summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS2
-rw-r--r--lib/Kconfig.debug27
-rw-r--r--lib/Makefile1
-rw-r--r--lib/test_kmod.c1246
-rw-r--r--tools/testing/selftests/kmod/Makefile11
-rw-r--r--tools/testing/selftests/kmod/config7
-rw-r--r--tools/testing/selftests/kmod/kmod.sh635
7 files changed, 1929 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index c917d4161427..0876084a97da 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7560,6 +7560,8 @@ L: linux-kernel@vger.kernel.org
S: Maintained
F: kernel/kmod.c
F: include/linux/kmod.h
+F: lib/test_kmod.c
+F: tools/testing/selftests/kmod/
KPROBES
M: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index b0d01c6d4e03..789c6e9e5e01 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1847,6 +1847,33 @@ config BUG_ON_DATA_CORRUPTION
If unsure, say N.
+config TEST_KMOD
+ tristate "kmod stress tester"
+ default n
+ depends on m
+ depends on BLOCK && (64BIT || LBDAF) # for XFS, BTRFS
+ depends on NETDEVICES && NET_CORE && INET # for TUN
+ select TEST_LKM
+ select XFS_FS
+ select TUN
+ select BTRFS_FS
+ help
+ Test the kernel's module loading mechanism: kmod. kmod implements
+ support to load modules using the Linux kernel's usermode helper.
+ This test provides a series of tests against kmod.
+
+ Although technically you can either build test_kmod as a module or
+ into the kernel we disallow building it into the kernel since
+ it stress tests request_module() and this will very likely cause
+ some issues by taking over precious threads available from other
+ module load requests, ultimately this could be fatal.
+
+ To run tests run:
+
+ tools/testing/selftests/kmod/kmod.sh --help
+
+ If unsure, say N.
+
source "samples/Kconfig"
source "lib/Kconfig.kgdb"
diff --git a/lib/Makefile b/lib/Makefile
index 85e91e51a9fe..40c18372b301 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_TEST_PRINTF) += test_printf.o
obj-$(CONFIG_TEST_BITMAP) += test_bitmap.o
obj-$(CONFIG_TEST_UUID) += test_uuid.o
obj-$(CONFIG_TEST_PARMAN) += test_parman.o
+obj-$(CONFIG_TEST_KMOD) += test_kmod.o
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
diff --git a/lib/test_kmod.c b/lib/test_kmod.c
new file mode 100644
index 000000000000..6c1d678bcf8b
--- /dev/null
+++ b/lib/test_kmod.c
@@ -0,0 +1,1246 @@
+/*
+ * kmod stress test driver
+ *
+ * Copyright (C) 2017 Luis R. Rodriguez <mcgrof@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or at your option any
+ * later version; or, when distributed separately from the Linux kernel or
+ * when incorporated into other software packages, subject to the following
+ * license:
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of copyleft-next (version 0.3.1 or later) as published
+ * at http://copyleft-next.org/.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+/*
+ * This driver provides an interface to trigger and test the kernel's
+ * module loader through a series of configurations and a few triggers.
+ * To test this driver use the following script as root:
+ *
+ * tools/testing/selftests/kmod/kmod.sh --help
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/printk.h>
+#include <linux/kthread.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+
+#define TEST_START_NUM_THREADS 50
+#define TEST_START_DRIVER "test_module"
+#define TEST_START_TEST_FS "xfs"
+#define TEST_START_TEST_CASE TEST_KMOD_DRIVER
+
+
+static bool force_init_test = false;
+module_param(force_init_test, bool_enable_only, 0644);
+MODULE_PARM_DESC(force_init_test,
+ "Force kicking a test immediately after driver loads");
+
+/*
+ * For device allocation / registration
+ */
+static DEFINE_MUTEX(reg_dev_mutex);
+static LIST_HEAD(reg_test_devs);
+
+/*
+ * num_test_devs actually represents the *next* ID of the next
+ * device we will allow to create.
+ */
+static int num_test_devs;
+
+/**
+ * enum kmod_test_case - linker table test case
+ *
+ * If you add a test case, please be sure to review if you need to se
+ * @need_mod_put for your tests case.
+ *
+ * @TEST_KMOD_DRIVER: stress tests request_module()
+ * @TEST_KMOD_FS_TYPE: stress tests get_fs_type()
+ */
+enum kmod_test_case {
+ __TEST_KMOD_INVALID = 0,
+
+ TEST_KMOD_DRIVER,
+ TEST_KMOD_FS_TYPE,
+
+ __TEST_KMOD_MAX,
+};
+
+struct test_config {
+ char *test_driver;
+ char *test_fs;
+ unsigned int num_threads;
+ enum kmod_test_case test_case;
+ int test_result;
+};
+
+struct kmod_test_device;
+
+/**
+ * kmod_test_device_info - thread info
+ *
+ * @ret_sync: return value if request_module() is used, sync request for
+ * @TEST_KMOD_DRIVER
+ * @fs_sync: return value of get_fs_type() for @TEST_KMOD_FS_TYPE
+ * @thread_idx: thread ID
+ * @test_dev: test device test is being performed under
+ * @need_mod_put: Some tests (get_fs_type() is one) requires putting the module
+ * (module_put(fs_sync->owner)) when done, otherwise you will not be able
+ * to unload the respective modules and re-test. We use this to keep
+ * accounting of when we need this and to help out in case we need to
+ * error out and deal with module_put() on error.
+ */
+struct kmod_test_device_info {
+ int ret_sync;
+ struct file_system_type *fs_sync;
+ struct task_struct *task_sync;
+ unsigned int thread_idx;
+ struct kmod_test_device *test_dev;
+ bool need_mod_put;
+};
+
+/**
+ * kmod_test_device - test device to help test kmod
+ *
+ * @dev_idx: unique ID for test device
+ * @config: configuration for the test
+ * @misc_dev: we use a misc device under the hood
+ * @dev: pointer to misc_dev's own struct device
+ * @config_mutex: protects configuration of test
+ * @trigger_mutex: the test trigger can only be fired once at a time
+ * @thread_lock: protects @done count, and the @info per each thread
+ * @done: number of threads which have completed or failed
+ * @test_is_oom: when we run out of memory, use this to halt moving forward
+ * @kthreads_done: completion used to signal when all work is done
+ * @list: needed to be part of the reg_test_devs
+ * @info: array of info for each thread
+ */
+struct kmod_test_device {
+ int dev_idx;
+ struct test_config config;
+ struct miscdevice misc_dev;
+ struct device *dev;
+ struct mutex config_mutex;
+ struct mutex trigger_mutex;
+ struct mutex thread_mutex;
+
+ unsigned int done;
+
+ bool test_is_oom;
+ struct completion kthreads_done;
+ struct list_head list;
+
+ struct kmod_test_device_info *info;
+};
+
+static const char *test_case_str(enum kmod_test_case test_case)
+{
+ switch (test_case) {
+ case TEST_KMOD_DRIVER:
+ return "TEST_KMOD_DRIVER";
+ case TEST_KMOD_FS_TYPE:
+ return "TEST_KMOD_FS_TYPE";
+ default:
+ return "invalid";
+ }
+}
+
+static struct miscdevice *dev_to_misc_dev(struct device *dev)
+{
+ return dev_get_drvdata(dev);
+}
+
+static struct kmod_test_device *misc_dev_to_test_dev(struct miscdevice *misc_dev)
+{
+ return container_of(misc_dev, struct kmod_test_device, misc_dev);
+}
+
+static struct kmod_test_device *dev_to_test_dev(struct device *dev)
+{
+ struct miscdevice *misc_dev;
+
+ misc_dev = dev_to_misc_dev(dev);
+
+ return misc_dev_to_test_dev(misc_dev);
+}
+
+/* Must run with thread_mutex held */
+static void kmod_test_done_check(struct kmod_test_device *test_dev,
+ unsigned int idx)
+{
+ struct test_config *config = &test_dev->config;
+
+ test_dev->done++;
+ dev_dbg(test_dev->dev, "Done thread count: %u\n", test_dev->done);
+
+ if (test_dev->done == config->num_threads) {
+ dev_info(test_dev->dev, "Done: %u threads have all run now\n",
+ test_dev->done);
+ dev_info(test_dev->dev, "Last thread to run: %u\n", idx);
+ complete(&test_dev->kthreads_done);
+ }
+}
+
+static void test_kmod_put_module(struct kmod_test_device_info *info)
+{
+ struct kmod_test_device *test_dev = info->test_dev;
+ struct test_config *config = &test_dev->config;
+
+ if (!info->need_mod_put)
+ return;
+
+ switch (config->test_case) {
+ case TEST_KMOD_DRIVER:
+ break;
+ case TEST_KMOD_FS_TYPE:
+ if (info && info->fs_sync && info->fs_sync->owner)
+ module_put(info->fs_sync->owner);
+ break;
+ default:
+ BUG();
+ }
+
+ info->need_mod_put = true;
+}
+
+static int run_request(void *data)
+{
+ struct kmod_test_device_info *info = data;
+ struct kmod_test_device *test_dev = info->test_dev;
+ struct test_config *config = &test_dev->config;
+
+ switch (config->test_case) {
+ case TEST_KMOD_DRIVER:
+ info->ret_sync = request_module("%s", config->test_driver);
+ break;
+ case TEST_KMOD_FS_TYPE:
+ info->fs_sync = get_fs_type(config->test_fs);
+ info->need_mod_put = true;
+ break;
+ default:
+ /* __trigger_config_run() already checked for test sanity */
+ BUG();
+ return -EINVAL;
+ }
+
+ dev_dbg(test_dev->dev, "Ran thread %u\n", info->thread_idx);
+
+ test_kmod_put_module(info);
+
+ mutex_lock(&test_dev->thread_mutex);
+ info->task_sync = NULL;
+ kmod_test_done_check(test_dev, info->thread_idx);
+ mutex_unlock(&test_dev->thread_mutex);
+
+ return 0;
+}
+
+static int tally_work_test(struct kmod_test_device_info *info)
+{
+ struct kmod_test_device *test_dev = info->test_dev;
+ struct test_config *config = &test_dev->config;
+ int err_ret = 0;
+
+ switch (config->test_case) {
+ case TEST_KMOD_DRIVER:
+ /*
+ * Only capture errors, if one is found that's
+ * enough, for now.
+ */
+ if (info->ret_sync != 0)
+ err_ret = info->ret_sync;
+ dev_info(test_dev->dev,
+ "Sync thread %d return status: %d\n",
+ info->thread_idx, info->ret_sync);
+ break;
+ case TEST_KMOD_FS_TYPE:
+ /* For now we make this simple */
+ if (!info->fs_sync)
+ err_ret = -EINVAL;
+ dev_info(test_dev->dev, "Sync thread %u fs: %s\n",
+ info->thread_idx, info->fs_sync ? config->test_fs :
+ "NULL");
+ break;
+ default:
+ BUG();
+ }
+
+ return err_ret;
+}
+
+/*
+ * XXX: add result option to display if all errors did not match.
+ * For now we just keep any error code if one was found.
+ *
+ * If this ran it means *all* tasks were created fine and we
+ * are now just collecting results.
+ *
+ * Only propagate errors, do not override with a subsequent sucess case.
+ */
+static void tally_up_work(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+ struct kmod_test_device_info *info;
+ unsigned int idx;
+ int err_ret = 0;
+ int ret = 0;
+
+ mutex_lock(&test_dev->thread_mutex);
+
+ dev_info(test_dev->dev, "Results:\n");
+
+ for (idx=0; idx < config->num_threads; idx++) {
+ info = &test_dev->info[idx];
+ ret = tally_work_test(info);
+ if (ret)
+ err_ret = ret;
+ }
+
+ /*
+ * Note: request_module() returns 256 for a module not found even
+ * though modprobe itself returns 1.
+ */
+ config->test_result = err_ret;
+
+ mutex_unlock(&test_dev->thread_mutex);
+}
+
+static int try_one_request(struct kmod_test_device *test_dev, unsigned int idx)
+{
+ struct kmod_test_device_info *info = &test_dev->info[idx];
+ int fail_ret = -ENOMEM;
+
+ mutex_lock(&test_dev->thread_mutex);
+
+ info->thread_idx = idx;
+ info->test_dev = test_dev;
+ info->task_sync = kthread_run(run_request, info, "%s-%u",
+ KBUILD_MODNAME, idx);
+
+ if (!info->task_sync || IS_ERR(info->task_sync)) {
+ test_dev->test_is_oom = true;
+ dev_err(test_dev->dev, "Setting up thread %u failed\n", idx);
+ info->task_sync = NULL;
+ goto err_out;
+ } else
+ dev_dbg(test_dev->dev, "Kicked off thread %u\n", idx);
+
+ mutex_unlock(&test_dev->thread_mutex);
+
+ return 0;
+
+err_out:
+ info->ret_sync = fail_ret;
+ mutex_unlock(&test_dev->thread_mutex);
+
+ return fail_ret;
+}
+
+static void test_dev_kmod_stop_tests(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+ struct kmod_test_device_info *info;
+ unsigned int i;
+
+ dev_info(test_dev->dev, "Ending request_module() tests\n");
+
+ mutex_lock(&test_dev->thread_mutex);
+
+ for (i=0; i < config->num_threads; i++) {
+ info = &test_dev->info[i];
+ if (info->task_sync && !IS_ERR(info->task_sync)) {
+ dev_info(test_dev->dev,
+ "Stopping still-running thread %i\n", i);
+ kthread_stop(info->task_sync);
+ }
+
+ /*
+ * info->task_sync is well protected, it can only be
+ * NULL or a pointer to a struct. If its NULL we either
+ * never ran, or we did and we completed the work. Completed
+ * tasks *always* put the module for us. This is a sanity
+ * check -- just in case.
+ */
+ if (info->task_sync && info->need_mod_put)
+ test_kmod_put_module(info);
+ }
+
+ mutex_unlock(&test_dev->thread_mutex);
+}
+
+/*
+ * Only wait *iff* we did not run into any errors during all of our thread
+ * set up. If run into any issues we stop threads and just bail out with
+ * an error to the trigger. This also means we don't need any tally work
+ * for any threads which fail.
+ */
+static int try_requests(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+ unsigned int idx;
+ int ret;
+ bool any_error = false;
+
+ for (idx=0; idx < config->num_threads; idx++) {
+ if (test_dev->test_is_oom) {
+ any_error = true;
+ break;
+ }
+
+ ret = try_one_request(test_dev, idx);
+ if (ret) {
+ any_error = true;
+ break;
+ }
+ }
+
+ if (!any_error) {
+ test_dev->test_is_oom = false;
+ dev_info(test_dev->dev,
+ "No errors were found while initializing threads\n");
+ wait_for_completion(&test_dev->kthreads_done);
+ tally_up_work(test_dev);
+ } else {
+ test_dev->test_is_oom = true;
+ dev_info(test_dev->dev,
+ "At least one thread failed to start, stop all work\n");
+ test_dev_kmod_stop_tests(test_dev);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int run_test_driver(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+
+ dev_info(test_dev->dev, "Test case: %s (%u)\n",
+ test_case_str(config->test_case),
+ config->test_case);
+ dev_info(test_dev->dev, "Test driver to load: %s\n",
+ config->test_driver);
+ dev_info(test_dev->dev, "Number of threads to run: %u\n",
+ config->num_threads);
+ dev_info(test_dev->dev, "Thread IDs will range from 0 - %u\n",
+ config->num_threads - 1);
+
+ return try_requests(test_dev);
+}
+
+static int run_test_fs_type(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+
+ dev_info(test_dev->dev, "Test case: %s (%u)\n",
+ test_case_str(config->test_case),
+ config->test_case);
+ dev_info(test_dev->dev, "Test filesystem to load: %s\n",
+ config->test_fs);
+ dev_info(test_dev->dev, "Number of threads to run: %u\n",
+ config->num_threads);
+ dev_info(test_dev->dev, "Thread IDs will range from 0 - %u\n",
+ config->num_threads - 1);
+
+ return try_requests(test_dev);
+}
+
+static ssize_t config_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+ int len = 0;
+
+ mutex_lock(&test_dev->config_mutex);
+
+ len += snprintf(buf, PAGE_SIZE,
+ "Custom trigger configuration for: %s\n",
+ dev_name(dev));
+
+ len += snprintf(buf+len, PAGE_SIZE - len,
+ "Number of threads:\t%u\n",
+ config->num_threads);
+
+ len += snprintf(buf+len, PAGE_SIZE - len,
+ "Test_case:\t%s (%u)\n",
+ test_case_str(config->test_case),
+ config->test_case);
+
+ if (config->test_driver)
+ len += snprintf(buf+len, PAGE_SIZE - len,
+ "driver:\t%s\n",
+ config->test_driver);
+ else
+ len += snprintf(buf+len, PAGE_SIZE - len,
+ "driver:\tEMTPY\n");
+
+ if (config->test_fs)
+ len += snprintf(buf+len, PAGE_SIZE - len,
+ "fs:\t%s\n",
+ config->test_fs);
+ else
+ len += snprintf(buf+len, PAGE_SIZE - len,
+ "fs:\tEMTPY\n");
+
+ mutex_unlock(&test_dev->config_mutex);
+
+ return len;
+}
+static DEVICE_ATTR_RO(config);
+
+/*
+ * This ensures we don't allow kicking threads through if our configuration
+ * is faulty.
+ */
+static int __trigger_config_run(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+
+ test_dev->done = 0;
+
+ switch (config->test_case) {
+ case TEST_KMOD_DRIVER:
+ return run_test_driver(test_dev);
+ case TEST_KMOD_FS_TYPE:
+ return run_test_fs_type(test_dev);
+ default:
+ dev_warn(test_dev->dev,
+ "Invalid test case requested: %u\n",
+ config->test_case);
+ return -EINVAL;
+ }
+}
+
+static int trigger_config_run(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+ int ret;
+
+ mutex_lock(&test_dev->trigger_mutex);
+ mutex_lock(&test_dev->config_mutex);
+
+ ret = __trigger_config_run(test_dev);
+ if (ret < 0)
+ goto out;
+ dev_info(test_dev->dev, "General test result: %d\n",
+ config->test_result);
+
+ /*
+ * We must return 0 after a trigger even unless something went
+ * wrong with the setup of the test. If the test setup went fine
+ * then userspace must just check the result of config->test_result.
+ * One issue with relying on the return from a call in the kernel
+ * is if the kernel returns a possitive value using this trigger
+ * will not return the value to userspace, it would be lost.
+ *
+ * By not relying on capturing the return value of tests we are using
+ * through the trigger it also us to run tests with set -e and only
+ * fail when something went wrong with the driver upon trigger
+ * requests.
+ */
+ ret = 0;
+
+out:
+ mutex_unlock(&test_dev->config_mutex);
+ mutex_unlock(&test_dev->trigger_mutex);
+
+ return ret;
+}
+
+static ssize_t
+trigger_config_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ int ret;
+
+ if (test_dev->test_is_oom)
+ return -ENOMEM;
+
+ /* For all intents and purposes we don't care what userspace
+ * sent this trigger, we care only that we were triggered.
+ * We treat the return value only for caputuring issues with
+ * the test setup. At this point all the test variables should
+ * have been allocated so typically this should never fail.
+ */
+ ret = trigger_config_run(test_dev);
+ if (unlikely(ret < 0))
+ goto out;
+
+ /*
+ * Note: any return > 0 will be treated as success
+ * and the error value will not be available to userspace.
+ * Do not rely on trying to send to userspace a test value
+ * return value as possitive return errors will be lost.
+ */
+ if (WARN_ON(ret > 0))
+ return -EINVAL;
+
+ ret = count;
+out:
+ return ret;
+}
+static DEVICE_ATTR_WO(trigger_config);
+
+/*
+ * XXX: move to kstrncpy() once merged.
+ *
+ * Users should use kfree_const() when freeing these.
+ */
+static int __kstrncpy(char **dst, const char *name, size_t count, gfp_t gfp)
+{
+ *dst = kstrndup(name, count, gfp);
+ if (!*dst)
+ return -ENOSPC;
+ return count;
+}
+
+static int config_copy_test_driver_name(struct test_config *config,
+ const char *name,
+ size_t count)
+{
+ return __kstrncpy(&config->test_driver, name, count, GFP_KERNEL);
+}
+
+
+static int config_copy_test_fs(struct test_config *config, const char *name,
+ size_t count)
+{
+ return __kstrncpy(&config->test_fs, name, count, GFP_KERNEL);
+}
+
+static void __kmod_config_free(struct test_config *config)
+{
+ if (!config)
+ return;
+
+ kfree_const(config->test_driver);
+ config->test_driver = NULL;
+
+ kfree_const(config->test_fs);
+ config->test_driver = NULL;
+}
+
+static void kmod_config_free(struct kmod_test_device *test_dev)
+{
+ struct test_config *config;
+
+ if (!test_dev)
+ return;
+
+ config = &test_dev->config;
+
+ mutex_lock(&test_dev->config_mutex);
+ __kmod_config_free(config);
+ mutex_unlock(&test_dev->config_mutex);
+}
+
+static ssize_t config_test_driver_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+ int copied;
+
+ mutex_lock(&test_dev->config_mutex);
+
+ kfree_const(config->test_driver);
+ config->test_driver = NULL;
+
+ copied = config_copy_test_driver_name(config, buf, count);
+ mutex_unlock(&test_dev->config_mutex);
+
+ return copied;
+}
+
+/*
+ * As per sysfs_kf_seq_show() the buf is max PAGE_SIZE.
+ */
+static ssize_t config_test_show_str(struct mutex *config_mutex,
+ char *dst,
+ char *src)
+{
+ int len;
+
+ mutex_lock(config_mutex);
+ len = snprintf(dst, PAGE_SIZE, "%s\n", src);
+ mutex_unlock(config_mutex);
+
+ return len;
+}
+
+static ssize_t config_test_driver_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+
+ return config_test_show_str(&test_dev->config_mutex, buf,
+ config->test_driver);
+}
+static DEVICE_ATTR(config_test_driver, 0644, config_test_driver_show,
+ config_test_driver_store);
+
+static ssize_t config_test_fs_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+ int copied;
+
+ mutex_lock(&test_dev->config_mutex);
+
+ kfree_const(config->test_fs);
+ config->test_fs = NULL;
+
+ copied = config_copy_test_fs(config, buf, count);
+ mutex_unlock(&test_dev->config_mutex);
+
+ return copied;
+}
+
+static ssize_t config_test_fs_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+
+ return config_test_show_str(&test_dev->config_mutex, buf,
+ config->test_fs);
+}
+static DEVICE_ATTR(config_test_fs, 0644, config_test_fs_show,
+ config_test_fs_store);
+
+static int trigger_config_run_type(struct kmod_test_device *test_dev,
+ enum kmod_test_case test_case,
+ const char *test_str)
+{
+ int copied = 0;
+ struct test_config *config = &test_dev->config;
+
+ mutex_lock(&test_dev->config_mutex);
+
+ switch (test_case) {
+ case TEST_KMOD_DRIVER:
+ kfree_const(config->test_driver);
+ config->test_driver = NULL;
+ copied = config_copy_test_driver_name(config, test_str,
+ strlen(test_str));
+ break;
+ case TEST_KMOD_FS_TYPE:
+ break;
+ kfree_const(config->test_fs);
+ config->test_driver = NULL;
+ copied = config_copy_test_fs(config, test_str,
+ strlen(test_str));
+ default:
+ mutex_unlock(&test_dev->config_mutex);
+ return -EINVAL;
+ }
+
+ config->test_case = test_case;
+
+ mutex_unlock(&test_dev->config_mutex);
+
+ if (copied <= 0 || copied != strlen(test_str)) {
+ test_dev->test_is_oom = true;
+ return -ENOMEM;
+ }
+
+ test_dev->test_is_oom = false;
+
+ return trigger_config_run(test_dev);
+}
+
+static void free_test_dev_info(struct kmod_test_device *test_dev)
+{
+ vfree(test_dev->info);
+ test_dev->info = NULL;
+}
+
+static int kmod_config_sync_info(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+
+ free_test_dev_info(test_dev);
+ test_dev->info = vzalloc(config->num_threads *
+ sizeof(struct kmod_test_device_info));
+ if (!test_dev->info) {
+ dev_err(test_dev->dev, "Cannot alloc test_dev info\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/*
+ * Old kernels may not have this, if you want to port this code to
+ * test it on older kernels.
+ */
+#ifdef get_kmod_umh_limit
+static unsigned int kmod_init_test_thread_limit(void)
+{
+ return get_kmod_umh_limit();
+}
+#else
+static unsigned int kmod_init_test_thread_limit(void)
+{
+ return TEST_START_NUM_THREADS;
+}
+#endif
+
+static int __kmod_config_init(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+ int ret = -ENOMEM, copied;
+
+ __kmod_config_free(config);
+
+ copied = config_copy_test_driver_name(config, TEST_START_DRIVER,
+ strlen(TEST_START_DRIVER));
+ if (copied != strlen(TEST_START_DRIVER))
+ goto err_out;
+
+ copied = config_copy_test_fs(config, TEST_START_TEST_FS,
+ strlen(TEST_START_TEST_FS));
+ if (copied != strlen(TEST_START_TEST_FS))
+ goto err_out;
+
+ config->num_threads = kmod_init_test_thread_limit();
+ config->test_result = 0;
+ config->test_case = TEST_START_TEST_CASE;
+
+ ret = kmod_config_sync_info(test_dev);
+ if (ret)
+ goto err_out;
+
+ test_dev->test_is_oom = false;
+
+ return 0;
+
+err_out:
+ test_dev->test_is_oom = true;
+ WARN_ON(test_dev->test_is_oom);
+
+ __kmod_config_free(config);
+
+ return ret;
+}
+
+static ssize_t reset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ int ret;
+
+ mutex_lock(&test_dev->trigger_mutex);
+ mutex_lock(&test_dev->config_mutex);
+
+ ret = __kmod_config_init(test_dev);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ dev_err(dev, "could not alloc settings for config trigger: %d\n",
+ ret);
+ goto out;
+ }
+
+ dev_info(dev, "reset\n");
+ ret = count;
+
+out:
+ mutex_unlock(&test_dev->config_mutex);
+ mutex_unlock(&test_dev->trigger_mutex);
+
+ return ret;
+}
+static DEVICE_ATTR_WO(reset);
+
+static int test_dev_config_update_uint_sync(struct kmod_test_device *test_dev,
+ const char *buf, size_t size,
+ unsigned int *config,
+ int (*test_sync)(struct kmod_test_device *test_dev))
+{
+ int ret;
+ long new;
+ unsigned int old_val;
+
+ ret = kstrtol(buf, 10, &new);
+ if (ret)
+ return ret;
+
+ if (new > UINT_MAX)
+ return -EINVAL;
+
+ mutex_lock(&test_dev->config_mutex);
+
+ old_val = *config;
+ *(unsigned int *)config = new;
+
+ ret = test_sync(test_dev);
+ if (ret) {
+ *(unsigned int *)config = old_val;
+
+ ret = test_sync(test_dev);
+ WARN_ON(ret);
+
+ mutex_unlock(&test_dev->config_mutex);
+ return -EINVAL;
+ }
+
+ mutex_unlock(&test_dev->config_mutex);
+ /* Always return full write size even if we didn't consume all */
+ return size;
+}
+
+static int test_dev_config_update_uint_range(struct kmod_test_device *test_dev,
+ const char *buf, size_t size,
+ unsigned int *config,
+ unsigned int min,
+ unsigned int max)
+{
+ int ret;
+ long new;
+
+ ret = kstrtol(buf, 10, &new);
+ if (ret)
+ return ret;
+
+ if (new < min || new > max || new > UINT_MAX)
+ return -EINVAL;
+
+ mutex_lock(&test_dev->config_mutex);
+ *config = new;
+ mutex_unlock(&test_dev->config_mutex);
+
+ /* Always return full write size even if we didn't consume all */
+ return size;
+}
+
+static int test_dev_config_update_int(struct kmod_test_device *test_dev,
+ const char *buf, size_t size,
+ int *config)
+{
+ int ret;
+ long new;
+
+ ret = kstrtol(buf, 10, &new);
+ if (ret)
+ return ret;
+
+ if (new > INT_MAX || new < INT_MIN)
+ return -EINVAL;
+
+ mutex_lock(&test_dev->config_mutex);
+ *config = new;
+ mutex_unlock(&test_dev->config_mutex);
+ /* Always return full write size even if we didn't consume all */
+ return size;
+}
+
+static ssize_t test_dev_config_show_int(struct kmod_test_device *test_dev,
+ char *buf,
+ int config)
+{
+ int val;
+
+ mutex_lock(&test_dev->config_mutex);
+ val = config;
+ mutex_unlock(&test_dev->config_mutex);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t test_dev_config_show_uint(struct kmod_test_device *test_dev,
+ char *buf,
+ unsigned int config)
+{
+ unsigned int val;
+
+ mutex_lock(&test_dev->config_mutex);
+ val = config;
+ mutex_unlock(&test_dev->config_mutex);
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t test_result_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+
+ return test_dev_config_update_int(test_dev, buf, count,
+ &config->test_result);
+}
+
+static ssize_t config_num_threads_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+
+ return test_dev_config_update_uint_sync(test_dev, buf, count,
+ &config->num_threads,
+ kmod_config_sync_info);
+}
+
+static ssize_t config_num_threads_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+
+ return test_dev_config_show_int(test_dev, buf, config->num_threads);
+}
+static DEVICE_ATTR(config_num_threads, 0644, config_num_threads_show,
+ config_num_threads_store);
+
+static ssize_t config_test_case_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+
+ return test_dev_config_update_uint_range(test_dev, buf, count,
+ &config->test_case,
+ __TEST_KMOD_INVALID + 1,
+ __TEST_KMOD_MAX - 1);
+}
+
+static ssize_t config_test_case_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+
+ return test_dev_config_show_uint(test_dev, buf, config->test_case);
+}
+static DEVICE_ATTR(config_test_case, 0644, config_test_case_show,
+ config_test_case_store);
+
+static ssize_t test_result_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+
+ return test_dev_config_show_int(test_dev, buf, config->test_result);
+}
+static DEVICE_ATTR(test_result, 0644, test_result_show, test_result_store);
+
+#define TEST_KMOD_DEV_ATTR(name) &dev_attr_##name.attr
+
+static struct attribute *test_dev_attrs[] = {
+ TEST_KMOD_DEV_ATTR(trigger_config),
+ TEST_KMOD_DEV_ATTR(config),
+ TEST_KMOD_DEV_ATTR(reset),
+
+ TEST_KMOD_DEV_ATTR(config_test_driver),
+ TEST_KMOD_DEV_ATTR(config_test_fs),
+ TEST_KMOD_DEV_ATTR(config_num_threads),
+ TEST_KMOD_DEV_ATTR(config_test_case),
+ TEST_KMOD_DEV_ATTR(test_result),
+
+ NULL,
+};
+
+ATTRIBUTE_GROUPS(test_dev);
+
+static int kmod_config_init(struct kmod_test_device *test_dev)
+{
+ int ret;
+
+ mutex_lock(&test_dev->config_mutex);
+ ret = __kmod_config_init(test_dev);
+ mutex_unlock(&test_dev->config_mutex);
+
+ return ret;
+}
+
+static struct kmod_test_device *alloc_test_dev_kmod(int idx)
+{
+ int ret;
+ struct kmod_test_device *test_dev;
+ struct miscdevice *misc_dev;
+
+ test_dev = vzalloc(sizeof(struct kmod_test_device));
+ if (!test_dev) {
+ pr_err("Cannot alloc test_dev\n");
+ goto err_out;
+ }
+
+ mutex_init(&test_dev->config_mutex);
+ mutex_init(&test_dev->trigger_mutex);
+ mutex_init(&test_dev->thread_mutex);
+
+ init_completion(&test_dev->kthreads_done);
+
+ ret = kmod_config_init(test_dev);
+ if (ret < 0) {
+ pr_err("Cannot alloc kmod_config_init()\n");
+ goto err_out_free;
+ }
+
+ test_dev->dev_idx = idx;
+ misc_dev = &test_dev->misc_dev;
+
+ misc_dev->minor = MISC_DYNAMIC_MINOR;
+ misc_dev->name = kasprintf(GFP_KERNEL, "test_kmod%d", idx);
+ if (!misc_dev->name) {
+ pr_err("Cannot alloc misc_dev->name\n");
+ goto err_out_free_config;
+ }
+ misc_dev->groups = test_dev_groups;
+
+ return test_dev;
+
+err_out_free_config:
+ free_test_dev_info(test_dev);
+ kmod_config_free(test_dev);
+err_out_free:
+ vfree(test_dev);
+ test_dev = NULL;
+err_out:
+ return NULL;
+}
+
+static void free_test_dev_kmod(struct kmod_test_device *test_dev)
+{
+ if (test_dev) {
+ kfree_const(test_dev->misc_dev.name);
+ test_dev->misc_dev.name = NULL;
+ free_test_dev_info(test_dev);
+ kmod_config_free(test_dev);
+ vfree(test_dev);
+ test_dev = NULL;
+ }
+}
+
+static struct kmod_test_device *register_test_dev_kmod(void)
+{
+ struct kmod_test_device *test_dev = NULL;
+ int ret;
+
+ mutex_unlock(&reg_dev_mutex);
+
+ /* int should suffice for number of devices, test for wrap */
+ if (unlikely(num_test_devs + 1) < 0) {
+ pr_err("reached limit of number of test devices\n");
+ goto out;
+ }
+
+ test_dev = alloc_test_dev_kmod(num_test_devs);
+ if (!test_dev)
+ goto out;
+
+ ret = misc_register(&test_dev->misc_dev);
+ if (ret) {
+ pr_err("could not register misc device: %d\n", ret);
+ free_test_dev_kmod(test_dev);
+ goto out;
+ }
+
+ test_dev->dev = test_dev->misc_dev.this_device;
+ list_add_tail(&test_dev->list, &reg_test_devs);
+ dev_info(test_dev->dev, "interface ready\n");
+
+ num_test_devs++;
+
+out:
+ mutex_unlock(&reg_dev_mutex);
+
+ return test_dev;
+
+}
+
+static int __init test_kmod_init(void)
+{
+ struct kmod_test_device *test_dev;
+ int ret;
+
+ test_dev = register_test_dev_kmod();
+ if (!test_dev) {
+ pr_err("Cannot add first test kmod device\n");
+ return -ENODEV;
+ }
+
+ /*
+ * With some work we might be able to gracefully enable
+ * testing with this driver built-in, for now this seems
+ * rather risky. For those willing to try have at it,
+ * and enable the below. Good luck! If that works, try
+ * lowering the init level for more fun.
+ */
+ if (force_init_test) {
+ ret = trigger_config_run_type(test_dev,
+ TEST_KMOD_DRIVER, "tun");
+ if (WARN_ON(ret))
+ return ret;
+ ret = trigger_config_run_type(test_dev,
+ TEST_KMOD_FS_TYPE, "btrfs");
+ if (WARN_ON(ret))
+ return ret;
+ }
+
+ return 0;
+}
+late_initcall(test_kmod_init);
+
+static
+void unregister_test_dev_kmod(struct kmod_test_device *test_dev)
+{
+ mutex_lock(&test_dev->trigger_mutex);
+ mutex_lock(&test_dev->config_mutex);
+
+ test_dev_kmod_stop_tests(test_dev);
+
+ dev_info(test_dev->dev, "removing interface\n");
+ misc_deregister(&test_dev->misc_dev);
+ kfree(&test_dev->misc_dev.name);
+
+ mutex_unlock(&test_dev->config_mutex);
+ mutex_unlock(&test_dev->trigger_mutex);
+
+ free_test_dev_kmod(test_dev);
+}
+
+static void __exit test_kmod_exit(void)
+{
+ struct kmod_test_device *test_dev, *tmp;
+
+ mutex_lock(&reg_dev_mutex);
+ list_for_each_entry_safe(test_dev, tmp, &reg_test_devs, list) {
+ list_del(&test_dev->list);
+ unregister_test_dev_kmod(test_dev);
+ }
+ mutex_unlock(&reg_dev_mutex);
+}
+module_exit(test_kmod_exit);
+
+MODULE_AUTHOR("Luis R. Rodriguez <mcgrof@kernel.org>");
+MODULE_LICENSE("GPL");
diff --git a/tools/testing/selftests/kmod/Makefile b/tools/testing/selftests/kmod/Makefile
new file mode 100644
index 000000000000..fa2ccc5fb3de
--- /dev/null
+++ b/tools/testing/selftests/kmod/Makefile
@@ -0,0 +1,11 @@
+# Makefile for kmod loading selftests
+
+# No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
+all:
+
+TEST_PROGS := kmod.sh
+
+include ../lib.mk
+
+# Nothing to clean up.
+clean:
diff --git a/tools/testing/selftests/kmod/config b/tools/testing/selftests/kmod/config
new file mode 100644
index 000000000000..259f4fd6b5e2
--- /dev/null
+++ b/tools/testing/selftests/kmod/config
@@ -0,0 +1,7 @@
+CONFIG_TEST_KMOD=m
+CONFIG_TEST_LKM=m
+CONFIG_XFS_FS=m
+
+# For the module parameter force_init_test is used
+CONFIG_TUN=m
+CONFIG_BTRFS_FS=m
diff --git a/tools/testing/selftests/kmod/kmod.sh b/tools/testing/selftests/kmod/kmod.sh
new file mode 100644
index 000000000000..10196a62ed09
--- /dev/null
+++ b/tools/testing/selftests/kmod/kmod.sh
@@ -0,0 +1,635 @@
+#!/bin/bash
+#
+# Copyright (C) 2017 Luis R. Rodriguez <mcgrof@kernel.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2 of the License, or at your option any
+# later version; or, when distributed separately from the Linux kernel or
+# when incorporated into other software packages, subject to the following
+# license:
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of copyleft-next (version 0.3.1 or later) as published
+# at http://copyleft-next.org/.
+
+# This is a stress test script for kmod, the kernel module loader. It uses
+# test_kmod which exposes a series of knobs for the API for us so we can
+# tweak each test in userspace rather than in kernelspace.
+#
+# The way kmod works is it uses the kernel's usermode helper API to eventually
+# call /sbin/modprobe. It has a limit of the number of concurrent calls
+# possible. The kernel interface to load modules is request_module(), however
+# mount uses get_fs_type(). Both behave slightly differently, but the
+# differences are important enough to test each call separately. For this
+# reason test_kmod starts by providing tests for both calls.
+#
+# The test driver test_kmod assumes a series of defaults which you can
+# override by exporting to your environment prior running this script.
+# For instance this script assumes you do not have xfs loaded upon boot.
+# If this is false, export DEFAULT_KMOD_FS="ext4" prior to running this
+# script if the filesyste module you don't have loaded upon bootup
+# is ext4 instead. Refer to allow_user_defaults() for a list of user
+# override variables possible.
+#
+# You'll want at least 4 GiB of RAM to expect to run these tests
+# without running out of memory on them. For other requirements refer
+# to test_reqs()
+
+set -e
+
+TEST_NAME="kmod"
+TEST_DRIVER="test_${TEST_NAME}"
+TEST_DIR=$(dirname $0)
+
+# This represents
+#
+# TEST_ID:TEST_COUNT:ENABLED
+#
+# TEST_ID: is the test id number
+# TEST_COUNT: number of times we should run the test
+# ENABLED: 1 if enabled, 0 otherwise
+#
+# Once these are enabled please leave them as-is. Write your own test,
+# we have tons of space.
+ALL_TESTS="0001:3:1"
+ALL_TESTS="$ALL_TESTS 0002:3:1"
+ALL_TESTS="$ALL_TESTS 0003:1:1"
+ALL_TESTS="$ALL_TESTS 0004:1:1"
+ALL_TESTS="$ALL_TESTS 0005:10:1"
+ALL_TESTS="$ALL_TESTS 0006:10:1"
+ALL_TESTS="$ALL_TESTS 0007:5:1"
+
+# Disabled tests:
+#
+# 0008 x 150 - multithreaded - push kmod_concurrent over max_modprobes for request_module()"
+# Current best-effort failure interpretation:
+# Enough module requests get loaded in place fast enough to reach over the
+# max_modprobes limit and trigger a failure -- before we're even able to
+# start processing pending requests.
+ALL_TESTS="$ALL_TESTS 0008:150:0"
+
+# 0009 x 150 - multithreaded - push kmod_concurrent over max_modprobes for get_fs_type()"
+# Current best-effort failure interpretation:
+#
+# get_fs_type() requests modules using aliases as such the optimization in
+# place today to look for already loaded modules will not take effect and
+# we end up requesting a new module to load, this bumps the kmod_concurrent,
+# and in certain circumstances can lead to pushing the kmod_concurrent over
+# the max_modprobe limit.
+#
+# This test fails much easier than test 0008 since the alias optimizations
+# are not in place.
+ALL_TESTS="$ALL_TESTS 0009:150:0"
+
+test_modprobe()
+{
+ if [ ! -d $DIR ]; then
+ echo "$0: $DIR not present" >&2
+ echo "You must have the following enabled in your kernel:" >&2
+ cat $TEST_DIR/config >&2
+ exit 1
+ fi
+}
+
+function allow_user_defaults()
+{
+ if [ -z $DEFAULT_KMOD_DRIVER ]; then
+ DEFAULT_KMOD_DRIVER="test_module"
+ fi
+
+ if [ -z $DEFAULT_KMOD_FS ]; then
+ DEFAULT_KMOD_FS="xfs"
+ fi
+
+ if [ -z $PROC_DIR ]; then
+ PROC_DIR="/proc/sys/kernel/"
+ fi
+
+ if [ -z $MODPROBE_LIMIT ]; then
+ MODPROBE_LIMIT=50
+ fi
+
+ if [ -z $DIR ]; then
+ DIR="/sys/devices/virtual/misc/${TEST_DRIVER}0/"
+ fi
+
+ if [ -z $DEFAULT_NUM_TESTS ]; then
+ DEFAULT_NUM_TESTS=150
+ fi
+
+ MODPROBE_LIMIT_FILE="${PROC_DIR}/kmod-limit"
+}
+
+test_reqs()
+{
+ if ! which modprobe 2> /dev/null > /dev/null; then
+ echo "$0: You need modprobe installed" >&2
+ exit 1
+ fi
+
+ if ! which kmod 2> /dev/null > /dev/null; then
+ echo "$0: You need kmod installed" >&2
+ exit 1
+ fi
+
+ # kmod 19 has a bad bug where it returns 0 when modprobe
+ # gets called *even* if the module was not loaded due to
+ # some bad heuristics. For details see:
+ #
+ # A work around is possible in-kernel but its rather
+ # complex.
+ KMOD_VERSION=$(kmod --version | awk '{print $3}')
+ if [[ $KMOD_VERSION -le 19 ]]; then
+ echo "$0: You need at least kmod 20" >&2
+ echo "kmod <= 19 is buggy, for details see:" >&2
+ echo "http://git.kernel.org/cgit/utils/kernel/kmod/kmod.git/commit/libkmod/libkmod-module.c?id=fd44a98ae2eb5eb32161088954ab21e58e19dfc4" >&2
+ exit 1
+ fi
+
+ uid=$(id -u)
+ if [ $uid -ne 0 ]; then
+ echo $msg must be run as root >&2
+ exit 0
+ fi
+}
+
+function load_req_mod()
+{
+ trap "test_modprobe" EXIT
+
+ if [ ! -d $DIR ]; then
+ # Alanis: "Oh isn't it ironic?"
+ modprobe $TEST_DRIVER
+ fi
+}
+
+test_finish()
+{
+ echo "Test completed"
+}
+
+errno_name_to_val()
+{
+ case "$1" in
+ # kmod calls modprobe and upon of a module not found
+ # modprobe returns just 1... However in the kernel we
+ # *sometimes* see 256...
+ MODULE_NOT_FOUND)
+ echo 256;;
+ SUCCESS)
+ echo 0;;
+ -EPERM)
+ echo -1;;
+ -ENOENT)
+ echo -2;;
+ -EINVAL)
+ echo -22;;
+ -ERR_ANY)
+ echo -123456;;
+ *)
+ echo invalid;;
+ esac
+}
+
+errno_val_to_name()
+ case "$1" in
+ 256)
+ echo MODULE_NOT_FOUND;;
+ 0)
+ echo SUCCESS;;
+ -1)
+ echo -EPERM;;
+ -2)
+ echo -ENOENT;;
+ -22)
+ echo -EINVAL;;
+ -123456)
+ echo -ERR_ANY;;
+ *)
+ echo invalid;;
+ esac
+
+config_set_test_case_driver()
+{
+ if ! echo -n 1 >$DIR/config_test_case; then
+ echo "$0: Unable to set to test case to driver" >&2
+ exit 1
+ fi
+}
+
+config_set_test_case_fs()
+{
+ if ! echo -n 2 >$DIR/config_test_case; then
+ echo "$0: Unable to set to test case to fs" >&2
+ exit 1
+ fi
+}
+
+config_num_threads()
+{
+ if ! echo -n $1 >$DIR/config_num_threads; then
+ echo "$0: Unable to set to number of threads" >&2
+ exit 1
+ fi
+}
+
+config_get_modprobe_limit()
+{
+ if [[ -f ${MODPROBE_LIMIT_FILE} ]] ; then
+ MODPROBE_LIMIT=$(cat $MODPROBE_LIMIT_FILE)
+ fi
+ echo $MODPROBE_LIMIT
+}
+
+config_num_thread_limit_extra()
+{
+ MODPROBE_LIMIT=$(config_get_modprobe_limit)
+ let EXTRA_LIMIT=$MODPROBE_LIMIT+$1
+ config_num_threads $EXTRA_LIMIT
+}
+
+# For special characters use printf directly,
+# refer to kmod_test_0001
+config_set_driver()
+{
+ if ! echo -n $1 >$DIR/config_test_driver; then
+ echo "$0: Unable to set driver" >&2
+ exit 1
+ fi
+}
+
+config_set_fs()
+{
+ if ! echo -n $1 >$DIR/config_test_fs; then
+ echo "$0: Unable to set driver" >&2
+ exit 1
+ fi
+}
+
+config_get_driver()
+{
+ cat $DIR/config_test_driver
+}
+
+config_get_test_result()
+{
+ cat $DIR/test_result
+}
+
+config_reset()
+{
+ if ! echo -n "1" >"$DIR"/reset; then
+ echo "$0: reset shuld have worked" >&2
+ exit 1
+ fi
+}
+
+config_show_config()
+{
+ echo "----------------------------------------------------"
+ cat "$DIR"/config
+ echo "----------------------------------------------------"
+}
+
+config_trigger()
+{
+ if ! echo -n "1" >"$DIR"/trigger_config 2>/dev/null; then
+ echo "$1: FAIL - loading should have worked"
+ config_show_config
+ exit 1
+ fi
+ echo "$1: OK! - loading kmod test"
+}
+
+config_trigger_want_fail()
+{
+ if echo "1" > $DIR/trigger_config 2>/dev/null; then
+ echo "$1: FAIL - test case was expected to fail"
+ config_show_config
+ exit 1
+ fi
+ echo "$1: OK! - kmod test case failed as expected"
+}
+
+config_expect_result()
+{
+ RC=$(config_get_test_result)
+ RC_NAME=$(errno_val_to_name $RC)
+
+ ERRNO_NAME=$2
+ ERRNO=$(errno_name_to_val $ERRNO_NAME)
+
+ if [[ $ERRNO_NAME = "-ERR_ANY" ]]; then
+ if [[ $RC -ge 0 ]]; then
+ echo "$1: FAIL, test expects $ERRNO_NAME - got $RC_NAME ($RC)" >&2
+ config_show_config
+ exit 1
+ fi
+ elif [[ $RC != $ERRNO ]]; then
+ echo "$1: FAIL, test expects $ERRNO_NAME ($ERRNO) - got $RC_NAME ($RC)" >&2
+ config_show_config
+ exit 1
+ fi
+ echo "$1: OK! - Return value: $RC ($RC_NAME), expected $ERRNO_NAME"
+}
+
+kmod_defaults_driver()
+{
+ config_reset
+ modprobe -r $DEFAULT_KMOD_DRIVER
+ config_set_driver $DEFAULT_KMOD_DRIVER
+}
+
+kmod_defaults_fs()
+{
+ config_reset
+ modprobe -r $DEFAULT_KMOD_FS
+ config_set_fs $DEFAULT_KMOD_FS
+ config_set_test_case_fs
+}
+
+kmod_test_0001_driver()
+{
+ NAME='\000'
+
+ kmod_defaults_driver
+ config_num_threads 1
+ printf '\000' >"$DIR"/config_test_driver
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} MODULE_NOT_FOUND
+}
+
+kmod_test_0001_fs()
+{
+ NAME='\000'
+
+ kmod_defaults_fs
+ config_num_threads 1
+ printf '\000' >"$DIR"/config_test_fs
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} -EINVAL
+}
+
+kmod_test_0001()
+{
+ kmod_test_0001_driver
+ kmod_test_0001_fs
+}
+
+kmod_test_0002_driver()
+{
+ NAME="nope-$DEFAULT_KMOD_DRIVER"
+
+ kmod_defaults_driver
+ config_set_driver $NAME
+ config_num_threads 1
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} MODULE_NOT_FOUND
+}
+
+kmod_test_0002_fs()
+{
+ NAME="nope-$DEFAULT_KMOD_FS"
+
+ kmod_defaults_fs
+ config_set_fs $NAME
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} -EINVAL
+}
+
+kmod_test_0002()
+{
+ kmod_test_0002_driver
+ kmod_test_0002_fs
+}
+
+kmod_test_0003()
+{
+ kmod_defaults_fs
+ config_num_threads 1
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+kmod_test_0004()
+{
+ kmod_defaults_fs
+ config_num_threads 2
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+kmod_test_0005()
+{
+ kmod_defaults_driver
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+kmod_test_0006()
+{
+ kmod_defaults_fs
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+kmod_test_0007()
+{
+ kmod_test_0005
+ kmod_test_0006
+}
+
+kmod_test_0008()
+{
+ kmod_defaults_driver
+ MODPROBE_LIMIT=$(config_get_modprobe_limit)
+ let EXTRA=$MODPROBE_LIMIT/6
+ config_num_thread_limit_extra $EXTRA
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+kmod_test_0009()
+{
+ kmod_defaults_fs
+ MODPROBE_LIMIT=$(config_get_modprobe_limit)
+ let EXTRA=$MODPROBE_LIMIT/4
+ config_num_thread_limit_extra $EXTRA
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+list_tests()
+{
+ echo "Test ID list:"
+ echo
+ echo "TEST_ID x NUM_TEST"
+ echo "TEST_ID: Test ID"
+ echo "NUM_TESTS: Number of recommended times to run the test"
+ echo
+ echo "0001 x $(get_test_count 0001) - Simple test - 1 thread for empty string"
+ echo "0002 x $(get_test_count 0002) - Simple test - 1 thread for modules/filesystems that do not exist"
+ echo "0003 x $(get_test_count 0003) - Simple test - 1 thread for get_fs_type() only"
+ echo "0004 x $(get_test_count 0004) - Simple test - 2 threads for get_fs_type() only"
+ echo "0005 x $(get_test_count 0005) - multithreaded tests with default setup - request_module() only"
+ echo "0006 x $(get_test_count 0006) - multithreaded tests with default setup - get_fs_type() only"
+ echo "0007 x $(get_test_count 0007) - multithreaded tests with default setup test request_module() and get_fs_type()"
+ echo "0008 x $(get_test_count 0008) - multithreaded - push kmod_concurrent over max_modprobes for request_module()"
+ echo "0009 x $(get_test_count 0009) - multithreaded - push kmod_concurrent over max_modprobes for get_fs_type()"
+}
+
+usage()
+{
+ NUM_TESTS=$(grep -o ' ' <<<"$ALL_TESTS" | grep -c .)
+ let NUM_TESTS=$NUM_TESTS+1
+ MAX_TEST=$(printf "%04d\n" $NUM_TESTS)
+ echo "Usage: $0 [ -t <4-number-digit> ] | [ -w <4-number-digit> ] |"
+ echo " [ -s <4-number-digit> ] | [ -c <4-number-digit> <test- count>"
+ echo " [ all ] [ -h | --help ] [ -l ]"
+ echo ""
+ echo "Valid tests: 0001-$MAX_TEST"
+ echo ""
+ echo " all Runs all tests (default)"
+ echo " -t Run test ID the number amount of times is recommended"
+ echo " -w Watch test ID run until it runs into an error"
+ echo " -c Run test ID once"
+ echo " -s Run test ID x test-count number of times"
+ echo " -l List all test ID list"
+ echo " -h|--help Help"
+ echo
+ echo "If an error every occurs execution will immediately terminate."
+ echo "If you are adding a new test try using -w <test-ID> first to"
+ echo "make sure the test passes a series of tests."
+ echo
+ echo Example uses:
+ echo
+ echo "${TEST_NAME}.sh -- executes all tests"
+ echo "${TEST_NAME}.sh -t 0008 -- Executes test ID 0008 number of times is recomended"
+ echo "${TEST_NAME}.sh -w 0008 -- Watch test ID 0008 run until an error occurs"
+ echo "${TEST_NAME}.sh -s 0008 -- Run test ID 0008 once"
+ echo "${TEST_NAME}.sh -c 0008 3 -- Run test ID 0008 three times"
+ echo
+ list_tests
+ exit 1
+}
+
+function test_num()
+{
+ re='^[0-9]+$'
+ if ! [[ $1 =~ $re ]]; then
+ usage
+ fi
+}
+
+function get_test_count()
+{
+ test_num $1
+ TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+ LAST_TWO=${TEST_DATA#*:*}
+ echo ${LAST_TWO%:*}
+}
+
+function get_test_enabled()
+{
+ test_num $1
+ TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+ echo ${TEST_DATA#*:*:}
+}
+
+function run_all_tests()
+{
+ for i in $ALL_TESTS ; do
+ TEST_ID=${i%:*:*}
+ ENABLED=$(get_test_enabled $TEST_ID)
+ TEST_COUNT=$(get_test_count $TEST_ID)
+ if [[ $ENABLED -eq "1" ]]; then
+ test_case $TEST_ID $TEST_COUNT
+ fi
+ done
+}
+
+function watch_log()
+{
+ if [ $# -ne 3 ]; then
+ clear
+ fi
+ date
+ echo "Running test: $2 - run #$1"
+}
+
+function watch_case()
+{
+ i=0
+ while [ 1 ]; do
+
+ if [ $# -eq 1 ]; then
+ test_num $1
+ watch_log $i ${TEST_NAME}_test_$1
+ ${TEST_NAME}_test_$1
+ else
+ watch_log $i all
+ run_all_tests
+ fi
+ let i=$i+1
+ done
+}
+
+function test_case()
+{
+ NUM_TESTS=$DEFAULT_NUM_TESTS
+ if [ $# -eq 2 ]; then
+ NUM_TESTS=$2
+ fi
+
+ i=0
+ while [ $i -lt $NUM_TESTS ]; do
+ test_num $1
+ watch_log $i ${TEST_NAME}_test_$1 noclear
+ RUN_TEST=${TEST_NAME}_test_$1
+ $RUN_TEST
+ let i=$i+1
+ done
+}
+
+function parse_args()
+{
+ if [ $# -eq 0 ]; then
+ run_all_tests
+ else
+ if [[ "$1" = "all" ]]; then
+ run_all_tests
+ elif [[ "$1" = "-w" ]]; then
+ shift
+ watch_case $@
+ elif [[ "$1" = "-t" ]]; then
+ shift
+ test_num $1
+ test_case $1 $(get_test_count $1)
+ elif [[ "$1" = "-c" ]]; then
+ shift
+ test_num $1
+ test_num $2
+ test_case $1 $2
+ elif [[ "$1" = "-s" ]]; then
+ shift
+ test_case $1 1
+ elif [[ "$1" = "-l" ]]; then
+ list_tests
+ elif [[ "$1" = "-h" || "$1" = "--help" ]]; then
+ usage
+ else
+ usage
+ fi
+ fi
+}
+
+test_reqs
+allow_user_defaults
+load_req_mod
+
+trap "test_finish" EXIT
+
+parse_args $@
+
+exit 0