summaryrefslogtreecommitdiffstats
path: root/Documentation/networking/switchdev.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/switchdev.txt')
-rw-r--r--Documentation/networking/switchdev.txt59
1 files changed, 59 insertions, 0 deletions
diff --git a/Documentation/networking/switchdev.txt b/Documentation/networking/switchdev.txt
new file mode 100644
index 000000000000..f981a9295a39
--- /dev/null
+++ b/Documentation/networking/switchdev.txt
@@ -0,0 +1,59 @@
+Switch (and switch-ish) device drivers HOWTO
+===========================
+
+Please note that the word "switch" is here used in very generic meaning.
+This include devices supporting L2/L3 but also various flow offloading chips,
+including switches embedded into SR-IOV NICs.
+
+Lets describe a topology a bit. Imagine the following example:
+
+ +----------------------------+ +---------------+
+ | SOME switch chip | | CPU |
+ +----------------------------+ +---------------+
+ port1 port2 port3 port4 MNGMNT | PCI-E |
+ | | | | | +---------------+
+ PHY PHY | | | | NIC0 NIC1
+ | | | | | |
+ | | +- PCI-E -+ | |
+ | +------- MII -------+ |
+ +------------- MII ------------+
+
+In this example, there are two independent lines between the switch silicon
+and CPU. NIC0 and NIC1 drivers are not aware of a switch presence. They are
+separate from the switch driver. SOME switch chip is by managed by a driver
+via PCI-E device MNGMNT. Note that MNGMNT device, NIC0 and NIC1 may be
+connected to some other type of bus.
+
+Now, for the previous example show the representation in kernel:
+
+ +----------------------------+ +---------------+
+ | SOME switch chip | | CPU |
+ +----------------------------+ +---------------+
+ sw0p0 sw0p1 sw0p2 sw0p3 MNGMNT | PCI-E |
+ | | | | | +---------------+
+ PHY PHY | | | | eth0 eth1
+ | | | | | |
+ | | +- PCI-E -+ | |
+ | +------- MII -------+ |
+ +------------- MII ------------+
+
+Lets call the example switch driver for SOME switch chip "SOMEswitch". This
+driver takes care of PCI-E device MNGMNT. There is a netdevice instance sw0pX
+created for each port of a switch. These netdevices are instances
+of "SOMEswitch" driver. sw0pX netdevices serve as a "representation"
+of the switch chip. eth0 and eth1 are instances of some other existing driver.
+
+The only difference of the switch-port netdevice from the ordinary netdevice
+is that is implements couple more NDOs:
+
+ ndo_switch_parent_id_get - This returns the same ID for two port netdevices
+ of the same physical switch chip. This is
+ mandatory to be implemented by all switch drivers
+ and serves the caller for recognition of a port
+ netdevice.
+ ndo_switch_parent_* - Functions that serve for a manipulation of the switch
+ chip itself (it can be though of as a "parent" of the
+ port, therefore the name). They are not port-specific.
+ Caller might use arbitrary port netdevice of the same
+ switch and it will make no difference.
+ ndo_switch_port_* - Functions that serve for a port-specific manipulation.