summaryrefslogtreecommitdiffstats
path: root/Documentation/ABI/testing/debugfs-driver-habanalabs
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/ABI/testing/debugfs-driver-habanalabs')
-rw-r--r--Documentation/ABI/testing/debugfs-driver-habanalabs126
1 files changed, 126 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs
new file mode 100644
index 000000000000..2f5b80be07a3
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-driver-habanalabs
@@ -0,0 +1,126 @@
+What: /sys/kernel/debug/habanalabs/hl<n>/addr
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Sets the device address to be used for read or write through
+ PCI bar. The acceptable value is a string that starts with "0x"
+
+What: /sys/kernel/debug/habanalabs/hl<n>/command_buffers
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Displays a list with information about the currently allocated
+ command buffers
+
+What: /sys/kernel/debug/habanalabs/hl<n>/command_submission
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Displays a list with information about the currently active
+ command submissions
+
+What: /sys/kernel/debug/habanalabs/hl<n>/command_submission_jobs
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Displays a list with detailed information about each JOB (CB) of
+ each active command submission
+
+What: /sys/kernel/debug/habanalabs/hl<n>/data32
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Allows the root user to read or write directly through the
+ device's PCI bar. Writing to this file generates a write
+ transaction while reading from the file generates a read
+ transcation. This custom interface is needed (instead of using
+ the generic Linux user-space PCI mapping) because the DDR bar
+ is very small compared to the DDR memory and only the driver can
+ move the bar before and after the transaction
+
+What: /sys/kernel/debug/habanalabs/hl<n>/device
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Enables the root user to set the device to specific state.
+ Valid values are "disable", "enable", "suspend", "resume".
+ User can read this property to see the valid values
+
+What: /sys/kernel/debug/habanalabs/hl<n>/i2c_addr
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Sets I2C device address for I2C transaction that is generated
+ by the device's CPU
+
+What: /sys/kernel/debug/habanalabs/hl<n>/i2c_bus
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Sets I2C bus address for I2C transaction that is generated by
+ the device's CPU
+
+What: /sys/kernel/debug/habanalabs/hl<n>/i2c_data
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Triggers an I2C transaction that is generated by the device's
+ CPU. Writing to this file generates a write transaction while
+ reading from the file generates a read transcation
+
+What: /sys/kernel/debug/habanalabs/hl<n>/i2c_reg
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Sets I2C register id for I2C transaction that is generated by
+ the device's CPU
+
+What: /sys/kernel/debug/habanalabs/hl<n>/led0
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Sets the state of the first S/W led on the device
+
+What: /sys/kernel/debug/habanalabs/hl<n>/led1
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Sets the state of the second S/W led on the device
+
+What: /sys/kernel/debug/habanalabs/hl<n>/led2
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Sets the state of the third S/W led on the device
+
+What: /sys/kernel/debug/habanalabs/hl<n>/mmu
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Displays the hop values and physical address for a given ASID
+ and virtual address. The user should write the ASID and VA into
+ the file and then read the file to get the result.
+ e.g. to display info about VA 0x1000 for ASID 1 you need to do:
+ echo "1 0x1000" > /sys/kernel/debug/habanalabs/hl0/mmu
+
+What: /sys/kernel/debug/habanalabs/hl<n>/set_power_state
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Sets the PCI power state. Valid values are "1" for D0 and "2"
+ for D3Hot
+
+What: /sys/kernel/debug/habanalabs/hl<n>/userptr
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Displays a list with information about the currently user
+ pointers (user virtual addresses) that are pinned and mapped
+ to DMA addresses
+
+What: /sys/kernel/debug/habanalabs/hl<n>/vm
+Date: Jan 2019
+KernelVersion: 5.1
+Contact: oded.gabbay@gmail.com
+Description: Displays a list with information about all the active virtual
+ address mappings per ASID