summaryrefslogtreecommitdiffstats
path: root/Documentation/fb/sh7760fb.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/fb/sh7760fb.txt')
-rw-r--r--Documentation/fb/sh7760fb.txt131
1 files changed, 0 insertions, 131 deletions
diff --git a/Documentation/fb/sh7760fb.txt b/Documentation/fb/sh7760fb.txt
deleted file mode 100644
index b994c3b10549..000000000000
--- a/Documentation/fb/sh7760fb.txt
+++ /dev/null
@@ -1,131 +0,0 @@
-SH7760/SH7763 integrated LCDC Framebuffer driver
-================================================
-
-0. Overview
------------
-The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which
-supports (in theory) resolutions ranging from 1x1 to 1024x1024,
-with color depths ranging from 1 to 16 bits, on STN, DSTN and TFT Panels.
-
-Caveats:
-* Framebuffer memory must be a large chunk allocated at the top
- of Area3 (HW requirement). Because of this requirement you should NOT
- make the driver a module since at runtime it may become impossible to
- get a large enough contiguous chunk of memory.
-
-* The driver does not support changing resolution while loaded
- (displays aren't hotpluggable anyway)
-
-* Heavy flickering may be observed
- a) if you're using 15/16bit color modes at >= 640x480 px resolutions,
- b) during PCMCIA (or any other slow bus) activity.
-
-* Rotation works only 90degress clockwise, and only if horizontal
- resolution is <= 320 pixels.
-
-files: drivers/video/sh7760fb.c
- include/asm-sh/sh7760fb.h
- Documentation/fb/sh7760fb.txt
-
-1. Platform setup
------------------
-SH7760:
- Video data is fetched via the DMABRG DMA engine, so you have to
- configure the SH DMAC for DMABRG mode (write 0x94808080 to the
- DMARSRA register somewhere at boot).
-
- PFC registers PCCR and PCDR must be set to peripheral mode.
- (write zeros to both).
-
-The driver does NOT do the above for you since board setup is, well, job
-of the board setup code.
-
-2. Panel definitions
---------------------
-The LCDC must explicitly be told about the type of LCD panel
-attached. Data must be wrapped in a "struct sh7760fb_platdata" and
-passed to the driver as platform_data.
-
-Suggest you take a closer look at the SH7760 Manual, Section 30.
-(http://documentation.renesas.com/eng/products/mpumcu/e602291_sh7760.pdf)
-
-The following code illustrates what needs to be done to
-get the framebuffer working on a 640x480 TFT:
-
-====================== cut here ======================================
-
-#include <linux/fb.h>
-#include <asm/sh7760fb.h>
-
-/*
- * NEC NL6440bc26-01 640x480 TFT
- * dotclock 25175 kHz
- * Xres 640 Yres 480
- * Htotal 800 Vtotal 525
- * HsynStart 656 VsynStart 490
- * HsynLenn 30 VsynLenn 2
- *
- * The linux framebuffer layer does not use the syncstart/synclen
- * values but right/left/upper/lower margin values. The comments
- * for the x_margin explain how to calculate those from given
- * panel sync timings.
- */
-static struct fb_videomode nl6448bc26 = {
- .name = "NL6448BC26",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 39683, /* in picoseconds! */
- .hsync_len = 30,
- .vsync_len = 2,
- .left_margin = 114, /* HTOT - (HSYNSLEN + HSYNSTART) */
- .right_margin = 16, /* HSYNSTART - XRES */
- .upper_margin = 33, /* VTOT - (VSYNLEN + VSYNSTART) */
- .lower_margin = 10, /* VSYNSTART - YRES */
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
-};
-
-static struct sh7760fb_platdata sh7760fb_nl6448 = {
- .def_mode = &nl6448bc26,
- .ldmtr = LDMTR_TFT_COLOR_16, /* 16bit TFT panel */
- .lddfr = LDDFR_8BPP, /* we want 8bit output */
- .ldpmmr = 0x0070,
- .ldpspr = 0x0500,
- .ldaclnr = 0,
- .ldickr = LDICKR_CLKSRC(LCDC_CLKSRC_EXTERNAL) |
- LDICKR_CLKDIV(1),
- .rotate = 0,
- .novsync = 1,
- .blank = NULL,
-};
-
-/* SH7760:
- * 0xFE300800: 256 * 4byte xRGB palette ram
- * 0xFE300C00: 42 bytes ctrl registers
- */
-static struct resource sh7760_lcdc_res[] = {
- [0] = {
- .start = 0xFE300800,
- .end = 0xFE300CFF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 65,
- .end = 65,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh7760_lcdc_dev = {
- .dev = {
- .platform_data = &sh7760fb_nl6448,
- },
- .name = "sh7760-lcdc",
- .id = -1,
- .resource = sh7760_lcdc_res,
- .num_resources = ARRAY_SIZE(sh7760_lcdc_res),
-};
-
-====================== cut here ======================================