summaryrefslogtreecommitdiffstats
path: root/Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt')
-rw-r--r--Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt42
1 files changed, 0 insertions, 42 deletions
diff --git a/Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt b/Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt
deleted file mode 100644
index 441959846e1a..000000000000
--- a/Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-ROM-able zImage boot from eSD
------------------------------
-
-An ROM-able zImage compiled with ZBOOT_ROM_SDHI may be written to eSD and
-SuperH Mobile ARM will to boot directly from the SDHI hardware block.
-
-This is achieved by the mask ROM loading the first portion of the image into
-MERAM and then jumping to it. This portion contains loader code which
-copies the entire image to SDRAM and jumps to it. From there the zImage
-boot code proceeds as normal, uncompressing the image into its final
-location and then jumping to it.
-
-This code has been tested on an mackerel board using the developer 1A eSD
-boot mode which is configured using the following jumper settings.
-
- 8 7 6 5 4 3 2 1
- x|x|x|x| |x|x|
-S4 -+-+-+-+-+-+-+-
- | | | |x| | |x on
-
-The eSD card needs to be present in SDHI slot 1 (CN7).
-As such S1 and S33 also need to be configured as per
-the notes in arch/arm/mach-shmobile/board-mackerel.c.
-
-A partial zImage must be written to physical partition #1 (boot)
-of the eSD at sector 0 in vrl4 format. A utility vrl4 is supplied to
-accomplish this.
-
-e.g.
- vrl4 < zImage | dd of=/dev/sdX bs=512 count=17
-
-A full copy of _the same_ zImage should be written to physical partition #1
-(boot) of the eSD at sector 0. This should _not_ be in vrl4 format.
-
- vrl4 < zImage | dd of=/dev/sdX bs=512
-
-Note: The commands above assume that the physical partition has been
-switched. No such facility currently exists in the Linux Kernel.
-
-Physical partitions are described in the eSD specification. At the time of
-writing they are not the same as partitions that are typically configured
-using fdisk and visible through /proc/partitions