summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/scsi/ata_piix.c6
-rw-r--r--drivers/scsi/libata-bmdma.c238
-rw-r--r--drivers/scsi/libata-core.c469
-rw-r--r--drivers/scsi/libata-scsi.c79
-rw-r--r--drivers/scsi/sata_nv.c181
-rw-r--r--drivers/scsi/sata_sil.c2
-rw-r--r--drivers/scsi/sata_sil24.c25
-rw-r--r--drivers/scsi/sata_uli.c37
-rw-r--r--drivers/scsi/sata_vsc.c4
-rw-r--r--drivers/scsi/scsi_sysfs.c2
-rw-r--r--include/linux/libata.h12
-rw-r--r--include/scsi/scsi_host.h2
12 files changed, 551 insertions, 506 deletions
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index a74e23d39ba9..2d5be84d8bd4 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -742,7 +742,7 @@ static int piix_disable_ahci(struct pci_dev *pdev)
/**
* piix_check_450nx_errata - Check for problem 450NX setup
* @ata_dev: the PCI device to check
- *
+ *
* Check for the present of 450NX errata #19 and errata #25. If
* they are found return an error code so we can turn off DMA
*/
@@ -753,7 +753,7 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev)
u16 cfg;
u8 rev;
int no_piix_dma = 0;
-
+
while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL)
{
/* Look for 450NX PXB. Check for problem configurations
@@ -772,7 +772,7 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev)
if(no_piix_dma == 2)
dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n");
return no_piix_dma;
-}
+}
static void __devinit piix_init_sata_map(struct pci_dev *pdev,
struct ata_port_info *pinfo)
diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c
index 96b4d2160df8..95d81d86d8b7 100644
--- a/drivers/scsi/libata-bmdma.c
+++ b/drivers/scsi/libata-bmdma.c
@@ -418,6 +418,240 @@ u8 ata_altstatus(struct ata_port *ap)
return inb(ap->ioaddr.altstatus_addr);
}
+/**
+ * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+ u8 dmactl;
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+
+ /* load PRD table addr. */
+ mb(); /* make sure PRD table writes are visible to controller */
+ writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS);
+
+ /* specify data direction, triple-check start bit is clear */
+ dmactl = readb(mmio + ATA_DMA_CMD);
+ dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
+ if (!rw)
+ dmactl |= ATA_DMA_WR;
+ writeb(dmactl, mmio + ATA_DMA_CMD);
+
+ /* issue r/w command */
+ ap->ops->exec_command(ap, &qc->tf);
+}
+
+/**
+ * ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+ u8 dmactl;
+
+ /* start host DMA transaction */
+ dmactl = readb(mmio + ATA_DMA_CMD);
+ writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD);
+
+ /* Strictly, one may wish to issue a readb() here, to
+ * flush the mmio write. However, control also passes
+ * to the hardware at this point, and it will interrupt
+ * us when we are to resume control. So, in effect,
+ * we don't care when the mmio write flushes.
+ * Further, a read of the DMA status register _immediately_
+ * following the write may not be what certain flaky hardware
+ * is expected, so I think it is best to not add a readb()
+ * without first all the MMIO ATA cards/mobos.
+ * Or maybe I'm just being paranoid.
+ */
+}
+
+/**
+ * ata_bmdma_setup_pio - Set up PCI IDE BMDMA transaction (PIO)
+ * @qc: Info associated with this ATA transaction.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+ u8 dmactl;
+
+ /* load PRD table addr. */
+ outl(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
+
+ /* specify data direction, triple-check start bit is clear */
+ dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+ dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
+ if (!rw)
+ dmactl |= ATA_DMA_WR;
+ outb(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+
+ /* issue r/w command */
+ ap->ops->exec_command(ap, &qc->tf);
+}
+
+/**
+ * ata_bmdma_start_pio - Start a PCI IDE BMDMA transaction (PIO)
+ * @qc: Info associated with this ATA transaction.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+static void ata_bmdma_start_pio (struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ u8 dmactl;
+
+ /* start host DMA transaction */
+ dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+ outb(dmactl | ATA_DMA_START,
+ ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+}
+
+
+/**
+ * ata_bmdma_start - Start a PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * Writes the ATA_DMA_START flag to the DMA command register.
+ *
+ * May be used as the bmdma_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+void ata_bmdma_start(struct ata_queued_cmd *qc)
+{
+ if (qc->ap->flags & ATA_FLAG_MMIO)
+ ata_bmdma_start_mmio(qc);
+ else
+ ata_bmdma_start_pio(qc);
+}
+
+
+/**
+ * ata_bmdma_setup - Set up PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * Writes address of PRD table to device's PRD Table Address
+ * register, sets the DMA control register, and calls
+ * ops->exec_command() to start the transfer.
+ *
+ * May be used as the bmdma_setup() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+void ata_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ if (qc->ap->flags & ATA_FLAG_MMIO)
+ ata_bmdma_setup_mmio(qc);
+ else
+ ata_bmdma_setup_pio(qc);
+}
+
+
+/**
+ * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Clear interrupt and error flags in DMA status register.
+ *
+ * May be used as the irq_clear() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+void ata_bmdma_irq_clear(struct ata_port *ap)
+{
+ if (!ap->ioaddr.bmdma_addr)
+ return;
+
+ if (ap->flags & ATA_FLAG_MMIO) {
+ void __iomem *mmio =
+ ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS;
+ writeb(readb(mmio), mmio);
+ } else {
+ unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS;
+ outb(inb(addr), addr);
+ }
+}
+
+
+/**
+ * ata_bmdma_status - Read PCI IDE BMDMA status
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Read and return BMDMA status register.
+ *
+ * May be used as the bmdma_status() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+u8 ata_bmdma_status(struct ata_port *ap)
+{
+ u8 host_stat;
+ if (ap->flags & ATA_FLAG_MMIO) {
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+ host_stat = readb(mmio + ATA_DMA_STATUS);
+ } else
+ host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ return host_stat;
+}
+
+
+/**
+ * ata_bmdma_stop - Stop PCI IDE BMDMA transfer
+ * @qc: Command we are ending DMA for
+ *
+ * Clears the ATA_DMA_START flag in the dma control register
+ *
+ * May be used as the bmdma_stop() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+void ata_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ if (ap->flags & ATA_FLAG_MMIO) {
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+
+ /* clear start/stop bit */
+ writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
+ mmio + ATA_DMA_CMD);
+ } else {
+ /* clear start/stop bit */
+ outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START,
+ ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+ }
+
+ /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+ ata_altstatus(ap); /* dummy read */
+}
+
#ifdef CONFIG_PCI
static struct ata_probe_ent *
ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
@@ -707,7 +941,7 @@ err_out:
* @pdev: PCI device
*
* Some PCI ATA devices report simplex mode but in fact can be told to
- * enter non simplex mode. This implements the neccessary logic to
+ * enter non simplex mode. This implements the neccessary logic to
* perform the task on such devices. Calling it on other devices will
* have -undefined- behaviour.
*/
@@ -732,7 +966,7 @@ unsigned long ata_pci_default_filter(const struct ata_port *ap, struct ata_devic
{
/* Filter out DMA modes if the device has been configured by
the BIOS as PIO only */
-
+
if (ap->ioaddr.bmdma_addr == 0)
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
return xfer_mask;
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 0314abd97f2d..d279666dcb38 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -64,9 +64,9 @@
static unsigned int ata_dev_init_params(struct ata_port *ap,
struct ata_device *dev);
static void ata_set_mode(struct ata_port *ap);
-static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev);
-static unsigned int ata_dev_xfermask(struct ata_port *ap,
- struct ata_device *dev);
+static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
+ struct ata_device *dev);
+static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev);
static unsigned int ata_unique_id = 1;
static struct workqueue_struct *ata_wq;
@@ -190,7 +190,7 @@ static const u8 ata_rw_cmds[] = {
* ata_rwcmd_protocol - set taskfile r/w commands and protocol
* @qc: command to examine and configure
*
- * Examine the device configuration and tf->flags to calculate
+ * Examine the device configuration and tf->flags to calculate
* the proper read/write commands and protocol to use.
*
* LOCKING:
@@ -203,7 +203,7 @@ int ata_rwcmd_protocol(struct ata_queued_cmd *qc)
u8 cmd;
int index, fua, lba48, write;
-
+
fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0;
lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0;
write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0;
@@ -252,6 +252,29 @@ static unsigned int ata_pack_xfermask(unsigned int pio_mask,
((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA);
}
+/**
+ * ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks
+ * @xfer_mask: xfer_mask to unpack
+ * @pio_mask: resulting pio_mask
+ * @mwdma_mask: resulting mwdma_mask
+ * @udma_mask: resulting udma_mask
+ *
+ * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask.
+ * Any NULL distination masks will be ignored.
+ */
+static void ata_unpack_xfermask(unsigned int xfer_mask,
+ unsigned int *pio_mask,
+ unsigned int *mwdma_mask,
+ unsigned int *udma_mask)
+{
+ if (pio_mask)
+ *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO;
+ if (mwdma_mask)
+ *mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA;
+ if (udma_mask)
+ *udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA;
+}
+
static const struct ata_xfer_ent {
unsigned int shift, bits;
u8 base;
@@ -372,6 +395,15 @@ static const char *ata_mode_string(unsigned int xfer_mask)
return "<n/a>";
}
+static void ata_dev_disable(struct ata_port *ap, struct ata_device *dev)
+{
+ if (ata_dev_present(dev)) {
+ printk(KERN_WARNING "ata%u: dev %u disabled\n",
+ ap->id, dev->devno);
+ dev->class++;
+ }
+}
+
/**
* ata_pio_devchk - PATA device presence detection
* @ap: ATA channel to examine
@@ -987,6 +1019,22 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
ata_qc_free(qc);
+ /* XXX - Some LLDDs (sata_mv) disable port on command failure.
+ * Until those drivers are fixed, we detect the condition
+ * here, fail the command with AC_ERR_SYSTEM and reenable the
+ * port.
+ *
+ * Note that this doesn't change any behavior as internal
+ * command failure results in disabling the device in the
+ * higher layer for LLDDs without new reset/EH callbacks.
+ *
+ * Kill the following code as soon as those drivers are fixed.
+ */
+ if (ap->flags & ATA_FLAG_PORT_DISABLED) {
+ err_mask |= AC_ERR_SYSTEM;
+ ata_port_probe(ap);
+ }
+
return err_mask;
}
@@ -1007,7 +1055,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
return 0;
if (speed > 2)
return 1;
-
+
/* If we have no drive specific rule, then PIO 2 is non IORDY */
if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */
@@ -1305,7 +1353,7 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev,
if (print_info)
printk(KERN_INFO "ata%u(%u): applying bridge limits\n",
ap->id, dev->devno);
- ap->udma_mask &= ATA_UDMA5;
+ dev->udma_mask &= ATA_UDMA5;
dev->max_sectors = ATA_MAX_SECTORS;
}
@@ -1316,8 +1364,6 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev,
return 0;
err_out_nosup:
- printk(KERN_WARNING "ata%u: dev %u not supported, ignoring\n",
- ap->id, dev->devno);
DPRINTK("EXIT, err\n");
return rc;
}
@@ -1384,7 +1430,7 @@ static int ata_bus_probe(struct ata_port *ap)
}
if (ata_dev_configure(ap, dev, 1)) {
- dev->class++; /* disable device */
+ ata_dev_disable(ap, dev);
continue;
}
@@ -1530,6 +1576,23 @@ void sata_phy_reset(struct ata_port *ap)
}
/**
+ * ata_dev_pair - return other device on cable
+ * @ap: port
+ * @adev: device
+ *
+ * Obtain the other device on the same cable, or if none is
+ * present NULL is returned
+ */
+
+struct ata_device *ata_dev_pair(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ata_device *pair = &ap->device[1 - adev->devno];
+ if (!ata_dev_present(pair))
+ return NULL;
+ return pair;
+}
+
+/**
* ata_port_disable - Disable port.
* @ap: Port to be disabled.
*
@@ -1557,7 +1620,7 @@ void ata_port_disable(struct ata_port *ap)
* PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
* These were taken from ATA/ATAPI-6 standard, rev 0a, except
* for PIO 5, which is a nonstandard extension and UDMA6, which
- * is currently supported only by Maxtor drives.
+ * is currently supported only by Maxtor drives.
*/
static const struct ata_timing ata_timing[] = {
@@ -1572,11 +1635,11 @@ static const struct ata_timing ata_timing[] = {
{ XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */
-
+
{ XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
{ XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
{ XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
-
+
{ XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
{ XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
{ XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
@@ -1629,7 +1692,7 @@ static const struct ata_timing* ata_timing_find_mode(unsigned short speed)
for (t = ata_timing; t->mode != speed; t++)
if (t->mode == 0xFF)
return NULL;
- return t;
+ return t;
}
int ata_timing_compute(struct ata_device *adev, unsigned short speed,
@@ -1639,7 +1702,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
struct ata_timing p;
/*
- * Find the mode.
+ * Find the mode.
*/
if (!(s = ata_timing_find_mode(speed)))
@@ -1697,20 +1760,28 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
return 0;
}
-static void ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev)
+static int ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev)
{
- if (!ata_dev_present(dev) || (ap->flags & ATA_FLAG_PORT_DISABLED))
- return;
+ unsigned int err_mask;
+ int rc;
if (dev->xfer_shift == ATA_SHIFT_PIO)
dev->flags |= ATA_DFLAG_PIO;
- ata_dev_set_xfermode(ap, dev);
+ err_mask = ata_dev_set_xfermode(ap, dev);
+ if (err_mask) {
+ printk(KERN_ERR
+ "ata%u: failed to set xfermode (err_mask=0x%x)\n",
+ ap->id, err_mask);
+ return -EIO;
+ }
- if (ata_dev_revalidate(ap, dev, 0)) {
- printk(KERN_ERR "ata%u: failed to revalidate after set "
- "xfermode, disabled\n", ap->id);
- ata_port_disable(ap);
+ rc = ata_dev_revalidate(ap, dev, 0);
+ if (rc) {
+ printk(KERN_ERR
+ "ata%u: failed to revalidate after set xfermode\n",
+ ap->id);
+ return rc;
}
DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n",
@@ -1719,6 +1790,7 @@ static void ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev)
printk(KERN_INFO "ata%u: dev %u configured for %s\n",
ap->id, dev->devno,
ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode)));
+ return 0;
}
static int ata_host_set_pio(struct ata_port *ap)
@@ -1778,16 +1850,19 @@ static void ata_set_mode(struct ata_port *ap)
/* step 1: calculate xfer_mask */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- unsigned int xfer_mask;
+ unsigned int pio_mask, dma_mask;
if (!ata_dev_present(dev))
continue;
- xfer_mask = ata_dev_xfermask(ap, dev);
+ ata_dev_xfermask(ap, dev);
+
+ /* TODO: let LLDD filter dev->*_mask here */
- dev->pio_mode = ata_xfer_mask2mode(xfer_mask & ATA_MASK_PIO);
- dev->dma_mode = ata_xfer_mask2mode(xfer_mask & (ATA_MASK_MWDMA |
- ATA_MASK_UDMA));
+ pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0);
+ dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask);
+ dev->pio_mode = ata_xfer_mask2mode(pio_mask);
+ dev->dma_mode = ata_xfer_mask2mode(dma_mask);
}
/* step 2: always set host PIO timings */
@@ -1799,11 +1874,15 @@ static void ata_set_mode(struct ata_port *ap)
ata_host_set_dma(ap);
/* step 4: update devices' xfer mode */
- for (i = 0; i < ATA_MAX_DEVICES; i++)
- ata_dev_set_mode(ap, &ap->device[i]);
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ struct ata_device *dev = &ap->device[i];
- if (ap->flags & ATA_FLAG_PORT_DISABLED)
- return;
+ if (!ata_dev_present(dev))
+ continue;
+
+ if (ata_dev_set_mode(ap, dev))
+ goto err_out;
+ }
if (ap->ops->post_set_mode)
ap->ops->post_set_mode(ap);
@@ -1999,11 +2078,11 @@ static unsigned int ata_bus_softreset(struct ata_port *ap,
*/
msleep(150);
-
- /* Before we perform post reset processing we want to see if
+
+ /* Before we perform post reset processing we want to see if
the bus shows 0xFF because the odd clown forgets the D7 pulldown
resistor */
-
+
if (ata_check_status(ap) == 0xFF)
return 1; /* Positive is failure for some reason */
@@ -2572,22 +2651,22 @@ static const char * const ata_dma_blacklist [] = {
"SanDisk SDP3B-64", NULL,
"SANYO CD-ROM CRD", NULL,
"HITACHI CDR-8", NULL,
- "HITACHI CDR-8335", NULL,
+ "HITACHI CDR-8335", NULL,
"HITACHI CDR-8435", NULL,
- "Toshiba CD-ROM XM-6202B", NULL,
- "TOSHIBA CD-ROM XM-1702BC", NULL,
- "CD-532E-A", NULL,
- "E-IDE CD-ROM CR-840", NULL,
- "CD-ROM Drive/F5A", NULL,
- "WPI CDD-820", NULL,
+ "Toshiba CD-ROM XM-6202B", NULL,
+ "TOSHIBA CD-ROM XM-1702BC", NULL,
+ "CD-532E-A", NULL,
+ "E-IDE CD-ROM CR-840", NULL,
+ "CD-ROM Drive/F5A", NULL,
+ "WPI CDD-820", NULL,
"SAMSUNG CD-ROM SC-148C", NULL,
- "SAMSUNG CD-ROM SC", NULL,
+ "SAMSUNG CD-ROM SC", NULL,
"SanDisk SDP3B-64", NULL,
"ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,
"_NEC DV5800A", NULL,
"SAMSUNG CD-ROM SN-124", "N001"
};
-
+
static int ata_strim(char *s, size_t len)
{
len = strnlen(s, len);
@@ -2630,18 +2709,15 @@ static int ata_dma_blacklisted(const struct ata_device *dev)
* @ap: Port on which the device to compute xfermask for resides
* @dev: Device to compute xfermask for
*
- * Compute supported xfermask of @dev. This function is
- * responsible for applying all known limits including host
- * controller limits, device blacklist, etc...
+ * Compute supported xfermask of @dev and store it in
+ * dev->*_mask. This function is responsible for applying all
+ * known limits including host controller limits, device
+ * blacklist, etc...
*
* LOCKING:
* None.
- *
- * RETURNS:
- * Computed xfermask.
*/
-static unsigned int ata_dev_xfermask(struct ata_port *ap,
- struct ata_device *dev)
+static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev)
{
unsigned long xfer_mask;
int i;
@@ -2654,6 +2730,8 @@ static unsigned int ata_dev_xfermask(struct ata_port *ap,
struct ata_device *d = &ap->device[i];
if (!ata_dev_present(d))
continue;
+ xfer_mask &= ata_pack_xfermask(d->pio_mask, d->mwdma_mask,
+ d->udma_mask);
xfer_mask &= ata_id_xfermask(d->id);
if (ata_dma_blacklisted(d))
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
@@ -2663,7 +2741,8 @@ static unsigned int ata_dev_xfermask(struct ata_port *ap,
printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, "
"disabling DMA\n", ap->id, dev->devno);
- return xfer_mask;
+ ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
+ &dev->udma_mask);
}
/**
@@ -2676,11 +2755,16 @@ static unsigned int ata_dev_xfermask(struct ata_port *ap,
*
* LOCKING:
* PCI/etc. bus probe sem.
+ *
+ * RETURNS:
+ * 0 on success, AC_ERR_* mask otherwise.
*/
-static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
+static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
+ struct ata_device *dev)
{
struct ata_taskfile tf;
+ unsigned int err_mask;
/* set up set-features taskfile */
DPRINTK("set features - xfer mode\n");
@@ -2692,13 +2776,10 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
tf.protocol = ATA_PROT_NODATA;
tf.nsect = dev->xfer_mode;
- if (ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0)) {
- printk(KERN_ERR "ata%u: failed to set xfermode, disabled\n",
- ap->id);
- ata_port_disable(ap);
- }
+ err_mask = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0);
- DPRINTK("EXIT\n");
+ DPRINTK("EXIT, err_mask=%x\n", err_mask);
+ return err_mask;
}
/**
@@ -2775,7 +2856,7 @@ static void ata_sg_clean(struct ata_queued_cmd *qc)
if (qc->flags & ATA_QCFLAG_SG) {
if (qc->n_elem)
- dma_unmap_sg(ap->host_set->dev, sg, qc->n_elem, dir);
+ dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
/* restore last sg */
sg[qc->orig_n_elem - 1].length += qc->pad_len;
if (pad_buf) {
@@ -2786,7 +2867,7 @@ static void ata_sg_clean(struct ata_queued_cmd *qc)
}
} else {
if (qc->n_elem)
- dma_unmap_single(ap->host_set->dev,
+ dma_unmap_single(ap->dev,
sg_dma_address(&sg[0]), sg_dma_len(&sg[0]),
dir);
/* restore sg */
@@ -2997,7 +3078,7 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc)
goto skip_map;
}
- dma_address = dma_map_single(ap->host_set->dev, qc->buf_virt,
+ dma_address = dma_map_single(ap->dev, qc->buf_virt,
sg->length, dir);
if (dma_mapping_error(dma_address)) {
/* restore sg */
@@ -3085,7 +3166,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc)
}
dir = qc->dma_dir;
- n_elem = dma_map_sg(ap->host_set->dev, sg, pre_n_elem, dir);
+ n_elem = dma_map_sg(ap->dev, sg, pre_n_elem, dir);
if (n_elem < 1) {
/* restore last sg */
lsg->length += qc->pad_len;
@@ -3616,7 +3697,7 @@ static void ata_pio_error(struct ata_port *ap)
if (qc->tf.command != ATA_CMD_PACKET)
printk(KERN_WARNING "ata%u: PIO error\n", ap->id);
- /* make sure qc->err_mask is available to
+ /* make sure qc->err_mask is available to
* know what's wrong and recover
*/
WARN_ON(qc->err_mask == 0);
@@ -4065,240 +4146,6 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
}
/**
- * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction
- * @qc: Info associated with this ATA transaction.
- *
- * LOCKING:
- * spin_lock_irqsave(host_set lock)
- */
-
-static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
- u8 dmactl;
- void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
-
- /* load PRD table addr. */
- mb(); /* make sure PRD table writes are visible to controller */
- writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS);
-
- /* specify data direction, triple-check start bit is clear */
- dmactl = readb(mmio + ATA_DMA_CMD);
- dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
- if (!rw)
- dmactl |= ATA_DMA_WR;
- writeb(dmactl, mmio + ATA_DMA_CMD);
-
- /* issue r/w command */
- ap->ops->exec_command(ap, &qc->tf);
-}
-
-/**
- * ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction
- * @qc: Info associated with this ATA transaction.
- *
- * LOCKING:
- * spin_lock_irqsave(host_set lock)
- */
-
-static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
- u8 dmactl;
-
- /* start host DMA transaction */
- dmactl = readb(mmio + ATA_DMA_CMD);
- writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD);
-
- /* Strictly, one may wish to issue a readb() here, to
- * flush the mmio write. However, control also passes
- * to the hardware at this point, and it will interrupt
- * us when we are to resume control. So, in effect,
- * we don't care when the mmio write flushes.
- * Further, a read of the DMA status register _immediately_
- * following the write may not be what certain flaky hardware
- * is expected, so I think it is best to not add a readb()
- * without first all the MMIO ATA cards/mobos.
- * Or maybe I'm just being paranoid.
- */
-}
-
-/**
- * ata_bmdma_setup_pio - Set up PCI IDE BMDMA transaction (PIO)
- * @qc: Info associated with this ATA transaction.
- *
- * LOCKING:
- * spin_lock_irqsave(host_set lock)
- */
-
-static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
- u8 dmactl;
-
- /* load PRD table addr. */
- outl(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
-
- /* specify data direction, triple-check start bit is clear */
- dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
- dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
- if (!rw)
- dmactl |= ATA_DMA_WR;
- outb(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
- /* issue r/w command */
- ap->ops->exec_command(ap, &qc->tf);
-}
-
-/**
- * ata_bmdma_start_pio - Start a PCI IDE BMDMA transaction (PIO)
- * @qc: Info associated with this ATA transaction.
- *
- * LOCKING:
- * spin_lock_irqsave(host_set lock)
- */
-
-static void ata_bmdma_start_pio (struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- u8 dmactl;
-
- /* start host DMA transaction */
- dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
- outb(dmactl | ATA_DMA_START,
- ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-}
-
-
-/**
- * ata_bmdma_start - Start a PCI IDE BMDMA transaction
- * @qc: Info associated with this ATA transaction.
- *
- * Writes the ATA_DMA_START flag to the DMA command register.
- *
- * May be used as the bmdma_start() entry in ata_port_operations.
- *
- * LOCKING:
- * spin_lock_irqsave(host_set lock)
- */
-void ata_bmdma_start(struct ata_queued_cmd *qc)
-{
- if (qc->ap->flags & ATA_FLAG_MMIO)
- ata_bmdma_start_mmio(qc);
- else
- ata_bmdma_start_pio(qc);
-}
-
-
-/**
- * ata_bmdma_setup - Set up PCI IDE BMDMA transaction
- * @qc: Info associated with this ATA transaction.
- *
- * Writes address of PRD table to device's PRD Table Address
- * register, sets the DMA control register, and calls
- * ops->exec_command() to start the transfer.
- *
- * May be used as the bmdma_setup() entry in ata_port_operations.
- *
- * LOCKING:
- * spin_lock_irqsave(host_set lock)
- */
-void ata_bmdma_setup(struct ata_queued_cmd *qc)
-{
- if (qc->ap->flags & ATA_FLAG_MMIO)
- ata_bmdma_setup_mmio(qc);
- else
- ata_bmdma_setup_pio(qc);
-}
-
-
-/**
- * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
- * @ap: Port associated with this ATA transaction.
- *
- * Clear interrupt and error flags in DMA status register.
- *
- * May be used as the irq_clear() entry in ata_port_operations.
- *
- * LOCKING:
- * spin_lock_irqsave(host_set lock)
- */
-
-void ata_bmdma_irq_clear(struct ata_port *ap)
-{
- if (!ap->ioaddr.bmdma_addr)
- return;
-
- if (ap->flags & ATA_FLAG_MMIO) {
- void __iomem *mmio =
- ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS;
- writeb(readb(mmio), mmio);
- } else {
- unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS;
- outb(inb(addr), addr);
- }
-}
-
-
-/**
- * ata_bmdma_status - Read PCI IDE BMDMA status
- * @ap: Port associated with this ATA transaction.
- *
- * Read and return BMDMA status register.
- *
- * May be used as the bmdma_status() entry in ata_port_operations.
- *
- * LOCKING:
- * spin_lock_irqsave(host_set lock)
- */
-
-u8 ata_bmdma_status(struct ata_port *ap)
-{
- u8 host_stat;
- if (ap->flags & ATA_FLAG_MMIO) {
- void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
- host_stat = readb(mmio + ATA_DMA_STATUS);
- } else
- host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
- return host_stat;
-}
-
-
-/**
- * ata_bmdma_stop - Stop PCI IDE BMDMA transfer
- * @qc: Command we are ending DMA for
- *
- * Clears the ATA_DMA_START flag in the dma control register
- *
- * May be used as the bmdma_stop() entry in ata_port_operations.
- *
- * LOCKING:
- * spin_lock_irqsave(host_set lock)
- */
-
-void ata_bmdma_stop(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- if (ap->flags & ATA_FLAG_MMIO) {
- void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
-
- /* clear start/stop bit */
- writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
- mmio + ATA_DMA_CMD);
- } else {
- /* clear start/stop bit */
- outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START,
- ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
- }
-
- /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_altstatus(ap); /* dummy read */
-}
-
-/**
* ata_host_intr - Handle host interrupt for given (port, task)
* @ap: Port on which interrupt arrived (possibly...)
* @qc: Taskfile currently active in engine
@@ -4506,14 +4353,15 @@ int ata_device_resume(struct ata_port *ap, struct ata_device *dev)
* Flush the cache on the drive, if appropriate, then issue a
* standbynow command.
*/
-int ata_device_suspend(struct ata_port *ap, struct ata_device *dev)
+int ata_device_suspend(struct ata_port *ap, struct ata_device *dev, pm_message_t state)
{
if (!ata_dev_present(dev))
return 0;
if (dev->class == ATA_DEV_ATA)
ata_flush_cache(ap, dev);
- ata_standby_drive(ap, dev);
+ if (state.event != PM_EVENT_FREEZE)
+ ata_standby_drive(ap, dev);
ap->flags |= ATA_FLAG_SUSPENDED;
return 0;
}
@@ -4533,7 +4381,7 @@ int ata_device_suspend(struct ata_port *ap, struct ata_device *dev)
int ata_port_start (struct ata_port *ap)
{
- struct device *dev = ap->host_set->dev;
+ struct device *dev = ap->dev;
int rc;
ap->prd = dma_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma, GFP_KERNEL);
@@ -4566,7 +4414,7 @@ int ata_port_start (struct ata_port *ap)
void ata_port_stop (struct ata_port *ap)
{
- struct device *dev = ap->host_set->dev;
+ struct device *dev = ap->dev;
dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
ata_pad_free(ap, dev);
@@ -4632,6 +4480,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
ap->host = host;
ap->ctl = ATA_DEVCTL_OBS;
ap->host_set = host_set;
+ ap->dev = ent->dev;
ap->port_no = port_no;
ap->hard_port_no =
ent->legacy_mode ? ent->hard_port_no : port_no;
@@ -4647,8 +4496,13 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
INIT_WORK(&ap->port_task, NULL, NULL);
INIT_LIST_HEAD(&ap->eh_done_q);
- for (i = 0; i < ATA_MAX_DEVICES; i++)
- ap->device[i].devno = i;
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ struct ata_device *dev = &ap->device[i];
+ dev->devno = i;
+ dev->pio_mask = UINT_MAX;
+ dev->mwdma_mask = UINT_MAX;
+ dev->udma_mask = UINT_MAX;
+ }
#ifdef ATA_IRQ_TRAP
ap->stats.unhandled_irq = 1;
@@ -4842,7 +4696,7 @@ err_free_ret:
* ata_host_set_remove - PCI layer callback for device removal
* @host_set: ATA host set that was removed
*
- * Unregister all objects associated with this host set. Free those
+ * Unregister all objects associated with this host set. Free those
* objects.
*
* LOCKING:
@@ -5114,6 +4968,8 @@ EXPORT_SYMBOL_GPL(ata_std_postreset);
EXPORT_SYMBOL_GPL(ata_std_probe_reset);
EXPORT_SYMBOL_GPL(ata_drive_probe_reset);
EXPORT_SYMBOL_GPL(ata_dev_revalidate);
+EXPORT_SYMBOL_GPL(ata_dev_classify);
+EXPORT_SYMBOL_GPL(ata_dev_pair);
EXPORT_SYMBOL_GPL(ata_port_disable);
EXPORT_SYMBOL_GPL(ata_ratelimit);
EXPORT_SYMBOL_GPL(ata_busy_sleep);
@@ -5124,7 +4980,6 @@ EXPORT_SYMBOL_GPL(ata_scsi_error);
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
EXPORT_SYMBOL_GPL(ata_scsi_release);
EXPORT_SYMBOL_GPL(ata_host_intr);
-EXPORT_SYMBOL_GPL(ata_dev_classify);
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index a1259b242b8e..628191bfd990 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -256,7 +256,7 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
scsi_cmd[14] = args[0];
/* Good values for timeout and retries? Values below
- from scsi_ioctl_send_command() for default case... */
+ from scsi_ioctl_send_command() for default case... */
if (scsi_execute_req(scsidev, scsi_cmd, DMA_NONE, NULL, 0, &sshdr,
(10*HZ), 5))
rc = -EIO;
@@ -267,20 +267,8 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
{
- struct ata_port *ap;
- struct ata_device *dev;
int val = -EINVAL, rc = -EINVAL;
- ap = (struct ata_port *) &scsidev->host->hostdata[0];
- if (!ap)
- goto out;
-
- dev = ata_scsi_find_dev(ap, scsidev);
- if (!dev) {
- rc = -ENODEV;
- goto out;
- }
-
switch (cmd) {
case ATA_IOC_GET_IO32:
val = 0;
@@ -309,7 +297,6 @@ int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
break;
}
-out:
return rc;
}
@@ -414,12 +401,12 @@ int ata_scsi_device_resume(struct scsi_device *sdev)
return ata_device_resume(ap, dev);
}
-int ata_scsi_device_suspend(struct scsi_device *sdev)
+int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state)
{
struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
struct ata_device *dev = &ap->device[sdev->id];
- return ata_device_suspend(ap, dev);
+ return ata_device_suspend(ap, dev, state);
}
/**
@@ -438,7 +425,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev)
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
-void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
+void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
u8 *ascq)
{
int i;
@@ -495,7 +482,7 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
/* Look for drv_err */
for (i = 0; sense_table[i][0] != 0xFF; i++) {
/* Look for best matches first */
- if ((sense_table[i][0] & drv_err) ==
+ if ((sense_table[i][0] & drv_err) ==
sense_table[i][0]) {
*sk = sense_table[i][1];
*asc = sense_table[i][2];
@@ -518,7 +505,7 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
}
}
/* No error? Undecoded? */
- printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n",
+ printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n",
id, drv_stat);
/* We need a sensible error return here, which is tricky, and one
@@ -1150,14 +1137,14 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *sc
DPRINTK("block %u track %u cyl %u head %u sect %u\n",
(u32)block, track, cyl, head, sect);
-
- /* Check whether the converted CHS can fit.
- Cylinder: 0-65535
+
+ /* Check whether the converted CHS can fit.
+ Cylinder: 0-65535
Head: 0-15
Sector: 1-255*/
- if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
+ if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
goto out_of_range;
-
+
tf->command = ATA_CMD_VERIFY;
tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
tf->lbal = sect;
@@ -1289,7 +1276,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm
tf->lbal = block & 0xff;
tf->device |= ATA_LBA;
- } else {
+ } else {
/* CHS */
u32 sect, head, cyl, track;
@@ -1309,8 +1296,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm
DPRINTK("block %u track %u cyl %u head %u sect %u\n",
(u32)block, track, cyl, head, sect);
- /* Check whether the converted CHS can fit.
- Cylinder: 0-65535
+ /* Check whether the converted CHS can fit.
+ Cylinder: 0-65535
Head: 0-15
Sector: 1-255*/
if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
@@ -1697,7 +1684,7 @@ unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf,
if (buflen > (ATA_SERNO_LEN + num + 3)) {
/* piv=0, assoc=lu, code_set=ACSII, designator=vendor */
- rbuf[num + 0] = 2;
+ rbuf[num + 0] = 2;
rbuf[num + 3] = ATA_SERNO_LEN;
num += 4;
ata_id_string(args->id, (unsigned char *) rbuf + num,
@@ -1707,8 +1694,8 @@ unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf,
if (buflen > (sat_model_serial_desc_len + num + 3)) {
/* SAT defined lu model and serial numbers descriptor */
/* piv=0, assoc=lu, code_set=ACSII, designator=t10 vendor id */
- rbuf[num + 0] = 2;
- rbuf[num + 1] = 1;
+ rbuf[num + 0] = 2;
+ rbuf[num + 1] = 1;
rbuf[num + 3] = sat_model_serial_desc_len;
num += 4;
memcpy(rbuf + num, "ATA ", 8);
@@ -2597,6 +2584,21 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap,
#endif
}
+static inline void __ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
+ struct ata_port *ap, struct ata_device *dev)
+{
+ if (dev->class == ATA_DEV_ATA) {
+ ata_xlat_func_t xlat_func = ata_get_xlat_func(dev,
+ cmd->cmnd[0]);
+
+ if (xlat_func)
+ ata_scsi_translate(ap, dev, cmd, done, xlat_func);
+ else
+ ata_scsi_simulate(ap, dev, cmd, done);
+ } else
+ ata_scsi_translate(ap, dev, cmd, done, atapi_xlat);
+}
+
/**
* ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device
* @cmd: SCSI command to be sent
@@ -2631,24 +2633,13 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
ata_scsi_dump_cdb(ap, cmd);
dev = ata_scsi_find_dev(ap, scsidev);
- if (unlikely(!dev)) {
+ if (likely(dev))
+ __ata_scsi_queuecmd(cmd, done, ap, dev);
+ else {
cmd->result = (DID_BAD_TARGET << 16);
done(cmd);
- goto out_unlock;
}
- if (dev->class == ATA_DEV_ATA) {
- ata_xlat_func_t xlat_func = ata_get_xlat_func(dev,
- cmd->cmnd[0]);
-
- if (xlat_func)
- ata_scsi_translate(ap, dev, cmd, done, xlat_func);
- else
- ata_scsi_simulate(ap, dev, cmd, done);
- } else
- ata_scsi_translate(ap, dev, cmd, done, atapi_xlat);
-
-out_unlock:
spin_unlock(&ap->host_set->lock);
spin_lock(shost->host_lock);
return 0;
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index e5b20c6afc18..f77bf183dfab 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -29,34 +29,6 @@
* NV-specific details such as register offsets, SATA phy location,
* hotplug info, etc.
*
- * 0.10
- * - Fixed spurious interrupts issue seen with the Maxtor 6H500F0 500GB
- * drive. Also made the check_hotplug() callbacks return whether there
- * was a hotplug interrupt or not. This was not the source of the
- * spurious interrupts, but is the right thing to do anyway.
- *
- * 0.09
- * - Fixed bug introduced by 0.08's MCP51 and MCP55 support.
- *
- * 0.08
- * - Added support for MCP51 and MCP55.
- *
- * 0.07
- * - Added support for RAID class code.
- *
- * 0.06
- * - Added generic SATA support by using a pci_device_id that filters on
- * the IDE storage class code.
- *
- * 0.03
- * - Fixed a bug where the hotplug handlers for non-CK804/MCP04 were using
- * mmio_base, which is only set for the CK804/MCP04 case.
- *
- * 0.02
- * - Added support for CK804 SATA controller.
- *
- * 0.01
- * - Initial revision.
*/
#include <linux/config.h>
@@ -74,53 +46,55 @@
#define DRV_NAME "sata_nv"
#define DRV_VERSION "0.8"
-#define NV_PORTS 2
-#define NV_PIO_MASK 0x1f
-#define NV_MWDMA_MASK 0x07
-#define NV_UDMA_MASK 0x7f
-#define NV_PORT0_SCR_REG_OFFSET 0x00
-#define NV_PORT1_SCR_REG_OFFSET 0x40
-
-#define NV_INT_STATUS 0x10
-#define NV_INT_STATUS_CK804 0x440
-#define NV_INT_STATUS_PDEV_INT 0x01
-#define NV_INT_STATUS_PDEV_PM 0x02
-#define NV_INT_STATUS_PDEV_ADDED 0x04
-#define NV_INT_STATUS_PDEV_REMOVED 0x08
-#define NV_INT_STATUS_SDEV_INT 0x10
-#define NV_INT_STATUS_SDEV_PM 0x20
-#define NV_INT_STATUS_SDEV_ADDED 0x40
-#define NV_INT_STATUS_SDEV_REMOVED 0x80
-#define NV_INT_STATUS_PDEV_HOTPLUG (NV_INT_STATUS_PDEV_ADDED | \
- NV_INT_STATUS_PDEV_REMOVED)
-#define NV_INT_STATUS_SDEV_HOTPLUG (NV_INT_STATUS_SDEV_ADDED | \
- NV_INT_STATUS_SDEV_REMOVED)
-#define NV_INT_STATUS_HOTPLUG (NV_INT_STATUS_PDEV_HOTPLUG | \
- NV_INT_STATUS_SDEV_HOTPLUG)
-
-#define NV_INT_ENABLE 0x11
-#define NV_INT_ENABLE_CK804 0x441
-#define NV_INT_ENABLE_PDEV_MASK 0x01
-#define NV_INT_ENABLE_PDEV_PM 0x02
-#define NV_INT_ENABLE_PDEV_ADDED 0x04
-#define NV_INT_ENABLE_PDEV_REMOVED 0x08
-#define NV_INT_ENABLE_SDEV_MASK 0x10
-#define NV_INT_ENABLE_SDEV_PM 0x20
-#define NV_INT_ENABLE_SDEV_ADDED 0x40
-#define NV_INT_ENABLE_SDEV_REMOVED 0x80
-#define NV_INT_ENABLE_PDEV_HOTPLUG (NV_INT_ENABLE_PDEV_ADDED | \
- NV_INT_ENABLE_PDEV_REMOVED)
-#define NV_INT_ENABLE_SDEV_HOTPLUG (NV_INT_ENABLE_SDEV_ADDED | \
- NV_INT_ENABLE_SDEV_REMOVED)
-#define NV_INT_ENABLE_HOTPLUG (NV_INT_ENABLE_PDEV_HOTPLUG | \
- NV_INT_ENABLE_SDEV_HOTPLUG)
-
-#define NV_INT_CONFIG 0x12
-#define NV_INT_CONFIG_METHD 0x01 // 0 = INT, 1 = SMI
-
-// For PCI config register 20
-#define NV_MCP_SATA_CFG_20 0x50
-#define NV_MCP_SATA_CFG_20_SATA_SPACE_EN 0x04
+enum {
+ NV_PORTS = 2,
+ NV_PIO_MASK = 0x1f,
+ NV_MWDMA_MASK = 0x07,
+ NV_UDMA_MASK = 0x7f,
+ NV_PORT0_SCR_REG_OFFSET = 0x00,
+ NV_PORT1_SCR_REG_OFFSET = 0x40,
+
+ NV_INT_STATUS = 0x10,
+ NV_INT_STATUS_CK804 = 0x440,
+ NV_INT_STATUS_PDEV_INT = 0x01,
+ NV_INT_STATUS_PDEV_PM = 0x02,
+ NV_INT_STATUS_PDEV_ADDED = 0x04,
+ NV_INT_STATUS_PDEV_REMOVED = 0x08,
+ NV_INT_STATUS_SDEV_INT = 0x10,
+ NV_INT_STATUS_SDEV_PM = 0x20,
+ NV_INT_STATUS_SDEV_ADDED = 0x40,
+ NV_INT_STATUS_SDEV_REMOVED = 0x80,
+ NV_INT_STATUS_PDEV_HOTPLUG = (NV_INT_STATUS_PDEV_ADDED |
+ NV_INT_STATUS_PDEV_REMOVED),
+ NV_INT_STATUS_SDEV_HOTPLUG = (NV_INT_STATUS_SDEV_ADDED |
+ NV_INT_STATUS_SDEV_REMOVED),
+ NV_INT_STATUS_HOTPLUG = (NV_INT_STATUS_PDEV_HOTPLUG |
+ NV_INT_STATUS_SDEV_HOTPLUG),
+
+ NV_INT_ENABLE = 0x11,
+ NV_INT_ENABLE_CK804 = 0x441,
+ NV_INT_ENABLE_PDEV_MASK = 0x01,
+ NV_INT_ENABLE_PDEV_PM = 0x02,
+ NV_INT_ENABLE_PDEV_ADDED = 0x04,
+ NV_INT_ENABLE_PDEV_REMOVED = 0x08,
+ NV_INT_ENABLE_SDEV_MASK = 0x10,
+ NV_INT_ENABLE_SDEV_PM = 0x20,
+ NV_INT_ENABLE_SDEV_ADDED = 0x40,
+ NV_INT_ENABLE_SDEV_REMOVED = 0x80,
+ NV_INT_ENABLE_PDEV_HOTPLUG = (NV_INT_ENABLE_PDEV_ADDED |
+ NV_INT_ENABLE_PDEV_REMOVED),
+ NV_INT_ENABLE_SDEV_HOTPLUG = (NV_INT_ENABLE_SDEV_ADDED |
+ NV_INT_ENABLE_SDEV_REMOVED),
+ NV_INT_ENABLE_HOTPLUG = (NV_INT_ENABLE_PDEV_HOTPLUG |
+ NV_INT_ENABLE_SDEV_HOTPLUG),
+
+ NV_INT_CONFIG = 0x12,
+ NV_INT_CONFIG_METHD = 0x01, // 0 = INT, 1 = SMI
+
+ // For PCI config register 20
+ NV_MCP_SATA_CFG_20 = 0x50,
+ NV_MCP_SATA_CFG_20_SATA_SPACE_EN = 0x04,
+};
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static irqreturn_t nv_interrupt (int irq, void *dev_instance,
@@ -175,8 +149,6 @@ static const struct pci_device_id nv_pci_tbl[] = {
{ 0, } /* terminate list */
};
-#define NV_HOST_FLAGS_SCR_MMIO 0x00000001
-
struct nv_host_desc
{
enum nv_host_type host_type;
@@ -332,36 +304,23 @@ static irqreturn_t nv_interrupt (int irq, void *dev_instance,
static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
- struct ata_host_set *host_set = ap->host_set;
- struct nv_host *host = host_set->private_data;
-
if (sc_reg > SCR_CONTROL)
return 0xffffffffU;
- if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
- return readl((void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4));
- else
- return inl(ap->ioaddr.scr_addr + (sc_reg * 4));
+ return ioread32((void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
{
- struct ata_host_set *host_set = ap->host_set;
- struct nv_host *host = host_set->private_data;
-
if (sc_reg > SCR_CONTROL)
return;
- if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
- writel(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4));
- else
- outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
+ iowrite32(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void nv_host_stop (struct ata_host_set *host_set)
{
struct nv_host *host = host_set->private_data;
- struct pci_dev *pdev = to_pci_dev(host_set->dev);
// Disable hotplug event interrupts.
if (host->host_desc->disable_hotplug)
@@ -369,8 +328,7 @@ static void nv_host_stop (struct ata_host_set *host_set)
kfree(host);
- if (host_set->mmio_base)
- pci_iounmap(pdev, host_set->mmio_base);
+ ata_pci_host_stop(host_set);
}
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
@@ -382,6 +340,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
int pci_dev_busy = 0;
int rc;
u32 bar;
+ unsigned long base;
// Make sure this is a SATA controller by counting the number of bars
// (NVIDIA SATA controllers will always have six bars). Otherwise,
@@ -426,31 +385,16 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
probe_ent->private_data = host;
- if (pci_resource_flags(pdev, 5) & IORESOURCE_MEM)
- host->host_flags |= NV_HOST_FLAGS_SCR_MMIO;
-
- if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) {
- unsigned long base;
-
- probe_ent->mmio_base = pci_iomap(pdev, 5, 0);
- if (probe_ent->mmio_base == NULL) {
- rc = -EIO;
- goto err_out_free_host;
- }
-
- base = (unsigned long)probe_ent->mmio_base;
+ probe_ent->mmio_base = pci_iomap(pdev, 5, 0);
+ if (!probe_ent->mmio_base) {
+ rc = -EIO;
+ goto err_out_free_host;
+ }
- probe_ent->port[0].scr_addr =
- base + NV_PORT0_SCR_REG_OFFSET;
- probe_ent->port[1].scr_addr =
- base + NV_PORT1_SCR_REG_OFFSET;
- } else {
+ base = (unsigned long)probe_ent->mmio_base;
- probe_ent->port[0].scr_addr =
- pci_resource_start(pdev, 5) | NV_PORT0_SCR_REG_OFFSET;
- probe_ent->port[1].scr_addr =
- pci_resource_start(pdev, 5) | NV_PORT1_SCR_REG_OFFSET;
- }
+ probe_ent->port[0].scr_addr = base + NV_PORT0_SCR_REG_OFFSET;
+ probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET;
pci_set_master(pdev);
@@ -467,8 +411,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
return 0;
err_out_iounmap:
- if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
- pci_iounmap(pdev, probe_ent->mmio_base);
+ pci_iounmap(pdev, probe_ent->mmio_base);
err_out_free_host:
kfree(host);
err_out_free_ent:
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index 3e75d6733239..18c296c56899 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -371,7 +371,7 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
if (quirks & SIL_QUIRK_UDMA5MAX) {
printk(KERN_INFO "ata%u(%u): applying Maxtor errata fix %s\n",
ap->id, dev->devno, model_num);
- ap->udma_mask &= ATA_UDMA5;
+ dev->udma_mask &= ATA_UDMA5;
return;
}
}
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 5d01e5ce5ac5..068c98a4111b 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -342,7 +342,7 @@ static struct ata_port_info sil24_port_info[] = {
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil24_ops,
},
- /* sil_3132 */
+ /* sil_3132 */
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
@@ -842,9 +842,10 @@ static void sil24_port_stop(struct ata_port *ap)
static void sil24_host_stop(struct ata_host_set *host_set)
{
struct sil24_host_priv *hpriv = host_set->private_data;
+ struct pci_dev *pdev = to_pci_dev(host_set->dev);
- iounmap(hpriv->host_base);
- iounmap(hpriv->port_base);
+ pci_iounmap(pdev, hpriv->host_base);
+ pci_iounmap(pdev, hpriv->port_base);
kfree(hpriv);
}
@@ -871,26 +872,23 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
goto out_disable;
rc = -ENOMEM;
- /* ioremap mmio registers */
- host_base = ioremap(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
+ /* map mmio registers */
+ host_base = pci_iomap(pdev, 0, 0);
if (!host_base)
goto out_free;
- port_base = ioremap(pci_resource_start(pdev, 2),
- pci_resource_len(pdev, 2));
+ port_base = pci_iomap(pdev, 2, 0);
if (!port_base)
goto out_free;
/* allocate & init probe_ent and hpriv */
- probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
if (!probe_ent)
goto out_free;
- hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL);
+ hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
goto out_free;
- memset(probe_ent, 0, sizeof(*probe_ent));
probe_ent->dev = pci_dev_to_dev(pdev);
INIT_LIST_HEAD(&probe_ent->node);
@@ -907,7 +905,6 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
probe_ent->mmio_base = port_base;
probe_ent->private_data = hpriv;
- memset(hpriv, 0, sizeof(*hpriv));
hpriv->host_base = host_base;
hpriv->port_base = port_base;
@@ -1011,9 +1008,9 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
out_free:
if (host_base)
- iounmap(host_base);
+ pci_iounmap(pdev, host_base);
if (port_base)
- iounmap(port_base);
+ pci_iounmap(pdev, port_base);
kfree(probe_ent);
kfree(hpriv);
pci_release_regions(pdev);
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index 8f5025733def..7ac5a5f5a905 100644
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -44,6 +44,8 @@ enum {
uli_5287 = 1,
uli_5281 = 2,
+ uli_max_ports = 4,
+
/* PCI configuration registers */
ULI5287_BASE = 0x90, /* sata0 phy SCR registers */
ULI5287_OFFS = 0x10, /* offset from sata0->sata1 phy regs */
@@ -51,6 +53,10 @@ enum {
ULI5281_OFFS = 0x60, /* offset from sata0->sata1 phy regs */
};
+struct uli_priv {
+ unsigned int scr_cfg_addr[uli_max_ports];
+};
+
static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static u32 uli_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
@@ -137,7 +143,8 @@ MODULE_VERSION(DRV_VERSION);
static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg)
{
- return ap->ioaddr.scr_addr + (4 * sc_reg);
+ struct uli_priv *hpriv = ap->host_set->private_data;
+ return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg);
}
static u32 uli_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
@@ -182,6 +189,7 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
int rc;
unsigned int board_idx = (unsigned int) ent->driver_data;
int pci_dev_busy = 0;
+ struct uli_priv *hpriv;
if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
@@ -210,10 +218,18 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_out_regions;
}
+ hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv) {
+ rc = -ENOMEM;
+ goto err_out_probe_ent;
+ }
+
+ probe_ent->private_data = hpriv;
+
switch (board_idx) {
case uli_5287:
- probe_ent->port[0].scr_addr = ULI5287_BASE;
- probe_ent->port[1].scr_addr = ULI5287_BASE + ULI5287_OFFS;
+ hpriv->scr_cfg_addr[0] = ULI5287_BASE;
+ hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS;
probe_ent->n_ports = 4;
probe_ent->port[2].cmd_addr = pci_resource_start(pdev, 0) + 8;
@@ -221,27 +237,27 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
probe_ent->port[2].ctl_addr =
(pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4;
probe_ent->port[2].bmdma_addr = pci_resource_start(pdev, 4) + 16;
- probe_ent->port[2].scr_addr = ULI5287_BASE + ULI5287_OFFS*4;
+ hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4;
probe_ent->port[3].cmd_addr = pci_resource_start(pdev, 2) + 8;
probe_ent->port[3].altstatus_addr =
probe_ent->port[3].ctl_addr =
(pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4;
probe_ent->port[3].bmdma_addr = pci_resource_start(pdev, 4) + 24;
- probe_ent->port[3].scr_addr = ULI5287_BASE + ULI5287_OFFS*5;
+ hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5;
ata_std_ports(&probe_ent->port[2]);
ata_std_ports(&probe_ent->port[3]);
break;
case uli_5289:
- probe_ent->port[0].scr_addr = ULI5287_BASE;
- probe_ent->port[1].scr_addr = ULI5287_BASE + ULI5287_OFFS;
+ hpriv->scr_cfg_addr[0] = ULI5287_BASE;
+ hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS;
break;
case uli_5281:
- probe_ent->port[0].scr_addr = ULI5281_BASE;
- probe_ent->port[1].scr_addr = ULI5281_BASE + ULI5281_OFFS;
+ hpriv->scr_cfg_addr[0] = ULI5281_BASE;
+ hpriv->scr_cfg_addr[1] = ULI5281_BASE + ULI5281_OFFS;
break;
default:
@@ -258,9 +274,10 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
return 0;
+err_out_probe_ent:
+ kfree(probe_ent);
err_out_regions:
pci_release_regions(pdev);
-
err_out:
if (!pci_dev_busy)
pci_disable_device(pdev);
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 9701a806539d..836bbbb26ff2 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -230,11 +230,11 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance,
handled += ata_host_intr(ap, qc);
} else if (is_vsc_sata_int_err(i, int_status)) {
/*
- * On some chips (i.e. Intel 31244), an error
+ * On some chips (i.e. Intel 31244), an error
* interrupt will sneak in at initialization
* time (phy state changes). Clearing the SCR
* error register is not required, but it prevents
- * the phy state change interrupts from recurring
+ * the phy state change interrupts from recurring
* later.
*/
u32 err_status;
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 89055494dfee..a6fde52946d6 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -286,7 +286,7 @@ static int scsi_bus_suspend(struct device * dev, pm_message_t state)
return err;
if (sht->suspend)
- err = sht->suspend(sdev);
+ err = sht->suspend(sdev, state);
return err;
}
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 7a54244d30aa..047192253c3a 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -358,6 +358,11 @@ struct ata_device {
unsigned int max_sectors; /* per-device max sectors */
unsigned int cdb_len;
+ /* per-dev xfer mask */
+ unsigned int pio_mask;
+ unsigned int mwdma_mask;
+ unsigned int udma_mask;
+
/* for CHS addressing */
u16 cylinders; /* Number of cylinders */
u16 heads; /* Number of heads */
@@ -395,6 +400,7 @@ struct ata_port {
struct ata_host_stats stats;
struct ata_host_set *host_set;
+ struct device *dev;
struct work_struct port_task;
@@ -515,9 +521,9 @@ extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
extern int ata_scsi_release(struct Scsi_Host *host);
extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
extern int ata_scsi_device_resume(struct scsi_device *);
-extern int ata_scsi_device_suspend(struct scsi_device *);
+extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t state);
extern int ata_device_resume(struct ata_port *, struct ata_device *);
-extern int ata_device_suspend(struct ata_port *, struct ata_device *);
+extern int ata_device_suspend(struct ata_port *, struct ata_device *, pm_message_t state);
extern int ata_ratelimit(void);
extern unsigned int ata_busy_sleep(struct ata_port *ap,
unsigned long timeout_pat,
@@ -568,6 +574,8 @@ extern int ata_std_bios_param(struct scsi_device *sdev,
struct block_device *bdev,
sector_t capacity, int geom[]);
extern int ata_scsi_slave_config(struct scsi_device *sdev);
+extern struct ata_device *ata_dev_pair(struct ata_port *ap,
+ struct ata_device *adev);
/*
* Timing helpers
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index a6cf3e535c0b..dc6862d09e53 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -286,7 +286,7 @@ struct scsi_host_template {
* suspend support
*/
int (*resume)(struct scsi_device *);
- int (*suspend)(struct scsi_device *);
+ int (*suspend)(struct scsi_device *, pm_message_t state);
/*
* Name of proc directory