summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt7
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt39
-rw-r--r--Documentation/devicetree/bindings/arm/compulab-boards.txt25
-rw-r--r--Documentation/devicetree/bindings/arm/cpus.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/marvell,kirkwood.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek.txt4
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/omap/omap.txt18
-rw-r--r--Documentation/devicetree/bindings/arm/rockchip.txt22
-rw-r--r--Documentation/devicetree/bindings/arm/scu.txt3
-rw-r--r--Documentation/devicetree/bindings/arm/technologic.txt6
-rw-r--r--Documentation/devicetree/bindings/clock/arm-syscon-icst.txt40
-rw-r--r--Documentation/devicetree/bindings/clock/dove-divider-clock.txt28
-rw-r--r--Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt7
-rw-r--r--Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt4
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt1
-rw-r--r--Documentation/devicetree/bindings/regulator/tps65217.txt10
-rw-r--r--Documentation/devicetree/bindings/serial/mtk-uart.txt14
-rw-r--r--Documentation/devicetree/bindings/soc/dove/pmu.txt56
-rw-r--r--Documentation/devicetree/bindings/soc/mediatek/scpsys.txt12
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt104
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt104
-rw-r--r--Documentation/devicetree/bindings/spi/ti_qspi.txt22
-rw-r--r--Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt1
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt3
-rw-r--r--Documentation/devicetree/bindings/watchdog/meson-wdt.txt (renamed from Documentation/devicetree/bindings/watchdog/meson6-wdt.txt)2
-rw-r--r--Documentation/devicetree/bindings/watchdog/mtk-wdt.txt6
28 files changed, 528 insertions, 17 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
index 6b0f49f6f499..8608a776caa7 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
@@ -5,4 +5,11 @@ Boards with the BCM4708 SoC shall have the following properties:
Required root node property:
+bcm4708
compatible = "brcm,bcm4708";
+
+bcm4709
+compatible = "brcm,bcm4709";
+
+bcm53012
+compatible = "brcm,bcm53012";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
new file mode 100644
index 000000000000..677ef9d9f445
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
@@ -0,0 +1,39 @@
+Broadcom Northstar Plus SoC CPU Enable Method
+---------------------------------------------
+This binding defines the enable method used for starting secondary
+CPU in the following Broadcom SoCs:
+ BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
+
+The enable method is specified by defining the following required
+properties in the corresponding secondary "cpu" device tree node:
+ - enable-method = "brcm,bcm-nsp-smp";
+ - secondary-boot-reg = <...>;
+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register which should hold the common
+entry point for a secondary CPU. This entry is cpu node specific
+and should be added per cpu. E.g., in case of NSP (BCM58625) which
+is a dual core CPU SoC, this entry should be added to cpu1 node.
+
+
+Example:
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ enable-method = "brcm,bcm-nsp-smp";
+ secondary-boot-reg = <0xffff042c>;
+ reg = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/arm/compulab-boards.txt b/Documentation/devicetree/bindings/arm/compulab-boards.txt
new file mode 100644
index 000000000000..42a10285af9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/compulab-boards.txt
@@ -0,0 +1,25 @@
+CompuLab SB-SOM is a multi-module baseboard capable of carrying:
+ - CM-T43
+ - CM-T54
+ - CM-QS600
+ - CL-SOM-AM57x
+ - CL-SOM-iMX7
+modules with minor modifications to the SB-SOM assembly.
+
+Required root node properties:
+ - compatible = should be "compulab,sb-som"
+
+Compulab CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on
+Freescale i.MX7 ARM Cortex-A7 System-on-Chip.
+
+Required root node properties:
+ - compatible = "compulab,cl-som-imx7", "fsl,imx7d";
+
+Compulab SBC-iMX7 is a single board computer based on the
+Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with
+the CL-SOM-iMX7 System-on-Module providing most of the functions,
+and SB-SOM-iMX7 carrier board providing additional peripheral
+functions and connectors.
+
+Required root node properties:
+ - compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 9bddd9fc7b5a..ae9be074d09f 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -192,6 +192,7 @@ nodes to be present and contain the properties described below.
"allwinner,sun8i-a23"
"arm,psci"
"arm,realview-smp"
+ "brcm,bcm-nsp-smp"
"brcm,brahma-b15"
"marvell,armada-375-smp"
"marvell,armada-380-smp"
diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
index 5171ad8f48ff..ab0c9cdf388e 100644
--- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
+++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
@@ -24,6 +24,8 @@ board. Currently known boards are:
"buffalo,lswxl"
"buffalo,lsxhl"
"buffalo,lsxl"
+"cloudengines,pogo02"
+"cloudengines,pogoplugv4"
"dlink,dns-320"
"dlink,dns-320-a1"
"dlink,dns-325"
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index 618a91994a18..54f43bc2df44 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -6,6 +6,7 @@ following property:
Required root node property:
compatible: Must contain one of
+ "mediatek,mt2701"
"mediatek,mt6580"
"mediatek,mt6589"
"mediatek,mt6592"
@@ -17,6 +18,9 @@ compatible: Must contain one of
Supported boards:
+- Evaluation board for MT2701:
+ Required root node properties:
+ - compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
- Evaluation board for MT6580:
Required root node properties:
- compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
index f6cd3e4192ff..aaf8d1460c4d 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
@@ -18,7 +18,7 @@ The available clocks are defined in dt-bindings/clock/mt*-clk.h.
Also it uses the common reset controller binding from
Documentation/devicetree/bindings/reset/reset.txt.
The available reset outputs are defined in
-dt-bindings/reset-controller/mt*-resets.h
+dt-bindings/reset/mt*-resets.h
Example:
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
index f25b85499a6f..2f6ff86df49f 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
@@ -18,7 +18,7 @@ The available clocks are defined in dt-bindings/clock/mt*-clk.h.
Also it uses the common reset controller binding from
Documentation/devicetree/bindings/reset/reset.txt.
The available reset outputs are defined in
-dt-bindings/reset-controller/mt*-resets.h
+dt-bindings/reset/mt*-resets.h
Example:
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 9f4e5136e568..a2bd593881ca 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -138,9 +138,21 @@ Boards:
- AM335X phyBOARD-WEGA: Single Board Computer dev kit
compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"
+- AM335X CM-T335 : System On Module, built around the Sitara AM3352/4
+ compatible = "compulab,cm-t335", "ti,am33xx"
+
+- AM335X SBC-T335 : single board computer, built around the Sitara AM3352/4
+ compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx"
+
- OMAP5 EVM : Evaluation Module
compatible = "ti,omap5-evm", "ti,omap5"
+- AM437x CM-T43
+ compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43"
+
+- AM437x SBC-T43
+ compatible = "compulab,am437x-sbc-t43", "compulab,am437x-cm-t43", "ti,am4372", "ti,am43"
+
- AM43x EPOS EVM
compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43"
@@ -150,6 +162,12 @@ Boards:
- AM437x SK EVM: AM437x StarterKit Evaluation Module
compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43"
+- AM57XX CL-SOM-AM57x
+ compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- AM57XX SBC-AM57x
+ compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+
- DRA742 EVM: Software Development Board for DRA742
compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 8e985dd2f181..c980b2b81227 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -1,6 +1,10 @@
Rockchip platforms device tree bindings
---------------------------------------
+- Kylin RK3036 board:
+ Required root node properties:
+ - compatible = "rockchip,kylin-rk3036", "rockchip,rk3036";
+
- MarsBoard RK3066 board:
Required root node properties:
- compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
@@ -35,6 +39,11 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "netxeon,r89", "rockchip,rk3288";
+- Google Brain (dev-board):
+ Required root node properties:
+ - compatible = "google,veyron-brain-rev0", "google,veyron-brain",
+ "google,veyron", "rockchip,rk3288";
+
- Google Jaq (Haier Chromebook 11 and more):
Required root node properties:
- compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
@@ -49,6 +58,15 @@ Rockchip platforms device tree bindings
"google,veyron-jerry-rev3", "google,veyron-jerry",
"google,veyron", "rockchip,rk3288";
+- Google Mickey (Asus Chromebit CS10):
+ Required root node properties:
+ - compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
+ "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
+ "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
+ "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
+ "google,veyron-mickey-rev0", "google,veyron-mickey",
+ "google,veyron", "rockchip,rk3288";
+
- Google Minnie (Asus Chromebook Flip C100P):
Required root node properties:
- compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
@@ -72,3 +90,7 @@ Rockchip platforms device tree bindings
- Rockchip R88 board:
Required root node properties:
- compatible = "rockchip,r88", "rockchip,rk3368";
+
+- Rockchip RK3228 Evaluation board:
+ Required root node properties:
+ - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
diff --git a/Documentation/devicetree/bindings/arm/scu.txt b/Documentation/devicetree/bindings/arm/scu.txt
index c447680519bb..08a587875996 100644
--- a/Documentation/devicetree/bindings/arm/scu.txt
+++ b/Documentation/devicetree/bindings/arm/scu.txt
@@ -10,10 +10,13 @@ References:
Revision r2p0
- Cortex-A5: see DDI0434B Cortex-A5 MPCore Technical Reference Manual
Revision r0p1
+- ARM11 MPCore: see DDI0360F ARM 11 MPCore Processor Technical Reference
+ Manial Revision r2p0
- compatible : Should be:
"arm,cortex-a9-scu"
"arm,cortex-a5-scu"
+ "arm,arm11mp-scu"
- reg : Specify the base address and the size of the SCU register window.
diff --git a/Documentation/devicetree/bindings/arm/technologic.txt b/Documentation/devicetree/bindings/arm/technologic.txt
new file mode 100644
index 000000000000..842298894cf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/technologic.txt
@@ -0,0 +1,6 @@
+Technologic Systems Platforms Device Tree Bindings
+--------------------------------------------------
+
+TS-4800 board
+Required root node properties:
+ - compatible = "technologic,imx51-ts4800", "fsl,imx51";
diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
new file mode 100644
index 000000000000..8b7177cecb36
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
@@ -0,0 +1,40 @@
+ARM System Controller ICST clocks
+
+The ICS525 and ICS307 oscillators are produced by Integrated Devices
+Technology (IDT). ARM integrated these oscillators deeply into their
+reference designs by adding special control registers that manage such
+oscillators to their system controllers.
+
+The ARM system controller contains logic to serialize and initialize
+an ICST clock request after a write to the 32 bit register at an offset
+into the system controller. Furthermore, to even be able to alter one of
+these frequencies, the system controller must first be unlocked by
+writing a special token to another offset in the system controller.
+
+The ICST oscillator must be provided inside a system controller node.
+
+Required properties:
+- lock-offset: the offset address into the system controller where the
+ unlocking register is located
+- vco-offset: the offset address into the system controller where the
+ ICST control register is located (even 32 bit address)
+- compatible: must be one of "arm,syscon-icst525" or "arm,syscon-icst307"
+- #clock-cells: must be <0>
+- clocks: parent clock, since the ICST needs a parent clock to derive its
+ frequency from, this attribute is compulsory.
+
+Example:
+
+syscon: syscon@10000000 {
+ compatible = "syscon";
+ reg = <0x10000000 0x1000>;
+
+ oscclk0: osc0@0c {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x0c>;
+ clocks = <&xtal24mhz>;
+ };
+ (...)
+};
diff --git a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
new file mode 100644
index 000000000000..e3eb0f657c5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
@@ -0,0 +1,28 @@
+PLL divider based Dove clocks
+
+Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide
+high speed clocks for a number of peripherals. These dividers are part of
+the PMU, and thus this node should be a child of the PMU node.
+
+The following clocks are provided:
+
+ID Clock
+-------------
+0 AXI bus clock
+1 GPU clock
+2 VMeta clock
+3 LCD clock
+
+Required properties:
+- compatible : shall be "marvell,dove-divider-clock"
+- reg : shall be the register address of the Core PLL and Clock Divider
+ Control 0 register. This will cover that register, as well as the
+ Core PLL and Clock Divider Control 1 register. Thus, it will have
+ a size of 8.
+- #clock-cells : from common clock binding; shall be set to 1
+
+divider_clk: core-clock@0064 {
+ compatible = "marvell,dove-divider-clock";
+ reg = <0x0064 0x8>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
index 1fd8cf9cbfac..d474f59be6d6 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
@@ -2,10 +2,9 @@ Device-Tree bindings for drm hdmi driver
Required properties:
- compatible: value should be one among the following:
- 1) "samsung,exynos5-hdmi" <DEPRECATED>
- 2) "samsung,exynos4210-hdmi"
- 3) "samsung,exynos4212-hdmi"
- 4) "samsung,exynos5420-hdmi"
+ 1) "samsung,exynos4210-hdmi"
+ 2) "samsung,exynos4212-hdmi"
+ 3) "samsung,exynos5420-hdmi"
- reg: physical base address of the hdmi and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
diff --git a/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt b/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt
new file mode 100644
index 000000000000..70cd8d18d841
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt
@@ -0,0 +1,4 @@
+Startek Electronic Technology Co. KD050C 5.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "startek,startek-kd050c"
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
index afef6a85ac51..b8e1674c7837 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
@@ -14,6 +14,7 @@ Required properties:
"mediatek,mt6582-sysirq"
"mediatek,mt6580-sysirq"
"mediatek,mt6577-sysirq"
+ "mediatek,mt2701-sysirq"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Use the same format as specified by GIC in
Documentation/devicetree/bindings/arm/gic.txt
diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt
index 4f05d208c95c..d18109657da6 100644
--- a/Documentation/devicetree/bindings/regulator/tps65217.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65217.txt
@@ -26,7 +26,11 @@ Example:
ti,pmic-shutdown-controller;
regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dcdc1_reg: dcdc1 {
+ reg = <0>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -34,6 +38,7 @@ Example:
};
dcdc2_reg: dcdc2 {
+ reg = <1>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -41,6 +46,7 @@ Example:
};
dcdc3_reg: dcc3 {
+ reg = <2>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
@@ -48,6 +54,7 @@ Example:
};
ldo1_reg: ldo1 {
+ reg = <3>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -55,6 +62,7 @@ Example:
};
ldo2_reg: ldo2 {
+ reg = <4>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -62,6 +70,7 @@ Example:
};
ldo3_reg: ldo3 {
+ reg = <5>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -69,6 +78,7 @@ Example:
};
ldo4_reg: ldo4 {
+ reg = <6>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
index 2d47add34765..a833a016f656 100644
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -2,15 +2,15 @@
Required properties:
- compatible should contain:
- * "mediatek,mt8135-uart" for MT8135 compatible UARTS
+ * "mediatek,mt2701-uart" for MT2701 compatible UARTS
+ * "mediatek,mt6580-uart" for MT6580 compatible UARTS
+ * "mediatek,mt6582-uart" for MT6582 compatible UARTS
+ * "mediatek,mt6589-uart" for MT6589 compatible UARTS
+ * "mediatek,mt6795-uart" for MT6795 compatible UARTS
* "mediatek,mt8127-uart" for MT8127 compatible UARTS
+ * "mediatek,mt8135-uart" for MT8135 compatible UARTS
* "mediatek,mt8173-uart" for MT8173 compatible UARTS
- * "mediatek,mt6795-uart" for MT6795 compatible UARTS
- * "mediatek,mt6589-uart" for MT6589 compatible UARTS
- * "mediatek,mt6582-uart" for MT6582 compatible UARTS
- * "mediatek,mt6580-uart" for MT6580 compatible UARTS
- * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6795,
- MT6589, MT6582, MT6580, MT6577)
+ * "mediatek,mt6577-uart" for MT6577 and all of the above
- reg: The base address of the UART register bank.
diff --git a/Documentation/devicetree/bindings/soc/dove/pmu.txt b/Documentation/devicetree/bindings/soc/dove/pmu.txt
new file mode 100644
index 000000000000..edd40b796b74
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/dove/pmu.txt
@@ -0,0 +1,56 @@
+Device Tree bindings for Marvell PMU
+
+Required properties:
+ - compatible: value should be "marvell,dove-pmu".
+ May also include "simple-bus" if there are child devices, in which
+ case the ranges node is required.
+ - reg: two base addresses and sizes of the PM controller and PMU.
+ - interrupts: single interrupt number for the PMU interrupt
+ - interrupt-controller: must be specified as the PMU itself is an
+ interrupt controller.
+ - #interrupt-cells: must be 1.
+ - #reset-cells: must be 1.
+ - domains: sub-node containing domain descriptions
+
+Optional properties:
+ - ranges: defines the address mapping for child devices, as per the
+ standard property of this name. Required when compatible includes
+ "simple-bus".
+
+Power domain descriptions are listed as child nodes of the "domains"
+sub-node. Each domain has the following properties:
+
+Required properties:
+ - #power-domain-cells: must be 0.
+
+Optional properties:
+ - marvell,pmu_pwr_mask: specifies the mask value for PMU power register
+ - marvell,pmu_iso_mask: specifies the mask value for PMU isolation register
+ - resets: points to the reset manager (PMU node) and reset index.
+
+Example:
+
+ pmu: power-management@d0000 {
+ compatible = "marvell,dove-pmu";
+ reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
+ interrupts = <33>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #reset-cells = <1>;
+
+ domains {
+ vpu_domain: vpu-domain {
+ #power-domain-cells = <0>;
+ marvell,pmu_pwr_mask = <0x00000008>;
+ marvell,pmu_iso_mask = <0x00000001>;
+ resets = <&pmu 16>;
+ };
+
+ gpu_domain: gpu-domain {
+ #power-domain-cells = <0>;
+ marvell,pmu_pwr_mask = <0x00000004>;
+ marvell,pmu_iso_mask = <0x00000002>;
+ resets = <&pmu 18>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
index a6c8afc8385a..e8f15e34027f 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -21,6 +21,18 @@ Required properties:
These are the clocks which hardware needs to be enabled
before enabling certain power domains.
+Optional properties:
+- vdec-supply: Power supply for the vdec power domain
+- venc-supply: Power supply for the venc power domain
+- isp-supply: Power supply for the isp power domain
+- mm-supply: Power supply for the mm power domain
+- venc_lt-supply: Power supply for the venc_lt power domain
+- audio-supply: Power supply for the audio power domain
+- usb-supply: Power supply for the usb power domain
+- mfg_async-supply: Power supply for the mfg_async power domain
+- mfg_2d-supply: Power supply for the mfg_2d power domain
+- mfg-supply: Power supply for the mfg power domain
+
Example:
scpsys: scpsys@10006000 {
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
new file mode 100644
index 000000000000..5cc82b8353d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
@@ -0,0 +1,104 @@
+Qualcomm Shared Memory Point 2 Point binding
+
+The Shared Memory Point to Point (SMP2P) protocol facilitates communication of
+a single 32-bit value between two processors. Each value has a single writer
+(the local side) and a single reader (the remote side). Values are uniquely
+identified in the system by the directed edge (local processor ID to remote
+processor ID) and a string identifier.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,smp2p"
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: one entry specifying the smp2p notification interrupt
+
+- qcom,ipc:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the outgoing ipc bit used for
+ signaling the remote end of the smp2p edge:
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+- qcom,smem:
+ Usage: required
+ Value type: <u32 array>
+ Definition: two identifiers of the inbound and outbound smem items used
+ for this edge
+
+- qcom,local-pid:
+ Usage: required
+ Value type: <u32>
+ Definition: specifies the identfier of the local endpoint of this edge
+
+- qcom,remote-pid:
+ Usage: required
+ Value type: <u32>
+ Definition: specifies the identfier of the remote endpoint of this edge
+
+= SUBNODES
+Each SMP2P pair contain a set of inbound and outbound entries, these are
+described in subnodes of the smp2p device node. The node names are not
+important.
+
+- qcom,entry-name:
+ Usage: required
+ Value type: <string>
+ Definition: specifies the name of this entry, for inbound entries this
+ will be used to match against the remotely allocated entry
+ and for outbound entries this name is used for allocating
+ entries
+
+- interrupt-controller:
+ Usage: required for incoming entries
+ Value type: <empty>
+ Definition: marks the entry as inbound; the node should be specified
+ as a two cell interrupt-controller as defined in
+ "../interrupt-controller/interrupts.txt"
+ If not specified this node will denote the outgoing entry
+
+- #interrupt-cells:
+ Usage: required for incoming entries
+ Value type: <u32>
+ Definition: must be 2 - denoting the bit in the entry and IRQ flags
+
+- #qcom,state-cells:
+ Usage: required for outgoing entries
+ Value type: <u32>
+ Definition: must be 1 - denoting the bit in the entry
+
+= EXAMPLE
+The following example shows the SMP2P setup with the wireless processor,
+defined from the 8974 apps processor's point-of-view. It encompasses one
+inbound and one outbound entry:
+
+wcnss-smp2p {
+ compatible = "qcom,smp2p";
+ qcom,smem = <431>, <451>;
+
+ interrupts = <0 143 1>;
+
+ qcom,ipc = <&apcs 8 18>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <4>;
+
+ wcnss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+
+ #qcom,state-cells = <1>;
+ };
+
+ wcnss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
new file mode 100644
index 000000000000..a6634c70850d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
@@ -0,0 +1,104 @@
+Qualcomm Shared Memory State Machine
+
+The Shared Memory State Machine facilitates broadcasting of single bit state
+information between the processors in a Qualcomm SoC. Each processor is
+assigned 32 bits of state that can be modified. A processor can through a
+matrix of bitmaps signal subscription of notifications upon changes to a
+certain bit owned by a certain remote processor.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,smsm"
+
+- qcom,ipc-N:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the outgoing ipc bit used for
+ signaling the N:th remote processor
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+- qcom,local-host:
+ Usage: optional
+ Value type: <u32>
+ Definition: identifier of the local processor in the list of hosts, or
+ in other words specifier of the column in the subscription
+ matrix representing the local processor
+ defaults to host 0
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 0
+
+= SUBNODES
+Each processor's state bits are described by a subnode of the smsm device node.
+Nodes can either be flagged as an interrupt-controller to denote a remote
+processor's state bits or the local processors bits. The node names are not
+important.
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: specifies the offset, in words, of the first bit for this
+ entry
+
+- #qcom,state-cells:
+ Usage: required for local entry
+ Value type: <u32>
+ Definition: must be 1 - denotes bit number
+
+- interrupt-controller:
+ Usage: required for remote entries
+ Value type: <empty>
+ Definition: marks the entry as a interrupt-controller and the state bits
+ to belong to a remote processor
+
+- #interrupt-cells:
+ Usage: required for remote entries
+ Value type: <u32>
+ Definition: must be 2 - denotes bit number and IRQ flags
+
+- interrupts:
+ Usage: required for remote entries
+ Value type: <prop-encoded-array>
+ Definition: one entry specifying remote IRQ used by the remote processor
+ to signal changes of its state bits
+
+
+= EXAMPLE
+The following example shows the SMEM setup for controlling properties of the
+wireless processor, defined from the 8974 apps processor's point-of-view. It
+encompasses one outbound entry and the outgoing interrupt for the wireless
+processor.
+
+smsm {
+ compatible = "qcom,smsm";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ qcom,ipc-3 = <&apcs 8 19>;
+
+ apps_smsm: apps@0 {
+ reg = <0>;
+
+ #qcom,state-cells = <1>;
+ };
+
+ wcnss_smsm: wcnss@7 {
+ reg = <7>;
+ interrupts = <0 144 1>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/spi/ti_qspi.txt b/Documentation/devicetree/bindings/spi/ti_qspi.txt
index 601a360531a5..cc8304aa64ac 100644
--- a/Documentation/devicetree/bindings/spi/ti_qspi.txt
+++ b/Documentation/devicetree/bindings/spi/ti_qspi.txt
@@ -15,14 +15,32 @@ Recommended properties:
- spi-max-frequency: Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
+Optional properties:
+- syscon-chipselects: Handle to system control region contains QSPI
+ chipselect register and offset of that register.
+
Example:
+For am4372:
qspi: qspi@4b300000 {
- compatible = "ti,dra7xxx-qspi";
- reg = <0x47900000 0x100>, <0x30000000 0x3ffffff>;
+ compatible = "ti,am4372-qspi";
+ reg = <0x47900000 0x100>, <0x30000000 0x4000000>;
reg-names = "qspi_base", "qspi_mmap";
#address-cells = <1>;
#size-cells = <0>;
spi-max-frequency = <25000000>;
ti,hwmods = "qspi";
};
+
+For dra7xx:
+qspi: qspi@4b300000 {
+ compatible = "ti,dra7xxx-qspi";
+ reg = <0x4b300000 0x100>,
+ <0x5c000000 0x4000000>,
+ reg-names = "qspi_base", "qspi_mmap";
+ syscon-chipselects = <&scm_conf 0x558>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <48000000>;
+ ti,hwmods = "qspi";
+};
diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
index 64083bc5633c..8ff54eb464dc 100644
--- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
+++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
@@ -3,6 +3,7 @@ Mediatek MT6577, MT6572 and MT6589 Timers
Required properties:
- compatible should contain:
+ * "mediatek,mt2701-timer" for MT2701 compatible timers
* "mediatek,mt6580-timer" for MT6580 compatible timers
* "mediatek,mt6589-timer" for MT6589 compatible timers
* "mediatek,mt8127-timer" for MT8127 compatible timers
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 084439d35747..72e2c5a2b327 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -124,6 +124,7 @@ jedec JEDEC Solid State Technology Association
karo Ka-Ro electronics GmbH
keymile Keymile GmbH
kinetic Kinetic Technologies
+kosagi Sutajio Ko-Usagi PTE Ltd.
kyo Kyocera Corporation
lacie LaCie
lantiq Lantiq Semiconductor
@@ -222,11 +223,13 @@ sony Sony Corporation
spansion Spansion Inc.
sprd Spreadtrum Communications Inc.
st STMicroelectronics
+startek Startek
ste ST-Ericsson
stericsson ST-Ericsson
synology Synology, Inc.
tbs TBS Technologies
tcl Toby Churchill Ltd.
+technologic Technologic Systems
thine THine Electronics, Inc.
ti Texas Instruments
tlm Trusted Logic Mobility
diff --git a/Documentation/devicetree/bindings/watchdog/meson6-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
index 9200fc2d508c..ae70185d96e6 100644
--- a/Documentation/devicetree/bindings/watchdog/meson6-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
@@ -2,7 +2,7 @@ Meson SoCs Watchdog timer
Required properties:
-- compatible : should be "amlogic,meson6-wdt"
+- compatible : should be "amlogic,meson6-wdt" or "amlogic,meson8b-wdt"
- reg : Specifies base physical address and size of the registers.
Example:
diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index af9eb5b8a253..6a00939a059a 100644
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
@@ -2,7 +2,11 @@ Mediatek SoCs Watchdog timer
Required properties:
-- compatible : should be "mediatek,mt6589-wdt"
+- compatible should contain:
+ * "mediatek,mt2701-wdt" for MT2701 compatible watchdog timers
+ * "mediatek,mt6589-wdt" for all compatible watchdog timers (MT2701,
+ MT6589)
+
- reg : Specifies base physical address and size of the registers.
Example: