summaryrefslogtreecommitdiffstats
path: root/Documentation/isdn/INTERFACE.fax
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/isdn/INTERFACE.fax')
-rw-r--r--Documentation/isdn/INTERFACE.fax163
1 files changed, 0 insertions, 163 deletions
diff --git a/Documentation/isdn/INTERFACE.fax b/Documentation/isdn/INTERFACE.fax
deleted file mode 100644
index 9c8c6d914ec7..000000000000
--- a/Documentation/isdn/INTERFACE.fax
+++ /dev/null
@@ -1,163 +0,0 @@
-$Id: INTERFACE.fax,v 1.2 2000/08/06 09:22:50 armin Exp $
-
-
-Description of the fax-subinterface between linklevel and hardwarelevel of
- isdn4linux.
-
- The communication between linklevel (LL) and hardwarelevel (HL) for fax
- is based on the struct T30_s (defined in isdnif.h).
- This struct is allocated in the LL.
- In order to use fax, the LL provides the pointer to this struct with the
- command ISDN_CMD_SETL3 (parm.fax). This pointer expires in case of hangup
- and when a new channel to a new connection is assigned.
-
-
-Data handling:
- In send-mode the HL-driver has to handle the <DLE> codes and the bit-order
- conversion by itself.
- In receive-mode the LL-driver takes care of the bit-order conversion
- (specified by +FBOR)
-
-Structure T30_s description:
-
- This structure stores the values (set by AT-commands), the remote-
- capability-values and the command-codes between LL and HL.
-
- If the HL-driver receives ISDN_CMD_FAXCMD, all needed information
- is in this struct set by the LL.
- To signal information to the LL, the HL-driver has to set the
- parameters and use ISDN_STAT_FAXIND.
- (Please refer to INTERFACE)
-
-Structure T30_s:
-
- All members are 8-bit unsigned (__u8)
-
- - resolution
- - rate
- - width
- - length
- - compression
- - ecm
- - binary
- - scantime
- - id[]
- Local faxmachine's parameters, set by +FDIS, +FDCS, +FLID, ...
-
- - r_resolution
- - r_rate
- - r_width
- - r_length
- - r_compression
- - r_ecm
- - r_binary
- - r_scantime
- - r_id[]
- Remote faxmachine's parameters. To be set by HL-driver.
-
- - phase
- Defines the actual state of fax connection. Set by HL or LL
- depending on progress and type of connection.
- If the phase changes because of an AT command, the LL driver
- changes this value. Otherwise the HL-driver takes care of it, but
- only necessary on call establishment (from IDLE to PHASE_A).
- (one of the constants ISDN_FAX_PHASE_[IDLE,A,B,C,D,E])
-
- - direction
- Defines outgoing/send or incoming/receive connection.
- (ISDN_TTY_FAX_CONN_[IN,OUT])
-
- - code
- Commands from LL to HL; possible constants :
- ISDN_TTY_FAX_DR signals +FDR command to HL
-
- ISDN_TTY_FAX_DT signals +FDT command to HL
-
- ISDN_TTY_FAX_ET signals +FET command to HL
-
-
- Other than that the "code" is set with the hangup-code value at
- the end of connection for the +FHNG message.
-
- - r_code
- Commands from HL to LL; possible constants :
- ISDN_TTY_FAX_CFR output of +FCFR message.
-
- ISDN_TTY_FAX_RID output of remote ID set in r_id[]
- (+FCSI/+FTSI on send/receive)
-
- ISDN_TTY_FAX_DCS output of +FDCS and CONNECT message,
- switching to phase C.
-
- ISDN_TTY_FAX_ET signals end of data,
- switching to phase D.
-
- ISDN_TTY_FAX_FCON signals the established, outgoing connection,
- switching to phase B.
-
- ISDN_TTY_FAX_FCON_I signals the established, incoming connection,
- switching to phase B.
-
- ISDN_TTY_FAX_DIS output of +FDIS message and values.
-
- ISDN_TTY_FAX_SENT signals that all data has been sent
- and <DLE><ETX> is acknowledged,
- OK message will be sent.
-
- ISDN_TTY_FAX_PTS signals a msg-confirmation (page sent successful),
- depending on fet value:
- 0: output OK message (more pages follow)
- 1: switching to phase B (next document)
-
- ISDN_TTY_FAX_TRAIN_OK output of +FDCS and OK message (for receive mode).
-
- ISDN_TTY_FAX_EOP signals end of data in receive mode,
- switching to phase D.
-
- ISDN_TTY_FAX_HNG output of the +FHNG and value set by code and
- OK message, switching to phase E.
-
-
- - badlin
- Value of +FBADLIN
-
- - badmul
- Value of +FBADMUL
-
- - bor
- Value of +FBOR
-
- - fet
- Value of +FET command in send-mode.
- Set by HL in receive-mode for +FET message.
-
- - pollid[]
- ID-string, set by +FCIG
-
- - cq
- Value of +FCQ
-
- - cr
- Value of +FCR
-
- - ctcrty
- Value of +FCTCRTY
-
- - minsp
- Value of +FMINSP
-
- - phcto
- Value of +FPHCTO
-
- - rel
- Value of +FREL
-
- - nbc
- Value of +FNBC (0,1)
- (+FNBC is not a known class 2 fax command, I added this to change the
- automatic "best capabilities" connection in the eicon HL-driver)
-
-
-Armin
-mac@melware.de
-