summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon/f71805f
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/hwmon/f71805f')
-rw-r--r--Documentation/hwmon/f71805f36
1 files changed, 25 insertions, 11 deletions
diff --git a/Documentation/hwmon/f71805f b/Documentation/hwmon/f71805f
index 48a356084bc6..1efe5e5d337c 100644
--- a/Documentation/hwmon/f71805f
+++ b/Documentation/hwmon/f71805f
@@ -2,17 +2,29 @@ Kernel driver f71805f
=====================
Supported chips:
+
* Fintek F71805F/FG
+
Prefix: 'f71805f'
+
Addresses scanned: none, address read from Super I/O config space
+
Datasheet: Available from the Fintek website
+
* Fintek F71806F/FG
+
Prefix: 'f71872f'
+
Addresses scanned: none, address read from Super I/O config space
+
Datasheet: Available from the Fintek website
+
* Fintek F71872F/FG
+
Prefix: 'f71872f'
+
Addresses scanned: none, address read from Super I/O config space
+
Datasheet: Available from the Fintek website
Author: Jean Delvare <jdelvare@suse.de>
@@ -64,24 +76,26 @@ you can only set the limits in steps of 32 mV (before scaling).
The wirings and resistor values suggested by Fintek are as follow:
- pin expected
- name use R1 R2 divider raw val.
-
+======= ======= =========== ==== ======= ============ ==============
+in pin expected
+ name use R1 R2 divider raw val.
+======= ======= =========== ==== ======= ============ ==============
in0 VCC VCC3.3V int. int. 2.00 1.65 V
in1 VIN1 VTT1.2V 10K - 1.00 1.20 V
-in2 VIN2 VRAM 100K 100K 2.00 ~1.25 V (1)
-in3 VIN3 VCHIPSET 47K 100K 1.47 2.24 V (2)
+in2 VIN2 VRAM 100K 100K 2.00 ~1.25 V [1]_
+in3 VIN3 VCHIPSET 47K 100K 1.47 2.24 V [2]_
in4 VIN4 VCC5V 200K 47K 5.25 0.95 V
in5 VIN5 +12V 200K 20K 11.00 1.05 V
in6 VIN6 VCC1.5V 10K - 1.00 1.50 V
-in7 VIN7 VCORE 10K - 1.00 ~1.40 V (1)
+in7 VIN7 VCORE 10K - 1.00 ~1.40 V [1]_
in8 VIN8 VSB5V 200K 47K 1.00 0.95 V
-in10 VSB VSB3.3V int. int. 2.00 1.65 V (3)
-in9 VBAT VBATTERY int. int. 2.00 1.50 V (3)
+in10 VSB VSB3.3V int. int. 2.00 1.65 V [3]_
+in9 VBAT VBATTERY int. int. 2.00 1.50 V [3]_
+======= ======= =========== ==== ======= ============ ==============
-(1) Depends on your hardware setup.
-(2) Obviously not correct, swapping R1 and R2 would make more sense.
-(3) F71872F/FG only.
+.. [1] Depends on your hardware setup.
+.. [2] Obviously not correct, swapping R1 and R2 would make more sense.
+.. [3] F71872F/FG only.
These values can be used as hints at best, as motherboard manufacturers
are free to use a completely different setup. As a matter of fact, the