ret > 0)
ourport->tx_irq = ret;
+ /*
+ * DMA is currently supported only on DT platforms, if DMA properties
+ * are specified.
+ */
+ if (platdev->dev.of_node && of_find_property(platdev->dev.of_node,
+ "dmas", NULL)) {
+ ourport->dma = devm_kzalloc(port->dev,
+ sizeof(*ourport->dma),
+ GFP_KERNEL);
+ if (!ourport->dma)
+ return -ENOMEM;
+ }
ourport->clk = clk_get(&platdev->dev, "uart");
if (IS_ERR(ourport->clk)) {
@@ -1857,6 +2396,111 @@ static struct platform_driver samsung_serial_driver = {
module_platform_driver(samsung_serial_driver);
+#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
+/*
+ * Early console.
+ */
+
+struct samsung_early_console_data {
+ u32 txfull_mask;
+};
+
+static void samsung_early_busyuart(struct uart_port *port)
+{
+ while (!(readl(port->membase + S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXFE))
+ ;
+}
+
+static void samsung_early_busyuart_fifo(struct uart_port *port)
+{
+ struct samsung_early_console_data *data = port->private_data;
+
+ while (readl(port->membase + S3C2410_UFSTAT) & data->txfull_mask)
+ ;
+}
+
+static void samsung_early_putc(struct uart_port *port, int c)
+{
+ if (readl(port->membase + S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE)
+ samsung_early_busyuart_fifo(port);
+ else
+ samsung_early_busyuart(port);
+
+ writeb(c, port->membase + S3C2410_UTXH);
+}
+
+static void samsung_early_write(struct console *con, const char *s, unsigned n)
+{
+ struct earlycon_device *dev = con->data;
+
+ uart_console_write(&dev->port, s, n, samsung_early_putc);
+}
+
+static int __init samsung_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->con->write = samsung_early_write;
+ return 0;
+}
+
+/* S3C2410 */
+static struct samsung_early_console_data s3c2410_early_console_data = {
+ .txfull_mask = S3C2410_UFSTAT_TXFULL,
+};
+
+static int __init s3c2410_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ device->port.private_data = &s3c2410_early_console_data;
+ return samsung_early_console_setup(device, opt);
+}
+OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart",
+ s3c2410_early_console_setup);
+EARLYCON_DECLARE(s3c2410, s3c2410_early_console_setup);
+
+/* S3C2412, S3C2440, S3C64xx */
+static struct samsung_early_console_data s3c2440_early_console_data = {
+ .txfull_mask = S3C2440_UFSTAT_TXFULL,
+};
+
+static int __init s3c2440_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ device->port.private_data = &s3c2440_early_console_data;
+ return samsung_early_console_setup(device, opt);
+}
+OF_EARLYCON_DECLARE(s3c2412, "samsung,s3c2412-uart",
+ s3c2440_early_console_setup);
+OF_EARLYCON_DECLARE(s3c2440, "samsung,s3c2440-uart",
+ s3c2440_early_console_setup);
+OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart",
+ s3c2440_early_console_setup);
+EARLYCON_DECLARE(s3c2412, s3c2440_early_console_setup);
+EARLYCON_DECLARE(s3c2440, s3c2440_early_console_setup);
+EARLYCON_DECLARE(s3c6400, s3c2440_early_console_setup);
+
+/* S5PV210, EXYNOS */
+static struct samsung_early_console_data s5pv210_early_console_data = {
+ .txfull_mask = S5PV210_UFSTAT_TXFULL,
+};
+
+static int __init s5pv210_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ device->port.private_data = &s5pv210_early_console_data;
+ return samsung_early_console_setup(device, opt);
+}
+OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart",
+ s5pv210_early_console_setup);
+OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart",
+ s5pv210_early_console_setup);
+EARLYCON_DECLARE(s5pv210, s5pv210_early_console_setup);
+EARLYCON_DECLARE(exynos4210, s5pv210_early_console_setup);
+#endif
+
MODULE_ALIAS("platform:samsung-uart");
MODULE_DESCRIPTION("Samsung SoC Serial port driver");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
index eb071dd19b2d..d275032aa68d 100644
--- a/drivers/tty/serial/samsung.h
+++ b/drivers/tty/serial/samsung.h
@@ -12,6 +12,8 @@
* published by the Free Software Foundation.
*/
+#include <linux/dmaengine.h>
+
struct s3c24xx_uart_info {
char *name;
unsigned int type;
@@ -41,6 +43,40 @@ struct s3c24xx_serial_drv_data {
unsigned int fifosize[CONFIG_SERIAL_SAMSUNG_UARTS];
};
+struct s3c24xx_uart_dma {
+ dma_filter_fn fn;
+ void *rx_param;
+ void *tx_param;
+
+ unsigned int rx_chan_id;
+ unsigned int tx_chan_id;
+
+ struct dma_slave_config rx_conf;
+ struct dma_slave_config tx_conf;
+
+ struct dma_chan *rx_chan;
+ struct dma_chan *tx_chan;
+
+ dma_addr_t rx_addr;
+ dma_addr_t tx_addr;
+
+ dma_cookie_t rx_cookie;
+ dma_cookie_t tx_cookie;
+
+ char *rx_buf;
+
+ dma_addr_t tx_transfer_addr;
+
+ size_t rx_size;
+ size_t tx_size;
+
+ struct dma_async_tx_descriptor *tx_desc;
+ struct dma_async_tx_descriptor *rx_desc;
+
+ int tx_bytes_requested;
+ int rx_bytes_requested;
+};
+
struct s3c24xx_uart_port {
unsigned char rx_claimed;
unsigned char tx_claimed;
@@ -50,6 +86,10 @@ struct s3c24xx_uart_port {
unsigned int rx_irq;
unsigned int tx_irq;
+ unsigned int tx_in_progress;
+ unsigned int tx_mode;
+ unsigned int rx_mode;
+
struct s3c24xx_uart_info *info;
struct clk *clk;
struct clk *baudclk;
@@ -59,6 +99,8 @@ struct s3c24xx_uart_port {
/* reference to platform data */
struct s3c2410_uartcfg *cfg;
+ struct s3c24xx_uart_dma *dma;
+
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
#endif
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 984605bb5bf1..6a1055ae3437 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -179,14 +179,6 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
if (tty->termios.c_cflag & CBAUD)
uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
}
-
- spin_lock_irq(&uport->lock);
- if (uart_cts_enabled(uport) &&
- !(uport->ops->get_mctrl(uport) & TIOCM_CTS))
- uport->hw_stopped = 1;
- else
- uport->hw_stopped = 0;
- spin_unlock_irq(&uport->lock);
}
/*
@@ -442,6 +434,7 @@ static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
{
struct uart_port *uport = state->uart_port;
struct ktermios *termios;
+ int hw_stopped;
/*
* If we have no tty, termios, or the port does not exist,
@@ -466,6 +459,18 @@ static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
uport->status &= ~UPSTAT_DCD_ENABLE;
else
uport->status |= UPSTAT_DCD_ENABLE;
+
+ /* reset sw-assisted CTS flow control based on (possibly) new mode */
+ hw_stopped = uport->hw_stopped;
+ uport->hw_stopped = uart_softcts_mode(uport) &&
+ !(uport->ops->get_mctrl(uport) & TIOCM_CTS);
+ if (uport->hw_stopped) {
+ if (!hw_stopped)
+ uport->ops->stop_tx(uport);
+ } else {
+ if (hw_stopped)
+ __uart_start(tty);
+ }
spin_unlock_irq(&uport->lock);
}
@@ -619,22 +624,22 @@ static void uart_throttle(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
struct uart_port *port = state->uart_port;
- upf_t mask = 0;
+ upstat_t mask = 0;
if (I_IXOFF(tty))
- mask |= UPF_SOFT_FLOW;
+ mask |= UPSTAT_AUTOXOFF;
if (tty->termios.c_cflag & CRTSCTS)
- mask |= UPF_HARD_FLOW;
+ mask |= UPSTAT_AUTORTS;
- if (port->flags & mask) {
+ if (port->status & mask) {
port->ops->throttle(port);
- mask &= ~port->flags;
+ mask &= ~port->status;
}
- if (mask & UPF_SOFT_FLOW)
+ if (mask & UPSTAT_AUTOXOFF)
uart_send_xchar(tty, STOP_CHAR(tty));
- if (mask & UPF_HARD_FLOW)
+ if (mask & UPSTAT_AUTORTS)
uart_clear_mctrl(port, TIOCM_RTS);
}
@@ -642,22 +647,22 @@ static void uart_unthrottle(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
struct uart_port *port = state->uart_port;
- upf_t mask = 0;
+ upstat_t mask = 0;
if (I_IXOFF(tty))
- mask |= UPF_SOFT_FLOW;
+ mask |= UPSTAT_AUTOXOFF;
if (tty->termios.c_cflag & CRTSCTS)
- mask |= UPF_HARD_FLOW;
+ mask |= UPSTAT_AUTORTS;
- if (port->flags & mask) {
+ if (port->status & mask) {
port->ops->unthrottle(port);
- mask &= ~port->flags;
+ mask &= ~port->status;
}
- if (mask & UPF_SOFT_FLOW)
+ if (mask & UPSTAT_AUTOXOFF)
uart_send_xchar(tty, START_CHAR(tty));
- if (mask & UPF_HARD_FLOW)
+ if (mask & UPSTAT_AUTORTS)
uart_set_mctrl(port, TIOCM_RTS);
}
@@ -1351,30 +1356,6 @@ static void uart_set_termios(struct tty_struct *tty,
mask |= TIOCM_RTS;
uart_set_mctrl(uport, mask);
}
-
- /*
- * If the port is doing h/w assisted flow control, do nothing.
- * We assume that port->hw_stopped has never been set.
- */
- if (uport->flags & UPF_HARD_FLOW)
- return;
-
- /* Handle turning off CRTSCTS */
- if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) {
- spin_lock_irq(&uport->lock);
- uport->hw_stopped = 0;
- __uart_start(tty);
- spin_unlock_irq(&uport->lock);
- }
- /* Handle turning on CRTSCTS */
- else if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
- spin_lock_irq(&uport->lock);
- if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS)) {
- uport->hw_stopped = 1;
- uport->ops->stop_tx(uport);
- }
- spin_unlock_irq(&uport->lock);
- }
}
/*
@@ -2008,23 +1989,24 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
}
put_device(tty_dev);
- if (console_suspend_enabled || !uart_console(uport))
- uport->suspended = 1;
+ /* Nothing to do if the console is not suspending */
+ if (!console_suspend_enabled && uart_console(uport))
+ goto unlock;
+
+ uport->suspended = 1;
if (port->flags & ASYNC_INITIALIZED) {
const struct uart_ops *ops = uport->ops;
int tries;
- if (console_suspend_enabled || !uart_console(uport)) {
- set_bit(ASYNCB_SUSPENDED, &port->flags);
- clear_bit(ASYNCB_INITIALIZED, &port->flags);
-
- spin_lock_irq(&uport->lock);
- ops->stop_tx(uport);
- ops->set_mctrl(uport, 0);
- ops->stop_rx(uport);
- spin_unlock_irq(&uport->lock);
- }
+ set_bit(ASYNCB_SUSPENDED, &port->flags);
+ clear_bit(ASYNCB_INITIALIZED, &port->flags);
+
+ spin_lock_irq(&uport->lock);
+ ops->stop_tx(uport);
+ ops->set_mctrl(uport, 0);
+ ops->stop_rx(uport);
+ spin_unlock_irq(&uport->lock);
/*
* Wait for the transmitter to empty.
@@ -2036,19 +2018,17 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
drv->dev_name,
drv->tty_driver->name_base + uport->line);
- if (console_suspend_enabled || !uart_console(uport))
- ops->shutdown(uport);
+ ops->shutdown(uport);
}
/*
* Disable the console device before suspending.
*/
- if (console_suspend_enabled && uart_console(uport))
+ if (uart_console(uport))
console_stop(uport->cons);
- if (console_suspend_enabled || !uart_console(uport))
- uart_change_pm(state, UART_PM_STATE_OFF);
-
+ uart_change_pm(state, UART_PM_STATE_OFF);
+unlock:
mutex_unlock(&port->mutex);
return 0;
@@ -2856,7 +2836,7 @@ void uart_handle_cts_change(struct uart_port *uport, unsigned int status)
uport->icount.cts++;
- if (uart_cts_enabled(uport)) {
+ if (uart_softcts_mode(uport)) {
if (uport->hw_stopped) {
if (status) {
uport->hw_stopped = 0;
@@ -2869,6 +2849,7 @@ void uart_handle_cts_change(struct uart_port *uport, unsigned int status)
uport->ops->stop_tx(uport);
}
}
+
}
}
EXPORT_SYMBOL_GPL(uart_handle_cts_change);
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index e032963989fc..5b50c792ad5f 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -858,7 +858,7 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
tty_insert_flip_char(tport, 0, TTY_OVERRUN);
tty_flip_buffer_push(tport);
- dev_notice(port->dev, "overrun error\n");
+ dev_dbg(port->dev, "overrun error\n");
copied++;
}
@@ -997,12 +997,15 @@ static inline unsigned long port_rx_irq_mask(struct uart_port *port)
static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
{
unsigned short ssr_status, scr_status, err_enabled;
+ unsigned short slr_status = 0;
struct uart_port *port = ptr;
struct sci_port *s = to_sci_port(port);
irqreturn_t ret = IRQ_NONE;
ssr_status = serial_port_in(port, SCxSR);
scr_status = serial_port_in(port, SCSCR);
+ if (port->type == PORT_SCIF || port->type == PORT_HSCIF)
+ slr_status = serial_port_in(port, SCLSR);
err_enabled = scr_status & port_rx_irq_mask(port);
/* Tx Interrupt */
@@ -1015,8 +1018,11 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
* DR flags
*/
if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) &&
- (scr_status & SCSCR_RIE))
+ (scr_status & SCSCR_RIE)) {
+ if (port->type == PORT_SCIF || port->type == PORT_HSCIF)
+ sci_handle_fifo_overrun(port);
ret = sci_rx_interrupt(irq, ptr);
+ }
/* Error Interrupt */
if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
@@ -1026,6 +1032,12 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
ret = sci_br_interrupt(irq, ptr);
+ /* Overrun Interrupt */
+ if (port->type == PORT_SCIF || port->type == PORT_HSCIF) {
+ if (slr_status & 0x01)
+ sci_handle_fifo_overrun(port);
+ }
+
return ret;
}
@@ -2605,7 +2617,7 @@ static int sci_probe(struct platform_device *dev)
return 0;
}
-static int sci_suspend(struct device *dev)
+static __maybe_unused int sci_suspend(struct device *dev)
{
struct sci_port *sport = dev_get_drvdata(dev);
@@ -2615,7 +2627,7 @@ static int sci_suspend(struct device *dev)
return 0;
}
-static int sci_resume(struct device *dev)
+static __maybe_unused int sci_resume(struct device *dev)
{
struct sci_port *sport = dev_get_drvdata(dev);
@@ -2625,10 +2637,7 @@ static int sci_resume(struct device *dev)
return 0;
}
-static const struct dev_pm_ops sci_dev_pm_ops = {
- .suspend = sci_suspend,
- .resume = sci_resume,
-};
+static SIMPLE_DEV_PM_OPS(sci_dev_pm_ops, sci_suspend, sci_resume);
static struct platform_driver sci_driver = {
.probe = sci_probe,
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index b269f6bd16d6..27ed0e960880 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -177,7 +177,7 @@ static void sirfsoc_uart_stop_tx(struct uart_port *port)
dmaengine_pause(sirfport->tx_dma_chan);
sirfport->tx_dma_state = TX_DMA_PAUSE;
} else {
- if (!sirfport->is_marco)
+ if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg) &
~uint_en->sirfsoc_txfifo_empty_en);
@@ -186,7 +186,7 @@ static void sirfsoc_uart_stop_tx(struct uart_port *port)
uint_en->sirfsoc_txfifo_empty_en);
}
} else {
- if (!sirfport->is_marco)
+ if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg) &
~uint_en->sirfsoc_txfifo_empty_en);
@@ -217,7 +217,7 @@ static void sirfsoc_uart_tx_with_dma(struct sirfsoc_uart_port *sirfport)
}
if (sirfport->tx_dma_state == TX_DMA_RUNNING)
return;
- if (!sirfport->is_marco)
+ if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg)&
~(uint_en->sirfsoc_txfifo_empty_en));
@@ -244,7 +244,7 @@ static void sirfsoc_uart_tx_with_dma(struct sirfsoc_uart_port *sirfport)
}
if (tran_size < 4)
sirfsoc_uart_pio_tx_chars(sirfport, tran_size);
- if (!sirfport->is_marco)
+ if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg)|
uint_en->sirfsoc_txfifo_empty_en);
@@ -293,7 +293,7 @@ static void sirfsoc_uart_start_tx(struct uart_port *port)
sirfsoc_uart_pio_tx_chars(sirfport,
SIRFSOC_UART_IO_TX_REASONABLE_CNT);
wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START);
- if (!sirfport->is_marco)
+ if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg)|
uint_en->sirfsoc_txfifo_empty_en);
@@ -311,7 +311,7 @@ static void sirfsoc_uart_stop_rx(struct uart_port *port)
wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
if (sirfport->rx_dma_chan) {
- if (!sirfport->is_marco)
+ if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg) &
~(SIRFUART_RX_DMA_INT_EN(port, uint_en) |
@@ -322,7 +322,7 @@ static void sirfsoc_uart_stop_rx(struct uart_port *port)
uint_en->sirfsoc_rx_done_en);
dmaengine_terminate_all(sirfport->rx_dma_chan);
} else {
- if (!sirfport->is_marco)
+ if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg)&
~(SIRFUART_RX_IO_INT_EN(port, uint_en)));
@@ -344,7 +344,7 @@ static void sirfsoc_uart_disable_ms(struct uart_port *port)
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
wr_regl(port, ureg->sirfsoc_afc_ctrl,
rd_regl(port, ureg->sirfsoc_afc_ctrl) & ~0x3FF);
- if (!sirfport->is_marco)
+ if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg)&
~uint_en->sirfsoc_cts_en);
@@ -380,7 +380,7 @@ static void sirfsoc_uart_enable_ms(struct uart_port *port)
wr_regl(port, ureg->sirfsoc_afc_ctrl,
rd_regl(port, ureg->sirfsoc_afc_ctrl) |
SIRFUART_AFC_TX_EN | SIRFUART_AFC_RX_EN);
- if (!sirfport->is_marco)
+ if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg)
| uint_en->sirfsoc_cts_en);
@@ -544,7 +544,7 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param)
sirfport->rx_io_count = 0;
wr_regl(port, ureg->sirfsoc_int_st_reg,
uint_st->sirfsoc_rx_done);
- if (!sirfport->is_marco)
+ if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg) &
~(uint_en->sirfsoc_rx_done_en));
@@ -555,7 +555,7 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param)
} else {
wr_regl(port, ureg->sirfsoc_int_st_reg,
uint_st->sirfsoc_rx_done);
- if (!sirfport->is_marco)
+ if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg) |
(uint_en->sirfsoc_rx_done_en));
@@ -578,7 +578,7 @@ static void sirfsoc_uart_handle_rx_tmo(struct sirfsoc_uart_port *sirfport)
dmaengine_terminate_all(sirfport->rx_dma_chan);
sirfport->rx_dma_items[sirfport->rx_issued].xmit.head =
SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue;
- if (!sirfport->is_marco)
+ if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg) &
~(uint_en->sirfsoc_rx_timeout_en));
@@ -598,7 +598,7 @@ static void sirfsoc_uart_handle_rx_done(struct sirfsoc_uart_port *sirfport)
sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count);
if (sirfport->rx_io_count == 4) {
sirfport->rx_io_count = 0;
- if (!sirfport->is_marco)
+ if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg) &
~(uint_en->sirfsoc_rx_done_en));
@@ -748,7 +748,7 @@ static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port)
for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++)
sirfsoc_rx_submit_one_dma_desc(port, i);
sirfport->rx_completed = sirfport->rx_issued = 0;
- if (!sirfport->is_marco)
+ if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg) |
SIRFUART_RX_DMA_INT_EN(port, uint_en));
@@ -770,7 +770,7 @@ static void sirfsoc_uart_start_rx(struct uart_port *port)
if (sirfport->rx_dma_chan)
sirfsoc_uart_start_next_rx_dma(port);
else {
- if (!sirfport->is_marco)
+ if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg) |
SIRFUART_RX_IO_INT_EN(port, uint_en));
@@ -1124,7 +1124,7 @@ static void sirfsoc_uart_shutdown(struct uart_port *port)
{
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- if (!sirfport->is_marco)
+ if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg, 0);
else
wr_regl(port, SIRFUART_INT_EN_CLR, ~0UL);
@@ -1271,7 +1271,7 @@ static struct uart_driver sirfsoc_uart_drv = {
static struct of_device_id sirfsoc_uart_ids[] = {
{ .compatible = "sirf,prima2-uart", .data = &sirfsoc_uart,},
- { .compatible = "sirf,marco-uart", .data = &sirfsoc_uart},
+ { .compatible = "sirf,atlas7-uart", .data = &sirfsoc_uart},
{ .compatible = "sirf,prima2-usp-uart", .data = &sirfsoc_usp},
{}
};
@@ -1350,8 +1350,8 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
gpio_direction_output(sirfport->rts_gpio, 1);
}
usp_no_flow_control:
- if (of_device_is_compatible(pdev->dev.of_node, "sirf,marco-uart"))
- sirfport->is_marco = true;
+ if (of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-uart"))
+ sirfport->is_atlas7 = true;
if (of_property_read_u32(pdev->dev.of_node,
"fifosize",
@@ -1393,7 +1393,7 @@ usp_no_flow_control:
goto err;
}
port->uartclk = clk_get_rate(sirfport->clk);
- if (of_device_is_compatible(pdev->dev.of_node, "sirf,marco-bt-uart")) {
+ if (of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-bt-uart")) {
sirfport->clk_general = devm_clk_get(&pdev->dev, "general");
if (IS_ERR(sirfport->clk_general)) {
ret = PTR_ERR(sirfport->clk_general);
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
index 275d03893990..727eb6b88fff 100644
--- a/drivers/tty/serial/sirfsoc_uart.h
+++ b/drivers/tty/serial/sirfsoc_uart.h
@@ -421,8 +421,8 @@ struct sirfsoc_uart_port {
bool is_bt_uart;
struct clk *clk_general;
struct clk *clk_noc;
- /* for SiRFmarco, there are SET/CLR for UART_INT_EN */
- bool is_marco;
+ /* for SiRFatlas7, there are SET/CLR for UART_INT_EN */
+ bool is_atlas7;
struct sirfsoc_uart_register *uart_reg;
struct dma_chan *rx_dma_chan;
struct dma_chan *tx_dma_chan;
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
new file mode 100644
index 000000000000..594b63331ef4
--- /dev/null
+++ b/drivers/tty/serial/sprd_serial.c
@@ -0,0 +1,793 @@
+/*
+ * Copyright (C) 2012-2015 Spreadtrum Communications Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#if defined(CONFIG_SERIAL_SPRD_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+/* device name */
+#define UART_NR_MAX 8
+#define SPRD_TTY_NAME "ttyS"
+#define SPRD_FIFO_SIZE 128
+#define SPRD_DEF_RATE 26000000
+#define SPRD_BAUD_IO_LIMIT 3000000
+#define SPRD_TIMEOUT 256
+
+/* the offset of serial registers and BITs for them */
+/* data registers */
+#define SPRD_TXD 0x0000
+#define SPRD_RXD 0x0004
+
+/* line status register and its BITs */
+#define SPRD_LSR 0x0008
+#define SPRD_LSR_OE BIT(4)
+#define SPRD_LSR_FE BIT(3)
+#define SPRD_LSR_PE BIT(2)
+#define SPRD_LSR_BI BIT(7)
+#define SPRD_LSR_TX_OVER BIT(15)
+
+/* data number in TX and RX fifo */
+#define SPRD_STS1 0x000C
+
+/* interrupt enable register and its BITs */
+#define SPRD_IEN 0x0010
+#define SPRD_IEN_RX_FULL BIT(0)
+#define SPRD_IEN_TX_EMPTY BIT(1)
+#define SPRD_IEN_BREAK_DETECT BIT(7)
+#define SPRD_IEN_TIMEOUT BIT(13)
+
+/* interrupt clear register */
+#define SPRD_ICLR 0x0014
+
+/* line control register */
+#define SPRD_LCR 0x0018
+#define SPRD_LCR_STOP_1BIT 0x10
+#define SPRD_LCR_STOP_2BIT 0x30
+#define SPRD_LCR_DATA_LEN (BIT(2) | BIT(3))
+#define SPRD_LCR_DATA_LEN5 0x0
+#define SPRD_LCR_DATA_LEN6 0x4
+#define SPRD_LCR_DATA_LEN7 0x8
+#define SPRD_LCR_DATA_LEN8 0xc
+#define SPRD_LCR_PARITY (BIT(0) | BIT(1))
+#define SPRD_LCR_PARITY_EN 0x2
+#define SPRD_LCR_EVEN_PAR 0x0
+#define SPRD_LCR_ODD_PAR 0x1
+
+/* control register 1 */
+#define SPRD_CTL1 0x001C
+#define RX_HW_FLOW_CTL_THLD BIT(6)
+#define RX_HW_FLOW_CTL_EN BIT(7)
+#define TX_HW_FLOW_CTL_EN BIT(8)
+#define RX_TOUT_THLD_DEF 0x3E00
+#define RX_HFC_THLD_DEF 0x40
+
+/* fifo threshold register */
+#define SPRD_CTL2 0x0020
+#define THLD_TX_EMPTY 0x40
+#define THLD_RX_FULL 0x40
+
+/* config baud rate register */
+#define SPRD_CLKD0 0x0024
+#define SPRD_CLKD1 0x0028
+
+/* interrupt mask status register */
+#define SPRD_IMSR 0x002C
+#define SPRD_IMSR_RX_FIFO_FULL BIT(0)
+#define SPRD_IMSR_TX_FIFO_EMPTY BIT(1)
+#define SPRD_IMSR_BREAK_DETECT BIT(7)
+#define SPRD_IMSR_TIMEOUT BIT(13)
+
+struct reg_backup {
+ u32 ien;
+ u32 ctrl0;
+ u32 ctrl1;
+ u32 ctrl2;
+ u32 clkd0;
+ u32 clkd1;
+ u32 dspwait;
+};
+
+struct sprd_uart_port {
+ struct uart_port port;
+ struct reg_backup reg_bak;
+ char name[16];
+};
+
+static struct sprd_uart_port *sprd_port[UART_NR_MAX];
+static int sprd_ports_num;
+
+static inline unsigned int serial_in(struct uart_port *port, int offset)
+{
+ return readl_relaxed(port->membase + offset);
+}
+
+static inline void serial_out(struct uart_port *port, int offset, int value)
+{
+ writel_relaxed(value, port->membase + offset);
+}
+
+static unsigned int sprd_tx_empty(struct uart_port *port)
+{
+ if (serial_in(port, SPRD_STS1) & 0xff00)
+ return 0;
+ else
+ return TIOCSER_TEMT;
+}
+
+static unsigned int sprd_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_DSR | TIOCM_CTS;
+}
+
+static void sprd_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* nothing to do */
+}
+
+static void sprd_stop_tx(struct uart_port *port)
+{
+ unsigned int ien, iclr;
+
+ iclr = serial_in(port, SPRD_ICLR);
+ ien = serial_in(port, SPRD_IEN);
+
+ iclr |= SPRD_IEN_TX_EMPTY;
+ ien &= ~SPRD_IEN_TX_EMPTY;
+
+ serial_out(port, SPRD_ICLR, iclr);
+ serial_out(port, SPRD_IEN, ien);
+}
+
+static void sprd_start_tx(struct uart_port *port)
+{
+ unsigned int ien;
+
+ ien = serial_in(port, SPRD_IEN);
+ if (!(ien & SPRD_IEN_TX_EMPTY)) {
+ ien |= SPRD_IEN_TX_EMPTY;
+ serial_out(port, SPRD_IEN, ien);
+ }
+}
+
+static void sprd_stop_rx(struct uart_port *port)
+{
+ unsigned int ien, iclr;
+
+ iclr = serial_in(port, SPRD_ICLR);
+ ien = serial_in(port, SPRD_IEN);
+
+ ien &= ~(SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT);
+ iclr |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT;
+
+ serial_out(port, SPRD_IEN, ien);
+ serial_out(port, SPRD_ICLR, iclr);
+}
+
+/* The Sprd serial does not support this function. */
+static void sprd_break_ctl(struct uart_port *port, int break_state)
+{
+ /* nothing to do */
+}
+
+static int handle_lsr_errors(struct uart_port *port,
+ unsigned int *flag,
+ unsigned int *lsr)
+{
+ int ret = 0;
+
+ /* statistics */
+ if (*lsr & SPRD_LSR_BI) {
+ *lsr &= ~(SPRD_LSR_FE | SPRD_LSR_PE);
+ port->icount.brk++;
+ ret = uart_handle_break(port);
+ if (ret)
+ return ret;
+ } else if (*lsr & SPRD_LSR_PE)
+ port->icount.parity++;
+ else if (*lsr & SPRD_LSR_FE)
+ port->icount.frame++;
+ if (*lsr & SPRD_LSR_OE)
+ port->icount.overrun++;
+
+ /* mask off conditions which should be ignored */
+ *lsr &= port->read_status_mask;
+ if (*lsr & SPRD_LSR_BI)
+ *flag = TTY_BREAK;
+ else if (*lsr & SPRD_LSR_PE)
+ *flag = TTY_PARITY;
+ else if (*lsr & SPRD_LSR_FE)
+ *flag = TTY_FRAME;
+
+ return ret;
+}
+
+static inline void sprd_rx(struct uart_port *port)
+{
+ struct tty_port *tty = &port->state->port;
+ unsigned int ch, flag, lsr, max_count = SPRD_TIMEOUT;
+
+ while ((serial_in(port, SPRD_STS1) & 0x00ff) && max_count--) {
+ lsr = serial_in(port, SPRD_LSR);
+ ch = serial_in(port, SPRD_RXD);
+ flag = TTY_NORMAL;
+ port->icount.rx++;
+
+ if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE |
+ SPRD_LSR_FE | SPRD_LSR_OE))
+ if (handle_lsr_errors(port, &lsr, &flag))
+ continue;
+ if (uart_handle_sysrq_char(port, ch))
+ continue;
+
+ uart_insert_char(port, lsr, SPRD_LSR_OE, ch, flag);
+ }
+
+ tty_flip_buffer_push(tty);
+}
+
+static inline void sprd_tx(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+ int count;
+
+ if (port->x_char) {
+ serial_out(port, SPRD_TXD, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ sprd_stop_tx(port);
+ return;
+ }
+
+ count = THLD_TX_EMPTY;
+ do {
+ serial_out(port, SPRD_TXD, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ sprd_stop_tx(port);
+}
+
+/* this handles the interrupt from one port */
+static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ unsigned int ims;
+
+ spin_lock(&port->lock);
+
+ ims = serial_in(port, SPRD_IMSR);
+
+ if (!ims)
+ return IRQ_NONE;
+
+ serial_out(port, SPRD_ICLR, ~0);
+
+ if (ims & (SPRD_IMSR_RX_FIFO_FULL |
+ SPRD_IMSR_BREAK_DETECT | SPRD_IMSR_TIMEOUT))
+ sprd_rx(port);
+
+ if (ims & SPRD_IMSR_TX_FIFO_EMPTY)
+ sprd_tx(port);
+
+ spin_unlock(&port->lock);
+
+ return IRQ_HANDLED;
+}
+
+static int sprd_startup(struct uart_port *port)
+{
+ int ret = 0;
+ unsigned int ien, fc;
+ unsigned int timeout;
+ struct sprd_uart_port *sp;
+ unsigned long flags;
+
+ serial_out(port, SPRD_CTL2, ((THLD_TX_EMPTY << 8) | THLD_RX_FULL));
+
+ /* clear rx fifo */
+ timeout = SPRD_TIMEOUT;
+ while (timeout-- && serial_in(port, SPRD_STS1) & 0x00ff)
+ serial_in(port, SPRD_RXD);
+
+ /* clear tx fifo */
+ timeout = SPRD_TIMEOUT;
+ while (timeout-- && serial_in(port, SPRD_STS1) & 0xff00)
+ cpu_relax();
+
+ /* clear interrupt */
+ serial_out(port, SPRD_IEN, 0);
+ serial_out(port, SPRD_ICLR, ~0);
+
+ /* allocate irq */
+ sp = container_of(port, struct sprd_uart_port, port);
+ snprintf(sp->name, sizeof(sp->name), "sprd_serial%d", port->line);
+ ret = devm_request_irq(port->dev, port->irq, sprd_handle_irq,
+ IRQF_SHARED, sp->name, port);
+ if (ret) {
+ dev_err(port->dev, "fail to request serial irq %d, ret=%d\n",
+ port->irq, ret);
+ return ret;
+ }
+ fc = serial_in(port, SPRD_CTL1);
+ fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;
+ serial_out(port, SPRD_CTL1, fc);
+
+ /* enable interrupt */
+ spin_lock_irqsave(&port->lock, flags);
+ ien = serial_in(port, SPRD_IEN);
+ ien |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT | SPRD_IEN_TIMEOUT;
+ serial_out(port, SPRD_IEN, ien);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return 0;
+}
+
+static void sprd_shutdown(struct uart_port *port)
+{
+ serial_out(port, SPRD_IEN, 0);
+ serial_out(port, SPRD_ICLR, ~0);
+ devm_free_irq(port->dev, port->irq, port);
+}
+
+static void sprd_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned int baud, quot;
+ unsigned int lcr = 0, fc;
+ unsigned long flags;
+
+ /* ask the core to calculate the divisor for us */
+ baud = uart_get_baud_rate(port, termios, old, 0, SPRD_BAUD_IO_LIMIT);
+
+ quot = (unsigned int)((port->uartclk + baud / 2) / baud);
+
+ /* set data length */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ lcr |= SPRD_LCR_DATA_LEN5;
+ break;
+ case CS6:
+ lcr |= SPRD_LCR_DATA_LEN6;
+ break;
+ case CS7:
+ lcr |= SPRD_LCR_DATA_LEN7;
+ break;
+ case CS8:
+ default:
+ lcr |= SPRD_LCR_DATA_LEN8;
+ break;
+ }
+
+ /* calculate stop bits */
+ lcr &= ~(SPRD_LCR_STOP_1BIT | SPRD_LCR_STOP_2BIT);
+ if (termios->c_cflag & CSTOPB)
+ lcr |= SPRD_LCR_STOP_2BIT;
+ else
+ lcr |= SPRD_LCR_STOP_1BIT;
+
+ /* calculate parity */
+ lcr &= ~SPRD_LCR_PARITY;
+ termios->c_cflag &= ~CMSPAR; /* no support mark/space */
+ if (termios->c_cflag & PARENB) {
+ lcr |= SPRD_LCR_PARITY_EN;
+ if (termios->c_cflag & PARODD)
+ lcr |= SPRD_LCR_ODD_PAR;
+ else
+ lcr |= SPRD_LCR_EVEN_PAR;
+ }
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* update the per-port timeout */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ port->read_status_mask = SPRD_LSR_OE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= SPRD_LSR_FE | SPRD_LSR_PE;
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+ port->read_status_mask |= SPRD_LSR_BI;
+
+ /* characters to ignore */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= SPRD_LSR_PE | SPRD_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= SPRD_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= SPRD_LSR_OE;
+ }
+
+ /* flow control */
+ fc = serial_in(port, SPRD_CTL1);
+ fc &= ~(RX_HW_FLOW_CTL_THLD | RX_HW_FLOW_CTL_EN | TX_HW_FLOW_CTL_EN);
+ if (termios->c_cflag & CRTSCTS) {
+ fc |= RX_HW_FLOW_CTL_THLD;
+ fc |= RX_HW_FLOW_CTL_EN;
+ fc |= TX_HW_FLOW_CTL_EN;
+ }
+
+ /* clock divider bit0~bit15 */
+ serial_out(port, SPRD_CLKD0, quot & 0xffff);
+
+ /* clock divider bit16~bit20 */
+ serial_out(port, SPRD_CLKD1, (quot & 0x1f0000) >> 16);
+ serial_out(port, SPRD_LCR, lcr);
+ fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;
+ serial_out(port, SPRD_CTL1, fc);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /* Don't rewrite B0 */
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
+}
+
+static const char *sprd_type(struct uart_port *port)
+{
+ return "SPX";
+}
+
+static void sprd_release_port(struct uart_port *port)
+{
+ /* nothing to do */
+}
+
+static int sprd_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void sprd_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_SPRD;
+}
+
+static int sprd_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ if (ser->type != PORT_SPRD)
+ return -EINVAL;
+ if (port->irq != ser->irq)
+ return -EINVAL;
+ return 0;
+}
+
+static struct uart_ops serial_sprd_ops = {
+ .tx_empty = sprd_tx_empty,
+ .get_mctrl = sprd_get_mctrl,
+ .set_mctrl = sprd_set_mctrl,
+ .stop_tx = sprd_stop_tx,
+ .start_tx = sprd_start_tx,
+ .stop_rx = sprd_stop_rx,
+ .break_ctl = sprd_break_ctl,
+ .startup = sprd_startup,
+ .shutdown = sprd_shutdown,
+ .set_termios = sprd_set_termios,
+ .type = sprd_type,
+ .release_port = sprd_release_port,
+ .request_port = sprd_request_port,
+ .config_port = sprd_config_port,
+ .verify_port = sprd_verify_port,
+};
+
+#ifdef CONFIG_SERIAL_SPRD_CONSOLE
+static inline void wait_for_xmitr(struct uart_port *port)
+{
+ unsigned int status, tmout = 10000;
+
+ /* wait up to 10ms for the character(s) to be sent */
+ do {
+ status = serial_in(port, SPRD_STS1);
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while (status & 0xff00);
+}
+
+static void sprd_console_putchar(struct uart_port *port, int ch)
+{
+ wait_for_xmitr(port);
+ serial_out(port, SPRD_TXD, ch);
+}
+
+static void sprd_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct uart_port *port = &sprd_port[co->index]->port;
+ int locked = 1;
+ unsigned long flags;
+
+ if (port->sysrq)
+ locked = 0;
+ else if (oops_in_progress)
+ locked = spin_trylock_irqsave(&port->lock, flags);
+ else
+ spin_lock_irqsave(&port->lock, flags);
+
+ uart_console_write(port, s, count, sprd_console_putchar);
+
+ /* wait for transmitter to become empty */
+ wait_for_xmitr(port);
+
+ if (locked)
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int __init sprd_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index >= UART_NR_MAX || co->index < 0)
+ co->index = 0;
+
+ port = &sprd_port[co->index]->port;
+ if (port == NULL) {
+ pr_info("serial port %d not yet initialized\n", co->index);
+ return -ENODEV;
+ }
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver sprd_uart_driver;
+static struct console sprd_console = {
+ .name = SPRD_TTY_NAME,
+ .write = sprd_console_write,
+ .device = uart_console_device,
+ .setup = sprd_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &sprd_uart_driver,
+};
+
+#define SPRD_CONSOLE (&sprd_console)
+
+/* Support for earlycon */
+static void sprd_putc(struct uart_port *port, int c)
+{
+ unsigned int timeout = SPRD_TIMEOUT;
+
+ while (timeout-- &&
+ !(readl(port->membase + SPRD_LSR) & SPRD_LSR_TX_OVER))
+ cpu_relax();
+
+ writeb(c, port->membase + SPRD_TXD);
+}
+
+static void sprd_early_write(struct console *con, const char *s,
+ unsigned n)
+{
+ struct earlycon_device *dev = con->data;
+
+ uart_console_write(&dev->port, s, n, sprd_putc);
+}
+
+static int __init sprd_early_console_setup(
+ struct earlycon_device *device,
+ const char *opt)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->con->write = sprd_early_write;
+ return 0;
+}
+
+EARLYCON_DECLARE(sprd_serial, sprd_early_console_setup);
+OF_EARLYCON_DECLARE(sprd_serial, "sprd,sc9836-uart",
+ sprd_early_console_setup);
+
+#else /* !CONFIG_SERIAL_SPRD_CONSOLE */
+#define SPRD_CONSOLE NULL
+#endif
+
+static struct uart_driver sprd_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "sprd_serial",
+ .dev_name = SPRD_TTY_NAME,
+ .major = 0,
+ .minor = 0,
+ .nr = UART_NR_MAX,
+ .cons = SPRD_CONSOLE,
+};
+
+static int sprd_probe_dt_alias(int index, struct device *dev)
+{
+ struct device_node *np;
+ int ret = index;
+
+ if (!IS_ENABLED(CONFIG_OF))
+ return ret;
+
+ np = dev->of_node;
+ if (!np)
+ return ret;
+
+ ret = of_alias_get_id(np, "serial");
+ if (IS_ERR_VALUE(ret))
+ ret = index;
+ else if (ret >= ARRAY_SIZE(sprd_port) || sprd_port[ret] != NULL) {
+ dev_warn(dev, "requested serial port %d not available.\n", ret);
+ ret = index;
+ }
+
+ return ret;
+}
+
+static int sprd_remove(struct platform_device *dev)
+{
+ struct sprd_uart_port *sup = platform_get_drvdata(dev);
+
+ if (sup) {
+ uart_remove_one_port(&sprd_uart_driver, &sup->port);
+ sprd_port[sup->port.line] = NULL;
+ sprd_ports_num--;
+ }
+
+ if (!sprd_ports_num)
+ uart_unregister_driver(&sprd_uart_driver);
+
+ return 0;
+}
+
+static int sprd_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct uart_port *up;
+ struct clk *clk;
+ int irq;
+ int index;
+ int ret;
+
+ for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
+ if (sprd_port[index] == NULL)
+ break;
+
+ if (index == ARRAY_SIZE(sprd_port))
+ return -EBUSY;
+
+ index = sprd_probe_dt_alias(index, &pdev->dev);
+
+ sprd_port[index] = devm_kzalloc(&pdev->dev,
+ sizeof(*sprd_port[index]), GFP_KERNEL);
+ if (!sprd_port[index])
+ return -ENOMEM;
+
+ up = &sprd_port[index]->port;
+ up->dev = &pdev->dev;
+ up->line = index;
+ up->type = PORT_SPRD;
+ up->iotype = SERIAL_IO_PORT;
+ up->uartclk = SPRD_DEF_RATE;
+ up->fifosize = SPRD_FIFO_SIZE;
+ up->ops = &serial_sprd_ops;
+ up->flags = UPF_BOOT_AUTOCONF;
+
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(clk))
+ up->uartclk = clk_get_rate(clk);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "not provide mem resource\n");
+ return -ENODEV;
+ }
+ up->mapbase = res->start;
+ up->membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(up->membase))
+ return PTR_ERR(up->membase);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "not provide irq resource\n");
+ return -ENODEV;
+ }
+ up->irq = irq;
+
+ if (!sprd_ports_num) {
+ ret = uart_register_driver(&sprd_uart_driver);
+ if (ret < 0) {
+ pr_err("Failed to register SPRD-UART driver\n");
+ return ret;
+ }
+ }
+ sprd_ports_num++;
+
+ ret = uart_add_one_port(&sprd_uart_driver, up);
+ if (ret) {
+ sprd_port[index] = NULL;
+ sprd_remove(pdev);
+ }
+
+ platform_set_drvdata(pdev, up);
+
+ return ret;
+}
+
+static int sprd_suspend(struct device *dev)
+{
+ struct sprd_uart_port *sup = dev_get_drvdata(dev);
+
+ uart_suspend_port(&sprd_uart_driver, &sup->port);
+
+ return 0;
+}
+
+static int sprd_resume(struct device *dev)
+{
+ struct sprd_uart_port *sup = dev_get_drvdata(dev);
+
+ uart_resume_port(&sprd_uart_driver, &sup->port);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(sprd_pm_ops, sprd_suspend, sprd_resume);
+
+static const struct of_device_id serial_ids[] = {
+ {.compatible = "sprd,sc9836-uart",},
+ {}
+};
+
+static struct platform_driver sprd_platform_driver = {
+ .probe = sprd_probe,
+ .remove = sprd_remove,
+ .driver = {
+ .name = "sprd_serial",
+ .of_match_table = of_match_ptr(serial_ids),
+ .pm = &sprd_pm_ops,
+ },
+};
+
+module_platform_driver(sprd_platform_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Spreadtrum SoC serial driver series");
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 542bab37e502..cff531a51a78 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -637,10 +637,12 @@ static void cdns_uart_set_termios(struct uart_port *port,
spin_lock_irqsave(&port->lock, flags);
- /* Empty the receive FIFO 1st before making changes */
- while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) &
- CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) {
- cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
+ /* Wait for the transmit FIFO to empty before making changes */
+ if (!(cdns_uart_readl(CDNS_UART_CR_OFFSET) & CDNS_UART_CR_TX_DIS)) {
+ while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+ CDNS_UART_SR_TXEMPTY)) {
+ cpu_relax();
+ }
}
/* Disable the TX and RX to set baud rate */
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 3605103fc1ac..75661641f5fe 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -557,3 +557,9 @@ int tty_buffer_set_limit(struct tty_port *port, int limit)
return 0;
}
EXPORT_SYMBOL_GPL(tty_buffer_set_limit);
+
+/* slave ptys can claim nested buffer lock when handling BRK and INTR */
+void tty_buffer_set_lock_subclass(struct tty_port *port)
+{
+ lockdep_set_subclass(&port->buf.lock, TTY_LOCK_SLAVE);
+}
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 1787fa4d9448..a5cf253b2544 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -530,7 +530,7 @@ EXPORT_SYMBOL(tty_termios_hw_change);
* Locking: termios_rwsem
*/
-int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
+static int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
{
struct ktermios old_termios;
struct tty_ldisc *ld;
@@ -563,7 +563,6 @@ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
up_write(&tty->termios_rwsem);
return 0;
}
-EXPORT_SYMBOL_GPL(tty_set_termios);
/**
* set_termios - set termios values for a tty
diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c
index 4486741190c4..0efcf713b756 100644
--- a/drivers/tty/tty_mutex.c
+++ b/drivers/tty/tty_mutex.c
@@ -4,18 +4,8 @@
#include <linux/semaphore.h>
#include <linux/sched.h>
-/*
- * Nested tty locks are necessary for releasing pty pairs.
- * The stable lock order is master pty first, then slave pty.
- */
-
/* Legacy tty mutex glue */
-enum {
- TTY_MUTEX_NORMAL,
- TTY_MUTEX_SLAVE,
-};
-
/*
* Getting the big tty mutex.
*/
@@ -46,12 +36,8 @@ EXPORT_SYMBOL(tty_unlock);
void __lockfunc tty_lock_slave(struct tty_struct *tty)
{
- if (tty && tty != tty->link) {
- WARN_ON(!mutex_is_locked(&tty->link->legacy_mutex) ||
- !tty->driver->type == TTY_DRIVER_TYPE_PTY ||
- !tty->driver->type == PTY_TYPE_SLAVE);
+ if (tty && tty != tty->link)
tty_lock(tty);
- }
}
void __lockfunc tty_unlock_slave(struct tty_struct *tty)
@@ -62,5 +48,5 @@ void __lockfunc tty_unlock_slave(struct tty_struct *tty)
void tty_set_lock_subclass(struct tty_struct *tty)
{
- lockdep_set_subclass(&tty->legacy_mutex, TTY_MUTEX_SLAVE);
+ lockdep_set_subclass(&tty->legacy_mutex, TTY_LOCK_SLAVE);
}
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index f3fbbbca9bde..6e00572cbeb9 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -500,6 +500,7 @@ void invert_screen(struct vc_data *vc, int offset, int count, int viewed)
#endif
if (DO_UPDATE(vc))
do_update_region(vc, (unsigned long) p, count);
+ notify_update(vc);
}
/* used by selection: complement pointer position */
@@ -516,6 +517,7 @@ void complement_pos(struct vc_data *vc, int offset)
scr_writew(old, screenpos(vc, old_offset, 1));
if (DO_UPDATE(vc))
vc->vc_sw->con_putc(vc, old, oldy, oldx);
+ notify_update(vc);
}
old_offset = offset;
@@ -533,8 +535,8 @@ void complement_pos(struct vc_data *vc, int offset)
oldy = (offset >> 1) / vc->vc_cols;
vc->vc_sw->con_putc(vc, new, oldy, oldx);
}
+ notify_update(vc);
}
-
}
static void insert_char(struct vc_data *vc, unsigned int nr)
@@ -3318,11 +3320,8 @@ static int vt_bind(struct con_driver *con)
if (first == 0 && last == MAX_NR_CONSOLES -1)
deflt = 1;
- if (first != -1) {
- console_lock();
+ if (first != -1)
do_bind_con_driver(csw, first, last, deflt);
- console_unlock();
- }
first = -1;
last = -1;
@@ -3362,9 +3361,7 @@ static int vt_unbind(struct con_driver *con)
deflt = 1;
if (first != -1) {
- console_lock();
ret = do_unbind_con_driver(csw, first, last, deflt);
- console_unlock();
if (ret != 0)
return ret;
}
@@ -3394,11 +3391,15 @@ static ssize_t store_bind(struct device *dev, struct device_attribute *attr,
struct con_driver *con = dev_get_drvdata(dev);
int bind = simple_strtoul(buf, NULL, 0);
+ console_lock();
+
if (bind)
vt_bind(con);
else
vt_unbind(con);
+ console_unlock();
+
return count;
}
@@ -3665,8 +3666,7 @@ int do_unregister_con_driver(const struct consw *csw)
for (i = 0; i < MAX_NR_CON_DRIVER; i++) {
struct con_driver *con_driver = &registered_con_driver[i];
- if (con_driver->con == csw &&
- con_driver->flag & CON_DRIVER_FLAG_INIT) {
+ if (con_driver->con == csw) {
vtconsole_deinit_device(con_driver);
device_destroy(vtconsole_class,
MKDEV(0, con_driver->node));
diff --git a/include/linux/pnp.h b/include/linux/pnp.h
index 195aafc6cd07..6512e9cbc6d5 100644
--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h
@@ -12,6 +12,7 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/mod_devicetable.h>
+#include <linux/console.h>
#define PNP_NAME_LEN 50
@@ -309,15 +310,22 @@ struct pnp_fixup {
#define PNP_DISABLE 0x0004
#define PNP_CONFIGURABLE 0x0008
#define PNP_REMOVABLE 0x0010
+#define PNP_CONSOLE 0x0020
#define pnp_can_read(dev) (((dev)->protocol->get) && \
((dev)->capabilities & PNP_READ))
#define pnp_can_write(dev) (((dev)->protocol->set) && \
((dev)->capabilities & PNP_WRITE))
-#define pnp_can_disable(dev) (((dev)->protocol->disable) && \
- ((dev)->capabilities & PNP_DISABLE))
+#define pnp_can_disable(dev) (((dev)->protocol->disable) && \
+ ((dev)->capabilities & PNP_DISABLE) && \
+ (!((dev)->capabilities & PNP_CONSOLE) || \
+ console_suspend_enabled))
#define pnp_can_configure(dev) ((!(dev)->active) && \
((dev)->capabilities & PNP_CONFIGURABLE))
+#define pnp_can_suspend(dev) (((dev)->protocol->suspend) && \
+ (!((dev)->capabilities & PNP_CONSOLE) || \
+ console_suspend_enabled))
+
#ifdef CONFIG_ISAPNP
extern struct pnp_protocol isapnp_protocol;
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index e02acf0a0ec9..a8efa235b7c1 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -85,6 +85,9 @@ struct uart_8250_port {
unsigned char mcr_force; /* mask of forced bits */
unsigned char cur_iotype; /* Running I/O type */
unsigned int rpm_tx_active;
+ unsigned char canary; /* non-zero during system sleep
+ * if no_console_suspend
+ */
/*
* Some bits in registers are cleared on a read, so they must
@@ -126,6 +129,7 @@ extern int serial8250_do_startup(struct uart_port *port);
extern void serial8250_do_shutdown(struct uart_port *port);
extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate);
+extern void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl);
extern int fsl8250_handle_irq(struct uart_port *port);
int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 057038cf2788..baf3e1d08416 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -123,6 +123,7 @@ struct uart_port {
void (*set_termios)(struct uart_port *,
struct ktermios *new,
struct ktermios *old);
+ void (*set_mctrl)(struct uart_port *, unsigned int);
int (*startup)(struct uart_port *port);
void (*shutdown)(struct uart_port *port);
void (*throttle)(struct uart_port *port);
@@ -190,8 +191,10 @@ struct uart_port {
#define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15))
#define UPF_MAGIC_MULTIPLIER ((__force upf_t) ASYNC_MAGIC_MULTIPLIER /* 16 */ )
-/* Port has hardware-assisted h/w flow control (iow, auto-RTS *not* auto-CTS) */
-#define UPF_HARD_FLOW ((__force upf_t) (1 << 21))
+/* Port has hardware-assisted h/w flow control */
+#define UPF_AUTO_CTS ((__force upf_t) (1 << 20))
+#define UPF_AUTO_RTS ((__force upf_t) (1 << 21))
+#define UPF_HARD_FLOW ((__force upf_t) (UPF_AUTO_CTS | UPF_AUTO_RTS))
/* Port has hardware-assisted s/w flow control */
#define UPF_SOFT_FLOW ((__force upf_t) (1 << 22))
#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
@@ -213,11 +216,17 @@ struct uart_port {
#error Change mask not equivalent to userspace-visible bit defines
#endif
- /* status must be updated while holding port lock */
+ /*
+ * Must hold termios_rwsem, port mutex and port lock to change;
+ * can hold any one lock to read.
+ */
upstat_t status;
#define UPSTAT_CTS_ENABLE ((__force upstat_t) (1 << 0))
#define UPSTAT_DCD_ENABLE ((__force upstat_t) (1 << 1))
+#define UPSTAT_AUTORTS ((__force upstat_t) (1 << 2))
+#define UPSTAT_AUTOCTS ((__force upstat_t) (1 << 3))
+#define UPSTAT_AUTOXOFF ((__force upstat_t) (1 << 4))
int hw_stopped; /* sw-assisted CTS flow state */
unsigned int mctrl; /* current modem ctrl settings */
@@ -391,6 +400,13 @@ static inline bool uart_cts_enabled(struct uart_port *uport)
return !!(uport->status & UPSTAT_CTS_ENABLE);
}
+static inline bool uart_softcts_mode(struct uart_port *uport)
+{
+ upstat_t mask = UPSTAT_CTS_ENABLE | UPSTAT_AUTOCTS;
+
+ return ((uport->status & mask) == UPSTAT_CTS_ENABLE);
+}
+
/*
* The following are helper functions for the low level drivers.
*/
diff --git a/include/linux/serial_s3c.h b/include/linux/serial_s3c.h
index e6fc9567690b..a7f004a3c177 100644
--- a/include/linux/serial_s3c.h
+++ b/include/linux/serial_s3c.h
@@ -104,6 +104,31 @@
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI)
+#define S3C64XX_UCON_TXBURST_1 (0<<20)
+#define S3C64XX_UCON_TXBURST_4 (1<<20)
+#define S3C64XX_UCON_TXBURST_8 (2<<20)
+#define S3C64XX_UCON_TXBURST_16 (3<<20)
+#define S3C64XX_UCON_TXBURST_MASK (0xf<<20)
+#define S3C64XX_UCON_RXBURST_1 (0<<16)
+#define S3C64XX_UCON_RXBURST_4 (1<<16)
+#define S3C64XX_UCON_RXBURST_8 (2<<16)
+#define S3C64XX_UCON_RXBURST_16 (3<<16)
+#define S3C64XX_UCON_RXBURST_MASK (0xf<<16)
+#define S3C64XX_UCON_TIMEOUT_SHIFT (12)
+#define S3C64XX_UCON_TIMEOUT_MASK (0xf<<12)
+#define S3C64XX_UCON_EMPTYINT_EN (1<<11)
+#define S3C64XX_UCON_DMASUS_EN (1<<10)
+#define S3C64XX_UCON_TXINT_LEVEL (1<<9)
+#define S3C64XX_UCON_RXINT_LEVEL (1<<8)
+#define S3C64XX_UCON_TIMEOUT_EN (1<<7)
+#define S3C64XX_UCON_ERRINT_EN (1<<6)
+#define S3C64XX_UCON_TXMODE_DMA (2<<2)
+#define S3C64XX_UCON_TXMODE_CPU (1<<2)
+#define S3C64XX_UCON_TXMODE_MASK (3<<2)
+#define S3C64XX_UCON_RXMODE_DMA (2<<0)
+#define S3C64XX_UCON_RXMODE_CPU (1<<0)
+#define S3C64XX_UCON_RXMODE_MASK (3<<0)
+
#define S3C2410_UFCON_FIFOMODE (1<<0)
#define S3C2410_UFCON_TXTRIG0 (0<<6)
#define S3C2410_UFCON_RXTRIG8 (1<<4)
@@ -155,6 +180,7 @@
#define S3C2440_UFSTAT_TXMASK (63<<8)
#define S3C2440_UFSTAT_RXMASK (63)
+#define S3C2410_UTRSTAT_TIMEOUT (1<<3)
#define S3C2410_UTRSTAT_TXE (1<<2)
#define S3C2410_UTRSTAT_TXFE (1<<1)
#define S3C2410_UTRSTAT_RXDR (1<<0)
@@ -179,8 +205,10 @@
#define S3C64XX_UINTM 0x38
#define S3C64XX_UINTM_RXD (0)
+#define S3C64XX_UINTM_ERROR (1)
#define S3C64XX_UINTM_TXD (2)
#define S3C64XX_UINTM_RXD_MSK (1 << S3C64XX_UINTM_RXD)
+#define S3C64XX_UINTM_ERR_MSK (1 << S3C64XX_UINTM_ERROR)
#define S3C64XX_UINTM_TXD_MSK (1 << S3C64XX_UINTM_TXD)
/* Following are specific to S5PV210 */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 7d66ae508e5c..358a337af598 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -14,6 +14,29 @@
#include <linux/llist.h>
+/*
+ * Lock subclasses for tty locks
+ *
+ * TTY_LOCK_NORMAL is for normal ttys and master ptys.
+ * TTY_LOCK_SLAVE is for slave ptys only.
+ *
+ * Lock subclasses are necessary for handling nested locking with pty pairs.
+ * tty locks which use nested locking:
+ *
+ * legacy_mutex - Nested tty locks are necessary for releasing pty pairs.
+ * The stable lock order is master pty first, then slave pty.
+ * termios_rwsem - The stable lock order is tty_buffer lock->termios_rwsem.
+ * Subclassing this lock enables the slave pty to hold its
+ * termios_rwsem when claiming the master tty_buffer lock.
+ * tty_buffer lock - slave ptys can claim nested buffer lock when handling
+ * signal chars. The stable lock order is slave pty, then
+ * master.
+ */
+
+enum {
+ TTY_LOCK_NORMAL = 0,
+ TTY_LOCK_SLAVE,
+};
/*
* (Note: the *_driver.minor_start values 1, 64, 128, 192 are
@@ -443,6 +466,7 @@ extern void tty_flush_to_ldisc(struct tty_struct *tty);
extern void tty_buffer_free_all(struct tty_port *port);
extern void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld);
extern void tty_buffer_init(struct tty_port *port);
+extern void tty_buffer_set_lock_subclass(struct tty_port *port);
extern speed_t tty_termios_baud_rate(struct ktermios *termios);
extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
extern void tty_termios_encode_baud_rate(struct ktermios *termios,
@@ -467,7 +491,6 @@ static inline speed_t tty_get_baud_rate(struct tty_struct *tty)
extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old);
extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b);
-extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt);
extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
extern void tty_ldisc_deref(struct tty_ldisc *);
diff --git a/include/linux/vt_buffer.h b/include/linux/vt_buffer.h
index 057db7d2f448..f38c10ba3ff5 100644
--- a/include/linux/vt_buffer.h
+++ b/include/linux/vt_buffer.h
@@ -21,10 +21,6 @@
#ifndef VT_BUF_HAVE_RW
#define scr_writew(val, addr) (*(addr) = (val))
#define scr_readw(addr) (*(addr))
-#define scr_memcpyw(d, s, c) memcpy(d, s, c)
-#define scr_memmovew(d, s, c) memmove(d, s, c)
-#define VT_BUF_HAVE_MEMCPYW
-#define VT_BUF_HAVE_MEMMOVEW
#endif
#ifndef VT_BUF_HAVE_MEMSETW
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index c17218094f18..b2122813f18a 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -55,7 +55,8 @@
#define PORT_ALTR_16550_F64 27 /* Altera 16550 UART with 64 FIFOs */
#define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */
#define PORT_RT2880 29 /* Ralink RT2880 internal UART */
-#define PORT_MAX_8250 29 /* max port ID */
+#define PORT_16550A_FSL64 30 /* Freescale 16550 UART with 64 FIFOs */
+#define PORT_MAX_8250 30 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
@@ -248,4 +249,13 @@
/* MESON */
#define PORT_MESON 109
+/* Conexant Digicolor */
+#define PORT_DIGICOLOR 110
+
+/* SPRD SERIAL */
+#define PORT_SPRD 111
+
+/* Cris v10 / v32 SoC */
+#define PORT_CRIS 112
+
#endif /* _UAPILINUX_SERIAL_CORE_H */
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index 53af3b790129..00adb01fa5f3 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -86,7 +86,8 @@
#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */
#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */
#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */
-#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750) */
+#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750 and
+ some Freescale UARTs) */
#define UART_FCR_R_TRIG_SHIFT 6
#define UART_FCR_R_TRIG_BITS(x) \