summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/reset/socfpga-reset.txt3
-rw-r--r--Documentation/devicetree/bindings/reset/uniphier-reset.txt25
-rw-r--r--arch/arm/boot/dts/da850-evm.dts31
-rw-r--r--arch/arm/boot/dts/da850-lcdk.dts38
-rw-r--r--arch/arm/boot/dts/kirkwood-dnskw.dtsi4
-rw-r--r--arch/arm/mach-davinci/board-da830-evm.c4
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c4
-rw-r--r--arch/arm/mach-davinci/board-dm355-evm.c4
-rw-r--r--arch/arm/mach-davinci/board-dm644x-evm.c4
-rw-r--r--arch/arm/mach-davinci/board-omapl138-hawk.c4
-rw-r--r--arch/arm/mach-integrator/impd1.c8
-rw-r--r--arch/arm/mach-socfpga/socfpga.c4
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-ap806.dtsi17
-rw-r--r--arch/arm64/configs/defconfig4
-rw-r--r--drivers/reset/Kconfig20
-rw-r--r--drivers/reset/Makefile3
-rw-r--r--drivers/reset/core.c42
-rw-r--r--drivers/reset/reset-hsdk.c1
-rw-r--r--drivers/reset/reset-simple.c13
-rw-r--r--drivers/reset/reset-socfpga.c88
-rw-r--r--drivers/reset/reset-uniphier-glue.c (renamed from drivers/reset/reset-uniphier-usb3.c)50
-rw-r--r--drivers/soc/renesas/Kconfig2
-rw-r--r--drivers/soc/renesas/r8a774c0-sysc.c23
-rw-r--r--include/linux/qcom_scm.h1
-rw-r--r--include/linux/reset.h15
26 files changed, 321 insertions, 93 deletions
diff --git a/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt
index 98c9f560e5c5..38fe34fd8b8a 100644
--- a/Documentation/devicetree/bindings/reset/socfpga-reset.txt
+++ b/Documentation/devicetree/bindings/reset/socfpga-reset.txt
@@ -1,7 +1,8 @@
Altera SOCFPGA Reset Manager
Required properties:
-- compatible : "altr,rst-mgr"
+- compatible : "altr,rst-mgr" for (Cyclone5/Arria5/Arria10)
+ "altr,stratix10-rst-mgr","altr,rst-mgr" for Stratix10 ARM64 SoC
- reg : Should contain 1 register ranges(address and length)
- altr,modrst-offset : Should contain the offset of the first modrst register.
- #reset-cells: 1
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index 101743dda223..ea005177d20a 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -120,27 +120,30 @@ Example:
};
-USB3 core reset
----------------
+Peripheral core reset in glue layer
+-----------------------------------
-USB3 core reset belongs to USB3 glue layer. Before using the core reset,
-it is necessary to control the clocks and resets to enable this layer.
-These clocks and resets should be described in each property.
+Some peripheral core reset belongs to its own glue layer. Before using
+this core reset, it is necessary to control the clocks and resets to enable
+this layer. These clocks and resets should be described in each property.
Required properties:
- compatible: Should be
- "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC
- "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC
- "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC
- "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC
+ "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3
+ "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3
+ "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3
+ "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3
+ "socionext,uniphier-pro4-ahci-reset" - for Pro4 SoC AHCI
+ "socionext,uniphier-pxs2-ahci-reset" - for PXs2 SoC AHCI
+ "socionext,uniphier-pxs3-ahci-reset" - for PXs3 SoC AHCI
- #reset-cells: Should be 1.
- reg: Specifies offset and length of the register set for the device.
-- clocks: A list of phandles to the clock gate for USB3 glue layer.
+- clocks: A list of phandles to the clock gate for the glue layer.
According to the clock-names, appropriate clocks are required.
- clock-names: Should contain
"gio", "link" - for Pro4 SoC
"link" - for others
-- resets: A list of phandles to the reset control for USB3 glue layer.
+- resets: A list of phandles to the reset control for the glue layer.
According to the reset-names, appropriate resets are required.
- reset-names: Should contain
"gio", "link" - for Pro4 SoC
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index a3c9b346721d..f04bc3e15332 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -94,6 +94,28 @@
regulator-boot-on;
};
+ baseboard_3v3: fixedregulator-3v3 {
+ /* TPS73701DCQ */
+ compatible = "regulator-fixed";
+ regulator-name = "baseboard_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vbat>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ baseboard_1v8: fixedregulator-1v8 {
+ /* TPS73701DCQ */
+ compatible = "regulator-fixed";
+ regulator-name = "baseboard_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vbat>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
backlight_lcd: backlight-regulator {
compatible = "regulator-fixed";
regulator-name = "lcd_backlight_pwr";
@@ -105,7 +127,7 @@
sound {
compatible = "simple-audio-card";
- simple-audio-card,name = "DA850/OMAP-L138 EVM";
+ simple-audio-card,name = "DA850-OMAPL138 EVM";
simple-audio-card,widgets =
"Line", "Line In",
"Line", "Line Out";
@@ -210,10 +232,9 @@
/* Regulators */
IOVDD-supply = <&vdcdc2_reg>;
- /* Derived from VBAT: Baseboard 3.3V / 1.8V */
- AVDD-supply = <&vbat>;
- DRVDD-supply = <&vbat>;
- DVDD-supply = <&vbat>;
+ AVDD-supply = <&baseboard_3v3>;
+ DRVDD-supply = <&baseboard_3v3>;
+ DVDD-supply = <&baseboard_1v8>;
};
tca6416: gpio@20 {
compatible = "ti,tca6416";
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 0177e3ed20fe..3a2fa6e035a3 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -39,9 +39,39 @@
};
};
+ vcc_5vd: fixedregulator-vcc_5vd {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_5vd";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ vcc_3v3d: fixedregulator-vcc_3v3d {
+ /* TPS650250 - VDCDC1 */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3d";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_5vd>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_1v8d: fixedregulator-vcc_1v8d {
+ /* TPS650250 - VDCDC2 */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8d";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_5vd>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
sound {
compatible = "simple-audio-card";
- simple-audio-card,name = "DA850/OMAP-L138 LCDK";
+ simple-audio-card,name = "DA850-OMAPL138 LCDK";
simple-audio-card,widgets =
"Line", "Line In",
"Line", "Line Out";
@@ -221,6 +251,12 @@
compatible = "ti,tlv320aic3106";
reg = <0x18>;
status = "okay";
+
+ /* Regulators */
+ IOVDD-supply = <&vcc_3v3d>;
+ AVDD-supply = <&vcc_3v3d>;
+ DRVDD-supply = <&vcc_3v3d>;
+ DVDD-supply = <&vcc_1v8d>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index cbaf06f2f78e..eb917462b219 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -36,8 +36,8 @@
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
pinctrl-names = "default";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW
- &gpio1 13 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
+ &gpio1 13 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0
3000 1
6000 2>;
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index e52ec1619b70..c4da635ee4ce 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -208,9 +208,9 @@ static struct gpiod_lookup_table mmc_gpios_table = {
.dev_id = "da830-mmc.0",
.table = {
/* gpio chip 1 contains gpio range 32-63 */
- GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_CD_PIN, "cd",
+ GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_CD_PIN, "cd",
GPIO_ACTIVE_LOW),
- GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_WP_PIN, "wp",
+ GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp",
GPIO_ACTIVE_LOW),
},
};
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 6a29baf0a289..44bca048dfd0 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -805,9 +805,9 @@ static struct gpiod_lookup_table mmc_gpios_table = {
.dev_id = "da830-mmc.0",
.table = {
/* gpio chip 2 contains gpio range 64-95 */
- GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_CD_PIN, "cd",
+ GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_CD_PIN, "cd",
GPIO_ACTIVE_LOW),
- GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_WP_PIN, "wp",
+ GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp",
GPIO_ACTIVE_HIGH),
},
};
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index f53a461a606f..f7fa960c23e3 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -117,9 +117,9 @@ static struct platform_device davinci_nand_device = {
static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
.dev_id = "i2c_davinci.1",
.table = {
- GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SDA_PIN, "sda",
+ GPIO_LOOKUP("davinci_gpio", DM355_I2C_SDA_PIN, "sda",
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SCL_PIN, "scl",
+ GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl",
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
},
};
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index e1428115067f..b80c4ee76217 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -660,9 +660,9 @@ static struct i2c_board_info __initdata i2c_info[] = {
static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
.dev_id = "i2c_davinci.1",
.table = {
- GPIO_LOOKUP("davinci_gpio.0", DM644X_I2C_SDA_PIN, "sda",
+ GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SDA_PIN, "sda",
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- GPIO_LOOKUP("davinci_gpio.0", DM644X_I2C_SCL_PIN, "scl",
+ GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl",
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
},
};
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 8e8d51f4a276..94c4f126ef86 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -134,9 +134,9 @@ static const short hawk_mmcsd0_pins[] = {
static struct gpiod_lookup_table mmc_gpios_table = {
.dev_id = "da830-mmc.0",
.table = {
- GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_CD_PIN, "cd",
+ GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_CD_PIN, "cd",
GPIO_ACTIVE_LOW),
- GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_WP_PIN, "wp",
+ GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_WP_PIN, "wp",
GPIO_ACTIVE_LOW),
},
};
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index a109f6482413..8dfad012dfae 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -390,10 +390,14 @@ static int __ref impd1_probe(struct lm_device *dev)
char *mmciname;
lookup = devm_kzalloc(&dev->dev,
- sizeof(*lookup) + 3 * sizeof(struct gpiod_lookup),
+ struct_size(lookup, table, 3),
GFP_KERNEL);
chipname = devm_kstrdup(&dev->dev, devname, GFP_KERNEL);
- mmciname = kasprintf(GFP_KERNEL, "lm%x:00700", dev->id);
+ mmciname = devm_kasprintf(&dev->dev, GFP_KERNEL,
+ "lm%x:00700", dev->id);
+ if (!lookup || !chipname || !mmciname)
+ return -ENOMEM;
+
lookup->dev_id = mmciname;
/*
* Offsets on GPIO block 1:
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index 5fb6f79059a8..afd98971d903 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -32,6 +32,8 @@ void __iomem *rst_manager_base_addr;
void __iomem *sdr_ctl_base_addr;
unsigned long socfpga_cpu1start_addr;
+extern void __init socfpga_reset_init(void);
+
static void __init socfpga_sysmgr_init(void)
{
struct device_node *np;
@@ -64,6 +66,7 @@ static void __init socfpga_init_irq(void)
if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
socfpga_init_ocram_ecc();
+ socfpga_reset_init();
}
static void __init socfpga_arria10_init_irq(void)
@@ -74,6 +77,7 @@ static void __init socfpga_arria10_init_irq(void)
socfpga_init_arria10_l2_ecc();
if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
socfpga_init_arria10_ocram_ecc();
+ socfpga_reset_init();
}
static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index 29ea7e81ec4c..329f8ceeebea 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -183,7 +183,7 @@
pinctrl-0 = <&cp0_pcie_pins>;
num-lanes = <4>;
num-viewport = <8>;
- reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 7d94c1fa592a..7f799cb5668e 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -28,6 +28,23 @@
method = "smc";
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /*
+ * This area matches the mapping done with a
+ * mainline U-Boot, and should be updated by the
+ * bootloader.
+ */
+
+ psci-area@4000000 {
+ reg = <0x0 0x4000000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
ap806 {
#address-cells = <2>;
#size-cells = <2>;
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 3ef443cfbab6..c8432e24207e 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -506,11 +506,15 @@ CONFIG_SND_SOC_ROCKCHIP=m
CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
CONFIG_SND_SOC_ROCKCHIP_RT5645=m
CONFIG_SND_SOC_RK3399_GRU_SOUND=m
+CONFIG_SND_MESON_AXG_SOUND_CARD=m
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_SOC_RCAR=m
CONFIG_SND_SOC_AK4613=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SND_AUDIO_GRAPH_CARD=m
+CONFIG_SND_SOC_ES7134=m
+CONFIG_SND_SOC_ES7241=m
+CONFIG_SND_SOC_TAS571X=m
CONFIG_I2C_HID=m
CONFIG_USB=y
CONFIG_USB_OTG=y
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index c21da9fe51ec..2e01bd833ffd 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -109,7 +109,7 @@ config RESET_QCOM_PDC
config RESET_SIMPLE
bool "Simple Reset Controller Driver" if COMPILE_TEST
- default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
+ default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
help
This enables a simple reset controller driver for reset lines that
that can be asserted and deasserted by toggling bits in a contiguous,
@@ -128,6 +128,14 @@ config RESET_STM32MP157
help
This enables the RCC reset controller driver for STM32 MPUs.
+config RESET_SOCFPGA
+ bool "SoCFPGA Reset Driver" if COMPILE_TEST && !ARCH_SOCFPGA
+ default ARCH_SOCFPGA
+ select RESET_SIMPLE
+ help
+ This enables the reset driver for the SoCFPGA ARMv7 platforms. This
+ driver gets initialized early during platform init calls.
+
config RESET_SUNXI
bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
default ARCH_SUNXI
@@ -163,15 +171,15 @@ config RESET_UNIPHIER
Say Y if you want to control reset signals provided by System Control
block, Media I/O block, Peripheral Block.
-config RESET_UNIPHIER_USB3
- tristate "USB3 reset driver for UniPhier SoCs"
+config RESET_UNIPHIER_GLUE
+ tristate "Reset driver in glue layer for UniPhier SoCs"
depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
default ARCH_UNIPHIER
select RESET_SIMPLE
help
- Support for the USB3 core reset on UniPhier SoCs.
- Say Y if you want to control reset signals provided by
- USB3 glue layer.
+ Support for peripheral core reset included in its own glue layer
+ on UniPhier SoCs. Say Y if you want to control reset signals
+ provided by the glue layer.
config RESET_ZYNQ
bool "ZYNQ Reset Driver" if COMPILE_TEST
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index d08e8b90046a..dc7874df78d9 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -19,10 +19,11 @@ obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
+obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
-obj-$(CONFIG_RESET_UNIPHIER_USB3) += reset-uniphier-usb3.o
+obj-$(CONFIG_RESET_UNIPHIER_GLUE) += reset-uniphier-glue.o
obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index d1887c0ed5d3..9582efb70025 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -795,3 +795,45 @@ devm_reset_control_array_get(struct device *dev, bool shared, bool optional)
return rstc;
}
EXPORT_SYMBOL_GPL(devm_reset_control_array_get);
+
+static int reset_control_get_count_from_lookup(struct device *dev)
+{
+ const struct reset_control_lookup *lookup;
+ const char *dev_id;
+ int count = 0;
+
+ if (!dev)
+ return -EINVAL;
+
+ dev_id = dev_name(dev);
+ mutex_lock(&reset_lookup_mutex);
+
+ list_for_each_entry(lookup, &reset_lookup_list, list) {
+ if (!strcmp(lookup->dev_id, dev_id))
+ count++;
+ }
+
+ mutex_unlock(&reset_lookup_mutex);
+
+ if (count == 0)
+ count = -ENOENT;
+
+ return count;
+}
+
+/**
+ * reset_control_get_count - Count number of resets available with a device
+ *
+ * @dev: device for which to return the number of resets
+ *
+ * Returns positive reset count on success, or error number on failure and
+ * on count being zero.
+ */
+int reset_control_get_count(struct device *dev)
+{
+ if (dev->of_node)
+ return of_reset_control_get_count(dev->of_node);
+
+ return reset_control_get_count_from_lookup(dev);
+}
+EXPORT_SYMBOL_GPL(reset_control_get_count);
diff --git a/drivers/reset/reset-hsdk.c b/drivers/reset/reset-hsdk.c
index 8bce391c6943..4c7b8647b49c 100644
--- a/drivers/reset/reset-hsdk.c
+++ b/drivers/reset/reset-hsdk.c
@@ -86,6 +86,7 @@ static int hsdk_reset_reset(struct reset_controller_dev *rcdev,
static const struct reset_control_ops hsdk_reset_ops = {
.reset = hsdk_reset_reset,
+ .deassert = hsdk_reset_reset,
};
static int hsdk_reset_probe(struct platform_device *pdev)
diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c
index a91107fc9e27..77fbba3100c8 100644
--- a/drivers/reset/reset-simple.c
+++ b/drivers/reset/reset-simple.c
@@ -109,7 +109,7 @@ struct reset_simple_devdata {
#define SOCFPGA_NR_BANKS 8
static const struct reset_simple_devdata reset_simple_socfpga = {
- .reg_offset = 0x10,
+ .reg_offset = 0x20,
.nr_resets = SOCFPGA_NR_BANKS * 32,
.status_active_low = true,
};
@@ -120,7 +120,8 @@ static const struct reset_simple_devdata reset_simple_active_low = {
};
static const struct of_device_id reset_simple_dt_ids[] = {
- { .compatible = "altr,rst-mgr", .data = &reset_simple_socfpga },
+ { .compatible = "altr,stratix10-rst-mgr",
+ .data = &reset_simple_socfpga },
{ .compatible = "st,stm32-rcc", },
{ .compatible = "allwinner,sun6i-a31-clock-reset",
.data = &reset_simple_active_low },
@@ -166,14 +167,6 @@ static int reset_simple_probe(struct platform_device *pdev)
data->status_active_low = devdata->status_active_low;
}
- if (of_device_is_compatible(dev->of_node, "altr,rst-mgr") &&
- of_property_read_u32(dev->of_node, "altr,modrst-offset",
- &reg_offset)) {
- dev_warn(dev,
- "missing altr,modrst-offset property, assuming 0x%x!\n",
- reg_offset);
- }
-
data->membase += reg_offset;
return devm_reset_controller_register(dev, &data->rcdev);
diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c
new file mode 100644
index 000000000000..318cfc51c441
--- /dev/null
+++ b/drivers/reset/reset-socfpga.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018, Intel Corporation
+ * Copied from reset-sunxi.c
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include "reset-simple.h"
+
+#define SOCFPGA_NR_BANKS 8
+void __init socfpga_reset_init(void);
+
+static int a10_reset_init(struct device_node *np)
+{
+ struct reset_simple_data *data;
+ struct resource res;
+ resource_size_t size;
+ int ret;
+ u32 reg_offset = 0x10;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret)
+ goto err_alloc;
+
+ size = resource_size(&res);
+ if (!request_mem_region(res.start, size, np->name)) {
+ ret = -EBUSY;
+ goto err_alloc;
+ }
+
+ data->membase = ioremap(res.start, size);
+ if (!data->membase) {
+ ret = -ENOMEM;
+ goto err_alloc;
+ }
+
+ if (of_property_read_u32(np, "altr,modrst-offset", &reg_offset))
+ pr_warn("missing altr,modrst-offset property, assuming 0x10\n");
+ data->membase += reg_offset;
+
+ spin_lock_init(&data->lock);
+
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.nr_resets = SOCFPGA_NR_BANKS * 32;
+ data->rcdev.ops = &reset_simple_ops;
+ data->rcdev.of_node = np;
+ data->status_active_low = true;
+
+ return reset_controller_register(&data->rcdev);
+
+err_alloc:
+ kfree(data);
+ return ret;
+};
+
+/*
+ * These are the reset controller we need to initialize early on in
+ * our system, before we can even think of using a regular device
+ * driver for it.
+ * The controllers that we can register through the regular device
+ * model are handled by the simple reset driver directly.
+ */
+static const struct of_device_id socfpga_early_reset_dt_ids[] __initconst = {
+ { .compatible = "altr,rst-mgr", },
+ { /* sentinel */ },
+};
+
+void __init socfpga_reset_init(void)
+{
+ struct device_node *np;
+
+ for_each_matching_node(np, socfpga_early_reset_dt_ids)
+ a10_reset_init(np);
+}
diff --git a/drivers/reset/reset-uniphier-usb3.c b/drivers/reset/reset-uniphier-glue.c
index ffa1b19b594d..a45923f4df6d 100644
--- a/drivers/reset/reset-uniphier-usb3.c
+++ b/drivers/reset/reset-uniphier-glue.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
//
-// reset-uniphier-usb3.c - USB3 reset driver for UniPhier
+// reset-uniphier-glue.c - Glue layer reset driver for UniPhier
// Copyright 2018 Socionext Inc.
// Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
@@ -15,24 +15,24 @@
#define MAX_CLKS 2
#define MAX_RSTS 2
-struct uniphier_usb3_reset_soc_data {
+struct uniphier_glue_reset_soc_data {
int nclks;
const char * const *clock_names;
int nrsts;
const char * const *reset_names;
};
-struct uniphier_usb3_reset_priv {
+struct uniphier_glue_reset_priv {
struct clk_bulk_data clk[MAX_CLKS];
struct reset_control *rst[MAX_RSTS];
struct reset_simple_data rdata;
- const struct uniphier_usb3_reset_soc_data *data;
+ const struct uniphier_glue_reset_soc_data *data;
};
-static int uniphier_usb3_reset_probe(struct platform_device *pdev)
+static int uniphier_glue_reset_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct uniphier_usb3_reset_priv *priv;
+ struct uniphier_glue_reset_priv *priv;
struct resource *res;
resource_size_t size;
const char *name;
@@ -100,9 +100,9 @@ out_rst_assert:
return ret;
}
-static int uniphier_usb3_reset_remove(struct platform_device *pdev)
+static int uniphier_glue_reset_remove(struct platform_device *pdev)
{
- struct uniphier_usb3_reset_priv *priv = platform_get_drvdata(pdev);
+ struct uniphier_glue_reset_priv *priv = platform_get_drvdata(pdev);
int i;
for (i = 0; i < priv->data->nrsts; i++)
@@ -117,7 +117,7 @@ static const char * const uniphier_pro4_clock_reset_names[] = {
"gio", "link",
};
-static const struct uniphier_usb3_reset_soc_data uniphier_pro4_data = {
+static const struct uniphier_glue_reset_soc_data uniphier_pro4_data = {
.nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
.clock_names = uniphier_pro4_clock_reset_names,
.nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
@@ -128,14 +128,14 @@ static const char * const uniphier_pxs2_clock_reset_names[] = {
"link",
};
-static const struct uniphier_usb3_reset_soc_data uniphier_pxs2_data = {
+static const struct uniphier_glue_reset_soc_data uniphier_pxs2_data = {
.nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
.clock_names = uniphier_pxs2_clock_reset_names,
.nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
.reset_names = uniphier_pxs2_clock_reset_names,
};
-static const struct of_device_id uniphier_usb3_reset_match[] = {
+static const struct of_device_id uniphier_glue_reset_match[] = {
{
.compatible = "socionext,uniphier-pro4-usb3-reset",
.data = &uniphier_pro4_data,
@@ -152,20 +152,32 @@ static const struct of_device_id uniphier_usb3_reset_match[] = {
.compatible = "socionext,uniphier-pxs3-usb3-reset",
.data = &uniphier_pxs2_data,
},
+ {
+ .compatible = "socionext,uniphier-pro4-ahci-reset",
+ .data = &uniphier_pro4_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs2-ahci-reset",
+ .data = &uniphier_pxs2_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs3-ahci-reset",
+ .data = &uniphier_pxs2_data,
+ },
{ /* Sentinel */ }
};
-MODULE_DEVICE_TABLE(of, uniphier_usb3_reset_match);
+MODULE_DEVICE_TABLE(of, uniphier_glue_reset_match);
-static struct platform_driver uniphier_usb3_reset_driver = {
- .probe = uniphier_usb3_reset_probe,
- .remove = uniphier_usb3_reset_remove,
+static struct platform_driver uniphier_glue_reset_driver = {
+ .probe = uniphier_glue_reset_probe,
+ .remove = uniphier_glue_reset_remove,
.driver = {
- .name = "uniphier-usb3-reset",
- .of_match_table = uniphier_usb3_reset_match,
+ .name = "uniphier-glue-reset",
+ .of_match_table = uniphier_glue_reset_match,
},
};
-module_platform_driver(uniphier_usb3_reset_driver);
+module_platform_driver(uniphier_glue_reset_driver);
MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
-MODULE_DESCRIPTION("UniPhier USB3 Reset Driver");
+MODULE_DESCRIPTION("UniPhier Glue layer reset driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 4d8012e1205c..68bfca6f20dd 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -44,7 +44,7 @@ config ARCH_RZN1
bool
select ARM_AMBA
-if ARM
+if ARM && ARCH_RENESAS
#comment "Renesas ARM SoCs System Type"
diff --git a/drivers/soc/renesas/r8a774c0-sysc.c b/drivers/soc/renesas/r8a774c0-sysc.c
index e1ac4c0f6640..11050e17ea81 100644
--- a/drivers/soc/renesas/r8a774c0-sysc.c
+++ b/drivers/soc/renesas/r8a774c0-sysc.c
@@ -28,19 +28,6 @@ static struct rcar_sysc_area r8a774c0_areas[] __initdata = {
{ "3dg-b", 0x100, 1, R8A774C0_PD_3DG_B, R8A774C0_PD_3DG_A },
};
-static void __init rcar_sysc_fix_parent(struct rcar_sysc_area *areas,
- unsigned int num_areas, u8 id,
- int new_parent)
-{
- unsigned int i;
-
- for (i = 0; i < num_areas; i++)
- if (areas[i].isr_bit == id) {
- areas[i].parent = new_parent;
- return;
- }
-}
-
/* Fixups for RZ/G2E ES1.0 revision */
static const struct soc_device_attribute r8a774c0[] __initconst = {
{ .soc_id = "r8a774c0", .revision = "ES1.0" },
@@ -50,12 +37,10 @@ static const struct soc_device_attribute r8a774c0[] __initconst = {
static int __init r8a774c0_sysc_init(void)
{
if (soc_device_match(r8a774c0)) {
- rcar_sysc_fix_parent(r8a774c0_areas,
- ARRAY_SIZE(r8a774c0_areas),
- R8A774C0_PD_3DG_A, R8A774C0_PD_3DG_B);
- rcar_sysc_fix_parent(r8a774c0_areas,
- ARRAY_SIZE(r8a774c0_areas),
- R8A774C0_PD_3DG_B, R8A774C0_PD_ALWAYS_ON);
+ /* Fix incorrect 3DG hierarchy */
+ swap(r8a774c0_areas[6], r8a774c0_areas[7]);
+ r8a774c0_areas[6].parent = R8A774C0_PD_ALWAYS_ON;
+ r8a774c0_areas[7].parent = R8A774C0_PD_3DG_B;
}
return 0;
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index 1637385bcc17..d0aecc04c54b 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -13,6 +13,7 @@
#ifndef __QCOM_SCM_H
#define __QCOM_SCM_H
+#include <linux/err.h>
#include <linux/types.h>
#include <linux/cpumask.h>
diff --git a/include/linux/reset.h b/include/linux/reset.h
index 29af6d6b2f4b..c1901b61ca30 100644
--- a/include/linux/reset.h
+++ b/include/linux/reset.h
@@ -32,6 +32,8 @@ struct reset_control *devm_reset_control_array_get(struct device *dev,
struct reset_control *of_reset_control_array_get(struct device_node *np,
bool shared, bool optional);
+int reset_control_get_count(struct device *dev);
+
#else
static inline int reset_control_reset(struct reset_control *rstc)
@@ -97,6 +99,11 @@ of_reset_control_array_get(struct device_node *np, bool shared, bool optional)
return optional ? NULL : ERR_PTR(-ENOTSUPP);
}
+static inline int reset_control_get_count(struct device *dev)
+{
+ return -ENOENT;
+}
+
#endif /* CONFIG_RESET_CONTROLLER */
static inline int __must_check device_reset(struct device *dev)
@@ -138,7 +145,7 @@ __must_check reset_control_get_exclusive(struct device *dev, const char *id)
*
* Returns a struct reset_control or IS_ERR() condition containing errno.
* This function is intended for use with reset-controls which are shared
- * between hardware-blocks.
+ * between hardware blocks.
*
* When a reset-control is shared, the behavior of reset_control_assert /
* deassert is changed, the reset-core will keep track of a deassert_count
@@ -187,7 +194,7 @@ static inline struct reset_control *of_reset_control_get_exclusive(
}
/**
- * of_reset_control_get_shared - Lookup and obtain an shared reference
+ * of_reset_control_get_shared - Lookup and obtain a shared reference
* to a reset controller.
* @node: device to be reset by the controller
* @id: reset line name
@@ -229,7 +236,7 @@ static inline struct reset_control *of_reset_control_get_exclusive_by_index(
}
/**
- * of_reset_control_get_shared_by_index - Lookup and obtain an shared
+ * of_reset_control_get_shared_by_index - Lookup and obtain a shared
* reference to a reset controller
* by index.
* @node: device to be reset by the controller
@@ -322,7 +329,7 @@ devm_reset_control_get_exclusive_by_index(struct device *dev, int index)
/**
* devm_reset_control_get_shared_by_index - resource managed
- * reset_control_get_shared
+ * reset_control_get_shared
* @dev: device to be reset by the controller
* @index: index of the reset controller
*