summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/Kconfig9
-rw-r--r--arch/powerpc/configs/g5_defconfig261
-rw-r--r--arch/powerpc/kernel/misc_64.S70
-rw-r--r--arch/powerpc/kernel/process.c4
-rw-r--r--arch/powerpc/kernel/prom.c21
-rw-r--r--arch/powerpc/kernel/prom_init.c11
-rw-r--r--arch/powerpc/kernel/rtas.c5
-rw-r--r--arch/powerpc/kernel/setup-common.c40
-rw-r--r--arch/powerpc/kernel/setup_32.c1
-rw-r--r--arch/powerpc/kernel/setup_64.c46
-rw-r--r--arch/powerpc/kernel/signal_32.c1
-rw-r--r--arch/powerpc/kernel/signal_64.c1
-rw-r--r--arch/powerpc/kernel/smp.c1
-rw-r--r--arch/powerpc/kernel/time.c5
-rw-r--r--arch/powerpc/kernel/traps.c11
-rw-r--r--arch/powerpc/lib/locks.c1
-rw-r--r--arch/powerpc/mm/fault.c17
-rw-r--r--arch/powerpc/mm/hash_utils_64.c10
-rw-r--r--arch/powerpc/mm/init_64.c1
-rw-r--r--arch/powerpc/mm/mem.c2
-rw-r--r--arch/powerpc/mm/numa.c1
-rw-r--r--arch/powerpc/mm/pgtable_64.c1
-rw-r--r--arch/powerpc/oprofile/op_model_power4.c24
-rw-r--r--arch/powerpc/platforms/iseries/irq.c5
-rw-r--r--arch/powerpc/platforms/iseries/pci.c37
-rw-r--r--arch/powerpc/platforms/iseries/setup.c4
-rw-r--r--arch/powerpc/platforms/iseries/smp.c1
-rw-r--r--arch/powerpc/platforms/powermac/Makefile3
-rw-r--r--arch/powerpc/platforms/powermac/cpufreq_32.c (renamed from arch/powerpc/platforms/powermac/cpufreq.c)15
-rw-r--r--arch/powerpc/platforms/powermac/cpufreq_64.c323
-rw-r--r--arch/powerpc/platforms/powermac/setup.c13
-rw-r--r--arch/powerpc/platforms/pseries/iommu.c2
-rw-r--r--arch/powerpc/platforms/pseries/lpar.c3
-rw-r--r--arch/powerpc/platforms/pseries/plpar_wrappers.h10
-rw-r--r--arch/powerpc/platforms/pseries/ras.c2
-rw-r--r--arch/powerpc/platforms/pseries/setup.c18
-rw-r--r--arch/powerpc/sysdev/i8259.c5
-rw-r--r--arch/powerpc/sysdev/u3_iommu.c1
-rw-r--r--arch/ppc/kernel/misc.S145
-rw-r--r--arch/ppc/kernel/traps.c12
-rw-r--r--arch/ppc/syslib/m8xx_wdt.c13
-rw-r--r--arch/ppc/syslib/prom.c4
-rw-r--r--arch/ppc/xmon/xmon.c5
-rw-r--r--arch/ppc64/Kconfig11
-rw-r--r--arch/ppc64/Kconfig.debug4
-rw-r--r--arch/ppc64/kernel/idle.c1
-rw-r--r--arch/ppc64/kernel/machine_kexec.c1
-rw-r--r--arch/ppc64/kernel/misc.S72
-rw-r--r--arch/ppc64/kernel/pci.c17
-rw-r--r--arch/ppc64/kernel/prom.c25
-rw-r--r--arch/ppc64/kernel/prom_init.c3
-rw-r--r--arch/ppc64/kernel/rtas_pci.c6
-rw-r--r--arch/ppc64/kernel/udbg.c55
-rw-r--r--drivers/block/swim3.c20
-rw-r--r--drivers/ide/ppc/pmac.c9
-rw-r--r--drivers/macintosh/Kconfig19
-rw-r--r--drivers/macintosh/Makefile9
-rw-r--r--drivers/macintosh/smu.c174
-rw-r--r--drivers/macintosh/via-pmu.c10
-rw-r--r--drivers/macintosh/windfarm.h131
-rw-r--r--drivers/macintosh/windfarm_core.c426
-rw-r--r--drivers/macintosh/windfarm_cpufreq_clamp.c105
-rw-r--r--drivers/macintosh/windfarm_lm75_sensor.c263
-rw-r--r--drivers/macintosh/windfarm_pid.c145
-rw-r--r--drivers/macintosh/windfarm_pid.h84
-rw-r--r--drivers/macintosh/windfarm_pm81.c879
-rw-r--r--drivers/macintosh/windfarm_pm91.c814
-rw-r--r--drivers/macintosh/windfarm_smu_controls.c282
-rw-r--r--drivers/macintosh/windfarm_smu_sensors.c479
-rw-r--r--fs/proc/proc_devtree.c57
-rw-r--r--include/asm-powerpc/ide.h (renamed from include/asm-ppc/ide.h)29
-rw-r--r--include/asm-powerpc/machdep.h4
-rw-r--r--include/asm-powerpc/ppc-pci.h1
-rw-r--r--include/asm-powerpc/prom.h2
-rw-r--r--include/asm-powerpc/reg.h9
-rw-r--r--include/asm-powerpc/smp.h4
-rw-r--r--include/asm-powerpc/smu.h199
-rw-r--r--include/asm-powerpc/xmon.h1
-rw-r--r--include/asm-ppc/btext.h22
-rw-r--r--include/asm-ppc/io.h12
-rw-r--r--include/asm-ppc/kgdb.h2
-rw-r--r--include/asm-ppc/prom.h2
-rw-r--r--include/asm-ppc64/ide.h30
-rw-r--r--include/asm-ppc64/pci.h8
-rw-r--r--include/asm-ppc64/ppcdebug.h108
-rw-r--r--include/asm-ppc64/prom.h2
-rw-r--r--include/asm-ppc64/udbg.h3
-rw-r--r--include/linux/proc_fs.h9
88 files changed, 5134 insertions, 579 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 6ffae2d2b3fa..1493c7896fe3 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -404,6 +404,14 @@ config CPU_FREQ_PMAC
this currently includes some models of iBook & Titanium
PowerBook.
+config CPU_FREQ_PMAC64
+ bool "Support for some Apple G5s"
+ depends on CPU_FREQ && PMAC_SMU && PPC64
+ select CPU_FREQ_TABLE
+ help
+ This adds support for frequency switching on Apple iMac G5,
+ and some of the more recent desktop G5 machines as well.
+
config PPC601_SYNC_FIX
bool "Workarounds for PPC601 bugs"
depends on 6xx && (PPC_PREP || PPC_PMAC)
@@ -484,6 +492,7 @@ source "fs/Kconfig.binfmt"
config FORCE_MAX_ZONEORDER
int
depends on PPC64
+ default "9" if PPC_64K_PAGES
default "13"
config MATH_EMULATION
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 6323065fbf2c..e76854f8c121 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,18 +1,32 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:30:23 2005
+# Linux kernel version: 2.6.14
+# Mon Nov 7 13:37:59 2005
#
+CONFIG_PPC64=y
CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+
+#
+# Processor support
+#
+CONFIG_POWER4_ONLY=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
#
# Code maturity level options
@@ -67,30 +81,60 @@ CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
#
# Platform support
#
-# CONFIG_PPC_ISERIES is not set
CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
# CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_BPA is not set
CONFIG_PPC_PMAC=y
+CONFIG_PPC_PMAC64=y
# CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
+# CONFIG_PPC_CELL is not set
CONFIG_PPC_OF=y
-CONFIG_MPIC=y
-CONFIG_ALTIVEC=y
-CONFIG_KEXEC=y
CONFIG_U3_DART=y
-CONFIG_PPC_PMAC64=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_POWER4_ONLY=y
+CONFIG_MPIC=y
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_PMAC64=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -100,28 +144,21 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG_CPU is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
-# Bus Options
+# Bus options
#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
@@ -136,6 +173,7 @@ CONFIG_PCI_LEGACY_PROC=y
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
+CONFIG_KERNEL_START=0xc000000000000000
#
# Networking
@@ -276,6 +314,10 @@ CONFIG_LLC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@@ -348,6 +390,11 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ATA_OVER_ETH is not set
#
@@ -449,6 +496,7 @@ CONFIG_SCSI_SPI_ATTRS=y
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -465,10 +513,12 @@ CONFIG_SCSI_SATA_SVW=y
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
@@ -567,6 +617,9 @@ CONFIG_IEEE1394_RAWIO=y
CONFIG_ADB_PMU=y
CONFIG_PMAC_SMU=y
CONFIG_THERM_PM72=y
+CONFIG_WINDFARM=y
+CONFIG_WINDFARM_PM81=y
+CONFIG_WINDFARM_PM91=y
#
# Network device support
@@ -603,6 +656,7 @@ CONFIG_SUNGEM=y
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_FEC_8XX is not set
#
# Ethernet (1000 Mbit)
@@ -768,6 +822,7 @@ CONFIG_MAX_RAW_DEVS=256
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -820,6 +875,7 @@ CONFIG_I2C_PMAC_SMU=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -876,10 +932,9 @@ CONFIG_FB_OF=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_NVIDIA is not set
-CONFIG_FB_RIVA=y
-# CONFIG_FB_RIVA_I2C is not set
-# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_NVIDIA=y
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
@@ -924,7 +979,96 @@ CONFIG_LCD_DEVICE=y
#
# Sound
#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# ALSA PowerMac devices
+#
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_POWERMAC_AUTO_DRC=y
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_USX2Y is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
#
# USB support
@@ -958,12 +1102,16 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=y
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1074,6 +1222,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
@@ -1311,6 +1460,20 @@ CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+
+#
# Profiling support
#
CONFIG_PROFILING=y
@@ -1331,12 +1494,14 @@ CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUGGER is not set
-# CONFIG_PPCDBG is not set
CONFIG_IRQSTACKS=y
+CONFIG_BOOTX_TEXT=y
#
# Security options
@@ -1376,17 +1541,3 @@ CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index b3e95ff0dba0..ae1433da09b2 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -604,6 +604,76 @@ _GLOBAL(real_writeb)
#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */
/*
+ * SCOM access functions for 970 (FX only for now)
+ *
+ * unsigned long scom970_read(unsigned int address);
+ * void scom970_write(unsigned int address, unsigned long value);
+ *
+ * The address passed in is the 24 bits register address. This code
+ * is 970 specific and will not check the status bits, so you should
+ * know what you are doing.
+ */
+_GLOBAL(scom970_read)
+ /* interrupts off */
+ mfmsr r4
+ ori r0,r4,MSR_EE
+ xori r0,r0,MSR_EE
+ mtmsrd r0,1
+
+ /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
+ * (including parity). On current CPUs they must be 0'd,
+ * and finally or in RW bit
+ */
+ rlwinm r3,r3,8,0,15
+ ori r3,r3,0x8000
+
+ /* do the actual scom read */
+ sync
+ mtspr SPRN_SCOMC,r3
+ isync
+ mfspr r3,SPRN_SCOMD
+ isync
+ mfspr r0,SPRN_SCOMC
+ isync
+
+ /* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah
+ * that's the best we can do). Not implemented yet as we don't use
+ * the scom on any of the bogus CPUs yet, but may have to be done
+ * ultimately
+ */
+
+ /* restore interrupts */
+ mtmsrd r4,1
+ blr
+
+
+_GLOBAL(scom970_write)
+ /* interrupts off */
+ mfmsr r5
+ ori r0,r5,MSR_EE
+ xori r0,r0,MSR_EE
+ mtmsrd r0,1
+
+ /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
+ * (including parity). On current CPUs they must be 0'd.
+ */
+
+ rlwinm r3,r3,8,0,15
+
+ sync
+ mtspr SPRN_SCOMD,r4 /* write data */
+ isync
+ mtspr SPRN_SCOMC,r3 /* write command */
+ isync
+ mfspr 3,SPRN_SCOMC
+ isync
+
+ /* restore interrupts */
+ mtmsrd r5,1
+ blr
+
+
+/*
* Create a kernel thread
* kernel_thread(fn, arg, flags)
*/
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 7f64f0464d44..de69fb37c731 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -46,10 +46,10 @@
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/prom.h>
+#include <asm/machdep.h>
#ifdef CONFIG_PPC64
#include <asm/firmware.h>
#include <asm/time.h>
-#include <asm/machdep.h>
#endif
extern unsigned long _get_SP(void);
@@ -203,10 +203,8 @@ int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs)
int set_dabr(unsigned long dabr)
{
-#ifdef CONFIG_PPC64
if (ppc_md.set_dabr)
return ppc_md.set_dabr(dabr);
-#endif
mtspr(SPRN_DABR, dabr);
return 0;
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 3675ef4bac90..f645adb57534 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -1974,14 +1974,29 @@ EXPORT_SYMBOL(get_property);
/*
* Add a property to a node
*/
-void prom_add_property(struct device_node* np, struct property* prop)
+int prom_add_property(struct device_node* np, struct property* prop)
{
- struct property **next = &np->properties;
+ struct property **next;
prop->next = NULL;
- while (*next)
+ write_lock(&devtree_lock);
+ next = &np->properties;
+ while (*next) {
+ if (strcmp(prop->name, (*next)->name) == 0) {
+ /* duplicate ! don't insert it */
+ write_unlock(&devtree_lock);
+ return -1;
+ }
next = &(*next)->next;
+ }
*next = prop;
+ write_unlock(&devtree_lock);
+
+ /* try to add to proc as well if it was initialized */
+ if (np->pde)
+ proc_device_tree_add_prop(np->pde, prop);
+
+ return 0;
}
/* I quickly hacked that one, check against spec ! */
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index c758b6624d7b..6dc33d19fc2a 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -403,19 +403,19 @@ static int __init prom_next_node(phandle *nodep)
}
}
-static int __init prom_getprop(phandle node, const char *pname,
+static int inline prom_getprop(phandle node, const char *pname,
void *value, size_t valuelen)
{
return call_prom("getprop", 4, 1, node, ADDR(pname),
(u32)(unsigned long) value, (u32) valuelen);
}
-static int __init prom_getproplen(phandle node, const char *pname)
+static int inline prom_getproplen(phandle node, const char *pname)
{
return call_prom("getproplen", 2, 1, node, ADDR(pname));
}
-static int __init prom_setprop(phandle node, const char *pname,
+static int inline prom_setprop(phandle node, const char *pname,
void *value, size_t valuelen)
{
return call_prom("setprop", 4, 1, node, ADDR(pname),
@@ -1408,8 +1408,9 @@ static int __init prom_find_machine_type(void)
struct prom_t *_prom = &RELOC(prom);
char compat[256];
int len, i = 0;
+#ifdef CONFIG_PPC64
phandle rtas;
-
+#endif
len = prom_getprop(_prom->root, "compatible",
compat, sizeof(compat)-1);
if (len > 0) {
@@ -1872,7 +1873,7 @@ static void __init fixup_device_tree(void)
if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev))
== PROM_ERROR)
return;
- if (u3_rev != 0x35 && u3_rev != 0x37)
+ if (u3_rev < 0x35 || u3_rev > 0x39)
return;
/* does it need fixup ? */
if (prom_getproplen(i2c, "interrupts") > 0)
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index b7fc2d884950..9d4e07f6f1ec 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -17,6 +17,7 @@
#include <linux/spinlock.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/delay.h>
#include <asm/prom.h>
#include <asm/rtas.h>
@@ -83,7 +84,7 @@ void call_rtas_display_status_delay(unsigned char c)
while (width-- > 0)
call_rtas_display_status(' ');
width = 16;
- udelay(500000);
+ mdelay(500);
pending_newline = 1;
} else {
if (pending_newline) {
@@ -608,7 +609,6 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
return 0;
}
-#ifdef CONFIG_SMP
/* This version can't take the spinlock, because it never returns */
struct rtas_args rtas_stop_self_args = {
@@ -633,7 +633,6 @@ void rtas_stop_self(void)
panic("Alas, I survived.\n");
}
-#endif
/*
* Call early during boot, before mem init or bootmem, to retreive the RTAS
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index d43fa8c0e5ac..e22856ecb5a0 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -405,6 +405,46 @@ static int __init set_preferred_console(void)
console_initcall(set_preferred_console);
#endif /* CONFIG_PPC_MULTIPLATFORM */
+void __init check_for_initrd(void)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+ unsigned long *prop;
+
+ DBG(" -> check_for_initrd()\n");
+
+ if (of_chosen) {
+ prop = (unsigned long *)get_property(of_chosen,
+ "linux,initrd-start", NULL);
+ if (prop != NULL) {
+ initrd_start = (unsigned long)__va(*prop);
+ prop = (unsigned long *)get_property(of_chosen,
+ "linux,initrd-end", NULL);
+ if (prop != NULL) {
+ initrd_end = (unsigned long)__va(*prop);
+ initrd_below_start_ok = 1;
+ } else
+ initrd_start = 0;
+ }
+ }
+
+ /* If we were passed an initrd, set the ROOT_DEV properly if the values
+ * look sensible. If not, clear initrd reference.
+ */
+ if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE &&
+ initrd_end > initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else {
+ printk("Bogus initrd %08lx %08lx\n", initrd_start, initrd_end);
+ initrd_start = initrd_end = 0;
+ }
+
+ if (initrd_start)
+ printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end);
+
+ DBG(" <- check_for_initrd()\n");
+#endif /* CONFIG_BLK_DEV_INITRD */
+}
+
#ifdef CONFIG_SMP
/**
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index b45eedbb4b3a..3af2631e3fab 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -286,6 +286,7 @@ void __init setup_arch(char **cmdline_p)
loops_per_jiffy = 500000000 / HZ;
unflatten_device_tree();
+ check_for_initrd();
finish_device_tree();
smp_setup_cpu_maps();
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index b0994050024f..0471e843b6c5 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -41,7 +41,6 @@
#include <asm/elf.h>
#include <asm/machdep.h>
#include <asm/paca.h>
-#include <asm/ppcdebug.h>
#include <asm/time.h>
#include <asm/cputable.h>
#include <asm/sections.h>
@@ -60,6 +59,7 @@
#include <asm/firmware.h>
#include <asm/systemcfg.h>
#include <asm/xmon.h>
+#include <asm/udbg.h>
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
@@ -244,12 +244,6 @@ void __init early_setup(unsigned long dt_ptr)
DBG(" -> early_setup()\n");
/*
- * Fill the default DBG level (do we want to keep
- * that old mecanism around forever ?)
- */
- ppcdbg_initialize();
-
- /*
* Do early initializations using the flattened device
* tree, like retreiving the physical memory map or
* calculating/retreiving the hash table size
@@ -401,43 +395,6 @@ static void __init initialize_cache_info(void)
DBG(" <- initialize_cache_info()\n");
}
-static void __init check_for_initrd(void)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
- u64 *prop;
-
- DBG(" -> check_for_initrd()\n");
-
- if (of_chosen) {
- prop = (u64 *)get_property(of_chosen,
- "linux,initrd-start", NULL);
- if (prop != NULL) {
- initrd_start = (unsigned long)__va(*prop);
- prop = (u64 *)get_property(of_chosen,
- "linux,initrd-end", NULL);
- if (prop != NULL) {
- initrd_end = (unsigned long)__va(*prop);
- initrd_below_start_ok = 1;
- } else
- initrd_start = 0;
- }
- }
-
- /* If we were passed an initrd, set the ROOT_DEV properly if the values
- * look sensible. If not, clear initrd reference.
- */
- if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE &&
- initrd_end > initrd_start)
- ROOT_DEV = Root_RAM0;
- else
- initrd_start = initrd_end = 0;
-
- if (initrd_start)
- printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end);
-
- DBG(" <- check_for_initrd()\n");
-#endif /* CONFIG_BLK_DEV_INITRD */
-}
/*
* Do some initial setup of the system. The parameters are those which
@@ -521,7 +478,6 @@ void __init setup_system(void)
printk("-----------------------------------------------------\n");
printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size);
- printk("ppc64_debug_switch = 0x%lx\n", ppc64_debug_switch);
printk("ppc64_interrupt_controller = 0x%ld\n", ppc64_interrupt_controller);
printk("systemcfg = 0x%p\n", systemcfg);
printk("systemcfg->platform = 0x%x\n", systemcfg->platform);
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 876c57c11365..081d931eae48 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -44,7 +44,6 @@
#include <asm/cacheflush.h>
#ifdef CONFIG_PPC64
#include "ppc32.h"
-#include <asm/ppcdebug.h>
#include <asm/unistd.h>
#include <asm/vdso.h>
#else
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index ec9d0984b6a0..58194e150711 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -33,7 +33,6 @@
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
-#include <asm/ppcdebug.h>
#include <asm/unistd.h>
#include <asm/cacheflush.h>
#include <asm/vdso.h>
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 1794a694a928..5c330c3366e4 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -40,7 +40,6 @@
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/time.h>
-#include <asm/xmon.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/system.h>
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index b1c89bc4bf90..a6282b625b44 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -61,6 +61,7 @@
#include <asm/prom.h>
#include <asm/irq.h>
#include <asm/div64.h>
+#include <asm/smp.h>
#ifdef CONFIG_PPC64
#include <asm/systemcfg.h>
#include <asm/firmware.h>
@@ -119,10 +120,6 @@ static unsigned adjusting_time = 0;
unsigned long ppc_proc_freq;
unsigned long ppc_tb_freq;
-#ifdef CONFIG_PPC32 /* XXX for now */
-#define boot_cpuid 0
-#endif
-
u64 tb_last_jiffy __cacheline_aligned_in_smp;
unsigned long tb_last_stamp;
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 07e5ee40b870..32f215825e8d 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -39,7 +39,6 @@
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/rtas.h>
-#include <asm/xmon.h>
#include <asm/pmc.h>
#ifdef CONFIG_PPC32
#include <asm/reg.h>
@@ -748,22 +747,12 @@ static int check_bug_trap(struct pt_regs *regs)
return 0;
if (bug->line & BUG_WARNING_TRAP) {
/* this is a WARN_ON rather than BUG/BUG_ON */
-#ifdef CONFIG_XMON
- xmon_printf(KERN_ERR "Badness in %s at %s:%ld\n",
- bug->function, bug->file,
- bug->line & ~BUG_WARNING_TRAP);
-#endif /* CONFIG_XMON */
printk(KERN_ERR "Badness in %s at %s:%ld\n",
bug->function, bug->file,
bug->line & ~BUG_WARNING_TRAP);
dump_stack();
return 1;
}
-#ifdef CONFIG_XMON
- xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%ld!\n",
- bug->function, bug->file, bug->line);
- xmon(regs);
-#endif /* CONFIG_XMON */
printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n",
bug->function, bug->file, bug->line);
diff --git a/arch/powerpc/lib/locks.c b/arch/powerpc/lib/locks.c
index 2a912f411eb4..35bd03c41dd1 100644
--- a/arch/powerpc/lib/locks.c
+++ b/arch/powerpc/lib/locks.c
@@ -23,6 +23,7 @@
#if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES)
#include <asm/hvcall.h>
#include <asm/iseries/hv_call.h>
+#include <asm/smp.h>
void __spin_yield(raw_spinlock_t *lock)
{
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 841d8b6323a8..93d4fbfdb724 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -389,5 +389,22 @@ void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
}
/* kernel has accessed a bad area */
+
+ printk(KERN_ALERT "Unable to handle kernel paging request for ");
+ switch (regs->trap) {
+ case 0x300:
+ case 0x380:
+ printk("data at address 0x%08lx\n", regs->dar);
+ break;
+ case 0x400:
+ case 0x480:
+ printk("instruction fetch\n");
+ break;
+ default:
+ printk("unknown fault\n");
+ }
+ printk(KERN_ALERT "Faulting instruction address: 0x%08lx\n",
+ regs->nip);
+
die("Kernel access of bad area", regs, sig);
}
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index f15dfb92dec0..22e474876133 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -33,7 +33,6 @@
#include <linux/init.h>
#include <linux/signal.h>
-#include <asm/ppcdebug.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>
@@ -409,12 +408,6 @@ void __init htab_initialize(void)
htab_size_bytes = htab_get_table_size();
pteg_count = htab_size_bytes >> 7;
- /* For debug, make the HTAB 1/8 as big as it normally would be. */
- ifppcdebug(PPCDBG_HTABSIZE) {
- pteg_count >>= 3;
- htab_size_bytes = pteg_count << 7;
- }
-
htab_hash_mask = pteg_count - 1;
if (systemcfg->platform & PLATFORM_LPAR) {
@@ -514,6 +507,9 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap)
{
struct page *page;
+ if (!pfn_valid(pte_pfn(pte)))
+ return pp;
+
page = pte_page(pte);
/* page is dirty */
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index dfe7fa37b41a..ce974c83d88a 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -57,7 +57,6 @@
#include <asm/processor.h>
#include <asm/mmzone.h>
#include <asm/cputable.h>
-#include <asm/ppcdebug.h>
#include <asm/sections.h>
#include <asm/system.h>
#include <asm/iommu.h>
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 7faa46b71f21..6f55efd9be95 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -358,7 +358,7 @@ void __init mem_init(void)
}
codesize = (unsigned long)&_sdata - (unsigned long)&_stext;
- datasize = (unsigned long)&__init_begin - (unsigned long)&_sdata;
+ datasize = (unsigned long)&_edata - (unsigned long)&_sdata;
initsize = (unsigned long)&__init_end - (unsigned long)&__init_begin;
bsssize = (unsigned long)&__bss_stop - (unsigned long)&__bss_start;
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 4035cad8d7f1..da09ba03c424 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -21,6 +21,7 @@
#include <asm/machdep.h>
#include <asm/abs_addr.h>
#include <asm/system.h>
+#include <asm/smp.h>
static int numa_enabled = 1;
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 51b786940971..900842451bd3 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -59,7 +59,6 @@
#include <asm/processor.h>
#include <asm/mmzone.h>
#include <asm/cputable.h>
-#include <asm/ppcdebug.h>
#include <asm/sections.h>
#include <asm/system.h>
#include <asm/iommu.h>
diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
index 886449315847..c4ee5478427b 100644
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ b/arch/powerpc/oprofile/op_model_power4.c
@@ -17,6 +17,7 @@
#include <asm/systemcfg.h>
#include <asm/rtas.h>
#include <asm/oprofile_impl.h>
+#include <asm/reg.h>
#define dbg(args...)
@@ -81,6 +82,26 @@ static void power4_reg_setup(struct op_counter_config *ctr,
extern void ppc64_enable_pmcs(void);
+/*
+ * Older CPUs require the MMCRA sample bit to be always set, but newer
+ * CPUs only want it set for some groups. Eventually we will remove all
+ * knowledge of this bit in the kernel, oprofile userspace should be
+ * setting it when required.
+ *
+ * In order to keep current installations working we force the bit for
+ * those older CPUs. Once everyone has updated their oprofile userspace we
+ * can remove this hack.
+ */
+static inline int mmcra_must_set_sample(void)
+{
+ if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) ||
+ __is_processor(PV_970) || __is_processor(PV_970FX) ||
+ __is_processor(PV_970MP))
+ return 1;
+
+ return 0;
+}
+
static void power4_cpu_setup(void *unused)
{
unsigned int mmcr0 = mmcr0_val;
@@ -98,7 +119,8 @@ static void power4_cpu_setup(void *unused)
mtspr(SPRN_MMCR1, mmcr1_val);
- mmcra |= MMCRA_SAMPLE_ENABLE;
+ if (mmcra_must_set_sample())
+ mmcra |= MMCRA_SAMPLE_ENABLE;
mtspr(SPRN_MMCRA, mmcra);
dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(),
diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c
index c1135912cc05..a06603d84a45 100644
--- a/arch/powerpc/platforms/iseries/irq.c
+++ b/arch/powerpc/platforms/iseries/irq.c
@@ -35,7 +35,6 @@
#include <linux/irq.h>
#include <linux/spinlock.h>
-#include <asm/ppcdebug.h>
#include <asm/iseries/hv_types.h>
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/hv_call_xm.h>
@@ -227,8 +226,6 @@ static void iSeries_enable_IRQ(unsigned int irq)
/* Unmask secondary INTA */
mask = 0x80000000;
HvCallPci_unmaskInterrupts(bus, subBus, deviceId, mask);
- PPCDBG(PPCDBG_BUSWALK, "iSeries_enable_IRQ 0x%02X.%02X.%02X 0x%04X\n",
- bus, subBus, deviceId, irq);
}
/* This is called by iSeries_activate_IRQs */
@@ -310,8 +307,6 @@ static void iSeries_disable_IRQ(unsigned int irq)
/* Mask secondary INTA */
mask = 0x80000000;
HvCallPci_maskInterrupts(bus, subBus, deviceId, mask);
- PPCDBG(PPCDBG_BUSWALK, "iSeries_disable_IRQ 0x%02X.%02X.%02X 0x%04X\n",
- bus, subBus, deviceId, irq);
}
/*
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 7d7d5884343f..4b75131773a6 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -32,7 +32,6 @@
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
-#include <asm/ppcdebug.h>
#include <asm/iommu.h>
#include <asm/abs_addr.h>
@@ -207,10 +206,6 @@ static struct device_node *build_device_node(HvBusNumber Bus,
struct device_node *node;
struct pci_dn *pdn;
- PPCDBG(PPCDBG_BUSWALK,
- "-build_device_node 0x%02X.%02X.%02X Function: %02X\n",
- Bus, SubBus, AgentId, Function);
-
node = kmalloc(sizeof(struct device_node), GFP_KERNEL);
if (node == NULL)
return NULL;
@@ -243,8 +238,6 @@ unsigned long __init find_and_init_phbs(void)
struct pci_controller *phb;
HvBusNumber bus;
- PPCDBG(PPCDBG_BUSWALK, "find_and_init_phbs Entry\n");
-
/* Check all possible buses. */
for (bus = 0; bus < 256; bus++) {
int ret = HvCallXm_testBus(bus);
@@ -261,9 +254,6 @@ unsigned long __init find_and_init_phbs(void)
phb->last_busno = bus;
phb->ops = &iSeries_pci_ops;
- PPCDBG(PPCDBG_BUSWALK, "PCI:Create iSeries pci_controller(%p), Bus: %04X\n",
- phb, bus);
-
/* Find and connect the devices. */
scan_PHB_slots(phb);
}
@@ -285,11 +275,9 @@ unsigned long __init find_and_init_phbs(void)
*/
void iSeries_pcibios_init(void)
{
- PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Entry.\n");
iomm_table_initialize();
find_and_init_phbs();
io_page_mask = -1;
- PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Exit.\n");
}
/*
@@ -301,8 +289,6 @@ void __init iSeries_pci_final_fixup(void)
struct device_node *node;
int DeviceCount = 0;
- PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup Entry.\n");
-
/* Fix up at the device node and pci_dev relationship */
mf_display_src(0xC9000100);
@@ -316,9 +302,6 @@ void __init iSeries_pci_final_fixup(void)
++DeviceCount;
pdev->sysdata = (void *)node;
PCI_DN(node)->pcidev = pdev;
- PPCDBG(PPCDBG_BUSWALK,
- "pdev 0x%p <==> DevNode 0x%p\n",
- pdev, node);
allocate_device_bars(pdev);
iSeries_Device_Information(pdev, DeviceCount);
iommu_devnode_init_iSeries(node);
@@ -333,13 +316,10 @@ void __init iSeries_pci_final_fixup(void)
void pcibios_fixup_bus(struct pci_bus *PciBus)
{
- PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup_bus(0x%04X) Entry.\n",
- PciBus->number);
}
void pcibios_fixup_resources(struct pci_dev *pdev)
{
- PPCDBG(PPCDBG_BUSWALK, "fixup_resources pdev %p\n", pdev);
}
/*
@@ -401,9 +381,6 @@ static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus,
printk("found device at bus %d idsel %d func %d (AgentId %x)\n",
bus, IdSel, Function, AgentId);
/* Connect EADs: 0x18.00.12 = 0x00 */
- PPCDBG(PPCDBG_BUSWALK,
- "PCI:Connect EADs: 0x%02X.%02X.%02X\n",
- bus, SubBus, AgentId);
HvRc = HvCallPci_getBusUnitInfo(bus, SubBus, AgentId,
iseries_hv_addr(BridgeInfo),
sizeof(struct HvCallPci_BridgeInfo));
@@ -414,14 +391,6 @@ static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus,
BridgeInfo->maxAgents,
BridgeInfo->maxSubBusNumber,
BridgeInfo->logicalSlotNumber);
- PPCDBG(PPCDBG_BUSWALK,
- "PCI: BridgeInfo, Type:0x%02X, SubBus:0x%02X, MaxAgents:0x%02X, MaxSubBus: 0x%02X, LSlot: 0x%02X\n",
- BridgeInfo->busUnitInfo.deviceType,
- BridgeInfo->subBusNumber,
- BridgeInfo->maxAgents,
- BridgeInfo->maxSubBusNumber,
- BridgeInfo->logicalSlotNumber);
-
if (BridgeInfo->busUnitInfo.deviceType ==
HvCallPci_BridgeDevice) {
/* Scan_Bridge_Slot...: 0x18.00.12 */
@@ -454,9 +423,6 @@ static int scan_bridge_slot(HvBusNumber Bus,
/* iSeries_allocate_IRQ.: 0x18.00.12(0xA3) */
Irq = iSeries_allocate_IRQ(Bus, 0, EADsIdSel);
- PPCDBG(PPCDBG_BUSWALK,
- "PCI:- allocate and assign IRQ 0x%02X.%02X.%02X = 0x%02X\n",
- Bus, 0, EADsIdSel, Irq);
/*
* Connect all functions of any device found.
@@ -482,9 +448,6 @@ static int scan_bridge_slot(HvBusNumber Bus,
printk("read vendor ID: %x\n", VendorId);
/* FoundDevice: 0x18.28.10 = 0x12AE */
- PPCDBG(PPCDBG_BUSWALK,
- "PCI:- FoundDevice: 0x%02X.%02X.%02X = 0x%04X, irq %d\n",
- Bus, SubBus, AgentId, VendorId, Irq);
HvRc = HvCallPci_configStore8(Bus, SubBus, AgentId,
PCI_INTERRUPT_LINE, Irq);
if (HvRc != 0)
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index c5207064977d..d3e4bf756c83 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -71,8 +71,6 @@ extern void hvlog(char *fmt, ...);
#endif
/* Function Prototypes */
-extern void ppcdbg_initialize(void);
-
static void build_iSeries_Memory_Map(void);
static void iseries_shared_idle(void);
static void iseries_dedicated_idle(void);
@@ -309,8 +307,6 @@ static void __init iSeries_init_early(void)
ppc64_firmware_features = FW_FEATURE_ISERIES;
- ppcdbg_initialize();
-
ppc64_interrupt_controller = IC_ISERIES;
#if defined(CONFIG_BLK_DEV_INITRD)
diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c
index 3336bad67724..fcb094ec6aec 100644
--- a/arch/powerpc/platforms/iseries/smp.c
+++ b/arch/powerpc/platforms/iseries/smp.c
@@ -40,7 +40,6 @@
#include <asm/paca.h>
#include <asm/iseries/hv_call.h>
#include <asm/time.h>
-#include <asm/ppcdebug.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/system.h>
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index 4369676f1d54..c9df44fcf571 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -1,7 +1,8 @@
obj-y += pic.o setup.o time.o feature.o pci.o \
sleep.o low_i2c.o cache.o
obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o
-obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq.o
+obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o
+obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o
obj-$(CONFIG_NVRAM) += nvram.o
# ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff
obj-$(CONFIG_PPC64) += nvram.o
diff --git a/arch/powerpc/platforms/powermac/cpufreq.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index c47f8b69725c..56fd4e05fede 100644
--- a/arch/powerpc/platforms/powermac/cpufreq.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -397,18 +397,16 @@ static int pmac_cpufreq_target( struct cpufreq_policy *policy,
unsigned int relation)
{
unsigned int newstate = 0;
+ int rc;
if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs,
target_freq, relation, &newstate))
return -EINVAL;
- return do_set_cpu_speed(newstate, 1);
-}
+ rc = do_set_cpu_speed(newstate, 1);
-unsigned int pmac_get_one_cpufreq(int i)
-{
- /* Supports only one CPU for now */
- return (i == 0) ? cur_freq : 0;
+ ppc_proc_freq = cur_freq * 1000ul;
+ return rc;
}
static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
@@ -474,6 +472,8 @@ static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
do_set_cpu_speed(sleep_freq == low_freq ?
CPUFREQ_LOW : CPUFREQ_HIGH, 0);
+ ppc_proc_freq = cur_freq * 1000ul;
+
no_schedule = 0;
return 0;
}
@@ -547,7 +547,7 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
*/
if (low_freq < 98000000)
low_freq = 101000000;
-
+
/* Convert those to CPU core clocks */
low_freq = (low_freq * (*ratio)) / 2000;
hi_freq = (hi_freq * (*ratio)) / 2000;
@@ -714,6 +714,7 @@ out:
pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq;
pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
+ ppc_proc_freq = cur_freq * 1000ul;
printk(KERN_INFO "Registering PowerMac CPU frequency driver\n");
printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
new file mode 100644
index 000000000000..39150342c6f1
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -0,0 +1,323 @@
+/*
+ * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
+ * that is iMac G5 and latest single CPU desktop.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/sections.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#include <asm/smu.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) printk(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+/* see 970FX user manual */
+
+#define SCOM_PCR 0x0aa001 /* PCR scom addr */
+
+#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */
+#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */
+#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */
+#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */
+#define PCR_SPEED_MASK 0x000e0000U /* speed mask */
+#define PCR_SPEED_SHIFT 17
+#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */
+#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */
+#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */
+#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */
+#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */
+#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */
+
+#define SCOM_PSR 0x408001 /* PSR scom addr */
+/* warning: PSR is a 64 bits register */
+#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */
+#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */
+#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */
+#define PSR_CUR_SPEED_SHIFT (56)
+
+/*
+ * The G5 only supports two frequencies (Quarter speed is not supported)
+ */
+#define CPUFREQ_HIGH 0
+#define CPUFREQ_LOW 1
+
+static struct cpufreq_frequency_table g5_cpu_freqs[] = {
+ {CPUFREQ_HIGH, 0},
+ {CPUFREQ_LOW, 0},
+ {0, CPUFREQ_TABLE_END},
+};
+
+static struct freq_attr* g5_cpu_freqs_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+/* Power mode data is an array of the 32 bits PCR values to use for
+ * the various frequencies, retreived from the device-tree
+ */
+static u32 *g5_pmode_data;
+static int g5_pmode_max;
+static int g5_pmode_cur;
+
+static DECLARE_MUTEX(g5_switch_mutex);
+
+
+static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */
+static int g5_fvt_count; /* number of op. points */
+static int g5_fvt_cur; /* current op. point */
+
+/* ----------------- real hardware interface */
+
+static void g5_switch_volt(int speed_mode)
+{
+ struct smu_simple_cmd cmd;
+
+ DECLARE_COMPLETION(comp);
+ smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete,
+ &comp, 'V', 'S', 'L', 'E', 'W',
+ 0xff, g5_fvt_cur+1, speed_mode);
+ wait_for_completion(&comp);
+}
+
+static int g5_switch_freq(int speed_mode)
+{
+ struct cpufreq_freqs freqs;
+ int to;
+
+ if (g5_pmode_cur == speed_mode)
+ return 0;
+
+ down(&g5_switch_mutex);
+
+ freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency;
+ freqs.new = g5_cpu_freqs[speed_mode].frequency;
+ freqs.cpu = 0;
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ /* If frequency is going up, first ramp up the voltage */
+ if (speed_mode < g5_pmode_cur)
+ g5_switch_volt(speed_mode);
+
+ /* Clear PCR high */
+ scom970_write(SCOM_PCR, 0);
+ /* Clear PCR low */
+ scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
+ /* Set PCR low */
+ scom970_write(SCOM_PCR, PCR_HILO_SELECT |
+ g5_pmode_data[speed_mode]);
+
+ /* Wait for completion */
+ for (to = 0; to < 10; to++) {
+ unsigned long psr = scom970_read(SCOM_PSR);
+
+ if ((psr & PSR_CMD_RECEIVED) == 0 &&
+ (((psr >> PSR_CUR_SPEED_SHIFT) ^
+ (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
+ == 0)
+ break;
+ if (psr & PSR_CMD_COMPLETED)
+ break;
+ udelay(100);
+ }
+
+ /* If frequency is going down, last ramp the voltage */
+ if (speed_mode > g5_pmode_cur)
+ g5_switch_volt(speed_mode);
+
+ g5_pmode_cur = speed_mode;
+ ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ up(&g5_switch_mutex);
+
+ return 0;
+}
+
+static int g5_query_freq(void)
+{
+ unsigned long psr = scom970_read(SCOM_PSR);
+ int i;
+
+ for (i = 0; i <= g5_pmode_max; i++)
+ if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
+ (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
+ break;
+ return i;
+}
+
+/* ----------------- cpufreq bookkeeping */
+
+static int g5_cpufreq_verify(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, g5_cpu_freqs);
+}
+
+static int g5_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ unsigned int newstate = 0;
+
+ if (cpufreq_frequency_table_target(policy, g5_cpu_freqs,
+ target_freq, relation, &newstate))
+ return -EINVAL;
+
+ return g5_switch_freq(newstate);
+}
+
+static unsigned int g5_cpufreq_get_speed(unsigned int cpu)
+{
+ return g5_cpu_freqs[g5_pmode_cur].frequency;
+}
+
+static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+ if (policy->cpu != 0)
+ return -ENODEV;
+
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ policy->cur = g5_cpu_freqs[g5_query_freq()].frequency;
+ cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu);
+
+ return cpufreq_frequency_table_cpuinfo(policy,
+ g5_cpu_freqs);
+}
+
+
+static struct cpufreq_driver g5_cpufreq_driver = {
+ .name = "powermac",
+ .owner = THIS_MODULE,
+ .flags = CPUFREQ_CONST_LOOPS,
+ .init = g5_cpufreq_cpu_init,
+ .verify = g5_cpufreq_verify,
+ .target = g5_cpufreq_target,
+ .get = g5_cpufreq_get_speed,
+ .attr = g5_cpu_freqs_attr,
+};
+
+
+static int __init g5_cpufreq_init(void)
+{
+ struct device_node *cpunode;
+ unsigned int psize, ssize;
+ struct smu_sdbp_header *shdr;
+ unsigned long max_freq;
+ u32 *valp;
+ int rc = -ENODEV;
+
+ /* Look for CPU and SMU nodes */
+ cpunode = of_find_node_by_type(NULL, "cpu");
+ if (!cpunode) {
+ DBG("No CPU node !\n");
+ return -ENODEV;
+ }
+
+ /* Check 970FX for now */
+ valp = (u32 *)get_property(cpunode, "cpu-version", NULL);
+ if (!valp) {
+ DBG("No cpu-version property !\n");
+ goto bail_noprops;
+ }
+ if (((*valp) >> 16) != 0x3c) {
+ DBG("Wrong CPU version: %08x\n", *valp);
+ goto bail_noprops;
+ }
+
+ /* Look for the powertune data in the device-tree */
+ g5_pmode_data = (u32 *)get_property(cpunode, "power-mode-data",&psize);
+ if (!g5_pmode_data) {
+ DBG("No power-mode-data !\n");
+ goto bail_noprops;
+ }
+ g5_pmode_max = psize / sizeof(u32) - 1;
+
+ /* Look for the FVT table */
+ shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
+ if (!shdr)
+ goto bail_noprops;
+ g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1];
+ ssize = (shdr->len * sizeof(u32)) - sizeof(struct smu_sdbp_header);
+ g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt);
+ g5_fvt_cur = 0;
+
+ /* Sanity checking */
+ if (g5_fvt_count < 1 || g5_pmode_max < 1)
+ goto bail_noprops;
+
+ /*
+ * From what I see, clock-frequency is always the maximal frequency.
+ * The current driver can not slew sysclk yet, so we really only deal
+ * with powertune steps for now. We also only implement full freq and
+ * half freq in this version. So far, I haven't yet seen a machine
+ * supporting anything else.
+ */
+ valp = (u32 *)get_property(cpunode, "clock-frequency", NULL);
+ if (!valp)
+ return -ENODEV;
+ max_freq = (*valp)/1000;
+ g5_cpu_freqs[0].frequency = max_freq;
+ g5_cpu_freqs[1].frequency = max_freq/2;
+
+ /* Check current frequency */
+ g5_pmode_cur = g5_query_freq();
+ if (g5_pmode_cur > 1)
+ /* We don't support anything but 1:1 and 1:2, fixup ... */
+ g5_pmode_cur = 1;
+
+ /* Force apply current frequency to make sure everything is in
+ * sync (voltage is right for example). Firmware may leave us with
+ * a strange setting ...
+ */
+ g5_switch_freq(g5_pmode_cur);
+
+ printk(KERN_INFO "Registering G5 CPU frequency driver\n");
+ printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+ g5_cpu_freqs[1].frequency/1000,
+ g5_cpu_freqs[0].frequency/1000,
+ g5_cpu_freqs[g5_pmode_cur].frequency/1000);
+
+ rc = cpufreq_register_driver(&g5_cpufreq_driver);
+
+ /* We keep the CPU node on hold... hopefully, Apple G5 don't have
+ * hotplug CPU with a dynamic device-tree ...
+ */
+ return rc;
+
+ bail_noprops:
+ of_node_put(cpunode);
+
+ return rc;
+}
+
+module_init(g5_cpufreq_init);
+
+
+MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 80b58c1ec412..7acb0546671f 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -193,18 +193,6 @@ static void pmac_show_cpuinfo(struct seq_file *m)
pmac_newworld ? "NewWorld" : "OldWorld");
}
-static void pmac_show_percpuinfo(struct seq_file *m, int i)
-{
-#ifdef CONFIG_CPU_FREQ_PMAC
- extern unsigned int pmac_get_one_cpufreq(int i);
- unsigned int freq = pmac_get_one_cpufreq(i);
- if (freq != 0) {
- seq_printf(m, "clock\t\t: %dMHz\n", freq/1000);
- return;
- }
-#endif /* CONFIG_CPU_FREQ_PMAC */
-}
-
#ifndef CONFIG_ADB_CUDA
int find_via_cuda(void)
{
@@ -767,7 +755,6 @@ struct machdep_calls __initdata pmac_md = {
.setup_arch = pmac_setup_arch,
.init_early = pmac_init_early,
.show_cpuinfo = pmac_show_cpuinfo,
- .show_percpuinfo = pmac_show_percpuinfo,
.init_IRQ = pmac_pic_init,
.get_irq = mpic_get_irq, /* changed later */
.pcibios_fixup = pmac_pcibios_fixup,
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 513e27231493..fcc50bfd43fd 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -37,7 +37,6 @@
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/rtas.h>
-#include <asm/ppcdebug.h>
#include <asm/iommu.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
@@ -47,6 +46,7 @@
#include <asm/firmware.h>
#include <asm/tce.h>
#include <asm/ppc-pci.h>
+#include <asm/udbg.h>
#include "plpar_wrappers.h"
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index ab0c6dd6ec94..a50e5f3f396d 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -31,13 +31,14 @@
#include <asm/machdep.h>
#include <asm/abs_addr.h>
#include <asm/mmu_context.h>
-#include <asm/ppcdebug.h>
#include <asm/iommu.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
#include <asm/prom.h>
#include <asm/abs_addr.h>
#include <asm/cputable.h>
+#include <asm/udbg.h>
+#include <asm/smp.h>
#include "plpar_wrappers.h"
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index 382f8c5b0e7c..3bd1b3e06003 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -107,14 +107,4 @@ static inline long plpar_put_term_char(unsigned long termno, unsigned long len,
lbuf[1]);
}
-static inline long plpar_set_xdabr(unsigned long address, unsigned long flags)
-{
- return plpar_hcall_norets(H_SET_XDABR, address, flags);
-}
-
-static inline long plpar_set_dabr(unsigned long val)
-{
- return plpar_hcall_norets(H_SET_DABR, val);
-}
-
#endif /* _PSERIES_PLPAR_WRAPPERS_H */
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 6562ff4b0a82..fbd214d68b07 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -48,7 +48,7 @@
#include <asm/ptrace.h>
#include <asm/machdep.h>
#include <asm/rtas.h>
-#include <asm/ppcdebug.h>
+#include <asm/udbg.h>
static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX];
static DEFINE_SPINLOCK(ras_log_buf_lock);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 65bee939eecc..e78c39368841 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -65,6 +65,7 @@
#include <asm/ppc-pci.h>
#include <asm/i8259.h>
#include <asm/udbg.h>
+#include <asm/smp.h>
#include "plpar_wrappers.h"
@@ -353,14 +354,15 @@ static void pSeries_mach_cpu_die(void)
static int pseries_set_dabr(unsigned long dabr)
{
- if (firmware_has_feature(FW_FEATURE_XDABR)) {
- /* We want to catch accesses from kernel and userspace */
- return plpar_set_xdabr(dabr, H_DABRX_KERNEL | H_DABRX_USER);
- }
-
- return plpar_set_dabr(dabr);
+ return plpar_hcall_norets(H_SET_DABR, dabr);
}
+static int pseries_set_xdabr(unsigned long dabr)
+{
+ /* We want to catch accesses from kernel and userspace */
+ return plpar_hcall_norets(H_SET_XDABR, dabr,
+ H_DABRX_KERNEL | H_DABRX_USER);
+}
/*
* Early initialization. Relocation is on but do not reference unbolted pages
@@ -396,8 +398,10 @@ static void __init pSeries_init_early(void)
DBG("Hello World !\n");
}
- if (firmware_has_feature(FW_FEATURE_XDABR | FW_FEATURE_DABR))
+ if (firmware_has_feature(FW_FEATURE_DABR))
ppc_md.set_dabr = pseries_set_dabr;
+ else if (firmware_has_feature(FW_FEATURE_XDABR))
+ ppc_md.set_dabr = pseries_set_xdabr;
iommu_init_early_pSeries();
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index 90bce6e0c191..b7ac32fdd776 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -207,6 +207,9 @@ void __init i8259_init(unsigned long intack_addr, int offset)
spin_unlock_irqrestore(&i8259_lock, flags);
+ for (i = 0; i < NUM_ISA_INTERRUPTS; ++i)
+ irq_desc[offset + i].handler = &i8259_pic;
+
/* reserve our resources */
setup_irq(offset + 2, &i8259_irqaction);
request_resource(&ioport_resource, &pic1_iores);
@@ -216,6 +219,4 @@ void __init i8259_init(unsigned long intack_addr, int offset)
if (intack_addr != 0)
pci_intack = ioremap(intack_addr, 1);
- for (i = 0; i < NUM_ISA_INTERRUPTS; ++i)
- irq_desc[offset + i].handler = &i8259_pic;
}
diff --git a/arch/powerpc/sysdev/u3_iommu.c b/arch/powerpc/sysdev/u3_iommu.c
index 607722178c1a..543d65909812 100644
--- a/arch/powerpc/sysdev/u3_iommu.c
+++ b/arch/powerpc/sysdev/u3_iommu.c
@@ -37,7 +37,6 @@
#include <linux/vmalloc.h>
#include <asm/io.h>
#include <asm/prom.h>
-#include <asm/ppcdebug.h>
#include <asm/iommu.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
index 3056ede2424d..ae6af29938a1 100644
--- a/arch/ppc/kernel/misc.S
+++ b/arch/ppc/kernel/misc.S
@@ -25,6 +25,11 @@
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
+#ifdef CONFIG_8xx
+#define ISYNC_8xx isync
+#else
+#define ISYNC_8xx
+#endif
.text
.align 5
@@ -800,8 +805,18 @@ _GLOBAL(_insb)
subi r4,r4,1
blelr-
00: lbz r5,0(r3)
- eieio
- stbu r5,1(r4)
+01: eieio
+02: stbu r5,1(r4)
+ ISYNC_8xx
+ .section .fixup,"ax"
+03: blr
+ .text
+ .section __ex_table, "a"
+ .align 2
+ .long 00b, 03b
+ .long 01b, 03b
+ .long 02b, 03b
+ .text
bdnz 00b
blr
@@ -811,8 +826,18 @@ _GLOBAL(_outsb)
subi r4,r4,1
blelr-
00: lbzu r5,1(r4)
- stb r5,0(r3)
- eieio
+01: stb r5,0(r3)
+02: eieio
+ ISYNC_8xx
+ .section .fixup,"ax"
+03: blr
+ .text
+ .section __ex_table, "a"
+ .align 2
+ .long 00b, 03b
+ .long 01b, 03b
+ .long 02b, 03b
+ .text
bdnz 00b
blr
@@ -822,8 +847,18 @@ _GLOBAL(_insw)
subi r4,r4,2
blelr-
00: lhbrx r5,0,r3
- eieio
- sthu r5,2(r4)
+01: eieio
+02: sthu r5,2(r4)
+ ISYNC_8xx
+ .section .fixup,"ax"
+03: blr
+ .text
+ .section __ex_table, "a"
+ .align 2
+ .long 00b, 03b
+ .long 01b, 03b
+ .long 02b, 03b
+ .text
bdnz 00b
blr
@@ -833,8 +868,18 @@ _GLOBAL(_outsw)
subi r4,r4,2
blelr-
00: lhzu r5,2(r4)
- eieio
- sthbrx r5,0,r3
+01: eieio
+02: sthbrx r5,0,r3
+ ISYNC_8xx
+ .section .fixup,"ax"
+03: blr
+ .text
+ .section __ex_table, "a"
+ .align 2
+ .long 00b, 03b
+ .long 01b, 03b
+ .long 02b, 03b
+ .text
bdnz 00b
blr
@@ -844,8 +889,18 @@ _GLOBAL(_insl)
subi r4,r4,4
blelr-
00: lwbrx r5,0,r3
- eieio
- stwu r5,4(r4)
+01: eieio
+02: stwu r5,4(r4)
+ ISYNC_8xx
+ .section .fixup,"ax"
+03: blr
+ .text
+ .section __ex_table, "a"
+ .align 2
+ .long 00b, 03b
+ .long 01b, 03b
+ .long 02b, 03b
+ .text
bdnz 00b
blr
@@ -855,8 +910,18 @@ _GLOBAL(_outsl)
subi r4,r4,4
blelr-
00: lwzu r5,4(r4)
- stwbrx r5,0,r3
- eieio
+01: stwbrx r5,0,r3
+02: eieio
+ ISYNC_8xx
+ .section .fixup,"ax"
+03: blr
+ .text
+ .section __ex_table, "a"
+ .align 2
+ .long 00b, 03b
+ .long 01b, 03b
+ .long 02b, 03b
+ .text
bdnz 00b
blr
@@ -867,8 +932,18 @@ _GLOBAL(_insw_ns)
subi r4,r4,2
blelr-
00: lhz r5,0(r3)
- eieio
- sthu r5,2(r4)
+01: eieio
+02: sthu r5,2(r4)
+ ISYNC_8xx
+ .section .fixup,"ax"
+03: blr
+ .text
+ .section __ex_table, "a"
+ .align 2
+ .long 00b, 03b
+ .long 01b, 03b
+ .long 02b, 03b
+ .text
bdnz 00b
blr
@@ -879,8 +954,18 @@ _GLOBAL(_outsw_ns)
subi r4,r4,2
blelr-
00: lhzu r5,2(r4)
- sth r5,0(r3)
- eieio
+01: sth r5,0(r3)
+02: eieio
+ ISYNC_8xx
+ .section .fixup,"ax"
+03: blr
+ .text
+ .section __ex_table, "a"
+ .align 2
+ .long 00b, 03b
+ .long 01b, 03b
+ .long 02b, 03b
+ .text
bdnz 00b
blr
@@ -891,8 +976,18 @@ _GLOBAL(_insl_ns)
subi r4,r4,4
blelr-
00: lwz r5,0(r3)
- eieio
- stwu r5,4(r4)
+01: eieio
+02: stwu r5,4(r4)
+ ISYNC_8xx
+ .section .fixup,"ax"
+03: blr
+ .text
+ .section __ex_table, "a"
+ .align 2
+ .long 00b, 03b
+ .long 01b, 03b
+ .long 02b, 03b
+ .text
bdnz 00b
blr
@@ -903,8 +998,18 @@ _GLOBAL(_outsl_ns)
subi r4,r4,4
blelr-
00: lwzu r5,4(r4)
- stw r5,0(r3)
- eieio
+01: stw r5,0(r3)
+02: eieio
+ ISYNC_8xx
+ .section .fixup,"ax"
+03: blr
+ .text
+ .section __ex_table, "a"
+ .align 2
+ .long 00b, 03b
+ .long 01b, 03b
+ .long 02b, 03b
+ .text
bdnz 00b
blr
diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c
index 16adde6b429d..9dbc4d28fa28 100644
--- a/arch/ppc/kernel/traps.c
+++ b/arch/ppc/kernel/traps.c
@@ -49,7 +49,7 @@ extern int xmon_sstep(struct pt_regs *regs);
extern int xmon_iabr_match(struct pt_regs *regs);
extern int xmon_dabr_match(struct pt_regs *regs);
-void (*debugger)(struct pt_regs *regs) = xmon;
+int (*debugger)(struct pt_regs *regs) = xmon;
int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt;
int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep;
int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match;
@@ -57,7 +57,7 @@ int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match;
void (*debugger_fault_handler)(struct pt_regs *regs);
#else
#ifdef CONFIG_KGDB
-void (*debugger)(struct pt_regs *regs);
+int (*debugger)(struct pt_regs *regs);
int (*debugger_bpt)(struct pt_regs *regs);
int (*debugger_sstep)(struct pt_regs *regs);
int (*debugger_iabr_match)(struct pt_regs *regs);
@@ -159,7 +159,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
*/
static inline int check_io_access(struct pt_regs *regs)
{
-#ifdef CONFIG_PPC_PMAC
+#if defined CONFIG_PPC_PMAC || defined CONFIG_8xx
unsigned long msr = regs->msr;
const struct exception_table_entry *entry;
unsigned int *nip = (unsigned int *)regs->nip;
@@ -178,7 +178,11 @@ static inline int check_io_access(struct pt_regs *regs)
nip -= 2;
else if (*nip == 0x4c00012c) /* isync */
--nip;
- if (*nip == 0x7c0004ac || (*nip >> 26) == 3) {
+ /* eieio from I/O string functions */
+ else if ((*nip) == 0x7c0006ac || *(nip+1) == 0x7c0006ac)
+ nip += 2;
+ if (*nip == 0x7c0004ac || (*nip >> 26) == 3 ||
+ (*(nip+1) >> 26) == 3) {
/* sync or twi */
unsigned int rb;
diff --git a/arch/ppc/syslib/m8xx_wdt.c b/arch/ppc/syslib/m8xx_wdt.c
index c5ac5ce5d7d2..a21632d37e5a 100644
--- a/arch/ppc/syslib/m8xx_wdt.c
+++ b/arch/ppc/syslib/m8xx_wdt.c
@@ -14,6 +14,7 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <asm/io.h>
#include <asm/8xx_immap.h>
#include <syslib/m8xx_wdt.h>
@@ -29,8 +30,8 @@ void m8xx_wdt_reset(void)
{
volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
- out_be16(imap->im_siu_conf.sc_swsr, 0x556c); /* write magic1 */
- out_be16(imap->im_siu_conf.sc_swsr, 0xaa39); /* write magic2 */
+ out_be16(&imap->im_siu_conf.sc_swsr, 0x556c); /* write magic1 */
+ out_be16(&imap->im_siu_conf.sc_swsr, 0xaa39); /* write magic2 */
}
static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs)
@@ -39,7 +40,7 @@ static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs)
m8xx_wdt_reset();
- out_be16(imap->im_sit.sit_piscr, in_be16(imap->im_sit.sit_piscr | PISCR_PS)); /* clear irq */
+ out_be16(&imap->im_sit.sit_piscr, in_be16(&imap->im_sit.sit_piscr) | PISCR_PS); /* clear irq */
return IRQ_HANDLED;
}
@@ -51,7 +52,7 @@ void __init m8xx_wdt_handler_install(bd_t * binfo)
u32 sypcr;
u32 pitrtclk;
- sypcr = in_be32(imap->im_siu_conf.sc_sypcr);
+ sypcr = in_be32(&imap->im_siu_conf.sc_sypcr);
if (!(sypcr & 0x04)) {
printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n",
@@ -87,9 +88,9 @@ void __init m8xx_wdt_handler_install(bd_t * binfo)
else
pitc = pitrtclk * wdt_timeout / binfo->bi_intfreq / 2;
- out_be32(imap->im_sit.sit_pitc, pitc << 16);
+ out_be32(&imap->im_sit.sit_pitc, pitc << 16);
- out_be16(imap->im_sit.sit_piscr, (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE);
+ out_be16(&imap->im_sit.sit_piscr, (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE);
if (setup_irq(PIT_INTERRUPT, &m8xx_wdt_irqaction))
panic("m8xx_wdt: error setting up the watchdog irq!");
diff --git a/arch/ppc/syslib/prom.c b/arch/ppc/syslib/prom.c
index 1b9aa0d6a924..03b1fc9b9501 100644
--- a/arch/ppc/syslib/prom.c
+++ b/arch/ppc/syslib/prom.c
@@ -1165,7 +1165,7 @@ get_property(struct device_node *np, const char *name, int *lenp)
/*
* Add a property to a node
*/
-void
+int
prom_add_property(struct device_node* np, struct property* prop)
{
struct property **next = &np->properties;
@@ -1174,6 +1174,8 @@ prom_add_property(struct device_node* np, struct property* prop)
while (*next)
next = &(*next)->next;
*next = prop;
+
+ return 0;
}
/* I quickly hacked that one, check against spec ! */
diff --git a/arch/ppc/xmon/xmon.c b/arch/ppc/xmon/xmon.c
index 66bfaa3211a2..2b483b4f1602 100644
--- a/arch/ppc/xmon/xmon.c
+++ b/arch/ppc/xmon/xmon.c
@@ -220,8 +220,7 @@ static void get_tb(unsigned *p)
p[1] = lo;
}
-void
-xmon(struct pt_regs *excp)
+int xmon(struct pt_regs *excp)
{
struct pt_regs regs;
int msr, cmd;
@@ -290,6 +289,8 @@ xmon(struct pt_regs *excp)
#endif /* CONFIG_SMP */
set_msr(msr); /* restore interrupt enable */
get_tb(start_tb[smp_processor_id()]);
+
+ return cmd != 'X';
}
irqreturn_t
diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig
index 2130cc315957..29552348e581 100644
--- a/arch/ppc64/Kconfig
+++ b/arch/ppc64/Kconfig
@@ -56,6 +56,7 @@ config PPC_STD_MMU
# max order + 1
config FORCE_MAX_ZONEORDER
int
+ default "9" if PPC_64K_PAGES
default "13"
source "init/Kconfig"
@@ -173,6 +174,16 @@ config KEXEC
support. As of this writing the exact hardware interface is
strongly in flux, so no good recommendation can be made.
+source "drivers/cpufreq/Kconfig"
+
+config CPU_FREQ_PMAC64
+ bool "Support for some Apple G5s"
+ depends on CPU_FREQ && PMAC_SMU && PPC64
+ select CPU_FREQ_TABLE
+ help
+ This adds support for frequency switching on Apple iMac G5,
+ and some of the more recent desktop G5 machines as well.
+
config IBMVIO
depends on PPC_PSERIES || PPC_ISERIES
bool
diff --git a/arch/ppc64/Kconfig.debug b/arch/ppc64/Kconfig.debug
index f16a5030527b..b258c9314a1b 100644
--- a/arch/ppc64/Kconfig.debug
+++ b/arch/ppc64/Kconfig.debug
@@ -55,10 +55,6 @@ config XMON_DEFAULT
xmon is normally disabled unless booted with 'xmon=on'.
Use 'xmon=off' to disable xmon init during runtime.
-config PPCDBG
- bool "Include PPCDBG realtime debugging"
- depends on DEBUG_KERNEL
-
config IRQSTACKS
bool "Use separate kernel stacks when processing interrupts"
help
diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c
index 8abd2ad92832..8fec27469802 100644
--- a/arch/ppc64/kernel/idle.c
+++ b/arch/ppc64/kernel/idle.c
@@ -28,6 +28,7 @@
#include <asm/time.h>
#include <asm/systemcfg.h>
#include <asm/machdep.h>
+#include <asm/smp.h>
extern void power4_idle(void);
diff --git a/arch/ppc64/kernel/machine_kexec.c b/arch/ppc64/kernel/machine_kexec.c
index ff8679f260f3..07ea03598c00 100644
--- a/arch/ppc64/kernel/machine_kexec.c
+++ b/arch/ppc64/kernel/machine_kexec.c
@@ -24,6 +24,7 @@
#include <asm/mmu.h>
#include <asm/sections.h> /* _end */
#include <asm/prom.h>
+#include <asm/smp.h>
#define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */
diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S
index 077507ffbab8..914632ec587d 100644
--- a/arch/ppc64/kernel/misc.S
+++ b/arch/ppc64/kernel/misc.S
@@ -560,7 +560,7 @@ _GLOBAL(real_readb)
isync
blr
- /*
+/*
* Do an IO access in real mode
*/
_GLOBAL(real_writeb)
@@ -593,6 +593,76 @@ _GLOBAL(real_writeb)
#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */
/*
+ * SCOM access functions for 970 (FX only for now)
+ *
+ * unsigned long scom970_read(unsigned int address);
+ * void scom970_write(unsigned int address, unsigned long value);
+ *
+ * The address passed in is the 24 bits register address. This code
+ * is 970 specific and will not check the status bits, so you should
+ * know what you are doing.
+ */
+_GLOBAL(scom970_read)
+ /* interrupts off */
+ mfmsr r4
+ ori r0,r4,MSR_EE
+ xori r0,r0,MSR_EE
+ mtmsrd r0,1
+
+ /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
+ * (including parity). On current CPUs they must be 0'd,
+ * and finally or in RW bit
+ */
+ rlwinm r3,r3,8,0,15
+ ori r3,r3,0x8000
+
+ /* do the actual scom read */
+ sync
+ mtspr SPRN_SCOMC,r3
+ isync
+ mfspr r3,SPRN_SCOMD
+ isync
+ mfspr r0,SPRN_SCOMC
+ isync
+
+ /* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah
+ * that's the best we can do). Not implemented yet as we don't use
+ * the scom on any of the bogus CPUs yet, but may have to be done
+ * ultimately
+ */
+
+ /* restore interrupts */
+ mtmsrd r4,1
+ blr
+
+
+_GLOBAL(scom970_write)
+ /* interrupts off */
+ mfmsr r5
+ ori r0,r5,MSR_EE
+ xori r0,r0,MSR_EE
+ mtmsrd r0,1
+
+ /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
+ * (including parity). On current CPUs they must be 0'd.
+ */
+
+ rlwinm r3,r3,8,0,15
+
+ sync
+ mtspr SPRN_SCOMD,r4 /* write data */
+ isync
+ mtspr SPRN_SCOMC,r3 /* write command */
+ isync
+ mfspr 3,SPRN_SCOMC
+ isync
+
+ /* restore interrupts */
+ mtmsrd r5,1
+ blr
+
+
+/*
* Create a kernel thread
* kernel_thread(fn, arg, flags)
*/
diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c
index 3d2106b022a1..30247ff74972 100644
--- a/arch/ppc64/kernel/pci.c
+++ b/arch/ppc64/kernel/pci.c
@@ -295,8 +295,8 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
}
}
-static struct pci_dev *of_create_pci_dev(struct device_node *node,
- struct pci_bus *bus, int devfn)
+struct pci_dev *of_create_pci_dev(struct device_node *node,
+ struct pci_bus *bus, int devfn)
{
struct pci_dev *dev;
const char *type;
@@ -354,10 +354,9 @@ static struct pci_dev *of_create_pci_dev(struct device_node *node,
return dev;
}
+EXPORT_SYMBOL(of_create_pci_dev);
-static void of_scan_pci_bridge(struct device_node *node, struct pci_dev *dev);
-
-static void __devinit of_scan_bus(struct device_node *node,
+void __devinit of_scan_bus(struct device_node *node,
struct pci_bus *bus)
{
struct device_node *child = NULL;
@@ -381,9 +380,10 @@ static void __devinit of_scan_bus(struct device_node *node,
do_bus_setup(bus);
}
+EXPORT_SYMBOL(of_scan_bus);
-static void __devinit of_scan_pci_bridge(struct device_node *node,
- struct pci_dev *dev)
+void __devinit of_scan_pci_bridge(struct device_node *node,
+ struct pci_dev *dev)
{
struct pci_bus *bus;
u32 *busrange, *ranges;
@@ -464,9 +464,10 @@ static void __devinit of_scan_pci_bridge(struct device_node *node,
else if (mode == PCI_PROBE_NORMAL)
pci_scan_child_bus(bus);
}
+EXPORT_SYMBOL(of_scan_pci_bridge);
#endif /* CONFIG_PPC_MULTIPLATFORM */
-static void __devinit scan_phb(struct pci_controller *hose)
+void __devinit scan_phb(struct pci_controller *hose)
{
struct pci_bus *bus;
struct device_node *node = hose->arch_data;
diff --git a/arch/ppc64/kernel/prom.c b/arch/ppc64/kernel/prom.c
index dece31e58bc4..3402fbee62c7 100644
--- a/arch/ppc64/kernel/prom.c
+++ b/arch/ppc64/kernel/prom.c
@@ -31,6 +31,7 @@
#include <linux/initrd.h>
#include <linux/bitops.h>
#include <linux/module.h>
+#include <linux/module.h>
#include <asm/prom.h>
#include <asm/rtas.h>
@@ -46,7 +47,6 @@
#include <asm/pgtable.h>
#include <asm/pci.h>
#include <asm/iommu.h>
-#include <asm/ppcdebug.h>
#include <asm/btext.h>
#include <asm/sections.h>
#include <asm/machdep.h>
@@ -1866,17 +1866,32 @@ get_property(struct device_node *np, const char *name, int *lenp)
EXPORT_SYMBOL(get_property);
/*
- * Add a property to a node
+ * Add a property to a node.
*/
-void
+int
prom_add_property(struct device_node* np, struct property* prop)
{
- struct property **next = &np->properties;
+ struct property **next;
prop->next = NULL;
- while (*next)
+ write_lock(&devtree_lock);
+ next = &np->properties;
+ while (*next) {
+ if (strcmp(prop->name, (*next)->name) == 0) {
+ /* duplicate ! don't insert it */
+ write_unlock(&devtree_lock);
+ return -1;
+ }
next = &(*next)->next;
+ }
*next = prop;
+ write_unlock(&devtree_lock);
+
+ /* try to add to proc as well if it was initialized */
+ if (np->pde)
+ proc_device_tree_add_prop(np->pde, prop);
+
+ return 0;
}
#if 0
diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c
index a4bbca6dbb8b..e4c880dab997 100644
--- a/arch/ppc64/kernel/prom_init.c
+++ b/arch/ppc64/kernel/prom_init.c
@@ -44,7 +44,6 @@
#include <asm/pgtable.h>
#include <asm/pci.h>
#include <asm/iommu.h>
-#include <asm/ppcdebug.h>
#include <asm/btext.h>
#include <asm/sections.h>
#include <asm/machdep.h>
@@ -1825,7 +1824,7 @@ static void __init fixup_device_tree(void)
if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev))
== PROM_ERROR)
return;
- if (u3_rev != 0x35 && u3_rev != 0x37)
+ if (u3_rev < 0x35 || u3_rev > 0x39)
return;
/* does it need fixup ? */
if (prom_getproplen(i2c, "interrupts") > 0)
diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/ppc64/kernel/rtas_pci.c
index 3ad15c90fbbd..3c3f19192fcc 100644
--- a/arch/ppc64/kernel/rtas_pci.c
+++ b/arch/ppc64/kernel/rtas_pci.c
@@ -440,7 +440,6 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn)
struct device_node *root = of_find_node_by_path("/");
unsigned int root_size_cells = 0;
struct pci_controller *phb;
- struct pci_bus *bus;
int primary;
root_size_cells = prom_n_size_cells(root);
@@ -456,10 +455,7 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn)
of_node_put(root);
pci_devs_phb_init_dynamic(phb);
- phb->last_busno = 0xff;
- bus = pci_scan_bus(phb->first_busno, phb->ops, phb->arch_data);
- phb->bus = bus;
- phb->last_busno = bus->subordinate;
+ scan_phb(phb);
return phb;
}
diff --git a/arch/ppc64/kernel/udbg.c b/arch/ppc64/kernel/udbg.c
index d49c3613c8ec..0d878e72fc44 100644
--- a/arch/ppc64/kernel/udbg.c
+++ b/arch/ppc64/kernel/udbg.c
@@ -10,12 +10,10 @@
*/
#include <stdarg.h>
-#define WANT_PPCDBG_TAB /* Only defined here */
#include <linux/config.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/console.h>
-#include <asm/ppcdebug.h>
#include <asm/processor.h>
void (*udbg_putc)(unsigned char c);
@@ -89,59 +87,6 @@ void udbg_printf(const char *fmt, ...)
va_end(args);
}
-/* PPCDBG stuff */
-
-u64 ppc64_debug_switch;
-
-/* Special print used by PPCDBG() macro */
-void udbg_ppcdbg(unsigned long debug_flags, const char *fmt, ...)
-{
- unsigned long active_debugs = debug_flags & ppc64_debug_switch;
-
- if (active_debugs) {
- va_list ap;
- unsigned char buf[UDBG_BUFSIZE];
- unsigned long i, len = 0;
-
- for (i=0; i < PPCDBG_NUM_FLAGS; i++) {
- if (((1U << i) & active_debugs) &&
- trace_names[i]) {
- len += strlen(trace_names[i]);
- udbg_puts(trace_names[i]);
- break;
- }
- }
-
- snprintf(buf, UDBG_BUFSIZE, " [%s]: ", current->comm);
- len += strlen(buf);
- udbg_puts(buf);
-
- while (len < 18) {
- udbg_puts(" ");
- len++;
- }
-
- va_start(ap, fmt);
- vsnprintf(buf, UDBG_BUFSIZE, fmt, ap);
- udbg_puts(buf);
- va_end(ap);
- }
-}
-
-unsigned long udbg_ifdebug(unsigned long flags)
-{
- return (flags & ppc64_debug_switch);
-}
-
-/*
- * Initialize the PPCDBG state. Called before relocation has been enabled.
- */
-void __init ppcdbg_initialize(void)
-{
- ppc64_debug_switch = PPC_DEBUG_DEFAULT; /* | PPCDBG_BUSWALK | */
- /* PPCDBG_PHBINIT | PPCDBG_MM | PPCDBG_MMINIT | PPCDBG_TCEINIT | PPCDBG_TCE */;
-}
-
/*
* Early boot console based on udbg
*/
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index e425ad3eebba..af7cb2bfd670 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -28,6 +28,7 @@
#include <linux/devfs_fs_kernel.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/spinlock.h>
#include <asm/io.h>
#include <asm/dbdma.h>
#include <asm/prom.h>
@@ -176,6 +177,7 @@ struct swim3 {
struct floppy_state {
enum swim_state state;
+ spinlock_t lock;
struct swim3 __iomem *swim3; /* hardware registers */
struct dbdma_regs __iomem *dma; /* DMA controller registers */
int swim3_intr; /* interrupt number for SWIM3 */
@@ -304,7 +306,6 @@ static void do_fd_request(request_queue_t * q)
#endif /* CONFIG_PMAC_MEDIABAY */
start_request(&floppy_states[i]);
}
- sti();
}
static void start_request(struct floppy_state *fs)
@@ -370,7 +371,7 @@ static void set_timeout(struct floppy_state *fs, int nticks,
{
unsigned long flags;
- save_flags(flags); cli();
+ spin_lock_irqsave(&fs->lock, flags);
if (fs->timeout_pending)
del_timer(&fs->timeout);
fs->timeout.expires = jiffies + nticks;
@@ -378,7 +379,7 @@ static void set_timeout(struct floppy_state *fs, int nticks,
fs->timeout.data = (unsigned long) fs;
add_timer(&fs->timeout);
fs->timeout_pending = 1;
- restore_flags(flags);
+ spin_unlock_irqrestore(&fs->lock, flags);
}
static inline void scan_track(struct floppy_state *fs)
@@ -790,14 +791,13 @@ static int grab_drive(struct floppy_state *fs, enum swim_state state,
{
unsigned long flags;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&fs->lock, flags);
if (fs->state != idle) {
++fs->wanted;
while (fs->state != available) {
if (interruptible && signal_pending(current)) {
--fs->wanted;
- restore_flags(flags);
+ spin_unlock_irqrestore(&fs->lock, flags);
return -EINTR;
}
interruptible_sleep_on(&fs->wait);
@@ -805,7 +805,7 @@ static int grab_drive(struct floppy_state *fs, enum swim_state state,
--fs->wanted;
}
fs->state = state;
- restore_flags(flags);
+ spin_unlock_irqrestore(&fs->lock, flags);
return 0;
}
@@ -813,11 +813,10 @@ static void release_drive(struct floppy_state *fs)
{
unsigned long flags;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&fs->lock, flags);
fs->state = idle;
start_request(fs);
- restore_flags(flags);
+ spin_unlock_irqrestore(&fs->lock, flags);
}
static int fd_eject(struct floppy_state *fs)
@@ -1109,6 +1108,7 @@ static int swim3_add_device(struct device_node *swim)
pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1);
memset(fs, 0, sizeof(*fs));
+ spin_lock_init(&fs->lock);
fs->state = idle;
fs->swim3 = (struct swim3 __iomem *)
ioremap(swim->addrs[0].address, 0x200);
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index d8c3d8ebad30..b3e65a65d202 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -497,16 +497,19 @@ pmu_hd_blink_init(void)
if (pmu_get_model() != PMU_KEYLARGO_BASED)
return 0;
- dt = find_devices("device-tree");
+ dt = of_find_node_by_path("/");
if (dt == NULL)
return 0;
model = (const char *)get_property(dt, "model", NULL);
if (model == NULL)
return 0;
if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 &&
- strncmp(model, "iBook", strlen("iBook")) != 0)
+ strncmp(model, "iBook", strlen("iBook")) != 0) {
+ of_node_put(dt);
return 0;
-
+ }
+ of_node_put(dt);
+
pmu_blink_on.complete = 1;
pmu_blink_off.complete = 1;
spin_lock_init(&pmu_blink_lock);
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index bc3e096d84f7..a0ea44c3e8b1 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -169,6 +169,25 @@ config THERM_PM72
This driver provides thermostat and fan control for the desktop
G5 machines.
+config WINDFARM
+ tristate "New PowerMac thermal control infrastructure"
+
+config WINDFARM_PM81
+ tristate "Support for thermal management on iMac G5"
+ depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
+ select I2C_PMAC_SMU
+ help
+ This driver provides thermal control for the iMacG5
+
+config WINDFARM_PM91
+ tristate "Support for thermal management on PowerMac9,1"
+ depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
+ select I2C_PMAC_SMU
+ help
+ This driver provides thermal control for the PowerMac9,1
+ which is the recent (SMU based) single CPU desktop G5
+
+
config ANSLCD
tristate "Support for ANS LCD display"
depends on ADB_CUDA && PPC_PMAC
diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile
index 236291bd48a4..f4657aa81fb0 100644
--- a/drivers/macintosh/Makefile
+++ b/drivers/macintosh/Makefile
@@ -26,3 +26,12 @@ obj-$(CONFIG_ADB_MACIO) += macio-adb.o
obj-$(CONFIG_THERM_PM72) += therm_pm72.o
obj-$(CONFIG_THERM_WINDTUNNEL) += therm_windtunnel.o
obj-$(CONFIG_THERM_ADT746X) += therm_adt746x.o
+obj-$(CONFIG_WINDFARM) += windfarm_core.o
+obj-$(CONFIG_WINDFARM_PM81) += windfarm_smu_controls.o \
+ windfarm_smu_sensors.o \
+ windfarm_lm75_sensor.o windfarm_pid.o \
+ windfarm_cpufreq_clamp.o windfarm_pm81.o
+obj-$(CONFIG_WINDFARM_PM91) += windfarm_smu_controls.o \
+ windfarm_smu_sensors.o \
+ windfarm_lm75_sensor.o windfarm_pid.o \
+ windfarm_cpufreq_clamp.o windfarm_pm91.o
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index 34f3c7e2d832..e8378274d710 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -47,13 +47,13 @@
#include <asm/uaccess.h>
#include <asm/of_device.h>
-#define VERSION "0.6"
+#define VERSION "0.7"
#define AUTHOR "(c) 2005 Benjamin Herrenschmidt, IBM Corp."
#undef DEBUG_SMU
#ifdef DEBUG_SMU
-#define DPRINTK(fmt, args...) do { printk(KERN_DEBUG fmt , ##args); } while (0)
+#define DPRINTK(fmt, args...) do { udbg_printf(KERN_DEBUG fmt , ##args); } while (0)
#else
#define DPRINTK(fmt, args...) do { } while (0)
#endif
@@ -92,7 +92,7 @@ struct smu_device {
* for now, just hard code that
*/
static struct smu_device *smu;
-
+static DECLARE_MUTEX(smu_part_access);
/*
* SMU driver low level stuff
@@ -113,9 +113,11 @@ static void smu_start_cmd(void)
DPRINTK("SMU: starting cmd %x, %d bytes data\n", cmd->cmd,
cmd->data_len);
- DPRINTK("SMU: data buffer: %02x %02x %02x %02x ...\n",
+ DPRINTK("SMU: data buffer: %02x %02x %02x %02x %02x %02x %02x %02x\n",
((u8 *)cmd->data_buf)[0], ((u8 *)cmd->data_buf)[1],
- ((u8 *)cmd->data_buf)[2], ((u8 *)cmd->data_buf)[3]);
+ ((u8 *)cmd->data_buf)[2], ((u8 *)cmd->data_buf)[3],
+ ((u8 *)cmd->data_buf)[4], ((u8 *)cmd->data_buf)[5],
+ ((u8 *)cmd->data_buf)[6], ((u8 *)cmd->data_buf)[7]);
/* Fill the SMU command buffer */
smu->cmd_buf->cmd = cmd->cmd;
@@ -440,7 +442,7 @@ int smu_present(void)
EXPORT_SYMBOL(smu_present);
-int smu_init (void)
+int __init smu_init (void)
{
struct device_node *np;
u32 *data;
@@ -588,6 +590,8 @@ static void smu_expose_childs(void *unused)
sprintf(name, "smu-i2c-%02x", *reg);
of_platform_device_create(np, name, &smu->of_dev->dev);
}
+ if (device_is_compatible(np, "smu-sensors"))
+ of_platform_device_create(np, "smu-sensors", &smu->of_dev->dev);
}
}
@@ -845,6 +849,156 @@ int smu_queue_i2c(struct smu_i2c_cmd *cmd)
return 0;
}
+/*
+ * Handling of "partitions"
+ */
+
+static int smu_read_datablock(u8 *dest, unsigned int addr, unsigned int len)
+{
+ DECLARE_COMPLETION(comp);
+ unsigned int chunk;
+ struct smu_cmd cmd;
+ int rc;
+ u8 params[8];
+
+ /* We currently use a chunk size of 0xe. We could check the
+ * SMU firmware version and use bigger sizes though
+ */
+ chunk = 0xe;
+
+ while (len) {
+ unsigned int clen = min(len, chunk);
+
+ cmd.cmd = SMU_CMD_MISC_ee_COMMAND;
+ cmd.data_len = 7;
+ cmd.data_buf = params;
+ cmd.reply_len = chunk;
+ cmd.reply_buf = dest;
+ cmd.done = smu_done_complete;
+ cmd.misc = &comp;
+ params[0] = SMU_CMD_MISC_ee_GET_DATABLOCK_REC;
+ params[1] = 0x4;
+ *((u32 *)&params[2]) = addr;
+ params[6] = clen;
+
+ rc = smu_queue_cmd(&cmd);
+ if (rc)
+ return rc;
+ wait_for_completion(&comp);
+ if (cmd.status != 0)
+ return rc;
+ if (cmd.reply_len != clen) {
+ printk(KERN_DEBUG "SMU: short read in "
+ "smu_read_datablock, got: %d, want: %d\n",
+ cmd.reply_len, clen);
+ return -EIO;
+ }
+ len -= clen;
+ addr += clen;
+ dest += clen;
+ }
+ return 0;
+}
+
+static struct smu_sdbp_header *smu_create_sdb_partition(int id)
+{
+ DECLARE_COMPLETION(comp);
+ struct smu_simple_cmd cmd;
+ unsigned int addr, len, tlen;
+ struct smu_sdbp_header *hdr;
+ struct property *prop;
+
+ /* First query the partition info */
+ smu_queue_simple(&cmd, SMU_CMD_PARTITION_COMMAND, 2,
+ smu_done_complete, &comp,
+ SMU_CMD_PARTITION_LATEST, id);
+ wait_for_completion(&comp);
+
+ /* Partition doesn't exist (or other error) */
+ if (cmd.cmd.status != 0 || cmd.cmd.reply_len != 6)
+ return NULL;
+
+ /* Fetch address and length from reply */
+ addr = *((u16 *)cmd.buffer);
+ len = cmd.buffer[3] << 2;
+ /* Calucluate total length to allocate, including the 17 bytes
+ * for "sdb-partition-XX" that we append at the end of the buffer
+ */
+ tlen = sizeof(struct property) + len + 18;
+
+ prop = kcalloc(tlen, 1, GFP_KERNEL);
+ if (prop == NULL)
+ return NULL;
+ hdr = (struct smu_sdbp_header *)(prop + 1);
+ prop->name = ((char *)prop) + tlen - 18;
+ sprintf(prop->name, "sdb-partition-%02x", id);
+ prop->length = len;
+ prop->value = (unsigned char *)hdr;
+ prop->next = NULL;
+
+ /* Read the datablock */
+ if (smu_read_datablock((u8 *)hdr, addr, len)) {
+ printk(KERN_DEBUG "SMU: datablock read failed while reading "
+ "partition %02x !\n", id);
+ goto failure;
+ }
+
+ /* Got it, check a few things and create the property */
+ if (hdr->id != id) {
+ printk(KERN_DEBUG "SMU: Reading partition %02x and got "
+ "%02x !\n", id, hdr->id);
+ goto failure;
+ }
+ if (prom_add_property(smu->of_node, prop)) {
+ printk(KERN_DEBUG "SMU: Failed creating sdb-partition-%02x "
+ "property !\n", id);
+ goto failure;
+ }
+
+ return hdr;
+ failure:
+ kfree(prop);
+ return NULL;
+}
+
+/* Note: Only allowed to return error code in pointers (using ERR_PTR)
+ * when interruptible is 1
+ */
+struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size,
+ int interruptible)
+{
+ char pname[32];
+ struct smu_sdbp_header *part;
+
+ if (!smu)
+ return NULL;
+
+ sprintf(pname, "sdb-partition-%02x", id);
+
+ if (interruptible) {
+ int rc;
+ rc = down_interruptible(&smu_part_access);
+ if (rc)
+ return ERR_PTR(rc);
+ } else
+ down(&smu_part_access);
+
+ part = (struct smu_sdbp_header *)get_property(smu->of_node,
+ pname, size);
+ if (part == NULL) {
+ part = smu_create_sdb_partition(id);
+ if (part != NULL && size)
+ *size = part->len << 2;
+ }
+ up(&smu_part_access);
+ return part;
+}
+
+struct smu_sdbp_header *smu_get_sdb_partition(int id, unsigned int *size)
+{
+ return __smu_get_sdb_partition(id, size, 0);
+}
+EXPORT_SYMBOL(smu_get_sdb_partition);
/*
@@ -918,6 +1072,14 @@ static ssize_t smu_write(struct file *file, const char __user *buf,
else if (hdr.cmdtype == SMU_CMDTYPE_WANTS_EVENTS) {
pp->mode = smu_file_events;
return 0;
+ } else if (hdr.cmdtype == SMU_CMDTYPE_GET_PARTITION) {
+ struct smu_sdbp_header *part;
+ part = __smu_get_sdb_partition(hdr.cmd, NULL, 1);
+ if (part == NULL)
+ return -EINVAL;
+ else if (IS_ERR(part))
+ return PTR_ERR(part);
+ return 0;
} else if (hdr.cmdtype != SMU_CMDTYPE_SMU)
return -EINVAL;
else if (pp->mode != smu_file_commands)
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 9bc6cc6e3845..564043508569 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -2053,6 +2053,7 @@ pmu_register_sleep_notifier(struct pmu_sleep_notifier *n)
__list_add(&n->list, list->prev, list);
return 0;
}
+EXPORT_SYMBOL(pmu_register_sleep_notifier);
int
pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* n)
@@ -2063,6 +2064,7 @@ pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* n)
n->list.next = NULL;
return 0;
}
+EXPORT_SYMBOL(pmu_unregister_sleep_notifier);
#endif /* CONFIG_PM */
#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
@@ -2667,10 +2669,10 @@ powerbook_sleep_3400(void)
asleep = 1;
/* Put the CPU into sleep mode */
- asm volatile("mfspr %0,1008" : "=r" (hid0) :);
+ hid0 = mfspr(SPRN_HID0);
hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP;
- asm volatile("mtspr 1008,%0" : : "r" (hid0));
- _nmask_and_or_msr(0, MSR_POW | MSR_EE);
+ mtspr(SPRN_HID0, hid0);
+ mtmsr(mfmsr() | MSR_POW | MSR_EE);
udelay(10);
/* OK, we're awake again, start restoring things */
@@ -3139,8 +3141,6 @@ EXPORT_SYMBOL(pmu_i2c_stdsub_write);
EXPORT_SYMBOL(pmu_i2c_simple_read);
EXPORT_SYMBOL(pmu_i2c_simple_write);
#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
-EXPORT_SYMBOL(pmu_register_sleep_notifier);
-EXPORT_SYMBOL(pmu_unregister_sleep_notifier);
EXPORT_SYMBOL(pmu_enable_irled);
EXPORT_SYMBOL(pmu_battery_count);
EXPORT_SYMBOL(pmu_batteries);
diff --git a/drivers/macintosh/windfarm.h b/drivers/macintosh/windfarm.h
new file mode 100644
index 000000000000..3f0cb0312ea3
--- /dev/null
+++ b/drivers/macintosh/windfarm.h
@@ -0,0 +1,131 @@
+/*
+ * Windfarm PowerMac thermal control.
+ *
+ * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Released under the term of the GNU GPL v2.
+ */
+
+#ifndef __WINDFARM_H__
+#define __WINDFARM_H__
+
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+
+/* Display a 16.16 fixed point value */
+#define FIX32TOPRINT(f) ((f) >> 16),((((f) & 0xffff) * 1000) >> 16)
+
+/*
+ * Control objects
+ */
+
+struct wf_control;
+
+struct wf_control_ops {
+ int (*set_value)(struct wf_control *ct, s32 val);
+ int (*get_value)(struct wf_control *ct, s32 *val);
+ s32 (*get_min)(struct wf_control *ct);
+ s32 (*get_max)(struct wf_control *ct);
+ void (*release)(struct wf_control *ct);
+ struct module *owner;
+};
+
+struct wf_control {
+ struct list_head link;
+ struct wf_control_ops *ops;
+ char *name;
+ int type;
+ struct kref ref;
+};
+
+#define WF_CONTROL_TYPE_GENERIC 0
+#define WF_CONTROL_RPM_FAN 1
+#define WF_CONTROL_PWM_FAN 2
+
+
+/* Note about lifetime rules: wf_register_control() will initialize
+ * the kref and wf_unregister_control will decrement it, thus the
+ * object creating/disposing a given control shouldn't assume it
+ * still exists after wf_unregister_control has been called.
+ * wf_find_control will inc the refcount for you
+ */
+extern int wf_register_control(struct wf_control *ct);
+extern void wf_unregister_control(struct wf_control *ct);
+extern struct wf_control * wf_find_control(const char *name);
+extern int wf_get_control(struct wf_control *ct);
+extern void wf_put_control(struct wf_control *ct);
+
+static inline int wf_control_set_max(struct wf_control *ct)
+{
+ s32 vmax = ct->ops->get_max(ct);
+ return ct->ops->set_value(ct, vmax);
+}
+
+static inline int wf_control_set_min(struct wf_control *ct)
+{
+ s32 vmin = ct->ops->get_min(ct);
+ return ct->ops->set_value(ct, vmin);
+}
+
+/*
+ * Sensor objects
+ */
+
+struct wf_sensor;
+
+struct wf_sensor_ops {
+ int (*get_value)(struct wf_sensor *sr, s32 *val);
+ void (*release)(struct wf_sensor *sr);
+ struct module *owner;
+};
+
+struct wf_sensor {
+ struct list_head link;
+ struct wf_sensor_ops *ops;
+ char *name;
+ struct kref ref;
+};
+
+/* Same lifetime rules as controls */
+extern int wf_register_sensor(struct wf_sensor *sr);
+extern void wf_unregister_sensor(struct wf_sensor *sr);
+extern struct wf_sensor * wf_find_sensor(const char *name);
+extern int wf_get_sensor(struct wf_sensor *sr);
+extern void wf_put_sensor(struct wf_sensor *sr);
+
+/* For use by clients. Note that we are a bit racy here since
+ * notifier_block doesn't have a module owner field. I may fix
+ * it one day ...
+ *
+ * LOCKING NOTE !
+ *
+ * All "events" except WF_EVENT_TICK are called with an internal mutex
+ * held which will deadlock if you call basically any core routine.
+ * So don't ! Just take note of the event and do your actual operations
+ * from the ticker.
+ *
+ */
+extern int wf_register_client(struct notifier_block *nb);
+extern int wf_unregister_client(struct notifier_block *nb);
+
+/* Overtemp conditions. Those are refcounted */
+extern void wf_set_overtemp(void);
+extern void wf_clear_overtemp(void);
+extern int wf_is_overtemp(void);
+
+#define WF_EVENT_NEW_CONTROL 0 /* param is wf_control * */
+#define WF_EVENT_NEW_SENSOR 1 /* param is wf_sensor * */
+#define WF_EVENT_OVERTEMP 2 /* no param */
+#define WF_EVENT_NORMALTEMP 3 /* overtemp condition cleared */
+#define WF_EVENT_TICK 4 /* 1 second tick */
+
+/* Note: If that driver gets more broad use, we could replace the
+ * simplistic overtemp bits with "environmental conditions". That
+ * could then be used to also notify of things like fan failure,
+ * case open, battery conditions, ...
+ */
+
+#endif /* __WINDFARM_H__ */
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
new file mode 100644
index 000000000000..6c2a471ea6c0
--- /dev/null
+++ b/drivers/macintosh/windfarm_core.c
@@ -0,0 +1,426 @@
+/*
+ * Windfarm PowerMac thermal control. Core
+ *
+ * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Released under the term of the GNU GPL v2.
+ *
+ * This core code tracks the list of sensors & controls, register
+ * clients, and holds the kernel thread used for control.
+ *
+ * TODO:
+ *
+ * Add some information about sensor/control type and data format to
+ * sensors/controls, and have the sysfs attribute stuff be moved
+ * generically here instead of hard coded in the platform specific
+ * driver as it us currently
+ *
+ * This however requires solving some annoying lifetime issues with
+ * sysfs which doesn't seem to have lifetime rules for struct attribute,
+ * I may have to create full features kobjects for every sensor/control
+ * instead which is a bit of an overkill imho
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
+#include <linux/kthread.h>
+#include <linux/jiffies.h>
+#include <linux/reboot.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include "windfarm.h"
+
+#define VERSION "0.2"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(args...) printk(args)
+#else
+#define DBG(args...) do { } while(0)
+#endif
+
+static LIST_HEAD(wf_controls);
+static LIST_HEAD(wf_sensors);
+static DECLARE_MUTEX(wf_lock);
+static struct notifier_block *wf_client_list;
+static int wf_client_count;
+static unsigned int wf_overtemp;
+static unsigned int wf_overtemp_counter;
+struct task_struct *wf_thread;
+
+/*
+ * Utilities & tick thread
+ */
+
+static inline void wf_notify(int event, void *param)
+{
+ notifier_call_chain(&wf_client_list, event, param);
+}
+
+int wf_critical_overtemp(void)
+{
+ static char * critical_overtemp_path = "/sbin/critical_overtemp";
+ char *argv[] = { critical_overtemp_path, NULL };
+ static char *envp[] = { "HOME=/",
+ "TERM=linux",
+ "PATH=/sbin:/usr/sbin:/bin:/usr/bin",
+ NULL };
+
+ return call_usermodehelper(critical_overtemp_path, argv, envp, 0);
+}
+EXPORT_SYMBOL_GPL(wf_critical_overtemp);
+
+static int wf_thread_func(void *data)
+{
+ unsigned long next, delay;
+
+ next = jiffies;
+
+ DBG("wf: thread started\n");
+
+ while(!kthread_should_stop()) {
+ try_to_freeze();
+
+ if (time_after_eq(jiffies, next)) {
+ wf_notify(WF_EVENT_TICK, NULL);
+ if (wf_overtemp) {
+ wf_overtemp_counter++;
+ /* 10 seconds overtemp, notify userland */
+ if (wf_overtemp_counter > 10)
+ wf_critical_overtemp();
+ /* 30 seconds, shutdown */
+ if (wf_overtemp_counter > 30) {
+ printk(KERN_ERR "windfarm: Overtemp "
+ "for more than 30"
+ " seconds, shutting down\n");
+ machine_power_off();
+ }
+ }
+ next += HZ;
+ }
+
+ delay = next - jiffies;
+ if (delay <= HZ)
+ schedule_timeout_interruptible(delay);
+
+ /* there should be no signal, but oh well */
+ if (signal_pending(current)) {
+ printk(KERN_WARNING "windfarm: thread got sigl !\n");
+ break;
+ }
+ }
+
+ DBG("wf: thread stopped\n");
+
+ return 0;
+}
+
+static void wf_start_thread(void)
+{
+ wf_thread = kthread_run(wf_thread_func, NULL, "kwindfarm");
+ if (IS_ERR(wf_thread)) {
+ printk(KERN_ERR "windfarm: failed to create thread,err %ld\n",
+ PTR_ERR(wf_thread));
+ wf_thread = NULL;
+ }
+}
+
+
+static void wf_stop_thread(void)
+{
+ if (wf_thread)
+ kthread_stop(wf_thread);
+ wf_thread = NULL;
+}
+
+/*
+ * Controls
+ */
+
+static void wf_control_release(struct kref *kref)
+{
+ struct wf_control *ct = container_of(kref, struct wf_control, ref);
+
+ DBG("wf: Deleting control %s\n", ct->name);
+
+ if (ct->ops && ct->ops->release)
+ ct->ops->release(ct);
+ else
+ kfree(ct);
+}
+
+int wf_register_control(struct wf_control *new_ct)
+{
+ struct wf_control *ct;
+
+ down(&wf_lock);
+ list_for_each_entry(ct, &wf_controls, link) {
+ if (!strcmp(ct->name, new_ct->name)) {
+ printk(KERN_WARNING "windfarm: trying to register"
+ " duplicate control %s\n", ct->name);
+ up(&wf_lock);
+ return -EEXIST;
+ }
+ }
+ kref_init(&new_ct->ref);
+ list_add(&new_ct->link, &wf_controls);
+
+ DBG("wf: Registered control %s\n", new_ct->name);
+
+ wf_notify(WF_EVENT_NEW_CONTROL, new_ct);
+ up(&wf_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wf_register_control);
+
+void wf_unregister_control(struct wf_control *ct)
+{
+ down(&wf_lock);
+ list_del(&ct->link);
+ up(&wf_lock);
+
+ DBG("wf: Unregistered control %s\n", ct->name);
+
+ kref_put(&ct->ref, wf_control_release);
+}
+EXPORT_SYMBOL_GPL(wf_unregister_control);
+
+struct wf_control * wf_find_control(const char *name)
+{
+ struct wf_control *ct;
+
+ down(&wf_lock);
+ list_for_each_entry(ct, &wf_controls, link) {
+ if (!strcmp(ct->name, name)) {
+ if (wf_get_control(ct))
+ ct = NULL;
+ up(&wf_lock);
+ return ct;
+ }
+ }
+ up(&wf_lock);
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(wf_find_control);
+
+int wf_get_control(struct wf_control *ct)
+{
+ if (!try_module_get(ct->ops->owner))
+ return -ENODEV;
+ kref_get(&ct->ref);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wf_get_control);
+
+void wf_put_control(struct wf_control *ct)
+{
+ struct module *mod = ct->ops->owner;
+ kref_put(&ct->ref, wf_control_release);
+ module_put(mod);
+}
+EXPORT_SYMBOL_GPL(wf_put_control);
+
+
+/*
+ * Sensors
+ */
+
+
+static void wf_sensor_release(struct kref *kref)
+{
+ struct wf_sensor *sr = container_of(kref, struct wf_sensor, ref);
+
+ DBG("wf: Deleting sensor %s\n", sr->name);
+
+ if (sr->ops && sr->ops->release)
+ sr->ops->release(sr);
+ else
+ kfree(sr);
+}
+
+int wf_register_sensor(struct wf_sensor *new_sr)
+{
+ struct wf_sensor *sr;
+
+ down(&wf_lock);
+ list_for_each_entry(sr, &wf_sensors, link) {
+ if (!strcmp(sr->name, new_sr->name)) {
+ printk(KERN_WARNING "windfarm: trying to register"
+ " duplicate sensor %s\n", sr->name);
+ up(&wf_lock);
+ return -EEXIST;
+ }
+ }
+ kref_init(&new_sr->ref);
+ list_add(&new_sr->link, &wf_sensors);
+
+ DBG("wf: Registered sensor %s\n", new_sr->name);
+
+ wf_notify(WF_EVENT_NEW_SENSOR, new_sr);
+ up(&wf_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wf_register_sensor);
+
+void wf_unregister_sensor(struct wf_sensor *sr)
+{
+ down(&wf_lock);
+ list_del(&sr->link);
+ up(&wf_lock);
+
+ DBG("wf: Unregistered sensor %s\n", sr->name);
+
+ wf_put_sensor(sr);
+}
+EXPORT_SYMBOL_GPL(wf_unregister_sensor);
+
+struct wf_sensor * wf_find_sensor(const char *name)
+{
+ struct wf_sensor *sr;
+
+ down(&wf_lock);
+ list_for_each_entry(sr, &wf_sensors, link) {
+ if (!strcmp(sr->name, name)) {
+ if (wf_get_sensor(sr))
+ sr = NULL;
+ up(&wf_lock);
+ return sr;
+ }
+ }
+ up(&wf_lock);
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(wf_find_sensor);
+
+int wf_get_sensor(struct wf_sensor *sr)
+{
+ if (!try_module_get(sr->ops->owner))
+ return -ENODEV;
+ kref_get(&sr->ref);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wf_get_sensor);
+
+void wf_put_sensor(struct wf_sensor *sr)
+{
+ struct module *mod = sr->ops->owner;
+ kref_put(&sr->ref, wf_sensor_release);
+ module_put(mod);
+}
+EXPORT_SYMBOL_GPL(wf_put_sensor);
+
+
+/*
+ * Client & notification
+ */
+
+int wf_register_client(struct notifier_block *nb)
+{
+ int rc;
+ struct wf_control *ct;
+ struct wf_sensor *sr;
+
+ down(&wf_lock);
+ rc = notifier_chain_register(&wf_client_list, nb);
+ if (rc != 0)
+ goto bail;
+ wf_client_count++;
+ list_for_each_entry(ct, &wf_controls, link)
+ wf_notify(WF_EVENT_NEW_CONTROL, ct);
+ list_for_each_entry(sr, &wf_sensors, link)
+ wf_notify(WF_EVENT_NEW_SENSOR, sr);
+ if (wf_client_count == 1)
+ wf_start_thread();
+ bail:
+ up(&wf_lock);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(wf_register_client);
+
+int wf_unregister_client(struct notifier_block *nb)
+{
+ down(&wf_lock);
+ notifier_chain_unregister(&wf_client_list, nb);
+ wf_client_count++;
+ if (wf_client_count == 0)
+ wf_stop_thread();
+ up(&wf_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wf_unregister_client);
+
+void wf_set_overtemp(void)
+{
+ down(&wf_lock);
+ wf_overtemp++;
+ if (wf_overtemp == 1) {
+ printk(KERN_WARNING "windfarm: Overtemp condition detected !\n");
+ wf_overtemp_counter = 0;
+ wf_notify(WF_EVENT_OVERTEMP, NULL);
+ }
+ up(&wf_lock);
+}
+EXPORT_SYMBOL_GPL(wf_set_overtemp);
+
+void wf_clear_overtemp(void)
+{
+ down(&wf_lock);
+ WARN_ON(wf_overtemp == 0);
+ if (wf_overtemp == 0) {
+ up(&wf_lock);
+ return;
+ }
+ wf_overtemp--;
+ if (wf_overtemp == 0) {
+ printk(KERN_WARNING "windfarm: Overtemp condition cleared !\n");
+ wf_notify(WF_EVENT_NORMALTEMP, NULL);
+ }
+ up(&wf_lock);
+}
+EXPORT_SYMBOL_GPL(wf_clear_overtemp);
+
+int wf_is_overtemp(void)
+{
+ return (wf_overtemp != 0);
+}
+EXPORT_SYMBOL_GPL(wf_is_overtemp);
+
+static struct platform_device wf_platform_device = {
+ .name = "windfarm",
+};
+
+static int __init windfarm_core_init(void)
+{
+ DBG("wf: core loaded\n");
+
+ platform_device_register(&wf_platform_device);
+ return 0;
+}
+
+static void __exit windfarm_core_exit(void)
+{
+ BUG_ON(wf_client_count != 0);
+
+ DBG("wf: core unloaded\n");
+
+ platform_device_unregister(&wf_platform_device);
+}
+
+
+module_init(windfarm_core_init);
+module_exit(windfarm_core_exit);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("Core component of PowerMac thermal control");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/macintosh/windfarm_cpufreq_clamp.c b/drivers/macintosh/windfarm_cpufreq_clamp.c
new file mode 100644
index 000000000000..607dbaca69c9
--- /dev/null
+++ b/drivers/macintosh/windfarm_cpufreq_clamp.c
@@ -0,0 +1,105 @@
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/cpufreq.h>
+
+#include "windfarm.h"
+
+#define VERSION "0.3"
+
+static int clamped;
+static struct wf_control *clamp_control;
+
+static int clamp_notifier_call(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ struct cpufreq_policy *p = data;
+ unsigned long max_freq;
+
+ if (event != CPUFREQ_ADJUST)
+ return 0;
+
+ max_freq = clamped ? (p->cpuinfo.min_freq) : (p->cpuinfo.max_freq);
+ cpufreq_verify_within_limits(p, 0, max_freq);
+
+ return 0;
+}
+
+static struct notifier_block clamp_notifier = {
+ .notifier_call = clamp_notifier_call,
+};
+
+static int clamp_set(struct wf_control *ct, s32 value)
+{
+ if (value)
+ printk(KERN_INFO "windfarm: Clamping CPU frequency to "
+ "minimum !\n");
+ else
+ printk(KERN_INFO "windfarm: CPU frequency unclamped !\n");
+ clamped = value;
+ cpufreq_update_policy(0);
+ return 0;
+}
+
+static int clamp_get(struct wf_control *ct, s32 *value)
+{
+ *value = clamped;
+ return 0;
+}
+
+static s32 clamp_min(struct wf_control *ct)
+{
+ return 0;
+}
+
+static s32 clamp_max(struct wf_control *ct)
+{
+ return 1;
+}
+
+static struct wf_control_ops clamp_ops = {
+ .set_value = clamp_set,
+ .get_value = clamp_get,
+ .get_min = clamp_min,
+ .get_max = clamp_max,
+ .owner = THIS_MODULE,
+};
+
+static int __init wf_cpufreq_clamp_init(void)
+{
+ struct wf_control *clamp;
+
+ clamp = kmalloc(sizeof(struct wf_control), GFP_KERNEL);
+ if (clamp == NULL)
+ return -ENOMEM;
+ cpufreq_register_notifier(&clamp_notifier, CPUFREQ_POLICY_NOTIFIER);
+ clamp->ops = &clamp_ops;
+ clamp->name = "cpufreq-clamp";
+ if (wf_register_control(clamp))
+ goto fail;
+ clamp_control = clamp;
+ return 0;
+ fail:
+ kfree(clamp);
+ return -ENODEV;
+}
+
+static void __exit wf_cpufreq_clamp_exit(void)
+{
+ if (clamp_control)
+ wf_unregister_control(clamp_control);
+}
+
+
+module_init(wf_cpufreq_clamp_init);
+module_exit(wf_cpufreq_clamp_exit);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("CPU frequency clamp for PowerMacs thermal control");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
new file mode 100644
index 000000000000..a0a41ad0f2b5
--- /dev/null
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -0,0 +1,263 @@
+/*
+ * Windfarm PowerMac thermal control. LM75 sensor
+ *
+ * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Released under the term of the GNU GPL v2.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/i2c.h>
+#include <linux/i2c-dev.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/sections.h>
+
+#include "windfarm.h"
+
+#define VERSION "0.1"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(args...) printk(args)
+#else
+#define DBG(args...) do { } while(0)
+#endif
+
+struct wf_lm75_sensor {
+ int ds1775 : 1;
+ int inited : 1;
+ struct i2c_client i2c;
+ struct wf_sensor sens;
+};
+#define wf_to_lm75(c) container_of(c, struct wf_lm75_sensor, sens)
+#define i2c_to_lm75(c) container_of(c, struct wf_lm75_sensor, i2c)
+
+static int wf_lm75_attach(struct i2c_adapter *adapter);
+static int wf_lm75_detach(struct i2c_client *client);
+
+static struct i2c_driver wf_lm75_driver = {
+ .owner = THIS_MODULE,
+ .name = "wf_lm75",
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = wf_lm75_attach,
+ .detach_client = wf_lm75_detach,
+};
+
+static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
+{
+ struct wf_lm75_sensor *lm = wf_to_lm75(sr);
+ s32 data;
+
+ if (lm->i2c.adapter == NULL)
+ return -ENODEV;
+
+ /* Init chip if necessary */
+ if (!lm->inited) {
+ u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(&lm->i2c, 1);
+
+ DBG("wf_lm75: Initializing %s, cfg was: %02x\n",
+ sr->name, cfg);
+
+ /* clear shutdown bit, keep other settings as left by
+ * the firmware for now
+ */
+ cfg_new = cfg & ~0x01;
+ i2c_smbus_write_byte_data(&lm->i2c, 1, cfg_new);
+ lm->inited = 1;
+
+ /* If we just powered it up, let's wait 200 ms */
+ msleep(200);
+ }
+
+ /* Read temperature register */
+ data = (s32)le16_to_cpu(i2c_smbus_read_word_data(&lm->i2c, 0));
+ data <<= 8;
+ *value = data;
+
+ return 0;
+}
+
+static void wf_lm75_release(struct wf_sensor *sr)
+{
+ struct wf_lm75_sensor *lm = wf_to_lm75(sr);
+
+ /* check if client is registered and detach from i2c */
+ if (lm->i2c.adapter) {
+ i2c_detach_client(&lm->i2c);
+ lm->i2c.adapter = NULL;
+ }
+
+ kfree(lm);
+}
+
+static struct wf_sensor_ops wf_lm75_ops = {
+ .get_value = wf_lm75_get,
+ .release = wf_lm75_release,
+ .owner = THIS_MODULE,
+};
+
+static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
+ u8 addr, int ds1775,
+ const char *loc)
+{
+ struct wf_lm75_sensor *lm;
+
+ DBG("wf_lm75: creating %s device at address 0x%02x\n",
+ ds1775 ? "ds1775" : "lm75", addr);
+
+ lm = kmalloc(sizeof(struct wf_lm75_sensor), GFP_KERNEL);
+ if (lm == NULL)
+ return NULL;
+ memset(lm, 0, sizeof(struct wf_lm75_sensor));
+
+ /* Usual rant about sensor names not beeing very consistent in
+ * the device-tree, oh well ...
+ * Add more entries below as you deal with more setups
+ */
+ if (!strcmp(loc, "Hard drive") || !strcmp(loc, "DRIVE BAY"))
+ lm->sens.name = "hd-temp";
+ else
+ goto fail;
+
+ lm->inited = 0;
+ lm->sens.ops = &wf_lm75_ops;
+ lm->ds1775 = ds1775;
+ lm->i2c.addr = (addr >> 1) & 0x7f;
+ lm->i2c.adapter = adapter;
+ lm->i2c.driver = &wf_lm75_driver;
+ strncpy(lm->i2c.name, lm->sens.name, I2C_NAME_SIZE-1);
+
+ if (i2c_attach_client(&lm->i2c)) {
+ printk(KERN_ERR "windfarm: failed to attach %s %s to i2c\n",
+ ds1775 ? "ds1775" : "lm75", lm->i2c.name);
+ goto fail;
+ }
+
+ if (wf_register_sensor(&lm->sens)) {
+ i2c_detach_client(&lm->i2c);
+ goto fail;
+ }
+
+ return lm;
+ fail:
+ kfree(lm);
+ return NULL;
+}
+
+static int wf_lm75_attach(struct i2c_adapter *adapter)
+{
+ u8 bus_id;
+ struct device_node *smu, *bus, *dev;
+
+ /* We currently only deal with LM75's hanging off the SMU
+ * i2c busses. If we extend that driver to other/older
+ * machines, we should split this function into SMU-i2c,
+ * keywest-i2c, PMU-i2c, ...
+ */
+
+ DBG("wf_lm75: adapter %s detected\n", adapter->name);
+
+ if (strncmp(adapter->name, "smu-i2c-", 8) != 0)
+ return 0;
+ smu = of_find_node_by_type(NULL, "smu");
+ if (smu == NULL)
+ return 0;
+
+ /* Look for the bus in the device-tree */
+ bus_id = (u8)simple_strtoul(adapter->name + 8, NULL, 16);
+
+ DBG("wf_lm75: bus ID is %x\n", bus_id);
+
+ /* Look for sensors subdir */
+ for (bus = NULL;
+ (bus = of_get_next_child(smu, bus)) != NULL;) {
+ u32 *reg;
+
+ if (strcmp(bus->name, "i2c"))
+ continue;
+ reg = (u32 *)get_property(bus, "reg", NULL);
+ if (reg == NULL)
+ continue;
+ if (bus_id == *reg)
+ break;
+ }
+ of_node_put(smu);
+ if (bus == NULL) {
+ printk(KERN_WARNING "windfarm: SMU i2c bus 0x%x not found"
+ " in device-tree !\n", bus_id);
+ return 0;
+ }
+
+ DBG("wf_lm75: bus found, looking for device...\n");
+
+ /* Now look for lm75(s) in there */
+ for (dev = NULL;
+ (dev = of_get_next_child(bus, dev)) != NULL;) {
+ const char *loc =
+ get_property(dev, "hwsensor-location", NULL);
+ u32 *reg = (u32 *)get_property(dev, "reg", NULL);
+ DBG(" dev: %s... (loc: %p, reg: %p)\n", dev->name, loc, reg);
+ if (loc == NULL || reg == NULL)
+ continue;
+ /* real lm75 */
+ if (device_is_compatible(dev, "lm75"))
+ wf_lm75_create(adapter, *reg, 0, loc);
+ /* ds1775 (compatible, better resolution */
+ else if (device_is_compatible(dev, "ds1775"))
+ wf_lm75_create(adapter, *reg, 1, loc);
+ }
+
+ of_node_put(bus);
+
+ return 0;
+}
+
+static int wf_lm75_detach(struct i2c_client *client)
+{
+ struct wf_lm75_sensor *lm = i2c_to_lm75(client);
+
+ DBG("wf_lm75: i2c detatch called for %s\n", lm->sens.name);
+
+ /* Mark client detached */
+ lm->i2c.adapter = NULL;
+
+ /* release sensor */
+ wf_unregister_sensor(&lm->sens);
+
+ return 0;
+}
+
+static int __init wf_lm75_sensor_init(void)
+{
+ int rc;
+
+ rc = i2c_add_driver(&wf_lm75_driver);
+ if (rc < 0)
+ return rc;
+ return 0;
+}
+
+static void __exit wf_lm75_sensor_exit(void)
+{
+ i2c_del_driver(&wf_lm75_driver);
+}
+
+
+module_init(wf_lm75_sensor_init);
+module_exit(wf_lm75_sensor_exit);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("LM75 sensor objects for PowerMacs thermal control");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/macintosh/windfarm_pid.c b/drivers/macintosh/windfarm_pid.c
new file mode 100644
index 000000000000..2e803b368757
--- /dev/null
+++ b/drivers/macintosh/windfarm_pid.c
@@ -0,0 +1,145 @@
+/*
+ * Windfarm PowerMac thermal control. Generic PID helpers
+ *
+ * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Released under the term of the GNU GPL v2.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+#include "windfarm_pid.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(args...) printk(args)
+#else
+#define DBG(args...) do { } while(0)
+#endif
+
+void wf_pid_init(struct wf_pid_state *st, struct wf_pid_param *param)
+{
+ memset(st, 0, sizeof(struct wf_pid_state));
+ st->param = *param;
+ st->first = 1;
+}
+EXPORT_SYMBOL_GPL(wf_pid_init);
+
+s32 wf_pid_run(struct wf_pid_state *st, s32 new_sample)
+{
+ s64 error, integ, deriv;
+ s32 target;
+ int i, hlen = st->param.history_len;
+
+ /* Calculate error term */
+ error = new_sample - st->param.itarget;
+
+ /* Get samples into our history buffer */
+ if (st->first) {
+ for (i = 0; i < hlen; i++) {
+ st->samples[i] = new_sample;
+ st->errors[i] = error;
+ }
+ st->first = 0;
+ st->index = 0;
+ } else {
+ st->index = (st->index + 1) % hlen;
+ st->samples[st->index] = new_sample;
+ st->errors[st->index] = error;
+ }
+
+ /* Calculate integral term */
+ for (i = 0, integ = 0; i < hlen; i++)
+ integ += st->errors[(st->index + hlen - i) % hlen];
+ integ *= st->param.interval;
+
+ /* Calculate derivative term */
+ deriv = st->errors[st->index] -
+ st->errors[(st->index + hlen - 1) % hlen];
+ deriv /= st->param.interval;
+
+ /* Calculate target */
+ target = (s32)((integ * (s64)st->param.gr + deriv * (s64)st->param.gd +
+ error * (s64)st->param.gp) >> 36);
+ if (st->param.additive)
+ target += st->target;
+ target = max(target, st->param.min);
+ target = min(target, st->param.max);
+ st->target = target;
+
+ return st->target;
+}
+EXPORT_SYMBOL_GPL(wf_pid_run);
+
+void wf_cpu_pid_init(struct wf_cpu_pid_state *st,
+ struct wf_cpu_pid_param *param)
+{
+ memset(st, 0, sizeof(struct wf_cpu_pid_state));
+ st->param = *param;
+ st->first = 1;
+}
+EXPORT_SYMBOL_GPL(wf_cpu_pid_init);
+
+s32 wf_cpu_pid_run(struct wf_cpu_pid_state *st, s32 new_power, s32 new_temp)
+{
+ s64 error, integ, deriv, prop;
+ s32 target, sval, adj;
+ int i, hlen = st->param.history_len;
+
+ /* Calculate error term */
+ error = st->param.pmaxadj - new_power;
+
+ /* Get samples into our history buffer */
+ if (st->first) {
+ for (i = 0; i < hlen; i++) {
+ st->powers[i] = new_power;
+ st->errors[i] = error;
+ }
+ st->temps[0] = st->temps[1] = new_temp;
+ st->first = 0;
+ st->index = st->tindex = 0;
+ } else {
+ st->index = (st->index + 1) % hlen;
+ st->powers[st->index] = new_power;
+ st->errors[st->index] = error;
+ st->tindex = (st->tindex + 1) % 2;
+ st->temps[st->tindex] = new_temp;
+ }
+
+ /* Calculate integral term */
+ for (i = 0, integ = 0; i < hlen; i++)
+ integ += st->errors[(st->index + hlen - i) % hlen];
+ integ *= st->param.interval;
+ integ *= st->param.gr;
+ sval = st->param.tmax - ((integ >> 20) & 0xffffffff);
+ adj = min(st->param.ttarget, sval);
+
+ DBG("integ: %lx, sval: %lx, adj: %lx\n", integ, sval, adj);
+
+ /* Calculate derivative term */
+ deriv = st->temps[st->tindex] -
+ st->temps[(st->tindex + 2 - 1) % 2];
+ deriv /= st->param.interval;
+ deriv *= st->param.gd;
+
+ /* Calculate proportional term */
+ prop = (new_temp - adj);
+ prop *= st->param.gp;
+
+ DBG("deriv: %lx, prop: %lx\n", deriv, prop);
+
+ /* Calculate target */
+ target = st->target + (s32)((deriv + prop) >> 36);
+ target = max(target, st->param.min);
+ target = min(target, st->param.max);
+ st->target = target;
+
+ return st->target;
+}
+EXPORT_SYMBOL_GPL(wf_cpu_pid_run);
diff --git a/drivers/macintosh/windfarm_pid.h b/drivers/macintosh/windfarm_pid.h
new file mode 100644
index 000000000000..a364c2a2499c
--- /dev/null
+++ b/drivers/macintosh/windfarm_pid.h
@@ -0,0 +1,84 @@
+/*
+ * Windfarm PowerMac thermal control. Generic PID helpers
+ *
+ * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Released under the term of the GNU GPL v2.
+ *
+ * This is a pair of generic PID helpers that can be used by
+ * control loops. One is the basic PID implementation, the
+ * other one is more specifically tailored to the loops used
+ * for CPU control with 2 input sample types (temp and power)
+ */
+
+/*
+ * *** Simple PID ***
+ */
+
+#define WF_PID_MAX_HISTORY 32
+
+/* This parameter array is passed to the PID algorithm. Currently,
+ * we don't support changing parameters on the fly as it's not needed
+ * but could be implemented (with necessary adjustment of the history
+ * buffer
+ */
+struct wf_pid_param {
+ int interval; /* Interval between samples in seconds */
+ int history_len; /* Size of history buffer */
+ int additive; /* 1: target relative to previous value */
+ s32 gd, gp, gr; /* PID gains */
+ s32 itarget; /* PID input target */
+ s32 min,max; /* min and max target values */
+};
+
+struct wf_pid_state {
+ int first; /* first run of the loop */
+ int index; /* index of current sample */
+ s32 target; /* current target value */
+ s32 samples[WF_PID_MAX_HISTORY]; /* samples history buffer */
+ s32 errors[WF_PID_MAX_HISTORY]; /* error history buffer */
+
+ struct wf_pid_param param;
+};
+
+extern void wf_pid_init(struct wf_pid_state *st, struct wf_pid_param *param);
+extern s32 wf_pid_run(struct wf_pid_state *st, s32 sample);
+
+
+/*
+ * *** CPU PID ***
+ */
+
+#define WF_CPU_PID_MAX_HISTORY 32
+
+/* This parameter array is passed to the CPU PID algorithm. Currently,
+ * we don't support changing parameters on the fly as it's not needed
+ * but could be implemented (with necessary adjustment of the history
+ * buffer
+ */
+struct wf_cpu_pid_param {
+ int interval; /* Interval between samples in seconds */
+ int history_len; /* Size of history buffer */
+ s32 gd, gp, gr; /* PID gains */
+ s32 pmaxadj; /* PID max power adjust */
+ s32 ttarget; /* PID input target */
+ s32 tmax; /* PID input max */
+ s32 min,max; /* min and max target values */
+};
+
+struct wf_cpu_pid_state {
+ int first; /* first run of the loop */
+ int index; /* index of current power */
+ int tindex; /* index of current temp */
+ s32 target; /* current target value */
+ s32 powers[WF_PID_MAX_HISTORY]; /* power history buffer */
+ s32 errors[WF_PID_MAX_HISTORY]; /* error history buffer */
+ s32 temps[2]; /* temp. history buffer */
+
+ struct wf_cpu_pid_param param;
+};
+
+extern void wf_cpu_pid_init(struct wf_cpu_pid_state *st,
+ struct wf_cpu_pid_param *param);
+extern s32 wf_cpu_pid_run(struct wf_cpu_pid_state *st, s32 power, s32 temp);
diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c
new file mode 100644
index 000000000000..322c74b2687f
--- /dev/null
+++ b/drivers/macintosh/windfarm_pm81.c
@@ -0,0 +1,879 @@
+/*
+ * Windfarm PowerMac thermal control. iMac G5
+ *
+ * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Released under the term of the GNU GPL v2.
+ *
+ * The algorithm used is the PID control algorithm, used the same
+ * way the published Darwin code does, using the same values that
+ * are present in the Darwin 8.2 snapshot property lists (note however
+ * that none of the code has been re-used, it's a complete re-implementation
+ *
+ * The various control loops found in Darwin config file are:
+ *
+ * PowerMac8,1 and PowerMac8,2
+ * ===========================
+ *
+ * System Fans control loop. Different based on models. In addition to the
+ * usual PID algorithm, the control loop gets 2 additional pairs of linear
+ * scaling factors (scale/offsets) expressed as 4.12 fixed point values
+ * signed offset, unsigned scale)
+ *
+ * The targets are modified such as:
+ * - the linked control (second control) gets the target value as-is
+ * (typically the drive fan)
+ * - the main control (first control) gets the target value scaled with
+ * the first pair of factors, and is then modified as below
+ * - the value of the target of the CPU Fan control loop is retreived,
+ * scaled with the second pair of factors, and the max of that and
+ * the scaled target is applied to the main control.
+ *
+ * # model_id: 2
+ * controls : system-fan, drive-bay-fan
+ * sensors : hd-temp
+ * PID params : G_d = 0x15400000
+ * G_p = 0x00200000
+ * G_r = 0x000002fd
+ * History = 2 entries
+ * Input target = 0x3a0000
+ * Interval = 5s
+ * linear-factors : offset = 0xff38 scale = 0x0ccd
+ * offset = 0x0208 scale = 0x07ae
+ *
+ * # model_id: 3
+ * controls : system-fan, drive-bay-fan
+ * sensors : hd-temp
+ * PID params : G_d = 0x08e00000
+ * G_p = 0x00566666
+ * G_r = 0x0000072b
+ * History = 2 entries
+ * Input target = 0x350000
+ * Interval = 5s
+ * linear-factors : offset = 0xff38 scale = 0x0ccd
+ * offset = 0x0000 scale = 0x0000
+ *
+ * # model_id: 5
+ * controls : system-fan
+ * sensors : hd-temp
+ * PID params : G_d = 0x15400000
+ * G_p = 0x00233333
+ * G_r = 0x000002fd
+ * History = 2 entries
+ * Input target = 0x3a0000
+ * Interval = 5s
+ * linear-factors : offset = 0x0000 scale = 0x1000
+ * offset = 0x0091 scale = 0x0bae
+ *
+ * CPU Fan control loop. The loop is identical for all models. it
+ * has an additional pair of scaling factor. This is used to scale the
+ * systems fan control loop target result (the one before it gets scaled
+ * by the System Fans control loop itself). Then, the max value of the
+ * calculated target value and system fan value is sent to the fans
+ *
+ * controls : cpu-fan
+ * sensors : cpu-temp cpu-power
+ * PID params : From SMU sdb partition
+ * linear-factors : offset = 0xfb50 scale = 0x1000
+ *
+ * CPU Slew control loop. Not implemented. The cpufreq driver in linux is
+ * completely separate for now, though we could find a way to link it, either
+ * as a client reacting to overtemp notifications, or directling monitoring
+ * the CPU temperature
+ *
+ * WARNING ! The CPU control loop requires the CPU tmax for the current
+ * operating point. However, we currently are completely separated from
+ * the cpufreq driver and thus do not know what the current operating
+ * point is. Fortunately, we also do not have any hardware supporting anything
+ * but operating point 0 at the moment, thus we just peek that value directly
+ * from the SDB partition. If we ever end up with actually slewing the system
+ * clock and thus changing operating points, we'll have to find a way to
+ * communicate with the CPU freq driver;
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/kmod.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/sections.h>
+#include <asm/smu.h>
+
+#include "windfarm.h"
+#include "windfarm_pid.h"
+
+#define VERSION "0.4"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(args...) printk(args)
+#else
+#define DBG(args...) do { } while(0)
+#endif
+
+/* define this to force CPU overtemp to 74 degree, useful for testing
+ * the overtemp code
+ */
+#undef HACKED_OVERTEMP
+
+static int wf_smu_mach_model; /* machine model id */
+
+static struct device *wf_smu_dev;
+
+/* Controls & sensors */
+static struct wf_sensor *sensor_cpu_power;
+static struct wf_sensor *sensor_cpu_temp;
+static struct wf_sensor *sensor_hd_temp;
+static struct wf_control *fan_cpu_main;
+static struct wf_control *fan_hd;
+static struct wf_control *fan_system;
+static struct wf_control *cpufreq_clamp;
+
+/* Set to kick the control loop into life */
+static int wf_smu_all_controls_ok, wf_smu_all_sensors_ok, wf_smu_started;
+
+/* Failure handling.. could be nicer */
+#define FAILURE_FAN 0x01
+#define FAILURE_SENSOR 0x02
+#define FAILURE_OVERTEMP 0x04
+
+static unsigned int wf_smu_failure_state;
+static int wf_smu_readjust, wf_smu_skipping;
+
+/*
+ * ****** System Fans Control Loop ******
+ *
+ */
+
+/* Parameters for the System Fans control loop. Parameters
+ * not in this table such as interval, history size, ...
+ * are common to all versions and thus hard coded for now.
+ */
+struct wf_smu_sys_fans_param {
+ int model_id;
+ s32 itarget;
+ s32 gd, gp, gr;
+
+ s16 offset0;
+ u16 scale0;
+ s16 offset1;
+ u16 scale1;
+};
+
+#define WF_SMU_SYS_FANS_INTERVAL 5
+#define WF_SMU_SYS_FANS_HISTORY_SIZE 2
+
+/* State data used by the system fans control loop
+ */
+struct wf_smu_sys_fans_state {
+ int ticks;
+ s32 sys_setpoint;
+ s32 hd_setpoint;
+ s16 offset0;
+ u16 scale0;
+ s16 offset1;
+ u16 scale1;
+ struct wf_pid_state pid;
+};
+
+/*
+ * Configs for SMU Sytem Fan control loop
+ */
+static struct wf_smu_sys_fans_param wf_smu_sys_all_params[] = {
+ /* Model ID 2 */
+ {
+ .model_id = 2,
+ .itarget = 0x3a0000,
+ .gd = 0x15400000,
+ .gp = 0x00200000,
+ .gr = 0x000002fd,
+ .offset0 = 0xff38,
+ .scale0 = 0x0ccd,
+ .offset1 = 0x0208,
+ .scale1 = 0x07ae,
+ },
+ /* Model ID 3 */
+ {
+ .model_id = 2,
+ .itarget = 0x350000,
+ .gd = 0x08e00000,
+ .gp = 0x00566666,
+ .gr = 0x0000072b,
+ .offset0 = 0xff38,
+ .scale0 = 0x0ccd,
+ .offset1 = 0x0000,
+ .scale1 = 0x0000,
+ },
+ /* Model ID 5 */
+ {
+ .model_id = 2,
+ .itarget = 0x3a0000,
+ .gd = 0x15400000,
+ .gp = 0x00233333,
+ .gr = 0x000002fd,
+ .offset0 = 0x0000,
+ .scale0 = 0x1000,
+ .offset1 = 0x0091,
+ .scale1 = 0x0bae,
+ },
+};
+#define WF_SMU_SYS_FANS_NUM_CONFIGS ARRAY_SIZE(wf_smu_sys_all_params)
+
+static struct wf_smu_sys_fans_state *wf_smu_sys_fans;
+
+/*
+ * ****** CPU Fans Control Loop ******
+ *
+ */
+
+
+#define WF_SMU_CPU_FANS_INTERVAL 1
+#define WF_SMU_CPU_FANS_MAX_HISTORY 16
+#define WF_SMU_CPU_FANS_SIBLING_SCALE 0x00001000
+#define WF_SMU_CPU_FANS_SIBLING_OFFSET 0xfffffb50
+
+/* State data used by the cpu fans control loop
+ */
+struct wf_smu_cpu_fans_state {
+ int ticks;
+ s32 cpu_setpoint;
+ s32 scale;
+ s32 offset;
+ struct wf_cpu_pid_state pid;
+};
+
+static struct wf_smu_cpu_fans_state *wf_smu_cpu_fans;
+
+
+
+/*
+ * ***** Implementation *****
+ *
+ */
+
+static void wf_smu_create_sys_fans(void)
+{
+ struct wf_smu_sys_fans_param *param = NULL;
+ struct wf_pid_param pid_param;
+ int i;
+
+ /* First, locate the params for this model */
+ for (i = 0; i < WF_SMU_SYS_FANS_NUM_CONFIGS; i++)
+ if (wf_smu_sys_all_params[i].model_id == wf_smu_mach_model) {
+ param = &wf_smu_sys_all_params[i];
+ break;
+ }
+
+ /* No params found, put fans to max */
+ if (param == NULL) {
+ printk(KERN_WARNING "windfarm: System fan config not found "
+ "for this machine model, max fan speed\n");
+ goto fail;
+ }
+
+ /* Alloc & initialize state */
+ wf_smu_sys_fans = kmalloc(sizeof(struct wf_smu_sys_fans_state),
+ GFP_KERNEL);
+ if (wf_smu_sys_fans == NULL) {
+ printk(KERN_WARNING "windfarm: Memory allocation error"
+ " max fan speed\n");
+ goto fail;
+ }
+ wf_smu_sys_fans->ticks = 1;
+ wf_smu_sys_fans->scale0 = param->scale0;
+ wf_smu_sys_fans->offset0 = param->offset0;
+ wf_smu_sys_fans->scale1 = param->scale1;
+ wf_smu_sys_fans->offset1 = param->offset1;
+
+ /* Fill PID params */
+ pid_param.gd = param->gd;
+ pid_param.gp = param->gp;
+ pid_param.gr = param->gr;
+ pid_param.interval = WF_SMU_SYS_FANS_INTERVAL;
+ pid_param.history_len = WF_SMU_SYS_FANS_HISTORY_SIZE;
+ pid_param.itarget = param->itarget;
+ pid_param.min = fan_system->ops->get_min(fan_system);
+ pid_param.max = fan_system->ops->get_max(fan_system);
+ if (fan_hd) {
+ pid_param.min =
+ max(pid_param.min,fan_hd->ops->get_min(fan_hd));
+ pid_param.max =
+ min(pid_param.max,fan_hd->ops->get_max(fan_hd));
+ }
+ wf_pid_init(&wf_smu_sys_fans->pid, &pid_param);
+
+ DBG("wf: System Fan control initialized.\n");
+ DBG(" itarged=%d.%03d, min=%d RPM, max=%d RPM\n",
+ FIX32TOPRINT(pid_param.itarget), pid_param.min, pid_param.max);
+ return;
+
+ fail:
+
+ if (fan_system)
+ wf_control_set_max(fan_system);
+ if (fan_hd)
+ wf_control_set_max(fan_hd);
+}
+
+static void wf_smu_sys_fans_tick(struct wf_smu_sys_fans_state *st)
+{
+ s32 new_setpoint, temp, scaled, cputarget;
+ int rc;
+
+ if (--st->ticks != 0) {
+ if (wf_smu_readjust)
+ goto readjust;
+ return;
+ }
+ st->ticks = WF_SMU_SYS_FANS_INTERVAL;
+
+ rc = sensor_hd_temp->ops->get_value(sensor_hd_temp, &temp);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: HD temp sensor error %d\n",
+ rc);
+ wf_smu_failure_state |= FAILURE_SENSOR;
+ return;
+ }
+
+ DBG("wf_smu: System Fans tick ! HD temp: %d.%03d\n",
+ FIX32TOPRINT(temp));
+
+ if (temp > (st->pid.param.itarget + 0x50000))
+ wf_smu_failure_state |= FAILURE_OVERTEMP;
+
+ new_setpoint = wf_pid_run(&st->pid, temp);
+
+ DBG("wf_smu: new_setpoint: %d RPM\n", (int)new_setpoint);
+
+ scaled = ((((s64)new_setpoint) * (s64)st->scale0) >> 12) + st->offset0;
+
+ DBG("wf_smu: scaled setpoint: %d RPM\n", (int)scaled);
+
+ cputarget = wf_smu_cpu_fans ? wf_smu_cpu_fans->pid.target : 0;
+ cputarget = ((((s64)cputarget) * (s64)st->scale1) >> 12) + st->offset1;
+ scaled = max(scaled, cputarget);
+ scaled = max(scaled, st->pid.param.min);
+ scaled = min(scaled, st->pid.param.max);
+
+ DBG("wf_smu: adjusted setpoint: %d RPM\n", (int)scaled);
+
+ if (st->sys_setpoint == scaled && new_setpoint == st->hd_setpoint)
+ return;
+ st->sys_setpoint = scaled;
+ st->hd_setpoint = new_setpoint;
+ readjust:
+ if (fan_system && wf_smu_failure_state == 0) {
+ rc = fan_system->ops->set_value(fan_system, st->sys_setpoint);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: Sys fan error %d\n",
+ rc);
+ wf_smu_failure_state |= FAILURE_FAN;
+ }
+ }
+ if (fan_hd && wf_smu_failure_state == 0) {
+ rc = fan_hd->ops->set_value(fan_hd, st->hd_setpoint);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: HD fan error %d\n",
+ rc);
+ wf_smu_failure_state |= FAILURE_FAN;
+ }
+ }
+}
+
+static void wf_smu_create_cpu_fans(void)
+{
+ struct wf_cpu_pid_param pid_param;
+ struct smu_sdbp_header *hdr;
+ struct smu_sdbp_cpupiddata *piddata;
+ struct smu_sdbp_fvt *fvt;
+ s32 tmax, tdelta, maxpow, powadj;
+
+ /* First, locate the PID params in SMU SBD */
+ hdr = smu_get_sdb_partition(SMU_SDB_CPUPIDDATA_ID, NULL);
+ if (hdr == 0) {
+ printk(KERN_WARNING "windfarm: CPU PID fan config not found "
+ "max fan speed\n");
+ goto fail;
+ }
+ piddata = (struct smu_sdbp_cpupiddata *)&hdr[1];
+
+ /* Get the FVT params for operating point 0 (the only supported one
+ * for now) in order to get tmax
+ */
+ hdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
+ if (hdr) {
+ fvt = (struct smu_sdbp_fvt *)&hdr[1];
+ tmax = ((s32)fvt->maxtemp) << 16;
+ } else
+ tmax = 0x5e0000; /* 94 degree default */
+
+ /* Alloc & initialize state */
+ wf_smu_cpu_fans = kmalloc(sizeof(struct wf_smu_cpu_fans_state),
+ GFP_KERNEL);
+ if (wf_smu_cpu_fans == NULL)
+ goto fail;
+ wf_smu_cpu_fans->ticks = 1;
+
+ wf_smu_cpu_fans->scale = WF_SMU_CPU_FANS_SIBLING_SCALE;
+ wf_smu_cpu_fans->offset = WF_SMU_CPU_FANS_SIBLING_OFFSET;
+
+ /* Fill PID params */
+ pid_param.interval = WF_SMU_CPU_FANS_INTERVAL;
+ pid_param.history_len = piddata->history_len;
+ if (pid_param.history_len > WF_CPU_PID_MAX_HISTORY) {
+ printk(KERN_WARNING "windfarm: History size overflow on "
+ "CPU control loop (%d)\n", piddata->history_len);
+ pid_param.history_len = WF_CPU_PID_MAX_HISTORY;
+ }
+ pid_param.gd = piddata->gd;
+ pid_param.gp = piddata->gp;
+ pid_param.gr = piddata->gr / pid_param.history_len;
+
+ tdelta = ((s32)piddata->target_temp_delta) << 16;
+ maxpow = ((s32)piddata->max_power) << 16;
+ powadj = ((s32)piddata->power_adj) << 16;
+
+ pid_param.tmax = tmax;
+ pid_param.ttarget = tmax - tdelta;
+ pid_param.pmaxadj = maxpow - powadj;
+
+ pid_param.min = fan_cpu_main->ops->get_min(fan_cpu_main);
+ pid_param.max = fan_cpu_main->ops->get_max(fan_cpu_main);
+
+ wf_cpu_pid_init(&wf_smu_cpu_fans->pid, &pid_param);
+
+ DBG("wf: CPU Fan control initialized.\n");
+ DBG(" ttarged=%d.%03d, tmax=%d.%03d, min=%d RPM, max=%d RPM\n",
+ FIX32TOPRINT(pid_param.ttarget), FIX32TOPRINT(pid_param.tmax),
+ pid_param.min, pid_param.max);
+
+ return;
+
+ fail:
+ printk(KERN_WARNING "windfarm: CPU fan config not found\n"
+ "for this machine model, max fan speed\n");
+
+ if (cpufreq_clamp)
+ wf_control_set_max(cpufreq_clamp);
+ if (fan_cpu_main)
+ wf_control_set_max(fan_cpu_main);
+}
+
+static void wf_smu_cpu_fans_tick(struct wf_smu_cpu_fans_state *st)
+{
+ s32 new_setpoint, temp, power, systarget;
+ int rc;
+
+ if (--st->ticks != 0) {
+ if (wf_smu_readjust)
+ goto readjust;
+ return;
+ }
+ st->ticks = WF_SMU_CPU_FANS_INTERVAL;
+
+ rc = sensor_cpu_temp->ops->get_value(sensor_cpu_temp, &temp);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: CPU temp sensor error %d\n",
+ rc);
+ wf_smu_failure_state |= FAILURE_SENSOR;
+ return;
+ }
+
+ rc = sensor_cpu_power->ops->get_value(sensor_cpu_power, &power);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: CPU power sensor error %d\n",
+ rc);
+ wf_smu_failure_state |= FAILURE_SENSOR;
+ return;
+ }
+
+ DBG("wf_smu: CPU Fans tick ! CPU temp: %d.%03d, power: %d.%03d\n",
+ FIX32TOPRINT(temp), FIX32TOPRINT(power));
+
+#ifdef HACKED_OVERTEMP
+ if (temp > 0x4a0000)
+ wf_smu_failure_state |= FAILURE_OVERTEMP;
+#else
+ if (temp > st->pid.param.tmax)
+ wf_smu_failure_state |= FAILURE_OVERTEMP;
+#endif
+ new_setpoint = wf_cpu_pid_run(&st->pid, power, temp);
+
+ DBG("wf_smu: new_setpoint: %d RPM\n", (int)new_setpoint);
+
+ systarget = wf_smu_sys_fans ? wf_smu_sys_fans->pid.target : 0;
+ systarget = ((((s64)systarget) * (s64)st->scale) >> 12)
+ + st->offset;
+ new_setpoint = max(new_setpoint, systarget);
+ new_setpoint = max(new_setpoint, st->pid.param.min);
+ new_setpoint = min(new_setpoint, st->pid.param.max);
+
+ DBG("wf_smu: adjusted setpoint: %d RPM\n", (int)new_setpoint);
+
+ if (st->cpu_setpoint == new_setpoint)
+ return;
+ st->cpu_setpoint = new_setpoint;
+ readjust:
+ if (fan_cpu_main && wf_smu_failure_state == 0) {
+ rc = fan_cpu_main->ops->set_value(fan_cpu_main,
+ st->cpu_setpoint);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: CPU main fan"
+ " error %d\n", rc);
+ wf_smu_failure_state |= FAILURE_FAN;
+ }
+ }
+}
+
+
+/*
+ * ****** Attributes ******
+ *
+ */
+
+#define BUILD_SHOW_FUNC_FIX(name, data) \
+static ssize_t show_##name(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ ssize_t r; \
+ s32 val = 0; \
+ data->ops->get_value(data, &val); \
+ r = sprintf(buf, "%d.%03d", FIX32TOPRINT(val)); \
+ return r; \
+} \
+static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);
+
+
+#define BUILD_SHOW_FUNC_INT(name, data) \
+static ssize_t show_##name(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ s32 val = 0; \
+ data->ops->get_value(data, &val); \
+ return sprintf(buf, "%d", val); \
+} \
+static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);
+
+BUILD_SHOW_FUNC_INT(cpu_fan, fan_cpu_main);
+BUILD_SHOW_FUNC_INT(sys_fan, fan_system);
+BUILD_SHOW_FUNC_INT(hd_fan, fan_hd);
+
+BUILD_SHOW_FUNC_FIX(cpu_temp, sensor_cpu_temp);
+BUILD_SHOW_FUNC_FIX(cpu_power, sensor_cpu_power);
+BUILD_SHOW_FUNC_FIX(hd_temp, sensor_hd_temp);
+
+/*
+ * ****** Setup / Init / Misc ... ******
+ *
+ */
+
+static void wf_smu_tick(void)
+{
+ unsigned int last_failure = wf_smu_failure_state;
+ unsigned int new_failure;
+
+ if (!wf_smu_started) {
+ DBG("wf: creating control loops !\n");
+ wf_smu_create_sys_fans();
+ wf_smu_create_cpu_fans();
+ wf_smu_started = 1;
+ }
+
+ /* Skipping ticks */
+ if (wf_smu_skipping && --wf_smu_skipping)
+ return;
+
+ wf_smu_failure_state = 0;
+ if (wf_smu_sys_fans)
+ wf_smu_sys_fans_tick(wf_smu_sys_fans);
+ if (wf_smu_cpu_fans)
+ wf_smu_cpu_fans_tick(wf_smu_cpu_fans);
+
+ wf_smu_readjust = 0;
+ new_failure = wf_smu_failure_state & ~last_failure;
+
+ /* If entering failure mode, clamp cpufreq and ramp all
+ * fans to full speed.
+ */
+ if (wf_smu_failure_state && !last_failure) {
+ if (cpufreq_clamp)
+ wf_control_set_max(cpufreq_clamp);
+ if (fan_system)
+ wf_control_set_max(fan_system);
+ if (fan_cpu_main)
+ wf_control_set_max(fan_cpu_main);
+ if (fan_hd)
+ wf_control_set_max(fan_hd);
+ }
+
+ /* If leaving failure mode, unclamp cpufreq and readjust
+ * all fans on next iteration
+ */
+ if (!wf_smu_failure_state && last_failure) {
+ if (cpufreq_clamp)
+ wf_control_set_min(cpufreq_clamp);
+ wf_smu_readjust = 1;
+ }
+
+ /* Overtemp condition detected, notify and start skipping a couple
+ * ticks to let the temperature go down
+ */
+ if (new_failure & FAILURE_OVERTEMP) {
+ wf_set_overtemp();
+ wf_smu_skipping = 2;
+ }
+
+ /* We only clear the overtemp condition if overtemp is cleared
+ * _and_ no other failure is present. Since a sensor error will
+ * clear the overtemp condition (can't measure temperature) at
+ * the control loop levels, but we don't want to keep it clear
+ * here in this case
+ */
+ if (new_failure == 0 && last_failure & FAILURE_OVERTEMP)
+ wf_clear_overtemp();
+}
+
+static void wf_smu_new_control(struct wf_control *ct)
+{
+ if (wf_smu_all_controls_ok)
+ return;
+
+ if (fan_cpu_main == NULL && !strcmp(ct->name, "cpu-fan")) {
+ if (wf_get_control(ct) == 0) {
+ fan_cpu_main = ct;
+ device_create_file(wf_smu_dev, &dev_attr_cpu_fan);
+ }
+ }
+
+ if (fan_system == NULL && !strcmp(ct->name, "system-fan")) {
+ if (wf_get_control(ct) == 0) {
+ fan_system = ct;
+ device_create_file(wf_smu_dev, &dev_attr_sys_fan);
+ }
+ }
+
+ if (cpufreq_clamp == NULL && !strcmp(ct->name, "cpufreq-clamp")) {
+ if (wf_get_control(ct) == 0)
+ cpufreq_clamp = ct;
+ }
+
+ /* Darwin property list says the HD fan is only for model ID
+ * 0, 1, 2 and 3
+ */
+
+ if (wf_smu_mach_model > 3) {
+ if (fan_system && fan_cpu_main && cpufreq_clamp)
+ wf_smu_all_controls_ok = 1;
+ return;
+ }
+
+ if (fan_hd == NULL && !strcmp(ct->name, "drive-bay-fan")) {
+ if (wf_get_control(ct) == 0) {
+ fan_hd = ct;
+ device_create_file(wf_smu_dev, &dev_attr_hd_fan);
+ }
+ }
+
+ if (fan_system && fan_hd && fan_cpu_main && cpufreq_clamp)
+ wf_smu_all_controls_ok = 1;
+}
+
+static void wf_smu_new_sensor(struct wf_sensor *sr)
+{
+ if (wf_smu_all_sensors_ok)
+ return;
+
+ if (sensor_cpu_power == NULL && !strcmp(sr->name, "cpu-power")) {
+ if (wf_get_sensor(sr) == 0) {
+ sensor_cpu_power = sr;
+ device_create_file(wf_smu_dev, &dev_attr_cpu_power);
+ }
+ }
+
+ if (sensor_cpu_temp == NULL && !strcmp(sr->name, "cpu-temp")) {
+ if (wf_get_sensor(sr) == 0) {
+ sensor_cpu_temp = sr;
+ device_create_file(wf_smu_dev, &dev_attr_cpu_temp);
+ }
+ }
+
+ if (sensor_hd_temp == NULL && !strcmp(sr->name, "hd-temp")) {
+ if (wf_get_sensor(sr) == 0) {
+ sensor_hd_temp = sr;
+ device_create_file(wf_smu_dev, &dev_attr_hd_temp);
+ }
+ }
+
+ if (sensor_cpu_power && sensor_cpu_temp && sensor_hd_temp)
+ wf_smu_all_sensors_ok = 1;
+}
+
+
+static int wf_smu_notify(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ switch(event) {
+ case WF_EVENT_NEW_CONTROL:
+ DBG("wf: new control %s detected\n",
+ ((struct wf_control *)data)->name);
+ wf_smu_new_control(data);
+ wf_smu_readjust = 1;
+ break;
+ case WF_EVENT_NEW_SENSOR:
+ DBG("wf: new sensor %s detected\n",
+ ((struct wf_sensor *)data)->name);
+ wf_smu_new_sensor(data);
+ break;
+ case WF_EVENT_TICK:
+ if (wf_smu_all_controls_ok && wf_smu_all_sensors_ok)
+ wf_smu_tick();
+ }
+
+ return 0;
+}
+
+static struct notifier_block wf_smu_events = {
+ .notifier_call = wf_smu_notify,
+};
+
+static int wf_init_pm(void)
+{
+ struct smu_sdbp_header *hdr;
+
+ hdr = smu_get_sdb_partition(SMU_SDB_SENSORTREE_ID, NULL);
+ if (hdr != 0) {
+ struct smu_sdbp_sensortree *st =
+ (struct smu_sdbp_sensortree *)&hdr[1];
+ wf_smu_mach_model = st->model_id;
+ }
+
+ printk(KERN_INFO "windfarm: Initializing for iMacG5 model ID %d\n",
+ wf_smu_mach_model);
+
+ return 0;
+}
+
+static int wf_smu_probe(struct device *ddev)
+{
+ wf_smu_dev = ddev;
+
+ wf_register_client(&wf_smu_events);
+
+ return 0;
+}
+
+static int wf_smu_remove(struct device *ddev)
+{
+ wf_unregister_client(&wf_smu_events);
+
+ /* XXX We don't have yet a guarantee that our callback isn't
+ * in progress when returning from wf_unregister_client, so
+ * we add an arbitrary delay. I'll have to fix that in the core
+ */
+ msleep(1000);
+
+ /* Release all sensors */
+ /* One more crappy race: I don't think we have any guarantee here
+ * that the attribute callback won't race with the sensor beeing
+ * disposed of, and I'm not 100% certain what best way to deal
+ * with that except by adding locks all over... I'll do that
+ * eventually but heh, who ever rmmod this module anyway ?
+ */
+ if (sensor_cpu_power) {
+ device_remove_file(wf_smu_dev, &dev_attr_cpu_power);
+ wf_put_sensor(sensor_cpu_power);
+ }
+ if (sensor_cpu_temp) {
+ device_remove_file(wf_smu_dev, &dev_attr_cpu_temp);
+ wf_put_sensor(sensor_cpu_temp);
+ }
+ if (sensor_hd_temp) {
+ device_remove_file(wf_smu_dev, &dev_attr_hd_temp);
+ wf_put_sensor(sensor_hd_temp);
+ }
+
+ /* Release all controls */
+ if (fan_cpu_main) {
+ device_remove_file(wf_smu_dev, &dev_attr_cpu_fan);
+ wf_put_control(fan_cpu_main);
+ }
+ if (fan_hd) {
+ device_remove_file(wf_smu_dev, &dev_attr_hd_fan);
+ wf_put_control(fan_hd);
+ }
+ if (fan_system) {
+ device_remove_file(wf_smu_dev, &dev_attr_sys_fan);
+ wf_put_control(fan_system);
+ }
+ if (cpufreq_clamp)
+ wf_put_control(cpufreq_clamp);
+
+ /* Destroy control loops state structures */
+ if (wf_smu_sys_fans)
+ kfree(wf_smu_sys_fans);
+ if (wf_smu_cpu_fans)
+ kfree(wf_smu_cpu_fans);
+
+ wf_smu_dev = NULL;
+
+ return 0;
+}
+
+static struct device_driver wf_smu_driver = {
+ .name = "windfarm",
+ .bus = &platform_bus_type,
+ .probe = wf_smu_probe,
+ .remove = wf_smu_remove,
+};
+
+
+static int __init wf_smu_init(void)
+{
+ int rc = -ENODEV;
+
+ if (machine_is_compatible("PowerMac8,1") ||
+ machine_is_compatible("PowerMac8,2"))
+ rc = wf_init_pm();
+
+ if (rc == 0) {
+#ifdef MODULE
+ request_module("windfarm_smu_controls");
+ request_module("windfarm_smu_sensors");
+ request_module("windfarm_lm75_sensor");
+
+#endif /* MODULE */
+ driver_register(&wf_smu_driver);
+ }
+
+ return rc;
+}
+
+static void __exit wf_smu_exit(void)
+{
+
+ driver_unregister(&wf_smu_driver);
+}
+
+
+module_init(wf_smu_init);
+module_exit(wf_smu_exit);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("Thermal control logic for iMac G5");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/macintosh/windfarm_pm91.c b/drivers/macintosh/windfarm_pm91.c
new file mode 100644
index 000000000000..43243cf7410b
--- /dev/null
+++ b/drivers/macintosh/windfarm_pm91.c
@@ -0,0 +1,814 @@
+/*
+ * Windfarm PowerMac thermal control. SMU based 1 CPU desktop control loops
+ *
+ * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Released under the term of the GNU GPL v2.
+ *
+ * The algorithm used is the PID control algorithm, used the same
+ * way the published Darwin code does, using the same values that
+ * are present in the Darwin 8.2 snapshot property lists (note however
+ * that none of the code has been re-used, it's a complete re-implementation
+ *
+ * The various control loops found in Darwin config file are:
+ *
+ * PowerMac9,1
+ * ===========
+ *
+ * Has 3 control loops: CPU fans is similar to PowerMac8,1 (though it doesn't
+ * try to play with other control loops fans). Drive bay is rather basic PID
+ * with one sensor and one fan. Slots area is a bit different as the Darwin
+ * driver is supposed to be capable of working in a special "AGP" mode which
+ * involves the presence of an AGP sensor and an AGP fan (possibly on the
+ * AGP card itself). I can't deal with that special mode as I don't have
+ * access to those additional sensor/fans for now (though ultimately, it would
+ * be possible to add sensor objects for them) so I'm only implementing the
+ * basic PCI slot control loop
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/kmod.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/sections.h>
+#include <asm/smu.h>
+
+#include "windfarm.h"
+#include "windfarm_pid.h"
+
+#define VERSION "0.4"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(args...) printk(args)
+#else
+#define DBG(args...) do { } while(0)
+#endif
+
+/* define this to force CPU overtemp to 74 degree, useful for testing
+ * the overtemp code
+ */
+#undef HACKED_OVERTEMP
+
+static struct device *wf_smu_dev;
+
+/* Controls & sensors */
+static struct wf_sensor *sensor_cpu_power;
+static struct wf_sensor *sensor_cpu_temp;
+static struct wf_sensor *sensor_hd_temp;
+static struct wf_sensor *sensor_slots_power;
+static struct wf_control *fan_cpu_main;
+static struct wf_control *fan_cpu_second;
+static struct wf_control *fan_cpu_third;
+static struct wf_control *fan_hd;
+static struct wf_control *fan_slots;
+static struct wf_control *cpufreq_clamp;
+
+/* Set to kick the control loop into life */
+static int wf_smu_all_controls_ok, wf_smu_all_sensors_ok, wf_smu_started;
+
+/* Failure handling.. could be nicer */
+#define FAILURE_FAN 0x01
+#define FAILURE_SENSOR 0x02
+#define FAILURE_OVERTEMP 0x04
+
+static unsigned int wf_smu_failure_state;
+static int wf_smu_readjust, wf_smu_skipping;
+
+/*
+ * ****** CPU Fans Control Loop ******
+ *
+ */
+
+
+#define WF_SMU_CPU_FANS_INTERVAL 1
+#define WF_SMU_CPU_FANS_MAX_HISTORY 16
+
+/* State data used by the cpu fans control loop
+ */
+struct wf_smu_cpu_fans_state {
+ int ticks;
+ s32 cpu_setpoint;
+ struct wf_cpu_pid_state pid;
+};
+
+static struct wf_smu_cpu_fans_state *wf_smu_cpu_fans;
+
+
+
+/*
+ * ****** Drive Fan Control Loop ******
+ *
+ */
+
+struct wf_smu_drive_fans_state {
+ int ticks;
+ s32 setpoint;
+ struct wf_pid_state pid;
+};
+
+static struct wf_smu_drive_fans_state *wf_smu_drive_fans;
+
+/*
+ * ****** Slots Fan Control Loop ******
+ *
+ */
+
+struct wf_smu_slots_fans_state {
+ int ticks;
+ s32 setpoint;
+ struct wf_pid_state pid;
+};
+
+static struct wf_smu_slots_fans_state *wf_smu_slots_fans;
+
+/*
+ * ***** Implementation *****
+ *
+ */
+
+
+static void wf_smu_create_cpu_fans(void)
+{
+ struct wf_cpu_pid_param pid_param;
+ struct smu_sdbp_header *hdr;
+ struct smu_sdbp_cpupiddata *piddata;
+ struct smu_sdbp_fvt *fvt;
+ s32 tmax, tdelta, maxpow, powadj;
+
+ /* First, locate the PID params in SMU SBD */
+ hdr = smu_get_sdb_partition(SMU_SDB_CPUPIDDATA_ID, NULL);
+ if (hdr == 0) {
+ printk(KERN_WARNING "windfarm: CPU PID fan config not found "
+ "max fan speed\n");
+ goto fail;
+ }
+ piddata = (struct smu_sdbp_cpupiddata *)&hdr[1];
+
+ /* Get the FVT params for operating point 0 (the only supported one
+ * for now) in order to get tmax
+ */
+ hdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
+ if (hdr) {
+ fvt = (struct smu_sdbp_fvt *)&hdr[1];
+ tmax = ((s32)fvt->maxtemp) << 16;
+ } else
+ tmax = 0x5e0000; /* 94 degree default */
+
+ /* Alloc & initialize state */
+ wf_smu_cpu_fans = kmalloc(sizeof(struct wf_smu_cpu_fans_state),
+ GFP_KERNEL);
+ if (wf_smu_cpu_fans == NULL)
+ goto fail;
+ wf_smu_cpu_fans->ticks = 1;
+
+ /* Fill PID params */
+ pid_param.interval = WF_SMU_CPU_FANS_INTERVAL;
+ pid_param.history_len = piddata->history_len;
+ if (pid_param.history_len > WF_CPU_PID_MAX_HISTORY) {
+ printk(KERN_WARNING "windfarm: History size overflow on "
+ "CPU control loop (%d)\n", piddata->history_len);
+ pid_param.history_len = WF_CPU_PID_MAX_HISTORY;
+ }
+ pid_param.gd = piddata->gd;
+ pid_param.gp = piddata->gp;
+ pid_param.gr = piddata->gr / pid_param.history_len;
+
+ tdelta = ((s32)piddata->target_temp_delta) << 16;
+ maxpow = ((s32)piddata->max_power) << 16;
+ powadj = ((s32)piddata->power_adj) << 16;
+
+ pid_param.tmax = tmax;
+ pid_param.ttarget = tmax - tdelta;
+ pid_param.pmaxadj = maxpow - powadj;
+
+ pid_param.min = fan_cpu_main->ops->get_min(fan_cpu_main);
+ pid_param.max = fan_cpu_main->ops->get_max(fan_cpu_main);
+
+ wf_cpu_pid_init(&wf_smu_cpu_fans->pid, &pid_param);
+
+ DBG("wf: CPU Fan control initialized.\n");
+ DBG(" ttarged=%d.%03d, tmax=%d.%03d, min=%d RPM, max=%d RPM\n",
+ FIX32TOPRINT(pid_param.ttarget), FIX32TOPRINT(pid_param.tmax),
+ pid_param.min, pid_param.max);
+
+ return;
+
+ fail:
+ printk(KERN_WARNING "windfarm: CPU fan config not found\n"
+ "for this machine model, max fan speed\n");
+
+ if (cpufreq_clamp)
+ wf_control_set_max(cpufreq_clamp);
+ if (fan_cpu_main)
+ wf_control_set_max(fan_cpu_main);
+}
+
+static void wf_smu_cpu_fans_tick(struct wf_smu_cpu_fans_state *st)
+{
+ s32 new_setpoint, temp, power;
+ int rc;
+
+ if (--st->ticks != 0) {
+ if (wf_smu_readjust)
+ goto readjust;
+ return;
+ }
+ st->ticks = WF_SMU_CPU_FANS_INTERVAL;
+
+ rc = sensor_cpu_temp->ops->get_value(sensor_cpu_temp, &temp);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: CPU temp sensor error %d\n",
+ rc);
+ wf_smu_failure_state |= FAILURE_SENSOR;
+ return;
+ }
+
+ rc = sensor_cpu_power->ops->get_value(sensor_cpu_power, &power);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: CPU power sensor error %d\n",
+ rc);
+ wf_smu_failure_state |= FAILURE_SENSOR;
+ return;
+ }
+
+ DBG("wf_smu: CPU Fans tick ! CPU temp: %d.%03d, power: %d.%03d\n",
+ FIX32TOPRINT(temp), FIX32TOPRINT(power));
+
+#ifdef HACKED_OVERTEMP
+ if (temp > 0x4a0000)
+ wf_smu_failure_state |= FAILURE_OVERTEMP;
+#else
+ if (temp > st->pid.param.tmax)
+ wf_smu_failure_state |= FAILURE_OVERTEMP;
+#endif
+ new_setpoint = wf_cpu_pid_run(&st->pid, power, temp);
+
+ DBG("wf_smu: new_setpoint: %d RPM\n", (int)new_setpoint);
+
+ if (st->cpu_setpoint == new_setpoint)
+ return;
+ st->cpu_setpoint = new_setpoint;
+ readjust:
+ if (fan_cpu_main && wf_smu_failure_state == 0) {
+ rc = fan_cpu_main->ops->set_value(fan_cpu_main,
+ st->cpu_setpoint);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: CPU main fan"
+ " error %d\n", rc);
+ wf_smu_failure_state |= FAILURE_FAN;
+ }
+ }
+ if (fan_cpu_second && wf_smu_failure_state == 0) {
+ rc = fan_cpu_second->ops->set_value(fan_cpu_second,
+ st->cpu_setpoint);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: CPU second fan"
+ " error %d\n", rc);
+ wf_smu_failure_state |= FAILURE_FAN;
+ }
+ }
+ if (fan_cpu_third && wf_smu_failure_state == 0) {
+ rc = fan_cpu_main->ops->set_value(fan_cpu_third,
+ st->cpu_setpoint);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: CPU third fan"
+ " error %d\n", rc);
+ wf_smu_failure_state |= FAILURE_FAN;
+ }
+ }
+}
+
+static void wf_smu_create_drive_fans(void)
+{
+ struct wf_pid_param param = {
+ .interval = 5,
+ .history_len = 2,
+ .gd = 0x01e00000,
+ .gp = 0x00500000,
+ .gr = 0x00000000,
+ .itarget = 0x00200000,
+ };
+
+ /* Alloc & initialize state */
+ wf_smu_drive_fans = kmalloc(sizeof(struct wf_smu_drive_fans_state),
+ GFP_KERNEL);
+ if (wf_smu_drive_fans == NULL) {
+ printk(KERN_WARNING "windfarm: Memory allocation error"
+ " max fan speed\n");
+ goto fail;
+ }
+ wf_smu_drive_fans->ticks = 1;
+
+ /* Fill PID params */
+ param.additive = (fan_hd->type == WF_CONTROL_RPM_FAN);
+ param.min = fan_hd->ops->get_min(fan_hd);
+ param.max = fan_hd->ops->get_max(fan_hd);
+ wf_pid_init(&wf_smu_drive_fans->pid, &param);
+
+ DBG("wf: Drive Fan control initialized.\n");
+ DBG(" itarged=%d.%03d, min=%d RPM, max=%d RPM\n",
+ FIX32TOPRINT(param.itarget), param.min, param.max);
+ return;
+
+ fail:
+ if (fan_hd)
+ wf_control_set_max(fan_hd);
+}
+
+static void wf_smu_drive_fans_tick(struct wf_smu_drive_fans_state *st)
+{
+ s32 new_setpoint, temp;
+ int rc;
+
+ if (--st->ticks != 0) {
+ if (wf_smu_readjust)
+ goto readjust;
+ return;
+ }
+ st->ticks = st->pid.param.interval;
+
+ rc = sensor_hd_temp->ops->get_value(sensor_hd_temp, &temp);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: HD temp sensor error %d\n",
+ rc);
+ wf_smu_failure_state |= FAILURE_SENSOR;
+ return;
+ }
+
+ DBG("wf_smu: Drive Fans tick ! HD temp: %d.%03d\n",
+ FIX32TOPRINT(temp));
+
+ if (temp > (st->pid.param.itarget + 0x50000))
+ wf_smu_failure_state |= FAILURE_OVERTEMP;
+
+ new_setpoint = wf_pid_run(&st->pid, temp);
+
+ DBG("wf_smu: new_setpoint: %d\n", (int)new_setpoint);
+
+ if (st->setpoint == new_setpoint)
+ return;
+ st->setpoint = new_setpoint;
+ readjust:
+ if (fan_hd && wf_smu_failure_state == 0) {
+ rc = fan_hd->ops->set_value(fan_hd, st->setpoint);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: HD fan error %d\n",
+ rc);
+ wf_smu_failure_state |= FAILURE_FAN;
+ }
+ }
+}
+
+static void wf_smu_create_slots_fans(void)
+{
+ struct wf_pid_param param = {
+ .interval = 1,
+ .history_len = 8,
+ .gd = 0x00000000,
+ .gp = 0x00000000,
+ .gr = 0x00020000,
+ .itarget = 0x00000000
+ };
+
+ /* Alloc & initialize state */
+ wf_smu_slots_fans = kmalloc(sizeof(struct wf_smu_slots_fans_state),
+ GFP_KERNEL);
+ if (wf_smu_slots_fans == NULL) {
+ printk(KERN_WARNING "windfarm: Memory allocation error"
+ " max fan speed\n");
+ goto fail;
+ }
+ wf_smu_slots_fans->ticks = 1;
+
+ /* Fill PID params */
+ param.additive = (fan_slots->type == WF_CONTROL_RPM_FAN);
+ param.min = fan_slots->ops->get_min(fan_slots);
+ param.max = fan_slots->ops->get_max(fan_slots);
+ wf_pid_init(&wf_smu_slots_fans->pid, &param);
+
+ DBG("wf: Slots Fan control initialized.\n");
+ DBG(" itarged=%d.%03d, min=%d RPM, max=%d RPM\n",
+ FIX32TOPRINT(param.itarget), param.min, param.max);
+ return;
+
+ fail:
+ if (fan_slots)
+ wf_control_set_max(fan_slots);
+}
+
+static void wf_smu_slots_fans_tick(struct wf_smu_slots_fans_state *st)
+{
+ s32 new_setpoint, power;
+ int rc;
+
+ if (--st->ticks != 0) {
+ if (wf_smu_readjust)
+ goto readjust;
+ return;
+ }
+ st->ticks = st->pid.param.interval;
+
+ rc = sensor_slots_power->ops->get_value(sensor_slots_power, &power);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: Slots power sensor error %d\n",
+ rc);
+ wf_smu_failure_state |= FAILURE_SENSOR;
+ return;
+ }
+
+ DBG("wf_smu: Slots Fans tick ! Slots power: %d.%03d\n",
+ FIX32TOPRINT(power));
+
+#if 0 /* Check what makes a good overtemp condition */
+ if (power > (st->pid.param.itarget + 0x50000))
+ wf_smu_failure_state |= FAILURE_OVERTEMP;
+#endif
+
+ new_setpoint = wf_pid_run(&st->pid, power);
+
+ DBG("wf_smu: new_setpoint: %d\n", (int)new_setpoint);
+
+ if (st->setpoint == new_setpoint)
+ return;
+ st->setpoint = new_setpoint;
+ readjust:
+ if (fan_slots && wf_smu_failure_state == 0) {
+ rc = fan_slots->ops->set_value(fan_slots, st->setpoint);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: Slots fan error %d\n",
+ rc);
+ wf_smu_failure_state |= FAILURE_FAN;
+ }
+ }
+}
+
+
+/*
+ * ****** Attributes ******
+ *
+ */
+
+#define BUILD_SHOW_FUNC_FIX(name, data) \
+static ssize_t show_##name(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ ssize_t r; \
+ s32 val = 0; \
+ data->ops->get_value(data, &val); \
+ r = sprintf(buf, "%d.%03d", FIX32TOPRINT(val)); \
+ return r; \
+} \
+static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);
+
+
+#define BUILD_SHOW_FUNC_INT(name, data) \
+static ssize_t show_##name(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ s32 val = 0; \
+ data->ops->get_value(data, &val); \
+ return sprintf(buf, "%d", val); \
+} \
+static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);
+
+BUILD_SHOW_FUNC_INT(cpu_fan, fan_cpu_main);
+BUILD_SHOW_FUNC_INT(hd_fan, fan_hd);
+BUILD_SHOW_FUNC_INT(slots_fan, fan_slots);
+
+BUILD_SHOW_FUNC_FIX(cpu_temp, sensor_cpu_temp);
+BUILD_SHOW_FUNC_FIX(cpu_power, sensor_cpu_power);
+BUILD_SHOW_FUNC_FIX(hd_temp, sensor_hd_temp);
+BUILD_SHOW_FUNC_FIX(slots_power, sensor_slots_power);
+
+/*
+ * ****** Setup / Init / Misc ... ******
+ *
+ */
+
+static void wf_smu_tick(void)
+{
+ unsigned int last_failure = wf_smu_failure_state;
+ unsigned int new_failure;
+
+ if (!wf_smu_started) {
+ DBG("wf: creating control loops !\n");
+ wf_smu_create_drive_fans();
+ wf_smu_create_slots_fans();
+ wf_smu_create_cpu_fans();
+ wf_smu_started = 1;
+ }
+
+ /* Skipping ticks */
+ if (wf_smu_skipping && --wf_smu_skipping)
+ return;
+
+ wf_smu_failure_state = 0;
+ if (wf_smu_drive_fans)
+ wf_smu_drive_fans_tick(wf_smu_drive_fans);
+ if (wf_smu_slots_fans)
+ wf_smu_slots_fans_tick(wf_smu_slots_fans);
+ if (wf_smu_cpu_fans)
+ wf_smu_cpu_fans_tick(wf_smu_cpu_fans);
+
+ wf_smu_readjust = 0;
+ new_failure = wf_smu_failure_state & ~last_failure;
+
+ /* If entering failure mode, clamp cpufreq and ramp all
+ * fans to full speed.
+ */
+ if (wf_smu_failure_state && !last_failure) {
+ if (cpufreq_clamp)
+ wf_control_set_max(cpufreq_clamp);
+ if (fan_cpu_main)
+ wf_control_set_max(fan_cpu_main);
+ if (fan_cpu_second)
+ wf_control_set_max(fan_cpu_second);
+ if (fan_cpu_third)
+ wf_control_set_max(fan_cpu_third);
+ if (fan_hd)
+ wf_control_set_max(fan_hd);
+ if (fan_slots)
+ wf_control_set_max(fan_slots);
+ }
+
+ /* If leaving failure mode, unclamp cpufreq and readjust
+ * all fans on next iteration
+ */
+ if (!wf_smu_failure_state && last_failure) {
+ if (cpufreq_clamp)
+ wf_control_set_min(cpufreq_clamp);
+ wf_smu_readjust = 1;
+ }
+
+ /* Overtemp condition detected, notify and start skipping a couple
+ * ticks to let the temperature go down
+ */
+ if (new_failure & FAILURE_OVERTEMP) {
+ wf_set_overtemp();
+ wf_smu_skipping = 2;
+ }
+
+ /* We only clear the overtemp condition if overtemp is cleared
+ * _and_ no other failure is present. Since a sensor error will
+ * clear the overtemp condition (can't measure temperature) at
+ * the control loop levels, but we don't want to keep it clear
+ * here in this case
+ */
+ if (new_failure == 0 && last_failure & FAILURE_OVERTEMP)
+ wf_clear_overtemp();
+}
+
+
+static void wf_smu_new_control(struct wf_control *ct)
+{
+ if (wf_smu_all_controls_ok)
+ return;
+
+ if (fan_cpu_main == NULL && !strcmp(ct->name, "cpu-rear-fan-0")) {
+ if (wf_get_control(ct) == 0) {
+ fan_cpu_main = ct;
+ device_create_file(wf_smu_dev, &dev_attr_cpu_fan);
+ }
+ }
+
+ if (fan_cpu_second == NULL && !strcmp(ct->name, "cpu-rear-fan-1")) {
+ if (wf_get_control(ct) == 0)
+ fan_cpu_second = ct;
+ }
+
+ if (fan_cpu_third == NULL && !strcmp(ct->name, "cpu-front-fan-0")) {
+ if (wf_get_control(ct) == 0)
+ fan_cpu_third = ct;
+ }
+
+ if (cpufreq_clamp == NULL && !strcmp(ct->name, "cpufreq-clamp")) {
+ if (wf_get_control(ct) == 0)
+ cpufreq_clamp = ct;
+ }
+
+ if (fan_hd == NULL && !strcmp(ct->name, "drive-bay-fan")) {
+ if (wf_get_control(ct) == 0) {
+ fan_hd = ct;
+ device_create_file(wf_smu_dev, &dev_attr_hd_fan);
+ }
+ }
+
+ if (fan_slots == NULL && !strcmp(ct->name, "slots-fan")) {
+ if (wf_get_control(ct) == 0) {
+ fan_slots = ct;
+ device_create_file(wf_smu_dev, &dev_attr_slots_fan);
+ }
+ }
+
+ if (fan_cpu_main && (fan_cpu_second || fan_cpu_third) && fan_hd &&
+ fan_slots && cpufreq_clamp)
+ wf_smu_all_controls_ok = 1;
+}
+
+static void wf_smu_new_sensor(struct wf_sensor *sr)
+{
+ if (wf_smu_all_sensors_ok)
+ return;
+
+ if (sensor_cpu_power == NULL && !strcmp(sr->name, "cpu-power")) {
+ if (wf_get_sensor(sr) == 0) {
+ sensor_cpu_power = sr;
+ device_create_file(wf_smu_dev, &dev_attr_cpu_power);
+ }
+ }
+
+ if (sensor_cpu_temp == NULL && !strcmp(sr->name, "cpu-temp")) {
+ if (wf_get_sensor(sr) == 0) {
+ sensor_cpu_temp = sr;
+ device_create_file(wf_smu_dev, &dev_attr_cpu_temp);
+ }
+ }
+
+ if (sensor_hd_temp == NULL && !strcmp(sr->name, "hd-temp")) {
+ if (wf_get_sensor(sr) == 0) {
+ sensor_hd_temp = sr;
+ device_create_file(wf_smu_dev, &dev_attr_hd_temp);
+ }
+ }
+
+ if (sensor_slots_power == NULL && !strcmp(sr->name, "slots-power")) {
+ if (wf_get_sensor(sr) == 0) {
+ sensor_slots_power = sr;
+ device_create_file(wf_smu_dev, &dev_attr_slots_power);
+ }
+ }
+
+ if (sensor_cpu_power && sensor_cpu_temp &&
+ sensor_hd_temp && sensor_slots_power)
+ wf_smu_all_sensors_ok = 1;
+}
+
+
+static int wf_smu_notify(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ switch(event) {
+ case WF_EVENT_NEW_CONTROL:
+ DBG("wf: new control %s detected\n",
+ ((struct wf_control *)data)->name);
+ wf_smu_new_control(data);
+ wf_smu_readjust = 1;
+ break;
+ case WF_EVENT_NEW_SENSOR:
+ DBG("wf: new sensor %s detected\n",
+ ((struct wf_sensor *)data)->name);
+ wf_smu_new_sensor(data);
+ break;
+ case WF_EVENT_TICK:
+ if (wf_smu_all_controls_ok && wf_smu_all_sensors_ok)
+ wf_smu_tick();
+ }
+
+ return 0;
+}
+
+static struct notifier_block wf_smu_events = {
+ .notifier_call = wf_smu_notify,
+};
+
+static int wf_init_pm(void)
+{
+ printk(KERN_INFO "windfarm: Initializing for Desktop G5 model\n");
+
+ return 0;
+}
+
+static int wf_smu_probe(struct device *ddev)
+{
+ wf_smu_dev = ddev;
+
+ wf_register_client(&wf_smu_events);
+
+ return 0;
+}
+
+static int wf_smu_remove(struct device *ddev)
+{
+ wf_unregister_client(&wf_smu_events);
+
+ /* XXX We don't have yet a guarantee that our callback isn't
+ * in progress when returning from wf_unregister_client, so
+ * we add an arbitrary delay. I'll have to fix that in the core
+ */
+ msleep(1000);
+
+ /* Release all sensors */
+ /* One more crappy race: I don't think we have any guarantee here
+ * that the attribute callback won't race with the sensor beeing
+ * disposed of, and I'm not 100% certain what best way to deal
+ * with that except by adding locks all over... I'll do that
+ * eventually but heh, who ever rmmod this module anyway ?
+ */
+ if (sensor_cpu_power) {
+ device_remove_file(wf_smu_dev, &dev_attr_cpu_power);
+ wf_put_sensor(sensor_cpu_power);
+ }
+ if (sensor_cpu_temp) {
+ device_remove_file(wf_smu_dev, &dev_attr_cpu_temp);
+ wf_put_sensor(sensor_cpu_temp);
+ }
+ if (sensor_hd_temp) {
+ device_remove_file(wf_smu_dev, &dev_attr_hd_temp);
+ wf_put_sensor(sensor_hd_temp);
+ }
+ if (sensor_slots_power) {
+ device_remove_file(wf_smu_dev, &dev_attr_slots_power);
+ wf_put_sensor(sensor_slots_power);
+ }
+
+ /* Release all controls */
+ if (fan_cpu_main) {
+ device_remove_file(wf_smu_dev, &dev_attr_cpu_fan);
+ wf_put_control(fan_cpu_main);
+ }
+ if (fan_cpu_second)
+ wf_put_control(fan_cpu_second);
+ if (fan_cpu_third)
+ wf_put_control(fan_cpu_third);
+ if (fan_hd) {
+ device_remove_file(wf_smu_dev, &dev_attr_hd_fan);
+ wf_put_control(fan_hd);
+ }
+ if (fan_slots) {
+ device_remove_file(wf_smu_dev, &dev_attr_slots_fan);
+ wf_put_control(fan_slots);
+ }
+ if (cpufreq_clamp)
+ wf_put_control(cpufreq_clamp);
+
+ /* Destroy control loops state structures */
+ if (wf_smu_slots_fans)
+ kfree(wf_smu_cpu_fans);
+ if (wf_smu_drive_fans)
+ kfree(wf_smu_cpu_fans);
+ if (wf_smu_cpu_fans)
+ kfree(wf_smu_cpu_fans);
+
+ wf_smu_dev = NULL;
+
+ return 0;
+}
+
+static struct device_driver wf_smu_driver = {
+ .name = "windfarm",
+ .bus = &platform_bus_type,
+ .probe = wf_smu_probe,
+ .remove = wf_smu_remove,
+};
+
+
+static int __init wf_smu_init(void)
+{
+ int rc = -ENODEV;
+
+ if (machine_is_compatible("PowerMac9,1"))
+ rc = wf_init_pm();
+
+ if (rc == 0) {
+#ifdef MODULE
+ request_module("windfarm_smu_controls");
+ request_module("windfarm_smu_sensors");
+ request_module("windfarm_lm75_sensor");
+
+#endif /* MODULE */
+ driver_register(&wf_smu_driver);
+ }
+
+ return rc;
+}
+
+static void __exit wf_smu_exit(void)
+{
+
+ driver_unregister(&wf_smu_driver);
+}
+
+
+module_init(wf_smu_init);
+module_exit(wf_smu_exit);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("Thermal control logic for PowerMac9,1");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/macintosh/windfarm_smu_controls.c b/drivers/macintosh/windfarm_smu_controls.c
new file mode 100644
index 000000000000..2c3158c81ff2
--- /dev/null
+++ b/drivers/macintosh/windfarm_smu_controls.c
@@ -0,0 +1,282 @@
+/*
+ * Windfarm PowerMac thermal control. SMU based controls
+ *
+ * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Released under the term of the GNU GPL v2.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/sections.h>
+#include <asm/smu.h>
+
+#include "windfarm.h"
+
+#define VERSION "0.3"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(args...) printk(args)
+#else
+#define DBG(args...) do { } while(0)
+#endif
+
+/*
+ * SMU fans control object
+ */
+
+static LIST_HEAD(smu_fans);
+
+struct smu_fan_control {
+ struct list_head link;
+ int fan_type; /* 0 = rpm, 1 = pwm */
+ u32 reg; /* index in SMU */
+ s32 value; /* current value */
+ s32 min, max; /* min/max values */
+ struct wf_control ctrl;
+};
+#define to_smu_fan(c) container_of(c, struct smu_fan_control, ctrl)
+
+static int smu_set_fan(int pwm, u8 id, u16 value)
+{
+ struct smu_cmd cmd;
+ u8 buffer[16];
+ DECLARE_COMPLETION(comp);
+ int rc;
+
+ /* Fill SMU command structure */
+ cmd.cmd = SMU_CMD_FAN_COMMAND;
+ cmd.data_len = 14;
+ cmd.reply_len = 16;
+ cmd.data_buf = cmd.reply_buf = buffer;
+ cmd.status = 0;
+ cmd.done = smu_done_complete;
+ cmd.misc = &comp;
+
+ /* Fill argument buffer */
+ memset(buffer, 0, 16);
+ buffer[0] = pwm ? 0x10 : 0x00;
+ buffer[1] = 0x01 << id;
+ *((u16 *)&buffer[2 + id * 2]) = value;
+
+ rc = smu_queue_cmd(&cmd);
+ if (rc)
+ return rc;
+ wait_for_completion(&comp);
+ return cmd.status;
+}
+
+static void smu_fan_release(struct wf_control *ct)
+{
+ struct smu_fan_control *fct = to_smu_fan(ct);
+
+ kfree(fct);
+}
+
+static int smu_fan_set(struct wf_control *ct, s32 value)
+{
+ struct smu_fan_control *fct = to_smu_fan(ct);
+
+ if (value < fct->min)
+ value = fct->min;
+ if (value > fct->max)
+ value = fct->max;
+ fct->value = value;
+
+ return smu_set_fan(fct->fan_type, fct->reg, value);
+}
+
+static int smu_fan_get(struct wf_control *ct, s32 *value)
+{
+ struct smu_fan_control *fct = to_smu_fan(ct);
+ *value = fct->value; /* todo: read from SMU */
+ return 0;
+}
+
+static s32 smu_fan_min(struct wf_control *ct)
+{
+ struct smu_fan_control *fct = to_smu_fan(ct);
+ return fct->min;
+}
+
+static s32 smu_fan_max(struct wf_control *ct)
+{
+ struct smu_fan_control *fct = to_smu_fan(ct);
+ return fct->max;
+}
+
+static struct wf_control_ops smu_fan_ops = {
+ .set_value = smu_fan_set,
+ .get_value = smu_fan_get,
+ .get_min = smu_fan_min,
+ .get_max = smu_fan_max,
+ .release = smu_fan_release,
+ .owner = THIS_MODULE,
+};
+
+static struct smu_fan_control *smu_fan_create(struct device_node *node,
+ int pwm_fan)
+{
+ struct smu_fan_control *fct;
+ s32 *v; u32 *reg;
+ char *l;
+
+ fct = kmalloc(sizeof(struct smu_fan_control), GFP_KERNEL);
+ if (fct == NULL)
+ return NULL;
+ fct->ctrl.ops = &smu_fan_ops;
+ l = (char *)get_property(node, "location", NULL);
+ if (l == NULL)
+ goto fail;
+
+ fct->fan_type = pwm_fan;
+ fct->ctrl.type = pwm_fan ? WF_CONTROL_PWM_FAN : WF_CONTROL_RPM_FAN;
+
+ /* We use the name & location here the same way we do for SMU sensors,
+ * see the comment in windfarm_smu_sensors.c. The locations are a bit
+ * less consistent here between the iMac and the desktop models, but
+ * that is good enough for our needs for now at least.
+ *
+ * One problem though is that Apple seem to be inconsistent with case
+ * and the kernel doesn't have strcasecmp =P
+ */
+
+ fct->ctrl.name = NULL;
+
+ /* Names used on desktop models */
+ if (!strcmp(l, "Rear Fan 0") || !strcmp(l, "Rear Fan") ||
+ !strcmp(l, "Rear fan 0") || !strcmp(l, "Rear fan"))
+ fct->ctrl.name = "cpu-rear-fan-0";
+ else if (!strcmp(l, "Rear Fan 1") || !strcmp(l, "Rear fan 1"))
+ fct->ctrl.name = "cpu-rear-fan-1";
+ else if (!strcmp(l, "Front Fan 0") || !strcmp(l, "Front Fan") ||
+ !strcmp(l, "Front fan 0") || !strcmp(l, "Front fan"))
+ fct->ctrl.name = "cpu-front-fan-0";
+ else if (!strcmp(l, "Front Fan 1") || !strcmp(l, "Front fan 1"))
+ fct->ctrl.name = "cpu-front-fan-1";
+ else if (!strcmp(l, "Slots Fan") || !strcmp(l, "Slots fan"))
+ fct->ctrl.name = "slots-fan";
+ else if (!strcmp(l, "Drive Bay") || !strcmp(l, "Drive bay"))
+ fct->ctrl.name = "drive-bay-fan";
+
+ /* Names used on iMac models */
+ if (!strcmp(l, "System Fan") || !strcmp(l, "System fan"))
+ fct->ctrl.name = "system-fan";
+ else if (!strcmp(l, "CPU Fan") || !strcmp(l, "CPU fan"))
+ fct->ctrl.name = "cpu-fan";
+ else if (!strcmp(l, "Hard Drive") || !strcmp(l, "Hard drive"))
+ fct->ctrl.name = "drive-bay-fan";
+
+ /* Unrecognized fan, bail out */
+ if (fct->ctrl.name == NULL)
+ goto fail;
+
+ /* Get min & max values*/
+ v = (s32 *)get_property(node, "min-value", NULL);
+ if (v == NULL)
+ goto fail;
+ fct->min = *v;
+ v = (s32 *)get_property(node, "max-value", NULL);
+ if (v == NULL)
+ goto fail;
+ fct->max = *v;
+
+ /* Get "reg" value */
+ reg = (u32 *)get_property(node, "reg", NULL);
+ if (reg == NULL)
+ goto fail;
+ fct->reg = *reg;
+
+ if (wf_register_control(&fct->ctrl))
+ goto fail;
+
+ return fct;
+ fail:
+ kfree(fct);
+ return NULL;
+}
+
+
+static int __init smu_controls_init(void)
+{
+ struct device_node *smu, *fans, *fan;
+
+ if (!smu_present())
+ return -ENODEV;
+
+ smu = of_find_node_by_type(NULL, "smu");
+ if (smu == NULL)
+ return -ENODEV;
+
+ /* Look for RPM fans */
+ for (fans = NULL; (fans = of_get_next_child(smu, fans)) != NULL;)
+ if (!strcmp(fans->name, "rpm-fans"))
+ break;
+ for (fan = NULL;
+ fans && (fan = of_get_next_child(fans, fan)) != NULL;) {
+ struct smu_fan_control *fct;
+
+ fct = smu_fan_create(fan, 0);
+ if (fct == NULL) {
+ printk(KERN_WARNING "windfarm: Failed to create SMU "
+ "RPM fan %s\n", fan->name);
+ continue;
+ }
+ list_add(&fct->link, &smu_fans);
+ }
+ of_node_put(fans);
+
+
+ /* Look for PWM fans */
+ for (fans = NULL; (fans = of_get_next_child(smu, fans)) != NULL;)
+ if (!strcmp(fans->name, "pwm-fans"))
+ break;
+ for (fan = NULL;
+ fans && (fan = of_get_next_child(fans, fan)) != NULL;) {
+ struct smu_fan_control *fct;
+
+ fct = smu_fan_create(fan, 1);
+ if (fct == NULL) {
+ printk(KERN_WARNING "windfarm: Failed to create SMU "
+ "PWM fan %s\n", fan->name);
+ continue;
+ }
+ list_add(&fct->link, &smu_fans);
+ }
+ of_node_put(fans);
+ of_node_put(smu);
+
+ return 0;
+}
+
+static void __exit smu_controls_exit(void)
+{
+ struct smu_fan_control *fct;
+
+ while (!list_empty(&smu_fans)) {
+ fct = list_entry(smu_fans.next, struct smu_fan_control, link);
+ list_del(&fct->link);
+ wf_unregister_control(&fct->ctrl);
+ }
+}
+
+
+module_init(smu_controls_init);
+module_exit(smu_controls_exit);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("SMU control objects for PowerMacs thermal control");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/macintosh/windfarm_smu_sensors.c b/drivers/macintosh/windfarm_smu_sensors.c
new file mode 100644
index 000000000000..b558cc209d49
--- /dev/null
+++ b/drivers/macintosh/windfarm_smu_sensors.c
@@ -0,0 +1,479 @@
+/*
+ * Windfarm PowerMac thermal control. SMU based sensors
+ *
+ * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Released under the term of the GNU GPL v2.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/sections.h>
+#include <asm/smu.h>
+
+#include "windfarm.h"
+
+#define VERSION "0.2"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(args...) printk(args)
+#else
+#define DBG(args...) do { } while(0)
+#endif
+
+/*
+ * Various SMU "partitions" calibration objects for which we
+ * keep pointers here for use by bits & pieces of the driver
+ */
+static struct smu_sdbp_cpuvcp *cpuvcp;
+static int cpuvcp_version;
+static struct smu_sdbp_cpudiode *cpudiode;
+static struct smu_sdbp_slotspow *slotspow;
+static u8 *debugswitches;
+
+/*
+ * SMU basic sensors objects
+ */
+
+static LIST_HEAD(smu_ads);
+
+struct smu_ad_sensor {
+ struct list_head link;
+ u32 reg; /* index in SMU */
+ struct wf_sensor sens;
+};
+#define to_smu_ads(c) container_of(c, struct smu_ad_sensor, sens)
+
+static void smu_ads_release(struct wf_sensor *sr)
+{
+ struct smu_ad_sensor *ads = to_smu_ads(sr);
+
+ kfree(ads);
+}
+
+static int smu_read_adc(u8 id, s32 *value)
+{
+ struct smu_simple_cmd cmd;
+ DECLARE_COMPLETION(comp);
+ int rc;
+
+ rc = smu_queue_simple(&cmd, SMU_CMD_READ_ADC, 1,
+ smu_done_complete, &comp, id);
+ if (rc)
+ return rc;
+ wait_for_completion(&comp);
+ if (cmd.cmd.status != 0)
+ return cmd.cmd.status;
+ if (cmd.cmd.reply_len != 2) {
+ printk(KERN_ERR "winfarm: read ADC 0x%x returned %d bytes !\n",
+ id, cmd.cmd.reply_len);
+ return -EIO;
+ }
+ *value = *((u16 *)cmd.buffer);
+ return 0;
+}
+
+static int smu_cputemp_get(struct wf_sensor *sr, s32 *value)
+{
+ struct smu_ad_sensor *ads = to_smu_ads(sr);
+ int rc;
+ s32 val;
+ s64 scaled;
+
+ rc = smu_read_adc(ads->reg, &val);
+ if (rc) {
+ printk(KERN_ERR "windfarm: read CPU temp failed, err %d\n",
+ rc);
+ return rc;
+ }
+
+ /* Ok, we have to scale & adjust, taking units into account */
+ scaled = (s64)(((u64)val) * (u64)cpudiode->m_value);
+ scaled >>= 3;
+ scaled += ((s64)cpudiode->b_value) << 9;
+ *value = (s32)(scaled << 1);
+
+ return 0;
+}
+
+static int smu_cpuamp_get(struct wf_sensor *sr, s32 *value)
+{
+ struct smu_ad_sensor *ads = to_smu_ads(sr);
+ s32 val, scaled;
+ int rc;
+
+ rc = smu_read_adc(ads->reg, &val);
+ if (rc) {
+ printk(KERN_ERR "windfarm: read CPU current failed, err %d\n",
+ rc);
+ return rc;
+ }
+
+ /* Ok, we have to scale & adjust, taking units into account */
+ scaled = (s32)(val * (u32)cpuvcp->curr_scale);
+ scaled += (s32)cpuvcp->curr_offset;
+ *value = scaled << 4;
+
+ return 0;
+}
+
+static int smu_cpuvolt_get(struct wf_sensor *sr, s32 *value)
+{
+ struct smu_ad_sensor *ads = to_smu_ads(sr);
+ s32 val, scaled;
+ int rc;
+
+ rc = smu_read_adc(ads->reg, &val);
+ if (rc) {
+ printk(KERN_ERR "windfarm: read CPU voltage failed, err %d\n",
+ rc);
+ return rc;
+ }
+
+ /* Ok, we have to scale & adjust, taking units into account */
+ scaled = (s32)(val * (u32)cpuvcp->volt_scale);
+ scaled += (s32)cpuvcp->volt_offset;
+ *value = scaled << 4;
+
+ return 0;
+}
+
+static int smu_slotspow_get(struct wf_sensor *sr, s32 *value)
+{
+ struct smu_ad_sensor *ads = to_smu_ads(sr);
+ s32 val, scaled;
+ int rc;
+
+ rc = smu_read_adc(ads->reg, &val);
+ if (rc) {
+ printk(KERN_ERR "windfarm: read slots power failed, err %d\n",
+ rc);
+ return rc;
+ }
+
+ /* Ok, we have to scale & adjust, taking units into account */
+ scaled = (s32)(val * (u32)slotspow->pow_scale);
+ scaled += (s32)slotspow->pow_offset;
+ *value = scaled << 4;
+
+ return 0;
+}
+
+
+static struct wf_sensor_ops smu_cputemp_ops = {
+ .get_value = smu_cputemp_get,
+ .release = smu_ads_release,
+ .owner = THIS_MODULE,
+};
+static struct wf_sensor_ops smu_cpuamp_ops = {
+ .get_value = smu_cpuamp_get,
+ .release = smu_ads_release,
+ .owner = THIS_MODULE,
+};
+static struct wf_sensor_ops smu_cpuvolt_ops = {
+ .get_value = smu_cpuvolt_get,
+ .release = smu_ads_release,
+ .owner = THIS_MODULE,
+};
+static struct wf_sensor_ops smu_slotspow_ops = {
+ .get_value = smu_slotspow_get,
+ .release = smu_ads_release,
+ .owner = THIS_MODULE,
+};
+
+
+static struct smu_ad_sensor *smu_ads_create(struct device_node *node)
+{
+ struct smu_ad_sensor *ads;
+ char *c, *l;
+ u32 *v;
+
+ ads = kmalloc(sizeof(struct smu_ad_sensor), GFP_KERNEL);
+ if (ads == NULL)
+ return NULL;
+ c = (char *)get_property(node, "device_type", NULL);
+ l = (char *)get_property(node, "location", NULL);
+ if (c == NULL || l == NULL)
+ goto fail;
+
+ /* We currently pick the sensors based on the OF name and location
+ * properties, while Darwin uses the sensor-id's.
+ * The problem with the IDs is that they are model specific while it
+ * looks like apple has been doing a reasonably good job at keeping
+ * the names and locations consistents so I'll stick with the names
+ * and locations for now.
+ */
+ if (!strcmp(c, "temp-sensor") &&
+ !strcmp(l, "CPU T-Diode")) {
+ ads->sens.ops = &smu_cputemp_ops;
+ ads->sens.name = "cpu-temp";
+ } else if (!strcmp(c, "current-sensor") &&
+ !strcmp(l, "CPU Current")) {
+ ads->sens.ops = &smu_cpuamp_ops;
+ ads->sens.name = "cpu-current";
+ } else if (!strcmp(c, "voltage-sensor") &&
+ !strcmp(l, "CPU Voltage")) {
+ ads->sens.ops = &smu_cpuvolt_ops;
+ ads->sens.name = "cpu-voltage";
+ } else if (!strcmp(c, "power-sensor") &&
+ !strcmp(l, "Slots Power")) {
+ ads->sens.ops = &smu_slotspow_ops;
+ ads->sens.name = "slots-power";
+ if (slotspow == NULL) {
+ DBG("wf: slotspow partition (%02x) not found\n",
+ SMU_SDB_SLOTSPOW_ID);
+ goto fail;
+ }
+ } else
+ goto fail;
+
+ v = (u32 *)get_property(node, "reg", NULL);
+ if (v == NULL)
+ goto fail;
+ ads->reg = *v;
+
+ if (wf_register_sensor(&ads->sens))
+ goto fail;
+ return ads;
+ fail:
+ kfree(ads);
+ return NULL;
+}
+
+/*
+ * SMU Power combo sensor object
+ */
+
+struct smu_cpu_power_sensor {
+ struct list_head link;
+ struct wf_sensor *volts;
+ struct wf_sensor *amps;
+ int fake_volts : 1;
+ int quadratic : 1;
+ struct wf_sensor sens;
+};
+#define to_smu_cpu_power(c) container_of(c, struct smu_cpu_power_sensor, sens)
+
+static struct smu_cpu_power_sensor *smu_cpu_power;
+
+static void smu_cpu_power_release(struct wf_sensor *sr)
+{
+ struct smu_cpu_power_sensor *pow = to_smu_cpu_power(sr);
+
+ if (pow->volts)
+ wf_put_sensor(pow->volts);
+ if (pow->amps)
+ wf_put_sensor(pow->amps);
+ kfree(pow);
+}
+
+static int smu_cpu_power_get(struct wf_sensor *sr, s32 *value)
+{
+ struct smu_cpu_power_sensor *pow = to_smu_cpu_power(sr);
+ s32 volts, amps, power;
+ u64 tmps, tmpa, tmpb;
+ int rc;
+
+ rc = pow->amps->ops->get_value(pow->amps, &amps);
+ if (rc)
+ return rc;
+
+ if (pow->fake_volts) {
+ *value = amps * 12 - 0x30000;
+ return 0;
+ }
+
+ rc = pow->volts->ops->get_value(pow->volts, &volts);
+ if (rc)
+ return rc;
+
+ power = (s32)((((u64)volts) * ((u64)amps)) >> 16);
+ if (!pow->quadratic) {
+ *value = power;
+ return 0;
+ }
+ tmps = (((u64)power) * ((u64)power)) >> 16;
+ tmpa = ((u64)cpuvcp->power_quads[0]) * tmps;
+ tmpb = ((u64)cpuvcp->power_quads[1]) * ((u64)power);
+ *value = (tmpa >> 28) + (tmpb >> 28) + (cpuvcp->power_quads[2] >> 12);
+
+ return 0;
+}
+
+static struct wf_sensor_ops smu_cpu_power_ops = {
+ .get_value = smu_cpu_power_get,
+ .release = smu_cpu_power_release,
+ .owner = THIS_MODULE,
+};
+
+
+static struct smu_cpu_power_sensor *
+smu_cpu_power_create(struct wf_sensor *volts, struct wf_sensor *amps)
+{
+ struct smu_cpu_power_sensor *pow;
+
+ pow = kmalloc(sizeof(struct smu_cpu_power_sensor), GFP_KERNEL);
+ if (pow == NULL)
+ return NULL;
+ pow->sens.ops = &smu_cpu_power_ops;
+ pow->sens.name = "cpu-power";
+
+ wf_get_sensor(volts);
+ pow->volts = volts;
+ wf_get_sensor(amps);
+ pow->amps = amps;
+
+ /* Some early machines need a faked voltage */
+ if (debugswitches && ((*debugswitches) & 0x80)) {
+ printk(KERN_INFO "windfarm: CPU Power sensor using faked"
+ " voltage !\n");
+ pow->fake_volts = 1;
+ } else
+ pow->fake_volts = 0;
+
+ /* Try to use quadratic transforms on PowerMac8,1 and 9,1 for now,
+ * I yet have to figure out what's up with 8,2 and will have to
+ * adjust for later, unless we can 100% trust the SDB partition...
+ */
+ if ((machine_is_compatible("PowerMac8,1") ||
+ machine_is_compatible("PowerMac8,2") ||
+ machine_is_compatible("PowerMac9,1")) &&
+ cpuvcp_version >= 2) {
+ pow->quadratic = 1;
+ DBG("windfarm: CPU Power using quadratic transform\n");
+ } else
+ pow->quadratic = 0;
+
+ if (wf_register_sensor(&pow->sens))
+ goto fail;
+ return pow;
+ fail:
+ kfree(pow);
+ return NULL;
+}
+
+static int smu_fetch_param_partitions(void)
+{
+ struct smu_sdbp_header *hdr;
+
+ /* Get CPU voltage/current/power calibration data */
+ hdr = smu_get_sdb_partition(SMU_SDB_CPUVCP_ID, NULL);
+ if (hdr == NULL) {
+ DBG("wf: cpuvcp partition (%02x) not found\n",
+ SMU_SDB_CPUVCP_ID);
+ return -ENODEV;
+ }
+ cpuvcp = (struct smu_sdbp_cpuvcp *)&hdr[1];
+ /* Keep version around */
+ cpuvcp_version = hdr->version;
+
+ /* Get CPU diode calibration data */
+ hdr = smu_get_sdb_partition(SMU_SDB_CPUDIODE_ID, NULL);
+ if (hdr == NULL) {
+ DBG("wf: cpudiode partition (%02x) not found\n",
+ SMU_SDB_CPUDIODE_ID);
+ return -ENODEV;
+ }
+ cpudiode = (struct smu_sdbp_cpudiode *)&hdr[1];
+
+ /* Get slots power calibration data if any */
+ hdr = smu_get_sdb_partition(SMU_SDB_SLOTSPOW_ID, NULL);
+ if (hdr != NULL)
+ slotspow = (struct smu_sdbp_slotspow *)&hdr[1];
+
+ /* Get debug switches if any */
+ hdr = smu_get_sdb_partition(SMU_SDB_DEBUG_SWITCHES_ID, NULL);
+ if (hdr != NULL)
+ debugswitches = (u8 *)&hdr[1];
+
+ return 0;
+}
+
+static int __init smu_sensors_init(void)
+{
+ struct device_node *smu, *sensors, *s;
+ struct smu_ad_sensor *volt_sensor = NULL, *curr_sensor = NULL;
+ int rc;
+
+ if (!smu_present())
+ return -ENODEV;
+
+ /* Get parameters partitions */
+ rc = smu_fetch_param_partitions();
+ if (rc)
+ return rc;
+
+ smu = of_find_node_by_type(NULL, "smu");
+ if (smu == NULL)
+ return -ENODEV;
+
+ /* Look for sensors subdir */
+ for (sensors = NULL;
+ (sensors = of_get_next_child(smu, sensors)) != NULL;)
+ if (!strcmp(sensors->name, "sensors"))
+ break;
+
+ of_node_put(smu);
+
+ /* Create basic sensors */
+ for (s = NULL;
+ sensors && (s = of_get_next_child(sensors, s)) != NULL;) {
+ struct smu_ad_sensor *ads;
+
+ ads = smu_ads_create(s);
+ if (ads == NULL)
+ continue;
+ list_add(&ads->link, &smu_ads);
+ /* keep track of cpu voltage & current */
+ if (!strcmp(ads->sens.name, "cpu-voltage"))
+ volt_sensor = ads;
+ else if (!strcmp(ads->sens.name, "cpu-current"))
+ curr_sensor = ads;
+ }
+
+ of_node_put(sensors);
+
+ /* Create CPU power sensor if possible */
+ if (volt_sensor && curr_sensor)
+ smu_cpu_power = smu_cpu_power_create(&volt_sensor->sens,
+ &curr_sensor->sens);
+
+ return 0;
+}
+
+static void __exit smu_sensors_exit(void)
+{
+ struct smu_ad_sensor *ads;
+
+ /* dispose of power sensor */
+ if (smu_cpu_power)
+ wf_unregister_sensor(&smu_cpu_power->sens);
+
+ /* dispose of basic sensors */
+ while (!list_empty(&smu_ads)) {
+ ads = list_entry(smu_ads.next, struct smu_ad_sensor, link);
+ list_del(&ads->link);
+ wf_unregister_sensor(&ads->sens);
+ }
+}
+
+
+module_init(smu_sensors_init);
+module_exit(smu_sensors_exit);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("SMU sensor objects for PowerMacs thermal control");
+MODULE_LICENSE("GPL");
+
diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index 6fd57f154197..fb117b74809e 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -49,6 +49,39 @@ static int property_read_proc(char *page, char **start, off_t off,
*/
/*
+ * Add a property to a node
+ */
+static struct proc_dir_entry *
+__proc_device_tree_add_prop(struct proc_dir_entry *de, struct property *pp)
+{
+ struct proc_dir_entry *ent;
+
+ /*
+ * Unfortunately proc_register puts each new entry
+ * at the beginning of the list. So we rearrange them.
+ */
+ ent = create_proc_read_entry(pp->name,
+ strncmp(pp->name, "security-", 9)
+ ? S_IRUGO : S_IRUSR, de,
+ property_read_proc, pp);
+ if (ent == NULL)
+ return NULL;
+
+ if (!strncmp(pp->name, "security-", 9))
+ ent->size = 0; /* don't leak number of password chars */
+ else
+ ent->size = pp->length;
+
+ return ent;
+}
+
+
+void proc_device_tree_add_prop(struct proc_dir_entry *pde, struct property *prop)
+{
+ __proc_device_tree_add_prop(pde, prop);
+}
+
+/*
* Process a node, adding entries for its children and its properties.
*/
void proc_device_tree_add_node(struct device_node *np,
@@ -57,11 +90,9 @@ void proc_device_tree_add_node(struct device_node *np,
struct property *pp;
struct proc_dir_entry *ent;
struct device_node *child;
- struct proc_dir_entry *list = NULL, **lastp;
const char *p;
set_node_proc_entry(np, de);
- lastp = &list;
for (child = NULL; (child = of_get_next_child(np, child));) {
p = strrchr(child->full_name, '/');
if (!p)
@@ -71,9 +102,6 @@ void proc_device_tree_add_node(struct device_node *np,
ent = proc_mkdir(p, de);
if (ent == 0)
break;
- *lastp = ent;
- ent->next = NULL;
- lastp = &ent->next;
proc_device_tree_add_node(child, ent);
}
of_node_put(child);
@@ -84,7 +112,7 @@ void proc_device_tree_add_node(struct device_node *np,
* properties are quite unimportant for us though, thus we
* simply "skip" them here, but we do have to check.
*/
- for (ent = list; ent != NULL; ent = ent->next)
+ for (ent = de->subdir; ent != NULL; ent = ent->next)
if (!strcmp(ent->name, pp->name))
break;
if (ent != NULL) {
@@ -94,25 +122,10 @@ void proc_device_tree_add_node(struct device_node *np,
continue;
}
- /*
- * Unfortunately proc_register puts each new entry
- * at the beginning of the list. So we rearrange them.
- */
- ent = create_proc_read_entry(pp->name,
- strncmp(pp->name, "security-", 9)
- ? S_IRUGO : S_IRUSR, de,
- property_read_proc, pp);
+ ent = __proc_device_tree_add_prop(de, pp);
if (ent == 0)
break;
- if (!strncmp(pp->name, "security-", 9))
- ent->size = 0; /* don't leak number of password chars */
- else
- ent->size = pp->length;
- ent->next = NULL;
- *lastp = ent;
- lastp = &ent->next;
}
- de->subdir = list;
}
/*
diff --git a/include/asm-ppc/ide.h b/include/asm-powerpc/ide.h
index 7d6e6599fac4..da5f640480cf 100644
--- a/include/asm-ppc/ide.h
+++ b/include/asm-powerpc/ide.h
@@ -1,24 +1,27 @@
/*
- * linux/include/asm-ppc/ide.h
+ * Copyright (C) 1994-1996 Linus Torvalds & authors
*
- * Copyright (C) 1994-1996 Linus Torvalds & authors */
-
-/*
- * This file contains the ppc architecture specific IDE code.
+ * This file contains the powerpc architecture specific IDE code.
*/
-
-#ifndef __ASMPPC_IDE_H
-#define __ASMPPC_IDE_H
+#ifndef _ASM_POWERPC_IDE_H
+#define _ASM_POWERPC_IDE_H
#ifdef __KERNEL__
+#ifndef __powerpc64__
#include <linux/sched.h>
#include <asm/mpc8xx.h>
+#endif
#ifndef MAX_HWIFS
+#ifdef __powerpc64__
+#define MAX_HWIFS 10
+#else
#define MAX_HWIFS 8
#endif
+#endif
+#ifndef __powerpc64__
#include <linux/config.h>
#include <linux/hdreg.h>
#include <linux/ioport.h>
@@ -59,9 +62,6 @@ static __inline__ unsigned long ide_default_io_base(int index)
return 0;
}
-#define IDE_ARCH_OBSOLETE_INIT
-#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
-
#ifdef CONFIG_PCI
#define ide_init_default_irq(base) (0)
#else
@@ -73,6 +73,11 @@ static __inline__ unsigned long ide_default_io_base(int index)
#define ide_ack_intr(hwif) (hwif->hw.ack_intr ? hwif->hw.ack_intr(hwif) : 1)
#endif
+#endif /* __powerpc64__ */
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
+
#endif /* __KERNEL__ */
-#endif /* __ASMPPC_IDE_H */
+#endif /* _ASM_POWERPC_IDE_H */
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index fa03864d06eb..5670f0cd6143 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -82,7 +82,6 @@ struct machdep_calls {
void (*iommu_dev_setup)(struct pci_dev *dev);
void (*iommu_bus_setup)(struct pci_bus *bus);
void (*irq_bus_setup)(struct pci_bus *bus);
- int (*set_dabr)(unsigned long dabr);
#endif
int (*probe)(int platform);
@@ -158,6 +157,9 @@ struct machdep_calls {
platform, called once per cpu. */
void (*enable_pmcs)(void);
+ /* Set DABR for this platform, leave empty for default implemenation */
+ int (*set_dabr)(unsigned long dabr);
+
#ifdef CONFIG_PPC32 /* XXX for now */
/* A general init function, called by ppc_init in init/main.c.
May be NULL. */
diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h
index a88728fba8f6..13aacff755f3 100644
--- a/include/asm-powerpc/ppc-pci.h
+++ b/include/asm-powerpc/ppc-pci.h
@@ -34,6 +34,7 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre,
void pci_devs_phb_init(void);
void pci_devs_phb_init_dynamic(struct pci_controller *phb);
+void __devinit scan_phb(struct pci_controller *hose);
/* PCI address cache management routines */
void pci_addr_cache_insert_device(struct pci_dev *dev);
diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h
index 7587bf5f38c6..f999df1c5c90 100644
--- a/include/asm-powerpc/prom.h
+++ b/include/asm-powerpc/prom.h
@@ -203,7 +203,7 @@ extern int prom_n_addr_cells(struct device_node* np);
extern int prom_n_size_cells(struct device_node* np);
extern int prom_n_intr_cells(struct device_node* np);
extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
-extern void prom_add_property(struct device_node* np, struct property* prop);
+extern int prom_add_property(struct device_node* np, struct property* prop);
#ifdef CONFIG_PPC32
/*
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
index da848412f11b..489cf4c99c21 100644
--- a/include/asm-powerpc/reg.h
+++ b/include/asm-powerpc/reg.h
@@ -396,6 +396,9 @@
#define SPRN_VRSAVE 0x100 /* Vector Register Save Register */
#define SPRN_XER 0x001 /* Fixed Point Exception Register */
+#define SPRN_SCOMC 0x114 /* SCOM Access Control */
+#define SPRN_SCOMD 0x115 /* SCOM Access DATA */
+
/* Performance monitor SPRs */
#ifdef CONFIG_PPC64
#define SPRN_MMCR0 795
@@ -594,7 +597,11 @@ static inline void ppc64_runlatch_off(void)
mtspr(SPRN_CTRLT, ctrl);
}
}
-#endif
+
+extern unsigned long scom970_read(unsigned int address);
+extern void scom970_write(unsigned int address, unsigned long value);
+
+#endif /* CONFIG_PPC64 */
#define __get_SP() ({unsigned long sp; \
asm volatile("mr %0,1": "=r" (sp)); sp;})
diff --git a/include/asm-powerpc/smp.h b/include/asm-powerpc/smp.h
index 8bcdd0faefea..98581e5a8279 100644
--- a/include/asm-powerpc/smp.h
+++ b/include/asm-powerpc/smp.h
@@ -86,7 +86,6 @@ extern void __cpu_die(unsigned int cpu);
#else
/* for UP */
#define smp_setup_cpu_maps()
-#define smp_release_cpus()
#endif /* CONFIG_SMP */
@@ -94,6 +93,9 @@ extern void __cpu_die(unsigned int cpu);
#define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id)
#define set_hard_smp_processor_id(CPU, VAL) \
do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0)
+
+extern void smp_release_cpus(void);
+
#else
/* 32-bit */
#ifndef CONFIG_SMP
diff --git a/include/asm-powerpc/smu.h b/include/asm-powerpc/smu.h
index dee8eefe47bc..76c29a9784dd 100644
--- a/include/asm-powerpc/smu.h
+++ b/include/asm-powerpc/smu.h
@@ -20,16 +20,52 @@
/*
* Partition info commands
*
- * I do not know what those are for at this point
+ * These commands are used to retreive the sdb-partition-XX datas from
+ * the SMU. The lenght is always 2. First byte is the subcommand code
+ * and second byte is the partition ID.
+ *
+ * The reply is 6 bytes:
+ *
+ * - 0..1 : partition address
+ * - 2 : a byte containing the partition ID
+ * - 3 : length (maybe other bits are rest of header ?)
+ *
+ * The data must then be obtained with calls to another command:
+ * SMU_CMD_MISC_ee_GET_DATABLOCK_REC (described below).
*/
#define SMU_CMD_PARTITION_COMMAND 0x3e
+#define SMU_CMD_PARTITION_LATEST 0x01
+#define SMU_CMD_PARTITION_BASE 0x02
+#define SMU_CMD_PARTITION_UPDATE 0x03
/*
* Fan control
*
- * This is a "mux" for fan control commands, first byte is the
- * "sub" command.
+ * This is a "mux" for fan control commands. The command seem to
+ * act differently based on the number of arguments. With 1 byte
+ * of argument, this seem to be queries for fans status, setpoint,
+ * etc..., while with 0xe arguments, we will set the fans speeds.
+ *
+ * Queries (1 byte arg):
+ * ---------------------
+ *
+ * arg=0x01: read RPM fans status
+ * arg=0x02: read RPM fans setpoint
+ * arg=0x11: read PWM fans status
+ * arg=0x12: read PWM fans setpoint
+ *
+ * the "status" queries return the current speed while the "setpoint" ones
+ * return the programmed/target speed. It _seems_ that the result is a bit
+ * mask in the first byte of active/available fans, followed by 6 words (16
+ * bits) containing the requested speed.
+ *
+ * Setpoint (14 bytes arg):
+ * ------------------------
+ *
+ * first arg byte is 0 for RPM fans and 0x10 for PWM. Second arg byte is the
+ * mask of fans affected by the command. Followed by 6 words containing the
+ * setpoint value for selected fans in the mask (or 0 if mask value is 0)
*/
#define SMU_CMD_FAN_COMMAND 0x4a
@@ -144,7 +180,11 @@
* - lenght 8 ("VSLEWxyz") has 3 additional bytes appended, and is
* used to set the voltage slewing point. The SMU replies with "DONE"
* I yet have to figure out their exact meaning of those 3 bytes in
- * both cases.
+ * both cases. They seem to be:
+ * x = processor mask
+ * y = op. point index
+ * z = processor freq. step index
+ * I haven't yet decyphered result codes
*
*/
#define SMU_CMD_POWER_COMMAND 0xaa
@@ -152,6 +192,14 @@
#define SMU_CMD_POWER_SHUTDOWN "SHUTDOWN"
#define SMU_CMD_POWER_VOLTAGE_SLEW "VSLEW"
+/*
+ * Read ADC sensors
+ *
+ * This command takes one byte of parameter: the sensor ID (or "reg"
+ * value in the device-tree) and returns a 16 bits value
+ */
+#define SMU_CMD_READ_ADC 0xd8
+
/* Misc commands
*
* This command seem to be a grab bag of various things
@@ -172,6 +220,25 @@
* Misc commands
*
* This command seem to be a grab bag of various things
+ *
+ * SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to
+ * transfer blocks of data from the SMU. So far, I've decrypted it's
+ * usage to retreive partition data. In order to do that, you have to
+ * break your transfer in "chunks" since that command cannot transfer
+ * more than a chunk at a time. The chunk size used by OF is 0xe bytes,
+ * but it seems that the darwin driver will let you do 0x1e bytes if
+ * your "PMU" version is >= 0x30. You can get the "PMU" version apparently
+ * either in the last 16 bits of property "smu-version-pmu" or as the 16
+ * bytes at offset 1 of "smu-version-info"
+ *
+ * For each chunk, the command takes 7 bytes of arguments:
+ * byte 0: subcommand code (0x02)
+ * byte 1: 0x04 (always, I don't know what it means, maybe the address
+ * space to use or some other nicety. It's hard coded in OF)
+ * byte 2..5: SMU address of the chunk (big endian 32 bits)
+ * byte 6: size to transfer (up to max chunk size)
+ *
+ * The data is returned directly
*/
#define SMU_CMD_MISC_ee_COMMAND 0xee
#define SMU_CMD_MISC_ee_GET_DATABLOCK_REC 0x02
@@ -333,6 +400,128 @@ extern int smu_queue_i2c(struct smu_i2c_cmd *cmd);
#endif /* __KERNEL__ */
+
+/*
+ * - SMU "sdb" partitions informations -
+ */
+
+
+/*
+ * Partition header format
+ */
+struct smu_sdbp_header {
+ __u8 id;
+ __u8 len;
+ __u8 version;
+ __u8 flags;
+};
+
+
+ /*
+ * demangle 16 and 32 bits integer in some SMU partitions
+ * (currently, afaik, this concerns only the FVT partition
+ * (0x12)
+ */
+#define SMU_U16_MIX(x) le16_to_cpu(x);
+#define SMU_U32_MIX(x) ((((x) & 0xff00ff00u) >> 8)|(((x) & 0x00ff00ffu) << 8))
+
+
+/* This is the definition of the SMU sdb-partition-0x12 table (called
+ * CPU F/V/T operating points in Darwin). The definition for all those
+ * SMU tables should be moved to some separate file
+ */
+#define SMU_SDB_FVT_ID 0x12
+
+struct smu_sdbp_fvt {
+ __u32 sysclk; /* Base SysClk frequency in Hz for
+ * this operating point. Value need to
+ * be unmixed with SMU_U32_MIX()
+ */
+ __u8 pad;
+ __u8 maxtemp; /* Max temp. supported by this
+ * operating point
+ */
+
+ __u16 volts[3]; /* CPU core voltage for the 3
+ * PowerTune modes, a mode with
+ * 0V = not supported. Value need
+ * to be unmixed with SMU_U16_MIX()
+ */
+};
+
+/* This partition contains voltage & current sensor calibration
+ * informations
+ */
+#define SMU_SDB_CPUVCP_ID 0x21
+
+struct smu_sdbp_cpuvcp {
+ __u16 volt_scale; /* u4.12 fixed point */
+ __s16 volt_offset; /* s4.12 fixed point */
+ __u16 curr_scale; /* u4.12 fixed point */
+ __s16 curr_offset; /* s4.12 fixed point */
+ __s32 power_quads[3]; /* s4.28 fixed point */
+};
+
+/* This partition contains CPU thermal diode calibration
+ */
+#define SMU_SDB_CPUDIODE_ID 0x18
+
+struct smu_sdbp_cpudiode {
+ __u16 m_value; /* u1.15 fixed point */
+ __s16 b_value; /* s10.6 fixed point */
+
+};
+
+/* This partition contains Slots power calibration
+ */
+#define SMU_SDB_SLOTSPOW_ID 0x78
+
+struct smu_sdbp_slotspow {
+ __u16 pow_scale; /* u4.12 fixed point */
+ __s16 pow_offset; /* s4.12 fixed point */
+};
+
+/* This partition contains machine specific version information about
+ * the sensor/control layout
+ */
+#define SMU_SDB_SENSORTREE_ID 0x25
+
+struct smu_sdbp_sensortree {
+ u8 model_id;
+ u8 unknown[3];
+};
+
+/* This partition contains CPU thermal control PID informations. So far
+ * only single CPU machines have been seen with an SMU, so we assume this
+ * carries only informations for those
+ */
+#define SMU_SDB_CPUPIDDATA_ID 0x17
+
+struct smu_sdbp_cpupiddata {
+ u8 unknown1;
+ u8 target_temp_delta;
+ u8 unknown2;
+ u8 history_len;
+ s16 power_adj;
+ u16 max_power;
+ s32 gp,gr,gd;
+};
+
+
+/* Other partitions without known structures */
+#define SMU_SDB_DEBUG_SWITCHES_ID 0x05
+
+#ifdef __KERNEL__
+/*
+ * This returns the pointer to an SMU "sdb" partition data or NULL
+ * if not found. The data format is described below
+ */
+extern struct smu_sdbp_header *smu_get_sdb_partition(int id,
+ unsigned int *size);
+
+#endif /* __KERNEL__ */
+
+
/*
* - Userland interface -
*/
@@ -365,8 +554,10 @@ struct smu_user_cmd_hdr
__u32 cmdtype;
#define SMU_CMDTYPE_SMU 0 /* SMU command */
#define SMU_CMDTYPE_WANTS_EVENTS 1 /* switch fd to events mode */
+#define SMU_CMDTYPE_GET_PARTITION 2 /* retreive an sdb partition */
__u8 cmd; /* SMU command byte */
+ __u8 pad[3]; /* padding */
__u32 data_len; /* Lenght of data following */
};
diff --git a/include/asm-powerpc/xmon.h b/include/asm-powerpc/xmon.h
index 43f7129984c7..ace2072d4a83 100644
--- a/include/asm-powerpc/xmon.h
+++ b/include/asm-powerpc/xmon.h
@@ -7,6 +7,7 @@ struct pt_regs;
extern int xmon(struct pt_regs *excp);
extern void xmon_printf(const char *fmt, ...);
extern void xmon_init(int);
+extern void xmon_map_scc(void);
#endif
#endif
diff --git a/include/asm-ppc/btext.h b/include/asm-ppc/btext.h
index 36c7640d00f2..ccaefabe0bf5 100644
--- a/include/asm-ppc/btext.h
+++ b/include/asm-ppc/btext.h
@@ -17,18 +17,18 @@ extern unsigned long disp_BAT[2];
extern boot_infos_t disp_bi;
extern int boot_text_mapped;
-void btext_init(boot_infos_t *bi);
-void btext_welcome(void);
-void btext_prepare_BAT(void);
-void btext_setup_display(int width, int height, int depth, int pitch,
- unsigned long address);
-void map_boot_text(void);
-void btext_update_display(unsigned long phys, int width, int height,
- int depth, int pitch);
+extern void init_boot_display(void);
+extern void btext_welcome(void);
+extern void btext_prepare_BAT(void);
+extern void btext_setup_display(int width, int height, int depth, int pitch,
+ unsigned long address);
+extern void map_boot_text(void);
+extern void btext_update_display(unsigned long phys, int width, int height,
+ int depth, int pitch);
-void btext_drawchar(char c);
-void btext_drawstring(const char *str);
-void btext_drawhex(unsigned long v);
+extern void btext_drawchar(char c);
+extern void btext_drawstring(const char *str);
+extern void btext_drawhex(unsigned long v);
#endif /* __KERNEL__ */
#endif /* __PPC_BTEXT_H */
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
index f7f614dfc648..2bfdf9c98459 100644
--- a/include/asm-ppc/io.h
+++ b/include/asm-ppc/io.h
@@ -237,9 +237,9 @@ static inline void __raw_writel(__u32 b, volatile void __iomem *addr)
#define outsl(port, buf, nl) _outsl_ns((port)+___IO_BASE, (buf), (nl))
/*
- * On powermacs, we will get a machine check exception if we
- * try to read data from a non-existent I/O port. Because the
- * machine check is an asynchronous exception, it isn't
+ * On powermacs and 8xx we will get a machine check exception
+ * if we try to read data from a non-existent I/O port. Because
+ * the machine check is an asynchronous exception, it isn't
* well-defined which instruction SRR0 will point to when the
* exception occurs.
* With the sequence below (twi; isync; nop), we have found that
@@ -258,7 +258,7 @@ extern __inline__ unsigned int name(unsigned int port) \
{ \
unsigned int x; \
__asm__ __volatile__( \
- op " %0,0,%1\n" \
+ "0:" op " %0,0,%1\n" \
"1: twi 0,%0,0\n" \
"2: isync\n" \
"3: nop\n" \
@@ -269,6 +269,7 @@ extern __inline__ unsigned int name(unsigned int port) \
".previous\n" \
".section __ex_table,\"a\"\n" \
" .align 2\n" \
+ " .long 0b,5b\n" \
" .long 1b,5b\n" \
" .long 2b,5b\n" \
" .long 3b,5b\n" \
@@ -282,11 +283,12 @@ extern __inline__ unsigned int name(unsigned int port) \
extern __inline__ void name(unsigned int val, unsigned int port) \
{ \
__asm__ __volatile__( \
- op " %0,0,%1\n" \
+ "0:" op " %0,0,%1\n" \
"1: sync\n" \
"2:\n" \
".section __ex_table,\"a\"\n" \
" .align 2\n" \
+ " .long 0b,2b\n" \
" .long 1b,2b\n" \
".previous" \
: : "r" (val), "r" (port + ___IO_BASE)); \
diff --git a/include/asm-ppc/kgdb.h b/include/asm-ppc/kgdb.h
index 1d3c927ce626..b617dac82969 100644
--- a/include/asm-ppc/kgdb.h
+++ b/include/asm-ppc/kgdb.h
@@ -31,7 +31,7 @@ extern void breakpoint(void);
/* For taking exceptions
* these are defined in traps.c
*/
-extern void (*debugger)(struct pt_regs *regs);
+extern int (*debugger)(struct pt_regs *regs);
extern int (*debugger_bpt)(struct pt_regs *regs);
extern int (*debugger_sstep)(struct pt_regs *regs);
extern int (*debugger_iabr_match)(struct pt_regs *regs);
diff --git a/include/asm-ppc/prom.h b/include/asm-ppc/prom.h
index 75c0637acdc8..3e39827ed566 100644
--- a/include/asm-ppc/prom.h
+++ b/include/asm-ppc/prom.h
@@ -93,7 +93,7 @@ extern int device_is_compatible(struct device_node *device, const char *);
extern int machine_is_compatible(const char *compat);
extern unsigned char *get_property(struct device_node *node, const char *name,
int *lenp);
-extern void prom_add_property(struct device_node* np, struct property* prop);
+extern int prom_add_property(struct device_node* np, struct property* prop);
extern void prom_get_irq_senses(unsigned char *, int, int);
extern int prom_n_addr_cells(struct device_node* np);
extern int prom_n_size_cells(struct device_node* np);
diff --git a/include/asm-ppc64/ide.h b/include/asm-ppc64/ide.h
deleted file mode 100644
index 0aae1c590c0e..000000000000
--- a/include/asm-ppc64/ide.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * linux/include/asm-ppc/ide.h
- *
- * Copyright (C) 1994-1996 Linus Torvalds & authors
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * This file contains the ppc64 architecture specific IDE code.
- */
-
-#ifndef __ASMPPC64_IDE_H
-#define __ASMPPC64_IDE_H
-
-#ifdef __KERNEL__
-
-#ifndef MAX_HWIFS
-# define MAX_HWIFS 10
-#endif
-
-#define IDE_ARCH_OBSOLETE_INIT
-#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMPPC64_IDE_H */
diff --git a/include/asm-ppc64/pci.h b/include/asm-ppc64/pci.h
index 342e2d755550..fafdf885a3cc 100644
--- a/include/asm-ppc64/pci.h
+++ b/include/asm-ppc64/pci.h
@@ -162,6 +162,14 @@ pcibios_fixup_device_resources(struct pci_dev *dev, struct pci_bus *bus);
extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
+extern struct pci_dev *of_create_pci_dev(struct device_node *node,
+ struct pci_bus *bus, int devfn);
+
+extern void of_scan_pci_bridge(struct device_node *node,
+ struct pci_dev *dev);
+
+extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
+
extern int pci_read_irq_line(struct pci_dev *dev);
extern void pcibios_add_platform_entries(struct pci_dev *dev);
diff --git a/include/asm-ppc64/ppcdebug.h b/include/asm-ppc64/ppcdebug.h
deleted file mode 100644
index fd7f696065c4..000000000000
--- a/include/asm-ppc64/ppcdebug.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef __PPCDEBUG_H
-#define __PPCDEBUG_H
-/********************************************************************
- * Author: Adam Litke, IBM Corp
- * (c) 2001
- *
- * This file contains definitions and macros for a runtime debugging
- * system for ppc64 (This should also work on 32 bit with a few
- * adjustments.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- ********************************************************************/
-
-#include <linux/config.h>
-#include <linux/types.h>
-#include <asm/udbg.h>
-#include <stdarg.h>
-
-#define PPCDBG_BITVAL(X) ((1UL)<<((unsigned long)(X)))
-
-/* Defined below are the bit positions of various debug flags in the
- * ppc64_debug_switch variable.
- * -- When adding new values, please enter them into trace names below --
- *
- * Values 62 & 63 can be used to stress the hardware page table management
- * code. They must be set statically, any attempt to change them dynamically
- * would be a very bad idea.
- */
-#define PPCDBG_MMINIT PPCDBG_BITVAL(0)
-#define PPCDBG_MM PPCDBG_BITVAL(1)
-#define PPCDBG_SYS32 PPCDBG_BITVAL(2)
-#define PPCDBG_SYS32NI PPCDBG_BITVAL(3)
-#define PPCDBG_SYS32X PPCDBG_BITVAL(4)
-#define PPCDBG_SYS32M PPCDBG_BITVAL(5)
-#define PPCDBG_SYS64 PPCDBG_BITVAL(6)
-#define PPCDBG_SYS64NI PPCDBG_BITVAL(7)
-#define PPCDBG_SYS64X PPCDBG_BITVAL(8)
-#define PPCDBG_SIGNAL PPCDBG_BITVAL(9)
-#define PPCDBG_SIGNALXMON PPCDBG_BITVAL(10)
-#define PPCDBG_BINFMT32 PPCDBG_BITVAL(11)
-#define PPCDBG_BINFMT64 PPCDBG_BITVAL(12)
-#define PPCDBG_BINFMTXMON PPCDBG_BITVAL(13)
-#define PPCDBG_BINFMT_32ADDR PPCDBG_BITVAL(14)
-#define PPCDBG_ALIGNFIXUP PPCDBG_BITVAL(15)
-#define PPCDBG_TCEINIT PPCDBG_BITVAL(16)
-#define PPCDBG_TCE PPCDBG_BITVAL(17)
-#define PPCDBG_PHBINIT PPCDBG_BITVAL(18)
-#define PPCDBG_SMP PPCDBG_BITVAL(19)
-#define PPCDBG_BOOT PPCDBG_BITVAL(20)
-#define PPCDBG_BUSWALK PPCDBG_BITVAL(21)
-#define PPCDBG_PROM PPCDBG_BITVAL(22)
-#define PPCDBG_RTAS PPCDBG_BITVAL(23)
-#define PPCDBG_HTABSTRESS PPCDBG_BITVAL(62)
-#define PPCDBG_HTABSIZE PPCDBG_BITVAL(63)
-#define PPCDBG_NONE (0UL)
-#define PPCDBG_ALL (0xffffffffUL)
-
-/* The default initial value for the debug switch */
-#define PPC_DEBUG_DEFAULT 0
-/* #define PPC_DEBUG_DEFAULT PPCDBG_ALL */
-
-#define PPCDBG_NUM_FLAGS 64
-
-extern u64 ppc64_debug_switch;
-
-#ifdef WANT_PPCDBG_TAB
-/* A table of debug switch names to allow name lookup in xmon
- * (and whoever else wants it.
- */
-char *trace_names[PPCDBG_NUM_FLAGS] = {
- /* Known debug names */
- "mminit", "mm",
- "syscall32", "syscall32_ni", "syscall32x", "syscall32m",
- "syscall64", "syscall64_ni", "syscall64x",
- "signal", "signal_xmon",
- "binfmt32", "binfmt64", "binfmt_xmon", "binfmt_32addr",
- "alignfixup", "tceinit", "tce", "phb_init",
- "smp", "boot", "buswalk", "prom",
- "rtas"
-};
-#else
-extern char *trace_names[64];
-#endif /* WANT_PPCDBG_TAB */
-
-#ifdef CONFIG_PPCDBG
-/* Macro to conditionally print debug based on debug_switch */
-#define PPCDBG(...) udbg_ppcdbg(__VA_ARGS__)
-
-/* Macro to conditionally call a debug routine based on debug_switch */
-#define PPCDBGCALL(FLAGS,FUNCTION) ifppcdebug(FLAGS) FUNCTION
-
-/* Macros to test for debug states */
-#define ifppcdebug(FLAGS) if (udbg_ifdebug(FLAGS))
-#define ppcdebugset(FLAGS) (udbg_ifdebug(FLAGS))
-#define PPCDBG_BINFMT (test_thread_flag(TIF_32BIT) ? PPCDBG_BINFMT32 : PPCDBG_BINFMT64)
-
-#else
-#define PPCDBG(...) do {;} while (0)
-#define PPCDBGCALL(FLAGS,FUNCTION) do {;} while (0)
-#define ifppcdebug(...) if (0)
-#define ppcdebugset(FLAGS) (0)
-#endif /* CONFIG_PPCDBG */
-
-#endif /*__PPCDEBUG_H */
diff --git a/include/asm-ppc64/prom.h b/include/asm-ppc64/prom.h
index bdb47174ff0e..76bb0266d67c 100644
--- a/include/asm-ppc64/prom.h
+++ b/include/asm-ppc64/prom.h
@@ -213,6 +213,6 @@ extern int prom_n_addr_cells(struct device_node* np);
extern int prom_n_size_cells(struct device_node* np);
extern int prom_n_intr_cells(struct device_node* np);
extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
-extern void prom_add_property(struct device_node* np, struct property* prop);
+extern int prom_add_property(struct device_node* np, struct property* prop);
#endif /* _PPC64_PROM_H */
diff --git a/include/asm-ppc64/udbg.h b/include/asm-ppc64/udbg.h
index 8192fb8541cc..e3b927991851 100644
--- a/include/asm-ppc64/udbg.h
+++ b/include/asm-ppc64/udbg.h
@@ -23,9 +23,6 @@ extern int udbg_read(char *buf, int buflen);
extern void register_early_udbg_console(void);
extern void udbg_printf(const char *fmt, ...);
-extern void udbg_ppcdbg(unsigned long flags, const char *fmt, ...);
-extern unsigned long udbg_ifdebug(unsigned long flags);
-extern void __init ppcdbg_initialize(void);
extern void udbg_init_uart(void __iomem *comport, unsigned int speed);
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index 0563581e3a02..65ceeaa30652 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -139,15 +139,12 @@ extern void proc_tty_unregister_driver(struct tty_driver *driver);
/*
* proc_devtree.c
*/
+#ifdef CONFIG_PROC_DEVICETREE
struct device_node;
+struct property;
extern void proc_device_tree_init(void);
-#ifdef CONFIG_PROC_DEVICETREE
extern void proc_device_tree_add_node(struct device_node *, struct proc_dir_entry *);
-#else /* !CONFIG_PROC_DEVICETREE */
-static inline void proc_device_tree_add_node(struct device_node *np, struct proc_dir_entry *pde)
-{
- return;
-}
+extern void proc_device_tree_add_prop(struct proc_dir_entry *pde, struct property *prop);
#endif /* CONFIG_PROC_DEVICETREE */
extern struct proc_dir_entry *proc_symlink(const char *,